Professional Documents
Culture Documents
Name
: MANIKANDAN.D
Address
: 2/522A, Pillaiyar Kovil Street,
: Boo.Manaveli,Boothavarayanpet Post,
: Chidambaram Taluck, Cuddalore Dist,
: Pin-608 601
Mobile
: +91 9159538960
E-Mail
: kandaa708@gmail.com
SUMMARY OF EXPERIENCE
Graduated in Diploma Mechanical Engineering, specialized in Quality control activities and
having more than 7 years of experience in NDT inspector in various companies those involved
in fabrication of plant, pipeline and Auto motive spears for Oil & Gas industries, Refinery,
Petrochemical Plant, and Power Plant etc.
With an extensive experience in carrying out quality control inspection looking for a
position of a Quality control engineer with 7 years of experience performing on manufacturing
filed all over India and Overseas
EDUCATION
2000
WORKING EXPERIENCE
Period
Company
Designation
Client
Duties
PROFILE - 2
Period
Company
Designation
Client
Duties
Lamination checking plates & laminar tear UT inspection at cutting pipe edge.
Conducting in UT on gas pipeline, structural beams, crane beams, and conveyers
measurement with UT machine to evaluate the piping integrity.
Conducted UT for thickness gauging of vessel, Boiler tubes& tanks, etc.
The NDT Method used are ultrasonic testing with shear wave and compression wave for
detection and wall thickness
Magnetic testing with of AC&DC yoke technique with color and fluorescent particles
Equipment handled
Ultrasonic Testing: Ex 10, Scan 140 (Sonasite), USM 35X, USM 25, ModSonic(Galileo) and
UT-G Thickness Gauge etc.,
Positive material Identification test: Niton xlt & Inovex
Liquid Penetrant Testing: Visible Dye Penetrant, Magnaflux,
Magnetic Particle Testing: Magnaflux, A/C-D/C Yoke, prod. and Magnetic Particle Machine
,AM-Meter, KAT-Meter, used to AC/DC Current
Radiography Testing: Gamma rid Tech opds, Rolli (India) AMERTEST-660, Delta - 880.
Draw
PROFILE 3
Period
Company
Designation
Duties
Monitor the Welder performance and conduct visual inspections of welds and repairs of
welds in accordance with Company procedures and international codes of practice.
Check, inspect and test incoming welding and construction materials to ensure they
meet project specification requirements.
Monitor the construction process from all aspects to ensure performance meets job
quality and design requirements in accordance with Company procedures and
international standards.
Identify and prepare Welding Procedure Specification (WPS) & PQR for jobs as per
project specifications and verify Welders meet PQR requirements.
Collate all relevant documentation for the job and apply the data to the creation of a Test
Pack to undertake pre-hydro test inspection activity.
Conduct fit up and dimension inspections as per Inspection and Test Plan (ITP) and to
provide technical guidance for welding sequence and distortion control.
.
PROFILE - 4
Period
Company
Designation
: QC Inspector
Duties
Studying the drawing and Monitors the Project activities and requirements in accordance
with ITP or QAP/QC plan.
Familiar with Material planning and Cutting Plan / Layout preparation.
Randomly Inspect filler materials and check its documents, to ensure that the proper
electrodes are in accordance with the approved welding procedures. Check the typical
certified material test report (C.M.T.R.) when purchased, the proper storage, and the system
on controlling and distributing the electrodes.
Monitoring and inspecting the prefabrication works by the contractors including the
inspection of incoming materials, material handling, heat number transfer, Fit-up, welding
activities, Post weld heat treatment (PWHT) of welding joints, hardness test, PMI (Positive
material identification), reinforced pad test and Orientation.
Witnessing and monitoring the required NDE has been covered as per the project
specification. Monitoring the QA/QC Documentation of the contractors and ensure that all
the activities are incorporated to their system on daily basis and can be traced according to
our requirements.
Monitoring and inspecting the erection works by the contractors including piping, welding
and insulation and also co-ordination with contractors for the quality issues and issuing
NCRs when non-conformity activities were noted by the contractors.
Ensure that pipe supports, hangers and guides have been installed in accordance with the
piping drawings and the pipe support details.
PERSONAL DETAILS
Fathers Name
: Mr. N.Duraisamy
Dob
: 13/04/1976.
Sex
: Male.
Nationality
: Indian.
Marital Status
: Married.
Passport No
Languages Known
: English, Tamil,