Professional Documents
Culture Documents
OCMOS FET
PS7122A-1C,PS7122AL-1C
8-PIN DIP, 250 V BREAK DOWN VOLTAGE
TRANSFER TYPE
2-ch Optical Coupled MOS FET
NEPOC Series
DESCRIPTION
The PS7122A-1C and PS7122AL-1C are transfer type solid state relays containing normally open (N.O.) contact
and normally close (N.C.) contact on the output side.
They are suitable for analog signal control because of their low offset and high linearity.
The PS7122AL-1C has a surface mount type lead.
FEATURES
2 channel type (1 a + 1 b output)
Low LED operating current (IF = 2 mA)
Designed for AC/DC switching line changer
Small package (8-pin DIP)
Low offset voltage
Ordering number of taping product: PS7122AL-1C-E3, E4: 1 000 pcs/reel
<R>
Pb-Free product
<R>
Safety standards
UL approved: File No. E72422
BSI approved: No. 8245/8246
CSA approved: No. CA 101391
APPLICATIONS
Exchange equipment
Measurement equipment
FA/OA equipment
1997, 2006
PS7122A-1C,PS7122AL-1C
PACKAGE DIMENSIONS (in millimeters)
PS7122A-1C
9.250.5
TOP VIEW
8
1. LED Anode
2. LED Cathode
3. LED Anode
4. LED Cathode
5. MOS FET (N.O.)
6. MOS FET (N.O.)
7. MOS FET (N.C.)
8. MOS FET (N.C.)
7.62
3.30.3
3.50.3
4.150.3
6.50.5
0 to 15
0.50.1
1.340.1
0.25 M
2.54
PS7122AL-1C
9.250.5
TOP VIEW
8
1. LED Anode
2. LED Cathode
3. LED Anode
4. LED Cathode
5. MOS FET (N.O.)
6. MOS FET (N.O.)
7. MOS FET (N.C.)
8. MOS FET (N.C.)
3.50.3
0.10+0.10
0.05
6.50.5
1.340.1
0.25 M
0.90.25
2.54
9.600.4
PS7122A-1C,PS7122AL-1C
<R>
MARKING EXAMPLE
No. 1 pin
Mark
PS7122A-1C
NL601
Country Assembled
Type Number
Assembly Lot
N L 6 01
Week Assembled
Year Assembled
(Last 1 Digit)
In-house Code
(L: Pb-Free)
Rank Code
PS7122A-1C,PS7122AL-1C
<R>
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Packing Style
Safety Standard
Application Part
Approval
Number
Specification
PS7122A-1C
PS7122A-1C-A
Pb-Free
PS7122AL-1C
PS7122AL-1C-A
PS7122AL-1C-E3
PS7122AL-1C-E3-A
PS7122AL-1C-E4
PS7122AL-1C-E4-A
*1 For the application of the Safety Standard, following part number should be used.
Symbol
Ratings
Unit
IF
50
mA/ch
Reverse Voltage
VR
5.0
Power Dissipation
PD
50
mW/ch
IFP
A/ch
VL
250
IL
200
mA/ch
ILP
400
mA/ch
PD
375
mW/ch
BV
1 500
Vr.m.s.
PT
850
mW
TA
40 to +85
Storage Temperature
Tstg
40 to +100
Diode
*1
*2
(AC/DC Connection)
Power Dissipation
Isolation Voltage
*3
Symbol
MIN.
TYP.
MAX.
Unit
IF
10
20
mA
VF
0.5
*1
PS7122A-1C,PS7122AL-1C
ELECTRICAL CHARACTERISTICS (TA = 25C)
Parameter
Diode
MOS FET
Symbol
Conditions
Forward Voltage
VF
IF = 10 mA
Reverse Current
IR
VR = 5 V
ILoff
MIN.
TYP.
MAX.
Unit
1.2
1.4
5.0
1.0
0.03
Coupled
Cout
N.O.: VD = 0 V, f = 1 MHz
120
340
pF/ch
IFon
N.O.: IL = 200 mA
2.0
mA
IFoff
N.C.: IL = 200 mA
2.0
mA
On-state Resistance
Ron1
N.O.: IF = 10 mA, IL = 10 mA
4.5
8.0
ms
N.C.: IF = 0 mA, IL = 10 mA
Ron2
Turn-on Time
Turn-off Time
*1, 2
*1, 2
ton (N.O.)
IF = 10 mA, VO = 5 V, RL = 500 ,
0.5
1.5
ton (N.C.)
PW 10 ms
0.04
0.2
0.04
0.2
0.5
1.5
toff (N.O.)
toff (N.C.)
Isolation Resistance
RI-O
Isolation Capacitance
CI-O
V = 0 V, f = 1 MHz
10
1.1
pF/ch
PS7122A-1C,PS7122AL-1C
*1 Test Circuit for Switching Time
IF
Pulse Input
VL
Input monitor
VO monitor
Rin
RL
50 %
Input
Input
50 %
VO = 5 V
90 %
Output
VO = 5 V
90 %
Output
10 %
ton
toff
10 %
toff
ton
*2 The turn-on time and turn-off time are specified as input-pulse width 10 ms.
<R>
Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off
time will increase.
PS7122A-1C,PS7122AL-1C
TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified)
MAXIMUM FORWARD CURRENT vs.
AMBIENT TEMPERATURE
100
80
60
40
20
0
25
25
50
7585
200
100
0
25
100
25
75 85
50
1.6
100
400
IF = 50 mA
30 mA
20 mA
10 mA
5 mA
1.2
1.0
1 mA
0.8
25
25
50
75
300
200
N.C.
N.O.
100
100
20
40
60
80
100
120
105
Off-state Leakage Current ILoff (A)
1.4
IF = 0 mA (N.O.)
IF = 10 mA (N.C.)
106
200
Load Current IL (mA)
f = 1 MHz
TA = 85 C
N.O., N.C.
107
25 C
N.O., N.C.
108
100
2.0
1.0
1.0
2.0
100
200
109
0
50
100
150
200
250
Load Voltage VL (V)
PS7122A-1C,PS7122AL-1C
TURN-ON TIME vs. FORWARD CURRENT
12
12
N.O.
8
6
4
8
6
4
2
N.O.
N.C.
0
10
15
25
30
15
20
25
30
Normalized to 1.0
at TA = 25 C,
IF = 10 mA, VO = 5 V
2.0
N.O.
1.5
N.C.
1.0
0.5
0.0
25
25
50
100
75
3.0
1.5
0.5
0.0
25
2.0
N.O.
N.C.
1.0
0.5
25
50
75
25
50
75
Normalized to 1.0
at TA = 25 C,
IF = 10 mA, IL = 10 mA (N.O.),
IF = 0 mA, IL = 10 mA (N.C.)
N.O.
1.0
3.0
1.5
N.C.
2.0
2.5
Normalized to 1.0
at TA = 25 C,
IF = 10 mA, VO = 5 V
2.5
10
2.5
0.0
25
20
3.0
100
VO = 5 V
10
Turn-off Time toff (ms)
10
N.C.
VO = 5 V
100
PS7122A-1C,PS7122AL-1C
ON-STATE RESISTANCE (N.O.)
DISTRIBUTION
30
n = 50 pcs,
IF = 10 mA,
IL = 10 mA
20
25
Number (pcs)
Number (pcs)
25
15
10
4.3
4.4
4.5
10
4.3
4.4
4.5
4.7
4.6
n = 50 pcs,
IF = 10 mA,
VO = 5 V
25
20
15
10
20
15
10
5
5
0
n = 50 pcs,
IF = 10 mA,
VO = 5 V
25
Number (pcs)
Number (pcs)
15
4.7
4.6
30
0.4
0
0.03
0.6
0.04
0.05
0.06
30
n = 50 pcs,
IF = 10 mA,
VO = 5 V
25
20
15
10
20
15
10
5
5
0
n = 50 pcs,
IF = 10 mA,
VO = 5 V
25
Number (pcs)
Number (pcs)
20
5
0
n = 50 pcs,
IF = 0 mA,
IL = 10 mA
0
0.04
0.05
0.4
0.6
PS7122A-1C,PS7122AL-1C
TAPING SPECIFICATIONS (in millimeters)
4.5 MAX.
10.30.1
7.50.1
1.5 +0.1
0
16.00.3
2.00.1
4.00.1
1.750.1
4.00.1
10.40.1
1.550.1
12.00.1
0.3
Tape Direction
PS7122AL-1C-E3
PS7122AL-1C-E4
R 1.0
21.00.8
1001.0
3302.0
2.00.5
13.00.2
17.51.0
21.51.0
10
15.9 to 19.4
Outer edge of
flange
PS7122A-1C,PS7122AL-1C
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
Peak reflow temperature
10 seconds or less
60 seconds or less
12030 s
Number of reflows
Three
Flux
(heating)
to 10 s
260C MAX.
220C
to 60 s
180C
120C
12030 s
(preheating)
Time (s)
Time
10 seconds or less
Preheating conditions
Number of times
One
Flux
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
<R>
350C or below
3 seconds or less
Flux
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100C.
(4) Cautions
Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
Data Sheet PN10275EJ02V0DS
11
PS7122A-1C,PS7122AL-1C
<R>
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
12
PS7122A-1C,PS7122AL-1C
The information in this document is current as of July, 2006. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or
data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all
products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
13
PS7122A-1C,PS7122AL-1C
Caution
GaAs Products
0604