Professional Documents
Culture Documents
Project
Student:
Teacher:
TEODORESCU Dorin
Conf. dr.ing. MUNTEA Cornel
Group 3031/b
2013-2014
Summary:
1.The objectives
The project refers to thermal instalations part: heating with iron radiators for
a house situated on Cluj-Napoca, Constantin Brancusi street. This is based on an
architecture plan with ground floor and first floor.
2.Calculus
All the calculus are made in conformity with SR 1901-1.
It has been determined the construction elements: walls, windows, doors;
which are exposed with the exterior. For each of the construction elements it has
been determined some characteristics: Orientation(NV,NE,SE,SV), Area(A),
Thermal resistance(Ro), Thermal massiveness(m), Correction heat energy
coefficient(Cm) and Temperature difference( T)
The thermal resistances are:
-exterior walls 2,44m2 k/W
-windows 0,43m2 k/W
-exterior doors 0,43m2 k/W
The correction corection heat energy coefficient is 1 for all elements.
Temperatures:
Interior:
-18C for kitchen, hallways, stairs hall
-20C for bedrooms
-22C for bathrooms
Exterior: -18C
In the secon phase, it was considered the entire rooms. For each room it had
been determined the total area At(walls+floor+ceiling).Taking into consideration the
orientation of each room, the orientation adjustment coefficient A0 was considered.
Then the total heat losses through heat transfer for each room QT had been calculated
Typecode
CE
Draft
Forced
Burning chamber
Sealed
92.7%
93.7%
10 / 23.7 KW
10.9 / 25.49 KW
20 mbar
35 mbar
30-37 mbar
Supply voltage
230 VAC, 50 Hz
160 W
Weight
40 Kg
1l
Piping
Minimum and maximum pressure allowed in the heating
circuit
0.5 to 3 bar
40 - 80 C
30 - 60 C
13.5 l/min
9.7 l/min
7.5 l/min
Nipples:
In - out heating
In - out warm water
Gas supply
"
"
"