(1.2 miles) and is software selectable. The unit can be programmed to assign data automatically from the data port into consecutive timeslots or the user can assign timeslots manually. Multiple clock source selection Multiple clock source selection ensures maximum flexibility. Timing for the E1 main link and sublink may come from the recovered receive clock, an internal oscillator or the data port. The unit interconnects with RAD's modular DXC products and E1 equipment from other vendors, to support multilink star applications, such as access to SDH networks, FCD and Megaplex units.
Serial, E1 and Ethernet multiplexer
The FCD-E1Es Ethernet interface allows LAN-toLAN connectivity over TDM.
Rate and interface converter for serial
access to E1 services
One serial data port (V.35, V.36, RS-530,
X.21) with selectable sync data rates of n x 64 kpbs
Optional sub-E1 drop-and-insert port,
including bypass support
Optional 10/100BaseT Ethernet bridge
Optional VLAN support
User-friendly LCD panel with
pushbuttons for management
Inband management with SNMP agent
The products 10/100BaseT interface supports
VLAN frames, auto-negotiation and automatic learning and aging. It transparently connects FCD-E1E to remote LANs over E1 links. It filters Ethernet frames and forwards only frames that are destined for the WAN. FCD-E1E supports VLAN tagging and priority labeling according to 802.1p&q. Enhanced QoS supports strict/weighted fair queue mechanism, with 802.1p/DSCP/IP Precedence priority. Standards compliant The E1 interface is compatible with carrierprovided E1 services. The product complies with ITU recommendations G.703, G.704, G.706, G.732, G.823, and G.826. Management The FCE-E1E features an LCD front panel for menu-driven management using three pushbuttons. Front panel LEDs indicate power, alarms and diagnostic loopback operation. Rear panel LEDs on the E1 interfaces indicate local and remote sync loss. Status and diagnostic information is defined,
N TUS
Offering a wide range of serial interfaces (V.35,
V.36, RS-530, X.21) with selectable sync data rates of n x 64 kpbs, data port rates are selectable for any multiple of 64 kbps up to 1,984 kbps. Unframed E1 can be supported up to 2.048 Mbps.
Ethernet extension
TD M
The FCD-E1E is a multiplexer and rate and
interface converter for point-to-point extension of serial data, Ethernet and E1 services or fractional E1 over SDH/SONET networks.
For latest updates visit www.rad.com
configured, and monitored using any of the following methods: Menu-driven management using the front panel LCD with three pushbuttons ASCII terminal connected to the async control port Telnet RADView element manager FCD-E1E is a compact standalone unit. A rack mount adapter kit enables installation of one or two (side-by-side) units in a 19-inch rack.
Point-to-point Ethernet, data and fractional E1 over E1