You are on page 1of 15

GP6 Series Serial(RS232/422/485) Fiber Optical Modem

User

Manual

Guangdong Global Telecommunication Technology CO.,Ltd.


Date

2009.11.03

GP6 Series Serial Fiber Optical Modem User Manual

To users:
Thank you for using our products. Before using, please read this Reference
Manual carefully, and keep properly.

Alarm
1. This product can not be caught in or be affected with damp, for they can make
the performance degressive and even broken..
2. Before fixing this product, please check the model and according to the Users
Reference Manual.

Guangdong Global Telecommunication Technology Co., Ltd.


-------------------------------------------------------------------------Website http://www.cantongt.com

Your best and reliable Supplier and Partner of IT Solution

GP6 Series Serial Fiber Optical Modem User Manual

Table of Contents
1. GENERAL INFORMATION ............................................................................................. 4
1.1 FUNCTIONS ............................................................................................................... 4
1.2 FEATURES ................................................................................................................. 4
1.3 PARAMETER AND SPECIFICATIONS .............................................................................. 4
1.4 DIMENSION ............................................................................................................... 5
1.5 OPERATION ENVIRONMENT ........................................................................................ 5
1.6 PACKAGE .................................................................................................................. 5
2. INSTALLATION .............................................................................................................. 6
2.1 FRONT PANEL ............................................................................................................ 6
2.1.1 Indicator LED .................................................................................................... 6
2.1.2 Test buttons........................................................................................................ 7
2.2 BACK PANEL ............................................................................................................. 9
2.2.1 Power supply ..................................................................................................... 9
2.2.2 Fiber port ........................................................................................................... 9
2.2.3 RS232/RS485/ RS422 port ................................................................................ 9
2.2.4 Serial port setting ............................................................................................. 11
3. PROCEDURE OF INSTALLATION .............................................................................. 12
4. TROUBLE SHOOTING .................................................................................................. 12
5. TYPICAL APPLICATION .............................................................................................. 14

Guangdong Global Telecommunication Technology Co., Ltd.


-------------------------------------------------------------------------Website http://www.cantongt.com

Your best and reliable Supplier and Partner of IT Solution

GP6 Series Serial Fiber Optical Modem User Manual

Guangdong Global Telecommunication Technology Co., Ltd.


-------------------------------------------------------------------------Website http://www.cantongt.com

Your best and reliable Supplier and Partner of IT Solution

GP6 Series Serial Fiber Optical Modem User Manual

1. General Information
1.1 Functions
This Fiber Modem realize transmission of 4 channels RS232/422/485 on single mode fiber. This kind of
product has solved the problem of contradiction between communication distance and communication
rate of traditional serial port. At the same time, it also has solved the problem of electromagnetic
interference, earth link disturbance and thunder/lightning destruction, thus greatly enhancing reliability,
security and privacy of data communication.

It can be widely used in various kinds of situations such as

control, process control and transportation control, and especially suited in bank, electric power as well as
departments and systems which have special request to the electromagnetic interference environment.

1.2 Features
 Based on self copyright IC.

 RS232/485/422 interface can be optional by dip switch.


 Serial port supports 0-57600bps auto-negotiation.
 Combination of PDH technology and digital lock loop clock technology.
 Unique serial port for circuit protection, supporting hot-plugging.
 Data transmission is stable and reliable with integrated light-receiving and transmitting module.

 Complete surface paste and install craft, grade design, and production-runs with piece-pasting
machine.

1.3 Parameter and Specifications


Optical interface:
Wavelength: single-mode 1310nm/1550nm/multi-mode for option
Fiber core number: double core/single core for option
Sending consumption-9dBm/-5dBm
Transmitting range: 0-50km/120km for option
Receiving sensitivity <-36dBm (BER <10-11)
Optical codeCMI
ConnectorSC/FC
Guangdong Global Telecommunication Technology Co., Ltd.
-------------------------------------------------------------------------Website http://www.cantongt.com

Your best and reliable Supplier and Partner of IT Solution

GP6 Series Serial Fiber Optical Modem User Manual

RS232 interface:
Rateasynchronous mode, 057600bps auto-negotiation
Characteristicsatisfies ITU-T V.24 V.11 standard
ConnectorRJ45
Connection type: DCE

1.4 Dimension
Desktop: 212W138D30Hmm

1.5 Operation Environment


VoltageAC90V ~ 260VDC 48VDC +24V
Consumption5W
Operating temperature0C~50C
Storing temperature-40C~+70C
Relative humidity 95 %
No causticity and solvent, dust free, and no strong magnetic interference.

1.6 Package
Contents in the box are shown as follows:
4*RS232 Fiber Modem----------------------------------------------------

Users manual--------------------------------------------------------------

Guangdong Global Telecommunication Technology Co., Ltd.


-------------------------------------------------------------------------Website http://www.cantongt.com

Your best and reliable Supplier and Partner of IT Solution

GP6 Series Serial Fiber Optical Modem User Manual

2. Installation
2.1 Front panel

Figure 1.
Front panel

2.1.1 Indicator LED


Function of 14 indicator LEDs on front panel are shown as follows:
Name

1-4

5-8

Color

Yellow

Status
ON
Fast
wink
Slow
wink
OFF

Yellow

LOS

Red

LOF

Red

TEST

Yellow

PTOK

Green

PWR

Green

ON
OFF
ON
OFF
ON
OFF
ON
OFF
Wink
ON
OFF

Description
Channel1-4 RS232/485/422 data transmitting & receiving
Channel1-4 RS232/485/422 data receiving but no transmitting
Channel1-4 RS232/485/422 data transmitting but no receiving
No data transmitting & receiving
Reserved for no use
Optical signal lost
Optical signal normal
Optical signal loss of synchronization
Optical signal synchronization normal
On test mode(when any of ANA,DIG,REM,PATT pressed)
On normal mode
Pseudo-random code test normal when PATT pressed
Pseudo-random code test defeated when PATT pressed
Pseudo-random code test error when PATT pressed
Power on
Power off

Guangdong Global Telecommunication Technology Co., Ltd.


-------------------------------------------------------------------------Website http://www.cantongt.com

Your best and reliable Supplier and Partner of IT Solution

GP6 Series Serial Fiber Optical Modem User Manual

2.1.2 Test buttons


There are four buttons on the front panel, as follows from the left to right:


ANA: self loop in local fiber interfaceused to check whether local device and its connecting line
work normal.

 DIG: self loop in local RS232/485/422 interface, used to check the remote device and optical wire.

 REM: command remote RS232/485/422 loop

 PATTPBRS Code testing. To produce and transmit the PBRS to the E1 output port, and check
whether the input signal of E1 match that PBRS standard. If match, the PTOK light on, otherwise,
off. By this way, the status of the fiber circuit can be tested.

Process

REV & CHK

circuit

Loop 1

RS port

FIB

FIB

PBRS Code

Loop 2

When testing, the one of above loop back must be on

Guangdong Global Telecommunication Technology Co., Ltd.


-------------------------------------------------------------------------Website http://www.cantongt.com

Your best and reliable Supplier and Partner of IT Solution

GP6 Series Serial Fiber Optical Modem User Manual

When loop circuit 1 is on, confirming of local device working well is available; loop circuit 1 off and
loop circuit 2 on, confirming fiber transmission line and both devices work well is available.

Note:
The function for the combination of button switch:
A)

Local ANA+ local PATT (when both buttons pressed at the same time)
PBRS code test local device, if PTOK on, means ok; if off or flick, it means failure.

B)

Remote DIG + local PATT (when both buttons pressed at the same time)
PBRS code test local, remote device and fiber, if PTOK on, means ok; if off or flick, it means
local device failure.

C)

Local REM + local PATT (when both buttons pressed at the same time)
PBRS code test local, remote device and fiber, if PTOK on, means ok; if off or flick, it means
local device failure.

 Push down any switch on front panel will terminate the normal communication, and turn into the
test mode.
 During the PATT model testing, there should be loop-line, otherwise the PATT code cant come
back.

Guangdong Global Telecommunication Technology Co., Ltd.


-------------------------------------------------------------------------Website http://www.cantongt.com

Your best and reliable Supplier and Partner of IT Solution

GP6 Series Serial Fiber Optical Modem User Manual

2.2 Back panel

Figure2. Rear panel

2.2.1 Power supply




5V power socket: input AC90V~AC260V power adaptorinside positive and outside negative;

AC90V~-AC260V power socket: input AC90V~260V power supply.

110V power socket: input AC110V power supply

2.2.2 Fiber port

There is fiber port on the rear panel, SC/FC for option when oreered.

TX: output
RX: input

2.2.3 RS232/RS485/ RS422 port


There are 4 RJ45 sockets on the rear panel:
1: channel 1-2 RS232 interface;
3: reserved for no use;

2: channel 3-4 RS232 interface;


4: reserved for no use

The pin definition is as follows:

Guangdong Global Telecommunication Technology Co., Ltd.


-------------------------------------------------------------------------Website http://www.cantongt.com

Your best and reliable Supplier and Partner of IT Solution

GP6 Series Serial Fiber Optical Modem User Manual

Figure 3. RS232/RS485/RS422 port pin definition

Guangdong Global Telecommunication Technology Co., Ltd.


-------------------------------------------------------------------------Website http://www.cantongt.com

Your best and reliable Supplier and Partner of IT Solution

GP6 Series Serial Fiber Optical Modem User Manual

2.2.4 Serial port setting


There is DIP-8 switch on the rear panel and the definition is as follows:

Clock setting (DIP1-2):


DIP 1-2

Description
Optic channel inner clock (default), Master
OFF(upward)OFF(upward)
mode
ON(downward)
Optic channel line-in clock, slave mode
ON(downward)

Data type setting (DIP5-8):


DIP
5
6
7
8

Status
OFF(upward)
ON(downward)
OFF(upward)
ON(downward)
OFF(upward)
ON(downward)
OFF(upward)
ON(downward)

Description
Channel 1-2 set to RS232/RS422(default)
Channel 1-2 set to RS485
Channel 3-4 set to RS232/RS422(default)
Channel 3-4 set to RS485
Channel 5-6 set to RS232/RS422(default)
Channel 5-6 set to RS485
Channel 7-8 set to RS232/RS422(default)
Channel 7-8 set to RS485

Guangdong Global Telecommunication Technology Co., Ltd.


-------------------------------------------------------------------------Website http://www.cantongt.com

Your best and reliable Supplier and Partner of IT Solution

GP6 Series Serial Fiber Optical Modem User Manual

3. Procedure of Installation
* Unpack, inspect the content carefully. Verify that all items are included within your carton. Contact us or
local agent if there is any content missing or damaged.
* Check power supply configuration. Care about the value of voltage if using DC input.
* Take following tests before usage:
A. Connect RX and TX optical interface of one device with pigtail, LNK light should be ON.
B. Connect RX-TX, TX-RX optical interface of two devices with pigtails, both LNK lights of two
devices should be ON.
If device does not work well, please contact us or our local agent in time.

4. Trouble shooting
serial
1

Symptom
LOS on

Possible Problem
Optical signal loss

Possible Solutions
Check the optical signal, fiber connector

Guangdong Global Telecommunication Technology Co., Ltd.


-------------------------------------------------------------------------Website http://www.cantongt.com

Your best and reliable Supplier and Partner of IT Solution

GP6 Series Serial Fiber Optical Modem User Manual

on RX terminal

clean or not, fiber break or not, opposite


device power on or off. Loop back the fiber
input and output connectors with the fiber
connecting. The light off means the device
work well, then please check the opposite
device and fiber.

LOS off, while


the LOF on

Optical signal frame


not in-phase

The optical connector clean or not; the input


optical signal exceed the receiving sensitivity
of this device or not; the input optical signal
from the correct source or not(check the
connecting on the fiber assort frame
especially)

the light work

maybe the

Press the PATT and REM buttons,(or

correctly, but

problem lies in the

make the opposite device loop back the

no data

fiber transmission

RS232/485/422 data), if the PTOK light

channel

off, it means the fiber transmission


channel have problem.

All the LED


normal ,but loss
of data

Fiber channel may


have problem

Press REM and PATT (or tell remote terminal


to loop back local terminal), if PTOK is OFF,
then the fiber channel have problem.

If push down PATT, PTOK is OFF, then push down ANA, PTOK is ON, then the device
work normally

If push down PATT, PTOK is OFF, then push down REM or push down DIG on the
remote device, PTOK is ON, then both devices and fiber channel are work normally.

Guangdong Global Telecommunication Technology Co., Ltd.


-------------------------------------------------------------------------Website http://www.cantongt.com

Your best and reliable Supplier and Partner of IT Solution

GP6 Series Serial Fiber Optical Modem User Manual

5. Typical Application

Figure 4 Typical Application

Guangdong Global Telecommunication Technology Co., Ltd.


-------------------------------------------------------------------------Website http://www.cantongt.com

Your best and reliable Supplier and Partner of IT Solution

You might also like