Professional Documents
Culture Documents
Single-Ply
Peel & Stick
Reverse
Engravable
LG302-911
Sheet Construction
LG322-911
Sheet Construction
1. Glow .015
2. White Cap* .005
3. Adhesive: 3M-9502
1. Clear .030
2. Glow .015
3. White Cap* .005
LaserGlow: .015
DIN Standard
129
16.6
20
2.8
DIN Standard
1162 minutes
(19.36 hours)
340 minutes
5.66 hours)
.3
New York City (NYC) Local Law 26 of 2004 in accordance with ISO 17398. All commercial high-rise buildings
over 75 feet tall. Excitation of 21.6 lux for 120 minutes.
Time (Minutes)
LaserGlow: .015
10
60
37.6
8.8
30
7
90
5.7
LaserGlow
LaserGlow: .015
IMO Standard
65.6
39.4
28
22.1
18.4
15
-
50
13.9
11.2
9.4
60
8.1
10
15
20
30
40
Lasering LaserGlow:
LaserGlow's construction makes it extremely laser
friendly.
Rowmark internal testing has determined that there are
no
unique challenges when lasering LaserGlow.
Performance
is similar to other Rowmark laserable materials.
For best results: Design files for fabrication using a sans
serif font with a character height greater then 1.
Vector Cutting Settings:
For best results, leave masking on the material when
Specifications:
Material Modified impact acrylic
Finish Matte
Sheet Size 24 x 48 (610 x 1219mm)
Peel and Stick
Thickness1-ply: .020 (0.508mm)
Reverse Engrvable
Thickness 2-ply: .050 (1.27mm)
(Gauges are approximate.)
Fabrication Laser
Router
Rotating carbide
Cutting Depth .022 - .025
(.56mm - .64mm)
LaserGlow
Cleaning LaserGlow:
The following cleaning agents should be used to clean LaserGlow:
Window Cleaner
Dish Soap (non citrus)
Bleach Cleaner (Clorax)
Furniture Polish (Pledge)
PineSol Cleaner
Novus Plastic Polish Level 1
Lysol Spray
Rubbing Alcohol
Lighter Fluid
Formula 409
1. As a general rule, Rowmark recommends using mild soap and water whenever possible.
2. Test a piece of scrap or small area of the material before cleaning entire piece. 3. Use only soft cloths or sponges for
cleaning. Do not use Brillo/S.O.S. pads or steel wool.
4. Use a Q-Tip to clean small areas
5. Rinse with warm water.
6. Ultrasonic cleaning is NOT RECOMMENDED for any Rowmark product.
7. To remove dust from engraved areas, try compressed air before any solvent cleaner.
8. Cleaners with abrasives, such as Comet brand cleaner, are not recommended.
For a complete list of recommended/non-recommended cleaning agents, please visit
http://www.rowmark.com/MARK/techhelpdocs/working_with_sheet/sheet.asp and click on the link: How to Clean Rowmark
Products.
LaserGlow
FIRE
HOSE
EXIT
EXIT TO STREET LEVEL