Professional Documents
Culture Documents
discovered
Gas can also be partially dissolved in oil or fill the elevated part of an oil field, forming a so-called gas cap.
Therefore, gas is often produced with oil and oil with gas.
85 per cent of gas and gas condensate deposits occur in natural reservoirs composed of sandy, sandyaleuritic, and aleuritic rocks often with clay interbeds. The remaining 15 per cent are confined in carbonate
rocks.
Geoscientists maps
Oil and gas prospecting begins with geological surveys. Geological maps representing the
structure of areas of the outer crust of the Earth are drawn upon the results of such survey.
In the course of field survey, geologists study outcropping rock beds, their composition, origin,
age, and deposition forms. Boundaries of distribution of these rocks are plotted on topographical
maps and areas of possible deposits of mineral fossils are outlined. These areas are further
prospected and explored in detail; then, fossil minerals are initially estimated. Gravitational,
magnetic, and seismic method are used to survey the subsurface.
Gravity prospecting
Magnetic prospecting
Seismic prospecting
Gravity prospecting
Gravity prospecting is based on dependence of gravity on density of rocks: oil- or gas-bearing
rocks have lower density than similar water-containing rocks. The mission of geoscientists
is to find locations with abnormally low gravity.
Magnetic prospecting
Magnetic prospecting is based on different magnetic conductivity of rocks. Airborne magnetic
survey enables the identification of anticlines natural geological traps for migrating
hydrocarbons at a depth of up to 7 kilometers.
Seismic prospecting
Seismic prospecting determines the structure of rock deposition using artificially created elastic
oscillations (seismic waves) when passing though the stratum. In terms of physics, these are
the same acoustic waves as on the surface, which resulted from a medium perturbance and
reflected from a surface. Echoes of seismic waves are detected by seismographs. Seismic
prospecting is used not only for finding structures, which can contain hydrocarbons, but also for
the selection of an optimal site for drilling prospecting wells. Seismic method is often used
in conjunction with drilling to enhance reliability of forecasting.
Geochemical prospecting
There are also geochemical methods for prospecting hydrocarbon deposits based on studies
of the chemical composition of underground water and the content of dissolved gases and
organic matters in it. Concentration of these components in water increases as it approaches
the deposit.
Drilling is reliable
However, the only method to know for sure whether a trap has commercial amounts of gas or oil
is to drill a well. On average, only every third drilled well turns out to be a legitimate field.
helped the company achieve this result. Gazprom has secured excess of the reserves
replenishment over the level of production since 2005.
Geological exploration remains one of the most effective means for increasing reserves.
In 2010, prospecting and exploration operations enabled an increment of over 547.7 billion
cubic meters of natural gas ensuring its replenishment rate of 108 per cent. Gazprom continues
working on optimization of the volumes and improvement in efficiency of geological exploration
in order to secure stable mid- and long-term production growth.