Professional Documents
Culture Documents
UN CARRIL
VELOCIDAD
KM/H
15
20
30
40
50
60
80
100
125
150
200
300
400
500
20
3.2
2.50
1.50
1.20
1.00
0.8
0
0.6
0
0.50
0.40
0.40
0.30
0.20
0.20
0.20
30
2.50
1.70
1.30
1.00
0.9
0
0.7
0
0.60
0.50
0.40
0.30
0.20
0.20
0.20
20
30
50
60
80
100
125
150
6%
6%
5%
5%
4%
4%
3%
3%
3%
BasicLane
SHARE
LIKE (0)
Attachment
The attachment point is at the inside edge of lane on finish grade.
Input Parameters
Note: All dimensions are in meters or feet unless otherwise noted. All slopes are in
run-over-rise form (for example, 4 : 1) unless indicated as a percent slope with a
% sign.
Parameter
Description
Type
Side
Left / Right
Width
Numeric, positive
3
1
Depth
Numeric, positive
0
0
%Slope
Numeric
-2
Target Parameters
This section lists the parameters in this subassembly that can be mapped to one or
more target objects. For more information, see in the AutoCAD Civil 3D Users
Guide Help.
Target Parameters: None.
Output Parameters
Parameter
Description
Type
Side
Left / Right
Width
Numeric, po
Depth
Numeric, po
%Slope
Numeric
Behavior
The subassembly builds a finish grade and subbase surface, closed by vertical
links at either end. The lane is inserted outward from the attachment point for the
given width, depth, and slope.
Codes
Description
P1
Crown
P2
ETW
P3
Crown_Subbase
P4
ETW_Subbase
Edge-of-traveled-way on subbase
L1
Top, Pave
L3
Datum, Subbase
Subbase
S1
Pave1
Coding Diagram
ShoulderExtendAll
SHARE
LIKE (1)
This subassembly inserts a paved shoulder with all pavement, base, and subbase
layers extended to the shoulder daylight slope.
Attachment
The attachment point is at the inside edge of the paved shoulder, which is typically
at the outside edge-of-traveled way.
Input Parameters
Note: All dimensions are in meters or feet unless otherwise noted. All slopes are in
run-over-rise form (for example, 4 : 1) unless indicated as a percent slope with a
% sign.
Parameter
Description
Type
Daylight Elevation
Numeric
Daylight Offset
Numeric
Daylight Slope
The value of the fixed slope of the daylight link, used if the hold
slope option is used.
Numeric, positive
Side
Left/Right
Shoulder Width
The value of the fixed width of the daylight link, used if the hold
width option is used.
Numeric, positive
Selection List:
Shoulder Slope
Direction
Shoulder % Slope
Left
Outside
Shoulder
Left
Inside
Shoulder
Right
Inside
Shoulder
Right
Outside
Shoulder
No
Selection List:
Away
from Crown
Towards
Crown
Numeric
Parameter
Description
Type
Selection list: a)
Hold Slope,
Adjust Width, b)
Hold Width,
Adjust Slope
Daylight Slope
The value of the fixed slope of the daylight link, used if the hold
slope option is used.
Numeric, positive
Daylight Width
The value of the fixed width of the daylight link, used if the hold
width option is used.
Numeric, positive
Superelevate Subbase
Subbase % Slope
Numeric
Pave 1 Depth
Numeric, nonnegative
Pave 2 Depth
Numeric, nonnegative
Base Depth
Numeric, nonnegative
Subbase Depth
Numeric, non-
Parameter
Description
Type
negative
Target Parameters
This section lists the parameters in this subassembly that can be mapped to one or
more target objects, such as a surface, alignment, or profile object in a drawing. For
more information, see in the AutoCAD Civil 3D Users Guide Help.
Parameter
Shoulder Width
Type of Assignment
May be used to override the fixed Shoulder Width and tie the edge-ofshoulder to an offset alignment. The following object types can be used as
targets for specifying this offset: alignments, polylines, features lines, or
survey figures.
Status
Optional
Output Parameters
Parameter
Description
Type
Daylight Slope
Numeric
Daylight Offset
Numeric
Daylight Elevation
Numeric
Numeric
Numeric
Shoulder Width
Shoulder Slope
Behavior
The finish grade of the shoulder is inserted for the given Shoulder Width and
Default Shoulder Slope outward from the attachment point. The subbase link is
inserted from the attachment point starting at the Subbase Depth below the finish
grade.
The shoulder daylight link can be inserted with either a fixed slope (Hold Daylight
Slope = True), or a fixed width (Hold Daylight Slope = False). If a fixed slope is
used, the daylight link is extended from the outside edge of the shoulder until it
intersects the subbase link. Otherwise, the subbase layer is extended for the
Daylight Width beyond the outside edge of the shoulder, and the daylight link is
connected to the end of the subbase.
The Pave1, Pave2, and Base surface links are inserted parallel to the finish grade
at the given depths until they intersect with the shoulder daylight link.
Type
Code
Description
P2
EPS
P4
EPS_Pave1
P6
EPS_Pave2
P8
EPS_Base
P10
Daylight_Sub
Type
Code
Description
L1
Top, Pave
L3
Pave
L4
Pave1
L6
Pave1
L7
Pave2
L9
Pave2
Top of Pavement2
Top of Pavement2
Top of Pavement3
Top of Pavement3
Base
Top of the base course
L12
Base
Bottom of subbase, datum
L13
Subbase, Datum
Slope_Link
L14
S1
Pave1
S2
Pave2
Type
Code
S3
Base
S4
Subbase
Description
Note:
L14 is the new link connecting P2-P10 or P2-P8 or P2-P6 or P2-P4, depending on
which is the lowest link.
Coding Diagram
YesNo
endienteTaludCunetaDesmonteBsica
COMPARTIR
ME GUSTA (0)
Enlace
El punto de enlace se encuentra en el borde interior del talud interior de cuneta en
caso de desmonte, y en el borde interior del vnculo de interseccin en caso de
terrapln.
Parmetros de entrada
Nota: todas las dimensiones se ofrecen en metros o en pies a menos que se
indique lo contrario. Todos los taludes se expresan como recorrido por altura (por
ejemplo, 4:1), a menos que se indiquen como un porcentaje de talud mediante el
signo %.
Parmetro
Descripcin
Tipo
Lado
Izquierda / Derecha
Vnculo de interseccin
Incluir / Omitir
In
Parmetro
Descripcin
Tipo
Talud en desmonte
Numrico, positivo
Talud en terrapln
Numrico, positivo
Numrico, positivo
Numrico, positivo
Anchura inferior
Numrico, positivo
Numrico, positivo
Numrico, positivo
Opcin de redondeo
Cadena
Redondear por
Cadena
Parmetro de redondeo
Numrico, positivo
Parmetro
Descripcin
Tipo
Triangulacin de redondeo
Numrico, positivo
Talud
Numrico, positivo
Cadena
R
ta
Talud
Numrico, positivo
Cadena
R
ta
Talud
Parmetro
Descripcin
Tipo
Numrico, positivo
Cadena
Parmetros de objetivo
Esta seccin muestra los parmetros de este subensamblaje que se pueden
asignar a uno o a varios objetos de destino. Para obtener ms informacin,
consulte en la Ayuda del Manual del usuario de AutoCAD Civil 3D.
Parmetro
Superficie de interseccin
Descripcin
Parmetros de salida
Ninguno.
Comportamiento
El punto de enlace se comprueba para determinar si est en desmonte o terrapln.
Si est en terrapln, el vnculo de interseccin en terrapln se extiende hasta la
superficie de interseccin con el talud en terrapln indicado. En caso de desmonte,
se aaden el talud interior, el exterior y la parte inferior de la cuneta, mientras que
el vnculo de interseccin en desmonte se extiende desde el extremo del talud
exterior de cuneta hasta la superficie de interseccin con el talud en desmonte
indicado.
Esta
Oblig
P1
Cdigos
Hinge
Descripcin
Hinge_Fill
P2
Ditch_In
Daylight
Daylight_Fill
P3
Ditch_Out
Cdigos
Descripcin
P4
Hinge_Cut
P5
Daylight
Daylight_Cut
L1 - L4
Top
Datum
L1
Top
Datum
Daylight
Daylight_Fill
L4
Top
Datum
Daylight
Daylight_Cut
Diagrama de codificacin