Professional Documents
Culture Documents
Generally the switching device of positive converter group goes in conduction during
positive half cycle whereas the negative converter group goes in conduction during
negative half cycle of the input wave shape. The control circuit controls the operation
of each converter group and provides synchronization of the output signal with the
input signal.
Fig: 4.1 Circuit diagram of design & implementation of cyclo-converter using microcontroller
21
Delay (7);
Digital Write (T3, LOW)
Delay (3);
F/2 pulses
Delay (3);
Digital Write (T4, HIGH);
Delay (3);
Delay (7);
Digital Write (T4, LOW);
Delay (3);
Digital Write (T2, HIGH);
Delay (7);
Digital Write (T2, LOW);
}
}
prev_v = analog Read (input wave);
Delay (1);
next_v = analog Read (input wave);
If (prev_v == 0 and next_v > 0)
{
If (quarter <=1040 and quarter >= 1010)
{
Digital Write (T1, HIGH);
Delay (7);
Digital Write (T1, LOW);
22
Delay (3);
Digital Write (T3, HIGH);
Delay (7);
Digital Write (T3, LOW);
Delay (3);
Digital Write (T1, HIGH);
Delay (7);
Digital Write (T1, LOW);
Delay (3);
Digital Write (T3, HIGH);
Delay (7);
Digital Write (T3, LOW);
Delay (3);
F/4
pulses
Fig: 4.2 practical kit of design and implementation of cycloconverter using micro controller
24
25
26