Professional Documents
Culture Documents
Features:
Maintenance-free gear
motor with proven
250,000 cycle life
Electric operation
eliminates the cost
and weight of an air
compressor and
the inconvenience
of air piping
Non-backdrivable
mechanism holds door
closed without electric
power or additional
latching devices
Vapor Bus International, the leading power door system manufacturer in North America, introduces
the better electric actuator for the light and medium-duty bus market. Designed specifically for
shuttle buses, replica trolleys, limo-buses and midi-buses, this compact unit fits the available space.
Its single-plane output geometry simplifies application design and increases force transfer, while
minimizing unwanted reaction loads. Incorporating technology proven in decades of demanding
transit vehicle service, the Vapor Electric Door Actuator provides convenient, reliable operation
for swing doors. Doors can be opened and closed by a seated driver with a flick of a switch.
An electric prime mover transmits motion to the doors through connecting rods and door shaft
levers, limiting door forces to just the right amount, regardless of door position. All moving linkage
parts are mounted above the header plate, away from passenger contact.
For simple installation, convenient operation and long-term reliability, the Vapor Electric Door
Actuator is the clear choice.
Technical Specifications
Operating voltage: 12VDC nominal
Typical operating current: 4 amps
MAX stall current: 22 amps
Motor torque on pinion: 90 pound-inches, min.
Minimum transferred torque: 600 pound-inches
Release force on emergency handle: Less than 20 lbs.
Door shaft rotation: 90
Emergency release
allows manual opening
of doors if electric
power is lost
Compact package for
application flexibility
4.
5.
Base Number
Dash Number
Hex // T.E. Hex // Panel
-27
-28
-29
-30
-31
-32
-33
-34
-35
-36
-37
-38
-39
-40
-41
-42
-43
-44
-45
-46
-47
-48
27.00 - 27.75
27.76 - 28.75
28.76 - 29.75
29.76 - 30.75
30.76 - 31.75
31.76 - 32.75
32.76 - 33.75
33.76 - 34.75
34.76 - 35.75
35.76 - 36.75
36.76 - 37.75
37.76 - 38.75
38.76 - 39.75
39.76 - 40.75
40.76 - 41.75
41.76 - 42.75
42.76 - 43.75
43.76 - 44.75
44.76 - 45.75
45.76 - 46.75
46.76 - 47.75
47.76 - 48.00
BILL OF MATERIALS
Item
Description
Qty.
Actuator
Connecting Rod
Pivot Housing
Pivot Bearing
Retaining Clip
10
11
12
-57
-58
-59
-60
-61
-62
-63
-64
-65
-66
-67
-68
-69
-70
-71
-72
-73
-74
-75
-76
-77
-78
SECTION C-C
HEX SHAFT ORIENTATION
(5/8 HEX)
HEX // T.E.
DOOR
PANEL*
TRAILING EDGE
HEX // Panel
FLAT SIDE OF HEX IS PARALLEL
TO OUTSIDE OF PANEL
DOOR
PANEL*
(5/8 HEX)
3.60
MINIMUM DISTANCE FROM CENTER OF OPERATOR TO
INSIDE WALL OF HEADERPLATE OR ANY OTHER BUS STRUCTURE
(2.01)
HEADERPLATE
(SUPPLIED BY BUS BUILDER)
MIN. 11 GA. THICKNESS
(2.33)
7.06
(SIZE OF OPERATOR)
NOTE:
All dimensions in INCHES
unless otherwise noted.
14.02
WITH TERMINAL BLOCK
.23
CABLE TIE PROTRUSION
(2X)
3
8
.12
.12
4
4
10
10
Phone: 847.777.6400
Fax: 847.520.2222
Email: vaporbusinfo@wabtec.com
www.vapordoors.com
U.S. and foreign patents are applicable and/or pending to products described and illustrated herein.
Vapor reserves the right to discontinue products or change product specifications or designs at any time without notification.