Professional Documents
Culture Documents
, LTD
2N6027
Preliminary
SCR
PROGRAMMABLE
UNIJUNCTION TRANSISTOR
DESCRIPTION
1
TO-92
FEATURES
SYMBOL
ORDERING INFORMATION
Note:
Ordering Number
Lead Free
Halogen Free
2N6027L-T92-B
2N6027G-T92-B
Pin Assignment: A: Anode, G: Gate, K: Cathode
www.unisonic.com.tw
Copyright 2013 Unisonic Technologies Co., Ltd
Package
TO-92
Pin Assignment
1
2
3
A
G
K
Packing
Tape Box
1 of 3
QW-R301-022.a
2N6027
Preliminary
SCR
RATINGS
UNIT
300
mW
* Power Dissipation
Derate Above 25C
4.0
mW/C
150
mA
* DC Forward Anode Current
IT
Derate Above 25C
2.67
mA/C
* DC Gate Current
IG
50
mA
100s Pulse Width, 1% Duty Cycle
1.0
Amps
Repetitive Peak Forward
ITRM
Current
* 20 ms Pulse Width, 1% Duty Cycle
2.0
Amps
NonRepetitive Peak Forward Current 10 ms Pulse Width
ITSM
5.0
Amps
* Gate to Cathode Forward Voltage
VGKF
40
Volts
* Gate to Cathode Reverse Voltage
VGKR
-5.0
Volts
* Gate to Anode Reverse Voltage
VGAR
40
Volts
* Anode to Cathode Voltage (Note 1)
VAK
40
Volts
Operating Junction Temperature Range
TJ
50 to +100
C
* Storage Temperature Range
TSTG
55 to +150
C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
* Indicates JEDEC Registered Data.
1. Anode positive, RGA=1000ohms
Anode negative, RGA=open.
SYMBOL
PF
1/JA
THERMAL CHARACTERISTICS
PARAMETER
Junction to Case
Junction to Ambient
Maximum Lead Temperature for Soldering Purposes
(<1/16 from case, 10 secs max)
SYMBOL
JC
JA
RATINGS
75
200
UNIT
C/W
C/W
TL
260
SYMBOL
IP
VT
TEST CONDITIONS
VS=10Vdc, RG=1M
VS=10Vdc, RG=10kohms
VS=10Vdc, RG=1M
VS=10Vdc, RG=1M
Valley Current (Note 2)
IV
VS=10Vdc, RG=10kohms
VS=10Vdc, RG=200ohms
VS=40Vdc, TA=25C, Cathode Open
Gate to Anode Leakage
IGAO
Current (Note 2)
VS=40Vdc, TA=75C, Cathode Open)
VS= 40Vdc, Anode to Cathode
Gate to Cathode Leakage
IGKS
Current
Shorted
Forward Voltage (Note 1, 2)
VF
IF=50mA Peak
Peak Output Voltage (Note 2)
VO
VG=20Vdc, CC=0.2F
Pulse Voltage Rise Time
tr
VB=20Vdc, CC=0.2F
Notes: 1. Pulse Test: Pulse Width300sec, Duty Cycle2%.
2. Indicates JEDEC Registered Data.
MIN
0.2
70
1.5
60
TYP
1.25
4.0
0.70
MAX
2.0
5.0
1.6
UNIT
A
A
Volts
18
150
50
1.0
3.0
10
A
A
mA
nAdc
nAdc
5.0
50
nAdc
0.8
11
40
1.5
Volts
Volt
ns
80
2 of 3
QW-R301-022.a
2N6027
Preliminary
SCR
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
3 of 3
QW-R301-022.a