Professional Documents
Culture Documents
GENERAL INTRODUCTION
ipe Shields Inc. pioneered the first insulated pipe support, in 1971, for use on HVAC and plumbing
lines. These supports were designed because fiberglass pipe insulation is not strong enough to carry
the load at the point of support without crushing. The various methods contractors employed to
compensate for this weakness were inconsistent, non-uniform and labor intensive, often resulting in
damage to the vapor barrier and/or pipe insulation. The insulated pipe support filled the need for an
energy efficient, economical and practical support.
Pipe Shields Inc. has developed a large and growing family of insulated pipe supports, using its
standard concept of incorporating materials strong enough to carry the load while insulating the pipe at
the same time. No welding to the pipe is required (except for insulated positive anchors and insulated
pipe riser clamps) and no direct metal-to-metal heat path exists. Insulated pipe supports meet an
assortment of requirements, including:
Anchors
Pipe Hangers
Pipe Riser Clamps
Thermal Growth Small or Large
Maximum Support Spacing
Light, Medium or Heavy Loads
Ultra-High Temperatures
Minimum Overhead Clearance
Minimum Horizontal Clearance
Minimum Field Labor
Minimum Friction Loads
Easy Installation
Other products designed, manufactured and supplied not included in this catalog are:
1.
2.
3.
4.
5.
Cryogenic supports
Seismic pipe restraints
Heat-traced pre-insulated pipe supports
Pipe supports used in computer chip, styrene plants and oil refineries
Pipe supports for solar energy projects to accommodate expansion travels in excess of 5- 0
Our highly sophisticated products are a direct result of years of research, engineering and design to
develop cost efficient products for the power, petrochemical, chemical and commercial markets. We
work closely with engineering firms and in-house engineering departments of owners to provide working
solutions to meet their engineering challenges. We have established proprietary specifications that have
now become an industry standard used by owners, engineers and contractors throughout the world
markets.
If you have a pipe support need not met by any of the items described in this catalog, please contact us at
713-731-0030 or 1-800-787-5914.
CATALOG PS-2004
FRONEK GROUP
Temperature
Calcium Silicate
+40oF to + 1200 oF
Urethane
-275 F to +275 F
Foamglas
-450 F to +900 F
Material Variances
Our standard paint finish is SP150 Red Oxide Primer which meets full EPA and California safety
regulations. Other paint finished are available upon request:
Hot dipped galvanized
In-organic zinc (CZ11HS)
Dupont (Corlar) 25P epoxy
SP145 grey oxide
Carbothane 134HG
Carbozinc 859
Slide plate material and other field welded material are coated with deoxaluminate (silver coating)
CATALOG PS-2004
Example: B1000U
Example: B1000UF
Example: B1000CF
FRONEK GROUP
SERVICE
A. Water
B. Steam, Gas, or Air
2.
APPLICATION
A. Pipe supported from below
B.
a. On flat surface
b. On pipe roll
Pipe supported from above
a. In clevis or 2-bolt hanger
SERVICE
WATER
TABLE 1
TABLE 2
TABLE 3
TABLE 4
TABLE 5
TABLE 6
STEAM
GAS
OR AIR
X
X
APPLICATION
PIPE SUPPORTED
FROM BELOW
FROM ABOVE
IN CLEVIS OR
ON FLAT
ON
2-BOLT HANGER
SURFACE PIPE ROLL
X
X
X
X
X
X
X
X
The product data sheets describing each model refer to other models in the catalog with features such as
load rating, axial or lateral travel, or restraint, etc. which you may have an interest.
If you have a pipe support need not met by any of the items described in this catalog, please contact us at
713-731-0030 or 1-800-787-5914.
CATALOG PS-2004
FRONEK GROUP
TABLE 1
SERVICE:
APPLICATION:
WATER
PIPE SUPPORTED FROM BELOW ON FLAT SURFACE
The maximum hanger spacing s hown in Table 1 are derived from load ratings (see Product Data Sheets) of
Pipe Shields Inc. models, assuming weight of standard pipe, water, and 2" insulation. The custom er should be
guided by the hanger spacings allowed by the applicable code or the project engineers' specifications before making
a selection. Refer to the appropriate Product Data Sheets for additional information s uch as load rating,
compensation for temperature, axial or lateral travel, or res traint, etc.
Example:
Given:
Pipe Diameter: 8" standard weight
Service:
Water
20' - 0
Support Spacing:
Determine:
Insulated pipe support model number
Method:
In table 1, for 8" pipe size, find the model(s) rated for handling 20'- 0 or greater
support spacing. In this case, Model A7200 is selected since it is capable of handling 21'-0 support
spacing. The Index Sheets to Sections "A" & "B" indicate some of the differences between models.
Check Product Data Sheet for description before making a final selection. In this example, if the
support is required to handle +/-4 1/2" of axial travel, Model B2000 would be selected (Section "B"
Index & Product Data Sheet B2000).
CATALOG PS-2004
FRONEK GROUP
TABLE 2
SERVICE:
APPLICATION:
The maximum hanger spac ing shown in Table 2 are derived from load ratings (see Product Data Sheets) of
Pipe Shields Inc. models, assuming weight of standard pipe, and 2" insulation. The customer should be guided by
the hanger spacings allowed by the applicable code or the project engineers' specifications before making a
selection. Refer to the appropriate Product Data Sheets for additional information such as load rating, compensation
for temperature, axial or lateral travel, or restraint, etc.
Example:
Given:
Pipe Diameter: 8" standard weight
Service:
Steam
Support Spacing:
30' - 0
Determine:
Insulated pipe support model number
Method:
In table 2, for 8" pipe size, find the model(s) rated for handling 30'- 0 or greater
support spacing. In this case, Model A7200 is selected since it is capable of handling 35'-0 support
spacing. The Index Sheets to Sections "A" & "B" indicate some of the differences between models.
Check Product Data Sheet for description before making a final selection. In this example, if the
support is required to handle +/-4 1/2" of axial travel, Model B2000 would be selected (Section "B"
Index & Product Data Sheet B2000).
CATALOG PS-2004
FRONEK GROUP
TABLE 3
SERVICE:
APPLICATION:
WATER
PIPE SUPPORTED FROM ABOVE IN CLEVIS OR 2-BOLT HANGER
MAXIMUM HANGER SUPPORT SPACING - FEET
FOR VARIOUS PIPE SH IELDS, INC.
PRE-INSULATED PIPE SUPPORT MODEL S
D1000
D2000
ASME A1000 A3000
D4000 D3000 D3100 D3200 D3300
B31.1 A2000 A4000 A9000 D5000 D6000 D6100 D6200 D6300
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
30
Note:
Clevis Hanger
11
12
13
12
13
15
14
15
17
16
18
19
17
18
21
16
18
21
17
18
20
16
17
19
16
18
19
15
16
19
14
15
16
13
13
15
12
13
14
11
12
13
11
12
13
10
11
12
9
10
11
9
9
10
8
9
2-Bolt Hanger
19
22
29
24
25
22
22
21
21
22
24
22
20
21
18
16
15
11
40
40
32
28
26
23
26
22
18
19
13
40
33
28
29
19
37
38
26
The maximum hanger spacing shown in Table 3 are derived from load ratings (see Product Data Sheets) of
Pipe Shields Inc. models, assuming weight of standard pipe, water, and 2" insulation. The customer should be
guided by the hanger spacings allowed by the applicable code or the project engineers' specifications before making
aection. Refer to the appropriate Product Data Sheets for additional information such as load rating,
compensation for temperature, axial or lateral travel, or res traint, etc.
Example:
(Ref)
7
7
7
9
10
11
12
13
14
16
17
19
22
23
25
27
28
30
32
33
Given:
Pipe Diameter: 8" standard weight
Service:
Water
Support Spacing:
20' - 0
Determine:
Insulated pipe support model number
Method:
In table 3, for 8" pipe size, find the model(s) rated for handling 20"- 0 or greater
support spacing. In this case, Model D3000 is selected since it is capable of handling 22'-0 support spacing.
The Index Sheets to Sections "A" & "D" indicate some of the differences between models. Check Product
Data Sheet for description before making a final selection. In this example, if the clearance is above the
support limited, Model D6000 might be selected (Section "D" Index & Product Data Sheet D6000).
CATALOG PS-2004
FRONEK GROUP
TABLE 4
SERVICE:
APPLICATION:
D1000
D2000
ASME A1000 A3000
D4000 D3000 D3100 D3200 D3300
B31.1 A2000 A4000 A9000 D5000 D6000 D6100 D6200 D6300
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
30
Note:
(Ref)
8
9
9
12
13
14
15
16
17
19
21
24
26
30
32
35
37
39
42
44
Clevis Hanger
11
12
13
12
13
15
15
16
19
19
20
22
20
22
25
20
22
25
21
24
26
21
23
25
23
24
26
22
24
28
22
23
24
21
22
25
20
22
24
20
21
24
21
23
25
21
22
25
21
22
25
21
22
25
20
21
24
2-Bolt Hanger
21
26
36
29
32
29
31
30
32
25
40
40
38
40
40
38
40
34
55
55
52
45
45
55
55
49
44
50
51
60
60
60
60
60
60
65
65
65
The maximum hanger spacing shown in Table 4 are derived from load ratings (see Product Data Sheets) o
Pipe Shields Inc. models, assuming weight of standard pipe, and 2" insulation. The customer should be guided by
the hanger spacings allowed by the applicable code or the project engineers' specifications before making a
selection. Refer to the appropriate Product Data Sheets for additional information such as load rating, compensation
for temperature, axial or lateral travel, or restraint, etc.
Example:
Given:
Pipe Diameter: 8" standard weight
Service:
Steam
Support Spacing:
24' - 0
Determine:
Insulated pipe support model number
Method:
In table 4, for 8" pipe size, find the model(s) rated for handling 24'- 0 or greater
support spacing. In this case, Model A9000 is selected since it is capable of handling 25'-0 support spacing.
The Index Sheets to Sections "A" & "D" indicate some of the differences between models. Check Product
Data Sheet for description before making a final selection. In this example, if the clearance is above the
support limited, Model D6000 might be selected (Section "D" Index & Product Data Sheet D6000).
CATALOG PS-2004
FRONEK GROUP
TABLE 5
SERVICE:
APPLICATION:
WATER
PIPE SUPPORTED FROM BELOW ON PIPE ROLL
MAXIMUM HANGER SUPPORT SPACING - FEET
FOR VARIOUS PIPE SH IELDS, INC.
PRE-INSULATED PIPE SUPPORT MODEL S
ASME
A3000
A5000
B31.1
A4000
A6000 A8000 A8200 A8400
Light Insutrial w/Load
Pipe
Distribution Plate
Size (Ref) Commercial
1/2
3/4
1
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
30
Note:
12
13
13
15
15
12
12
12
13
15
15
12
15
14
12
9
18
17
16
16
15
13
10
10
12
11
10
9
8
24
19
16
23
21
19
17
15
12
9
22
31
28
25
23
20
16
12
The maximum hanger spacing shown in Table 5 are derived from load ratings (see Product Data Sheets) of
Pipe Shields Inc. models, assuming weight of standard pipe, water, and 2" insulation. The customer should be
guided by the hanger spacings allowed by the applicable code or the project engineers' specifications before making
a selection. Refer to the appropriate Product Data Sheets for additional information such as load rating,
compensation for temperature, axial or lateral travel, or res traint, etc.
Example:
7
7
7
9
10
11
12
13
14
16
17
19
22
23
25
27
28
30
32
33
Given:
Pipe Diameter: 8" standard weight
Service:
Water
Support Spacing:
18' - 0
Determine:
Insulated pipe support model number
Method:
In table 5, for 8" pipe size, find the model(s) rated for handling 18'- 0 or greater
support spacing. In this case, Model A8200 is selected since it is capable of handling 19'-0 support spacing.
The Index Sheet to Section "A" indicates some of the differences between models. Check Product Data
Sheet for description before making a final selection. If greater support spacings are desired, see Section "B"
(Base Mounted Supports).
CATALOG PS-2004
FRONEK GROUP
TABLE 6
SERVICE:
APPLICATION:
Note:
8
9
9
12
13
14
15
16
17
19
21
24
26
30
32
35
37
39
42
44
48
50
12
13
14
17
18
15
15
16
17
18
19
19
20
20
18
15
11
13
13
13
12
12
11
9
8
22
21
21
23
22
20
17
17
23
22
22
21
20
18
16
13
11
36
31
27
40
40
39
38
36
33
29
24
20
38
50
50
50
50
49
44
39
The maximum hanger spacing shown in Table 6 are derived from load ratings (see Product Data Sheets) of
Pipe Shields Inc. models, assuming weight of standard pipe, and 2" insulation. The customer should be guided by
the hanger spacings allowed by the applicable code or the project engineers' specifications before making a
selection. Refer to the appropriate Product Data Sheets for additional information such as load rating, compensation
for temperature, axial or lateral travel, or restraint, etc.
Example:
Given:
Pipe Diameter: 8" standard weight
Service:
Steam
Support Spacing:
25' - 0
Determine:
Insulated pipe support model number
Method:
In table 6, for 8" pipe size, find the model (s) rated for handling 25'-0 or greater
support spacing. In this case, Model A8200 is selected since it is capable of handling 25'-0 or 31'-0 support
spacing. The Index Sheet to Section "A" indicates some of the differences between models. Check Product
Data Sheet for description before making a final selection. If greater support spacings are desired, see
Section "B" (Base Mounted Supports).
CATALOG PS-2004
FRONEK GROUP
INTRODUCTION
FRONEK GROUP
SECTION A
INTRODUCTION
SECTION A
PRE-INSULATED PIPE SUPPORTS
APPLICATION Commercial and Light Industrial
Most Commercial applications are well served by Models A1000 and A2000, which are
recommended for use on common 10-0 hanger space for small bore pipe sizes (see Selection
Guide). However, should the need arise, because of increased hanger spacing or the manner in
which the insulated support is mounted, heavier duty supports are available.
As is readily seen in the Section Index on the following page, some models are meant for
installation only in a clevis hanger, on a flat surface, or on a pipe roll. Other models may be
installed in any two or all three mounting methods.
The load ratings (see Product Data Sheets) reflect consideration for the manner in which each of
these models will be mounted.
Note that in the A7000 through A7400 Series and the A8000 through A8400 Series, the
higher the model number, the higher the load rating.
We are committed to providing the most economical and appropriate insulated pipe support to
satisfy the requirements of the piping system.
If your requirements are not covered by the Product Data Sheets in this catalog, please contact us at
713-731-0030 or 1-800-787-5914.
Please acquaint yourself with the selection guide at the front of this catalog and the section
index on the page following this introduction, for assistance in determining the most
appropriate support for your application.
CATALOG PS-2004
SECTION A INDEX
FRONEK GROUP
MODEL
PIPE
SIZE
RANGE
A1000
A2000
A3000
A3000
A4000
A4000
1/2 - 24
1/2 - 24
1/2 - 24
1/2 - 4
1/2 - 24
1/2 - 4
A5000
A6000
A7000
A7200
A7400
A8000
A8200
A8400
2 1/2 - 42
2 1/2 - 42
2 1/2 - 42
6 - 42
10 - 30
2 1/2 - 42
6 - 42
10 - 30
X
X
X
X
X
X
X
X
X
X
X
X
X
A9000
1/2 - 24
PRIMARY
APPLICATION
HOT
COLD
INSTALLED ON
FLAT
CLEVIS
PIPE
SURFACE HANGER ROLL
X
X
X
X
X
X
X
X
X
X
TO ORDER, specify:
1. Quantity
2. Pipe Size & Type
3. Insulation Thickness
4. Model Number
EXAMPLE:
X
X
X
(20) 2 x 2-1/2
CATALOG PS-2004
X
X
X
X
X
X
X
X
X
X
X
X
20
2 IPS
2-1/2
A1000
A1000
DUTY
LIGHT
LIGHT
MEDIUM
MEDIUM
MEDIUM
MEDIUM
MED/HEAVY
MED/HEAVY
HEAVY
HEAVIER
HEAVIEST
HEAVY
HEAVIER
HEAVIEST
HEAVY
FRONEK GROUP
Pipe
Size
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
Mult.
Oper.
Temp.
Factor
o
F
"F"
500
0.90
750
0.75
1000
0.50
1200
0.30
TABLE III
The load ratings represent average values obtained in accordance with accepted
methods and are subject to normal manufacturing variations. Dimensions and ratings
are subject to change without notice.
To develop maximum load rating, width of support surface should be at least 1/2 of
dimension "A" in Table II.
To develop maximum load rating, use band, ring or clevis hanger with manufacturer's
load rating equal to or greater than values shown in Table I.
To obtain load ratings for operating temperatures of 500 F and higher, multiply load
rating by factor "F" in Table III.
Iron
Pipe
Size
1/2 - 1 1/2
2
2 1/2 - 4
5
6-7
8 - 10
12 - 18
20 - 24
1/2
A
4
6
6
3/4
B
24
24
20
A
4
6
6
1
B
24
24
20
A
4
6
6
6
6
Application:
Model A1000 is designed for use on:
Hot Water
Vacuum
Gas
Cold Water
Steam
Air
Dual Temperature Chilled Water
Intended for installation on:
Flat Surfaces
Band, ring or clevis pipe hanger
Temperature Range: +40F to +1200F
Note: Up to 1700F available upon request.
Insulation Thickness
1 1/2
2
2 1/2
3
B
A
B
A
B
A
B
A
24
4
24
4
24
4
24
6
24
6
24
6
24
6
24
6
20
6
20
6
20
6
20
9
20
6
20
6
20
6
20
9
20
6
20
6
20
6
20
9
9
16
9
16
9
16
9
12
16
12
16
12
16
12
18
16
18
16
18
16
18
TABLE II "B" = gauge of sheet metal jacket
Features:
MAXIMUM LOAD
RATING (LBS)
On Flat
In Clevis
Surface
Hanger
(a) (c)
(b) (c)
35
40
40
45
65
60
80
70
110
100
140
125
200
150
250
180
300
225
350
270
450
350
400
550
750
450
1000
500
550
1200
575
1400
600
1600
625
1800
675
2000
750
2300
TABLE I
B
24
24
20
20
16
16
16
16
3 1/2
A
B
6
24
6
24
9
20
9
20
9
16
9
16
12
16
18
16
4
A
6
6
9
9
9
9
12
18
B
24
24
20
20
16
16
16
16
Copper
Tubing
Size O.D.
5/8 - 1 5/8
2 1/8
2 5/8 - 4 1/8
5 1/8
6 1/8
8 1/8 -10 1/8
12 1/8
Material Data:
Compact
Easy Installation
Eliminates welding to pipe
Overlapping galvanized sheet metal jacket
Minimizes heat-loss and/or condensation
Copper tubing sizes available
Other I.D.'s and/or O.D.'s available on
request
Clamps available (see G-series)
CATALOG PS-2004
A1
FRONEK GROUP
Pipe
Size
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
Oper.
Mult.
Temp.
Factor
o
F
"F"
0.90
500
750
0.75
1000
0.50
1200
0.30
TABLE III
The load ratings represent average values obtained in accordance with accepted
methods and are subject to normal manufacturing variations. Dimensions and ratings
are subject to change without notice.
To develop maximum load rating, width of support surface should be at least 1/2 of
dimension "A" in Table II.
To develop maximum load rating, use band, ring or clevis hanger with manufacturer's
load rating equal to or greater than values shown in Table I.
3/4
1/2
A
6
6
6
B
24
24
20
A
6
6
6
1
B
24
24
20
A
6
6
6
6
6
Insulation Thickness
1 1/2
3
2
2 1/2
B
A
B
A
B
A
B
A
24
6
24
6
24
6
24
6
24
6
24
6
24
6
24
6
20
6
20
6
20
6
20
9
20
6
20
6
20
6
20
9
20
6
20
6
20
6
20
9
9
16
9
16
9
16
9
12
16
12
16
12
16
12
18
16
18
16
18
16
18
TABLE II "B" = gauge of sheet metal jacket
MAXIMUM LOAD
RATING (LBS)
On Flat
In Clevis
Surface
Hanger
(a) (c)
(b) (c)
35
40
40
45
60
65
80
70
100
110
125
140
150
200
180
250
225
300
270
350
350
450
400
550
450
750
500
1000
1200
550
575
1400
600
1600
625
1800
675
2000
750
2300
TABLE I
To obtain load ratings for operating temperatures of 500F and higher, multiply load
rating by factor "F" in Table III.
Iron
Pipe
Size
1/2 - 1 1/2
2
2 1/2 - 4
5
6-7
8 - 10
12 - 18
20 - 24
Regular Duty w/
Extended Insulation
B
24
24
20
20
16
16
16
16
3 1/2
A
B
6
24
6
24
9
20
9
20
9
16
9
16
12
16
18
16
4
A
6
6
9
9
9
9
12
18
B
24
24
20
20
16
16
16
16
Copper
Tubing
Size O.D.
5/8 - 15/8
2 1/8
2 5/8 - 4 1/8
5 1/8
6 1/8
8 1/8 -10 1/8
12 1/8
Application:
Features:
Material Data:
Compact
Easy Installation
Eliminates welding to pipe
Overlapping galvanized sheet metal jacket
Minimizes heat-loss and/or condensation
Calcium silicate insulation extends 1'' beyond
the galvanized sheet metal jacket providing
for an easier vapor barrier joint with the pipe
insulation
Copper tubing sizes available
Other I.D.'s and/or O.D.'s available on
request
Clamps available see (G-series)
A2
CATALOG PS-2004
FRONEK GROUP
Extra Heavy
Bottom Jacket
MAXIMUM LOAD
RATING (LBS)
On Pipe
In Ring
Pipe On Flat
Roll
or Clevis
Size Surface
Hanger
(a) (d)
(b) (d)
(c) (d)
Oper.
Mult.
40
35
45
1/2
Temp.
Factor
40
45
50
3/4
o
F
"F"
65
60
70
1
500
0.90
80
70
90
1 1/4
750
0.75
110
100
120
1 1/2
1000
0.50
140
125
2
155
1200
0.30
165
150
220
Hardware sold separately
2 1/2
275
Note: For higher load ratings, see A5000, A9000.
TABLE III
200
180
3
250
225
325
3 1/2
300
270
375
4
The load ratings represent average values obtained in accordance with accepted
methods and are subject to normal manufacturing variations. Dimensions and ratings
400
475
5
are subject to change without notice.
450
575
6
500
800
8
525
See
1100
10
To develop maximum load rating, width of support surface should be at least 1/2 of
dimension "A" in Table II.
575
1300
12
600
1500
14
625
A5000
1700
16
Divide "A" in Table II by 6 to find maximum allowable travel on pipe roll (+/- from
centered position).
650
1900
18
700
2100
20
775
2400
24
To develop maximum load rating, use band, ring or clevis hanger with manufacturer's
TABLE I
load rating equal to or greater than values shown in Table I.
Contact factory for other dimensions,
To obtain load ratings for operating temperatures of 500oF and higher, multiply load
temperatures, loads.
rating by factor "F" in Table III.
Available in all insulation thicknesses.
Iron
Insulation Thickness
Copper
Pipe
1 1/2
2
2 1/2
3
3 1/2
4
Tubing
1/2
3/4
1
Size
Size O.D.
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
1/2 - 1 1/2
5/8 -1 5/8
4
24
4
24
4
24
4
24
4
24
4
24
6
24
6
24
6
24
2
2 1/8
6
24
6
24
6
24
6
24
6
24
6
24
6
24
6
24
6
24
2 1/2 - 4
2 5/8 - 4 1/8
6
20
6
20
6
20
6
20
6
20
6
20
9
20
9
20
9
20
5
5 1/8
6
20
6
20
6
20
6
20
9
20
9
20
9
20
6-7
6 1/8
6
20
6
20
6
20
6
20
9
16
9
16
9
16
8 - 10
8 1/8 -10 1/8
9
16
9
16
9
16
9
16
9
16
9
16
12 - 18
12 1/8
12
16
12
16
12
16
12
16
12
16
12
16
20 - 24
18
16
18
16
18
16
18
16
18
16
18
16
TABLE II "B" = gauge of sheet metal jacket (bottom jac ket approx. 2 X ga. of top jacket)
Application:
Features:
Material Data:
Compact
Easy Installation
Eliminates welding to pipe
Overlapping galvanized sheet metal jacket
Minimizes heat-loss and/or condensation
Double thickness bottom jacket for added
structural strength and abrasive wear
resistance
Copper tubing sizes available
Other I.D.'s and/or O.D.'s available on
request
Clamps available (see G-series)
CATALOG PS-2004
A3
FRONEK GROUP
Pipe
Size
Oper.
Mult.
Temp.
Factor
o
F
"F"
500
0.90
750
0.75
1000
0.50
1200
0.30
TABLE III
The load ratings represent average values obtained in accordance with accepted
methods and are subject to normal manufacturing variations. Dimensions and ratings
are subject to change without notice.
To develop maximum load rating, width of support surface should be at least 1/2 of
dimension "A" in Table II.
Divide "A" in Table II by 6 to find maximum allowable travel on pipe roll (+/- from
centered position).
To develop maximum load rating use band, ring or clevis hanger with manufacturer's
load rating equal to or greater than values shown in Table I.
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
MAXIMUM LOAD
RATING (LBS)
On Pipe
In Ring
On Flat
Surface
Roll
or Clevis
Hanger
(c) (d)
(a) (d)
(b) (d)
35
40
45
40
45
50
65
60
70
80
70
90
110
100
120
140
125
155
165
220
150
200
275
180
250
225
325
270
375
300
475
400
575
450
500
800
See
525
1100
575
1300
1500
600
1700
625
A6000
1900
650
700
2100
775
2400
TABLE I
Contact factory for other dimensions,
temperatures, loads.
To obtain load ratings for operating temperatures of 500F and higher, multiply load
Available in all insulation thicknesses.
rating by factor "F" in Table III.
Iron
Insulation Thickness
Copper
Pipe
1/2
3/4
1
1 1/2
2
2 1/2
3 1/2
3
4
Tubing
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
Size
Size O.D.
6
24
6
24
6
24
6
24
6
24
6
24
6
24
6
24
6
24
5/8-1 5/8
1/2 - 1 1/2
6
24
6
24
6
24
6
24
6
24
6
24
6
24
6
24
6
24
2
2 1/8
6
20
6
20
6
20
6
20
6
20
6
20
9
20
9
20
9
20
2 5/8 - 4 1/8
2 1/2 - 4
6
20
6
20
6
20
6
20
9
20
9
20
9
20
5
5 1/8
6
20
6
20
6
20
6
20
9
16
9
16
9
16
6 1/8
6-7
9
16
9
16
9
16
9
16
9
16
9
16
8 1/8 -10 1/8
8 - 10
12
16
12
16
12
16
12
16
12
16
12
16
12 1/8
12 - 18
18
16
18
16
18
16
18
16
18
16
18
16
20 - 24
TABLE II "B" = gauge of sheet metal jacket (bottom jac ket approx. 2 X ga. of top jacket)
Application:
Model A4000 is designed for use on:
Cold Water Chilled Water
Intended for installation on:
Flat Surfaces . Pipe Rolls
Band, ring or clevis pipe hanger
Temperature Range: +40F to +1200F
Note: Up to 1700F available upon request.
A4
Features:
Material Data:
Compact
Easy Installation
Eliminates welding to pipe
Overlapping galvanized sheet metal jacket
Double thickness bottom jacket for added
structural strength and abrasive wear
resistance
CATALOG PS-2004
FRONEK GROUP
Pipe
Size
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Oper.
Mult.
Temp.
Factor
o
F
"F"
500
0.90
750
0.75
1000
0.50
1200
0.30
TABLE II
MAXIMUM LOAD
RATING (LBS)
On Flat
On Pipe
Surface
Roll
(a) (b)
200
250
300
350
450
500
625
650
925
1000
1100
1200
1300
1400
1500
1500
1500
(b)
180
225
270
315
400
450
550
575
825
900
975
1075
1150
1250
1350
1350
1350
9
9
9
9
9
9
9
9
12
12
12
12
12
12
12
12
12
TABLE I
6
6
6
6
6
6
6
6
9
9
9
9
9
9
9
9
9
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
1/2
1/2
1/2
3/4
3/4
3/4
3/4
With load
distribution plate
Max. Axial
Travel
(inches)
on
Pipe Roll
+/2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
Application:
Features:
Compact
Material Data:
Easy Installation
Eliminates welding to pipe
Copper tubing sizes available
Overlapping galvanized sheet metal jacket
Minimizes heat-loss and/or condensation
Load distribution plate integral with bottom
jacket
Other I.D.'s and/or O.D.'s available upon
request
CATALOG PS-2004
A5
FRONEK GROUP
Pipe
Size
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Oper.
Mult.
Temp.
Factor
o
F
"F"
500
0.90
750
0.75
1000
0.50
1200
0.30
TABLE II
MAXIMUM LOAD
RATING (LBS)
On Flat
On Pipe
Surface
Roll
(a) (b)
200
250
300
350
450
500
625
650
925
1000
1100
1200
1300
1400
1500
1500
1500
(b)
180
225
270
315
400
450
550
575
825
900
975
1075
1150
1250
1350
1350
1350
9
9
9
9
9
9
9
9
12
12
12
12
12
12
12
12
12
TABLE I
6
6
6
6
6
6
6
6
9
9
9
9
9
9
9
9
9
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
1/2
1/2
1/2
3/4
3/4
3/4
3/4
Max. Axial
Travel
(inches)
on
Pipe Roll
+/2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
Application:
Model A6000 is designed for use on:
Cold Water
Chilled Water
Intended for installation on:
Flat Surfaces
Pipe Rolls
Features:
Material Data:
Compact
Easy Installation
Eliminates welding to pipe
Copper tubing sizes available
Overlapping galvanized sheet metal jacket
Minimizes heat-loss and/or condensation
Load distribution plate integral with bottom
jacket
Calcium silicate insulation extends 1'' beyond
the galvanized sheet metal jacket providing
for an easier vapor barrier joint with the pipe
Other I.D.'s and/or O.D.'s available on request
Performance Test Results on File:
Available upon request.
A6
CATALOG PS-2004
FRONEK GROUP
Pipe
Size
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
30
36
42
MAXIMUM
LOAD RTG.
(LBS)
On Flat
Surface
(a)
250
300
350
400
500
550
700
875
1600
1650
1850
2000
2100
2300
2500
2500
2500
TABLE I
6
6
6
6
6
6
6
9
9
9
9
9
9
9
9
9
9
3
3
3
3
3
3
3
6
6
6
6
6
6
6
6
6
6
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
3/4
3/4
3/4
3/4
Features:
Compact
Material Data:
Easy Installation
Eliminates welding to pipe
Copper tubing sizes available
Minimizes heat-loss and/or condensation
Insulating structural inserts for load transfer
Overlapping galvanized sheet metal jacket
Other I.D.'s and/or O.D.'s available on request
Load distribution plate integral with bottom
jacket
Performance Test Results on File:
Available upon request.
CATALOG PS-2004
A7
FRONEK GROUP
Pipe
Size
6
8
10
12
14
16
18
20
24
30
36
42
MAXIMUM
LOAD RTG.
(LBS)
On Flat
Surface
(a)
1000
1250
1550
2250
2780
3300
3600
3800
4100
4500
4500
4500
TABLE I
9
9
9
9
9
9
9
9
9
9
9
9
6
6
6
6
6
6
6
6
6
6
6
6
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
1
1
1
1
Application:
Features:
Material Data:
Compact
Easy Installation
Eliminates welding to pipe
Copper tubing sizes available
Minimizes heat-loss and/or condensation
Insulating structural inserts for load transfer
Overlapping galvanized sheet metal jacket
Other I.D.'s and/or O.D.'s available on
request
Load distribution plate integral with bottom
jacket
A8
CATALOG PS-2004
FRONEK GROUP
Pipe
Size
10
12
14
16
18
20
24
30
MAXIMUM
LOAD RTG.
(LBS)
On Flat
Surface
(a)
2100
3400
3900
4400
4800
5100
5500
5500
Table I
9
9
9
9
9
9
9
9
6
6
6
6
6
6
6
6
3/4
3/4
3/4
1
1
1
1
1
Material Data:
Features:
Gas
Air
Compact
Easy Installation
Eliminates welding to pipe
Copper tubing sizes available
Minimizes heat-loss and/or condensation
Insulating structural inserts for load transfer
Overlapping galvanized sheet metal jacket
Other I.D.'s and/or O.D.'s available on
request
Load distribution plate integral with bottom
jacket
Performance Test Results on File:
Available upon request.
CATALOG PS-2004
A9
FRONEK GROUP
Pipe
Size
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
30
36
42
MAXIMUM
LOAD RTG.
(LBS)
On
A
Pipe
Roll
225
9
250
9
300
9
350
9
450
9
500
9
625
9
875
12
1400
12
1475
12
1650
12
1800
12
1875
12
2050
12
2250
12
2250
12
2250
12
TABLE I
6
6
6
6
6
6
6
9
9
9
9
9
9
9
9
9
9
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
3/4
3/4
3/4
3/4
Max. Axial
Travel
(Inches)
on
Pipe Roll
2
2
2
2
2
2
2
4
4
4
4
4
4
4
4
4
4
Gas
Air
Features:
Material Data:
Compact
Easy Installation
Eliminates welding to pipe
Copper tubing sizes available
Minimizes heat-loss and/or condensation
Insulating structural inserts for load transfer
Overlapping galvanized sheet metal jacket
Other I.D.'s and/or O.D.'s available on request
Load distribution plate integral with bottom
jacket
Performance Test Results on File:
Available upon request.
A10
CATALOG PS-2004
FRONEK GROUP
Pipe
Size
6
8
10
12
14
16
18
20
24
30
36
42
MAXIMUM
LOAD RTG.
(LBS)
On
A
Pipe
Roll
900
12
1125
12
1375
12
2550
12
2650
12
2950
12
3200
12
3375
12
3675
12
4050
12
4050
12
4050
12
TABLE I
9
9
9
9
9
9
9
9
9
9
9
9
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
1
1
1
1
Max. Axial
Travel
(Inches)
on
Pipe Roll
3
3
3
3
3
3
3
3
3
3
3
3
Gas
Air
Features:
Material Data:
Compact
Easy Installation
Eliminates welding to pipe
Copper tubing sizes available
Minimizes heat-loss and/or condensation
Insulating structural inserts for load transfer
Overlapping galvanized sheet metal jacket
Other I.D.'s and/or O.D.'s available on request
Load distribution plate integral with bottom
jacket
CATALOG PS-2004
A11
FRONEK GROUP
Pipe
Size
10
12
14
16
18
20
24
30
MAXIMUM
LOAD RTG.
(LBS)
On
A
Pipe
Roll
1875
12
3400
12
3500
12
3950
12
4300
12
4550
12
4950
12
5450
12
TABLE I
9
9
9
9
9
9
9
9
1
1
1
1
1
1
1
1
Max. Axial
Travel
(Inches)
on
Pipe Roll
2 1/4
2 1/4
2 1/4
2 1/4
2 1/4
2 1/4
2 1/4
2 1/4
Material Data:
Features:
Gas
Air
Compact
Easy Installation
Eliminates welding to pipe
Copper tubing sizes available
Minimizes heat-loss and/or condensation
Insulating structural inserts for load transfer
Overlapping galvanized sheet metal jacket
Other I.D.'s and/or O.D.'s Available on
request
Load distribution plate integral with bottom
jacket
A12
CATALOG PS-2004
repellant.
Load distribution Plate: Carbon steel ASTM
A-36
Coating: Primer coated or hot-dip galvanized.
Other coatings Available upon request.
Glue: Industrial contact adhesive.
Formal Submittal Sheets available
FRONEK GROUP
MAXIMUM
LOAD RTG.
(LBS)
Pipe
In Ring
or Clevis
Size
Hanger
(a)
1/2
50
3/4
55
1
80
1 1/4
100
1 1/2
130
2
175
2 1/2
250
3
300
3 1/2
350
4
400
5
550
6
600
8
900
1200
10
1450
12
14
1650
16
1900
18
2150
20
2400
24
2750
TABLE I
1/2
A
4
6
6
B
24
24
20
Insulation Thickness
1 1/2
2
2 1/2
3
3 1/2
A
B
A
B
A
B
A
B
A
B
A
B
A
B
4
24
4
24
4
24
4
24
4
24
6
24
6
24
6
24
6
24
6
24
6
24
6
24
6
24
6
24
6
20
6
20
6
20
6
20
6
20
9
20
9
20
6
20
6
20
6
20
6
20
9
20
9
20
6
20
6
20
6
20
6
20
9
16
9
16
9
16
9
16
9
16
9
16
9
16
12
16
12
16
12
16
12
16
12
16
18
16
18
16
18
16
18
16
18
16
TABLE II "B" = gauge of sheet metal jacket (bottom jac ket approx. 2 X ga. of top jacket)
3/4
Application:
Model A9000 is designed for use on:
Hot Water
Vacuum
Cold Water
Steam
Chilled Water
Dual Temperature
Gas
Air
4
A
6
6
9
9
9
9
12
18
B
24
24
20
20
16
16
16
16
Copper
Tubing
Size O.D.
5/8-1 5/8
2 1/8
2 5/8 - 4 1/8
5 1/8
6 1/8
8 1/8 -10 1/8
12 1/8
Features:
Material Data:
Compact
Easy Installation
Eliminates welding to pipe
Overlapping galvanized sheet metal jacket
Minimizes heat-loss and/or condensation
Insulating structural inserts for load transfer
Copper Tubing available
Other I.D.'s and/or O.D.'s available on
request
CATALOG PS-2004
A13
FRONEK GROUP
INTRODUCTION
FRONEK GROUP
SECTION B
INTRODUCTION
SECTION B
PRE-INSULATED PIPE SUPPORTS - Base Mounted
APPLICATION Heavy Industrial and Large HVAC Distribution Systems
Features:
Accommodation of thermal movement
Provision or lateral guide or restraint
Minimization of side friction loads
Wide range of maximum load requirements for each pipe size
In each model number series (for example: B1000 through B1300 Series), the higher the model
number, the higher the load rating.
Models B1000 - B1300
To meet special thermal movement requirements, Pipe Shields Inc. has provided supports that have
accommodated axial travels in excess of five (5) feet. By modifying our standard pipe support concept
with combinations of structural insulation materials, steel base and strap design, and slide plate
configuration, we can readily and economically respond to virtually any pipe support requirement.
If your requirements are not covered by the Product Data Sheets in this catalog, please contact us at
713-731-0030 or 1-800-787-5914.
Please acquaint yourself with the selection guide at the front of this catalog and the section
index on the page following this introduction, for assistance in determining the most
appropriate support for your application.
CATALOG PS-2004
SECTION B INDEX
FRONEK GROUP
MODEL
PIPE
SIZE
RANGE
TRAVEL
(INCHES) +/AXIAL
LATERAL
B1000
B1100
B1200
B1300
1/2 - 42
1/2 - 42
1/2 - 42
1/2 - 42
1.5
1.5
1.5
1.5
B2000
B2100
B2200
B2300
1/2 - 42
1/2 - 42
1/2 - 42
1/2 - 42
B3000
B3100
B3200
B3300
B4000
B4100
B4200
B4300
LATERAL
GUIDE
DUTY
1.5
1.5
1.5
1.5
NO
NO
NO
NO
MEDIUM
HEAVY
HEAVIER
HEAVIEST
4.5
4.5
4.5
4.5
1.5
1.5
1.5
1.5
NO
NO
NO
NO
MEDIUM
HEAVY
HEAVIER
HEAVIEST
1/2 - 42
1/2 - 42
1/2 - 42
1/2 - 42
1.5
1.5
1.5
1.5
0
0
0
0
YES
YES
YES
YES
MEDIUM
HEAVY
HEAVIER
HEAVIEST
1/2 - 42
1/2 - 42
1/2 - 42
1/2 - 42
4.5
4.5
4.5
4.5
0
0
0
0
YES
YES
YES
YES
MEDIUM
HEAVY
HEAVIER
HEAVIEST
CATALOG PS-2004
SECTION B INDEX
FRONEK GROUP
MODEL
PIPE
SIZE
RANGE
B5000
B5100
B5200
B5300
1/2 - 42
1/2 - 42
1/2 - 42
1/2 - 42
1.5
1.5
1.5
1.5
B6000
B6100
B6200
B6300
1/2 - 42
1/2 - 42
1/2 - 42
1/2 - 42
B7000
B7100
B7200
B7300
B8000
B8100
B8200
B8300
TRAVEL
(INCHES) +/AXIAL
LATERAL
LATERAL
GUIDE
DUTY
1.5 - 4.5
1.5 - 4.5
1.5 - 4.5
1.5 - 4.5
NO
NO
NO
NO
MEDIUM
HEAVY
HEAVIER
HEAVIEST
4.5
4.5
4.5
4.5
1.5 - 4.5
1.5 - 4.5
1.5 - 4.5
1.5 - 4.5
NO
NO
NO
NO
MEDIUM
HEAVY
HEAVIER
HEAVIEST
1/2 - 42
1/2 - 42
1/2 - 42
1/2 - 42
1.5
1.5
1.5
1.5
0
0
0
0
W/SLIDE PADS
W/SLIDE PADS
W/SLIDE PADS
W/SLIDE PADS
MEDIUM
HEAVY
HEAVIER
HEAVIEST
1/2 - 42
1/2 - 42
1/2 - 42
1/2 - 42
4.5
4.5
4.5
4.5
0
0
0
0
W/SLIDE PADS
W/SLIDE PADS
W/SLIDE PADS
W/SLIDE PADS
MEDIUM
HEAVY
HEAVIER
HEAVIEST
CATALOG PS-2004
SECTION B INDEX
FRONEK GROUP
PIPE
SIZE
3 1/2
4 1/2
5 1/2
6 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
30
36
42
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
6
6
6
6
6
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
The Table above provides Bottom-of-Pipe to Top-of Steel dimensions ("B" dimensions) for
3 1/2", 4 1/2", 5 1/2" and 6 1/2 " insulation thicknesses. Check with your salesperson if you
require a "B" dimension other than those shown in this table.
TO ORDER, specify:
1. Quantity
2. Pipe Size & Type
3. Insulation Thickness
4. Model Number
EXAMPLE:
(20) 18 x 2
CATALOG PS-2004
20
18 IPS
2
B1000
B1000
Duty,
MODEL B1000 Sliding Insulated Pipe Support Heavy
Base Mounted
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel, requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B1100 - For greater axial travel, see: B2000 - For lateral restraint, see: B3000 - For lateral travel, see: B5000
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
140
175
225
325
375
460
530
840
1050
1275
1700
2000
2200
2500
2900
3200
3400
3600
4700
5500
6200
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B1
FRONEK GROUP
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B1200 - For greater axial travel, see: B2100 - For lateral restraint, see: B3100 - For lateral travel, see: B5100
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
280
350
450
650
750
920
1060
1680
2100
2550
3400
4000
4400
5000
5800
6400
6800
7200
9400
11000
12400
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B2
Duty,
MODEL B1200 Sliding Insulated Pipe Support Heavy
Base Mounted
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel, requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B1300 - For greater axial travel, see: B2200 - For lateral restraint, see: B3200 - For lateral travel, see: B5200
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
400
500
650
950
1100
1350
1600
2500
3100
3800
5100
6000
6600
7500
8700
9600
10200
10800
14100
16500
18600
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B3
Duty,
MODEL B1300 Sliding Insulated Pipe Support Heavy
Base Mounted
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel, requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For greater axial travel, see: B2300 - For lateral restraint, see: B3300 - For lateral travel, see: B5300
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
550
700
900
1300
1500
1800
2100
3350
4200
5100
6800
8000
8800
10000
11600
12800
13600
14400
18800
22000
24800
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B4
Duty,
MODEL B2000 Sliding Insulated Pipe Support Heavy
Base Mounted
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel, requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B2100 - For lesser axial travel, see: B1000 - For lateral restraint, see: B4000 - For lateral travel, see: B6000
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
140
175
225
325
375
460
530
840
1050
1275
1700
2000
2200
2500
2900
3200
3400
3600
4700
5500
6200
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B5
Duty,
MODEL B2100 Sliding Insulated Pipe Support Heavy
Base Mounted
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel, requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B2200 - For lesser axial travel, see: B1100 - For lateral restraint, see: B4100 - For lateral travel, see: B6100
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
280
350
450
650
750
920
1060
1680
2100
2550
3400
4000
4400
5000
5800
6400
6800
7200
9400
11000
12400
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B6
Duty,
MODEL B2200 Sliding Insulated Pipe Support Heavy
Base Mounted
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel, requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B2300 - For lesser axial travel, see: B1200 - For lateral restraint, see: B4200 - For lateral travel, see: B6200
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
400
500
650
950
1100
1350
1600
2500
3100
3800
5100
6000
6600
7500
8700
9600
10200
10800
14100
16500
18600
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
Application:
Model B2200 is designed for use on:
Hot Water
Vacuum
Gas
Cold Water
Steam
Air
Dual Temperature Chilled Water
Intended for installation on:
Flat Surfaces
Temperature Range: +40F to +1200F
Note: Up to 1700 F available upon request.
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Material Data:
Features:
All pipe sizes
Easy Installation
Eliminates welding to pipe
Overlapping galvanized sheet metal jacket
Insulating structural inserts for load transfer
Stainless steel to UHMW polyethylene slide
Other I.D.'s and/or O.D.'s available on request
Factory mounted polyethylene slide pad on steel
mounting plate
Performance Test Results on File:
Available upon request.
CATALOG PS-2004
B7
Duty,
MODEL B2300 Sliding Insulated Pipe Support Heavy
Base Mounted
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel, requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For lesser axial travel, see: B1300 - For lateral restraint, see: B4300 - For lateral travel, see: B6300
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
550
700
900
1300
1500
1800
2100
3350
4200
5100
6800
8000
8800
10000
11600
12800
13600
14400
18800
22000
24800
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B8
FRONEK GROUP
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements. If lateral load is greater than 20% of vertical load, contact factory.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B3100 - For greater axial travel, see: B4000 - For lateral travel, see: B5000
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
140
175
225
325
375
460
530
840
1050
1275
1700
2000
2200
2500
2900
3200
3400
3600
4700
5500
6200
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B9
Duty,
MODEL B3100 Guided Insulated Pipe Support Heavy
Base Mounted
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel, requirements. If lateral load is greater than 20% of vertical load, contact factory.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B3200 - For greater axial travel, see: B4100 - For lateral travel, see: B5100
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
280
350
450
650
750
920
1060
1680
2100
2550
3400
4000
4400
5000
5800
6400
6800
7200
9400
11000
12400
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B10
FRONEK GROUP
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements. If lateral load is greater than 20% of vertical load, contact factory.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B3300 - For greater axial travel, see: B4200 - For lateral travel, see: B5200
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
400
500
650
950
1100
1350
1600
2500
3100
3800
5100
6000
6600
7500
8700
9600
10200
10800
14100
16500
18600
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B11
Duty,
MODEL B3300 Guided Insulated Pipe Support Heavy
Base Mounted
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel, requirements. If lateral load is greater than 20% of vertical load, contact factory.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For greater axial travel, see: B4300 - For lateral travel, see: B5300
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
550
700
900
1300
1500
1800
2100
3350
4200
5100
6800
8000
8800
10000
11600
12800
13600
14400
18800
22000
24800
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B12
FRONEK GROUP
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements. If lateral load is greater than 20% of vertical load, contact factory.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B4100 - For lateral travel, see: B6000
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
140
175
225
325
375
460
530
840
1050
1275
1700
2000
2200
2500
2900
3200
3400
3600
4700
5500
6200
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B13
Duty,
MODEL B4100 Guided Insulated Pipe Support Heavy
Base Mounted
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel, requirements. If lateral load is greater than 20% of vertical load, contact factory.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B4200 - For lateral travel, see: B6100
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
280
350
450
650
750
920
1060
1680
2100
2550
3400
4000
4400
5000
5800
6400
6800
7200
9400
11000
12400
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B14
FRONEK GROUP
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements. If lateral load is greater than 20% of vertical load, contact factory.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B4300 - For lateral travel, see: B6200
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
400
500
650
950
1100
1350
1600
2500
3100
3800
5100
6000
6600
7500
8700
9600
10200
10800
14100
16500
18600
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B15
Duty,
MODEL B4300 Guided Insulated Pipe Support Heavy
Base Mounted
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel, requirements. If lateral load is greater than 20% of vertical load, contact factory.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For lateral travel, see: B6300
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
550
700
900
1300
1500
1800
2100
3350
4200
5100
6800
8000
8800
10000
11600
12800
13600
14400
18800
22000
24800
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
Application:
Features:
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Material Data:
CATALOG PS-2004
B16
MODEL B5000
FRONEK GROUP
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B5100 - For greater axial travel, see: B6000 - For lateral restraint, see: B3000 - For lateral travel, see: B1000
Pipe
Size
Vert.
Load
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
140
175
225
325
375
460
530
840
1050
1275
1700
2000
2200
2500
2900
3200
3400
3600
4700
5500
6200
Application:
Features:
Material Data:
CATALOG PS-2004
B17
MODEL B5100
FRONEK GROUP
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B5200 - For greater axial travel, see: B6100 - For lateral restraint, see: B3100 - For lateral travel, see: B1100
Pipe
Size
Vert.
Load
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
280
350
450
650
750
920
1060
1680
2100
2550
3400
4000
4400
5000
5800
6400
6800
7200
9400
11000
12400
Application:
Features:
Material Data:
CATALOG PS-2004
B18
MODEL B5200
FRONEK GROUP
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B5300 - For greater axial travel, see: B6200 - For lateral restraint, see: B3200 - For lateral travel, see: B1200
Pipe
Size
Vert.
Load
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
400
500
650
950
1100
1350
1600
2500
3100
3800
5100
6000
6600
7500
8700
9600
10200
10800
14100
16500
18600
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B19
MODEL B5300
FRONEK GROUP
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For greater axial travel, see: B6300 - For lateral restraint, see: B3300 - For lateral travel, see: B1300
Pipe
Size
Vert.
Load
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
550
700
900
1300
1500
1800
2100
3350
4200
5100
6800
8000
8800
10000
11600
12800
13600
14400
18800
22000
24800
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B20
MODEL B6000
FRONEK GROUP
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B6100 - For lateral restraint, see: B4000 - For minimal lateral travel, see: B2000
Pipe
Size
Vert.
Load
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
140
175
225
325
375
460
530
840
1050
1275
1700
2000
2200
2500
2900
3200
3400
3600
4700
5500
6200
Application:
Features:
Material Data:
CATALOG PS-2004
B21
MODEL B6100
FRONEK GROUP
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B6200 - For lateral restraint, see: B4100 - For minimal lateral travel, see: B2100
Pipe
Size
Vert.
Load
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
280
350
450
650
750
920
1060
1680
2100
2550
3400
4000
4400
5000
5800
6400
6800
7200
9400
11000
12400
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B22
MODEL B6200
FRONEK GROUP
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B6300 - For lateral restraint, see: B4200 - For minimal lateral travel, see: B2200
Pipe
Size
Vert.
Load
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
400
500
650
950
1100
1350
1600
2500
3100
3800
5100
6000
6600
7500
8700
9600
10200
10800
14100
16500
18600
Application:
Features:
Material Data:
CATALOG PS-2004
B23
MODEL B6300
FRONEK GROUP
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For lateral restraint, see: B4300 - For minimal lateral travel, see: B2300
Pipe
Size
Vert.
Load
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
550
700
900
1300
1500
1800
2100
3350
4200
5100
6800
8000
8800
10000
11600
12800
13600
14400
18800
22000
24800
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B24
MODEL B7000
FRONEK GROUP
Laterally Restrained
Insulated Pipe Support
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements. If lateral load is greater than 50% of actual vertical load, contact factory.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B7100 - For greater axial travel, see: B8000 - For lateral travel, see: B5000
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
125
155
200
290
335
410
475
750
940
1140
1500
1800
1950
2250
2600
2850
3050
3200
4200
4900
5550
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B25
Laterally Restrained
Insulated Pipe Support
MODEL B7100
FRONEK GROUP
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements. If lateral load is greater than 50% of actual vertical load,
contact factory.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B7200 - For lateral restraint, see: B8100 - For minimal lateral travel, see: B5100
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
250
310
400
580
670
820
950
1500
1880
2280
3000
3600
3900
4500
5200
5700
6100
6400
8400
9800
11100
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B26
MODEL B7200
FRONEK GROUP
Laterally Restrained
Insulated Pipe Support
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements. If lateral load is greater than 50% of actual vertical load,
contact factory.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B7300 - For greater axial travel, see: B8200 - For lateral travel, see: B5200
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
375
465
600
870
1005
1230
1425
2250
2820
3420
4500
5400
5850
6750
7800
8550
9150
9600
12600
14700
16650
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B27
Laterally Restrained
Insulated Pipe Support
MODEL B7300
FRONEK GROUP
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements. If lateral load is greater than 50% of actual vertical load,
contact factory.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For greater axial travel, see: B8300 - For lateral travel, see: B5300
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
500
620
800
1160
1340
1640
1900
3000
3760
4560
6000
7200
7800
9000
10400
11400
12200
12800
16800
19600
22200
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B28
MODEL B8000
FRONEK GROUP
Laterally Restrained
Insulated Pipe Support
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements. If lateral load is greater than 50% of actual vertical load,
contact factory.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B8100 - For lateral travel, see: B6000
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
125
155
200
290
335
410
475
750
940
1140
1500
1800
1950
2250
2600
2850
3050
3200
4200
4900
5550
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B29
Laterally Restrained
Insulated Pipe Support
MODEL B8100
FRONEK GROUP
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements. If lateral load is greater than 50% of actual vertical load,
contact factory.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B8200 - For lateral travel, see: B6100
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
250
310
400
580
670
820
950
1500
1880
2280
3000
3600
3900
4500
5200
5700
6100
6400
8400
9800
11100
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B30
MODEL B8200
FRONEK GROUP
Laterally Restrained
Insulated Pipe Support
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements. If lateral load is greater than 50% of actual vertical load,
contact factory.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: B8300 - For lateral travel, see: B6200
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
375
465
600
870
1005
1230
1425
2250
2820
3420
4500
5400
5850
6750
7800
8550
9150
9600
12600
14700
16650
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B31
Laterally Restrained
Insulated Pipe Support
MODEL B8300
FRONEK GROUP
Heavy Duty,
Base Mounted
Contact factory for other dimensional, temperature, load, or axial travel, requirements. If lateral load is greater than 50% of actual vertical load,
contact factory.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For lateral travel, see: B6300
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Vert.
Load
500
620
800
1160
1340
1640
1900
3000
3760
4560
6000
7200
7800
9000
10400
11400
12200
12800
16800
19600
22200
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
B
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
B
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Application:
Features:
Material Data:
CATALOG PS-2004
B32
INTRODUCTION
FRONEK GROUP
SECTION C
INTRODUCTION
SECTION C
PIPE ANCHORS
APPLICATION Heavy Industrial and Large HVAC Distribution Systems
TYPES Welded and Insulated
These anchors have been designed to provide dimensional compatibility with the base mounted
supports in Section B.
Models C1000
Welded Tee Anchor for carbon steel pipe sizes 3 to 6. See Product
Data Sheet for model numbers used with other pipe materials.
Models C1100
Models C2000
Models C2100
Friction Anchors for relatively light axial forces and infrequent thermal
cycling. The higher the model number in this series, the higher the load
rating.
Insulated Positive Anchors for heavy axial forces. The higher the model
number in this series, the higher the load rating.
If your requirements are not covered by the Product Data Sheets in this catalog, please contact us at
713-731-0030 or 1-800-787-5914.
Please acquaint yourself with the selection guide at the front of this catalog and the section
index on the page following this introduction, for assistance in determining the most
appropriate support for your application.
CATALOG PS-2004
SECTION C INDEX
FRONEK GROUP
MODEL
PIPE
SIZE
RANGE
INSULATION
FIELD
WELD TO
PIPE
ROTATIONAL
RESTRAINT
AXIAL
LOAD
CAPACITY
C1000
3-6
NO
YES
YES
HEAVIEST
C1100
3-6
NO
YES
NO
HEAVIEST
C2000
8 - 30
NO
YES
YES
HEAVIEST
C2100
8 - 30
NO
YES
NO
HEAVIEST
C3000
C3100
C3200
C3300
1/2 - 42
1/2 - 42
1/2 - 42
1/2 - 42
YES
YES
YES
YES
NO
NO
NO
NO
NO
NO
NO
NO
LIGHTEST
LIGHTER
LIGHT
MED/LIGHT
C4000
C4100
C4200
C4300
1 - 42
1 - 42
1 - 42
1 - 42
YES
YES
YES
YES
YES
YES
YES
YES
NO
NO
NO
NO
LIGHTEST
LIGHTER
LIGHT
MED/LIGHT
TO ORDER, specify:
1. Quantity
2. Pipe Size & Type
3. Insulation Thickness
4. Model Number
EXAMPLE:
(20) 4 x 2
CATALOG PS-2004
20
4 IPS
2
C1000
C1000
FRONEK GROUP
Pipe
Size
3
3.5
4
5
6
A
3
3.5
4
5
6
C
1.75
2.25
2.75
3.5
4.5
D
0.56
0.56
0.56
0.69
0.69
1"
B
4
4
4
4
4
2"
B
4
4
4
4
4
Insulation Thickness
3"
4"
5"
B
B
B
6
6
8
6
6
8
6
6
8
6
6
8
6
6
8
Application:
Features:
Material Data:
Model No.
C1000
C1010
C1020
C1030
6"
B
8
8
8
8
8
7"
B
10
10
10
10
10
CATALOG PS-2004
C1
FRONEK GROUP
Pipe
Size
3
3.5
4
5
6
A
3
3.5
4
5
6
1"
B
4
4
4
4
4
2"
B
4
4
4
4
4
Insulation Thickness
3"
4"
5"
B
B
B
6
6
8
6
6
8
6
6
8
6
6
8
6
6
8
Application:
Features:
Material Data:
Model No.
C1100
C1110
C1120
C1130
6"
B
8
8
8
8
8
7"
B
10
10
10
10
10
CATALOG PS-2004
C2
FRONEK GROUP
Dimensions and ratings are subject to change without notice. Contact factory for curr ent information.
Note: For small bore welded tee anchor, see: C1000, For large bore "no moment" anchor , see: C2100,
For insulated friction anchor, see: C3000,
For insulated positive anchor, see: C4000
Pipe
Size
8
10
12
14
16
18
20
24
30
A
6
6
6
6
6
9
9
9
12
C
4
4
4
4
4
6.5
6.5
6.5
9
D
0.69
0.69
0.81
0.81
0.81
0.94
0.94
0.94
1.06
E
9
9
9
9
9
15
15
15
15
F
12
12
12
12
12
18
18
18
18
G
0.38
0.38
0.38
0.38
0.38
0.5
0.5
0.5
0.5
1"
B
4
4
4
4
4
4
4
4
4
2"
B
4
4
4
4
6
6
6
6
6
Insulation Thickness
3"
4"
5"
B
B
B
6
6
8
6
6
8
6
6
8
6
6
8
6
8
8
6
8
8
6
8
8
6
8
8
6
8
8
Application:
Features:
Material Data:
Model No.
C2000
C2010
C2020
C2030
6"
B
8
8
8
8
10
10
10
10
10
7"
B
10
10
10
10
10
10
10
10
10
CATALOG PS-2004
C3
FRONEK GROUP
Dimensions and ratings are subject to change without notice. Contact factory for current information.
Note: For welded anchor, see: C2000, For small bore welded tee"no moment" anchor, see:
For insulated friction anchor, see: C3000, For insulated positive anchor, see: C4000
Pipe
Size
8
10
12
14
16
18
20
24
30
A
6
6
6
6
6
9
9
9
12
F
12
12
12
12
12
18
18
18
18
G
0.38
0.38
0.38
0.38
0.38
0.5
0.5
0.5
0.5
1"
B
4
4
4
4
4
4
4
4
4
2"
B
4
4
4
4
6
6
6
6
6
Insulation Thickness
3"
4"
5"
B
B
B
6
6
8
6
6
8
6
6
8
6
6
8
6
8
8
6
8
8
6
8
8
6
8
8
6
8
8
Application:
Features:
Material Data:
Model No.
C2100
C2110
C2120
C2130
6"
B
8
8
8
8
10
10
10
10
10
C1100,
7"
B
10
10
10
10
10
10
10
10
10
CATALOG PS-2004
C4
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: C3100, C4000
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Load Rating
Vert.
Axial
Lbs
Lbs
140
28
175
35
225
45
325
65
375
75
460
92
530
106
840
168
1050
210
1275
255
1700
340
2000
400
2200
440
2500
500
2900
580
3200
640
3400
680
3600
720
4700
940
5500
1100
6200
1240
C
1.5
1.5
2
2
2.5
2.5
3
4
4.5
5.5
7.5
9
10.5
11
12.5
14
15.5
18
22.5
26.5
31
E
3.25
3.25
3.875
4.375
5
5.5
6.062
7.25
8.25
9.25
11.625
13.625
16.125
17.125
19.125
21.375
23.375
27.375
33.625
39.625
46.125
C
2
2
2.5
2.5
3
4
4
4.5
5.5
6.5
8
9.5
11
12
13
14.5
16
19
23
27.5
31.5
E
4.375
4.375
4.875
5.5
6.0625
7.125
7.125
8.25
9.25
10.25
12.625
14.875
17.125
18.125
20.125
22.375
24.375
28.375
34.625
41.125
47.125
C
2.5
2.5
3
4
4
4.5
4.5
5.5
6.5
7.5
9
10.5
12
12.5
14
15.5
16.5
19.5
24
28
32.5
E
5.375
5.375
5.937
7
7
8.125
8.125
9.25
10.25
11.375
13.625
15.875
18.125
19.125
21.375
23.375
25.375
29.375
35.625
42.125
48.125
C
4
4
4
4.5
4.5
5.5
5.5
6.5
7.5
8
9.5
11
12.5
13
14.5
16
17.5
20.5
24.5
28.5
33
E
7
7
7
8
8
9.125
9.125
10.25
11.375
12.625
14.875
16.875
19.125
20.125
22.375
24.375
26.375
30.375
36.625
43.125
49.125
C
4.5
4.5
4.5
5.5
5.5
6.5
6.5
7.5
8
9
10.5
12
13
14
15.5
16.5
18
21
25
29.5
33.5
E
8
8
8
9
9.125
10.125
10.125
11.375
12.375
13.625
15.875
18.125
20.125
21.125
23.375
25.375
27.375
31.375
37.625
44.125
50.125
C
6.5
6.5
6.5
7.5
7.5
8
8
9
9.5
10.5
12
13
14.5
15.5
16.5
18
19.5
22.5
26.5
31
35
E
10
10
10
11.25
11.25
12.25
12.375
13.375
14.875
15.875
17.875
20.125
22.125
23.125
25.375
27.375
29.375
33.375
39.625
46.125
52.125
C
8
8
8
9
9
9.5
9.5
10.5
11
12
13
14.5
16
16.5
18
19.5
21
24
28
32.5
36.5
E
12.125
12.125
12.25
13.25
13.25
14.5
14.625
15.625
16.875
17.875
20.125
22.125
24.125
25.125
27.375
29.375
31.375
35.375
41.625
48.125
54.125
Application:
Features:
Material Data:
Temperature Range:
+40 F to +1200 F
Performance Test Results on File:
Available upon request.
CATALOG PS-2004
C5
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: C3200, C4100
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Load Rating
Vert.
Axial
Lbs
Lbs
280
56
350
70
450
90
650
130
750
150
920
184
1060
212
1680
336
2100
420
2550
510
3400
680
4000
800
4400
880
5000
1000
5800
1160
6400
1280
6800
1360
7200
1440
9400
1880
11000
2200
12400
2480
C
1.5
1.5
2
2
2.5
2.5
3
4
4.5
5.5
7.5
9
10.5
11
12.5
14
15.5
18
22.5
26.5
31
E
3.25
3.25
3.875
4.5
5
5.5
6.187
7.25
8.5
9.5
11.625
13.875
16.125
17.125
19.375
21.375
23.375
27.375
33.625
40.125
46.125
C
2
2
2.5
2.5
3
4
4
4.5
5.5
6.5
8
9.5
11
12
13
14.5
16
19
23
27.5
31.5
E
4.375
4.375
5
5.5
6.0625
7.125
7.125
8.25
9.5
10.5
12.625
15.125
17.125
18.125
20.375
22.375
24.375
28.375
34.625
41.125
47.125
C
2.5
2.5
3
4
4
4.5
4.5
5.5
6.5
7.5
9
10.5
12
12.5
14
15.5
16.5
19.5
24
28
32.5
E
5.375
5.375
6.062
7.125
7.125
8.125
8.125
9.25
10.5
11.625
13.625
16.125
18.125
19.125
21.375
23.375
25.375
29.375
35.625
42.125
48.125
C
4
4
4
4.5
4.5
5.5
5.5
6.5
7.5
8
9.5
11
12.5
13
14.5
16
17.5
20.5
24.5
28.5
33
E
7
7
7
8.125
8.125
9.125
9.125
10.25
11.625
12.625
14.875
17.125
19.125
20.125
22.375
24.375
26.375
30.375
36.625
43.125
49.125
C
4.5
4.5
4.5
5.5
5.5
6.5
6.5
7.5
8
9
10.5
12
13
14
15.5
16.5
18
21
25
29.5
33.5
E
8
8
8
9.125
9.125
10.125
10.125
11.375
12.625
13.625
15.875
18.125
20.125
21.125
23.375
25.375
27.375
31.375
37.625
44.125
50.125
C
6.5
6.5
6.5
7.5
7.5
8
8
9
9.5
10.5
12
13
14.5
15.5
16.5
18
19.5
22.5
26.5
31
35
E
10
10
10
11.25
11.25
12.25
12.375
13.375
14.875
15.875
18.125
20.125
22.125
23.125
25.375
27.375
29.375
33.375
39.625
46.125
52.125
C
8
8
8
9
9
9.5
9.5
10.5
11
12
13
14.5
16
16.5
18
19.5
21
24
28
32.5
36.5
E
12.125
12.25
12.25
13.25
13.25
14.5
14.625
15.625
16.875
17.875
20.125
22.125
24.125
25.125
27.375
29.375
31.375
35.375
41.625
48.125
54.125
Application:
Features:
Material Data:
CATALOG PS-2004
C6
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: C3300, C4200
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Load Rating
Vert.
Axial
Lbs
Lbs
400
80
500
100
650
130
950
190
1100
220
1350
270
1600
320
2500
500
3100
620
3800
760
5100
1020
6000
1200
6600
1320
7500
1500
8700
1740
9600
1920
10200
2040
10800
2160
14100
2820
16500
3300
18600
3720
C
1.5
1.5
2
2
2.5
2.5
3
4
4.5
5.5
7.5
9
10.5
11
12.5
14
15.5
18
22.5
26.5
31
E
3.25
3.25
4
4.5
5
5.5
6.187
7.25
8.5
9.5
11.625
13.875
16.125
17.125
19.375
21.375
23.375
27.375
33.625
40.125
46.125
C
2
2
2.5
2.5
3
4
4
4.5
5.5
6.5
8
9.5
11
12
13
14.5
16
19
23
27.5
31.5
E
4.375
4.375
5
5.5
6.1875
7.125
7.125
8.25
9.5
10.5
12.625
15.125
17.125
18.125
20.375
22.375
24.375
28.375
34.625
41.125
47.125
C
2.5
2.5
3
4
4
4.5
4.5
5.5
6.5
7.5
9
10.5
12
12.5
14
15.5
16.5
19.5
24
28
32.5
E
5.375
5.375
6.062
7.125
7.125
8.125
8.125
9.25
10.5
11.625
13.625
16.125
18.125
19.125
21.375
23.375
25.375
29.375
35.625
42.125
48.125
C
4
4
4
4.5
4.5
5.5
5.5
6.5
7.5
8
9.5
11
12.5
13
14.5
16
17.5
20.5
24.5
28.5
33
E
7
7
7.125
8.125
8.125
9.125
9.125
10.25
11.625
12.625
14.875
17.125
19.125
20.125
22.375
24.375
26.375
30.375
36.625
43.125
49.125
C
4.5
4.5
4.5
5.5
5.5
6.5
6.5
7.5
8
9
10.5
12
13
14
15.5
16.5
18
21
25
29.5
33.5
E
8
8
8.125
9.125
9.125
10.125
10.125
11.375
12.625
13.625
15.875
18.125
20.125
21.125
23.375
25.375
27.375
31.375
37.625
44.125
50.125
C
6.5
6.5
6.5
7.5
7.5
8
8
9
9.5
10.5
12
13
14.5
15.5
16.5
18
19.5
22.5
26.5
31
35
E
10
10
10.125
11.25
11.25
12.25
12.375
13.375
14.875
15.875
18.125
20.125
22.125
23.125
25.375
27.375
29.375
33.375
39.625
46.125
52.125
C
8
8
8
9
9
9.5
9.5
10.5
11
12
13
14.5
16
16.5
18
19.5
21
24
28
32.5
36.5
E
12.125
12.25
12.25
13.25
13.25
14.5
14.625
15.625
16.875
17.875
20.125
22.125
24.125
25.125
27.375
29.375
31.375
35.375
41.625
48.125
54.125
Application:
Features:
Material Data:
CATALOG PS-2004
C7
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: C4300
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Load Rating
Vert.
Axial
Lbs
Lbs
550
110
700
140
900
180
1300
260
1500
300
1800
360
2100
420
3350
670
4200
840
5100
1020
6800
1360
8000
1600
8800
1760
10000
2000
11600
2320
12800
2560
13600
2720
14400
2880
18800
3760
22000
4400
24800
4960
C
1.5
1.5
2
2
2.5
2.5
3
4
4.5
5.5
7.5
9
10.5
11
12.5
14
15.5
18
22.5
26.5
31
E
3.375
3.375
4
4.5
5
5.5
6.187
7.25
8.5
9.5
11.625
13.875
16.125
17.125
19.375
21.375
23.375
27.375
33.625
40.125
46.125
Application:
Model C3300 is designed for use on:
Hot Water
Vacuum
Gas
Cold Water
Steam
Air
Dual Temperature Chilled Water
Where thermal cycle are infrequent
Where axial forces are relatively light or in
balance Intended for installation on:
Flat Surfaces
Temperature Range:
+40 F to +1200 F
C
2
2
2.5
2.5
3
4
4
4.5
5.5
6.5
8
9.5
11
12
13
14.5
16
19
23
27.5
31.5
E
4.5
4.5
5
5.5
6.0625
7.125
7.125
8.25
9.5
10.5
12.625
15.125
17.125
18.125
20.375
22.375
24.375
28.375
34.625
41.125
47.125
C
2.5
2.5
3
4
4
4.5
4.5
5.5
6.5
7.5
9
10.5
12
12.5
14
15.5
16.5
19.5
24
28
32.5
E
5.5
5.5
6.062
7.125
7.125
8.125
8.125
9.25
10.5
11.625
13.625
16.125
18.125
19.125
21.375
23.375
25.375
29.375
35.625
42.125
48.125
C
4
4
4
4.5
4.5
5.5
5.5
6.5
7.5
8
9.5
11
12.5
13
14.5
16
17.5
20.5
24.5
28.5
33
E
7.125
7.125
7.125
8.125
8.125
9.125
9.125
10.25
11.625
12.625
14.875
17.125
19.125
20.125
22.375
24.375
26.375
30.375
36.625
43.125
49.125
C
4.5
4.5
4.5
5.5
5.5
6.5
6.5
7.5
8
9
10.5
12
13
14
15.5
16.5
18
21
25
29.5
33.5
E
8.125
8.125
8.125
9.125
9.125
10.125
10.125
11.375
12.625
13.625
15.875
18.125
20.125
21.125
23.375
25.375
27.375
31.375
37.625
44.125
50.125
C
6.5
6.5
6.5
7.5
7.5
8
8
9
9.5
10.5
12
13
14.5
15.5
16.5
18
19.5
22.5
26.5
31
35
E
10.125
10.125
10.125
11.25
11.25
12.375
12.375
13.375
14.875
15.875
18.125
20.125
22.125
23.125
25.375
27.375
29.375
33.375
39.625
46.125
52.125
C
8
8
8
9
9
9.5
9.5
10.5
11
12
13
14.5
16
16.5
18
19.5
21
24
28
32.5
36.5
E
12.25
12.25
12.25
13.25
13.25
14.625
14.625
15.625
16.875
17.875
20.125
22.125
24.125
25.125
27.375
29.375
31.375
35.375
41.625
48.125
54.125
Material Data:
Features:
All pipe sizes
Easy Installation
Eliminates welding to pipe
Overlapping galvanized sheet metal jacket
Insulating structural inserts for load transfer
Other I.D.'s and/or O.D.'s available on request
Bottom-of-pipe to top-of-shield matches insulated
supports in "B" series
Performance Test Results on File:
Available upon request.
CATALOG PS-2004
C8
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: C4100
If thrust plate thickness "D" is greater than pipe wall thickness, consult factory
Pipe
Size
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Load Rating
Vert. Axial
Lbs
Lbs
200
410
290
590
360
730
440
890
530
1400
840
1730
1050 2060
1275 2400
1700 3020
2000 3700
2200 4320
2500 4700
2900 5340
3200 5970
3400 6600
3600 7850
4700 9740
5500 11600
6200 13500
C
2
2
2.5
2.5
3
4
4.5
5.5
7.5
9
10.5
11
12.5
14
15.5
18
22.5
26.5
31
D
0.1875
0.1875
0.1875
0.1875
0.1875
0.1875
0.1875
0.1875
0.1875
0.1875
0.1875
0.1875
0.1875
0.1875
0.1875
0.1875
0.1875
0.1875
0.1875
E
4.125
4.625
5.125
5.625
6.187
7.25
8.25
9.25
11.375
13.625
15.625
16.625
18.625
20.625
22.625
26.625
33.125
39.125
45.125
C
2.5
2.5
3
4
4
4.5
5.5
6.5
8
9.5
11
12
13
14.5
16
19
23
27.5
31.5
D
0.1875
0.1875
0.1875
0.1875
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
E
5.125
5.625
6.1875
7.25
7.25
8.25
9.25
10.25
12.375
14.875
16.875
17.875
19.875
21.875
23.875
27.875
34.125
40.125
46.125
C
3
4
4
4.5
4.5
5.5
6.5
7.5
9
10.5
12
12.5
14
15.5
16.5
19.5
24
28
32.5
D
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
E
6.187
7.25
7.25
8.25
8.25
9.25
10.25
11.375
13.375
15.875
17.875
18.875
20.875
22.875
24.875
28.875
35.125
41.125
47.125
C
4
4.5
4.5
5.5
5.5
6.5
7.5
8
9.5
11
12.5
13
14.5
16
17.5
20.5
24.5
28.5
33
D
0.25
0.25
0.25
0.25
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
E
7.25
8.25
8.25
9.25
9.25
10.25
11.375
12.375
14.625
16.875
18.875
19.875
21.875
23.875
25.875
29.875
36.125
42.125
48.125
C
4.5
5.5
5.5
6.5
6.5
7.5
8
9
10.5
12
13
14
15.5
16.5
18
21
25
29.5
33.5
D
0.25
0.25
0.25
0.25
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
E
8.25
9.25
9.25
10.25
10.25
11.375
12.375
13.375
15.625
17.875
19.875
20.875
22.875
24.875
26.875
30.875
37.125
43.125
49.125
C
D
E
6.5
0.25
10.25
7.5
0.25 11.375
7.5 0.3125 11.375
8 0.3125 12.375
8
0.375 12.375
9
0.375 13.375
9.5 0.375 14.625
10.5 0.375 15.625
12 0.375 17.625
13 0.375 19.875
14.5 0.375 21.875
15.5 0.375 22.875
16.5 0.375 24.875
18 0.375 26.875
19.5 0.375 28.875
22.5 0.375 32.875
26.5 0.375 39.125
31 0.375 45.125
35 0.375 51.125
Application:
Features:
Material Data:
CATALOG PS-2004
C9
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are subject to normal
manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: C4200
If thrust plate thickness "D" is greater than pipe wall thickness, consult factory
Pipe
Size
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Load Rating
Vert. Axial
Lbs
Lbs
400
640
580
930
720
1160
870
1410
1060 2400
1680 2900
2100 3400
2550 3900
3400 4850
4000 5850
4400 6800
5000 7350
5800 8320
6400 9240
6800 10200
7200 12000
9400 14900
11000 17750
12400 20500
C
2.5
2.5
3
4
4
4.5
5.5
6.5
8
9.5
11
12
13
14.5
16
19
23
27.5
31.5
D
0.25
0.25
0.25
0.25
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
E
5.375
5.875
6.4375
7.5
7.5
8.5
9.5
10.5
12.625
15.125
17.125
18.125
20.125
22.125
24.125
28.125
34.375
40.375
46.375
C
3
4
4
4.5
4.5
5.5
6.5
7.5
9
10.5
12
12.5
14
15.5
16.5
19.5
24
28
32.5
D
0.25
0.25
0.25
0.25
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
0.3125
E
6.437
7.5
7.5
8.5
8.5
9.5
10.5
11.625
13.625
16.125
18.125
19.125
21.125
23.125
25.125
29.125
35.375
41.375
47.375
C
D
E
4
0.25
7.5
4.5 0.3125
8.5
4.5 0.3125
8.5
5.5 0.3125
9.5
5.5 0.375
9.5
6.5 0.375
10.5
7.5 0.375 11.625
8
0.375 12.625
9.5 0.375 14.875
11 0.375 17.125
12.5 0.375 19.125
13 0.375 20.125
14.5 0.375 22.125
16 0.375 24.125
17.5 0.375 26.125
20.5 0.375 30.125
24.5 0.375 36.375
28.5 0.375 42.375
33 0.375 48.375
C
D
E
4.5
0.25
8.5
5.5 0.3125
9.5
5.5 0.3125
9.5
6.5 0.3125 10.5
6.5 0.375
10.5
7.5 0.375 11.625
8
0.375 12.625
9
0.375 13.625
10.5 0.375 15.875
12 0.375 18.125
13 0.375 20.125
14 0.375 21.125
15.5 0.375 23.125
16.5 0.375 25.125
18 0.375 27.125
21 0.375 31.125
25 0.375 37.375
29.5 0.375 43.375
33.5 0.375 49.375
C
D
E
6.5 0.3125 10.5
7.5 0.3125 11.625
7.5 0.3125 11.625
8
0.375 12.625
8
0.5
12.625
9
0.5
13.625
9.5
0.5
14.875
10.5
0.5
15.875
12
0.5
17.875
13
0.5
20.125
14.5
0.5
22.125
15.5
0.5
23.125
16.5
0.5
25.125
18
0.5
27.125
19.5
0.5
29.125
22.5
0.5
33.125
26.5
0.5
39.375
31
0.5
45.375
35
0.5
51.375
Application:
Features:
Material Data:
CATALOG PS-2004
C10
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel requirements.
The load ratings represent average values obtained in accordance with accepted test methods and are
subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: For higher load ratings, see: C4300
If thrust plate thickness "D" is greater than pipe wall thickness, consult factory
Pipe
Size
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Load Rating
Vert. Axial
Lbs
Lbs
600
900
870
1290
1090 1620
1310 1960
1600 3450
2500 4100
3100 4750
3800 5400
5100 6675
6000 8000
6600 9300
7500 10000
8700 11300
9600 12500
10200 13800
10800 16300
14100 20100
16500 23900
16500 23900
C
3
4
4
4.5
4.5
5.5
6.5
7.5
9
10.5
12
12.5
14
15.5
16.5
19.5
24
28
32.5
D
0.3125
0.3125
0.3125
0.3125
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
E
6.687
7.75
7.75
8.75
8.75
9.75
10.75
11.875
13.875
16.375
18.375
19.375
21.375
23.375
25.375
29.375
35.625
41.625
47.625
C
D
4 0.3125
4.5 0.3125
4.5 0.3125
5.5 0.375
5.5
0.5
6.5
0.5
7.5
0.5
8
0.5
9.5
0.5
11
0.5
12.5
0.5
13
0.5
14.5
0.5
16
0.5
17.5
0.5
20.5
0.5
24.5
0.5
28.5
0.5
33
0.5
E
7.75
8.75
8.75
9.75
9.75
10.75
11.875
12.875
15.125
17.375
19.375
20.375
22.375
24.375
26.375
30.375
36.625
42.625
48.625
B
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
C
D
E
4.5 0.3125 8.75
5.5 0.375
9.75
5.5 0.375
9.75
6.5 0.375 10.75
6.5
0.5
10.75
7.5
0.5
11.875
8
0.5
12.875
9
0.5
13.875
10.5
0.5
16.125
12
0.5
18.375
13
0.5
20.375
14
0.5
21.375
15.5
0.5
23.375
16.5
0.5
25.375
18
0.5
27.375
21
0.5
31.375
25
0.5
37.625
29.5
0.5
43.625
33.5
0.5
49.625
C
D
6.5 0.3125
7.5 0.375
7.5 0.375
8
0.375
8
0.5
9
0.5
9.5
0.5
10.5
0.5
12
0.5
13
0.5
14.5
0.5
15.5
0.5
16.5
0.5
18
0.5
19.5
0.5
22.5
0.5
26.5
0.5
31
0.5
35
0.5
E
10.75
11.875
11.875
12.875
12.875
13.875
15.125
16.125
18.125
20.375
22.375
23.375
25.375
27.375
29.375
33.375
39.625
45.625
51.625
Application:
Features:
Material Data:
CATALOG PS-2004
C11
FRONEK GROUP
Contact factory for other dimensional, temperature, load, or axial travel requirements.
The load ratings represent average values obtained in accordance with accepted test
methods and are subject to normal manufacturing variations.
Dimensions and ratings are subject to change without notice.
Note: If thrust plate thickness "D" is greater than pipe wall thickness, consult factory
Pipe
Size
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
Load Rating
Vert. Axial
Lbs
Lbs
910
1360
1310 1970
1640 2460
1980 2980
2420 3620
3110 4660
3840 5760
4570 6860
5950 8930
7420 11130
8800 13200
10000 15000
11600 17400
12800 19200
13600 20400
14400 21600
18800 28200
22000 33000
24800 37200
C
4
4.5
4.5
5.5
5.5
6.5
7.5
8
9.5
11
12.5
13
14.5
16
17.5
20.5
24.5
28.5
33
D
0.375
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
E
8
9
9
10
10
11
12.125
13.125
15.375
17.375
19.625
20.625
22.625
24.625
26.625
30.625
37.125
43.125
49.125
C
4.5
5.5
5.5
6.5
6.5
7.5
8
9
10.5
12
13
14
15.5
16.5
18
21
25
29.5
33.5
D
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
E
9
10
10
11
11
12.125
13.125
14.125
16.375
18.375
20.625
21.625
23.625
25.625
27.625
31.625
38.125
44.125
50.125
C
6.5
7.5
7.5
8
8
9
9.5
10.5
12
13
14.5
15.5
16.5
18
19.5
22.5
26.5
31
35
D
0.5
0.5
0.5
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
E
11
12.125
12.125
13.125
13.125
14.125
15.375
16.375
18.375
20.375
22.625
23.625
25.625
27.625
29.625
33.625
40.125
46.125
52.125
Application:
Features:
Material Data:
CATALOG PS-2004
C12
INTRODUCTION
FRONEK GROUP
SECTION D
INTRODUCTION
SECTION D
PRE-INSULATED PIPE SUPPORTS Hanger Type
APPLICATION Heavy Industrial and Large HVAC Distribution Systems
These supports were designed to take advantage of maximum hanger spacings and/or to
accommodate thermal loads or loads due to the presence of valves or other pipe systems
components.
Models D1000 D2000
By modifying our standard pipe support concept with combinations of structural insert materials and strap
design, we can readily and economically respond to virtually any pipe support requirement.
If your requirements are not covered by the Product Data Sheets in this catalog, please contact us at
731-713-0030 or 1-800-787-5914.
Please acquaint yourself with the selection guide at the front of this catalog and the section
index on the page following this introduction, for assistance in determining the most
appropriate support for your application.
CATALOG PS-2004
SECTION D INDEX
FRONEK GROUP
HANGER TYPE
MODEL
PIPE
SIZE
RANGE
D1000
D2000
D3000
D3100
D3200
D3300
1/2 - 4
1/2 - 4
1 - 42
1 - 42
1 - 42
1 - 42
D4000
D5000
D6000
D6100
D6200
D6300
1/2 - 4
1/2 - 4
5 - 30
5 - 30
16 - 30
20 - 30
PRIMARY
APPLICATION
HOT
COLD
2 - BOLT
2 - BOLT
2 - BOLT
2 - BOLT
2 - BOLT
2 - BOLT
X
X
X
X
X
X
X
X
X
MIN OVERHEAD
CLEARANCE
X
X
X
X
X
X
X
X
X
X
TO ORDER, specify:
1. Quantity
2. Pipe Size & Type
3. Insulation Thickness
4. Model Number
EXAMPLE:
SPECIAL
FEATURES
(20) 2 x 3
CATALOG PS-2004
"
"
"
"
"
20
2 IPS
3
D1000
D1000
DUTY
HEAVY
HEAVY
HEAVY
EXTRA-HEAVY
HEAVIER
HEAVIEST
HEAVY
HEAVY
HEAVY
EXTRA-HEAVY
HEAVIER
HEAVIEST
FRONEK GROUP
Oper
Mult
Temp
Factor
o
F
"F"
500
0.90
750
0.75
1000
0.50
1200
0.30
TABLE II
(a)
load
lbs.
65
75
90
150
245
290
365
475
Iron
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
The load ratings represent average values obtained in accordance with accepted test
methods and are subject to normal manufacturing variations. Dimensions and ratings are
subject to change without notice. Contact factory for current inform ation.
To obtain load ratings for operating temperatures of 500 oF and higher, multiply maximum
load rating by factor "F" in Table II.
A
1/8x 1 1/2
1/8x 1 1/2
1/8x 1 1/2
1/8x 1 1/2
1/4x 1 1/2
1/4x 1 1/2
1/4x 1 1/2
1/4x 1 1/2
B
0.38
0.38
0.38
0.38
0.50
0.50
0.63
0.63
C
0.69
0.69
0.69
0.69
0.81
0.81
1.06
1.06
Insul.
Thk 1"
D
E
F
0.56 2.38
4
0.56 2.38
4
0.56 2.69
4
0.56 2.94
4
6
0.63 3.56
0.63 3.81
6
0.63 4.22
6
0.63 4.75
6
TABLE I
Insul.
Thk 2"
E
F
3.44
4
3.44
4
3.72
4
4.25
4
4.63
6
5.13
6
5.25
6
5.75
6
Insul.
Thk 3"
E
F
4.75
6
4.75
6
4.75
6
5.25
6
5.63
6
6.13
9
6.25
9
6.81
9
Insul.
Thk 4"
E
F
5.75
6
5.75
6
5.75
6
6.31
6
6.69
6
7.19
9
7.31
9
7.81
9
Insul.
Thk 5"
E
F
6.81
6
6.81
6
6.81
6
7.31
6
7.69
6
8.31
9
8.44
9
8.94
9
Application:
Features:
Material Data:
Compact
Easy installation
Eliminates welding to pipe
Copper tubing sizes and pipe sizes
Overlapping galvanized sheet metal jacket
Minimizes heat-loss and/or condensation
Other I.D.'s and/or O.D.'s available on request
+40 F to +1200 F
CATALOG PS-2004
D1
FRONEK GROUP
Oper
Mult
Temp
Factor
o
F
"F"
500
0.90
750
0.75
1000
0.50
1200
0.30
TABLE II
Iron
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
(a)
load
lbs.
65
75
90
150
245
290
365
475
The load ratings represent average values obtained in accordance with accepted test
methods and are subject to normal manufacturing variations. Dimensions and ratings are
subject to change without notice. Contact factory for current inform ation.
To obtain load ratings for operating temperatures of 500 oF and higher, multiply maximum
load rating by factor "F" in Table II.
A
1/8x 1 1/2
1/8x 1 1/2
1/8x 1 1/2
1/8x 1 1/2
1/4x 1 1/2
1/4x 1 1/2
1/4x 1 1/2
1/4x 1 1/2
B
0.38
0.38
0.38
0.38
0.50
0.50
0.63
0.63
C
0.69
0.69
0.69
0.69
0.81
0.81
1.06
1.06
Insul.
Thk 1"
D
E
F
0.56 2.38
6
0.56 2.38
6
0.56 2.69
6
0.56 2.94
6
0.63 3.56
6
0.63 3.81
6
0.63 4.22
6
0.63 4.75
6
TABLE I
Insul.
Thk 2"
E
F
3.44
6
3.44
6
3.72
6
4.25
6
4.63
6
5.13
6
5.25
6
5.75
6
Insul.
Thk 3"
E
F
4.75
6
4.75
6
4.75
6
5.25
6
5.63
6
6.13
9
6.25
9
6.81
9
Insul.
Thk 4"
E
F
5.75
6
5.75
6
5.75
6
6.31
6
6.69
6
7.19
9
7.31
9
7.81
9
Insul.
Thk 5"
E
F
6.81
6
6.81
6
6.81
6
7.31
6
7.69
6
8.31
9
8.44
9
8.94
9
Application:
Features:
Material Data:
Compact
Easy installation
Eliminates welding to pipe
Copper tubing sizes and pipe sizes
Overlapping galvanized sheet metal jacket
Minimizes heat-loss and/or condensation
Other I.D.'s and/or O.D.'s available on request
+40 F to +1200 F
Calcium silicate insulation extend 1" beyond the
galvanized sheet metal jacket providing for an
easier wet lag butt joint with the pipe insulation.
Performance Test Results on File:
Available upon request.
CATALOG PS-2004
D2
FRONEK GROUP
The load ratings represent average values obtained in accordance with accepted test methods
and are subject to normal manufacturing variations. Dimensions and ratings are subject to
change without notice. Contact factory for current information.
Note: For higher load ratings, see: D3100
Pipe
Size
(a)
load
lbs.
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
285
320
320
540
540
770
1125
1430
1805
2310
2705
2705
3035
3750
3855
4935
5295
7855
7970
3/16x2
3/16x2
3/16x2
1/4x2
1/4x2
1/4x3
3/8x3
3/8x3
1/2x3
1/2x3
5/8x3
5/8x3
5/8x3
3/4x3
3/4x3
1x3
1x3
1x6
1x6
0.375
0.375
0.375
0.375
0.375
0.5
0.5
0.625
0.625
0.75
0.75
0.75
0.875
0.875
1
1
1.25
1.25
1.25
0.675
0.675
0.675
0.675
0.675
0.84
0.84
1.05
1.05
1.05
1.05
1.05
1.315
1.315
1.315
1.315
1.66
1.66
1.66
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
1
1
1
1
1.25
1.25
1.25
Insul.
Thk 1"
E
F
2.81
6
3.06
6
3.31
6
3.69
6
3.97
6
4.63
6
5.38
6
6
6
7.31
6
8.44
6
9.69
6
10.19
6
11.31
6
12.56
6
13.69
6
16.19
6
19.44
6
22.44
9
25.44
9
TABLE I
Insul.
Thk 2"
E
F
3.84
4.38
4.38
5
5
5.63
6.38
7.06
8.31
9.56
10.69
11.19
12.31
13.56
14.69
17.19
20.44
23.44
26.44
Application:
Features:
Compact
Easy installation
Eliminates welding to pipe
Copper tubing sizes and pipe sizes
Overlapping galvanized sheet metal jacket
Minimizes heat-loss and/or condensation
Other I.D.'s and/or O.D.'s available on request
4.88
5.38
5.38
6
6
6.69
7.44
8.06
9.44
10.56
11.69
12.18
13.31
14.56
15.69
18.19
21.44
24.44
27.44
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
9
9
Insul.
Thk 4"
E
F
5.88
6.44
6.44
7.06
7.06
7.69
8.56
9.18
10.44
11.56
12.69
13.19
14.31
15.56
16.69
19.18
22.44
25.44
28.44
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
9
9
Insul.
Thk 5"
E
F
6.94
7.44
7.44
8.19
8.19
8.81
9.56
10.19
11.44
12.56
13.69
14.19
15.31
16.56
17.69
20.19
23.44
26.44
29.44
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
9
9
Material Data:
Temperature Range:
o
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
9
9
Insul.
Thk 3"
E
F
+40 F to +1200 F
Performance Test Results on File:
Available upon request.
CATALOG PS-2004
D3
FRONEK GROUP
The load ratings represent average values obtained in accordance with accepted test methods
and are subject to normal manufacturing variations. Dimensions and ratings are subject to
change without notice. Contact factory for current information.
Note: For higher load ratings, see: D3200
Pipe
Size
(a)
load
lbs.
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
510
605
605
810
1125
1720
2340
2705
3605
3630
4660
4660
6820
6820
7970
10285
10600
13020
13020
3/16x3
1/4x3
1/4x3
1/4x3
3/8x3
3/8x3
1/2x3
1/2x3
5/8x3
5/8x3
3/4x3
3/4x3
3/4x5
3/4x5
1x6
1x6
1x6
1 1/4x6
1 1/4x6
0.375
0.375
0.375
0.5
0.5
0.625
0.75
0.75
0.875
0.875
1
1
1.25
1.25
1.25
1.5
1.5
2
2
0.675
0.675
0.675
0.84
0.84
1.05
1.05
1.05
1.315
1.315
1.315
1.315
1.66
1.66
1.66
1.9
1.9
2.375
2.375
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
1
1
1
1
1.25
1.25
1.25
1.25
1.25
1.75
1.75
Insul.
Thk 1"
E
F
2.81
6
3.19
6
3.44
6
3.81
6
4.34
6
5
6
5.88
6
6.38
6
7.69
6
8.69
6
10.19
6
10.69
6
11.94
9
12.94
9
14.44
9
16.69
9
19.69
9
23.69
9
26.69
9
TABLE I
Insul.
Thk 2"
E
F
3.84
4.5
4.5
5.13
5.38
6
6.88
7.44
8.69
9.81
11.19
11.69
12.94
13.94
15.44
17.69
20.69
24.69
27.69
6
6
6
6
6
6
6
6
6
6
6
6
9
9
9
9
9
9
9
Insul.
Thk 3"
E
F
4.88
5.5
5.5
6.13
6.38
7.06
7.94
8.44
9.81
10.81
12.19
12.69
13.94
14.94
16.44
18.69
21.69
25.69
28.69
6
6
6
6
6
6
6
6
6
6
6
6
9
9
9
9
9
9
9
Insul.
Thk 4"
E
F
5.88
6.56
6.56
7.19
7.44
8.06
9.06
9.56
10.81
11.81
13.19
13.69
14.94
15.94
17.44
19.69
22.69
26.69
29.69
6
6
6
6
6
6
6
6
6
6
6
6
9
9
9
9
9
9
9
Insul.
Thk 5"
E
F
6.94
7.56
7.56
8.31
8.56
9.19
10.06
10.56
11.81
12.81
14.19
14.69
15.94
16.94
18.44
20.69
23.69
27.69
30.69
6
6
6
6
6
6
6
6
6
6
6
6
9
9
9
9
9
9
9
Application:
Features:
Material Data:
Compact
Easy installation
Eliminates welding to pipe
Copper tubing sizes and pipe sizes
Overlapping galvanized sheet metal jacket
Minimizes heat-loss and/or condensation
Other I.D.'s and/or O.D.'s available on request
+40 F to +1200 F
Performance Test Results on File:
Available upon request.
CATALOG PS-2004
D4
FRONEK GROUP
The load ratings represent average values obtained in accordance with accepted test methods
and are subject to normal manufacturing variations. Dimensions and ratings are subject to
change without notice. Contact factory for current information.
Note: For higher load ratings, see: D3300
Pipe
Size
(a)
load
lbs.
1
1 1/2
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
850
1215
1215
1215
1805
2585
2705
3750
4215
6045
7770
7770
7970
11270
11465
12220
16480
17370
17370
1/4x4 1/2
1/4x4 1/2
1/4x4 1/2
1/4x4 1/2
3/8x4 1/2
3/8x4 1/2
1/2x4 1/2
1/2x4 1/2
1/2x5
5/8x5
3/4x5
3/4x5
1x5
1x5
1x6
1x6
1 1/4x6
1 1/4x8
1 1/4x8
0.625
0.625
0.625
0.625
0.625
0.75
0.75
0.875
1
1.25
1.25
1.25
1.25
1.5
1.5
2
2
2
2
1.05
1.05
1.05
1.05
1.05
1.05
1.05
1.315
1.315
1.66
1.66
1.66
1.66
1.9
1.9
2.375
2.375
2.375
2.375
0.75
0.75
0.75
0.75
0.75
0.75
0.75
1
1
1.25
1.25
1.25
1.25
1.25
1.25
1.75
1.75
1.75
1.75
Insul.
Thk 1"
E
F
3.19
9
3.44
9
3.69
9
3.94
9
4.47
9
5.13
9
5.88
9
6.5
9
7.81
9
9.06
9
10.44
9
10.94
9
12.44
9
13.69
9
14.69
9
17.06
9
20.69
9
23.69
12
26.69
12
TABLE I
Insul.
Thk 2"
E
F
4.22
4.75
4.75
5.25
5.5
6.13
6.88
7.56
8.81
10.19
11.44
11.94
13.44
14.69
15.69
18.06
21.69
24.69
27.69
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
12
12
Insul.
Thk 3"
E
F
5.25
5.75
5.75
6.25
6.5
7.19
7.94
8.56
9.94
11.19
12.44
12.94
14.44
15.69
16.69
19.06
22.69
25.69
28.69
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
12
12
Insul.
Thk 4"
E
F
6.25
6.81
6.81
7.31
7.56
8.19
9.06
9.69
10.94
12.19
13.44
13.94
15.44
16.69
17.69
20.06
23.69
26.69
29.69
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
12
12
Insul.
Thk 5"
E
F
7.31
7.81
7.81
8.44
8.69
9.31
10.06
10.69
11.94
13.19
14.44
14.94
16.44
17.69
18.69
21.06
24.69
27.69
30.69
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
12
12
Application:
Features:
Material Data:
Compact
Easy installation
Eliminates welding to pipe
Copper tubing sizes and pipe sizes
Overlapping galvanized sheet metal jacket
Minimizes heat-loss and/or condensation
Other I.D.'s and/or O.D.'s available on request
+40 F to +1200 F
CATALOG PS-2004
D5
FRONEK GROUP
The load ratings represent average values obtained in accordance with accepted test methods
and are subject to normal manufacturing variations. Dimensions and ratings are subject to
change without notice. Contact factory for current information.
Pipe
Size
(a)
load
lbs.
1
1.5
2
2.5
3
4
5
6
8
10
12
14
16
18
20
24
30
36
42
1135
1630
1715
1805
2705
3445
3750
4935
7215
7257
9320
9320
11465
14445
16580
19005
20605
24905
24905
1/4x6
1/4x6
1/4x6
3/8x6
3/8x6
3/8x6
1/2x6
1/2x6
5/8x6
5/8x6
3/4x6
3/4x6
1x6
1x6
1 1/4x6
1 1/4x6
1 1/4x8
1 1/2x8
1 1/2x8
0.625
0.625
0.625
0.625
0.75
0.875
0.875
1
1.25
1.25
1.5
1.5
1.5
2
2
2
2
2.5
2.5
1.05
1.05
1.05
1.05
1.05
1.315
1.315
1.315
1.66
1.66
1.9
1.9
1.9
2.375
2.375
2.375
2.375
3.508
3.508
0.75
0.75
0.75
0.75
0.75
1
1
1
1.25
1.25
1.25
1.25
1.25
1.75
1.75
1.75
1.75
1.75
1.75
Insul.
Thk 1"
E
F
3.188
9
3.44
9
3.69
9
4.19
9
4.59
9
5.25
9
6
9
6.75
9
8.06
9
9.06
9
10.69
9
11.19
9
12.69
9
14.06
9
15.69
9
17.69
9
20.69
12
24.44
12
27.44
12
TABLE I
Insul.
Thk 2"
E
F
4.22
4.75
4.75
5.5
5.63
6.25
7
7.81
9.06
10.19
11.69
12.19
13.69
15.06
16.69
18.69
21.69
25.44
28.44
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
12
12
12
Insul.
Thk 3"
E
F
5.25
5.75
5.75
6.5
6.63
7.31
8.06
8.81
10.19
11.19
12.69
13.19
14.69
16.06
17.69
19.69
22.69
26.44
29.44
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
12
12
12
Insul.
Thk 4"
E
F
6.25
6.81
6.81
7.56
7.69
8.31
9.19
9.94
11.19
12.19
13.69
14.19
15.69
17.06
18.69
20.69
23.69
27.44
30.44
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
12
12
12
Insul.
Thk 5"
E
F
7.31
7.81
7.81
8.69
8.81
9.44
10.19
10.94
12.19
13.19
14.69
15.19
16.69
18.06
19.69
21.69
24.69
28.44
31.44
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
12
12
12
Application:
Features:
Material Data:
Compact
Easy installation
Eliminates welding to pipe
Copper tubing sizes and pipe sizes
Overlapping galvanized sheet metal jacket
Minimizes heat-loss and/or condensation
Other I.D.'s and/or O.D.'s available on request
+40 F to +1200 F
CATALOG PS-2004
D6
FRONEK GROUP
Oper
Mult
Temp
Factor
o
F
"F"
500
0.90
750
0.75
1000
0.50
1200
0.30
TABLE II
(a)
(a)
load
lbs.
65
75
90
130
245
290
365
475
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
A
1/8x1 1/2
1/8x1 1/2
1/8x1 1/2
1/8x1 1/2
1/4x1 1/2
1/4x1 1/2
1/4x1 1/2
1/4x1 1/2
The load ratings represent average values obtained in accordance with accepted test methods and are
subject to normal manufacturing variations. Dimensions and ratings are subject to change without notice.
Contact factory for current information.
B
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
C
1.63
1.63
1.94
2.19
2.44
2.69
2.97
3.5
Insul.
Thk 1"
D
4.75
4.75
5.375
5.875
6.875
7.375
7.937
9
E
6
6
6
6
6
6
6
6
C
2.69
2.69
2.97
3.50
3.50
4.0
4.0
4.5
TABLE I
Insul.
Thk 2"
D
6.875
6.875
7.437
8.5
9
10
10
11
E
6
6
6
6
6
6
6
6
C
4.0
4.0
4.0
4.5
4.5
5.0
5.0
5.56
Insul.
Thk 3"
D
9.5
9.5
9.5
10.5
11
12
12
13.125
E
6
6
6
6
6
9
9
9
C
5.0
5.0
5.0
5.56
5.56
6.06
6.06
6.56
Insul.
Thk 4"
D
11.5
11.5
11.5
12.625
13.125
14.125
14.125
15.125
E
6
6
6
6
6
9
9
9
Application:
Features:
Material Data:
Compact
Easy installation
Eliminates welding to pipe
Copper tubing sizes and pipe sizes
Overlapping galvanized sheet metal jacket
Minimizes heat-loss and/or condensation
Other I.D.'s and/or O.D.'s available on request
+40 F to +1200 F
CATALOG PS-2004
D7
FRONEK GROUP
Oper
Mult
Temp
Factor
o
F
"F"
500
0.90
750
0.75
1000
0.50
1200
0.30
TABLE II
(a)
(a)
load
lbs.
65
75
90
130
245
290
365
475
Pipe
Size
1/2
3/4
1
1 1/2
2
2 1/2
3
4
A
1/8x1 1/2
1/8x1 1/2
1/8x1 1/2
1/8x1 1/2
1/4x1 1/2
1/4x1 1/2
1/4x1 1/2
1/4x1 1/2
The load ratings represent average values obtained in accordance with accepted test methods and are
subject to normal manufacturing variations. Dimensions and ratings are subject to change without notice.
Contact factory for current information.
B
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
C
1.63
1.63
1.94
2.19
2.44
2.69
2.97
3.5
Insul.
Thk 1"
D
4.75
4.75
5.375
5.875
6.875
7.375
7.937
9
E
6
6
6
6
6
6
6
6
C
2.69
2.69
2.97
3.50
3.50
4.0
4.0
4.5
TABLE I
Insul.
Thk 2"
D
6.875
6.875
7.437
8.5
9
10
10
11
E
6
6
6
6
6
6
6
6
C
4.0
4.0
4.0
4.5
4.5
5.0
5.0
5.56
Insul.
Thk 3"
D
9.5
9.5
9.5
10.5
11
12
12
13.125
E
6
6
6
6
6
9
9
9
C
5.0
5.0
5.0
5.56
5.56
6.06
6.06
6.56
Insul.
Thk 4"
D
11.5
11.5
11.5
12.625
13.125
14.125
14.125
15.125
E
6
6
6
6
6
9
9
9
Application:
Features:
Material Data:
Compact
Easy installation
Eliminates welding to pipe
Copper tubing sizes and pipe sizes
Overlapping galvanized sheet metal jacket
Minimizes heat-loss and/or condensation
Minimal overhead clearance requirement
Other I.D.'s and/or O.D.'s available on request
Cold Water
Chilled Water
Intended to be hung from two threaded rods
in close overhead clearance conditions.
Temperature Range:
o
+40 F to +1200 F
Performance Test Results on File:
Available upon request.
CATALOG PS-2004
D8
FRONEK GROUP
The load ratings represent average values obtained in accordance with accepted test
methods and are subject to normal manuf acturing variations. Dimensions and ratings are
subject to change without notice. Contact factory for current information.
Note: For higher load ratings, see: D6100
Pipe
Size
5
6
8
10
12
14
16
18
20
24
30
load
lbs.
600
800
1300
2000
2400
2500
3300
3500
3600
4500
4800
A
1/2x3
1/2x3
1/2x3
1/2x3
5/8x3
5/8x3
3/4x3
3/4x3
3/4x3
1x3
1x3
B
0.375
0.375
0.500
0.500
0.625
0.625
0.750
0.750
0.750
0.750
0.750
C
4.13
4.63
5.68
6.69
7.81
8.31
9.31
10.31
11.31
13.31
16.31
Insul.
Thk 1"
D
11
12
14.375
16.375
19.375
20.375
22.875
24.875
26.875
31.625
37.625
E
6
6
6
6
6
6
6
9
9
9
12
C
5.13
5.68
6.68
7.81
8.81
9.31
10.31
11.31
12.31
14.31
17.31
TABLE I
Insul.
Thk 2"
D
13
14.125
16.375
18.625
21.375
22.375
24.875
26.875
28.875
33.625
39.625
Application:
Features:
Compact
Easy installation
Eliminates welding to pipe
Copper tubing sizes and pipe sizes
Overlapping galvanized sheet metal jacket
Minimizes heat-loss and/or condensation
Minimal overhead clearance requirement
Other I.D.'s and/or O.D.'s available on request
C
6.18
6.68
7.81
8.81
9.81
10.31
11.31
12.31
13.31
15.31
18.31
E
6
6
6
6
6
9
9
9
9
12
12
C
7.31
7.81
8.81
9.81
10.81
11.31
12.31
13.31
14.31
16.31
19.31
Insul.
Thk 4"
D
17.375
18.375
20.625
22.625
25.375
26.375
28.875
30.875
32.875
37.625
43.625
E
6
6
6
9
9
9
9
12
12
12
12
Material Data:
Temperature Range:
o
E
6
6
6
6
6
6
9
9
9
12
12
Insul.
Thk 3"
D
15.125
16.125
18.625
20.625
23.375
24.375
26.875
28.875
30.875
35.625
41.625
+40 F to +1200 F
Performance Test Results on File:
CATALOG PS-2004
D9
FRONEK GROUP
The load ratings represent average values obtained in accordance with accepted test
methods and are subject to normal manuf acturing variations. Dimensions and ratings are
subject to change without notice. Contact factory for current information.
Note: For higher load ratings, see: D6300
load
lbs.
1200
1600
2600
4000
4800
5000
6150
6150
6150
8550
8550
Pipe
Size
5
6
8
10
12
14
16
18
20
24
30
A
1/2x3
1/2x3
1/2x3
5/8x3
3/4x3
3/4x3
1x3
1x4 1/2
1x4 1/2
1x4 1/2
1x4 1/2
B
0.50
0.50
0.63
0.75
0.75
0.75
0.88
0.88
0.88
1.00
1.25
C
4.13
4.63
5.68
6.69
7.81
8.31
9.31
10.31
11.31
13.31
16.31
Insul.
Thk 1"
D
11.25
12.25
14.625
17.125
19.875
20.875
24.125
26.125
28.125
32.375
38.875
E
6
6
6
6
6
6
6
9
9
9
12
C
5.13
5.68
6.68
7.81
8.81
9.31
10.31
11.31
12.31
14.31
17.31
TABLE I
Insul.
Thk 2"
D
13.25
14.375
16.625
19.375
21.875
22.875
26.125
28.125
30.125
34.375
40.875
E
6
6
6
6
6
6
9
9
9
12
12
C
6.18
6.68
7.81
8.81
9.81
10.31
11.31
12.31
13.31
15.31
18.31
Insul.
Thk 3"
D
15.375
16.375
18.875
21.375
23.875
24.875
28.125
30.125
32.125
36.375
42.875
E
6
6
6
6
6
9
9
9
9
12
12
C
7.31
7.81
8.81
9.81
10.81
11.31
12.31
13.31
14.31
16.31
19.31
Insul.
Thk 4"
D
17.625
18.625
20.875
23.375
25.875
26.875
30.125
32.125
34.125
38.375
44.875
E
6
6
6
9
9
9
9
9
12
12
12
Application:
Features:
Material Data:
Compact
Easy installation
Eliminates welding to pipe
Copper tubing sizes and pipe sizes
Overlapping galvanized sheet metal jacket
Minimizes heat-loss and/or condensation
Minimal overhead clearance requirement
Other I.D.'s and/or O.D.'s available on request
+40 F to +1200 F
Performance Test Results on File:
Available upon request.
CATALOG PS-2004
D10
FRONEK GROUP
The load ratings represent average values obtained in accordance with accepted test
methods and are subject to normal manuf acturing variations. Dimensions and ratings are
subject to change without notice. Contact factory for current information.
Note: For higher load ratings, see: D6300
Pipe
Size
16
18
20
24
30
load
lbs.
6600
7000
7200
9000
9600
A
1x4 1/2
1x4 1/2
1x4 1/2
1x4 1/2
1x4 1/2
B
1.25
1.25
1.25
1.25
1.25
C
9.31
10.31
11.31
13.31
16.31
Insul.
Thk 1"
D
24.875
26.875
28.875
32.875
38.875
E
6
9
9
9
12
C
10.31
11.31
12.31
14.31
17.31
TABLE I
Insul.
Thk 2"
D
26.875
28.875
30.875
34.875
40.875
E
9
9
9
12
12
C
11.31
12.31
13.31
15.31
18.31
Insul.
Thk 3"
D
28.875
30.875
32.875
36.875
42.875
E
9
9
9
12
12
C
12.31
13.31
14.31
16.31
19.31
Insul.
Thk 4"
D
30.875
32.875
34.875
38.875
44.875
E
9
9
12
12
12
Application:
Features:
Material Data:
Compact
Easy installation
Eliminates welding to pipe
Copper tubing sizes and pipe sizes
Overlapping galvanized sheet metal jacket
Minimizes heat-loss and/or condensation
Minimal overhead clearance requirement
Other I.D.'s and/or O.D.'s available on request
+40 F to +1200 F
CATALOG PS-2004
D11
FRONEK GROUP
The load ratings represent average values obtained in accordance with accepted test
methods and are subject to normal manuf acturing variations. Dimensions and ratings are
subject to change without notice. Contact factory for current information.
Pipe
Size
20
24
30
load
lbs.
8200
11400
11400
Bolt
Torq
ft-lbs
50
50
50
A
1x6
1x6
1x6
B
1.25
1.50
1.50
C
11.31
13.31
16.31
Insul.
Thk 1"
D
28.875
33.375
39.375
E
9
9
12
C
12.31
14.31
17.31
TABLE I
Insul.
Thk 2"
D
30.875
35.375
41.375
E
9
12
12
C
13.31
15.31
18.31
Insul.
Thk 3"
D
32.875
37.375
43.375
E
9
12
12
C
14.31
16.31
19.31
Insul.
Thk 4"
D
34.875
39.375
45.375
E
12
12
12
Application:
Features:
Material Data:
Compact
Easy installation
Eliminates welding to pipe
Copper tubing sizes and pipe sizes
Overlapping galvanized sheet metal jacket
Minimizes heat-loss and/or condensation
Minimal overhead clearance requirement
Other I.D.'s and/or O.D.'s available on request
+40 F to +1200 F
Performance Test Results on File:
Available upon request.
CATALOG PS-2004
D12
INTRODUCTION
FRONEK GROUP
SECTION E
INTRODUCTION
SECTION E
INSULATED PIPE RISER CLAMPS
APPLICATION Commercial, Light and Heavy Industrial and Large HVAC Distribution
Systems
Models E1000 E1300
Pipe Shields Inc. can also supply similar clamps (not catalogued) for the support of pipe insulation.
Insulated clamps (not catalogued) can be supplied for use as pipe guides on vertical risers.
If your requirements are not covered by the Product Data Sheets in this catalog, please contact us at
713-731-0030 or 1-800-787-5914.
Please acquaint yourself with the selection guide at the front of this catalog and the section
index on the page following this introduction, for assistance in determining the most
appropriate support for your application.
CATALOG PS-2004
SECTION E INDEX
FRONEK GROUP
MODEL
PIPE
SIZE
RANGE
E1000
E1100
E1200
E1300
E2000
E2100
E2200
E2300
2 - 24
2 - 24
2 - 24
12 - 24
2 - 24
2 - 24
2 - 24
12 - 24
PRIMARY
APPLICATION
DOWNWARD
UPWARD
X
X
X
X
X
X
X
X
TO ORDER, specify:
1. Quantity
2. Pipe Size & Type
3. Insulation Thickness
4. Model Number
EXAMPLE:
(20) 4 x 2
CATALOG PS-2004
X
X
X
X
20
4 IPS
2
E1000
E1000
DUTY
MEDIUM
HEAVY
HEAVIER
HEAVIEST
MEDIUM
HEAVY
HEAVIER
HEAVIEST
FRONEK GROUP
Pipe
Size
Load
lbs
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
250
300
400
600
800
1000
1300
1600
1700
2000
2300
2500
2700
2800
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.88
0.88
0.88
0.88
0.88
B
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.38
0.38
0.38
0.38
0.38
0.38
0.38
C
0.25 x 3.00
0.25 x 3.00
0.25 x 3.00
0.25 x 3.00
0.25 x 3.00
0.25 x 4.00
0.25 x 4.00
0.38 x 5.00
0.38 x 5.00
0.38 x 5.00
0.38 x 5.00
0.38 x 5.00
0.38 x 5.00
0.38 x 5.00
Application:
Model E1000 through E1030 is designed for
use on:
Hot Water
Vacuum
Gas
Cold Water
Steam
Air
Dual Temperature Chilled Water
Intended for installation on:
Vertical runs of insulated pipe with
downward load only.
Other:
For handling both upward and downward
loads, see E2000
Temperature Range:
+40oF to +650oF
D
1.50
1.50
1.50
1.50
1.50
2.00
2.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
E
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
5.69
5.94
6.22
6.75
7.25
7.75
8.81
10.31
11.44
11.94
12.94
13.94
14.94
17.19
5.13
5.63
6.19
7.25
8.25
9.25
11.38
13.63
15.88
16.88
18.88
20.88
22.88
26.88
6.75
7.25
7.25
7.75
8.25
8.81
9.81
11.44
12.44
12.94
13.94
14.94
15.94
18.19
7.25
8.25
8.25
9.25
10.25
11.38
13.38
15.88
17.88
18.88
20.88
22.88
24.88
28.88
7.75
8.25
8.25
8.81
9.31
9.81
10.94
12.44
13.44
13.94
14.94
15.94
16.94
19.19
9.25
10.25
10.25
11.38
12.38
13.38
15.63
17.88
19.88
20.88
22.88
24.88
26.88
30.88
8.81
9.31
9.31
9.81
10.44
10.94
11.94
13.44
14.44
14.94
15.94
16.94
17.94
20.19
11.38
12.38
12.38
13.38
14.63
15.63
17.63
19.88
21.88
22.88
24.88
26.88
28.88
32.88
Material Data:
Features:
All pipe sizes
Easy Installation
Positive stop - axially downward
May be supported from below or above
Overlapping galvanized sheet metal jacket
Insulating structural inserts for load transfer
Other I.D.'s and/or O.D.'s Available on Request
Eliminates condensation sweating on chilled
water risers
CATALOG PS-2004
E1
FRONEK GROUP
Pipe
Size
Load
lbs
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
500
600
800
1200
1600
2000
2600
3200
3400
4000
4600
5000
5400
5600
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.88
0.88
0.88
0.88
0.88
0.88
0.88
B
0.38
0.38
0.38
0.38
0.38
0.38
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
C
0.38 x 3.00
0.38 x 3.00
0.38 x 3.00
0.38 x 3.00
0.38 x 4.00
0.38 x 4.00
0.50 x 4.00
0.50 x 5.00
0.50 x 5.00
0.50 x 5.00
0.50 x 6.00
0.50 x 6.00
0.50 x 6.00
0.50 x 6.00
Application:
Model E1100 through E1130 is designed for
use on:
Hot Water
Vacuum
Gas
Cold Water
Steam
Air
Dual Temperature Chilled Water
Intended for installation on:
Vertical runs of insulated pipe.
Other:
For handling both upward and downward
loads, see E2100
Temperature Range:
+40oF to +650oF
D
1.50
1.50
1.50
1.50
2.00
2.00
2.00
3.00
3.00
3.00
4.00
4.00
4.00
4.00
E
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.75
0.75
0.75
0.75
0.75
6.19
6.44
6.72
7.25
7.75
8.25
9.81
10.81
11.94
12.69
13.69
14.69
15.69
17.69
5.38
5.88
6.44
7.50
8.50
9.50
11.88
13.88
16.13
17.13
19.13
21.13
23.13
27.13
7.25
7.75
7.75
8.25
8.75
9.31
10.81
11.94
12.94
13.69
14.69
15.69
16.69
18.69
7.50
8.50
8.50
9.50
10.50
11.63
13.88
16.13
18.13
19.13
21.13
23.13
25.13
29.13
8.25
8.75
8.75
9.31
9.81
10.31
11.94
12.94
13.94
14.69
15.69
16.69
17.69
19.69
9.50
10.50
10.50
11.63
12.63
13.63
16.13
18.13
20.13
21.13
23.13
25.13
27.13
31.13
9.31
9.81
9.81
10.31
10.94
11.44
12.94
13.94
14.94
15.69
16.69
17.69
18.69
20.69
11.63
12.63
12.63
13.63
14.88
15.88
18.13
20.13
22.13
23.13
25.13
27.13
29.13
33.13
Material Data:
Features:
All pipe sizes
Easy Installation
Positive stop - axially downward
May be supported from below or above
Overlapping galvanized sheet metal jacket
Insulating structural inserts for load transfer
Other I.D.'s and/or O.D.'s available on request
Eliminates condensation sweating on chilled water
risers
CATALOG PS-2004
E2
FRONEK GROUP
Pipe
Size
Load
lbs
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
750
900
1200
1800
2400
3000
3900
4800
5100
6000
6900
7500
8100
8400
0.63
0.63
0.63
0.63
0.63
0.88
0.88
0.88
1.13
1.13
1.13
1.13
1.13
1.13
B
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
C
0.50 x 3.00
0.50 x 3.00
0.50 x 3.00
0.50 x 4.00
0.50 x 4.00
0.50 x 5.00
0.50 x 5.00
0.50 x 6.00
0.50 x 6.00
0.50 x 6.00
0.50 x 7.00
0.50 x 7.00
0.50 x 7.00
0.50 x 7.00
Application:
Model E1200 through E1230 is designed for
use on:
Hot Water
Vacuum
Gas
Cold Water
Steam
Air
Dual Temperature Chilled Water
Intended for installation on:
Vertical runs of insulated pipe with
downward load only.
Other:
For handling both upward and downward
loads, see E2200
Temperature Range:
+40oF to +650oF
D
1.50
1.50
1.50
2.00
2.00
3.00
3.00
4.00
4.00
4.00
5.00
5.00
5.00
5.00
E
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.75
0.75
0.75
0.88
0.88
0.88
0.88
6.19
6.44
6.72
7.25
7.75
8.25
9.31
10.69
11.81
12.31
13.44
14.44
15.44
17.69
5.63
6.13
6.69
7.75
8.75
9.75
11.88
13.88
16.13
17.13
19.13
21.13
23.13
27.13
7.25
7.75
7.75
8.25
8.75
9.31
10.31
11.81
12.81
13.31
14.44
15.44
16.44
18.69
Features:
7.75
8.75
8.75
9.75
10.75
11.88
13.88
16.13
18.13
19.13
21.13
23.13
25.13
29.13
8.25
8.75
8.75
9.31
9.81
10.31
11.44
12.81
13.81
14.31
15.44
16.44
17.44
19.69
9.75
10.75
10.75
11.88
12.88
13.88
16.13
18.13
20.13
21.13
23.13
25.13
27.13
31.13
9.31
9.81
9.81
10.31
10.94
11.44
12.44
13.81
14.81
15.31
16.44
17.44
18.44
20.69
11.88
12.88
12.88
13.88
15.13
16.13
18.13
20.13
22.13
23.13
25.13
27.13
29.13
33.13
Material Data:
CATALOG PS-2004
E3
FRONEK GROUP
Pipe
Size
Load
lbs
12
14
16
18
20
24
6800
8000
9200
10000
10800
11200
1.13
1.13
1.13
1.13
1.13
1.13
B
0.50
0.50
0.63
0.63
0.63
0.63
C
0.50 x 7.00
0.50 x 7.00
0.63 x 7.00
0.63 x 7.00
0.63 x 7.00
0.63 x 7.00
Application:
Model E1300 through E1330 is designed for
use on:
Hot Water
Vacuum
Gas
Cold Water
Steam
Air
Dual Temperature Chilled Water
Intended for installation on:
Vertical runs of insulated pipe with
downward load only.
Other:
For handling both upward and downward
loads, see E2300
Temperature Range:
+40oF to +650oF
13.94
14.44
15.69
16.69
17.69
20.19
20.13
21.13
23.38
25.38
27.38
31.38
14.94
15.44
16.69
17.69
18.69
21.19
22.13
23.13
25.38
27.38
29.38
33.38
Material Data:
Features:
All pipe sizes
Easy Installation
Positive stop - axially downward
May be supported from below or above
Overlapping galvanized sheet metal jacket
Insulating structural inserts for load transfer
Other I.D.'s and/or O.D.'s Available on Request
Eliminates condensation sweating on chilled water
risers
CATALOG PS-2004
E4
FRONEK GROUP
Pipe
Size
Load
lbs
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
250
300
400
600
800
1000
1300
1600
1700
2000
2300
2500
2700
2800
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.88
0.88
0.88
0.88
0.88
B
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.38
0.38
0.38
0.38
0.38
0.38
0.38
C
0.25 x 3.00
0.25 x 3.00
0.25 x 3.00
0.25 x 3.00
0.25 x 3.00
0.25 x 4.00
0.25 x 4.00
0.38 x 5.00
0.38 x 5.00
0.38 x 5.00
0.38 x 5.00
0.38 x 5.00
0.38 x 5.00
0.38 x 5.00
Application:
Model E2000 through E2030 is designed for
use on:
Hot Water
Vacuum
Gas
Cold Water
Steam
Air
Dual Temperature Chilled Water
Intended for installation on:
Vertical runs of insulated pipe with upward
and/or downward load.
Other:
For handling downward loads only, see
E1000
Temperature Range:
+40oF to +650oF
D
1.50
1.50
1.50
1.50
1.50
2.00
2.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
E
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
5.69
5.94
6.22
6.75
7.25
7.75
8.81
10.31
11.44
11.94
12.94
13.94
14.94
17.19
5.13
5.63
6.19
7.25
8.25
9.25
11.38
13.63
15.88
16.88
18.88
20.88
22.88
26.88
6.75
7.25
7.25
7.75
8.25
8.81
9.81
11.44
12.44
12.94
13.94
14.94
15.94
18.19
7.25
8.25
8.25
9.25
10.25
11.38
13.38
15.88
17.88
18.88
20.88
22.88
24.88
28.88
7.75
8.25
8.25
8.81
9.31
9.81
10.94
12.44
13.44
13.94
14.94
15.94
16.94
19.19
9.25
10.25
10.25
11.38
12.38
13.38
15.63
17.88
19.88
20.88
22.88
24.88
26.88
30.88
8.81
9.31
9.31
9.81
10.44
10.94
11.94
13.44
14.44
14.94
15.94
16.94
17.94
20.19
11.38
12.38
12.38
13.38
14.63
15.63
17.63
19.88
21.88
22.88
24.88
26.88
28.88
32.88
Material Data:
Features:
All pipe sizes
Easy Installation
Positive stop - axially upward or downward
May be supported from below or above
Overlapping galvanized sheet metal jacket
Insulating structural inserts for load transfer
Other I.D.'s and/or O.D.'s Available on Request
Eliminates condensation sweating on chilled
water risers
CATALOG PS-2004
E5
FRONEK GROUP
Pipe
Size
Load
lbs
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
500
600
800
1200
1600
2000
2600
3200
3400
4000
4600
5000
5400
5600
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.88
0.88
0.88
0.88
0.88
0.88
0.88
B
0.38
0.38
0.38
0.38
0.38
0.38
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
C
0.38 x 3.00
0.38 x 3.00
0.38 x 3.00
0.38 x 3.00
0.38 x 4.00
0.38 x 4.00
0.50 x 4.00
0.50 x 5.00
0.50 x 5.00
0.50 x 5.00
0.50 x 6.00
0.50 x 6.00
0.50 x 6.00
0.50 x 6.00
Application:
Model E2100 through E2130 is designed for
use on:
Hot Water
Vacuum
Gas
Cold Water
Steam
Air
Dual Temperature Chilled Water
Intended for installation on:
Vertical runs of insulated pipe.
Other:
For handling downward loads only, see
E1200
Temperature Range:
+40oF to +650oF
D
1.50
1.50
1.50
1.50
2.00
2.00
2.00
3.00
3.00
3.00
4.00
4.00
4.00
4.00
E
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.75
0.75
0.75
0.75
0.75
6.19
6.44
6.72
7.25
7.75
8.25
9.81
10.81
11.94
12.69
13.69
14.69
15.69
17.69
5.38
5.88
6.44
7.5
8.5
9.5
11.88
13.88
16.13
17.13
19.13
21.13
23.13
27.13
7.25
7.75
7.75
8.25
8.75
9.31
10.81
11.94
12.94
13.69
14.69
15.69
16.69
18.69
7.5
8.5
8.5
9.5
10.5
11.63
13.88
16.13
18.13
19.13
21.13
23.13
25.13
29.13
8.25
8.75
8.75
9.31
9.81
10.31
11.94
12.94
13.94
14.69
15.69
16.69
17.69
19.69
9.5
10.5
10.5
11.63
12.63
13.63
16.13
18.13
20.13
21.13
23.13
25.13
27.13
31.13
9.31
9.81
9.81
10.31
10.94
11.44
12.94
13.94
14.94
15.69
16.69
17.69
18.69
20.69
11.63
12.63
12.63
13.63
14.88
15.88
18.13
20.13
22.13
23.13
25.13
27.13
29.13
33.13
Material Data:
Features:
All pipe sizes
Easy Installation
Positive stop - axially upward or downward
May be supported from below or above
Overlapping galvanized sheet metal jacket
Insulating structural inserts for load transfer
Other I.D.'s and/or O.D.'s Available on Request
Eliminates condensation sweating on chilled water
risers
CATALOG PS-2004
E6
FRONEK GROUP
Pipe
Size
Load
lbs
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
500
600
800
1200
1600
2000
2600
3200
3400
4000
4600
5000
5400
5600
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.88
0.88
0.88
0.88
0.88
0.88
0.88
B
0.38
0.38
0.38
0.38
0.38
0.38
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
C
0.38 x 3.00
0.38 x 3.00
0.38 x 3.00
0.38 x 3.00
0.38 x 4.00
0.38 x 4.00
0.50 x 4.00
0.50 x 5.00
0.50 x 5.00
0.50 x 5.00
0.50 x 6.00
0.50 x 6.00
0.50 x 6.00
0.50 x 6.00
Application:
Model E2200 through E2230 is designed for
use on:
Hot Water
Vacuum
Gas
Cold Water
Steam
Air
Dual Temperature Chilled Water
Intended for installation on:
Vertical runs of insulated pipe with upward
and/or downward load.
Other:
For handling downward loads only, see E1200
Temperature Range:
+40oF to +650oF
D
1.50
1.50
1.50
1.50
2.00
2.00
2.00
3.00
3.00
3.00
4.00
4.00
4.00
4.00
E
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.75
0.75
0.75
0.75
0.75
6.19
6.44
6.72
7.25
7.75
8.25
9.81
10.81
11.94
12.69
13.69
14.69
15.69
17.69
5.38
5.88
6.44
7.5
8.5
9.5
11.88
13.88
16.13
17.13
19.13
21.13
23.13
27.13
7.25
7.75
7.75
8.25
8.75
9.31
10.81
11.94
12.94
13.69
14.69
15.69
16.69
18.69
7.5
8.5
8.5
9.5
10.5
11.63
13.88
16.13
18.13
19.13
21.13
23.13
25.13
29.13
8.25
8.75
8.75
9.31
9.81
10.31
11.94
12.94
13.94
14.69
15.69
16.69
17.69
19.69
9.5
10.5
10.5
11.63
12.63
13.63
16.13
18.13
20.13
21.13
23.13
25.13
27.13
31.13
9.31
9.81
9.81
10.31
10.94
11.44
12.94
13.94
14.94
15.69
16.69
17.69
18.69
20.69
11.63
12.63
12.63
13.63
14.88
15.88
18.13
20.13
22.13
23.13
25.13
27.13
29.13
33.13
Material Data:
Features:
All pipe sizes
Easy Installation
Positive stop - axially upward or downward
May be supported from below or above
Overlapping galvanized sheet metal jacket
Insulating structural inserts for load transfer
Other I.D.'s and/or O.D.'s Available on Request
Eliminates condensation sweating on chilled
water risers
CATALOG PS-2004
E7
FRONEK GROUP
Pipe
Size
Load
lbs
12
14
16
18
20
24
6800
8000
9200
10000
10800
11200
1.13
1.13
1.13
1.13
1.13
1.13
B
0.50
0.50
0.63
0.63
0.63
0.63
C
0.50 x 7.00
0.50 x 7.00
0.63 x 7.00
0.63 x 7.00
0.63 x 7.00
0.63 x 7.00
Application:
Model E2300 through E2330 is designed for
use on:
Hot Water
Vacuum
Gas
Cold Water
Steam
Air
Dual Temperature Chilled Water
Intended for installation on:
Vertical runs of insulated pipe with upward
and/or downward load.
Other:
For handling downward loads only, see E1300
Temperature Range:
+40oF to +650oF
13.94
14.44
15.69
16.69
17.69
20.19
20.13
21.13
23.38
25.38
27.38
31.38
14.94
15.44
16.69
17.69
18.69
21.19
22.13
23.13
25.38
27.38
29.38
33.38
Material Data:
CATALOG PS-2004
E8
INTRODUCTION
FRONEK GROUP
SECTION G
INTRODUCTION
SECTION G
PIPE CLAMPS, PIPE GUIDE STRAPS, PIPE GUIDE U-BOLTS
APPLICATION For installation on standard 1-5/8 width framing channel.
The models listed in the Section Index are selected based upon the following considerations:
If your requirements are not covered by the Product Data Sheets in this catalog, please contact us at
713-731-0030 or 1-800-787-5914.
Please acquaint yourself with the Section Index on the page following this introduction for
assistance in determining the most appropriate pipe clamp, pipe guide strap, or pipe guide
U-bolt for your application
CATALOG PS-2004
SECTION G INDEX
FRONEK GROUP
MODEL
BARE
PIPE
G1000
G1200
FOR USE ON
BARE
COPPER
INSULATED
TUBING PIPE SUPPORT
PURPOSE
CLAMP
GUIDE
DUTY
LIGHT
LIGHT
X
HEAVY
X
G2000
G2200
G3000
TO ORDER, specify:
1. Quantity
2. Pipe Size & Type
3. Insulation Thickness
4. Model Number
5. For use on (bare pipe or insulated pipe support model)
EXAMPLE:
(20)
X
20
2 IPS
2-1/2
G1000
A1000
HEAVY
LIGHT
FRONEK GROUP
Maximum
Pipe Size
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12
Lateral
Load - Lbs
50
50
50
50
50
50
50
50
50
50
50
50
50
50
TABLE I
Insulation
Thicknesses
0
1/2
3/4
1
1-1/2
2
2-1/2
3
3-1/2
4
TABLE II
Application:
Features:
Material Data:
Easy installation
Rugged
Fits standard 1-5/8" width framing channel
Sized to clamp on O.D. of bare pipe
Sized to clamp on O.D. of insulated pipe support
models A1000 through A7400
Complete with top bolt and nut
Other sizes available on request
Hot Water
Cold Water
Chilled Water
Dual Temperature
Steam
Air
Gas
Vacuum
CATALOG PS-2004
G1
FRONEK GROUP
Neoprene
Sleeved
Maximum
Pipe Size
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12
Lateral
Load - Lbs
50
50
50
50
50
50
50
50
50
50
50
50
50
50
TABLE I
Copper
Maximum
Tubing
Lateral
O.D.
Load - Lbs
1-1/8
50
1-3/8
50
1-5/8
50
2-1/8
50
2-5/8
50
3-1/8
50
3-5/8
50
4-1/8
50
TABLE II
Application:
Features:
Material Data:
Easy installation
Rugged
Fits standard 1-5/8" width framing channel
Sized to clamp on O.D. of bare pipe or bare copper
tubing
Vibration isolator
Complete with top bolt and nut
Other sizes available on request
Neoprene sleeve eliminates galvanic action
between clamp, framing channel and copper tubing.
Hot Water
Cold Water
Chilled Water
Dual Temperature
Air
Gas
Vacuum
CATALOG PS-2004
G2
FRONEK GROUP
Maximum
Pipe Size
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12
Lateral
Load - Lbs
200
200
200
200
400
400
400
400
400
400
400
400
400
400
TABLE I
Insulation
Thicknesses
0
1/2
3/4
1
1-1/2
2
2-1/2
3
3-1/2
4
TABLE II
Application:
Features:
Material Data:
Easy installation
Rugged
Bolts to standard 1-5/8" width framing channel
Sized to clamp on O.D. of bare pipe
Sized to provide approximately 1/16" radial
clearance around O.D. of insulated pipe support
models A1000 through A7400
Complete with top bolt and nut plus two (2) tie
down bolts and channel nuts with springs
Other sizes available on request
Hot Water
Cold Water
Chilled Water
Dual Temperature
Steam
Air
Gas
Vacuum
CATALOG PS-2004
G3
FRONEK GROUP
Neoprene
Sleeved
Maximum
Pipe Size
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12
Lateral
Load - Lbs
200
200
200
200
400
400
400
400
400
400
400
400
400
400
TABLE I
Copper
Maximum
Tubing
Lateral
O.D.
Load - Lbs
1-1/8
200
1-3/8
200
1-5/8
200
2-1/8
400
2-5/8
400
3-1/8
400
3-5/8
400
4-1/8
400
TABLE II
Application:
Features:
Material Data:
Easy installation
Rugged
Bolts to standard 1-5/8" width framing channel
Sized to clamp on O.D. of bare pipe or bare copper
tubing.
Vibration isolator
Complete with top bolt and nut plus two (2) tie
down bolts and channel nuts with springs.
Other sizes available on request
Neoprene sleeve eliminates galvanic action
between clamp, framing and copper tubing.
Hot Water
Cold Water
Chilled Water
Dual Temperature
Air
Gas
Vacuum
CATALOG PS-2004
G4
FRONEK GROUP
Pipe
Size
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
Maximum
Lateral
Load-Lbs
50
50
50
50
50
50
50
50
50
50
Thread
1/4-20
1/4-20
1/4-20
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
BARE
A
B
1.25 2.75
1.5
3
1.75
3
2.25 3.5
2.5 3.63
2.88 3.88
3.5 4.38
4.13 4.63
4.63 4.88
5.13 5.13
1/2
A
2.5
2.5
2.88
3.38
3.5
4.13
4.88
5.38
5.88
6.38
B
3.38
3.38
3.63
4.13
4.13
4.38
4.88
5.13
5.38
5.75
Insulation Thickness
3/4
1
1-1/2
2
2-1/2
A
B
A
B
A
B
A
B
A
B
2.88 3.63 3.38 3.88 4.5 4.38 5.5 4.88 7.13 5.88
2.88 3.63 3.38 3.88 4.5 4.38 5.5 4.88 7.13 5.88
3.38 3.88
4
4.25
5
4.63 6.25 5.25 7.13 5.88
3.38 4.13 4.13 4.38 5.63 5.13 6.25 5.5 7.25
6
4.13 4.38 4.63 4.63 5.63 5.13 7.25
6
8.25 6.5
4.63 4.63 5.13 4.88 6.25 5.5 7.25
6
8.25 6.5
5.38 5.13 5.88 5.38 7.5 6.25 8.5 6.75 9.5 7.25
5.88 5.38 6.38 5.63 7.5 6.25 8.5 6.75 9.5 7.25
6.38 5.75 7.5 6.25 8.5 6.75 9.5 8.63 10.5 7.75
7.5 6.25 7.5 6.25 8.5 6.75 9.5 8.63 10.5 7.75
TABLE I
3
A
B
8.13 6.25
8.13 6.25
8.13 6.25
8.25 6.50
9.25 7.00
9.25 7.00
10.50 7.75
10.50 7.75
11.50 8.25
11.50 8.25
4
A
10.13
10.13
10.13
10.25
11.25
11.25
12.50
12.50
13.50
13.50
B
7.25
7.25
7.25
7.50
8.00
8.00
8.75
8.75
9.25
9.25
Application:
Features:
Material Data:
Easy installation
Sized to provide approximately 1/16" to 1/8" radial
clearance around O.D. of bare pipe or insulated pipe
support models A1000 through A7000
Complete with 4 hex nuts and 4 plain washers
Other sizes available on request
Hot Water
Cold Water
Chilled Water
Dual Temperature
Steam
Air
Gas
Vacuum
CATALOG PS-2004
G5