Professional Documents
Culture Documents
For establishing communication between relay & computer, both relay & computer should be in the
same network. Use a LAN cable connection directly between relay & Laptop.
Preparing LAPTOP/DESKTOP for communicating with RELAY:
Go to the CONTROL PANEL>>NETWORK CONNECTIONS>>
Select the INTERNET CONNECTION>> Right Click on this name & select PROPERTIES.
Select INTERNET PROTOCOL>> and press PROPERTIES Button as seen in picture above.
Enter the IP Address as 5.0.0.100 to the Laptop. Press OK to save the IP address to save the IP to Laptop.
Preparing RELAY for communication:
Go to relay front face, Rotate knob/ use UPor DOWN buttons to go to MENU>>
CHANGE SETTINGS>>PRODUCT SETUP>>COMMUNICATIONS>>ETHERNET>>ETHERNET1>>
IP OCTET1: 5
IP OCTET2: 0
IP OCTET3: 0
IP OCTET4: 150
SUBNET MASK OCTET 1: 255
SUBNET MASK OCTET 2: 255
SUBNET MASK OCTET 3: 255
SUBNET MASK OCTET 4: 0
Now, rotate knob extremely right to save changes to relay. (Press enter to save settings)
5.0.0.150
255.255.255.0
With this reply , we can be sure, that F650 relay is able to communicate with the relay. Now you may
close this ping screen.
CONNECTING RELAY TO 650-Setup program:
Now, go to the F650 Setup>>COMMUNICATION>>COMPUTER>>
Select the CONTROL TYPE: MODBUS/TCP
IP Address as : 5.0.0.150 and PRESS
the relay. Status should read: Setup is now talking to an 650 Then press
communicating with relay.
Relay is now
Above guide lines can be used for establishing Ethernet communication between relay & Laptop in UR
and similar relays.