Professional Documents
Culture Documents
* Pre-analytical sample integrity check, cap-piercing technology and up to 180 samples per hour
* Powerful multi-wavelength technology for up to 60 parameters
* Efficient workflow, rapid turnaround and simultaneous random access
* Network connection with online quality control
* Expanded test portfolio
measurement methods: coagulation, chromogenic, immunoassay and aggregation. The systems photo-optical clot
detection means you have several advantages compared to mechanical detection.
* You can measure light transmittance over the entire course of clot formation, not just the end.
* You can identify atypical reaction patterns easily and so determine the correct coagulation reaction result for
your patients with unusual in vitro clot reactions such as sepsis and DIC.
* The clotting reactions display the complete clot signature, not just a single data point, so that you get far more
detailed test information and therefore better clinical utility.
Used on a single platform, the broad range of assays allows high test throughput up to 180 samples per hour.
Design and specifications may be subject to change due to further product development.
Sysmex Europe GmbH, Bornbarch 1, 22848 Norderstedt, Germany, Phone: +49 (40) 527 26 0, Fax: +49 (40) 527 26 100
www.sysmex-europe.com
We have designed the analysers software in such a way that it is easy and intuitive to use, and so have reduced training
requirements too. The enhanced help system, on board as standard, increases availability by showing intelligent
messaging, and if you want you can print a maintenance management checklist and so easily keep track of the
management tasks you still have to perform.
Specifications
Detection principle
multi-wavelength detector for transmitted light at 340, 405, 575, 660 and 800 nm
Detection methods
10 channels for clotting, chromogenic and immunoassays; 4 channels for platelet aggregation
Parameters
up to 60 parameters can be analysed simultaneously
Throughput
up to 180 tests/h
Sampling
rack type auto sampler with cap piercing functionality*, an initial capacity for 10 racks with 10 sample
tubes each, and continuous loading possibility; separate STAT positions
Reagent holder
40 positions cooled at 10 C; 5 positions at room temperature; all positions with positive reagent identification
Reference curves
multi-lot management with max. 10 curves per reagent lot and max. 10 reagent lots per parameter
Quality control
X-bar, Levey-Jennings and Westgard control
750 parameter files with max. 1,200 data points each
Data storage
up to 10,000 samples
Dimensions/weights w x h x d [mm] / [kg]
main unit
approx. 775 x 675 x 865 / 100
pneumatic unit
approx. 280 x 400 x 355 / 17
IPU
approx. 356 x 317 x 129 / 15
Design and specifications may be subject to change due to further product development.
Sysmex Europe GmbH, Bornbarch 1, 22848 Norderstedt, Germany, Phone: +49 (40) 527 26 0, Fax: +49 (40) 527 26 100
www.sysmex-europe.com