Professional Documents
Culture Documents
of heating and
ventilation
HEATERS
Applications
Stage one: Flush mount heaters are supplied with a metal wall box
which is fitted to framing studs. The special socket in the wall box can
be terminated at the same time wiring is laid to flush boxes from the
distribution board.
Stage two: The builder then puts up the wallboard, covering the
Standard
Model
wall box. Once a hole is cut
for the heater
and decoration is complete,
Easy to install with a unique internal plug and socket for twospare. to take the heater out of its packaging
Four position rotarythe
switch.
electrical
contractor
returns
stage installation.
Can
be wired
remote
thermostat.
Neon indicator for power
available.
and plug
it into the pre-wired
socket
in the with
wall box.
The
heater is
Flush mount and surface mount options.
Optional
flush
surround.is complete.
Two heat settings: 1000W
& 2000W
then
screwed
to
the
wall
box
and
tested.
Installation
Designed for new installations as well as retrofits.
Fan only setting.
Can be fitted to gib, plasterboard, concrete or brick walls.
low profile(two
flushselfsurround is supplied with every flush mount
Triple safety cut-outAprotection
Compact, stylish range.
Thermosafe
heater
as a decorative option.
resetting element
Triple safety cut-out protection for Thermosafe heating.
cut-outs plus thermal fuse).
Axial fan ensures simple, reliable and quiet heater operation.
Fitted with air filter and
supplied
with
a retrofits
Flush
mount
Fan only setting allows the heater to operate as a cooling fan in
Stage one: A hole is cut for the wall box adjacent to a framing
summer.
stud. Wiring is drawn through into the wall box prior to securing the
Easy to clean.
box to the stud on one side. The wall box is
Fitted with an air filter and supplied with a spare.
then secured to the wallboard
on at least
one other side
Air filter is easy to remove for cleaning.
Cat 3303
Standard
Model
using
the
supplied
clips.
The
special
socket
in the wall box
Control panel is positioned under a cover so it wont
invite
spare.
Four position rotary switch.
can
then
be
terminated.
unwanted attention.
Can be wired with remote thermostat.
Neon indicator for power available.
Selected models have a frost watch feature, thermostat
delay,
Two heat
settings: 1000W
&
2000W
Stage two: The heater is thenOptional
pluggedflush
in andsurround.
fitted to the wall box as
two-speed fan, audible alarm for blocked airflow,
LED
Fan indicator
only setting. above for testing.
for power on, blocked filter and 24-hour programmable
Triple safety cut-out protection (two selfrotary timer.
resetting element
Cat 3303
Cat 3303
Standard Model
spare.
Can be wired with remote thermostat.
Optional flush surround.
Page 2
EXHAUST FANS
Applications
PDL exhaust fans are designed for a range of
domestic and commercial applications
including:
Kitchens
Bathrooms
Toilets
Ensuites
Living Rooms
Bedrooms
Laundries
Garages
Workshops
Cat 3303
Standard Model
spare.
Can be wired with remote thermostat.
Optional flush surround.
Features
Motor
Stylish
Easy to install
Easy to clean and maintain
Manufactured from thermal, shockresistant plastic material for durability
and maximum performance
Ducting
Light weight
Strong and flexible aluminium ducting
for in-line and wall/ceiling fans
Highly flexible PVC with spring steel helix
wire for in-line fans
Operates in temperatures from
-5C to 70C
Page 3
Standard Model
spare.
Can be wired with remote thermostat.
Optional flush surround.
Standard Model
spare.
Can be wired with remote thermostat.
Optional
flush surround.
Good
ventilation
Standard Model
spare.
The
fans allow you to shut windows to keep
Can heat
be wired
with
remote
thermostat.
valuable
in and
reduce
drafts,
while at
same
Optional
surround.
the
timeflush
preventing
condensation and
stale air.
A good ventilation system also prevents
costly maintenance expenses by preserving
the life of the building.
INDEX
HEATERS
TOWEL RAILS
Bathroom heaters
Towel rails
Page 5
Page 5
Cat 3303
Standard Model
spare.
Four position rotary switch.
Can be wired with remote thermostat.
Neon indicator for power available.
Optional flush surround.
Two heat settings: 1000W & 2000W
Fan only setting.
Heating calculations
Triple safety cut-out protection (two selfresetting element
Page 8
cut-outs plus thermal fuse).
Fitted with air filter and supplied with a
DIMENSIONAL DRAWINGS
10.0
8.0
8.8
9.4
7.5
7.6
8.2
8.8
7.0
6.6
7.2
7.6
8.2
6.5
5.7
6.1
6.6
7.0
7.6
6.0
4.8
5.2
5.7
6.0
6.4
6.9
5.5
4.3
4.8
5.1
5.5
6.0
6.3
5.0
3.6
3.9
4.2
4.6
4.9
5.4
5.7
4.5
2.5
2.8
3.1
3.4
3.7
4.0
4.3
4.6
4.9
4.0
1.9
2.2
2.5
2.7
3.0
3.3
3.6
3.9
4.0
4.5
3.5
H
EA
T
EQ
U
IR
3.9
3.1
0.6
1.3
1.6
1.9
2.1
2.4
2.5
2.8
3.1
3.3
3.6
3.7
3.0
1.0
1.2
1.3
1.5
1.8
1.9
2.1
2.4
2.5
2.7
3.0
3.1
2.5
0.8
0.9
1.0
1.2
1.4
1.5
1.6
1.9
2.1
2.2
2.5
2.5
2.0
K
IL
O
W
A
T
ED
IN
Page 6, 7
(k
2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0
Cat 3303
Standard Model
spare.
Four position rotary switch.
Can be wired with remote thermostat.
Neon indicator for powerHeater
available.dimensional
Optional flush surround.
Two heat settings: 1000W & 2000W drawings
Fan only setting.
Triple safety cut-out protection (two self- Page 9
resetting element
cut-outs plus thermal fuse).
Fitted with air filter and supplied with a
67
255
338
362
255
FANS
Exhaust fans
Page 10
Page 11
Neutral
(Blue)
Trigger Switch
(Not included)
+
Phase
(Brown)
Phase (Brown)
Switched Phase (Black)
Neutral (Blue)
Motor
Wires
Fan accessories
Page 11
Page 4
Stud
Cat 3208
3303
Cat
2.4kW
heater
Cat 3208
Standard Model
spare.
Fan
Four
position
rotary switch.
forced
heating
Can be wired with remote thermostat.
Two
Neon
indicator
for
power
available.
safety cut-outs for added protection.
to
Optional
flush surround.
Automatic
Two heat step-down
settings: 1000W
&
2000W
thermostat reduces output
1200 watts.
Permanent
Fan only setting.
installation required.
1 Triple
safety cut-out protection (two selfyear warranty.
resetting element
cut-outs plus thermal fuse).
Fitted with air filter and supplied with a
Standard Model
spare.
Four position rotary switch.
TSTR60
& TSTR80
towel
rails
Can be wired with remote thermostat.
Neon indicator
for power
available.
Optional
flush surround.
TheTwo
heat
settings:
1000W
&
2000W
two new models of Thermosafe heated towel
rails provide
a 60 watt option for
either
Fanthe
only
setting.
smaller sized bathroom or ensuite as well as an 80 watt option for the
Triple safety cut-out protection (two selffamily sized bathroom.
resetting element
cut-outs
plus thermal
fuse).
Both
heated
towel rails
are rated IP34 splashproof and are double insulated for
Fitted with
air filter
and supplied with a
maximum
safety
protection.
Cat 3303
Four position rotary switch.
Cat
TSTR60
Standard Model
Cat 3303
Four position rotary switch.
Cat
TSTR80
Standard Model
spare.
Can be wired with remote thermostat.
Neon indicator for power available.
1 heat setting 60 watts
Optional flush surround.
Two heat settings: 1000W & 2000W
Towel rails coated in scratch resistant enamel.
Fan only setting.
Reversible mounting brackets for versatility in installation.
Triple safety cut-out protection (two self Rated IP34 splashproof.
resetting element
Permanent installation required.
cut-outs plus thermal fuse).
1 year warranty.
Fitted with air filter and supplied with a
Cat TSTR60
spare.
Can be wired with remote thermostat.
Neon indicator for power available.
1 heat setting 80 watts
Optional flush surround.
Two heat settings: 1000W & 2000W
Towel rails coated in scratch resistant enamel.
Fan only setting.
Reversible mounting brackets for versatility in installation.
Triple safety cut-out protection (two self Rated IP34 splashproof.
resetting element
Permanent installation required.
cut-outs plus thermal fuse).
1 year warranty.
Fitted with air filter and supplied with a
Cat TSTR80
Page 5
Standard model
Cat 3303
Thermostat
Cat 3304
Thermostat Plus
Cat 3305
Thermostat control.
Thermostat delay (when thermostat
switches off, fan continues to run quietly
to remove residual heat for more accurate
thermostat operation).
Frost watch (the heater switches on when
the room temperature falls below
approximately 5C).
Audible alarm (alarm will sound to
indicate a fault such as that the air flow is
restricted at the inlet or outlet).
Optional flush surround.
Timer model
Cat 3306
Thermostat control.
Thermostat delay (when thermostat
switches off, fan continues to run quietly
to remove residual heat for more accurate
thermostat operation).
Frost watch (the heater switches on when
the room temperature falls below
approximately 5C).
Audible alarm (alarm will sound to
indicate a fault such as that the air flow is
restricted at the inlet or outlet).
24-hour programmable rotary timer with
AUTO/MANUAL/OFF switch.
Optional flush surround.
Page 6
Page 7
To calculate the heating requirement for your room, use the formula
below as a guide. Figures are calculated on a minimum requirement of
44 Watts per cubic metre but are subject to local climate conditions.
Factors:
Lounges/living areas/offices
Bedrooms/halls
Other non-critical areas
1.5
1.2
0.8
Add 10% if the room has a large window area, 10% if partially
insulated (eg ceiling only) or 20% if the room is not insulated.
Example:
If standard models (Cat 3303 and 3313) are used, they can be wired
into a common thermostat. Otherwise, individual heater thermostats
can control room temperature efficiently.
54CuM
x
=
44
2376 Watts
x
=
1.5
3564 Watts
+
=
356
3920 Watts or 3.92kW
9.4
7.5
7.6
8.2
8.8
7.0
6.6
7.2
7.6
8.2
6.5
5.7
6.1
6.6
7.0
7.6
6.0
4.8
5.2
5.7
6.0
6.4
6.9
5.5
3.9
4.3
4.8
5.1
5.5
6.0
6.3
5.0
3.1
3.6
3.9
4.2
4.6
4.9
5.4
5.7
4.5
2.5
2.8
3.1
3.4
3.7
4.0
4.3
4.6
4.9
4.0
1.9
2.2
2.5
2.7
3.0
3.3
3.6
3.9
4.0
4.5
3.5
1.3
1.6
1.9
2.1
2.4
2.5
2.8
3.1
3.3
3.6
3.7
3.0
1.0
1.2
1.3
1.5
1.8
1.9
2.1
2.4
2.5
2.7
3.0
3.1
2.5
0.8
0.9
1.0
1.2
1.4
1.5
1.6
1.9
2.1
2.2
2.5
2.5
2.0
8.0
8.0
7.1
7.6
7.5
6.1
6.6
7.1
7.0
5.3
5.7
6.1
6.6
6.5
4.5
4.9
5.3
5.6
6.1
6.0
3.8
4.2
4.6
4.8
5.2
5.5
5.5
3.1
3.5
3.8
4.1
4.4
4.8
5.0
5.0
2.5
2.9
3.1
3.4
3.7
4.0
4.3
4.6
4.5
2.0
2.3
2.5
2.7
3.0
3.2
3.5
3.7
4.0
4.0
1.6
1.8
2.0
2.1
2.4
2.6
2.9
3.1
3.2
3.6
3.5
1.1
1.3
1.6
1.7
1.9
2.0
2.3
2.5
2.6
2.9
3.0
3.0
0.8
0.9
1.0
1.2
1.4
1.6
1.7
1.9
2.0
2.1
2.4
2.5
2.5
0.6
0.7
0.8
1.0
1.1
1.2
1.3
1.6
1.7
1.8
1.9
2.0
2.0
0.6
0.5
2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0
2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0
Page 8
(k
W
T
H
EA
T
EQ
IR
ED
IN
IL
W
A
T
EA
T
EQ
U
IR
ED
IN
IL
O
W
A
T
(k
W
10.0
8.8
67
255
338
362
255
373
360
273
39
380
360
373
294
273
42
273
Page 9
114
373
360
360
373
EXHAUST FANS
Exhaust fans
PDL in-line and wall/ceiling fans provide simple solutions to domestic and
ventilation problems.
They are designed to create a healthy living environment through controlled
replacement of surrounding air.
PDL fans are manufactured from thermal, shock-resistant plastic material for
durability and maximum performance. Ideally suited for WC, kitchens, bathrooms
and laundries.
Duct
100mm/4
120mm/5
150mm/6
Duct
100mm/4
120mm/5
150mm/6
Specifications
Cat no
6401/6402
6501/6502
6601/6602
100/4"
120/5"
150/6"
85
130
230
0.65
0.30
0.80
3.4
4.3
5.1
230V
230V
230V
P(mm/H20)
6
5
4
3
11
15
29
44
46
50
AS/NZS Standards
AS/NZS3350
AS/NZS3350
AS/NZS3350
Approvals
V41
V41
V41
Insulation class
II
II
II
IP Rating
IPX2
1PX2
IPX2
40C
40C
40C
Weight (kg)
0.62
0.77
1.08
Page 10
Cat 6601/6602
Cat 6501/6502
Cat 6401/6402
Q(m3/h)
ACCESSORIES/WIRING DIAGRAMS
Through wall kits
For use with in-line or wall/ceiling fans to extract air away from the outside of
the building.
Cat 6412
Cat 6512
Cat 6612
As for 6412 but with 6" aluminium ducting.
Timers
Designed for efficiency and economy, timers prevent power wastage. Timers are
fitted inside the fan; when the fan is switched off, it will continue running for the
pre-set time to clear the air, then turn off automatically.
Wiring diagrams
In-line fans
Wall/ceiling fans
Without a Timer
Light Switch
(Optional)
Light
Connection
Neutral
(Blue)
Phase
(Brown)
N
Phase
Neutral (Blue)
Phase (Brown)
Phase (Brown)
Switched Phase (Black)
Neutral (Blue)
Motor
Wires
Page 11
Phase
(Brown)
(Brown)
Switched
Phase
(Black)
Neutral
(Blue)
Phase
(Brown)
Neutral
(Blue)
(Not included)
Without a Timer
Neutral
(Blue)
Trigger Switch
(Not included)
Trigger
Switch
PDL products are privileged to reside in almost every New Zealand home and
office. People touch PDL products millions of times across the country, every day.
PDL is also a significant exporter, earning foreign exchange for New Zealand by shipping industrybest value-added product around the globe.
The PDL Electrical Products range (largely made in Christchurch) offers an extensive range of
switch and wiring accessories. The PDL Electronics range (made in Napier) involves high-tech
electronic solutions for industrial applications.
In just over six decades, PDL has stamped its indelible hallmark of quality and innovation on the
domestic, commercial and industrial markets in everything from electrical accessories to industrial
switchgear, AC variable speed drives to home automation.
Plastic & Die Casting Ltd, founded in 1947 was purchased by the then Bob Stewart in 1957 and
renamed PDL Industries Ltd. It was Sir Robertson Stewart's acumen which created the vehicle
which allowed PDL to grow and thrive for the balance of the 20th century. PDL grew from 12
staff and sales of NZ$5000 per annum, to 2000 staff and NZ$350m sales across 3 continents
in 60 years.
Schneider Electric acquired the PDL Group in 2001. Schneider Electric's world-wide distribution
network now offers the PDL brand to a wider global market.
PDL products continue to be designed and engineered by New Zealanders, from independent
PDL manufacturing facilities in Christchurch and Napier. PDL is a Kiwi brand and we take genuine
pride in that.
PDL is part of Schneider Electric's family of leading electrical brands. As with Merlin Gerin,
Square D and Telemecanique PDL products are marketed locally by Schneider Electric
New Zealand.
PDL Electrical Products are available through electrical wholesalers New Zealand wide.
PDL Electrical Products are designed and engineered to ISO 9001.
Freecall: 0800 652 999, Freefax: 0800 101 152
Email: sales@nz.schneider-electric.com
Website: www.schneider-electric.co.nz
Schneider Electric (NZ) Ltd, Head Office
14 Charann Place, Avondale
PO Box 15355, New Lynn
Tel + 64 9 829 0490
Fax + 64 9 829 0491
Owing to changes in standards and equipment, the characteristics given in the text and images in this document are not binding until
they have been confirmed with us.
NZ1203THERMOSAFE
Replaces NZT. THERMOSAFE 12/98
NZAUT/EFANS/B/1001A
THERMOARCH-NZ-5-99