Professional Documents
Culture Documents
The “Green” Benefits of Envelop Covers ENVELOP Covers Repair Kit Now Available
Today’s increased awareness for environmental protec- ENVELOP Protective Covers are designed to survive the
tion has led to green solutions; but often, acting responsibly on most unforgiving environments and harshest treatment. However,
that awareness has led to higher costs for business. That is why sometimes even rugged ENVELOP covers can succumb to the most
it is especially gratifying when new technology provides not severe conditions, or be inadvertently damaged. Over the past several
only solutions that are beneficial to the environment, but also months Shield Technologies has worked to develop a repair kit that
provide higher sustainability for the equipment we use – and can remedy many of these rare problems and extend the lifespan of an
therefore cost savings. Shield Technologies’ products are a lead- ENVELOP Cover.
ing example of technology that excels in both areas. The repair kit includes all of the necessary materials to patch
ENVELOP Protective Covers achieve this positive out- cuts and holes of a wide variety of sizes. The patches are bonded with
come in several ways. Cleaning old lubricants and corrosion off a waterproof adhesive that can easily be applied with a common iron.
a piece of equipment creates hazardous and environmentally The adhesive forms a rigid bond between the patch and cover that can
unfriendly wastes. Disposing of oil and grease soaked rags, overcome the kinds of environmental degradation infrequently found
used desiccants, and used plastic wraps all contribute to the haz- on ENVELOP Covers after extended periods of use.
ardous materials that a command or a company must dispose of.
The new repair kit also addresses other parts of an ENVELOP
By using ENVELOP Protective Covers you can reduce the
Protective Cover that might require mending. Upon request Shield
amount of hazardous waste generated from these items. It will
Technologies can provide the following items as integral components
also reduce the amount of materials that are sent to landfills.
to the kit: 1”webbing, 5/8” webbing, grommets, 1” buckles, 5/8”
ENVELOP Covers will also help with reducing the
periodicity of equipment maintenance cycles, and the various
buckles, slide locks, barrel locks, D-rings, gutter hooks, and “Remove
lubricants and preservatives applied over time. The reduced use Before Flight” flags.
of pressurized spray cans and various paint solvents is another The repair kit is designed to maximize the lifespan of
positive way to protect the atmosphere. Lower maintenance and ENVELOP Covers so that they can continue to protect sensitive
HAZMAT disposal fees will also result for an organization that equipment,, decrease maintenance man-hours, and increase mission
reduces its use of hazardous maintenance materials. readiness. The kits can be procured by contacting a Shield
Technologies sales team representative.
NAVSEA Outfits Four ENVELOP Protective Covers
Surface Combatants as Pilot Reach a Fixed-Wing Aircraft
Project Milestone
Shield Technologies Corporation During the month of September 2009,
has been awarded a contract from the U.S. the U.S. Navy procured 11 complete sets of
Navy to outfit four combatant ships with E/A-18 Growler aircraft covers for the Naval
complete sets of Envelop Protective Covers. Air Station (NAS) Whidbey Island-based
USS NICHOLAS (FFG-47), USS electronic attack squadron VAQ-129. The
RAMAGE (DDG-61), USS JAMES E. Boeing Integrated Defense Systems
WILLIAMS (DDG-95) and USS LEYTE Corporation’s E/A-18 Growler is the nation’s
GULF (CG-55) are all being outfitted with newest and most technologically advanced
Envelop Protective Covers as the key piece electronic warfare aircraft in the world.
of a topside corrosion prevention initiative. ENVELOP Protective Covers were chosen by
SEA-21 is the sponsoring activity for the VAQ-129 due to the diverse environmental
initiative. degradation protection that the covers provide,
The goal of the project is to as well as the end-user custom design choices
demonstrate to the INSURV board a cost offered by Shield Technologies.
effective solution as part of the broader The U.S. Navy recently introduced
the Growler aircraft to NAS Whidbey Island
corrosion prevention program administered
and began a phased transition from the aging
by the U.S. Navy’s surface fleet. Each of EA-6B Prowler aircraft to the Growler. The
the ships being outfitted will undergo IN- Navy’s decision to put ENVELOP protective
SURV inspections within the next 12 covers on the initial set guarantees VAQ-129 a
months. As always, Shield Technologies significant reduction in overall maintenance
representatives will be present for all hours expended, as well as corrosion related
deliveries to provide training and maintenance costs. A complete set of F/A-18
protective covers includes customized color
information on care and use of these
and lettering for the left and right engine
technologically advanced corrosion intake and exhaust covers, and a unique
preventive covers. They will also work in aircraft canopy protective cover which
close coordination with SEA-21, the ship provides aircraft internal thermal protection
class squadrons, and the ships’ companies from extreme temperature spikes.
themselves throughout the initiative to The E/A-18 contract represents
ensure that the proposed solution can another significant milestone for Shield
achieve maximum results for combat Technologies, which is increasingly recog-
readiness. nized by the naval aviation community as the
leading choice for superior protective covers.
ENVELOP Protects
Stabilators for Special
Operations Aviation
Regiment (SOAR)