Professional Documents
Culture Documents
Film
Fuji makes a film named the FP-100C, which is considerably superior than compatible Polaroid film,
that can be used in the AuraCam 6000. Fortunately since there are still a lot of cameras that use the FP100C film, this film will be available for a long time. On top of that, the advantages of this film over
computer printers and digital cameras are still numerous; the important one being that film is
considerably faster than computer photo printers. The AuraCam 6000 can take a photo every twenty
seconds, while taking much longer for a photo printer to work. In the future we will eventually offer
ways to connect the AuraCam 6000 to a computer photo printer, however. To start looking for the best
prices on Fuji FP-100C film, click here.
Warranty Modules
The Functional Warranty Module Plan, at $2 per photo, is part of the
warranty and upgrade options plan. One-half of the cost of the functional
module keeps the parts and labor warranty in effect, while the other half can
be applied toward upgrading your existing camera or receiving aura related
items, such as back drops, special lighting, books, banners, etc. which we
offer from time to time (ask your staff consultant about what's available).
Money from the Functional Warranty Module is also used for national
publicity to promote your Aura Imaging camera and events.
The AuraCam 6000 Package Consists Of:
1. The AuraCam 6000, with built-in computer hardware and software
2. The software Aura Analyzer, which prints out and analysis of the aura photo.
3. hand sensor (biofeedback measuring device)
4. One 500 unit functional warranty module which counts and prints film usage
5. Power pack
6. Portable carrying case
7. A training video and manual
8. Promotional signs and materials, and
9. Full technical and marketing support.
Added bonus: All software accessories including the Expanded Printout, Interactive and WinAura
programs are included free with the purchase of the AuraCam 6000, over $4,000 in value.
TECHNICAL DATA
Power: 1A - 115 VAC / 0.6A - 230 VAC
Voltage: 85 - 264 VAC
Frequency: 47 - 440 Hz.
Camera Measurements: 250mm x 230mm x 140mm (Height x Breadth x Width)
Hand Sensor Measurements: 180mm x 150mm x 60mm (Height x Breadth x Width)
Camera Weight: 3kg
Hand Sensor Weight: 1kg
Exposition time: 6 seconds
Time of Development per Photo: 60 - 90 sec
Film: Fuji FP-100 C, Polaroid Polacolor 100C
ROM: exchangeable and expandable
Processor: Mask- Micro- Chip
Other Notes: Printout in black-and-white or color via parallel port to any computer printer. Camera is
protected against static electricity.