You are on page 1of 9

Xiamen Caimore Communication Technology Co.

,Ltd
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
Contact person: Michelle
E-mail: sales06@caimore.com
Skype: caimoremichelle
Mobile phone: +86-15080025764

-----------------------------------------------------------------------------------------------------------

Xiamen Caimore Communication Technology CO., LTD.

The combine solution of elevator alarm intercom and video monitoring

Statement
Copyright:
All information in this user manual is protected by copyright law. Whereby, no
organization or individual shall copy or reprinted the whole or part of this user
manual by any means without written authorization from Xiamen Caimore
Communication Technology Co.,Ltd.
Trademarks :

Caimore,

, & CAIMORE are all registered trademarks of Xiamen

Caimore Communication Technology Co.,Ltd. Other trademarks mentioned in this


manual belong to other organizations related. Xaimen Caimore Communication
Technology Co.,Ltd does not own the right of other trademarks and logos.
Notice:
Due to product updates or functional upgrading, we may renew the content of
this file, and this file only for reference. All the statements, information,
recommendations, etc. in this file do not compose any form of guarantee and we
Caimore reserves the right of final explanation.
ALL Right Reserved@Caimore

Preface
Tel:+86 592 5901215

Web: www.caimore.com/emain.asp

Xiamen Caimore Communication Technology Co.,Ltd


2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
Contact person: Michelle
E-mail: sales06@caimore.com
Skype: caimoremichelle
Mobile phone: +86-15080025764

----------------------------------------------------------------------------------------------------------China's existing elevator over 30 million units, the demand for about 50,000
per year. Elevator to 24 hours of uninterrupted operation, safe operation of the
lift is that people are most concerned.
Affect the safe operation of the elevator there are two factors, one is the
quality and reliability of the elevator system itself; the second is caused by
human factors inside the elevator car safety.
For a long time the elevator intercom system mainly uses the bus intercom
system, the safe operation of elevators mandatory one, but with the popularity
of video surveillance systems, the newly installed elevator Start to install video
surveillance, improve the safety of operation of the elevator.
In the elevator installation of video surveillance video often have to face the
problem of interference, because the elevator motor is running along with
strong electromagnetic radiation signals that may cause interference video
surveillance images. To solve the problem of video interference, through plant
will use video interference.
Elevator video intercom alarm systems linked in this article, to give contractors
and users in the practical application of the new and old systems. It is only
through a single video cable can achieve transmission of video surveillance
images, the alarm signal transmission, audio and video intercom signals, with
video interference. This reliable non-line transmission structure, reliable alarm
mode, high-quality audio broadcast intercom mode, the alarm automatically
switch video images when the alarm lift linkage, greatly improving the safe
operation of elevators, reduces cable material, shortening construction time
and reduce the system cost.

The system of elevator alarm intercom and video monitoring


Elevator video intercom alarm linkage system is already applied for a patent new
Tel:+86 592 5901215

Web: www.caimore.com/emain.asp

Xiamen Caimore Communication Technology Co.,Ltd


2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
Contact person: Michelle
E-mail: sales06@caimore.com
Skype: caimoremichelle
Mobile phone: +86-15080025764

----------------------------------------------------------------------------------------------------------technology does not require laying of cables, use the elevator video monitoring cable not
only transmit video monitor signal can also transmit alarm signals, audio intercom,
through SCM control technology and computer management software video intercom
realize alarm linkage control, networked control 128 elevators.
The system Working principle
Video linkage control system core equipment is controlled by a single audio and video
modulator (referred to as: modulators), 8-way audio and video linkage controller
(hereinafter: controller), video linkage switch (abbreviated) switch management computer
components. In coupled pickups, loudspeakers, radio amplifier can form joint elevator
video intercom alarm monitoring system.
Audio and video transmission. CATV audio and video signal transmission technology, the
camera's video signal modulation 0 ~ 6MHz to the 49.75MHz frequency band above, the
use of coaxial cable 0 ~ 1GHz bandwidth to transmit audio and video signals. This
transmission and video interference, as Personal Emergency of cable, high-frequency
signal sent by the controller modulator demodulator module demodulates the audio and
video signals.
Alarm signal transmission. Has applied for patents for inventions with a new technology
that uses low-frequency coaxial cable, elevator alarm button, directly using a common
normally open alarm mode, the alarm signal directly transmitted to the terminal controller
with a video cable, by the controller the alarm data transmitted to the management
computer.
Radio signal transmission. Passive loudspeakers placed in the elevator, is connected to
the modulator. Give instructions to the controller by the management computer, video
cable broadcast signal transmitted to the elevator in the loudspeakers.
System control. The system uses RS232 and RS485 control from the computer and the
controller, switch two-way data communication, realization of the system function is
performed by the controller of the microcontroller and manage computer-controlled.
Systems may be connected to 16 8-way audio and video linkage controller to achieve 128
Tel:+86 592 5901215

Web: www.caimore.com/emain.asp

Xiamen Caimore Communication Technology Co.,Ltd


2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
Contact person: Michelle
E-mail: sales06@caimore.com
Skype: caimoremichelle
Mobile phone: +86-15080025764

----------------------------------------------------------------------------------------------------------monitoring points of video, alarm, audio intercom, control linkage.


The functions be achieved by system
When pressed the alarm button in the elevator, the elevator control room monitor to
automatically switch the display of video images and elevator alarm sound monitor
elevator, the controller alarm tone.
broadcast signal switching can be achieved with the elevator intercom personnel.
Meanwhile more than 2 lifts alarm, the computer can not display more than 2 alarm
prompt, alarm and automatically switch to the latest elevator screens, intercom.
monitor elevator intercom and alarm detection. Usually through computer
management software to switch the display of video images each elevator, and can return
the sound through the intercom, inspection and monitoring images and intercom
functions.
tripartite intercom or five-party talk. Five-party intercom cable can be connected to a
video cable, elevator maintenance when necessary to maintain multi-intercom, intercom
equipment can be simple or small PBX access to multi-party intercom.
for high-grade elevators, elevators need to run data terminal equipment to the control
room, and remote control of the elevator, the elevator run more reliable, more convenient
and efficient to solve the elevator malfunction. In the elevator controller will increase the
data transfer operation of the elevator controller may be to the terminal device and
remote control.
Each elevator car inside the main equipment: audio and video control modulator (referred
to as: modulators), alarm button, microphone, loudspeaker, camera.
a. audio pickup installed in the elevator car control panel, the audio output is connected to
the modulator. You can adjust the volume by volume control on the pickup. Pickup can
choose built-in microphone or an external microphone.
b. elevator alarm button connected to an alarm on the modulator / broadcast control port,
alarm signal transmission cable directly transmitted to the terminal device.
c. passive loudspeakers connected to the alarm on the modulator / broadcast control port,
Tel:+86 592 5901215

Web: www.caimore.com/emain.asp

Xiamen Caimore Communication Technology Co.,Ltd


2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
Contact person: Michelle
E-mail: sales06@caimore.com
Skype: caimoremichelle
Mobile phone: +86-15080025764

----------------------------------------------------------------------------------------------------------an alarm signal is received after the completion of the terminal device to give a broadcast
signal, the audio two-way intercom. If the loudspeakers appear disconnected, it will
automatically send an alarm signal.
d. Connect your camcorder to the video input port on the modulator.
e. transmission cable is connected to the RF output port of the modulator.
f. modulator power and camcorders, DC12V.

Terminal Equipment Installation


8-way audio and video alarm linkage controller (hereinafter: controller)
May be in signal communication with 8 inside the elevator car modulator.
8-way audio and video alarm linkage controller
8 root elevator car video transmission cable to the 8-channel video input port.
8 video outputs and 8-channel audio output is connected to the DVR.
more than one network, audio and video output is connected to the audio and video
control signal switch.
8 alarm test port for test alarm.
RS485 and RS232 communication ports that use more than one available RS232
communication via RS485 communication, a single.
When a single use, COM radio amplifier audio output connection. When connected to
the network using audio and video control signal switch.
Function: usually receives 8-way audio and video signals and outputs to the DVR. When
the alarm signal occurs, the alarm indicator light, audio and video output switch to the
alarm lift audio and video images, broadcast audio signal automatic access to the
elevator horn transmission cable, transmission to the control terminal connected to a front
modulator for video , alarm, intercom.
When more than one controller is networked, you need to use the elevator alarm
switch is switched out audio and video images and broadcast signals, telephone signals
to switch to each controller.
Tel:+86 592 5901215

Web: www.caimore.com/emain.asp

Xiamen Caimore Communication Technology Co.,Ltd


2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
Contact person: Michelle
E-mail: sales06@caimore.com
Skype: caimoremichelle
Mobile phone: +86-15080025764

---------------------------------------------------------------------------------------------------------- each controller is connected to the audio and video output switcher, audio and video
output to TV wall monitors.
JK1 port connected to a broadcast audio amplifier output. JK2 port received a
telephone signal for elevator maintenance. COM port is connected to each controller's
COM port to each controller output switching signal.
RS485 or RS232 connected to the computer through computer software control
system.

Transmission distance

Audio and video control modulator can choose from CH1, CH2, CH3, CH4, CH5 selected,
the output level of 115dB. Audio and video demodulation module receiving sensitivity
controller to 55dB. Input and output level difference of 60dB.
GB standard SYWV75 and every one hundred meters SYV75 cable attenuation table
According to the above table, the selection of CH5 channel modulator using SYV75-5
cable transmission, per meter loss 8.1dB, in theory, can transfer 740 meters, taking into
account the practical application of the loss of 80%, the least can transmit 590 meters.
Selection of TV cable SYWV75-5, per meter loss 4.6dB, in theory, can transmit 1300
meters, taking into account the loss by 80% of the practical application of computing, it
can transmit 1000 meters.
Computer Management Software
Elevator alarm intercom video linkage system can be used alone or with a perimeter
alarm cell, burglar alarm, access control, video wall management system consisting of an
integrated video linkage.
System can achieve 128 surveillance video linkage points, in addition to the elevator
alarm intercom, can also achieve perimeter alarm, burglar alarm, access control video
linkage, with a unified management software to manage.
In the video alarm linkage control system, each elevator controller can control eight
Tel:+86 592 5901215

Web: www.caimore.com/emain.asp

Xiamen Caimore Communication Technology Co.,Ltd


2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
Contact person: Michelle
E-mail: sales06@caimore.com
Skype: caimoremichelle
Mobile phone: +86-15080025764

----------------------------------------------------------------------------------------------------------elevators. System can connect up to 16 controllers. When the elevator staff pressed the
alarm button, audio and video monitor will automatically switch to the elevator alarm
images, sounds overheard the elevator, select the "Relay 1" on broadcast signal,
intercom. Radio amplifier audio input connections on your computer audio output port
connected to the computer with a microphone for dialogue.
In addition to implementation of elevator video intercom alarm, but also can realize the
video perimeter alarm linkage, video access control linkage. JK1 signal from the "Relay 1"
control, JK2 signal from the "Relay 2" control, JK3 signal from the "Relay 3" control. JK1 ~
JK4 can take 0 ~ 120V broadcast signals, telephone signals, RS485 signal, 0 ~ 12V
power supply to achieve different needs.
Integrated monitoring system management platform, including video alarm linkage control
system and video wall control system. Integrated video linkage control system basically
meet the main needs of security, the various subsystems may standalone application or
can be integrated in one. It is compatible with existing alarm detectors, access control
equipment, hard disk recorders and other equipment, to enhance the effectiveness of
security and reduce the cost of the system, it is suitable for the transformation of the new
system and the old system.

System installation and construction of the applicable conditions and precautions

Video linkage system uses coaxial cable transmission of video surveillance system based
on the old system suitable for renovation and new systems. According to the system in
practical engineering for the new system and the transformation of the system note the
following.

New Systems
New system transmission cable to be used SYWV75 cable TV, good cheap transmission.
Its other main feature is the cable joint use of F connectors, no field welding, easy on-site
Tel:+86 592 5901215

Web: www.caimore.com/emain.asp

Xiamen Caimore Communication Technology Co.,Ltd


2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
Contact person: Michelle
E-mail: sales06@caimore.com
Skype: caimoremichelle
Mobile phone: +86-15080025764

----------------------------------------------------------------------------------------------------------construction.
Since the transmission characteristics of high frequency and low frequency signals are
not the same as the requirements for construction operations, handling the cable
connector, do not have too many connectors. If the construction of the processing of
non-standard connector cable operation, connectors too, tend to be the main reason
causing image quality problems.

Original old system renovation project

The monitoring system has been built usually adopts SYV75 video cable, the
transformation into a video linkage system does not require re-laying cable, but the need
for laying cables to the original carefully tested to ensure the successful completion of the
renovation project.

Appeared in Beijing to undertake the transformation of the old system in liberal arts
Xiyuan problem is the cable connector. Found irregularities in the construction of the
cable connector too, some connector soaked in water, these problems caused by video
images to be ineffective, the RF signal greater impact.

Conclusion

What is the real security needs and to achieve the purpose of one "prevention", advanced
and reliable security facilities can effectively prevent the occurrence of accidents;?
Second, in the event of an accident can make timely and accurate judgments and take
effective measures to correct, prevent significant losses; third can quickly and accurately
find relevant video and audio video data after accidents, to provide accurate and effective
information to the authorities.
Integrated video linkage system is based on the original monitoring technology, the video,
Tel:+86 592 5901215

Web: www.caimore.com/emain.asp

Xiamen Caimore Communication Technology Co.,Ltd


2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
Contact person: Michelle
E-mail: sales06@caimore.com
Skype: caimoremichelle
Mobile phone: +86-15080025764

----------------------------------------------------------------------------------------------------------audio, alarm, control, independent system TV wall management integrated in one, full use
of the resources of the existing stand-alone systems, to enhance the effectiveness of
security precautions.
In the video surveillance systems and alarm intercom system into one elevator
undoubtedly enhance security, but in the future elevator security systems also need to be
able to lift operating data transmission, remote control. With the elevator safety
requirements are high, set video surveillance, alarm intercom, operating data
transmission and remote control of the elevator security system will meet the increasing
needs of users.

Tel:+86 592 5901215

Web: www.caimore.com/emain.asp

You might also like