You are on page 1of 8

Configuration1- 2+2+2, FSME (1/3)

BTS configuration and traffic requirements:


2+2+2; HSPA at all cells 6 HSPA cells 1x HSDPA scheduler (240 user)
HSUPA:
o 5.76 Mbps per cell
o 5.76 x 6= 34.56 Mbps
o TTI = 2 ms F-DPCH = True
o 1x HSUPA scheduler considered it support 240 users
o Considered HSUPA Interference Cancellation (PIC) at every cell* 1 SU
126 Mbps DL (21Mbps per cell: 64QAM ); DC-HSDPA
LCG
f1

DC-HSDPA

Baseband capacity requirement:


HSUPA: 34.56 Mbps
10.75 SU
HSUPA 240 user
PIC: 6 cells 1SU
HSDPA: 126 Mbps 3.25
10.75 + 1+ 3.25 =15

DC-HSDPA: all cells of a DC sector need to be in the


same LCG and handled by the same scheduler

Total resources required:


15 SU

f2

Fig. 1 Cells grouping to LCG


LCG
FSM

Fig. 2 System Module with one LCG

FSME capacity (6 cells):


18 SU
Total BB capacity available for DCH/A-DCH/HSUPA traffic for dynamic
use from BB resources after HSPA allocation:
18 SU 15 SU = 3 SU
3 SU x 48 R99CE = 144 R99CE available

Configuration1 (2/3)
2+2+2, FSME
Subunits_for_HSDPA = Max {Round up ((2 * MIMO cells + non-MIMO cells) / 6) + 1 ;
Subunits_for_HSDPA_throughput } + number of LCGs * 0.25
where:
Subunits_for_HSDPA_throughput: number of subunits from Table
Number_of_LCGs: number of LCGs covering System Module Rel.2 baseband capacity

HSDPA requirement: 126Mbps / 6 non_MIMO cells


Subunits_for_HSDPA = Max {Round up ((2 * 0 + 6) / 6) + 1 ; 3
?}+1
? ** 0.25
0.25 == 3.25
? SU

Configuration1 (3/3)
2+2+2, FSME HSUPA 34.56Mbps, 240 users

Configuration2- 3+3+3,
FSME+FSME (1/3)
BTS configuration and traffic requirements:
3+3+3; HSPA at all cells 9 HSPA cells
HSDPA
LCG1 2+2+2 -126Mbps (1 HSDPA Scheduler)
LCG2 1+1+1 63Mbps(1 HSDPA Scheduler)
HSUPA:
o 5.76 Mbps per cell
o 5.76 x 6= 34.56 Mbps
o LCG1 2+2+2 -34.56Mbps (240 Users for LCG1)
o LCG2 1+1+1 17.28 Mbps (240 Users for LCG2)
o TTI = 2 ms F-DPCH = True
o Considered HSUPA Interference Cancellation (PIC) at every cell

Baseband capacity requirement:


HSUPA: 34.56 Mbps
10.75 SU (FSME_1)
HSPA: 240 users
HSUPA: 17.28 Mbps
8 SU (FSME_2)
HSPA: 240 users
PIC: 6 cells 1 SU (FSME_1)
PIC: 3 cells 1 SU (FSME_2)
HSDPA: 126 Mbps (3.25 SU) (FSME_1)
HSDPA: 63 Mbps (2.25 SU) (FSME_2)
----------------------------10.75 + 8 + 1 + 1 + 3.25 + 2.25 = 26.25 SU

Total resources required:


26.25 SU
FSME capacity (9 cells):
18 + 18SU
Total BB capacity available for DCH/ADCH/HSUPA traffic for dynamic use from
BB resources after HSPA allocation:
36 SU 26.25SU = 9.75 SU
9.75 SU x 48 R99CE = 468 R99CE
available

Configuration2 (2/3)
2+2+2, FSME_1 & 1+1+1 with FSME_2
Subunits_for_HSDPA = Max {Round up ((2 * MIMO cells + non-MIMO cells) / 6) + 1 ;
Subunits_for_HSDPA_throughput } + number of LCGs * 0.25
where:
Subunits_for_HSDPA_throughput: number of subunits from Table
Number_of_LCGs: number of LCGs covering System Module Rel.2 baseband capacity

HSDPA requirement: 126Mbps / 6 non_MIMO cells


Subunits_for_HSDPA = Max {Round up ((2 * 0 + 6) / 6) + 1 ; 3
?}+1
? ** 0.25
0.25 == 3.25
? SU
HSDPA requirement: 126Mbps / 3 non_MIMO cells
Subunits_for_HSDPA = Max {Round up ((2 * 0 + 3) / 6) + 1 ; 2 } + 1 * 0.25 = 2.25 SU

Configuration 1 (1/3)
2+2+2, FSMF+FBBA

LCG: Small HSPA configuration


BTS configuration and traffic requirements:
HSUPA: 34.56 Mbps
2+2+2; HSPA at all cells 6 HSPA cells 1x HSDPA scheduler
HSPA: 240 users
5.625 SU
(240 user)
PIC: 6 cells 1 SU
LCG_conf_subunits: 1.125 HSDPA
HSUPA:
126Mbps
o 5.76 Mbps per cell
1.125 + 5.625 + 1 = 7.750 SU
o 5.76 x 6= 34.56 Mbps
o TTI = 2 ms F-DPCH = True
o 1x HSUPA scheduler considered it support 240 users
o Considered HSUPA Interference Cancellation (PIC) at every
cell* 1 SU
Normal HSPA scheduler support 2 xHSDPA scheduler (240users and 252Mbps
126 Mbps DL (21Mbps per cell: 64QAM); DC-HSDPA
and 1 HSUPA scheduler 160 users

How to map LCG(s)


LCG to cells?
f1
f2

Fig. 1 Cells grouping to LCG


LCG

FSM

Fig. 2 System Module with one LCGs

Total resources required:


7.750 SU

FSMF + FBBA capacity:


5.5 SU + 6 SU = 11.5 SU
What is left from BB resources after HSPA allocation:
11.5 SU 7.750 SU = 3.75 SU
3.75 SU x 96 R99CE = 360 R99CE available

Configuration 1(2/3)

LCG Configurations type impact on capacity


LCG_conf_subunits = max {RoundUp (Cells_factor) *0,5 ; Min_LCG_conf_subunits }
LCG_factor + HSPA_factor
Where:
Cells_factor = [ RoundUp(non-MIMO cells/3) + MIMO cells] / 2 for Small, Normal configuration; Cells_factor = 0 for Rel99 only configuration
LCG_factor = 0,5 for 1st LCG; LCG_factor = 0 for each additional LCG;
HSPA_factor = 0,125 for Small, Normal configuration; HSPA_factor = 0 for Rel99 only configuration

1) LCG: 6 non-MIMO cells; Small HSPA configuration; 10km cell range


Cells_factor = [ RoundUp(6/3)+0]
RoundUp(?/3)+?] // 22 == 1?
LCG_conf_subunits = max{RoundUp (1)
(?)*0.5;
* 0.5;?}
1.5}
0.5
0.5
+ 0.125
+ 0.125
= ?=SU
1.5 - 0.5 + 0.125 = 1.125 SU
LCG
configuration

(Min_LCG_conf
_subunits)

Rel99 only

Small

Normal

1,5

Configuration1 (3/3)
2+2+2, FSMF HSUPA 34.56Mbps, 240 users

You might also like