You are on page 1of 2

Renderoc Putty

constructive solutions

Single component fine quality putty of


polymer, fine graded filler and biocides,
for good stability
Uses

Application instructions

Renderoc Putty is a high performance acrylic based


grade, water borne, incorporated with fine graded filler
designed for application from feather edge to 2 mm thick
on concrete surfaces, masonry surfaces, gypsum boards,
wooden surfaces, can be applied over surface
imperfections and for light hairline crack bridging
purposes.

The surface should be stable, firm, dry and free from dust
sand, loose old paints, laitance, dirt, grease, oil and
corrosion deposits.

Advantages

Over-coating can be done after initial cure which is 12


hours at ambient temperature.

Mixing not required, ready to use.


Apply with steel trowel, steel spatula and filling knife.

Asbestos free, chloride free, non-toxic and nonhazardous.

Indicated film thickness:


Dry
Wet

Easy to handle, apply and use.


Excellent bond adhesion to concrete, gypsum and
wooden surfaces.

:
:

350 microns
500 microns

Cleaning
Renderoc Putty should be removed from tools, equipment
and mixers with clean water immediately after use. Cured
material can only be removed mechanically.

Does not require any primer or curing membrane.


Can be applied vertical and overhead.

Estimating

Protect from Algea and Fungal grow and stable for


long term in aggressive environment.

Supply
Suitable for internally and externally.
Renderoc Putty:

Paintable.

5 kg, 25 kg and 30 kg pack

Coverage

Description

2
Approximately 1.7 kg material required to cover 1 m per
1 mm thick (wet film).

Renderoc Putty is a single component product supplied as


ready to use. Its fine quality paste consists of polymer,
fine graded filler and biocides for good stability. The
product is smooth paste white colour as standard. Special
colour is available on request for large orders.

Storage
Shelf life

Technical support

Renderoc Putty has a shelf of 12 months if kept in a cool


store in the original, unopened pack.

Fosroc offers a comprehensive range of high


performance, high quality, and construction products. In
addition, Fosroc offers a technical support packages to
specifiers, end-users and contractors as well as technical
on-site assistance in locations all over the world.

Precautions
Health and safety
Avoid content with skin or eyes. Any skin or eye
contamination should be washed immediately with plenty
of water.
Gloves and protective clothing are
recommended.

Properties
o
35oC
20 C
1.710+0.005 1.700+0.005
Specific gravity:
Tack-free time (minutes): 25+5
15+5
Solid content:
73%
2
Bond adhesive (ASTM D4541):
1.25 N/mm

Fire
Renderoc Putty is non-flammable and non-hazardous.

Page 1

Renderoc Putty
Additional information
Fosroc manufactures a wide range of products specifically
designed for the repair and refurbishment of damaged
reinforced concrete. These include; hand placed and spray
grade repair mortars, fluid micro-concretes, chemicalresistant epoxy mortars and a comprehensive package of
protective coatings.
In addition, a wide range of
complimentary products are available. These include joint
sealants, waterproofing membranes, grouting, anchoring
and specialized flooring materials.
Fosroc have also produced several educational training
videos, which provide more details about the mechanisms,
which cause corrosion within reinforced concrete structures
and the solutions which are available to arrest or retard
these destructive mechanisms.
Further information is
available from the publication:
Concrete Repair and
Protection. The Systematic Approach, available in seven
language formats.
For further information about products, training videos or
publications, contact the local Fosroc office.

Important note:
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions
for the Supply of Goods and Services, copies of which may be obtained on request. Whilst Fosroc endeavours to ensure that
any advice, recommendation, specification of information it may give is accurate and correct, it cannot, because it has no direct
or continuous control over where or how its products are applied, accept any liability either directly or indirectly arising from the
use of its products, whether or not in accordance with any advice, specification, recommendation of information given by it.

Fosam Company Limited


Head Office
Post Box 11081
Jeddah 21453
Saudi Arabia

www.fosroc.com

Telephone: +966 2 637 5345

Fax: +966 2 637 5891

email: fosam@fosroc.com

Regional Offices
Jeddah Sales Office
Jeddah Showroom
Riyadh
Dammam
Khamis Mushayt

Tel: (02) 6080999


Tel: (02) 665 0787
Tel: (01) 482 9303
Tel: (03) 814 1282
Tel: (07) 250 0469

Fax: (02) 635 3330


Fax: (02) 667 4884
Fax: (01) 482 7562
Fax: (03) 814 1581
Fax: (07) 250 0469

Yanbu Tel: (04) 322 4280


Makkah Tel: (02) 542 0869
Medinah Tel: (04) 845 1767
Jubail Tel: (03) 362 3904

Fax: (04) 391 2980


Fax: (02) 542 0869
Fax: (04) 846 3195
Fax: (03) 362 3875

Registered Office: Industrial Area, Phase 4, Road No. 414, Street No. 407

Page 2

FO SA/Renderoc Putty/05/A

You might also like