Professional Documents
Culture Documents
com
Table D120-9/E
HMP-011
HM-013
A1
B1
A1
B1
A1
B1
KM =
MODEL CODE
HM
011
210
/V
/*
**
Synthetic fluids:
WG = water glycol
PE = phosphate ester
Series number
Options:
/V = setting adjustment by handwheel instead of a grub screw protected by cap
Only for HMP:
/R = reduced leakage for special applications
/VF = regulating knob
/VS = regulating knob with safety locking
KM-012/***/V
1
HM =
Pressure range
for HMP:
50 = 2 50 bar
100 = 3100 bar
210 = 10210 bar
350 = 15350 bar
HYDRAULIC CHARACTERISTICS
Hydraulic configuration
HMP-011
HM-011
HMP-012
HM-012
KM-011
KM-012
Valve model
Max flow
Pressure range
[l/min]
HMP-013
HM-013
HMP-014
HM-014
HMP-015
HM-015
KM-013
KM-014
KM-015
HMP
HM
KM
35
60
120
Any position
Roughness index
Ambient temperature
-20C to +70
Fluid
Hydraulic oil as per DIN 51524 ... 535; for other fluids see section 1
Recommended viscosity
ISO 19/16, achieved with in line filters at 25 m value and 25 >75 (recommended)
Fluid temperature
REGULATED PRESSURE VERSUS FLOW DIAGRAMS (Based on mineral oil ISO VG 46 at 50C)
HMP
KM
Regulated pressure at port P [bar]
HM
MINIMUM PRESSURE VERSUS FLOW DIAGRAMS (Based on fluid viscosity of 25 mm2/s at 40C)
HM
HMP
KM
Min. regulated pressure [bar]
HMP-011
Mass: 1,4 Kg
HMP-012
Mass: 1,7 Kg
HMP-013
HMP-014
Mass: 1,2 Kg
In the version -014 the regulating element is on side of port
B (dotted line) instead of side
of port A.
HMP-015
Mass: 1,7 Kg
Adjustment device
for option /VF and /VS
View from X
Fastening bolts: n 4 socket head screws M5. The lenght depends on number and type of modular elements associated.
HM-011
HM-014
Mass: 1,1 Kg
HM-012
HM-015
Mass: 1,3 Kg
HM-013
Mass: 1,1 Kg
View from X
Fastening bolts: n 4 socket head screws M5. The lenght depends on number and type of modular elements associated.
D120
KM-011
Mass: 2,5 Kg
KM-012
Mass: 2,8 Kg
KM-013
Mass: 2,5 Kg
KM-014
Mass: 2,5 Kg
KM-015
Mass: 2,5 Kg
View from X
Fastening bolts: n 4 socket head screws M6. The lenght depends on number and type of modular elements associated.
10/07