Professional Documents
Culture Documents
Issue
02
Date
2013-09-30
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the customer.
All or part of the products, services and features described in this document may not be within the purchase scope or
the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this
document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or
implied.
The information in this document is subject to change without notice. Every effort has been made in the preparation
of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this
document do not constitute a warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
Issue 02 (2013-09-30)
WRFUe Description
Contents
Contents
1 Introduction ..................................................................................................................................... 3
1.1 Appearance ....................................................................................................................................................... 3
1.2 Physical Ports ................................................................................................................................................... 4
Issue 02 (2013-09-30)
ii
WRFUe Description
1 Introduction
Introduction
The WCDMA Radio Filter Unit (WRFUe) is an indoor RF unit and is the RF module of the
macro NodeB. The WRFUe is used for the BTS3900, BTS3900A, BTS3900L, and
BTS3900AL cabinets.
1.1 Appearance
Figure 1-1 shows a WRFUe.
Figure 1-1 WRFUe
Issue 02 (2013-09-30)
WRFUe Description
1 Introduction
Connector
Quantity
Function
3V3 power
connector
RF port
DIN female
connector
CPRI port
SFP female
connector
Interconnection port
for RF RX signals
Issue 02 (2013-09-30)
QMA female
connector
WRFUe Description
1 Introduction
Port
Connector
Quantity
Function
Monitoring port
RJ45 connector
Issue 02 (2013-09-30)
WRFUe Description
2 Technical Specifications
Technical Specifications
2100
1920 to 1980
2110 to 2170
2.2 Capacity
Table 2-2 WRFUe Capacity
Configuration
Capacity
Non-MIMO Configurations
MIMO Configurations
Hybrid Configurations
1-Way Receiver
Sensitivity (dBm)
2-Way Receiver
Sensitivity (dBm)
4-Way Receiver
Sensitivity (dBm)
2100
126.1
128.9
131.6
Issue 02 (2013-09-30)
WRFUe Description
2 Technical Specifications
As recommended in 3GPP TS 25.104, is measured in the entire operating band at the antenna connector
on the condition that the channel rate is 12.2 kbit/s and the BER is not higher than 0.001.
The WRFUe supports one TX channel, MIMO, and combination of one TX channel and MIMO.
One WRFUe supports six carriers in non-MIMO configuration, and supports four carriers in
MIMO configuration, its output power at the antenna connector reaches 2 x 80 W.
Table 2-4 Non-MIMO WRFUe output power
Number of PA1
Carriers
Number of PA2
Carriers
80
40
26
20
80
40
26
40 + 40
40 + 40
26 + 26
20 + 20
Issue 02 (2013-09-30)
WRFUe Description
2 Technical Specifications
In hybrid configurations, each TX channel supports a maximum of four carriers, with maximum
output power of 80 W.
The typical power consumption is measured with the equipment 40% loaded at a temperature of
25C.
The maximum power consumption is measured with the equipment 100% loaded at a temperature of
25C.
In the 3x1 or 3x2 configuration, one WBBPf3 and one UMPTb1 are configured.
In the 3x3 or 3x4 configuration, two WBBPf3 units and one UMPTb1 are configured.
Output
Power
per
Carrier
(W)
Typical
power
consumption
(W)
Maximum
power
consumption
(W)
92Ah
184Ah
3x1
20
495
570
4.1
8.7
17.8
3x2
20
570
705
3.6
7.5
15.4
3x3
20
730
925
2.6
5.5
12.1
3x4
20
865
1135
2.1
4.3
10.2
Output
Power
per
Carrier
(W)
Typical
power
consumption
(W)
Maximum
power
consumption
(W)
92Ah
184Ah
3x1
20
525
600
3.9
8.2
16.8
3x2
20
600
735
3.4
6.9
14.7
3x3
20
760
955
2.5
5.1
11.6
3x4
20
895
1165
2.0
4.2
9.6
Issue 02 (2013-09-30)
WRFUe Description
2 Technical Specifications
Output
Power
per
Carrier
(W)
Typical
power
consumption
(W)
Maximum
power
consumption
(W)
92Ah
184Ah
3x1
20
525
600
3.9
8.2
16.8
3x2
20
600
735
3.4
6.9
14.7
3x3
20
760
955
2.5
5.1
11.6
3x4
20
895
1165
2.0
4.2
9.6
Output
Power
per
Carrier
(W)
Typical
power
consumption
(W)
Maximum
power
consumption
(W)
92Ah
184Ah
3x1
20
540
615
3.8
8.0
16.3
3x2
20
615
750
3.2
6.8
14.3
3x3
20
775
970
2.4
5.0
11.4
3x4
20
910
1180
2.0
4.1
9.5
Specification
Topology
Star
Issue 02 (2013-09-30)
10
WRFUe Description
2 Technical Specifications
Item
Specification
Cascading capability
Specifications
Dimensions (H x W x
D)
Weight
12 kg
Issue 02 (2013-09-30)
11
WRFUe Description
Issue 02 (2013-09-30)
Acronym and
Abbreviation
Full Name
BBU
BER
WRFUe
WBBP
WMPT
PA
Power Amplifier
13