You are on page 1of 4

Obel-P-Products

News
New test criterion & resulting product solutions from Obel-P
Do not perform the atomising test on slide fuel valves
MAN B&W (service letter SL03-418/JOF)

The slide valve introduced by MAN B&W is now standard on all new MAN B&W engine types and
also the valves are available for retrofit purposes. The introduction of the new slide fuel valves
means that we are confronted with the new test criterion, mentioned above.
To meet this new criterion from MAN B&W, we can now offer 2 new product solutions to
shipowners, ship management companies and engine builders etc.
The atomising test has been part of the normal maintenance practice for a long time and,
therefore, a 100% safe solution is called for!
Consequently we have developed a completely new test pump unit, type VPUD 1000, for new
engines, where the atomising test cannot be executed at all.
For vessels already in service, and therefore already equipped with a test rig, we have developed
an alternative and lower-priced solution, which can be used on any type of test rig not only an
Obel-P test rig! The result is the same as with a new pump unit, i.e. the atomising test cannot be
executed.

Both products have


been approved by
MAN B&W, and
recommended for
testing of all fuel
valves on the MAN
B&W engines.

MAN B&W recommend that the


new pump unit type is also used
for the conventional valves.

Conventional fuel valve

Slide fuel valve

Source: MAN B&W service letter SL02-403/UM, June 2002

Ib Obel
Pedersen
A/S.
MarineDivision.
Division. Lerhoj
Bagsvard,
Denmark
Ib Obel
Pedersen
A/S.
Marine
Lerhoj10,
10,DK-2880
Dk-2880
Bagsvard,
Denmark
Phone:
4498
3833.
Fax:
+454498
44981125.
1125. E-mail:
E-mail: obel-p@obel-p.dk.
www.obel-p.dk
Phone:
+45+45
4498
3833.
Fax:
+45
obel-p@obel-p.dk.Homepage:
Homepage:
www.obel-p.dk

The working pressure is shown at the top


line on the display. When the opening
pressure test is performed the result is
frozen and shown on the bottom line on the
display.
The adapter unit is operated with a switch
button. To perform the opening pressure test
it is turned to the right. To perform the
venting function test it is turned to the left.

Can be used
together with
any test rig

Ib Obel Pedersen A/S. Marine Division. Lerhoj 10, Dk-2880 Bagsvard, Denmark
Phone: +45 4498 3833. Fax: +45 4498 1125. E-mail: obel-p@obel-p.dk. Homepage: www.obel-p.dk

Obel-P-Products

The atomising
test cannot be
executed.

When the opening


pressure of the valve
is reached the precise
opening pressure will
be shown on the
display.

Ib Obel Pedersen A/S. Marine Division. Lerhoj 10, Dk-2880 Bagsvard, Denmark
Phone: +45 4498 3833. Fax: +45 4498 1125. E-mail: obel-p@obel-p.dk. Homepage: www.obel-p.dk

Obel-P-Products
Technical specifications:
Adapter unit type PPMI 1000 for fuel valve test rigs:
Max operating pressure:

1200 bar

Connection high pressure input:

Male coupling CEJN

Connection high pressure output:

High pressure hose 1 meter with female coupling CEJN

Supply voltage:

Single phase 115/230 V AC

Output voltage:

24 V DC

Operation temperature:

-10o C to 50o C

Classification:

Display: class 0,2

Weight

3,5 kgs

Dimensions:

190 x 190 x 150 mm

New pump unit type VPUD 1000:


Output pressure:

Max. 1100 bar at 10 bar air input


Max. 800 bar at 7 bar air input

Air consumption:

50 Litres per cycle at 10 bar air input


36 Litres per cycle at 7 bar and no output pressure

Max flow at no pressure:

1,2 Litres per min. (at an air input of 7 bar)

Displacement pr. cycle:

20 cc (1,22 CU.IN)

Cycle frequency/pumping speed:

60 cycles per min. at 7 bar air input and no output pressure

Tank capacity:

6 Litres

Classification:

Gauge: class 1,0. Display: class 0,2

Weight

100 kg empty

Dimensions:

560 x 950 x 1525 mm

Power supply:

Single Phase 115/230 V AC

Ib Obel Pedersen A/S. Marine Division. Lerhoj 10, Dk-2880 Bagsvard, Denmark
Phone: +45 4498 3833. Fax: +45 4498 1125. E-mail: obel-p@obel-p.dk. Homepage: www.obel-p.dk

You might also like