Professional Documents
Culture Documents
The following is a direct comparison between 400W PHILIPS EVOSMART 400W STANDARD MAGNETIC 200/250W GLOGREEN DHID
Philips EvoSmart, Magnetic, and the New GloGreen
DHID Series lighting ballast products for Industry. PULSE START METAL HALIDE METAL HALIDE
Inrush Current < 25A for 1millisecond for 1 Cycle Up to 2X the operating current 12.5A for 1millisecond for 1 Cycle
Hot Restrike Current < Operating Current 2X to 2.5X Operating Current < Operating Current
Sound Ultra Quiet Operation Issues with Acoustic Resonance Noise Noise Free
Lamp Current Crest Factor < 1.5 > 1.6 < 1.5
Lamp Regulation ± 0.5% @ ± 10% Variation in Line Voltage ± 10% @ ± 10% Variation in Line Voltage ± 0.5% @ ± 10% Variation in Line Voltage
Dimming Continuous Dimming or Hi/Lo Hi/Med or Hi/Lo 4 Digital Dimming Modes Available
Ignition Process Computer-Controlled Digital Ignition High-Voltage Pulse Ignition Process Direct Digital Ignition
* Direct comparison is based on 400W Philips EvoSmart Pulse Start; Standard 400W Metal Halide; Vs. Accendo's retrofit/replacement recommended 200/250W DHID ballast operated in the 250W setting (ballast selectable between 200W and 250W).
GloGreen 200/250W DHID Retrofit Ballast and Fixture Solutions Retrofit/Replace 400W magnetic for 40%-50%+ Savings
Accendo GloGreen DHID 200/250W Ballast Powered Highbay Fixture solutions are 97% efficient and offer an immediate 40%-50%+ Energy Savings over 400W magnetic HID solutions.
DHID lighting delivers more energy efficiency, higher-performance, longer lasting light quality and guaranteed reduced maintenance and bulb costs for Industry's shortest return on lighting
investment. MH, CMH and HPS bulbs operated by GloGreen Dgital HID ballasts now last 40,000 hours and beyond; relamping is no longer required since the originally specified light quality
and penetration will never visibly decline (no more than 5% degradation over the entire life of the bulb for 95% lumen maintenance). Since the bulb's brightness will not decrease
over time, the GloGreen 200W or 250W solution can meet the project requirements with equal light levels, but at 50% less energy and operating costs.
GloGreen Digital HID lighting is the most environmentally and economically responsible solution over inefficient and lower performance electronic HID, LED, fluorescent and induction;
offering a lower initial buying cost, better light quality, application flexibility and extremely low maintenance/consumable costs incurred over the long term.
Please do not hesitate to contact us today to discuss your energy and money saving opportunity.