Professional Documents
Culture Documents
0
Version: 1
Total Pages: 26
Date: 2004-February-27
AU OPTRONICS CORPORATION
Product Specifications
15.0 XGA Color TFT-LCD Module
Model Name:
M150XN07
V.1
Approved by
Prepared by
CC Chiu
Gary Chen
Customer
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
1/26
Product Specifications
15.0 XGA Color TFT-LCD Module
Model Name:M150XN07
V.1
(C) Copyright
) Preliminary Specifications
(u) Final Specifications
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
2/26
i Contents
1.0 Handling Precautions
2.0 General Description
2.1 Display Characteristics
2.2 Functional Block Diagram
11.0 Environment
11.1 Temperature and Humidity
11.1.1 Operating Conditions
11.1.2 Shipping Conditions
11.2 Atmospheric Pressure
11.3 Thermal Shock
12.0 Reliability
12.1 Failure criteria
12.2 Failure rate
12.2.1 Usage
12.2.2 Components de-rating
12.3 CCFL life
12.4 ON/OFF cycle
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
3/26
13.0 Safety
13.1 Sharp edge requirement
13.2 Material
13.2.1 Toxicity
13.2.2 Flammability
13.3 Capacitors
13.4 Hazardous voltage
15.0 Label
16.0 Mechanical Characteristics
ii Record of Revision
Version and Date Page
0.1 2003/06/10
All
0.2 2003/09/15
06
10
10
18
18
19
19
0.3 2003/09/23
1.0 2004/02/27
(C) Copyright
Min= 2.5 mA
Typ= 1.0 A, Max= 1.3 A
Typ= 3.3 W, Max= 4.3 W
Update
Update
Update
Min= 1100 V
Update
Min= 1450 V
Update
Outline dimension:
326.5 x 253.5 x 12.0 (Typ.)
All
Update
Update
06
11
Remark
Max= 3.6 V
15
18
19
24~26
19
0.5 2003/11/24
0.6 2003/12/08
New Description
All
Power Consumption
(VDD line + CCFL line)=12.7W
Power Consumption
(VDD line + CCFL line)=13.3W
Min= 600V (@8.5mA)
CCFL Discharge Voltage
Typ= 620V (@8.0mA)
Typ= 590V, Max= 650V
Max=710V (@2.5mA)
CCFL Power Consumption
Typ= 10W
Typ=9.4W, Max=10.4W
Max=11W
Viewing Angle CR = 5,
Min=45
Vertical(Upper), Min=60, Typ=70 Typ=50
5.7.1 Timing Characteristics
8.0 Power ON/OFF Sequence
VCFL Min= 600V(@8.5mA)
VCFL Min= N/A
16.0 Mechanical Characteristics
06
19
0.4 2003/11/10
Old description
First Edition for Customer
Power Consumption
(VDD line + CCFL line)=15 W
Input Voltage of Signal
Max= VDD+0.3 V
CCFL Current Min= 3.0 mA
LCD Driver Current
LCD Driver Power consumption
CCFL Ignition Voltage (25)
Min= 1000V
CCFL Ignition Voltage ( 0)
Min= 1300V
Power Consumption
(VDD line + CCFL line)=12.7 W
Update
Update
Update
Update
Update
Update
Update
Update
Update
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
4/26
1.0
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
Handling Precautions
Since front polarizer is easily damaged, pay attention not to scratch it.
Be sure to turn off power supply when inserting or disconnecting from input connector.
Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
Since CMOS LSI is used in this module, take care of static electricity and insure human earth when
handling.
Do not open nor modify the Module Assembly.
Do not press the reflector sheet at the back of the module to any directions.
In case if a Module has to be put back into the packing container slot after once it was taken out from the
container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CFL
Reflector edge softly. Otherwise the TFT Module may be damaged.
At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT Module.
After installation of the TFT Module into an enclosure (LCD monitor housing, for example), do not twist nor
bend the TFT Module even momentary. At designing the enclosure, it should be taken into consideration
that no bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module
may be damaged.
Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local ordinances or
regulations for disposal.
Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be
supplied by power complied with requirements of Limited Power Source (2.11, IEC60950 or UL1950), or be
applied exemption.
The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit (2.4, IEC60950 or
UL1950). Do not connect the CFL in Hazardous Voltage Circuit.
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
5/26
2.0
General Description
This specification applies to the 15.0 inch Color TFT-LCD Module M150XN07.
The display supports the XGA (1024(H) x 768(V)) screen format and 262,144 colors (RGB 6-bits data).
All input signals are 1 Channel LVDS interface compatible.
This module does not contain an inverter card for backlight.
Features
-XGA 1024(H) x 768(V) resolution
-2 CCFLs (Cold cathode Fluorescent Lamp)
-High contrast ratio, high aperture ratio
-Wide viewing angle
-High-speed response
-Low power consumption
Application
Desktop monitors
Unit
[mm]
[mm]
[mm]
[mm]
[cd/m2]
White-x
White-y
Color Gamut
Viewing angle
Response Time
Nominal Input Voltage VDD
Power Consumption
(VDD line + CCFL line)
Electrical Interface
Frame rate
Weight
Mounting method
Surface treatment
Temperature Range
Operating
Storage (Shipping)
(C) Copyright
[msec]
[Volt]
[Watt]
[Hz]
[Grams]
[ C]
o
[ C]
SPECIFICATIONS
381 (15)
326.5 (Typ.) x 253.5 (Typ.) x 12.0 (Max.)
304.128 (H) x 228.096(38.1cm diagonal)
1024(R,G,B x 3) x 768
0.297 x 0.297
R.G.B. Vertical Stripe
TN mode, Normally White
250nit (Typ.) @8mA (Note 1)
80% (Typ.) (Note 2)
1.7 (Max.)(Note 3)
1.2% (Max.) (Note 4)
400 : 1 (Typ.)
262,144 colors (6-bit for R,G,B)
0.313
0.329
60% (Typ.), of NTSC coverage
60(left), 60(right), 40(up), 60(down) CR=10
16ms (Typ.) (Tr +Tf)
+3.3 V
13.3 W (Typ.) @8mA (All Black Pattern)
LVDS (1 Ch)
60Hz (Typ.), 75Hz (Max.)
1100 (Typ.)
Side mounting
Anti-glare, hard coating (3H)
0 to +50
-20 to +60
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
6/26
256
512
768
192
1
384
576
Unit: pixels
Note 1: Brightness is measured at the center point of brightness value with all pixels displaying white.
90 %
50 %
10 %
10 %
50 %
90 %
Unit: percentage of dimension of display area
Note 2: Brightness uniformity of these 9 points is defined as below:
(Min. brightness
Note 3: TCO 99 Certification Requirements and test methods for environmental labeling of Display Report No. 2
defines Luminance uniformity as below:
((Lmax,+30deg. / Lmin,+30deg.) + (Lmax,-30deg. / Lmin,-30deg.)) / 2
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
7/26
md
Lmax+30and Lmin+30
Effective areaWH
2) D is the diagonal of the screen in centimeters. And md is as follow.
md(cm)=D1.5 with a minimum distancemd=50 cm
3) The measurement positions shall consist of an active white square of size 4 by 4 cm.
4) Measure Lmax+30and Lmin+30that are given as points L & R. And then rotated to an azimuth angle of 30
degrees and measure Lmax-30and Lmin-30again using
Note 4:
1/2
1/6
2/3
1/6
1/2
1/3
1/6
1/6
1/3
1/2
1/2
32 gray level
2/3
32 gray level
0 gray level
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
8/26
AU ASIC
G1
LVDS
Connector
+ 3.3 V
TFT-LCD
1024*(3)*768
Pixels
Y-Driver IC
Timing
Controller
LVDS
Receiver
RSDS
Transmitter
X-Driver IC
G768
D1
D3072
2 CCFL
DC/DC
Gamma
Converter
Correction
DC POWER
DF-14H-20P-1.25H (Hirose)
CWY20G-A0D1T (PTWO)
(C) Copyright
Inverter
JST BHR-03VS-1
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
9/26
Symbol
Min
Max
Unit
VDD
-0.3
+3.6
[Volt]
Vin
-0.3
+3.6
[Volt]
CCFL Current
ICFL
2.5
8.5
[mA] rms
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Vibration
Shock
TOP
HOP
TST
HST
0
20
-20
5
-
+50
85
+60
95
1.5 / 10-200
50/20
[oC]
[%RH]
[oC]
[%RH]
[G / Hz]
[G / ms]
Conditions
Note 1
Note 2
Note 2
Note 2
Note 2
Half sine wave
Note 1: CCFL life time will drop dramatically if exceeding 8.0 mA; It will have safety concern if exceeding 8.5
mA.
Note 2: Maximum Wet-Bulb should be 39 and No condensation.
Twb=39
T=40,H=95%
100
95
90
80
70
T=50,H=55%
60
50
Storage range
40
T=60,H=39%
Operation range
T=65,H=29%
30
20
Storage range
10
5
0
(C) Copyright
-20
Temperature oC
50
60
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
10/26
Unit
Conditions
Horizontal (Right)
Min.
Typ.
50
60
50
60
Max.
[degree]
CR = 10
(Left)
[degree]
Horizontal
(Right)
60
75
CR =5
Vertical
(Left)
(Upper)
60
75
30
40
[degree]
CR = 10
(Lower)
50
60
[degree]
Vertical
(Upper)
45
50
CR = 5
(Lower)
65
75
Normal Direction
Raising Time Ton
( 10%-90% )
Falling Time Toff
( 90%-10% )
300
400
12
17
Raising + Falling
16
23
Color / Chromaticity
Red x
0.587
0.617
0.647
Coordinates (CIE)
Red y
0.317
0.347
0.377
Green x
0.260
0.290
0.320
Green y
0.563
0.593
0.623
Blue x
0.118
0.148
0.178
Blue y
0.070
0.100
0.130
White x
0.283
0.313
0.343
White y
0.299
0.329
0.359
75
80
200
250
170
200
1.2
Viewing Angle
Contrast ratio
Response Time( Note 1)
[msec]
[msec]
[msec]
Brightness Uniformity
[%]
Crosstalk ( in 60Hz)
[cd/m ]
[%]
TrF
TrR
100
90
Optical
Black
White
Black
response
10
0
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
11/26
These connectors are capable of accommodating the following signals and will be following components
5.2
Connector Name
Interface Connector
Manufacturer
DF-14H-20P-1.25H (Hirose)
CWY20G-A0D1T (PTWO)
Description
VDD
VDD
VSS
Power Ground
VSS
Power Ground
Rin0-
Rin0+
VSS
Power Ground
Rin1-
Rin1+
10
VSS
Power Ground
11
Rin2-
12
Rin2+
13
VSS
Power Ground
14
ClkIN-
15
ClkIN+
16
VSS
Power Ground
17
Rin3-
No Connection
18
Rin3+
No Connection
19
VSS
Power Ground
20
NC
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
12/26
Manufacturer
JST or compatible
BHR-03VS-1
SM02(8.0)B-BHS-1-TB
Description
HV
NC
No connection
LV
Ground
Symbol
Min
Typ
Max
Unit
VDD
+3.0
+3.3
+3.6
[V]
Vih
2.0
[V]
Vil
0.8
[V]
LCD Drive
voltage
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
13/26
Vdiff=0V
R0IN0
G0
R5
R4
R3
R2
R1
R0
B1
B0
G5
G4
G3
G2
G1
DE
VS
HS
B5
B4
B3
B2
R1IN1
R2IN2
Previous
Next
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
14/26
Condition
Min
Vth
Differential InputHigh
Voltage(Vcm=+1.2V)
Vtl
-100
Max
Unit
+100
[mV]
[mV]
Vsync Timing
Parameter
Clock frequency
Horizontal active
Horizontal blanking
Horizontal period
Vertical active
Vertical blanking
Vertical period
Symbol
clk
Thd
Thbl
Th
Tvd
Tvbl
Tv
MIN
50
1024
30
1054
768
8
776
TYP
65
1024
320
1344
768
38
806
MAX
81
1024
1024
2048
768
256
1024
Unit
MHz
Tclk
Tclk
Tck
Th
Th
Th
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
15/26
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
16/26
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
17/26
Parameter
Min
Typ
Max
Unit
Condition
VDD
3.0
3.3
3.6
[V]
IDD
1.0
1.2
[A]
PDD
3.3
[Watt]
VDDns
Allowable
LCD Drive Ripple
Noise
100
[mV]
p-p
90%
90%
10%
Vin
10%
10%
0V
T1 T2
T5 T6
T7
Signal
0V
T4
T3
Lamp
0V
Symbol
(C) Copyright
Values
Unit
Min
Typ
Max
T1
0.5
10
[ms]
T2
0.5
25
50
[ms]
T3
200
[ms]
T4
100
[ms]
T5
0.5
16
50
[ms]
T6
0.5
10
[ms]
T7
1000
[ms]
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
18/26
signal Name
No connection
Ground
Parameter
Min
Typ
Max
Units
2.5
8.0
8.5
[mA]
rms
20
[mA]
40
55
80
[KHz]
(Ta=25)
Note 1
1100
[Volt]
rms
(Ta=25)
Note 3
1450
[Volt]
rms
(Ta=0)
Note 3
IRCFL
ICFL
FCFL
CCFL Frequency
ViCFL
(25)
(reference)
ViCFL
(0)
(reference)
Condition
(Ta=25)
Note 4
VCFL
620
(@8.0mA)
710
(@2.5mA)
[Volt]
rms
(Ta=25)
Note 2
PCFL
10
11
[Watt]
(Ta=25)
Note 2
Note 1: CCFL Frequency should be carefully determined to avoid interference between inverter and TFT LCD
Note 2: Calculator value for reference (IRCFLVCFLx2=PCFL)
Note 3: CCFL inverter should be able to give out a power that has a generating capacity of over 1450 voltage.
Lamp units need 1450 voltage minimum for ignition
Note 4: CCFL life time 30,000hr at 8.0mA,its defined as when the brightness is reduced by half.
Its recommended not to exceed 8.0 mA for CCFL life time concern and its prohibited to exceed 8.5 mA
for safety concern.
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
19/26
Frequency: 10 - 200Hz
Sweep:
Acceleration:
1.5G(10~200Hz P- P)
Test method:
Acceleration (G)
1.5
Frequency (Hz)
10~200~10
30
Acceleration (G)
50
Active time(ms)
20
Wave form
Half-sin
Times
Direction: X , Y, Z
10.2 Drop
Package test: The drop height is defined as 60 cm.
(1 corner,3 edges,6 flat faces)
-- No damage and defect found for panel.
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
20/26
11.0 Environment
The display module will meet the provision of this specification during operating condition or after storage or
shipment condition specified below. Operation at 10% beyond the specified range will not cause physical
damage to the unit.
Altitude
Maximum Pressure
1040 hPa
0 m = sea level
Minimum Pressure
601 hPa
Note: Non-operation altitude limit of this display module = 40,000 feet. = 12193 m.
Power is not applied during the test. After temperature cycling, the unit is placed in normal room ambient for
at least 4 hours before powering on.
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
21/26
12.0 Reliability
This display module and the packaging of that will comply following standards.
12.2.1 Usage
The assumed usage for the above criteria is:
l 220 power-on hours per month
l 500 power on/off cycles per month
l Maximum brightness setting
l Operation to be within office environment (250C typical)
The assumed CCFL Life will be longer than 30,000 hours under stable condition at 255 0C;
Standard current at 8.0 0.5 mA
Definition of life: brightness becomes 50% or less than the minimum luminance value of CCFL.
Value
Cycle
36,000
13.0 Safety
13.1 Sharp Edge Requirements
There will be no sharp edges or corners on the display assembly that could cause injury.
13.2 Materials
13.2.1 Toxicity
There will be no carcinogenic materials used anywhere in the display module. If toxic materials are used, they
will be reviewed and approved by the responsible AUO Toxicologist.
13.2.2 Flammability
All components including electrical components that do not meet the flammability grade UL94-V1 in the
module will complete the flammability rating exception approval process. The printed circuit board will be
made from material rated 94-V1 or better. The actual UL flammability rating will be printed on the printed
circuit board.
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
22/26
IEC 950
EN 60 950
The construction of the display module is designed to suppress EMI. When mounted into a specified host
system, the system will meet the following EMI requirement:
FCC Part 15 Class B
VCCI Class 2
CISPR 22, class B
Taiwan CNS standard
China CCIB standard
15.0 Label
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
23/26
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
24/26
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
25/26
(C) Copyright
AU Optronics, Inc.
M150XN07 V.1
Ver1.0
26/26