Catalogo de Rodamientos

For New Technology Network
corporation
Ball and Roller Bearings
CAT. NO.
2202-@/E
Technical Data
A-
Deep Groove Ball Bearings
B-
Miniature and Extra Small Bearings
B- 29
Angular Contact Ball Bearings
B- 41
Self-Aligning Ball Bearings
B- 77
Cylindrical Roller Bearings
B- 89
Tapered Roller Bearings
B-131
Spherical Roller Bearings
B-229
Thrust Bearings
B-265
Locknuts, Lockwashers & Lockplates
C-
Catalog List & Appendix Table
D-
Warranty
NTN warrants, to the original purchaser only, that the delivered product which is the subject of this sale (a)
will conform to drawings and specifications mutually established in writing as applicable to the contract, and (b)
be free from defects in material or fabrication. The duration of this warranty is one year from date of delivery.
If the buyer discovers within this period a failure of the product to conform to drawings or specifications, or a
defect in material or fabrication, it must promptly notify NTN in writing. In no event shall such notification be
received by NTN later than 13 months from the date of delivery. Within a reasonable time after such
notification, NTN will, at its option, (a) correct any failure of the product to conform to drawings, specifications
or any defect in material or workmanship, with either replacement or repair of the product, or (b) refund, in part
or in whole, the purchase price. Such replacement and repair, excluding charges for labor, is at NTN's
expense. All warranty service will be performed at service centers designated by NTN. These remedies are
the purchaser's exclusive remedies for breach of warranty.
NTN does not warrant (a) any product, components or parts not manufactured by NTN, (b) defects caused
by failure to provide a suitable installation environment for the product, (c) damage caused by use of the
product for purposes other than those for which it was designed, (d) damage caused by disasters such as fire,
flood, wind, and lightning, (e) damage caused by unauthorized attachments or modification, (f) damage during
shipment, or (g) any other abuse or misuse by the purchaser.
THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
In no case shall NTN be liable for any special, incidental, or consequential damages based upon breach of
warranty, breach of contract, negligence, strict tort, or any other legal theory,and in no case shall total liability
of NTN exceed the purchase price of the part upon which such liability is based. Such damages include, but
are not limited to, loss of profits, loss of savings or revenue, loss of use of the product or any associated
equipment, cost of capital, cost of any substitute equipment, facilities or services, downtime, the claims of third
parties including customers, and injury to property. Some states do not allow limits on warranties, or on
remedies for breach in certain transactions. In such states, the limits in this paragraph and in paragraph (2)
shall apply to the extent allowable under case law and statutes in such states.
Any action for breach of warranty or any other legal theory must be commenced within 15 months following
delivery of the goods.
Unless modified in a writing signed by both parties, this agreement is understood to be the complete and
exclusive agreement between the parties, superceding all prior agreements, oral or written, and all other
communications between the parties relating to the subject matter of this agreement. No employee of NTN or
any other party is authorized to make any warranty in addition to those made in this agreement.
This agreement allocates the risks of product failure between NTN and the purchaser. This allocation is
recognized by both parties and is reflected in the price of the goods. The purchaser acknowledges that it has
read this agreement, understands it, and is bound by its terms.
NTN Corporation. 2001

Although care has been taken to assure the accuracy of the data compiled in this catalog, NTN does not
assume any liability to any company or person for errors or omissions.
NTN
TECHNICAL DATA CONTENTS
1. Classification and Characteristics

of Rolling Bearings A-5
4.6 Bearing rated life and

load calculation examples A-26
1.1 Rolling bearing construction A-5

1.2 Classification of rolling bearings A-5
5. Boundary Dimensions and

Bearing Number Codes A-28
1.3 Characteristics of rolling bearings A-9
5.1 Boundary dimensions A-28

5.2 Bearing numbers A-29
2. Bearing Selection A-10

2.1 Bearing selection flow chart A-10
2.2 Type and character is tics A-12
6. Bearing Tolerances A-33
2.3 Selection of bearing arrangement A-13
6.1 Dimensional accuracy and

running accuracy A-33
6.2 Chamfer measurements and tolerance
or allowable values of tapered hole A-44
3. Load Rating and Life A-15
6.3 Bearing tolerance measurement

methods A-46
3.1 Bearing lifeA-15

3.2 Basic rated life and basic dynamic
load rating A-15
3.3 Machine applications and requisite life A-16
3.4 Adjusted life rating factor A-16
7. Bearing Fits A-47
3.5 Basic static load ratingA-17
7.1 Interference A-47
3.6 Allowable static equivalent load A-18
7.2 The necessity of a proper fit A-47

7.3 Fit selection A-47
4. Bearing Load Calculation A-19

4.2 Bearing load distribution A-21
8. Bearing Internal Clearance

and Preload A-56
4.3 Mean load A-22
8.1 Bearing internal clearance A-56
4.4 Equivalent load A-23
8.2 Internal clearance selection A-56
4.5 Allowable axial load for cylindrical

roller bearings A-25
8.3 Preload A-64
4.1 Loads acting on shaftsA-19
A-2
9. Allowable Speed A-68
14. Shaft and Housing DesignA-83

14.1 Fixing of bearings A-83
14.2 Bearing fitting dimensionsA-84
10. Friction and

Temperature RiseA-69
14.3 Shaft and housing accuracy A-85

14.4 Allowable bearing misalignment A-85
10.1 Friction A-69

10.2 Temperature riseA-69
15. Bearing Handling A-86

15.1 Bearing storage A-86
11. Lubrication A-70
15.2 Installation A-86
11.1 Lubrication of rolling bearings A-70
15.3 Internal clearance adjustment A-88
11.2 Lubrication methods and

characteristics A-70
15.4 Post installation running testA-90

15.5 Bearing disassembly A-90
11.3 Grease lubrication A-70

11.4 Solid grease
(For bearings with solid grease) A-74
11.5 Oil lubrication A-74
16. Bearing Damage and

Corrective Measures A-93
12. External bearing

sealing devices A-78
17. Technical data A-95

17.1 Deep groove ball bearing radial internal
clearances and axial internal clearances
A-95
13. Bearing Materials A-81
17.2 Angular contact ball bearing axial load and

axial displacement A-95
13.1 Raceway and

rolling element materials A-81
17.3 Tapered roller bearing axial load and

axial displacement A-97
13.2 Cage materialsA-82
17.4 Fitting surface pressureA-98

17.5 Necessary press fit and pullout force A-99
A-3
Classification and Characteristics of Rolling Bearings
1.1 Rolling bearing construction

Most rolling bearings consist of rings with raceway (an
inner ring and an outer ring), rolling elements (either balls
or rollers) and a rolling element retainer. The retainer
separates the rolling elements at regular intervals holds
them in place within the inner and outer raceways, and
allows them to rotate freely. See Figs. 1.1 - 1.8.
Outerring
Inner ring
Cage
Ball
Outer
ring
Inner
ring
Ball
Cage
Rolling elements come in two general shapes: ball or

rollers. Rollers come in four basic styles: cylindrical,
needle, tapered, and spherical.
Balls geometrically contact the raceway surfaces of the
inner and outer rings at "points", while the contact surface
of rollers is a "line" contact.
Theoretically, rolling bearings are so constructed as to
allow the rolling elements to rotate orbitally while also
rotating on their own axes at the same time.
Deep groove ball bearing

Fig 1.1
While the rolling elements and the bearing rings take

any load applied to the bearings (at the contact point
between the rolling elements and raceway surfaces), the
retainer takes no direct load. It only serves to hold the
rolling units at equal distances from each other and
prevent them from falling out.
1.2 Classification of rolling bearings

Rolling bearings fall into two main classifications: ball
bearings and roller bearings. Ball bearings are classified
according to their bearing ring configurations: deep
groove, angular contact and thrust types. Roller bearings
on the other hand are classified according to the shape of
the rollers: cylindrical, needle, taper and spherical.
Rolling bearings can be further classified according to
the direction in which the load is applied; radial bearings
carry radial loads and thrust bearings carry axial loads.
Other classification methods include: 1) number of
rolling rows (single, multiple, or 4-row), 2) separable and
non-separable, in which either the inner ring or the outer
ring can be detached, 3) thrust bearings which can carry
axial loads in only one direction, and double direction
thrust bearings which can carry loads in both directions.
There are also bearings designed for special
applications, such as: railway car journal roller bearings
(RCT bearings), ball screw support bearings, turntable
bearings, as well as rectilinear motion bearings (linear
ball bearings, linear roller bearings and linear flat roller
bearings).
A-5
Angular contact ball bearing

Fig. 1.2
Single row deep groove ball bearings

Single row angular contact ball bearings
Radial ball bearings
Duplex angular contact ball bearings

Double row angular contact ball bearings
Four-point contact ball bearings
Ball bearings
Self-aligning ball bearings

Insert ball bearings
Single direction thrust ball bearings

with flat back face
High-speed duplex angular contact
ball bearings (for axial loads)
Thrust ball bearings
Double direction angular contact

thrust ball bearings
Rolling
bearings
Single row cylindrical roller bearings
Double row cylindrical roller bearings
Needle roller bearings
Radial roller bearings

Single row tapered roller bearings
Double row tapered roller bearings
Spherical roller bearings
Roller bearings
Cylindrical roller thrust bearings
Needle roller thrust bearings
Thrust roller bearings
Tapered roller thrust bearings

Spherical roller thrust bearings
A-6
Ultra thin wall type ball bearings

Turntable bearings
Ball screw support bearings
Railway car journal roller bearings
(RCT bearings)
Ultra-clean vacuum bearings
SL-type cylindrical roller bearings
Special
application
bearings
Rubber molded bearings

Crossed roller thrust bearings
Clearance adjusting needle roller
bearings
Complex bearings
Connecting rod cage-equipped
needle rollers
Yoke type track rollers
Stud type track rollers
Special application bearings are not listed in this catalog.
Linear
motion
bearings
Linear motion bearings are not listed in this catalog
Fig. 1.9 Classification of rolling bearings
A-7
Width
Contact angle
Inner ring
Ball
Inner ring
raceway
Outer ring
raceway
Pitch circle
diameter
Outer ring
Rivet
Bearing bore
diameter
Cage
Inner ring
side face
Shield
Bearing outside diameter
Snap ring
Outer ring,
front face
Outer ring,
back face
Inner ring,
back face
Inner ring,
front face
Effective
load center
Bearing chamfer
Contact angle
Bearing width
Inner ring
with rib
Standout
Outer ring with 2 ribs
Cone front face rib
Tapered roller
Roller inscribed
circle diameter
L-shaped loose rib
Cone back face rib
Effective load center
Cylindrical roller
Cup small inside

diameter (SID)
Cone, back face

Cone, front face
Cup, back face
Cup, front face
Cylindrical roller bearing
Tapered roller bearing
Lock washer
Bearing bore diameter
Locknut
Tapered bore of
inner ring
Shaft washer
Sleeve
Bearing
height
Ball
Bearing outside diameter
Inner ring
Spherical roller
Housing washer
Outer ring
Spherical roller bearing
Single-direction thrust ball bearing
Fig. 1.10 Diagram of representative bearing parts
A-8
which require high speed, high precision, low torque and

low vibration. Conversely, roller bearings have a larger
load carrying capacity which makes them more suitable
for applications requiring long life and endurance for
heavy loads and shock loads.
1.3 Characteristics of rolling bearings

1.3.1 Characteristics of rolling bearings
Rolling bearings come in many shapes and varieties,
each with its own distinctive features.
However, when compared with sliding bearings, rolling
bearings all have the following advantages:
1.3.3 Radial and thrust bearings

Almost all types of rolling bearings can carry both radial
and axial loads at the same time.
Generally, bearings with a contact angle of less than
45have a much greater radial load capacity and are
classed as radial bearings; whereas bearings which have
a contact angle over 45have a greater axial load
capacity and are classed as thrust bearings. There are
also bearings classed as complex bearings which
combine the loading characteristics of both radial and
thrust bearings.
(1) The starting friction coefficient is lower and there is

little difference between this and the dynamic
friction coefficient is produced.
(2) They are internationally standardized, interchangeable
and readily obtainable.
(3) They are easy to lubricate and consume less
lubricant.
(4) As a general rule, one bearing can carry both radial
and axial loads at the same time.
(5) May be used in either high or low temperature
applications.
(6) Bearing rigidity can be improved by preloading.
1.3.4 Standard bearings and special bearings

Bearings which are internationally standardized as to
shape and size are much more economical to use, as
they are interchangeable and available on a worldwide
basis.
Construction, classes, and special features of rolling

bearings are fully described in the boundary dimensions
and bearing numbering system section.
However, depending on the type of machine they are to

be used in, and the expected application and function, a
non-standard or specially designed bearing may be best
to use. Bearings that are adapted to specific applications,
and "unit bearings" which are integrated (built-in) into a
machine's components, and other specially designed
bearings are also available.
1.3.2 Ball bearings and roller bearings

Generally speaking, when comparing ball and roller
bearings of the same dimensions, ball bearings exhibit a
lower frictional resistance and lower face run-out in
rotation than roller bearings.
This makes them more suitable for use in applications
A-9
Bearing Selection
2. Bearing Selection
Rolling element bearings are available in a variety of
types, configurations, and sizes. When selecting the
correct bearing for your application, it is important to
consider several factors, such as the calculation of
various angles and clearances, which will ensure proper
fit. A comparison of the performance characteristics for

each bearing type is shown in Table 2.1. As a general
guideline, the basic procedure for selecting the most
appropriate bearing is shown in the following flow chart.
2.1 Bearing selection flow chart
Procedure
Confirm operating
conditions and
operating
environment
Function and construction of

components to house bearings
Confirmation items
Bearing mounting location

Bearing load (direction and
magnitude)
Rotational speed
Vibration and shock load
Bearing temperature (ambient
and friction-generated)
Operating environment
(potential for corrosion, degree
of contamination, extent of
lubrication)
Select bearing
type and
configuration
Dimensional limitations
(refer to page insert -28)
Bearing load (magnitude,
direction, vibration; presence
of shock load)
Rotational speed
Bearing tolerances
Rigidity
Allowable misalignment of
inner/outer rings
Friction torque
Bearing arrangement (fixed
side, floating side)
Installation and disassembly
requirements
Bearing availability and cost
Selection of bearing type and configuration
(1) Dimensional limitations

The allowable space for bearings is typically limited.
In most cases, shaft diameter (or the bearing bore
diameter) has been determined according to the
machines other design specifications. Therefore, a
bearings type and dimensions are determined
according to standard bearing bore diameters. For this
reason all dimension tables are organized according to
standard bore diameters. There is a wide range of
standardized bearing types and dimensions: the right
one for a particular application can usually be found in
these tables.
(2) Bearing load
The characteristics, magnitude, and direction of loads
acting upon a bearing are extremely variable. In
general, the basic rated loads shown in bearing
dimension tables indicate their load capacity. However,
in determining the appropriate bearing type,
consideration must also be given to whether the acting
load is a radial load only or an axial load only, or
combined radial and axial load, etc. When ball and
roller bearings within the same dimension series are
considered, the roller bearings have a larger load
capacity and are also capable of withstanding greater
vibration and shock loads.
A-10
Select bearing
dimensions
Design life of components to

house bearings
Dynamic/static equivalent load
conditions
Safety factor
Allowable speed
Allowable axial load
(refer to page insert -17, 25)
Allowable space
Select bearing
tolerances
Shaft runout tolerances

Rotational speed
Torque fluctuation
(3) Rotational speed

The allowable speed of a bearing will differ
depending upon bearing type, size, tolerances, cage
type, load, lubricating conditions, and cooling
conditions.
The allowable speeds listed in the bearing tables for
grease and oil lubrication are for standard NTN
bearings. In general, deep groove ball bearings,
angular contact ball bearings, and cylindrical roller
bearings are most suitable for high speed applications.
(4) Bearing tolerances
The dimensional accuracy and operating tolerances
of bearings are regulated by ISO and JIS standards.
For equipment requiring high tolerance shaft runout or
high speed operation, etc., bearings with Class 5
tolerance or higher are recommended. Deep groove
ball bearings, angular contact ball bearings, and
cylindrical roller bearings are recommended for high
rotational tolerances.
(5) Rigidity
Elastic deformation occurs along the contact surfaces
of a bearings rolling elements and raceway surfaces
when under load. With certain types of equipment it is
necessary to reduce this deformation as much as
Bearing Selection
possible. Roller bearings exhibit less elastic

deformation than ball bearings, and therefore are
recommended for such equipment. Furthermore, in
some cases, bearings are given an initial load
(preloaded) to increase their shafting rigidity. This
procedure is commonly applied to deep groove ball
bearings, angular contact ball bearings, and tapered
roller bearings.
(6) Misalignment of inner and outer rings
Shaft flexure, variations in shaft or housing accuracy,
and fitting errors, etc. result in a certain degree of
misalignment between the bearings inner and outer
rings. In cases where the degree of misalignment is
likely to be relatively large, self-aligning ball bearings,
spherical roller bearings, or bearing units with selfaligning properties are the most appropriate choices.
(Refer to Fig. 2.1)
Fig. 2.1
A-11
Bearing Selection
2.2 Type and character is tics
Table 2.1 shows types and characteristics of rolling bearings.
Table 2.1 Types and characteristics of rolling bearings
Bearing types
Angular Double row

Duplex
DoubleSelfCylindrical
SingleDouble row
contact
angular
flange
angular
aligning
roller
flange
cylindrical
ball
contact
cylindrical
contact
ball
bearings
cylindrical
roller
bearings ball bearings ball bearings bearings
roller bearings roller bearings bearings
Deep
groove
ball
bearings
Characteristics
Load Carrying Capacity
Radial load
Axial load
High speed
High rotating accuracy

Low noise/vibration
Low friction torque
High rigidity
Allowable misalignment 1
for inner/outer rings
For fixed bearings
For floating bearings
Vibration/shock resistance
DB and DF
For
arrangement
DB
For
arrangement
Non-separable or separable
Tapered bore bearings
For duplex
arrangement
Remarks
B-5
Reference page
B-41
B-72
B-41
B-77
NU, N
type
NJ, NF
type
NUP, NP, NH
type
B-89
B-89
B-89
B-89
Bearing types
Tapered Multi-row, Spherical Thrust Double row Spherical

angular
4-row
roller
roller
ball
roller
contact
bearings tapered
bearings bearings thrust ball
thrust
roller
bearings
bearings
bearings.
Reference
page
Characteristics
Load Carrying Capacity
Radial load
Axial load
A-66
High speed
A-31
High rotating accuracy
Low noise/vibration
A-67
Low friction torque
A-54
High rigidity
A-18
Vibration/shock resistance
A-79
Allowable misalignment 1
for inner/outer rings
A-13
For fixed bearings
A-13
For floating bearings
Non-separable or separable
B-131
B-131
B-229
B-265
B-265
B-265
2
3
4
A-79
For duplex
arrangement
Tapered bore bearings

Remarks
Reference page
A-12
1 The number of stars in dicate

the degree to which that bearing
type displays that particular
characteristic.
Not applicable to that bearing
type.
2 Indicates dual direction.
Indicates single direction axial
movement only.
3 Indicates movement at raceway.
Indicates movement at mated
surface of inner or outer ring.
4 Indicates both inner ring and
outer ring are detachable.
5 Indicates inner ring with tapered
bore is possible.
Bearing Selection
outer rings are most desirable. Cylindrical roller bearings
are generally separable and allow for axial displacement
along their raceway surfaces; deep groove ball bearings
are non-separable, but can be mounted to allow for
displacement along their fitting surfaces.
In applications with short distances between bearings,
shaft expansion and contraction due to temperature
fluctuations is slight, therefore the same type of bearing
may be used for both the fixed-side and floating-side
bearing. In such cases it is common to use a set of
matching bearings, such as angular contact ball bearings,
to guide and support the shaft in one axial direction only.
Table 2.2 (1) shows representative bearing
arrangements where the bearing type differs on the fixed
side and floating side. Table 2.2 (2) shows some
common bearing arrangements where no distinction is
made between the fixed side and floating side. Vertical
shaft bearing arrangements are shown in Table 2.2 (3).
2.3 Selection of bearing arrangement

Shaft assemblies generally require two bearings to
support and locate the shaft radially and axially, relative to
the stationary housing. These two bearings are called the
fixed-side and floating-side bearings. The fixed-side
bearing fixes or controls movement of the shaft axially in
relation to the housing. The floating-side bearing moves or
floats axially in relation to the housing and is therefore
able to relieve stress caused by the expansion and
contraction of the shaft due to temperature fluctuations,
and allow for misalignment caused by fitting errors.
Fixed-side bearings have the capacity to receive both
axial and radial loads, and therefore a bearing which
controls axial movement in both directions should be
selected. Floating-side bearings receive only radial loads,
and therefore bearings which are mounted to permit free
axial movement, or bearings with separable inner and
Table 2.2 (1) Bearing arrangement (Fixed and Floating)
Arrangement
Fixed
Comment
Application
Floating
1. General arrangement for small machinery.
2. For radial loads, but will also accept axial loads.
3. Preloading by springs or shims on outer ring face.
Small pumps, small

electric motors,
auto-mobile
transmissions, etc.
1. Suitable for high speed. Widely used.

2. Even with expansion and contraction of shaft, non-fixing side moves
smoothly.
Medium-sized
electric motors,
ventilators, etc.
1. Radial loading plus dual direction axial loading possible.

2. In place of duplex angular contact ball bearings, double-row angular
contact ball bearings are also used.
Wormgear speed
reducers, etc.
1. Heavy loading capable.

2. Shafting rigidity increased by preloading the two back-to-back
fixed bearings.
3. Requires high precision shafts and housings, and minimal fitting
Machine tool
spindles, etc.
1. Allows for shaft deflection and fitting errors.

2. By using an adaptor on long shafts without screws or shoulders,
bearing mounting and dismounting can be facilitated.
3. Not suitable for axial load applications.
Counter shafts for

general industrial
equipment, etc.
1. Widely used in general industrial machinery with heavy and shock

load demands.
2. Allows for shaft deflection and fitting errors.
3. Accepts radial loads as well as dual direction axial loads.
Reduction gears for

generalindustrial
equipment, etc.
1. Widely used in general industrial machinery with heavy and shock

loading.
2. Radial and dual directional axial loading.
Industrial machinery
reduction gears. etc.
1. Capable of handling large radial and axial loads at high rotational

speeds.
2. Maintains clearance between the bearings outer diameter and
housing inner diameter to prevent deep groove ball bearings from
receiving radial loads.
Diesel locomotives,
etc.
A-13
Bearing Selection
Table 2.2 (2) Bearing arrangement (Placed oppositely)
Arrangement
Back to back
Comment
Application
General arrangement for use in small machines.
Small electric motors,

small reduction
gears, etc.
1. This type of back-to-back arrangement well suited for moment loads.

2. Preloading increases shaft rigidity.
3. High speed reliable.
Spindles of machine
tools, etc.
1. Accepts heavy loading.

2. Suitable if inner and outer ring shrink-fit is required.
3. Care must be taken that axial clearance does not become too small
during operation.
Construction
equipment, mining
equipment sheaves,
agitators, etc.
1. Withstands heavy and shock loads. Wide range application.

2. Shafting rigidity increased by preloading.
3. Back-to-back arrangement for moment loads, and face-to-face
arrangement to alleviate fitting errors.
4. With face-to-face arrangement, inner ring shrink-fit is facilitated.
Reduction gears,
automotive axles, etc.
Face to face
Table 2.2 (3) Bearing arrangement (Vertical shaft)
Arrangement
Comment
Application
When fixing bearing is a duplex angular contact ball bearing, non-fixing

bearing is a cylindrical roller bearing.
Machine tool spindles,

vertical mounted
electric motors, etc.
1. Most suitable arrangement for very heavy axial loads.

Crane center shafts,
2. Depending on the relative alignment of the spherical surface of the
etc.
rollers in the upper and lower bearings, shaft deflection and fitting
errors can be absorbed.
3. Lower self-aligning spherical roller thrust bearing pre-load is possible.
A-14
Load Rating and Life

3. Load Rating and Life
3.1 Bearing life
Even in bearings operating under normal conditions, the
surfaces of the raceway and rolling elements are
constantly being subjected to repeated compressive
stresses which causes flaking of these surfaces to occur.
This flaking is due to material fatigue and will eventually
cause the bearings to fail. The effective life of a bearing
is usually defined in terms of the total number of
revolutions a bearing can undergo before flaking of either
the raceway surface or the rolling element surfaces
occurs.
L10
3.1
where,
p= 3......................For ball bearings
p= 10/3.................For roller bearings
L10 : Basic rating life 106 revolutions
C : Basic dynamic rating load, N
(Cr: radial bearings, Ca: thrust bearings)
P : Equivalent dynamic load, N
(Pr: radial bearings, Pa: thrust bearings)
Other causes of bearing failure are often attributed to

problems such as seizing, abrasions, cracking, chipping,
gnawing, rust, etc. However, these so called "causes" of
bearing failure are usually themselves caused by
improper installation, insufficient or improper lubrication,
faulty sealing or inaccurate bearing selection. Since the
above mentioned "causes" of bearing failure can be
avoided by taking the proper precautions, and are not
simply caused by material fatigue, they are considered
separately from the flaking aspect.
The basic rating life can also be expressed in terms of

hours of operation (revolution), and is calculated as
shown in formula (3.2).
p
L10h 500 f h 3.2

fh
fn
fn
3.3
33.3
n
1/p
3.4
3.2 Basic rating life and basic dynamic load rating

where,
L10h : Basic rating life, h
fh : Life factor
fn : Speed factor
n : Rotational speed, r/ min
A group of seemingly identical bearings when subjected

to identical load and operating conditions will exhibit a
wide diversity in their durability.
This "life" disparity can be accounted for by the
difference in the fatigue of the bearing material itself.
This disparity is considered statistically when calculating
bearing life, and the basic rating life is defined as follows.
Ball bearings
The basic rating life is based on a 90% statistical model

which is expressed as the total number of revolutions
90% of the bearings in an identical group of bearings
subjected to identical operating conditions will attain or
surpass before flaking due to material fatigue occurs. For
bearings operating at fixed constant speeds, the basic
rating life (90% reliability) is expressed in the total number
of hours of operation.
n
r/min
fn
60,000
0.082
Roller bearings
L10h
n
80,000
60,000
fh
n
r/min
fn
5.4
80,000
60,000
4.5
40,000
20,000
30,000
6,000
4,000
The basic dynamic load rating is an expression of the

load capacity of a bearing based on a constant load
which the bearing can sustain for one million revolutions
(the basic life rating). For radial bearings this rating
applies to pure radial loads, and for thrust bearings it
refers to pure axial loads. The basic dynamic load ratings
given in the bearing tables of this catalog are for bearings
constructed of NTN standard bearing materials, using
standard manufacturing techniques. Please consult NTN
Engineering for basic load ratings of bearings constructed
of special materials or using special manufacturing
techniques.
3,000
1,500
8,000
0.18
0.24
2,000
10,000
15,000
0.20
10,000
8,000
0.18
0.20
6,000
20,000
0.24
3,000
0.26
0.28
2,000
6,000
10,000
800
0.30
6,000
1,500
4,000
0.35
600
0.4
3,000
2,000
0.5
1.8
600
0.7
0.8
300
1.4
200
1.3
150
1.2
100
1,000
900
800
700
600
500
1.0
400
1.1
20
1.2
15
1.3
1.49
2,000
1.5
1,500
300
1.0
1.4
1.3
0.7
40
30
20
0.80
15
0.74
700
500
1.0
400
1.2
1.44
1.0
0.95
0.90
300
1.3
1.4
10
1.1
600
1.1
0.85
1.2
800
0.9
0.95
1,000
900
60
0.75
200
0.6
0.85
0.80
200
Fig. 3.1 Bearing life rating scale
A-15
1.7
1.6
0.5
0.8
0.90
1.4
10
1.8
3,000
80
1.1
0.9
40
The relationship between the basic rating life, the basic

dynamic load rating and the bearing load is given in
formula (3.1).
1.9
1.5
0.6
80
30
2
4,000
0.4
1.6
1,500
200
60
1.9
800
400
300
100
1,000
0.35
1.7
400
150
2.5
8,000
0.30
1,000
15,000
0.22
4,000
2.5
0.26
0.28
30,000
0.16
3.5
20,000
0.16
0.22
3.5
20,000
15,000
0.14
8,000
40,000
0.14
15,000
10,000
0.12
30,000
40,000
0.12
4.6
4.5
60,000
40,000
0.10
fh
0.106
0.09
30,000
L10h
n
0.76
Formula (3.2) can also be expressed as shown in

formula (3.5).
L10h
10
where,
j : Frequency of individual load conditions
L j : Life under individual conditions
C p
3.5
60 n P
3.3 Machine applications and requisite life

When selecting a bearing, it is essential that the
requisite life of the bearing be established in relation to
the operating conditions. The requisite life of the bearing
is usually determined by the type of machine in which the
bearing will be used, and duration of service and
operational reliability requirements. A general guide to
these requisite life criteria is shown in Table 3.1. When
determining bearing size, the fatigue life of the bearing is
an important factor; however, besides bearing life, the
strength and rigidity of the shaft and housing must also be
taken into consideration.
The relation ship between Rotational speed n and

speed factor fn as well as the relation between the basic
rating life L10h and the life factor fn is shown in Fig. 3.1.
When several bearings are incorporated in machines
or equipment as complete units, all the bearings in the
unit are considered as a whole when computing bearing
life (see formula 3.6). The total bearing life of the unit is
a life rating based on the viable lifetime of the unit before
even one of the bearings fails due to rolling contact
fatigue.
1
L
3.6
1
1
1 1/e
e e
e
L2
Ln
L1
3.4 Adjusted life rating factor

The basic bearing life rating (90% reliability factor) can
be calculated through the formulas mentioned earlier in
Section 5.2. However, in some applications a bearing life
factor of over 90% reliability may be required. To meet
these requirements, bearing life can be lengthened by the
use of specially improved bearing materials or special
construction techniques. Moreover, according to
elastohydrodynamic lubrication theory, it is clear that the
bearing operating conditions (lubrication, temperature,
speed, etc.) all exert an effect on bearing life. All these
adjustment factors are taken into consideration when
calculating bearing life, and using the life adjustment
factor as prescribed in ISO 281, the adjusted bearing life
can be determined.
where,
e = 10/9....................For ball bearings
e = 9/8......................For roller bearings
L : Total basic rating life of entire unit, h
L1 , L2 Ln : Basic rating life of individual bearings, 1, 2,
n, h
When the load conditions vary at regular intervals, the
life can be given by formula (3.7).
-1
Lm j Lj 3.7
Lna a1a2a3
CP 3.8
Table 3.1 Machine application and requisite life

Service
classification
Life factor and machine application L10h
412
Machines used for short

periods or used only
occasionally
Electric hand tools

Household appliances
Short period or intermittent

use, but with high reliability
requirements
Medical appliances Construction

Measuring instruments equipment
Elevators
Cranes
Machines not in constant

use, but used for long
periods
Automobiles
Two-wheeled vehicles
1230
3060
103 h
60
Farm machinery
Office equipment
Home air-
Machines in constant use

over 8 hours a day
conditioning motor
Crane (sheaves)
Small motors
Buses/trucks
Drivers
Woodworking
machines
Machine spindles
Industrial motors
Crushers
Vibrating screens
Main gear drives

Rubber/plastic
Calender rolls
Printing machines
Rolling mills
Escalators
Conveyors
Centrifuges
Railway vehicle
axles Air conditioners
Large motors
Compressor pumps
Locomotive axles
Traction motors
Mine hoists
Pressed flywheels
Papermaking
machines
Propulsion
equipment for
marine vessels
Water supply
equipment
Mine drain
pumps/ventilators
Power generating
equipment
24 hour continuous
operation, non-interruptable
A-16
where,
Lna : Adjusted life rating in millions of revolutions
(106)(adjusted for reliability, material and
operating conditions)
a1 : Reliability adjustment factor
a2 : Material adjustment factor
a3 : Operating condition adjustment factor
insufficient oil film formation can be caused, for example,

by the lubricating oil viscosity being too low for the
operating temperature (below 13 mm2/s for ball bearings;
below 20 mm2/s for roller bearings); or by exceptionally
low rotational speed (nr/min x d p mm less than 10,000).
For bearings used under special operating conditions,
please consult NTN Engineering.
3.4.1 Life adjustment factor for reliability a1

The values for the reliability adjustment factor a1 (for a
reliability factor higher than 90%) can be found in Table
3.2.
As the operating temperature of the bearing increases,

the hardness of the bearing material decreases. Thus, the
bearing life correspondingly decreases. The operating
temperature adjustment values are shown in Fig. 3.2.
Reliability %
Ln
Reliability factor a1
90
L10
1.00
95
L5
0.62
96
L4
0.53
97
L3
0.44
98
L2
0.33
99
L1
0.21
Life adjustment value a3
Table 3.2 Reliability adjustment factor values a1

1.0
0.8
0.6
0.4
0.2
100
150
200
250
300
Operating temperature C
3.4.2 Life adjustment factor for material a2

The life of a bearing is affected by the material type and
quality as well as the manufacturing process. In this
regard, the life is adjusted by the use of an a2 factor.
Fig. 3.2 Life adjustment value for operating temperature
3.5 Basic static load rating
The basic dynamic load ratings listed in the catalog are

based on NTN's standard material and process,
therefore, the adjustment factor a2 =1. When special
materials or processes are used the adjustment factor
can be larger than 1.
When stationary rolling bearings are subjected to static

loads, they suffer from partial permanent deformation of
the contact surfaces at the contact point between the
rolling elements and the raceway. The amount of
deformity increases as the load increases, and if this
increase in load exceeds certain limits, the subsequent
smooth operation of the bearings is impaired.
NTN bearings can generally be used up to 120C. If

bearings are operated at a higher temperature, the
bearing must be specially heat treated (stabilized) so that
inadmissible dimensional change does not occur due to
changes in the micro-structure. This special heat
treatment might cause the reduction of bearing life
because of a hardness change.
It has been found through experience that a permanent

deformity of 0.0001 times the diameter of the rolling
element, occurring at the most heavily stressed contact
point between the raceway and the rolling elements, can
be tolerated without any impairment in running efficiency.
3.4.3 Life adjustment factor a3 for operating conditions

The operating conditions life adjustment factor a3 is
used to adjust for such conditions as lubrication,
operating temperature, and other operation factors which
have an effect on bearing life.
The basic rating static load refers to a fixed static load

limit at which a specified amount of permanent
deformation occurs. It applies to pure radial loads for
radial bearings and to pure axial loads for thrust bearings.
The maximum applied load values for contact stress
occurring at the rolling element and raceway contact
points are given below.
Generally speaking, when lubricating conditions are

satisfactory, the a3 factor has a value of one; and when
lubricating conditions are exceptionally favorable, and all
other operating conditions are normal, a3 can have a
value greater than one.
For ball bearings

(except self-aligning ball bearings)
For self-aligning ball bearings
For roller bearings
However, when lubricating conditions are particularly

unfavorable and the oil film formation on the contact
surfaces of the raceway and rolling elements is
insufficient, the value of a3 becomes less than one. This
A-17
4,200 Mpa
4,600 Mpa
4,000 Mpa
Table 3.4 Minimum safety factor values S0
3.6 Allowable static equivalent load
Ball
bearings
Roller
bearings
High rotational accuracy demand
Normal rotating accuracy demand

(Universal application)
1.5
0.5
Operating conditions
Generally the static equivalent load which can be

permitted (See Section 4.4.2 page A-23) is limited by the
basic static rating load as stated in Section 5.5.
However, depending on requirements regarding friction
and smooth operation, these limits may be greater or
lesser than the basic static rating load.
Slight rotational accuracy

deterioration permitted
(Low speed, heavy loading, etc.)
In the following formula (3.9) and Table 3.4 the safety

factor S0 can be determined considering the maximum
static equivalent load.
Note 1: For spherical thrust roller bearings, min. S0 value=4.

2: For shell needle roller bearings, min. S0 value=3.
3: When vibration and/or shock loads are present, a load factor
based on the shock load needs to be included in the P0 max value.
So =CoPo3.9
where,
So : Safety factor
Co : Basic static rating load, N
(radial bearings: Cor, thrust bearings: Coa)
Po max : Maximum static equivalent load, N
(radial: Por max, thrust: Coa max)
A-18
Bearing Load Calculation

4. Bearing Load Calculation
To compute bearing loads, the forces which act on the
shaft being supported by the bearing must be
determined. These forces include the inherent dead
weight of the rotating body (the weight of the shafts and
components themselves), loads generated by the
working forces of the machine, and loads arising from
transmitted power.
Kt
19.110 H
Dpn
4.2
kgf
Ks KttanSpur gear4.2a
tan
Kt cosHelical gear4.2b
Kr Kt Ks 4.3
2
Ka KttanHelical gear 4.4

where,
Kt Tangential gear load (tangential force), N
Ks Radial gear load (separating force), N
Kr Right angle shaft load (resultant force of
tangential force and separating force), N
KaParallel load on shaft, N
H Transmission force , kW
n Rotational speed, r/min
DpGear pitch circle diameter, mm
Gear pressure angle
Gear helix angle
4.1 Load acting on shafts

4.1.1 Load factor
There are many instances where the actual operational
shaft load is much greater than the theoretically
calculated load, due to machine vibration and/or shock.
This actual shaft load can be found by using formula
(4.1).
K fwKc 4.1
where,
K Actual shaft load Nkgf
fw Load factor (Table 4.1)
KcTheoretically calculated value Nkgf
4.1.2 Gear load
The loads operating on gears can be divided into three
main types according to the direction in which the load is
applied; i.e. tangential (Kt), radial (Ks), and axial (Ka).
The magnitude and direction of these loads differ
according to the types of gears involved. The load
calculation methods given herein are for two general-use
gear and shaft arrangements: parallel shaft gears, and
cross shaft gears. For load calculation methods
regarding other types of gear and shaft arrangements,
Ks
Kt
Fig. 4.1 Spur gear loads
(1)Loads acting on parallel shaft gears

The forces acting on spur and helical parallel shaft
gears are depicted in Figs. 4.1, 4.2, and 4.3. The load
magnitude can be found by using or formulas (4.2),
through (4.4).
Ks
Ka
Kt
Fig. 4.2
Table 4.1 Load factor fw

fw
1.9510 H
Dpn
It is possible to calculate theoretical values for these

loads; however, there are many instances where the
load acting on the bearing is usually determined by the
nature of the load acting on the main power
transmission shaft.
Amount
of shock
Helical gear loads
Application
Kt
Electric machines, machine tools,

1.01.2 measuring instruments.
Light shock
Railway vehicles, automobiles,

rolling mills, metal working machines,
paper making machines, rubber mixing
1.21.5 machines, printing machines, aircraft,
textile machines, electrical units, office
machines.
Heavy shock
Crushers, agricultural equipment,

1.53.0 construction equipment, cranes.
Kr
Ks
Dp
Very little or
no shock
Fig. 4.3
A-19
Radial resultant forces
Because the actual gear load also contains vibrations

and shock loads as well, the theoretical load obtained by
the above formula should also be adjusted by the gear
factor fz as shown in Table 4.2.
where,
KspKsg Pinion and gear separating force, N
KapKagPinion and gear axial load, N
Table 4.2 Gear factor fz

Gear type
fz
Precision ground gears

(Pitch and tooth profile errors of less than 0.02 mm)
1.051.1
Ordinary machined gears

(Pitch and tooth profile errors of less than 0.1 mm)
1.11.3
For spiral bevel gears, the direction of the load varies

depending on the direction of the helix angle, the direction
of rotation, and which side is the driving side or the driven
side. The directions for the separating force (Ks) and axial
load (Ka) shown in Fig. 4.5 are positive directions. The
direction of rotation and the helix angle direction are
defined as viewed from the large end of the gear. The
gear rotation direction in Fig. 4.5 is assumed to be
clockwise (right).
(2)Loads acting on cross shafts

Gear loads acting on straight tooth bevel gears and
spiral bevel gears on cross shafts are shown in Figs. 4.4
and 4.5. The calculation methods for these gear loads are
shown in Table 4.3. Herein, to calculate gear loads for
straight bevel gears, the helix angle = 0.
K tp
Ka p
Ks p
Ka g
Ks g
The symbols and units used in Table 4.3 are as follows:

Kt Tangential gear load (tangential force), N
Ks Radial gear load (separating force), N
Ka Parallel shaft load (axial load), N
H Transmission force, kW
n Rotational speed, r/min
Dpm Mean pitch circle diameter, mm
Gear pressure angle
Helix angle
Pitch cone angle
Kt g
Fig. 4.4 Loads on bevel gears

Kt
Ka
Ks

In general, the relationship between the gear load and

the pinion gear load, due to the right angle intersection of
the two shafts, is as follows:
KspKag4.5
KapKsg4.6
D pm
2
Fig. 4.5 Bevel gear diagram
Table 4.3 Loads acting on bevel gears

Pinion
Rotation
direction
Helix
direction
Unit N
Clockwise
Counter clockwise
Clockwise
Counter clockwise
Right
Left
Left
Right
Kt=
Tangential load Kt
19.110 H
Dpmn
1.9510 H
Dpmn
Driving side
Ks=Kt
tan cos + tansin

cos
Ks=Kt
tan cos - tansin

cos
Driven side
Ks=Kt
tan cos - tansin

cos
Ks=Kt
tan cos + tansin

cos
Driving side
Ka=Kt
tan sin - tancos

cos
Ka=Kt
tan sin + tancos

cos
Driven side
Ka=Kt
tan sin + tancos

cos
Ka=Kt
tan sin - tancos

cos
Separating force Ks
Axial load Ka
A-20
4.1.2 Chain / belt shaft load

The tangential loads on sprockets or pulleys when
power (load) is transmitted by means of chains or belts
can be calculated by formula (4.7).
4.2 Bearing load distribution

For shafting, the static tension is considered to be
supported by the bearings, and any loads acting on the
shafts are distributed to the bearings.
19.1 10 H
Dpn
Kt
For example, in the gear shaft assembly depicted in

Fig. 4.7, the applied bearing loads can be found by using
formulas (4.10) and (4.11).
4.7
1.9510 H
kgf
Dpn
FrA
where,
Kt Sprocket/pulley tangential load, N
a+b
d
F1
b
c+d
FrB
H Transmitted force, kW
F2 4.10
a
c
F1
F2 4.11
b
c+d
where,
FrARadial load on bearing A, N
FrBRadial load on bearing B, N
F1, F2Radial load on shaft, N
DpSprocket/pulley pitch diameter,mm

For belt drives, an initial tension is applied to give
sufficient constant operating tension on the belt and
pulley. Taking this tension into account, the radial loads
acting on the pulley are expressed by formula (4.8). For
chain drives, the same formula can also be used if
vibrations and shock loads are taken into consideration.
Krf bKt4.8
where,
KrSprocket or pulley radial load, N
f bChain or belt factor (Table 4.3)
Table. 4.4 chain or belt factor f b

Chain or belt type
Bearing A
Bearing B
FrA
FrB
fb
Chain (single)
1.21.5
V-belt
1.52.0
Timing belt
1.11.3
Flat belt (w / tension pulley)
2.53.0
Flat belt
3.04.0
F!
Fig. 4.7 Gear shaft
se side
F1 Loo
Dp
Kr
F2 Tens
ion
F@
c
side
Fig. 4.6 Chain / belt loads
A-21
(3) Linear fluctuating load

The mean load, Fm, can be approximated by formula
(4.14).
4.3 Mean load

The load on bearings used in machines under normal
circumstances will, in many cases, fluctuate according to
a fixed time period or planned operation schedule. The
load on bearings operating under such conditions can be
converted to a mean load (Fm), this is a load which gives
bearings the same life they would have under constant
operating conditions.
Fm
Fmin2Fmax
4.14
3
(1) Fluctuating stepped load

The mean bearing load, Fm, for stepped loads is
calculated from formula (4.12). F1 , F2 ....... Fn are the
loads acting on the bearing; n1, n2.......nn and t1, t2.......
tn are the bearing speeds and operating times
respectively.
Fmax
Fm
Fmin
Fi ni ti 1/p
4.12
ni ti
Fm
where:
Fig. 4.10 Linear fluctuating load
For ball bearings

For roller bearings
p3
p10/3
(4) Sinusoidal fluctuating load

The mean load, Fm, can be approximated by formulas
(4.15) and (4.16).
F
F1
F2
case (a)
case (b)
Fm
Fn
n 1 t1
n2t2
Fm0.75 Fmax 4.15

Fm0.65 Fmax 4.16
n n tn
Fmax
Fig. 4.8 Stepped load
Fm
(2) Consecutive series load

Where it is possible to express the function F(t) in
terms of load cycle to and time t, the mean load is
found by using formula (4.13).
Fm
to
1
p
td t
F
to o
a
F
1/p
4.13
Fmax
where:
p3
p10/3
For ball bearings

For roller bearings
Fm
b
F
Fig. 4.11 Sinusoidal variable load
F(t)
Fm
to
2to
Fig. 4.9 Time function series load
A-22
where,
4.4 Equivalent load
PorStatic equivalent radial load, N

Fr Actual radial load, N
Fa Actual axial load, N
Xo Static radial load factor
Yo Static axial load factor
The values for Xo and Yo are given in the respective
bearing tables.
4.4.1 Dynamic equivalent load

When both dynamic radial loads and dynamic axial
loads act on a bearing at the same time, the hypothetical
load acting on the center of the bearing which gives the
bearings the same life as if they had only a radial load or
only an axial load is called the dynamic equivalent load.
(2) Static equivalent axial load

For spherical thrust roller bearings the static equivalent
axial load is expressed by formula (4.21).
PoaFa2.7Fr4.21
where,
PoaStatic equivalent axial load, N
Fa Actual axial load, N
Provided that Fr / Fa 0.55 only.
For radial bearings, this load is expressed as pure

radial load and is called the dynamic equivalent radial
load. For thrust bearings, it is expressed as pure axial
load, and is called the dynamic equivalent axial load.
(1) Dynamic equivalent radial load
The dynamic equivalent radial load is expressed by
formula (4.17).
where,
PrDynamic equivalent radial load, N
FrActual radial load, N
FaActual axial load, N
X Radial load factor
Y Axial load factor
The values for X and Y are listed in the bearing tables.
(2) Dynamic equivalent axial load
As a rule, standard thrust bearings with a contact angle
of 90 cannot carry radial loads. However, self-aligning
thrust roller bearings can accept some radial load. The
dynamic equivalent axial load for these bearings is
given in formula (4.18).
PaFa1.2Fr4.18
where,
PaDynamic equivalent axial load, N
FaActual axial load, N
Provided that Fr / Fa 0.55 only.
4.4.2 Static equivalent load
The static equivalent load is a hypothetical load which
would cause the same total permanent deformation at the
most heavily stressed contact point between the rolling
elements and the raceway as under actual load
conditions; that is when both static radial loads and static
axial loads are simultaneously applied to the bearing.
For radial bearings this hypothetical load refers to pure
radial loads, and for thrust bearings it refers to pure
centric axial loads. These loads are designated static
equivalent radial loads and static equivalent axial loads
respectively.
(1) Static equivalent radial load
For radial bearings the static equivalent radial load can
be found by using formula (4.19) or (4.20). The greater
of the two resultant values is always taken for Por.
PorXo FrYo Fa 4.19
PorFr 4.20
A-23
4.4.3 Load calculation for angular ball bearings and

tapered roller bearings
For angular ball bearings and tapered roller bearings
the pressure cone apex (load center) is located as shown
in Fig. 4.12, and their values are listed in the bearing
tables.
Fa
Load center
When radial loads act on these types of bearings the

component force is induced in the axial direction. For this
reason, these bearings are used in pairs (either DB or DF
arrangements). For load calculation this component force
must be taken into consideration and is expressed by
formula (4.22).
Fa
Fr
Load center
Fr
0.5Fr
Fa Y 4.22
The equivalent radial loads for these bearing pairs are
given in Table 4.5.
a
Fig. 4.12 Pressure cone apex
Table 4.5 Bearing arrangement and dynamic equivalent load

Bearing arrangement
DB
arrangement
Brg1
Load condition
Brg2
0.5Fr1 0.5Fr2
Fa
Y1
Y2
Fa
F r1
DF
arrangement
F r2
Brg2
Brg1
Fa
Fr2
DB
arrangement
0.5Fr1 0.5Fr2
Fa
Y1
Y2
Brg1
Fr1
Brg2
Fa
Fr1
DF
arrangement
Fr2
Brg2
Brg1
0.5Fr2 0.5Fr1
Fa
Y1
Y2
Fa
Fr2
0.5Fr2 0.5Fr1
Fa
Y2
Y1
Fr1
Axial load
Equivalent radial load
Fa1 0.5Fr2 Fa
Y2
Pr1XFr1Y1 0.5Fr2 Fa
Y2
Fa2 0.5Fr2
Y2
Pr2Fr2
Fa1 0.5Fr1
Y1
Pr1Fr1
Fa2 0.5Fr1 Fa
Y1
Pr2XFr2Y2 0.5Fr1 Fa
Y1
Fa1 0.5Fr1
Y1
Pr1Fr1
Fa2 0.5Fr1 Fa
Y1
Pr2XFr2Y2 0.5Fr1 Fa
Y1
Fa1 0.5Fr2 Fa
Y2
Pr1XFr1Y1 0.5Fr2 Fa
Y2
Fa2 0.5Fr2
Y2
Pr2Fr2
Note 1: The above are valid when the bearing internal clearance and preload are zero.
2: Radial forces in the opposite direction to the arrow in the above illustration are also regarded as positive.
A-24
4.6 Bearing rated life and load calculation

examples
(Example 3)
Determine the optimum model number for a
cylindrical roller bearing operating at 450 r/min,
with a radial load Fr of 200 kN, and which must
have a life of over 20,000 hours.
In the examples given in this section, for the purpose of

calculation, all hypothetical load factors as well as all
calculated load factors may be presumed to be included
in the resultant load values.
From Fig. 3.1 the life factor fh = 3.02 (L10h at 20,000),

and the speed factor fn = 0.46 (n = 450 r/min). To find the
required basic dynamic load rating, Cr, formula (3.3) is
used.
(Example 1)
What is the rating life in hours of operation (L10h)
for deep groove ball bearing 6208 operating at
650 r/min, with a radial load Fr of 3.2 kN ?
fh
3.02
Pr
200
0.46
fn
1 313kN134,000kgf
Cr
From formula (4.17) the dynamic equivalent radial load:

PrFr3.2kN326kgf
The basic dynamic rated load for bearing 6208 (from
bearing table) is 29.1 kN, and the speed factor (fn) for ball
bearings at 650 r/min (n) from Fig. 4.1 is 0.37. The life
factor, fh, from formula (3.3) is:
f hfn
From the bearing table, the smallest bearing that fulfills

all the requirements is NU2336 (Cr = 1380 kN).
(Example 4)
What are the rated lives of the two tapered roller
bearings supporting the shaft shown in Fig. 4.14
Bearing @ is an 4T-32206 with a Cr = 54.5 kN,
and bearing ! is an 4T-32205 with a Cr = 42.0 kN.
The spur gear shaft has a pitch circle diameter Dp of
150 mm, and a pressure angle of 20. The gear
transmitted force HP = 150 kW at 2,000 r/min
(speed factor n).
29.1
Cr
0.37
3.36
3.2
Pr
Therefore, with fh = 3.36 from Fig. 3.1 the rated life, L10h,
is approximately 19,000 hours.
(Example 2)
What is the life rating L10h for the same bearing and
conditions as in Example 1, but with an additional
axial load Fa of 1.8 kN ?
To find the dynamic equivalent radial load value for Pr,

the radial load factor X and axial load factor Y are used.
The basic static load rating, Cor, for bearing 6208 is 17.8
kN.
Bearings1
(4T-32206)
150
Bearings2
(4T-32205)
1.8
Fa
0.10
17.8
Cor
Therefore, from the bearing tables e= 0.29.

For the operating radial load and axial load:
70
1.8
Fa
0.56e=0.29
3.2
Fr
Fig. 4.14 Spur gear diagram
From the bearing tables X = 0.56 and Y = 1.48, and

from formula (4.17) the equivalent radial load, Pr, is:
The gear load from formulas (4.1), (4.2a) and (4.3) is:
6
19.110 H
19,100150
Dpn
1502,000
9.55kN974kgf
Kt
PrXFrYFa0.563.21.481.8
4.46
100
170
kN455kgf
Ks Kttan9.55tan20
From Fig. 3.1 and formula (3.3) the life factor, fh, is:
3.48kN355kgf
29.1
Cr
f hfn
0.37
2.41
4.46
Pr
Kr Kt2 Ks2 9.552 3.482

10.16kN1,040kgf
The radial loads for bearings ! and @ are:
Therefore, with life factor fh = 2.41, from Fig. 5.1 the

rated life, L10h, is approximately 7,000 hours.
Fr1
A-26
100
100
Kr
10.165.98kN610kgf
170
170
The equivalent radial load, Pr, for each operating condition

is found by using formula (4.17) and shown in Table 4.8.
Because all the values for Fri and Fai from the bearing tables
are greater than Fa / Fr > e 0.18, X 0.67 e Y2 5.50.
70
70
Kr
10.164.18kN426kgf
170
170
Fr2
0.5Fr1
0.5Fr2
1.87
1.31
Y1
Y2
Pri XFri Y2 Fai 0.67Fri 5.50Fai
The equivalent radial load is:
Table 4.8
Pr1 Fr1 5.98kN610kgf

Pr2 XFr2 Y2
0.5Fr1
Y1
0.44.181.671.87
4.66kN475kgf
From formula (3.3) and Fig. 3.1 the life factor, fh, for each
bearing is:
Fm =
(Example 6)
Find the Basic rated life and limit of allowable axial
load when operated following.
Provided that intermittent axial load and oil lubricant.
Fr10kN1,020kgf
n 2,000 r/min
The equivalent radial load is:

PrFr10kN1,020kgf
The speed factor of cylindrical roller bearing, fn , at n
2,000 r/min
The combined bearing life, Lh, from formula (3.6) is:

1
fn
1/e
33.3
2,000
3/10
0.293
The life factor, f h, from formula (3.4)

1
nii3/10
48.1kN4,906kgf
i i
Lh1 13,200a2
13,2001.4
18,480 ore
Lh2 12,700a2
12,7001.4
17,780 ore
17.7 1805
30.0 3060
46.4 4733
55.3 5641
75.1 7660
10/3
Cr2
0.29342.04.662.64
Pr2
1
1
e
e
Lh1
Lh2
1
2
3
4
5
Pri
Therefore: a2 1.44T-tapered roller bearings shown in

B-136)
Lh
Equivalent radial load. Pri

kN kgf
From formula (4.12) the mean load, Fm, is:
Cr1
f h1 fn
0.29354.55.982.67
Pr1
f h2 fn
Condition No.
i
1
1
18,4809/8 17,7809/8
124
3.63
10
There fore the basic rated life, L10h ,from formula (3.3)
f h0.293
8/9
9,780 hour
L10h 5003.63 24,000

And next, allowable axial load of cylindrical roller bearing is
shown in a heading 4.5.
(Example 5)
Find the mean load for spherical roller bearing 23932
(La = 320 kN) when operated under the fluctuating
conditions shown in Table 4.7.
The value of coefficient, k, show in table 4.6. k 0.065

60130
/295mmn2,000 r/min
dp
Take into consideration that intermittent axial load.
Condition Operating
time
No.
i
i
Radial load
Fri
kN kgf
Axial load
Fai
kN kgf
Revolution
ni
rpm
10 1020
2 204
1200
10
12 1220
4 408
1000
60
20 2040
6 612
800
15
25 2550
7 714
600
10
30 3060
10 1020
400
dpn10 1910
The allowable face pressure of the collar, Pt , from
Fig.4.13.
Table 4.7
Pt 40MPa
There fore the allowable axial load, Pz, following
2
Pz 0.06560 40936N95.5kgf
and meet a demand Fa max0.410,0004,000N from table
4.6.
A-27
Boundary Dimensions and Bearing Number Codes
5.1 Boundary dimensions

A rolling bearing's major dimensions, known as
"boundary dimensions," are shown in Figs. 5.1 - 5.3. To
facilitate international bearing interchangeability and
economical bearing production, bearing boundary
dimensions have been standardized by the International
Standards Organization (ISO). In Japan, rolling bearing
boundary dimensions are regulated by Japanese Industrial
Standards (JIS B 1512).
Those boundary dimensions which have been
standardized include: bearing bore diameter, outside
diameter, width/height, and chamfer dimensions - all
important dimensions when considering the compatibility
A-28
standardized, and have been listed here for purposes of

future standardization, there are many standard bearing
dimensions which are not presently manufactured.
related specifications. Bearing numbers are comprised of a

"basic number" followed by "supplementary codes." The
makeup and order of bearing numbers is shown in Table 5.2.
Boundary dimensions for radial bearings (excluding

tapered roller bearings) are shown in the attached tables.
The basic number indicates general information about a

bearing, such as its fundamental type, boundary
dimensions, series number, bore diameter code and
contact angle. The supplementary codes derive from
prefixes and suffixes which indicate a bearing's tolerances,
internal clearances, and related specifications.
5.2 Bearing numbers

Rolling bearing part numbers indicate bearing type,
dimensions, tolerances, internal construction, and other
(Bearing number examples)
6205ZZC32A
23034BD1
Lubrication hole/lubrication groove
Shell Alvania 2 grease
Radial internal clearance C3
shielded (both)
Nominal bore diameter 25mm
Diameter series 2
(when outer diameter is less than 320mm)

Type B
Dimension series 0
Width series 3
240750BK30
7012CDBGMP4
Bore diameter: tapered inner

ring bore, standard taper ratio 1:30
Tolerances JIS Class 4

Medium preload
Back-to-back duplex arrangement
Contact angle 15
Dimension series 0
NU320G1C3
Type B
Dimension series 0
Width series 4
51120L1P5
Radial internal clearance C3
High strength machined brass
rivetless cage with square holes
Dimension series 3
Cylindrical roller bearing NU type
Tolerances JIS Class 5

High strength, machined
brass cage
Diameter series 1
Height series 1
Thrust ball bearing
4T30208
Diameter series 2
Width series 0
Spec. 4T (top tapered)
A-29
Table 5.2 Bearing number composition and arrangement

Basic number
Supplementary prefix code
Special application/material/
heat treatment code
4T:
ET:
E:
4T tapered roller bearings

ET tapered roller bearings
carburized alloy steel
bearings
F:
stainless steel bearings
H:
high speed steel bearings
M:
plated bearings
5S:
ceramic rolling element

bearings
HL:
HL (high lubrication) roller

bearings
TS2: dimension stabilized

bearing for high
temperature use
(to 160C)
TS3:
TS4:
dimension stabilized
bearing for high
temperature use
(to 200C)
dimension stabilized
bearing for high
temperature use
(to 250C)
Basic numbers
Bearing
series code
Dimension series code

1
Width/height series
Diameter series
Deep groove ball bearings (type code 6)

68
69
60
62
63
(1)
(1)
(1)
(0)
(0)
8
9
0
2
3
Angular contact ball bearings (type code 7)

78
79
70
72
73
(1)
(1)
(1)
(0)
(0)
8
9
0
2
3
Self-aligning ball bearings (type code 1,2)

12
13
22
23
(0)
(0)
(2)
(2)
2
3
2
3
Cylindrical roller bearings (type code NU, N, NF, NNU, NN, etc.)
NU10
NU2
NU22
NU3
NU23
NU4
NNU49
NN30
1
(0)
2
(0)
2
(0)
4
3
0
2
2
3
3
4
9
0
Tapered roller bearings (type code 3)

329X
320X
302
322
303
303D
313X
323
2
2
0
2
0
0
1
2
9
0
2
2
3
3
3
3
Bore diameter number

bore
Code
diameter mm
/0.6
/1.5
/2.5
0.6
1.5
2.5
00
01
02
03
10
12
15
17
/22
/28
/32
22
28
32
04
05
06
20
25
30
88
92
96
440
460
480
/500
/530
/560
500
530
560
/2,360
/2,500
2,360
2,500
Contact angle code

1
Code
Contact angle
Angular contact ball bearings

A Standard contact angle 30
B
Standard contact angle 40
Standard contact angle 15
C
Tapered roller bearings
B Contact angle over 10
to/including 17
C
Contact angle over 17
D
to/including 24
Contact angle over 24
to/including 32
Spherical roller bearings (type code 2)

239
230
240
231
241
222
232
213
223
3
3
4
3
4
2
3
1
2
9
0
0
1
1
2
2
3
3
Single direction thrust ball bearings (type code 5)

511
512
513
514
1
1
1
1
1
2
3
4
Cylindrical roller thrust bearings (type code 8)

811
812
893
1
1
9
1
2
3
Self-aligning thrust roller bearings (type code 2)

292
9
2
293
9
3
294
9
4
1 Codes in ( ) are not shown in nominal numbers.

Note: Please consult NTN Engineering concerning bearing series codes, and supplementary prefix/suffix codes not listed in the above table.
A-30
Supplementary suffix codes

Internal
modifications code
U:
Internationally
interchangeable
tapered roller
bearings
R:
Noninternationally
interchangeable
tapered roller
bearings
ST:
Low torque
tapered roller
bearings
HT:
High axial load
use cylindrical
roller bearings
Cage code
Seal /
Shield code
Raceway
configuration code
Duplex
Internal clearance
arrangement code
/preload code
L1:
High strength,
machined brass
cage
LLB:
Synthetic rubber
seal (noncontact type)
K:
Tapered inner
ring bore,
standard taper
ratio 1:12
DB:
Back-to-back
arrangement
F1:
Machined
carbon steel
cage
G1:
High strength
machined brass
rivet-less
cage with
square holes,
G2:
Pin type cage
J:
Pressed steel
cage
T2:
Plastic mold
cage
LLU:
Synthetic rubber K30:
seal
Tapered inner
(contact type)
ring bore,
standard taper
LLH:
ratio 1:30
Synthetic rubber
seal
N:
(low-torque type) Snap ring
groove
ZZ:
Steel shield
NR:
Snap ring
groove with
snap ring
D:
Lubrication
hole/lubrication
groove
DF:
Face-to-face
arrangement
DT:
Tandem
arrangement
D2:
Two matched,
paired bearings
C2:
Internal
clearance less
than normal
(CN):
Normal clearance
C3:
Internal
clearance
greater than
normal
C4:
Internal
G: Flush ground clearance
greater than C3
:
C5:
Spacer
Internal
(= spacers
clearance
standard width
greater than C4
dimensions)
P6:
JIS Class 6
P5:
JIS Class 5
P4:
JIS Class 4
P2:
JIS Class 2
/8A:
Shell Alvania
EP2 grease
3:
Inch series
tapered roller
bearing (ABMA)
Class 3
/LP03:
Solid grease
(for use with
solid grease
bearings)
/GL:
Light preload
00:
Inch series
tapered roller
bearing (ABMA)
Class 00
GH:
Heavy preload
/3A:
Shell Alvania 3
grease
/5K:
MULTEMP SRL
0:
Inch series
tapered roller
bearing (ABMA)
Class 0
GM:
Medium preload
/2A:
Shell Alvania 2
grease
2:
Inch series
tapered roller
bearing (ABMA)
Class 2
CM:
Radial internal
clearance for
electric motor
use
GN:
Normal preload
A-31
Tolerance code Lubrication code
/LX11:
Barierta JFE552
A-30
Bearing Tolerances
6. Bearing Tolerances
Running accuracy
Running accuracy constitutes the acceptable values for
inner and outer ring radial runout and axial runout, inner
ring side runout, and outer ring outer diameter runout.
Allowable rolling bearing tolerances have been
established according to precision classes. JIS Class 0
corresponds to normal precision class bearings, and
precision becomes progressively higher as the class
number becomes smaller; i.e., Class 6 is less precise than
Class 5, which is less precise than Class 4, and so on.
Table 6.1 indicates which standards and precision
classes are applicable to the major bearing types. Table
6.2 shows a relative comparison between JIS B 1514
precision class standards and other standards. For greater
detail on allowable error limitations and values, refer to
Tables 6.3 - 6.9. Allowable values for chamfer dimensions
are shown in Table 6.10, and allowable error limitations
and values for radial bearing inner ring tapered bores are
shown in Table 6.11.
6.1 Dimensional accuracy and running accuracy

Bearing tolerances or dimensional accuracy and
running accuracy, are regulated by ISO and JIS B 1514
standards (rolling bearing tolerances). For dimensional
accuracy, these standards prescribe the tolerances
necessary when installing bearings on shafts or in
housings. Running accuracy is defined as the allowable
limits for bearing runout during operation.
Dimensional accuracy
Dimensional accuracy constitutes the acceptable values
for bore diameter, outer diameter, assembled bearing
width, and bore diameter uniformity as seen in chamfer
dimensions, allowable inner ring tapered bore deviation
and shape error. Also included are, average bore diameter
variation average, outer diameter variation, average outer
diameter unevenness, as well as raceway width and
height variation (for thrust bearings).
Table 6.1 Bearing types and applicable tolerance

Applicable standard
Bearing type
Tolerance table
Appliclble tolerance
class 0
class 6
class 5
class 4
class 2
class 0
class 6
class 5
class 4
class 2
class 0
class 0
class 6
class 5
class 4 class 2
class 0
class 6
class 5
class 4
class 0
ISO492
Cylindrical roller bearigns
Tapered
roller
bearings
Table 6.3
metric
ISO492
class 0,6X
class 6
class 5
class 5
Table 6.4
Inch
AFBMA Std.19
class 4
class 2
class 3
class 0
class 00
Table 6.5
J series
ANSI/AFBMA Std.19.1 class K
class N
class C
class B
class A
Table 6.6
class 0
class 6
class 5
class 4
Table 6.7
class 0
Table 6.8
class 5
class 4
Table 6.9
ISO199
Spherical roller thrust bearings

Double direction angular contact thrust ball bearings
NTN standard
Table 6.2 Comparison of tolerance classifications of national standards

Standard
Japanese industrial
standard (JIS)
International Organization
for Standardization (ISO)
Tolerance Class
class 0,6X
class 6
class 5
class 4
class 2
All type
ISO 492
Normal
class
Class 6X
Class 6
Class 5
Class 4
Class 2
Radial bearings
ISO 199
Normal
class
Class 6
Class 5
Class 4
ISO 578
Class 4
Class 3
Class 0 Class 00 Tapered roller bearings (Inch series)
Class 5A Class 4A
P0
P6
JIS B 1514
ISO 1224
Deutsches Institut
fur Normung(ISO)
American National
Standards Institute (ANSI)
Anti-Friction Bearing
Manufacturers (AFBMA)
Bearing Types
DIN 620
1
P5
P4
Precision instrument bearings
P2
All type
ABEC-3 ABEC-5
ABEC-7 ABEC-9
RBEC-3 RBEC-5
Radial bearings
(Except tapered roller bearings)
Class K
Class N Class C Class B
Tapered roller bearings (Metric series)
Class 4
Class 2
ANSI/ABMA Std.20
ABEC-1
RBEC-1
ANSI/ABMA Std.19.1
ANSI/ABMA Std.19
Class 3
Class 0 Class 00 Tapered roller bearings (Inch series)
1 "ABEC" is applied for ball bearings and "RBEC" for roller bearings.
Notes 1: JIS B 1514, ISO 492 and 199, and DIN 620 have the same specification level.
2: The tolerance and allowance of JIS B 1514 are a little different from those of AFBMA standards.
A-33
Class A
Bearing Tolerances
Table 6.3 Tolerance for radial bearings (Except tapered roller bearings)
Table 6.3 (1) Inner rings
Nominal
bore
diameter
Single radial plane bore diameter variation
Single plane mean bore diameter deviation
dmp
Vdp
diameter series 9
mm
class 0
over
incl.
high
class 6
low high
class 5
low high
class 4
low high
class 2
maxdiameter series 0.1
maxdiameter series 2.3.4
class class class class class class class class class class class class class class class
0
6
5
4
2
0
6
5
4
2
0
6
5
4
2
max
max
low high
low
0.6 4 2.5
2.5
10
10
18
0
0
0
-8
-8
-8
0
0
0
-7
-7
-7
0
0
0
-5
-5
-5
0
0
0
-4
-4
-4
0
0
0
-2.5
-2.5
-2.5
10
10
10
9
9
9
5
5
5
4 2.5
4 2.5
4 2.5
18
30
50
30
50
80
0
0
0
-10
-12
-15
0
0
0
-8
-10
-12
0
0
0
-6
-8
-9
0
0
0
-5
-6
-7
0
0
0
-2.5
-2.5
-4
13 10
15 13
19 15
6
8
9
5 2.5
6 2.5
7 4
80
120
150
120
150
180
0
0
0
-20
-25
-25
0
0
0
-15
-18
-18
0
0
0
-10
-13
-13
0
0
0
-8
-10
-10
0
0
0
-5
-7
-7
180
250
315
250
315
400
0
0
0
-30
-35
-40
0
0
0
-22
-25
-30
0
0
0
-15
-18
-23
-12
400
500
630
500
630
800
0
0
0
-45
-50
-75
0
0
-35
-40
800
1,000
1,250
1,600
1,000
1,250
1,600
2,000
0
0
0
0
-100
-125
-160
-200
max
7
7
7
4
4
4
3
3
3
2.5
2.5
2.5
6
6
6
5
5
5
4
4
4
3
3
3
2.5
2.5
2.5
10 8
12 10
19 15
5
6
7
4
5
5
2.5 8
2.5 9
4
11
6
8
9
5
6
7
4
5
5
2.5
2.5
4
25 19 10 8 5
31 23 13 10 7
31 23 13 10 7
25 19 8
31 23 10
31 23 10
6
8
8
5
7
7
15 11 8
19 14 10
19 14 10
6
8
8
5
7
7
-8
38 28 15 12 8
44 31 18
50 38 23
38 28 12 9 8
44 31 14
50 38 18
23 17 12 9 8
26 19 14
30 23 18
56 44
63 50
94
56 44
63 50
94
34 26
38 30
55
125
155
200
250
8
8
8
125
155
200
250
75
94
120
150
1 The dimensional difference ds of bore diameter to applied for class 4 and 2 is the same as the tolerance of dimentional difference dmp of average bore diameter.
However, the dimensional difference is applied to diameter series 0, 1, 2, 3 and 4 against Class 4, and to all the diameter series against Class 2.
Table 6.3 (2) Outer rings

Nominal
outside
diameter
Single plane mean outside diameter deviation
Dmp
mm
class 0
over
class 6
incl.
high
6
18
30
0
0
0
-8
-8
-9
0
0
0
-7
-7
-8
30
50
80
50
80
120
0
0
0
-11
-13
-15
0
0
0
120
150
180
150
180
250
0
0
0
-18
-25
-30
250
315
400
315
400
500
0
0
0
500
630
800
630
800
1,000
1,000
1,250
1,600
2,000
1,250
1,600
2,000
2,500
2.5
6
18
VDp
open type
Single radial plane outside diameter variation
low high
class 5
low high
class 4
class 2
diameter series 9
maxdiameter series 0.1
maxdiameter series 2.3.4
class class class class class class class class class class class class class class class
0
6
5
4
2
0
6
5
4
2
0
6
5
4
2
low high
low high
low
max
0
0
0
-5
-5
-6
0
0
0
-4
-4
-5
0
0
0
-2.5
-2.5
-4
10 9
10 9
12 10
-9
-11
-13
0
0
0
-7
-9
-10
0
0
0
-6
-7
-8
0
0
0
-4
-4
-5
14 11 7
16 14 9
19 16 10
0
0
0
-15
-18
-20
0
0
0
-11
-13
-15
0
0
0
-9
-10
-11
0
0
0
-5
-7
-8
-35
-40
-45
0
0
0
-25
-28
-33
0
0
0
-18
-20
-23
0
0
-13
-15
0
0
-8
-10
0
0
0
-50
-75
-100
0
0
0
-38
-45
-60
0
0
-28
-35
0
0
0
0
-125
-160
-200
-250
max
max
7
7
8
4
4
5
3 2.5
3 2.5
4 4
11 9
13 11
19 16
5
7
8
23 19 11 9 5
31 23 13 10 7
38 25 15 11 8
23 19 8
31 23 10
38 25 11
44 31 18 13 8
50 35 20 15 10
56 41 23
44 31 14 10 8
50 35 15 11 10
56 41 17
26 19 14 10 8
30 21 15 11 10
34 25 17
63 48 28
63 48 21
94 56 35
94 56 26
125 75 125 75
38 29 21
55 34 26
75 45
155
200
250
310
5
5
6
4 2.5
4 2.5
5 4
6 4
7 4
8 5
8
8
9
155
200
250
310
5
5
6
4
4
5
3
3
4
2.5
2.5
4
5 4
5 4
6 5
8 7
10 8
11 10
5
7
8
5
5
6
4
4
5
7 5
8 7
8 8
14 11 8
19 14 10
23 15 11
7
8
8
5
7
8
6
6
7
94
120
150
190
5 The dimensional difference Ds of outer diameter to be applied for classes 4 and 2 is the same as the tolerance of dimensional difference Dmp of average outer
diameter. However, the dimensional difference is applied to diameter series 0, 1, 2, 3 and 4 against Class 4, and also to all the diameter series against Class 2.
A-34
Bearing Tolerances
Unitm
Mean single plane

bore diameter variation
Inner ring
radial runout
Face runout
with bore
Vdmp
Kia
Sd
Inner ring width deviation
Inner ring
axial runout
(with side)
Sia
Bs
VBs
normal
class class class class class
0
6
5
4
2

0
6
5
4
2
max
max
6
6
6
5
5
5
3 2
3 2
3 2
8
9
11
6
8
9
3 2.5 1.5
4 3 1.5
5 3.5 2
5 4
7 5
7 5
15 11
19 14
19 14
class class class

5
4
2
1.5
1.5
1.5
2.5
3.5
3.5
class 0,6
class class class

5
4
2
high
class 2 class 0,6 class 5,4
low high low high low

0
6
5
4
2
high low high low
max
7
7
7
3 1.5
3 1.5
3 1.5
7
7
7
3
3
3
1.5
1.5
1.5
0
0
0
-40 0
-120 0
-120 0
-40
-40
-80
0 -250
0 -250 0 -250
0 -250 0 -250
12 12 5 2.5 1.5
15 15 5 2.5 1.5
20 20 5 2.5 1.5
13 8
15 10
20 10
4 3
5 4
5 4
2.5
2.5
2.5
8
8
8
4 1.5
4 1.5
5 1.5
8
8
8
4
4
5
2.5
2.5
2.5
0
0
0
-120 0 -120 0 -120

-120 0 -120 0 -120
-150 0 -150 0 -150
0 -250 0 -250
0 -250 0 -250
0 -380 0 -250
20 20 5 2.5 1.5
20 20 5 3 1.5
25 25 6 4 1.5
25 13
30 18
30 18
6 5
8 6
8 6
2.5
2.5
5
9
10
10
5 2.5
6 2.5
6 4
9
10
10
5
7
7
2.5
2.5
5
0
0
0
-200 0 -200 0 -200

-250 0 -250 0 -250
-250 0 -250 0 -250
0 -380 0 -380
0 -500 0 -380
0 -500 0 -380
25 25 7 4
30 30 8 5
30 30 8 5
5
6
7
max
modified
class 5,4
4 2.5 1.5
4 2.5 1.5
4 2.5 1.5
10
10
10
max
Inner ring width

varietion
-40 0
-40 0
-80 0
2.5
2.5
4
23 17 8 6 4
26 19 9
30 23 12
40 20 10 8 5
50 25 13
60 30 15
11 7 5
13
15
13
15
20
0
0
0
-300 0 -300 0 -300

-350 0 -350
-400 0 -400
0 -500 0 -500
0 -500 0 -500
0 -630 0 -630
30 30 10 6 5
35 35 13
40 40 15
34 26
38 30
55
65 35
70 40
80
0
0
0
-450
-500
-750
50 45
60 50
70
0
0
0
0
75
94
120
150
90
100
120
140
-1,000
-1,250
-1,600
-2,000
80
100
120
140
2 To be applied for deep groove ball bearing and angular contact ball bearings.
3 To be applied for individual raceway rings manufactured for combined bearing use.
4 Nominal bore diameter of bearings of 0.6 mm is included in this dimensional division.
Unit m
Single radial plane

outside diameter
variation VDp 6
capped bearings
diameter series
2,3,4 0,1,2,3,4
class 0
class 6
max
Mean single plane

outside diameter
variation
VDmp
class
0
class
6
class
5
class
4
class
2
Outer ring radial runout Outside surface

inclination
Kea
Outside ring
axial runout
Sea 7
SD
Outer ring
width
deviation
Outer ring width

variation
VCs
Cs
class
0
class
6
max
class
5
class
4
class
2
class
5
max
class
4
class
2
class
5
max
class
4
class 0,6
class
2
all type
max
class
5
class
4
class
2
max
5
5
6
3
3
3
1.5
2
1.5
2
2.5 2
15
15
15
5
5
6
3
3
4
1.5
1.5
2.5
8
8
8
4
4
4
1.5
1.5
1.5
8
8
8
5
5
5
1.5
1.5
2.5
13
16
20
8 7
10 8
11 10
4
5
5
2
3
3.5 2
2.5
4
20 10 7
25 13 8
35 18 10
5
5
6
2.5
4
5
8
8
9
4
4
5
1.5
1.5
2.5
8
10
11
5
5
6
2.5
4
5
30
38
25
30
14 11
19 14
23 15
6
7
8
5
5
6
2.5
3.5
4
40 20 11 7
45 23 13 8
50 25 15 10
5
5
7
10
10
11
5
5
7
2.5
2.5
4
13
14
15
7
8
10
5
5
7
8 5
8 5
10 7
26 19 9
30 21 10
34 25 12
7
8
4
5
60 30 18 11
70 35 20 13
80 40 23
7
8
13
13
15
8
10
5
7
18
20
23
10
13
7
8
11 7 5
13 8 7
15
38 29 14
55 34 18
75 45
100 50 25
120 60 30
140 75
18
20
25
30
18
20

160
190
220
250
10
10
12
9
9
10
16
20
26
6
6
7
94
120
150
190
8
8
9
6 To be applied in case snap rings are not installed on the bearings.

7 To be applied for deep groove ball bearings and angular contact ball bearings.
8 Nominal outer diameter of bearings of 2.5 mm is included in this dimensional division.
A-35
Identical to
Bs of inner
ring of same
bearing
Identical to
Bs and VBs
of inner
ring of
same
bearing
5 2.5 1.5
5 2.5 1.5
5 2.5 1.5
5 2.5 1.5
6 3 1.5
8 4 2.5
2.5
2.5
4
Bearing Tolerances
Table 6.4 Tolerance of tapered roller bearings (Metric system)

Nominal
bore
diameter
Single plane mean bore

diameter deviation
Single radial plane

Mean single plane

dmp
Vdp
Vdmp
Inner ring radial runout

Kia
Face
runout
with bore
Sd
mm
class 0,6X
class 5,6
over incl.
class 4
class
0,6X
class
6
max
class
5
class
4
class
0,6X
class
6
max
class
5
class
4
class
0,6X
class
6
max
class
5
class
4
max
class class
5
4
max
10
18
30
18
30
50
0
0
0
-12
-12
-12
0
0
0
-7
-8
-10
0
0
0
-5
-6
-8
12
12
12
7
8
10
5
6
8
4
5
6
9
9
9
5
6
8
5
5
5
4
4
5
15
18
20
7
8
10
5
5
6
3
3
4
7
8
8
3
4
4
50
80
120
80
120
180
0
0
0
-15
-20
-25
0
0
0
-12
-15
-18
0
0
0
-9
-10
-13
15
20
25
12
15
18
9
11
14
7
8
10
11
15
19
9
11
14
6
8
9
5
5
7
25
30
35
10
13
18
7
8
11
4
5
6
8
9
10
5
5
6
180
250
315
250
315
400
0
0
0
-30
-35
-40
-22
-15
30
35
40
22
17
11
23
26
30
16
11
50
60
70
20
13
11
400
500
630
500
630
800
0
0
0
-45
-50
-75
45
50
75
34
38
56
80
90
105
800 1,000
-100
100
75
120
1 The dimensional difference ds of bore diameter to be applied for class 4 is the same as the tolerance of dimensional difference dmp of average bore diameter.

Nominal
outside
diameter
Single plane mean outside

diameter deviation
Dmp
mm
class 0,6X
class 5,6
class 4
Single radial plane

outside diameter
variation
Mean single plane

outside diameter
variation
VDp
VDmp
class
0,6X
class
6
class
5
class
4
class
0,6X
class
6
Outer ring radial runout

Kea
Outside
surface
inclination
SD
class
5
class
4
class
0,6X
class
6
class
5
class
4
class class
5
4
over
incl.
18
30
50
30
50
80
0
0
0
-12
-14
-16
0
0
0
-8
-9
-11
0
0
0
-6
-7
-9
12
14
16
8
9
11
6
7
8
5
5
7
9
11
12
6
7
8
5
5
6
4
5
5
18
20
25
9
10
13
6
7
8
4
5
5
8
8
8
4
4
4
80
120
150
120
150
180
0
0
0
-18
-20
-25
0
0
0
-13
-15
-18
0
0
0
-10
-11
-13
18
20
25
13
15
18
10
11
14
8
8
10
14
15
19
10
11
14
7
8
9
5
6
7
35
40
45
18
20
23
10
11
13
6
7
8
9
10
10
5
5
5
180
250
315
250
315
400
0
0
0
-30
-35
-40
0
0
0
-20
-25
-28
0
0
0
-15
-18
-20
30
35
40
20
25
28
15
19
22
11
14
15
23
26
30
15
19
21
10
13
14
8
9
10
50
60
70
25
30
35
15
18
20
10
11
13
11
13
13
7
8
10
400
500
630
500
630
800
0
0
0
-45
-50
-75
45
50
75
34
38
56
80
100
120
800
1,000
1,250
1,000
1,250
1,600
0
0
0
-100
-125
-160
100
125
160
75
84
120
140
165
190
max
max
max
max
max
2 The dimensional difference Ds of outside diameter to be applied for class 4 is the same as the tolerance of dimensional difference Dmp of average outside diameter.
3 The dimensional difference ds of bore diameter to be applied for class 4 is the same as the tolerance of dimensional difference dmp of average bore diameter.
A-36
Bearing Tolerances
Unitm
Overall width deviation of assembled single

Overall width deviation
Overall width deviation
row tapered roller bearing, or height deviation of assembled double rows of assembled four rows
Inner ring width deviation
Inner ring
axial runout
(with side)
Bs
tapered roller bearing or

height eviation
Ts
Sia
B1s,
class 4
class 0,6
class 6X
class 4,5
high low
high low
class 0,6
class 6X
class 4,5
C1s
B2s,
class 0,6,5
C2s
class 0,6,5
max
high
low
high
low
high
low
high
low
high
low
3
4
4
0
0
0
-120
-120
-120
0
0
0
-50
-50
-50
0
0
0
-200
-200
-240
+200
+200
+200
0
0
0
+100
+100
+100
0
0
0
+200
+200
+200
-200
-200
-200
+240
-240
4
5
7
0
0
0
-150
-200
-250
0
0
0
-50
-50
-50
0
0
0
-300
-400
-500
+200
+200
+350
0
-200
-250
+100
+100
+150
0
0
0
+200
+200
+350
-200
-200
-250
+300
+400
+500
-300
-400
-500
+500
+600
-500
-600
0
0
0
-300
-350
-400
0
0
0
-50
-50
-50
0 -600
+350
+350
+400
-250
-250
-400
+150
+200
+200
0
0
0
+350
-250
+600
+700
+800
-600
-700
-800
+750
+900
+1,000
-750
-900
-1,000
0
0
0
-450
-500
-750
+900
+1,000
+1,500
-900
-1,000
-1,500
+1,200
+1,200
+1,500
-1,200
-1,200
-1,500
-1,000
+1,500
-1,500
+1,500
-1,500
Unitm
Outer ring axial

runout
Outer ring width deviation

Cs
Sea
class 4
class 0,6,5,4
class 6X
high low
tapered roller bearing

or height eviation
Table 6.4 (3) Effective width of outer and inner rings with roller
Nominal
bore
diameter
Effective width deviation

of roller and inner ring assembly
of tapererd roller bearing
T1s
Unitm
Tapered roller bearing outer

ring effective width deviation
T2s
mm
class 0
class 0
class 6X
inf.
high
low
high
low
high
low
0
0
0
-100
-100
-100
10
18
30
18
30
50
+100
+100
+100
0
0
0
+50
+50
+50
0
0
0
+100
+100
+100
0
0
0
+50
+50
+50
0
0
0
0
0
0
-100
-100
-100
50
80
120
80
120
180
+100
+100
+150
0
-100
-150
+50
+50
+50
0
0
0
+100
+100
+200
0
-100
-100
+50
+50
+100
0
0
0
10
10
13
0
0
0
-100
-100
-100
180
250
315
250
315
400
+150
+150
+200
-150
-150
-200
+50
+100
+100
0
0
0
+200
+200
+200
-100
-100
-200
+100
+100
+100
0
0
0
0
0
-100
-100
max
5
5
5
6
7
8
sup.
inf. sup.
Identical to Bs
inner ring of
same bearing
T1
incl.
class 6X
over
Master cup
sub-unit
T2
Master cone
sub-unit
4 To be applied for nominal bore diameters
A-37
high low
Bearing Tolerances
Table 6.5 Tolerance for tapered roller bearings of inch system

Unitm
Nominal bore diameter
Single bore diameter deviation
ds
mm
over
Class 2
Class 4
Class 3
Class 0
Class 00
incl.
high
low
high
low
high
low
high
low
high
low
76.2
266.7
76.2
266.7
304.8
+13
+25
+25
0
0
0
+13
+25
+25
0
0
0
+13
+13
+13
0
0
0
+13
+13
+13
0
0
0
+8
+8
0
0
304.8
609.6
914.4
609.6
914.4
1,219.2
+51
+76
+102
0
0
0
+51
+25
+38
+51
0
0
0
+127
+76
1,219.2
Unitm
Nominal outside diameter
Single outside diameter deviation
Ds
mm
over

266.7
304.8
609.6
914.4
1,219.2
Class 2
Class 4
Class 3
Class 0
over
incl
over
incl
over
incl
over
incl
over
incl
266.7
304.8
609.6
+25
+25
+51
0
0
0
+25
+25
+51
0
0
0
+13
+13
+25
0
0
0
+13
+13
0
0
+8
+76
+102
+127
0
0
0
+76

+38
+51
+76
0
0
0
914.4
1,219.2

Table 6.5 (3) Effective width of inner rings with roller and outer rings
Nominal
bore
diameter
Overall width deviation of assembled single row tapered roller bearing

Ts
d
mm
101.6
304.8
101.6
609.6
304.8
304.8
609.6
609.6
Class 00
incl.
+203
+356
+381
+381
+381
Table 6.5 (4) Radial deflection of inner and outer rings
A-38
Bearing Tolerances
Master cup
sub-unit
T1
Master cone
sub-unit
T2
Unitm
Effective width deviation of roller and inner

ring assembly of tapered roller bearing
Tapered roller bearing outer ring effective width deviation

T2s
T1s
Class 4
high
Class 2
low
+102
+152
0
-152
high
+102
+102
+178
Class 3
low
0
0
1
-178
high
+102
+102
+102
Class 4
low
high
-102
-102
1
-102
+102
+203
0
-102
1 To be applied for nominal bore diameters of 406.400 mm (16 inch) or less.
A-39
Class 2
low
Class 3
high
low
high
low
+102
+102
+203
0
0
1
-203
+102
+102
+102
-102
-102
1
-102
Bearing Tolerances
Table 6.6 Tolerance of tapered roller bearings of J series (Metric system)

Nominal
bore
diameter
dmp
Single radial plane bore

diameter variation
Mean single plane bore

diameter variation
Vdp
Vdmp
d
mm
Class
Class
Class
Class
Class
Class
Class
Class
Class
Class
Class
Class
over
incl.
high
low
high
low
high
low
high
low
10
18
30
18
30
50
0
0
0
-12
-12
-12
0
0
0
-12
-12
-12
0
0
0
-7
-8
-10
0
0
0
-5
-6
-8
12
12
12
12
12
12
max
4
4
4
3
3
3
9
9
9
9
9
9
max
5
5
5
4
4
5
50
80
120
80
120
180
0
0
0
-15
-20
-25
0
0
0
-15
-20
-25
0
0
0
-12
-15
-18
0
0
0
-9
-10
-13
15
20
25
15
20
25
5
5
5
3
3
3
11
15
19
11
15
19
5
5
5
5
5
7
180
250
-30
-30
-22
-15
30
30
23
23
Note: Please consult NTN Engineering for Class A bearings.

Nominal
outside
diameter
Single radial plane outside Mean single plane outside outer ring
diameter variation
axial runout
diameter variation
Dmp
VDmp
VDp
D
mm
Class
Class
Class
Class
Class Class Class Class

K
Sea
Class Class Class Class
max
Class
over
incl.
high
low
high
low
high
low
high
low
18
30
50
30
50
80
0
0
0
-12
-14
-16
0
0
0
-12
-14
-16
0
0
0
-8
-9
-11
0
0
0
-6
-7
-9
12
14
16
12
14
16
4
4
4
3
3
3
9
11
12
9
11
12
5
5
6
4
5
5
3
3
4
80
120
150
120
150
180
0
0
0
-18
-20
-25
0
0
0
-18
-20
-25
0
0
0
-13
-15
-18
0
0
0
-10
-11
-13
18
20
25
18
20
25
5
5
5
3
3
3
14
15
19
14
15
19
7
8
9
5
6
7
4
4
5
180
250
315
250
315
400
0
0
0
-30
-35
-40
0
0
0
-30
-35
-40
0
0
0
-20
-25
-28
0
0
0
-15
-18
-20
30
35
40
30
35
40
6
8
10
4
5
5
23
26
30
23
26
30
10
13
14
8
9
10
6
6
6
max
max
Table 6.6 (3) Effective width of inner and outer rings

Nominal
bore
diameter
d
Tapered roller bearing outer ring

effective width deviation
T2s
Effective width deviation of roller and inner ring

assembly of tapered roller bearing
T1s
Class
mm
Unitm
Class
Class
Class
Class
over
incl.
high
low
high
low
high
low high
10
80
120
80
120
180
+100
+100
+150
0
-100
-150
+50
+50
+50
0
0
0
+100
+100
+100
-100
-100
-100
180
250
+150
-150
+50
+100
-150
Class
Class
Class
low
high
low
high
low
high
low high
*
*
*
*
*
*
+100
+100
+200
0
-100
-100
+50
+50
+100
0
0
0
+100
+100
+100
-100
-100
-150
*
*
*
*
*
*
+200
-100
+100
+100
-150
Note 1: "*" mark are to be manufactured only for combined bearings.

2: Please consult NTN Engineering for Class A bearings.
A-40
low
Bearing Tolerances
Unitm
Overall width deviation of assembled

single row tapered roller bearing
Inner ring
axial runout
(with side)
Ts
Sia
Class
Class
Class
Class
Class
max
sup
inf
sup
3
4
4
+200
+200
+200
inf
0 +100
0 +100
0 +100
sup
0
0
0
+200
+200
+200
-200 +200
-200 +200
-200 +200
inf
sup
-200
-200
-200
inf
4
5
7
+200
+200
+350
0 +100
-200 +100
-250 +150
0
0
0
+200
+200
+200
-200 +200
-200 +200
-250 +200
-200
-200
-250
+350
-250 +150
+200
-300 +200
-300
Table 6.6 (4) Runout of inner and outer rings Unitm

Nominal
outside
diameter
Inner ring radial runoutKia

and
Outer ring radial runoutKea
D
mm
Class
Class
Class
Class
max
over
incl.
18
30
50
30
50
80
18
20
25
18
20
25
5
6
6
3
3
4
80
120
150
120
150
180
35
40
45
35
40
45
6
7
8
4
4
4
180
250
315
250
315
400
50
60
70
50
60
70
10
11
13
5
5
5
A-41
Bearing Tolerances
Table 6.7 Tolerance of thrust ball bearings

Nominal
bore
diameter
Unitm

dmp
Single radial plane

Thrust bearing shaft washer raceway
bore diameter variation (or center washer raceway) thickness variation
Vdp
d
mm
Si
Class
Class
Class
Class
Class
Class
Class
Class
0,6,5
0,6,5
over
incl.
high
low
high
low
18
30
18
30
50
0
0
0
-8
-10
-12
0
0
0
-7
-8
-10
6
8
9
max
5
6
8
10
10
10
5
5
6
max
3
3
3
2
2
2
50
80
120
80
120
180
0
0
0
-15
-20
-25
0
0
0
-12
-15
-18
11
15
19
9
11
14
10
15
15
7
8
9
4
4
5
3
3
4
180
250
315
250
315
400
0
0
0
-30
-35
-40
0
0
0
-22
-25
-30
23
26
30
17
19
23
20
25
30
10
13
15
5
7
7
4
5
5
400
500
500
630
0
0
-45
-50
0
0
-35
-40
34
38
26
30
30
35
18
21
9
11
6
7

Nominal
outside
diameter
Unitm

Dmp
Single radial plane

outside diameter
variation
Thrust bearing housing washer raceway

thickness variation
Se
VDp
mm
Class
Class
Class
Class
Class
Class
Class
Class
0,6,5
0,6,5
over
incl.
high
low
high
low
max
10
18
30
18
30
50
0
0
0
-11
-13
-16
0
0
0
-7
-8
-9
8
10
12
5
6
7
50
80
120
80
120
180
0
0
0
-19
-22
-25
0
0
0
-11
-13
-15
14
17
19
8
10
11
180
250
315
250
315
400
0
0
0
-30
-35
-40
0
0
0
-20
-25
-28
23
26
30
15
19
21
400
500
630
500
630
800
0
0
0
-45
-50
-75
0
0
0
-33
-38
-45
34
38
55
25
29
34
Table 6.7 (3) Height of bearings center washer

Unitm
Nominal
bore
diameter
Single direction type 1

Ts
d
mm
over
incl.
high
low
30
50
30
50
80
0
0
0
-75
-100
-125
80
120
180
120
180
250
0
0
0
-150
-175
-200
250
315
400
500
315
400
500
630
0
0
0
0
-225
-300
-350
-400
1 This standard is applied for flat back face bearing of class 0.
A-42
max
According to the tolerance

of S1 against "d" or "d2"
of the same bearings
Bearing Tolerances
Table 6.8 Tolerance of spherical thrust roller bearing

Nominal
bore diameter
d
mm
over
incl.
Table 6.8 (2) Outer ring

Unitm
Unitm
Single plane mean Single radial Face

bore diameter deviation plane bore runout
diameter with bore
variation
dmp
Sd
Vdp
high
low
max
max
Nominal
outside diameter
Height deviation of
single direction
thrust bearing
Ts
Single plane mean

outside diameter
deviation
mm
Dmp
high
low
over
incl.
high
low
50
80
120
80
120
180
0
0
0
-15
-20
-25
11
15
19
25
25
30
+150
+200
+250
-150
-200
-250
120
180
250
180
250
315
0
0
0
-25
-30
-35
180
250
315
250
315
400
0
0
0
-30
-35
-40
23
26
30
30
35
40
+300
+350
+400
-300
-350
-400
315
400
500
400
500
630
0
0
0
-40
-45
-50
400
500
-45
34
45
+450
-450
630
800
800
1,000
0
0
-75
-100
Table 6.9 Tolerance of double direction type angular contact thrust ball bearings
Table 6.9 (1) Inner rings and bearing height
Nominal
bore diameter
d
mm
Class 5
Class 4
Inner ring axial
Unitm
Height deviation of single

direction thrust bearing
Sia
Inner ring
width variation
VBs
Class 5 Class 4
Class 5 Class 4
Class 5 Class 4
Class 5, Class 4
max
max
max
Single plane mean bore diameter Face runout

deviation dmp
with bore
Single bore diameter deviation ds
Sd
runout (with side)
over
incl.
high
low
high
low
18
30
50
30
50
80
0
0
0
-6
-8
-9
0
0
0
-5
-6
-7
8
8
8
4
4
5
5
5
6
3
3
5
5
5
6
80
120
180
120
180
250
0
0
0
-10
-13
-15
0
0
0
-8
-10
-12
9
10
11
5
6
7
6
8
8
5
6
6
250
315
315
400
0
0
-18
-23
0
0
-15
-18
13
15
8
9
10
13
8
10
Ts
high
low
2.5
3
4
0
0
0
-300
-400
-500
7
8
10
4
5
6
0
0
0
-600
-700
-800
13
15
7
9
0
0
-900
-1,000

Nominal
outside diameter
mm
Unitm
Single plane mean outside

diameter deviation Dmp
Single outside diameter
deviation Ds
Outside surface inclination
Outer ring axial runout
Outer ring width variation
SD
Sea
VCs
Class 5
Class 4
over
incl.
high
low
Class 5
Class 4
30
50
80
50
80
120
-30
-40
-50
-40
-50
-60
8
8
9
4
4
5
120
150
180
150
180
250
-60
-60
-75
-75
-75
-90
10
10
11
5
5
7
250
315
400
315
400
500
-90
-110
-120
-105
-125
-140
13
13
15
8
10
13
max
A-43
Class 5
Class 4
Class 5
max
According to
tolerance of Sia
against "d" of the
same bearings
Class 4
max
5
6
8
2.5
3
4
8
8
10
5
5
7
11
13
15
7
8
10
Bearing Tolerances
6.2 Chamfer measurements and tolerance or

allowable values of tapered hole
Bore diameter face rs min or r1s min

of bearing or outer
rs max or r1s max
diameter face of
bearing
(Axial direction)
(Radial direction)
rsmin or r smin
rs min or
r s min
Table 6.10 Allowable critical-value of bearing chamfer

Table 6.10 (1) Radial bearing (Except tapered roller bearing)
rsmax or r smax
Side face of inner

ring or center
washer, or side face
of outer ring
Table 6.10 (2) Tapered roller bearings of metric system

Unit mm
Unit mm
rs min
or
r1s min
Nominal
bore diameter
d
over
incl.
rs min2
rs max or r1s max

Radial
direction
Axial
direction
0.1
0.2
0.08
0.16
0.3
0.1
0.2
0.4
0.15
0.3
0.6
0.2
0.5
0.8
40
0.6
40
0.8
0.05
0.3
0.6
1.1
1.5
2.1
2.5
40
40
1.3
50
1.5
50
1.9
120
3.5
120
2.5
120
2.3
120
80
4.5
or
r1s min
0.3
0.6
1.5
2.5
Nominal bore
diameter of bearing
"d" or nominal
outside diameter "D"
rs max or r1s max
over
incl.
Radial
direction
Axial
direction
40
0.7
1.4
40
0.9
1.6
40
1.1
1.7
40
1.3
50
1.6
2.5
50
1.9
120
2.3
120
250
2.8
3.5
250
3.5
120
2.8
120
250
3.5
4.5
250
120
3.5
120
250
5.5
250
4.5
120
5.5
80
220
3.5
120
250
4.5
6.5
220
3.8
250
400
400
5.5
7.5
120
120
250
5.5
7.5
250
400
280
6.5
280
4.5
100
3.8
100
280
4.5
280
400
6.5
8.5
280
180
6.5
280
5.5
180
7.5
6.5
180
7.5
10
180
11
8
9
10
10
13
7.5
12.5
17
9.5
15
19
12
18
24
15
21
30
19
25
38
2 These are the allowable minimum dimensions of the chamfer dimension

"r" or "r1" and are described in the dimensional table.
3 Inner rings shall be in accordance with the division of "d" and outer rings
with that of "D".
Note: This standard will be applied to the bearings whose dimensional series
(refer to the dimensional table) are specified in the standard of ISO 355
or JIS B 1512. Further, please consult NTN Engineering for bearings
other than.
1 These are the allowable minimum dimensions of the chamfer dimension

"r" and are described in the dimensional table.
A-44
Bearing Tolerances
Table 6.10 (3) Thrust bearings
Table 6.11 (1) Tolerance and allowable values (Class 0) of

tapered hole of radial bearings
Unitm
dmp
d
mm
d1mp - dmp
Vdp 1
over
incl.
high
low
high
low
max
+ 22
+ 27
+ 33
0
0
0
+ 15
+ 18
+ 21
0
0
0
9
11
13
0.05
0.1
10
18
10
18
30
0.08
0.16
0.1
0.2
30
50
80
50
80
120
+ 39
+ 46
+ 54
0
0
0
+ 25
+ 30
+ 35
0
0
0
16
19
22
0.15
0.3
0.2
0.5
120
180
250
180
250
315
+ 63
+ 72
+ 81
0
0
0
+ 40
+ 46
+ 52
0
0
0
40
46
52
0.3
0.8
0.6
1.5
315
400
500
400
500
630
+ 89
+ 97
+110
0
0
0
+ 57
+ 63
+ 70
0
0
0
57
63
70
2.2
1.1
2.7
1.5
3.5
630
800
1,000
1,250
800
1,000
1,250
1,600
+125
+140
+165
+195
0
0
0
0
+ 80
+ 90
+105
+125
0
0
0
0
2.1
4.5
5.5
6.5
Table 6.11 (2) Allowable variations for radial bearing inner ring
tapered bores Standard taper ratio 1:30 (Class 0)
Units m
6
7.5
9.5
15
19
dmp
d
mm
12
d1mp - dmp
Vdp 1
over
incl.
over
below
over
below
max
50
80
120
80
120
180
+15
+20
+25
0
0
0
+30
+35
+40
0
0
0
19
22
40
180
250
315
250
315
400
+30
+35
+40
0
0
0
+46
+52
+57
0
0
0
46
52
57
+63
0
63
+45
0
400
500
+50
0
+70
0
70
500
630
21 -2.09382c4425.1332 T Tf8.00604 TD(0 -2.129143.091 408.779 m70 0Tj0 -27b38 TD9599)Tj0 -2.1832 T TD5.5
1 Applies to all radial flat planes of inner ring tapered bore.
2 Does not apply to diameter series 7 and 8.
Note: Quantifiers
1
For a standard taper ratio of 1:12d1dB
12
1
For a standard taper ratio of 1:30d1dB
30
dmp Dimensional difference of the average bore

diameter within the flat surface at the theoretical
small end of the tapered bore.
d1mp Dimensional difference of the average bore
diameter within the flat surface at the theoretical
large end of the tapered bore.
Vdp Unevenness of the bore diameter with the flat surface
B Nominal width of inner ring
Half of the tapered bores nominal taper angle
For a standard taper ratio of 1:122
23
9.4
For a standard taper ratio of 1:300
57
7.4
A-45
Bearing Tolerances
6.3 Bearing tolerance measurement methods
Table 6.12 shows some of the major methods of

measuring rotation tolerances.
For reference, measurement methods for rolling bearing

tolerances are in JIS B 1515.
Table 6.12 Rotation tolerance measurement methods
Characteristic tolerance
Measurement method
Measuring load
Measuring load
For inner ring radial runout,

record the total indicator
reading (TIR)
Inner ring radial runout

(Kia)
Measuring load
Measuring load
For outer ring radial runout,

record the total indicator reading
(TIR) after one revolution.
Outer ring radial runout

(Kea)
Measuring load
Measuring load
For inner ring axial runout,

(TIR) after rotating the inner ring
one revolution.
Inner ring axial runout

(Sia)
Measuring load
Measuring load
Outer ring axial runout

(Sea)
For inner ring side runout with

bore, record the total indicator
reading (TIR) after rotating the
inner ring one revolution with a
tapered mandrel.
Inner ring side

runout with bore
(Sd)
1.2rs max
Outer ring outside

surface inclination
(SD)
For outer ring axial runout,

(TIR) after rotating the inner ring
one revolution.
1.2rs max
Reinforcing
plate
A-46
For outer ring outside surface

inclination, record the total
indicator reading (TIR) after
aligning the ring with the
reinforcing plate and rotating it
one revolution.
Bearing Fits
7 Bearing Fits
Raceway and shaft or housing abrasion caused by
creeping and fretting corrosion
Seizing caused by loss of internal clearances
Increased noise and lowered rotational accuracy due
to raceway groove deformation
7.1 Interference
For rolling bearings, inner and outer rings are fixed on
the shaft or in the housing so that relative movement
does not occur between fitted surfaces during operation
or under load. This relative movement (referred to as
"creep") between the fitted surfaces of the bearing and
the shaft or housing can occur in a radial direction, an
axial direction, or in the direction of rotation. To help
prevent this creeping movement, bearing rings and the
shaft or housing are installed with one of three
interference fits, a "tight fit" (also called shrink fit),
"transition fit," or "loose fit" (also called clearance fit),
and the degree of interference between their fitted
surfaces varies.
The most effective way to fix the fitted surfaces
between a bearing's raceway and shaft or housing is to
apply a "tight fit." The advantage of this tight fit for thin
walled bearings is that it provides uniform load support
over the entire ring circumference without any loss of load
carrying capacity. However, with a tight fit, ease of
installation and disassembly is lost; and when using a
non-separable bearing as the floating-side bearing, axial
displacement is not possible. For this reason, a tight fit
cannot be recommended in all cases.
Please refer to insert pages A-93 - A94 for

information concerning diagnosis of these conditions.
7.3 Fit selection

Selection of a proper fit is dependent upon thorough
analysis of bearing operating conditions, including
consideration of:
Shaft and housing material, wall thickness, finished
surface accuracy, etc.
Machinery operating conditions (nature and
magnitude of load, rotational speed, temperature,
etc.)
7.3.1 "Tight fit," "transition fit," or "loose fit"
(1) For raceways under rotating loads, a tight fit is
necessary. (Refer to Table 7.1) "Raceways under
rotating loads" refers to raceways receiving loads
rotating relative to their radial direction. For raceways
under static loads, on the other hand, a loose fit is
sufficient.
(Example) Rotating inner ring load = the direction of
the radial load on the inner ring is rotating
relatively
(2) For non-separable bearings, such as deep groove ball
bearings, it is generally recommended that either the
inner ring or outer ring be given a loose fit.
7.2 The necessity of a proper fit

In some cases, improper fit may lead to damage and
shorten bearing life, therefore it is necessary to make a
careful analysis in selecting a proper fit. Some of the
negative conditions caused by improper fit are listed
below.
Raceway cracking, early peeling and displacement of
raceway
Table 7.1 Radial load and bearing fit
Illustration
Static
load
Ring load
Fit
Rotating inner
ring load
Inner ring :
Tight fit
Static outer
ring load
Outer ring :
Loose fit
Outer ring:
Rotating
Static inner
ring load
Inner ring :
Loose fit
Inner ring:
Rotating
Rotating outer
ring load
Outer ring :
Tight fit
Bearing rotation
Inner ring:
Rotatring
Outer ring:
Stationary
Unbalanced
load
Inner ring:
Stationary
Outer ring:
Rotating
Static
load
Unbalanced
load
Inner ring:
Stationary
Outer ring:
Stationary
A-47
Bearing Fits
7.3.2 Recommended Fits

Bearing fit is governed by the selection tolerances for
bearing shaft diameters and housing bore diameters.
Widely used fits for 0 Class tolerance bearings and
various shaft and housing bore diameter tolerances are
shown in Table 7.1.
Generally-used, standard fits for most types of bearings
and operating conditions are shown in Tables 7.2 - 7.7.
shown in formulae (7.1).

dT = 0.0015 d T (7.3)
dT : Required effective interference for
temperature difference m
T : Difference between bearing temperature
and ambient temperature C

d : Bearing bore diameter mm
(3) Fitted surface variation and required interference

Interference between fitted surfaces is reduced by
roughness and other slight variations of these surfaces
which are flattened in the fitting process. The degree of
reduced interference depends upon the finish treatment
of these surfaces, but in general it is necessary to
assume the following interference reductions.
For ground shafts: 1.02.5m
For lathed shafts: 5.07.0m
Table 7.2: Fits for radial bearings

Table 7.3: Fits for thrust bearings
Table 7.4: Fits for electric motor bearings
Table 7.6: Fits for inch series tapered roller bearings
(ANSI Class 4)
Table 7.7: Fits for inch series tapered roller bearings
(ANSI Class 3 and 0)
Table 7.5. shows fits and their numerical values.
For special fits or applications, please consult NTN
Engineering.
(4) Maximum interference

When bearing rings are installed with an interference fit,
tension or compression stress may occur along their
raceways. If interference is too great, this may cause
damage to the rings and reduce bearing life. For these
reasons, maximum interference should not exceed the
previously mentioned ratio of 1:1,000 of shaft or outside
diameter.
7.3.3 Interference minimum and maximum values

The following points should be considered when it is
necessary to calculate the interference for an application:
In calculating the minimum required amount of
interference keep in mind that:
1) interference is reduced by radial loads
2) interference is reduced by differences between
bearing temperature and ambient temperature
3) interference is reduced by variation of fitted
surfaces
Maximum interference should be no more than
1:1000 of the shaft diameter or outer diameter.
Required interference calculations are shown below.
7.3.4 Other details

(1) Tight interference fits are recommended for,
Operating conditions with large vibration or shock
loads
Applications using hollow shafts or housings with
thin walls
Applications using housings made of light alloys or
plastic
(1) Radial loads and required interference

Interference between inner rings mounted on solid
shafts is reduced when acted upon by radial loads.
Calculation of the minimum required amount of
interference in such cases is shown in formulae (7.1) and
(7.2).
Fr 0.3 Cor
1/2
dF = 0.08 (dFr / B)
1/2
= 0.25 (dFr / B)
Fr 0.3 Cor
dF = 0.02 (Fr / B)
= 0.2 (Fr / B)
(2) Loose interference fits are preferable for,

Applications requiring high running accuracy
Applications using small sized bearings or thin
walled bearings
N
kgf
Housing
(7.1)
G6
G7
H7
Class 0
N
kgf
(7.2)
H8
H6
J6 J7
K6 K7
Dmp
M6 M7
N6 N7
Where,
P6 P7
dF : Required effective interference for load m

d : Nominal bore diameter mm
B : Inner ring width mm
Fr : Radial load Nkgf
Cor : Basic static rated load Nkgf
Loose fit
Transition fit
Tight fit
Types of fits
Tight fit
Transition fit
p6
(2) Temperature difference and required interference

Interference between inner rings and steel shafts is
reduced as a result of temperature increases (difference
between bearing temperature and ambient temperature,
T) caused by bearing rotation. Calculation of the
minimum required amount of interference in such cases is
Class 0
k5
h5 h6
dmp
J5
J6
g5 g6
Shafts
Fig 7.1
A-48
k6
m5 m6
n5 n6
Bearing Fits
(3) Consideration must also be given to the fact that fit

selection will effect internal bearing clearance
selection. (refer to page insert A-56)
(4) A particular type of fit is recommended for SL type

cylindrical roller bearings.
Table 7.2 General standards for radial bearing fits (JIS Class 0, 6, 6X)
Table 7.2 (1)
Load
Nature
conditions,
Fit
of load
magnitude
Tight fit / Transition fit
Indeterminate direction load

Rotating inner ring load
Light or 1
fluctuating
variable load
Normal load
Load conditions, magnitude

Ball bearing
Static inner
ring load
Transition fit
Centric axial
load only
Transition fit
Inner ring axial

displacement
unnecessary
All loads
Tolerance
class
Shaft diameter
mm
over
incl
Tolerance
class
18
18 100
100 200
h5
js6
k6
40
40 140
140 200
js6
k6
m6
18
100
140
200
js5
k5
m5
m6
n6
40
100
140
200
40
100
140
200
400
k5
m5
m6
n6
p6
40
65
100
140
280
40
65
100
140
280
500
k5
m5
m6
n6
p6
r6
Alteration of inner clearances to accommodate

fit is not a consideration with single-row angular
contact bearings and tapered roller bearings.
Therefore, k5 and m5 may be substituted for
k6 and m6.
50 140
140 200
200
n6
p6
r6
50 100
100 140
140 200
n6
p6
r6
Use bearings with larger internal clearances

than CN clearance bearings.
g6
When greater accuracy is required use g5.

For large bearings, f6 may be used.
h6
When greater accuracy is required use h5.
js6
General; depending on the fit, shaft and inner

rings are not fixed.
18
100
140
200
280
g6
All shaft
diameters
All shaft
diameters
js6
All shaft
diameters
h6
All shaft
diameters
Tolerance
class
When greater accuracy is required js5, k5, and
m5 may be substituted for js6, k6, and m6.
g6
h6
All shaft
diameters
Shaft diameter
mm
over
incl
Remarks
Shaft diameter
mm
over
incl
Heavy 1
load or
shock load
Inner ring axial
displacement
possible

js6
All shaft
diameters
Table 7.2 (2) Fit with shaft (fits for tapered bore bearings (Class 0) with adapter assembly/withdrawal sleeve)
All loads
All bearing types
All shaft diameters
Tolerance
class
h9 / IT5 2
h10 / IT7
1 Standards for light loads, normal loads, and heavy loads

Light loads: equivalent radial load 0.06 Cr
Normal loads: 0.06 Cr equivalent radial load 0.12 Cr
Heavy loads: 0.12 Cr equivalent radial load
2 IT5 and IT7 show shaft roundness tolerances, cylindricity tolerances, and related values.
Note: All values and fits listed in the above tables are for solid steel shafts.
A-49
General applications
Transmission shafts, etc.
Bearing Fits
Table 7.2 (3) Housing fits
Nature Housing Fit

of load
Load conditions, magnitude
Tolerance
class
Outer ring axial

displacement 2
Remarks
Loose fit
Transition
or loose fit
Rotating outer ring load or

static outer ring load
Solid or split
housing
G7 also acceptable for large type

bearings as well as outer rings and
housings with large temperature differences.
H7
Displacement possible
G7
Easy displacement
H8
Shaft and inner rings

reach high temperature
G7
Easy displacement
F7
Easy displacement
Requires silent operation
H6
Js6
Displacement not possible

(in principle)
Applies primarily to ball bearings
K6

(in principle)
Applies primarily to roller bearings
All loads
Light
to normal load
High rotation accuracy

required with light to
normal loads
Tight to
transition fit
Tight fit
Solid housing
Direction
Inner ring static
indeterminate
load or outer
load
ring rotating load
Light to normal load
Js7
F7 also acceptable for large type bearings as

well as outer rings and housings with large
temperature differences.
When greater accuracy is required
substitute Js6 for Js7 and K6 for K7.
Normal to heavy load
K7

(in principle)
Heavy shock load
M7
Light or variable load
M7
Normal to heavy load
N7
Applies primarily to ball bearings
Heavy load (thin wall housing)

or heavy shock load
P7
Applies primarily to roller bearings
Loose fit
Centered axial
load only - Loose fit
Select a tolerance class that will

provide clearance between outer
ring and housing.
1 Standards for light loads, normal loads, and heavy loads

Light loads: equivalent radial load 0.06 Cr
Normal loads: 0.06 Cr equivalent radial load 0.12 Cr
Heavy loads: 0.12 Cr equivalent radial load
2 Indicates whether or not outer ring axial displacement is possible with non-separable type bearings.
Note 1: All values and fits listed in the above tables are for cast iron or steel housings.
2: In cases where only a centered axial load acts on the bearing, select a tolerance class that will provide clearance in the axia
direction for the outer ring.
A-50
Bearing Fits
Table 7.3 Standard fits for thrust bearings (JIS Class 0 and 6)
Table 7.3 (1) Shaft fits
Load conditions
Fit
Shaft diameter
mm
over incl
Tolerance class
All thrust bearings
Centered axial load only
Transition fit
All sizes
js6 or h6
Inner ring static load
Transition fit
All sizes
js6
Inner ring rotating load

or
direction indeterminate load
Transition fit
200
200 400
400
k6 or js6
m6 or k6
n6 or m6
Self-aligning roller
thrust bearings
Combined load
Bearing type
Tight fit
Table 7.3 (2) Housing fits

Bearing type
Load conditions
All thrust
bearings
Centered axial load only
Remarks
Select a tolerance class that will provide clearance between outer ring and housing.
Loose fit
Combined load
Self-aligning
roller thrust
bearings
Tolerance
class
Fit
H8
Greater accuracy required with thrust ball bearings
Outer ring static load
H7
Direction Indeterminate
Transition fit
load or outer ring
rotating load
K7
Normal operating conditions
M7
For relatively large radial loads
Note: All values and fits listed in the above tables are for cast iron or steel housings.
Table 7.4 Fits for electric motor bearings

Bearing type
Shaft fits
Shaft diameter mm
Tolerance class
Over incl.
Housing bore diameter

Housing fits
Tolerance class
Deep groove
ball bearings
18
18 100
100 160
j5
k5
m5
All sizes
H6
or
J6
Cylindrical
roller bearings
40
40 160
160 200
k5
m5
n6
All sizes
H6
or
J6
A-51
Bearing Fits
Table 7.5 Numeric value table of fitting for radial bearing of 0 class
Table 7.5 (1) Fitting against shaft
Nominal bore
diameter of
bearing
Single plane1
mean bore
diameter
deviation
g5
bearing
g6
shaft
bearing
h5
shaft
bearing
h6
shaft
bearing
j5
shaft
bearing
js5
shaft
bearing
j6
shaft
bearing
shaft
dmp
d
mm
over
incl
high
low
-8
4T 9L
4T 12L
8T 5L
8T 8L
11T 2L
10.5T 2.5L
14T 2L
10
-8
3T 11L
3T 14L
8T 6L
8T 9L
12T 2L
11T 3L
15T 2L
10
18
-8
2T 14L
2T 17L
8T 8L
8T 11L
13T 3L
12T 4L
16T 3L
18
30
-10
3T 16L
3T 20L
10T 9L
10T 13L
15T 4L
14.5T 4.5L
19T 4L
30
50
-12
3T 20L
3T 25L
12T 11L
12T 16L
18T 5L
17.5T 5.5L
23T 5L
50
80
-15
5T 23L
5T 29L
15T 13L
15T 19L
21T 7L
21.5T 6.5L
27T 7L
80
120
-20
8T 27L
8T 34L
20T 15L
20T 22L
26T 9L
27.5T 7.5L
33T 9L
120
140
160
140
160
180
-25
11T32L
11T 39L
25T 18L
25T25L
32T11L
34T 9L
39T11L
180
200
225
200
225
250
-30
15T35L
15T 44L
30T 20L
30T29L
37T13L
40T 10L
46T13L
250
280
280
315
-35
18T40L
18T 49L
35T 23L
35T32L
42T16L
46.5T11.5L
51T16L
315
355
355
400
-40
22T43L
22T 54L
40T 25L
40T36L
47T18L
52.5T12.5L
58T18L
400
450
450
500
-45
25T47L
25T 60L
45T 27L
45T40L
52T20L
58.5T13.5L
65T20L
J7
Js7
K6
1 Above table is not applicable to tapered roller bearings whose bore diameter is 30mm or less.
Table 7.5 (2) Fitting against housing

Nominal
outside
diameter of
bearing
Single plane 2
mean outside
diameter
deviation
Dmp
G7
housing
bearing
H6
housing
bearing
H7
housing
bearing
J6
housing
bearing
housing
bearing
housing
bearing
housing
bearing
mm
over
incl
high.
low.
10
-8
5L 28L
0 17L
0 23L
4T 13L
7T 16L
7.5T15.5L
7T 10L
10
18
-8
6L 32L
0 19L
0 26L
5T 14L
8T 18L
9T 17L
9T 10L
18
30
-9
7L 37L
0 22L
0 30L
5T 17L
9T 21L
10.5T19.5L
11T 11L
30
50
-11
9L 45L
0 27L
0 36L
6T 21L
11T 25L
12.5T23.5L
13T 14L
50
80
-13
10L 53L
0 32L
0 43L
6T 26L
12T 31L
15T 28L
15T 17L
80
120
-15
12L 62L
0 37L
0 50L
6T 31L
13T 37L
17.5T32.5L
18T 19L
120
150
-18
14L 72L
0 43L
0 58L
7T 36L
14T 44L
20T 38L
21T 22L
150
180
-25
14L 79L
0 50L
0 65L
7T 43L
14T 51L
20T 45L
21T 29L
180
250
-30
15L 91L
0 59L
0 76L
7T 52L
16T 60L
23T 53L
24T 35L
250
315
-35
17L104L
0 67L
0 87L
7T 60L
16T 71L
26T 61L
27T 40L
315
400
-40
18L115L
0 76L
0 97L
7T 69L
18T 79L
28.5T68.5L
29T 47L
400
500
-45
20L128L
0 85L
0108L
7T 78L
20T 88L
31.5T76.5L
32T 53L
2 Above table is not application to tapered roller bearings whose outside diameter is 150mm or less.
Note: T = tight, L = loose
A-52
Bearing Fits
Unitm
js6
k5
bearing
shaft
k6
bearing
shaft
m5
bearing
shaft
bearing
m6
shaft
n6
bearing
shaft
bearing
p6
shaft
bearing
r6
shaft
bearing
shaft
Nominal bore
diameter of
bearing
d
mm
over
incl.
12T 4L
14T 1T
17T 1T
17T 4T
20T 4T
24T 8T
28T 12T
12.5T 4.5L
15T 1T
18T 1T
20T 6T
23T 6T
27T10T
32T 15T
10
13.5T 5.5L
17T 1T
20T 1T
23T 7T
26T 7T
31T12T
37T 18T
10
18
16.5T 6.5L
21T 2T
25T 2T
27T 8T
31T 8T
38T15T
45T 22T
18
30
20T 8L
25T 2T
30T 2T
32T 9T
37T 9T
45T17T
54T 26T
30
50
24.5T 9.5L
30T 2T
36T 2T
39T11T
45T11T
54T20T
66T 32T
50
80
31T 11L
38T 3T
45T 2T
48T13T
55T13T
65T23T
79T 37T
80
120
120
140
160
140
160
180
37.5T12.5L
46T3T
53T3T
58T15T
65T15T
77T27T
93T43T
113T 63T
115T 65T
118T 68T
44.5T14.5L
54T4T
63T4T
67T17T
76T17T
90T31T
109T50T
136T 77T
139T 80T
143T 84T
180
200
225
200
225
250
51T 16L
62T4T
71T4T
78T20T
87T20T
101T34T
123T56T
161T 94T
165T 98T
250
280
280
315
58T 18L
69T4T
80T4T
86T21T
97T21T
113T37T
138T62T
184T108T
190T114T
315
355
355
400
65T 20L
77T5T
90T4T
95T23T
108T23T
125T40T
153T68T
211T126T
217T132T
400
450
450
500
Unitm
K7
housing
bearing
M7
housing
bearing
N7
housing
bearing
P7
housing
bearing
Nominal
outside
diameter of
bearing
d
mm
over
incl.
10T 13L
15T 8L
19T 4L
24T 1L
10
12T 14L
18T 8L
23T 3L
29T 3L
10
18
15T 15L
21T 9L
28T 2L
35T 5L
18
30
18T 18L
25T 11L
33T 3L
42T 6L
30
50
21T 22L
30T 13L
39T 4L
52T 8L
50
80
25T 25L
35T 15L
45T 5L
59T 9L
80
120
28T 30L
40T 18L
52T 6L
68T 10L
120
150
28T 37L
40T 25L
52T 13L
68T 3L
150
180
33T 43L
46T 30L
60T 16L
79T 3L
180
250
36T 51L
52T 35L
66T 21L
88T 1L
250
315
40T 57L
57T 40L
73T 24L
98T 1L
315
400
45T 63L
63T 45L
80T 28L
400
500
108T 0
A-53
Bearing Fits
Table 7.6 Fits for inch series tapered roller bearing (ANSI class 4)
Table 7.6 (1) Fit with shaft
Unitm
Shaft diameter
Load conditions
d
over
mm
incl.
Cone bore
tolerance
ds
high
low
Shaft tolerance
Extreme fits
Remark
Rotating cone load

Stationary cone load
high
low
max
Normal loads,
no shock
76.2
76.2 304.8
304.8 609.6
609.6 914.4
+13
+25
+51
+76
0
0
0
0
+ 38
+ 64
+127
+190
+ 25
+ 38
+ 76
+114
38T
64T
127T
190T
Heavy loads or
shock loads
76.2
76.2 304.8
304.8 609.6
609.6 914.4
+13
+25
+51
+76
0
0
0
0
+ 64 + 38
38T 12T
Use average tight cone fit of 0.5m/mm,
(0.0005 inch/inch) of cone bore, use a
minimum fit of 25m, 0.0010 inch tight.
Cone axial
displacement
on shaft
necessary
76.2
76.2 304.8
304.8 609.6
609.6 914.4
+13
+25
+51
+76
0
0
0
0
+
+
+
+
Cone axial
displacement
on shaft
unnecessary
76.2
76.2 304.8
304.8 609.6
609.6 914.4
+13
+25
+51
+76
0
0
0
0
13
25
51
76
0
0
0
0
min
12T
13T
25T
38T
0
0
0
0
13T
25T
51T
76T
13L
25L
51L
76L
13
25
51
76
0
0
0
0
13L
50L
102L
152L
This extreme fits

is applicable to
little shock load
conditions.
This extreme fits

is not applicable
to shock load
conditions.
Table 7.6 (2) Fit with housing
Load conditions
Unitm
Housing bore
diameter
D mm
over
incl.
Cup O.D.
tolerance
Ds
high
low
Housing bore
tolerance
Extreme fits
high
low
max
Types of fit
min
76.2
127.0
304.8
609.6
76.2
127.0
304.8
609.6
914.4
+25
+25
+25
+51
+76
0
0
0
0
0
+ 76
+ 76
+ 76
+152
+229
+ 51
+ 51
+ 51
+102
+152
26L
26L
26L
51L
76L
76L
76L
76L
152L
229L
loose fit
Light and
normal loads:
cup axially
adjustable
76.2
127.0
304.8
609.6
76.2
127.0
304.8
609.6
914.4
+25
+25
+25
+51
+76
0
0
0
0
0
+ 25
+ 25
+ 51
+ 76
+127
0
0
0
+ 26
+ 51
25T
25T
25T
25T
25T
25L
25L
51L
76L
127L
tight
interference fit
Heavy loads:
cup not axially
displaceable
76.2
127.0
304.8
609.6
76.2
127.0
304.8
609.6
914.4
+25
+25
+25
+51
+76
0
0
0
0
0
13
25
25
25
25
- 38
- 51
- 51
- 76
-102
63T
76T
76T
127T
178T
13T
25T
25T
25T
25T
76.2
127.0
304.8
609.6
76.2
127.0
304.8
609.6
914.4
+25
+25
+25
+51
+76
0
0
0
0
0
13
25
25
25
25
- 38
- 51
- 51
- 76
-102
63T
76T
76T
127T
178T
13T
25T
25T
25T
25T
Light and
normal loads:
cup easily
axially
displaceable
Stationary cup load
Rotating
cup load
Cup not axially

displaceable
1 For bearings with negation deviation indicated in bearing tables,same fit applies.
Note 1: For bearings higher than class 2, consult NTN Engineering.
2: T= tight, L= loose
A-54
tight fit
Bearing Fits
Bearing Internal Clearance and Preload

8.
8.1 Bearing internal clearance
8.2
Bearing internal clearance (initial clearance) is the

amount of internal clearance a bearing has before being
installed on a shaft or in a housing.
The internal clearance of a bearing under operating

conditions (effective clearance) is usually smaller than
the same bearing's initial clearance before being installed
and operated. This is due to several factors including
bearing fit, the difference in temperature between the
inner and outer rings, etc. As a bearing's operating
clearance has an effect on bearing life, heat
generation, vibration, noise, etc.; care must be taken
in selecting the most suitable operating clearance.
As shown in Fig. 8.1, when either the inner ring or the

outer ring is fixed and the other ring is free to move,
displacement can take place in either an axial or radial
direction. This amount of displacement (radially or axially)
is termed the internal clearance and, depending on the
direction, is called the radial internal clearance or the
axial internal clearance.
Internal clearance selection
Effective internal clearance:

The internal clearance differential between the initial
clearance and the operating (effective) clearance (the
amount of clearance reduction caused by interference
fits, or clearance variation due to the temperature
difference between the inner and outer rings) can be
calculated by the following formula:
When the internal clearance of a bearing is measured, a

slight measurement load is applied to the raceway so the
internal clearance may be measured accurately.
However, at this time, a slight amount of elastic
deformation of the bearing occurs under the measurement
load, and the clearance measurement value (measured
clearance) is slightly larger than the true clearance. This
discrepancy between the true bearing clearance and the
increased amount due to the elastic deformation must be
compensated for. These compensation values are given in
Table 8.1. For roller bearings the amount of elastic
deformation can be ignored.
eff o f t 8.1
where,
eff : Effective internal clearance, mm
o : Bearing internal clearance, mm
f : Reduced amount of clearance due to
interference, mm
t : Reduced amount of clearance due to
temperature differential of inner and outer
r, mm
The internal clearance values for each bearing class are

shown in Tables 8.3 through 8.11.
Table 8.1 Adjustment of radial internal clearance based on

measured load
Unitm
Nominal Bore Diameter

Measuring Load
d mm
Nkgf
over
incl.
10 1
18
50
18
50
200
24.5
49
147
2.5
5
15
Radial Clearance Increase

C2
CN
34
45
68
4
5
8
C3 C4 C5
4
6
9
4
6
9
4
6
9
1 This diameter is included in the group.
Table 8.2 Examples of applications where bearing clearances

other than normal clearance are used
Operating conditions
Applications
Railway vehicle axles
With heavy or shock

load, clearance is great. Vibration screens
Radial clearance = Axial clearance =12
C3C4
C4
Tractors and final speed

regulators
C4
Paper making machines

and driers
C3C4
Rolling mill table rollers
C3
To reduce noise and

vibration when rotating.
Micromotors
C2CM
To reduce shaft runout,

clearance is adjusted.
Main spindles of lathes

(Double-row cylindrical roller
bearings)
C9NA
C0NA
Shaft or inner ring is

heated.
A-56
C3
Railway vehicle traction

motors
With direction
indeterminate load,
both inner and outer
rings are tight-fitted.
Fig. 8.1 Internal clearance
Selected clearance
temperature difference between the two rings can be

even greater. The amount of internal clearance is thus
further reduced by the differential expansion of the
two rings.
(1) Reduced clearance due to interference

When bearings are installed with interference fits on
shafts and in housings, the inner ring will expand and the
outer ring will contract; thus reducing the bearings'
internal clearance. The amount of expansion or
contraction varies depending on the shape of the
bearing, the shape of the shaft or housing, dimensions of
the respective parts, and the type of materials used. The
differential can range from approximately 70% to 90%
of the effective interference.
t TDo (8.3)
where,
t : Amount of reduced clearance due to heat
differential, mm
: Bearing steel linear expansion coefficient
12.5 10-6/C
T : Inner/outer ring temperature differential,
Do : Outer ring raceway diameter, mm
f (0.700.90) deff (8.2)

where,
f : Reduced amount of clearance due to
interference, mm
deff : Effective interference, mm
Outer ring raceway diameter, Do, values can be

approximated by using formula (8.4) or (8.5).
For ball bearings and spherical roller bearings,
Do 0.20 (d 4.0D) (8.4)
For roller bearings (except self-aligning),
Do 0.25 (d 3.0D) (8.5)
where,
d : Bearing bore diameter, mm
D : Bearing outside diameter, mm
(2) Reduced internal clearance due to inner/outer ring

temperature difference.
During operation, normally the outer ring will range
from 5 to 10 cooler than the inner ring or rotating parts.
However, if the cooling effect of the housing is large, the
shaft is connected to a heat source, or a heated
substance is conducted through the hollow shaft; the
Table 8.3 Radial internal clearance of deep groove ball bearings

dmm
over
incl.
Unitm
C3
CN
C2
C4
min
max
min
max
min
max
min
C5
max
min
max
2.5
6
2.5
6
10
0
0
0
6
7
7
4
2
2
11
13
13
10
8
8
20
23
23
14
29
20
37
10
18
24
18
24
30
0
0
1
9
10
11
3
5
5
18
20
20
11
13
13
25
28
28
18
20
23
33
36
41
25
28
30
45
48
53
30
40
50
40
50
65
1
1
1
11
11
15
6
6
8
20
23
28
15
18
23
33
36
43
28
30
38
46
51
61
40
45
55
64
73
90
65
80
100
80
100
120
1
1
2
15
18
20
10
12
15
30
36
41
25
30
36
51
58
66
46
53
61
71
84
97
65
75
90
105
120
140
120
140
160
140
160
180
2
2
2
23
23
25
18
18
20
48
53
61
41
46
53
81
91
102
71
81
91
114
130
147
105
120
135
160
180
200
180
200
225
200
225
250
2
2
2
30
35
40
25
25
30
71
85
95
63
75
85
117
140
160
107
125
145
163
195
225
150
175
205
230
265
300
250
280
315
280
315
355
2
2
3
45
55
60
35
40
45
105
115
125
90
100
110
170
190
210
155
175
195
245
270
300
225
245
275
340
370
410
355
400
450
400
450
500
3
3
3
70
80
90
55
60
70
145
170
190
130
150
170
240
270
300
225
250
280
340
380
420
315
350
390
460
510
570
500
560
560
630
10
10
100
110
80
90
210
230
190
210
330
360
310
340
470
520
440
490
630
690
A-57
Table 8.4 Radial internal clearance of self-aligning ball bearings

dmm
over
incl.
Bearing with cylindrical bore

C2
min
max
min
C3
min
max
Normal
max
C4
min
max
C5
min
max
2.5
6
10
6
10
14
1
2
2
8
9
10
5
6
6
15
17
19
10
12
13
20
25
26
15
19
21
25
33
35
21
27
30
33
42
48
14
18
24
18
24
30
3
4
5
12
14
16
8
10
11
21
23
24
15
17
19
28
30
35
23
25
29
37
39
46
32
34
40
50
52
58
30
40
50
40
50
65
6
6
7
18
19
21
13
14
16
29
31
36
23
25
30
40
44
50
34
37
45
53
57
69
46
50
62
66
71
88
65
80
100
80
100
120
8
9
10
24
27
31
18
22
25
40
48
56
35
42
50
60
70
83
54
64
75
83
96
114
76
89
105
108
124
145
120
140
140
10
15
38
44
30
35
68
80
60
70
100
120
90
110
135
161
125
150
175
210
160
Table 8.5 Radial internal clearance of double row and duplex angular contact ball bearings
C2
C1
Unitm
C3
Normal
C4
dmm
over
incl.
min
max
10
18
10
18
30
3
3
3
8
8
10
30
50
80
50
80
100
3
3
3
100
120
150
180
120
150
180
200
3
3
3
3
min
max
min
max
min
max
min
max
6
6
6
12
12
12
8
8
10
15
15
20
15
15
20
22
24
32
22
30
40
30
40
55
10
11
13
8
11
13
14
17
22
14
17
22
25
32
40
25
32
40
40
50
60
55
75
95
75
95
120
15
16
18
20
15
16
18
20
30
33
35
40
30
35
35
40
50
55
60
65
50
55
60
65
75
80
90
100
110
130
150
180
140
170
200
240
Note: The clearance group in the table is applied only to contact angles in the table below.
Table 8.6 Radial internal clearance of bearings for electric motor

Contact angle
symbol
C
1
A
B
Nominal contact
angle
15
30
40
Unitm
Applicable clearance group
Nominal bore
diameter
dmm
over
incl.
C1C2
C2NormalC3
NormalC3C4
1 Usually not to be indicated
Radial internal clearance CM

Deep groove ball bearings Cylindrical roller bearings
min
max
min
max
10 (incl.)
18
24
18
24
30
4
5
5
11
12
12
15
30
30
40
50
40
50
65
9
9
12
17
17
22
15
20
25
30
35
40
65
80
100
80
100
120
12
18
18
22
30
30
30
35
35
45
55
60
120
140
160
140
160
180
24
24
38
38
40
50
60
65
80
90
180
200
65
100
Note 1: Suffix CM is added to bearing numbers.

2: Non-interchangeable clearance
3: This diameter is included in the group.
A-58
Unitm
Bearing with tapered bore

C2
min
max
Normal
C3
C4
dmm
C5
min
max
min
max
min
max
min
max
over
incl.
2.5
6
10
6
10
14
7
9
17
20
13
15
26
28
20
23
33
39
28
33
42
50
37
44
55
62
14
18
24
18
24
30
12
14
18
24
27
32
19
22
27
35
39
47
29
33
41
46
52
61
40
45
56
59
65
80
52
58
73
72
79
99
30
40
50
40
50
65
23
29
35
39
47
56
35
42
50
57
68
81
50
62
75
75
90
108
69
84
100
98
116
139
91
109
130
123
144
170
65
80
100
80
100
120
40
45
68
74
60
65
98
110
90
100
130
150
120
140
165
191
155
180
205
240
120
140
140
160
Table 8.7 Radial internal clearance of cylindrical roller bearings, needle roller bearings
(Interchangeable, cylindrical bore bearings)
dmm
over
incl.
Normal
C2
Unitm
C3
C4
C5
min
max
min
max
min
max
min
max
min
max
10
24
10
24
30
0
0
0
25
25
25
20
20
20
45
45
45
35
35
35
60
60
60
50
50
50
75
75
75
30
40
50
40
50
65
5
5
10
30
35
40
25
30
40
50
60
70
45
50
60
70
80
90
60
70
80
85
100
110
80
95
110
105
125
140
65
80
100
80
100
120
10
15
15
45
50
55
40
50
50
75
85
90
65
75
85
100
110
125
90
105
125
125
140
165
130
155
180
165
190
220
120
140
160
140
160
180
15
20
25
60
70
75
60
70
75
105
120
125
100
115
120
145
165
170
145
165
170
190
215
220
200
225
250
245
275
300
180
200
225
200
225
250
35
45
45
90
105
110
90
105
110
145
165
175
140
160
170
195
220
235
195
220
235
250
280
300
275
305
330
330
365
395
250
280
315
280
315
355
55
55
65
125
130
145
125
130
145
195
205
225
190
200
225
260
275
305
260
275
305
330
350
385
370
410
455
440
485
535
355
400
450
400
450
500
100
110
110
190
210
220
190
210
220
280
310
330
280
310
330
370
410
440
370
410
440
460
510
550
510
565
625
600
665
735
A-59
65
70
90
95
Table 8.8 Radial internal clearance of cylindrical roller bearings, needle roller bearings (non-interchangeable)
Nominal bore
diameter
dmm
over
incl.

C1NA
min
max
C2NA
min
max
NA1
min
max
C3NA
min
max
C4NA
min
max
C5NA
min
max
10
18
10
18
24
5
5
5
10
10
10
10
10
10
20
20
20
20
20
20
30
30
30
35
35
35
45
45
45
45
45
45
55
55
55
65
65
75
75
24
30
40
30
40
50
5
5
5
10
12
15
10
12
15
25
25
30
25
25
30
35
40
45
40
45
50
50
55
65
50
55
65
60
70
80
70
80
95
80
95
110
50
65
80
65
80
100
5
10
10
15
20
25
15
20
25
35
40
45
35
40
45
50
60
70
55
70
80
75
90
105
75
90
105
90
110
125
110
130
155
130
150
180
100
120
140
120
140
160
10
15
15
25
30
35
25
30
35
50
60
65
50
60
65
80
90
100
95
105
115
120
135
150
120
135
150
145
160
180
180
200
225
205
230
260
160
180
200
180
200
225
15
20
20
35
40
45
35
40
45
75
80
90
75
80
90
110
120
135
125
140
155
165
180
200
165
180
200
200
220
240
250
275
305
285
315
350
225
250
280
250
280
315
25
25
30
50
55
60
50
55
60
100
110
120
100
110
120
150
165
180
170
185
205
215
240
265
215
240
265
265
295
325
330
370
410
380
420
470
315
355
400
450
355
400
450
500
30
35
45
50
65
75
85
95
65
75
85
95
135
150
170
190
135
150
170
190
200
225
255
285
225
255
285
315
295
330
370
410
295
330
370
410
360
405
455
505
455
510
565
625
520
585
650
720
1 For bearings with normal clearance, only NA is added to bearing numbers. Ex. NU310NA, NN03020KNAP5
Table 8.9 Axial internal clearance of metric double row and duplex tapered roller bearings
(except series 329X, 330, 322C, 323C)
Nominal bore
diameter
dmm
over
incl.
Contact angle27 (e 0.76)

Normal
C2
C3
C4
min
max
min
max
min
max
min
max
18
24
30
24
30
40
25
25
25
75
75
95
75
75
95
125
125
165
125
145
165
170
195
235
170
195
210
220
245
280
40
50
65
50
65
80
20
20
20
85
85
110
85
110
130
150
175
220
175
195
240
240
260
325
240
280
325
305
350
410
80
100
120
100
120
140
45
45
45
150
175
175
150
175
175
260
305
305
280
350
390
390
480
520
390
455
500
500
585
630
140
160
180
160
180
200
60
80
100
200
220
260
200
240
260
340
380
420
400
440
500
540
580
660
520
600
660
660
740
820
200
225
250
225
250
280
120
160
180
300
360
400
300
360
400
480
560
620
560
620
700
740
820
920
720
820
920
900
1,020
1,140
280
315
355
400
315
355
400
500
200
220
260
300
440
480
560
600
440
500
560
620
680
760
860
920
780
860
980
1,100
1,020
1,120
1,280
1,400
1,020
1,120
1,280
1,440
1,260
1,380
1,580
1,740
where, r = radial internal clearance, m

a = axial internal clearance, m
e = constant, see bearing tables
Note: Radial internal clearance is approximately obtained from:

r = 0.667ea
A-60
Unitm
Nominal bore
diameter
dmm
over
incl.

C9NA2
min
max
C0NA2
min
max
C1NA
min
max
NA1
min
max
C2NA
min
max
C3NA
min
max
5
5
5
5
10
10
7
7
7
17
17
17
10
10
10
20
20
20
20
20
20
30
30
30
35
35
35
45
45
45
45
45
45
55
55
55
10
18
10
18
24
5
5
5
10
12
15
10
10
10
20
20
20
10
12
15
25
25
30
25
25
30
35
40
45
40
45
50
50
55
65
50
55
65
60
70
80
24
30
40
30
40
50
5
10
10
15
20
25
10
15
20
20
30
35
15
20
25
35
40
45
35
40
45
50
60
70
55
70
80
75
90
105
75
90
105
90
110
125
50
65
80
65
80
100
10
15
15
25
30
35
20
25
30
35
40
45
25
30
35
50
60
65
50
60
65
80
90
100
95
105
115
120
135
150
120
135
150
145
160
180
100
120
140
120
140
160
15
20
20
35
40
45
30
30
35
45
50
55
35
40
45
75
80
90
75
80
90
110
120
135
125
140
155
165
180
200
165
180
200
200
220
240
160
180
200
180
200
225
25
25
30
50
55
60
40
40
45
65
65
75
50
55
60
100
110
120
100
110
120
150
165
180
170
185
205
215
240
265
215
240
265
265
295
325
225
250
280
250
280
315
30
35
45
50
65
75
85
95
45
50
60
70
75
90
100
115
65
75
85
95
135
150
170
190
135
150
170
190
200
225
255
285
225
255
285
315
295
330
370
410
295
330
370
410
360
405
455
505
315
355
400
450
355
400
450
500
2 C9NA, C0NA and C1NA are applied only to precision bearings of Class 5 and higher.
Unitm
Contact angle 27 (e 0.76)

C2
min
max
Normal
min
max
C3
min
max
C4
min
max
dmm
over
incl.
10
10
10
30
30
40
30
30
40
50
50
70
50
60
70
70
80
100
70
80
90
90
100
120
18
24
30
24
30
40
10
10
10
40
40
50
40
50
60
70
80
100
80
90
110
110
120
150
110
130
150
140
160
190
40
50
65
50
65
80
20
20
20
70
70
70
70
70
70
120
120
120
130
150
160
180
200
210
180
210
210
230
260
260
80
100
120
100
120
140
30
100
100
160
180
240
240
300
140
160
180
160
180
200
200
225
250
225
250
280
280
315
355
400
315
355
400
500
A-61
Table 8.10 Radial internal clearance of spherical roller bearings

dmm

C2
min
max
Normal
min
max
C3
min
max
C4
min
max
C5
min
max
over
incl.
14
18
24
18
24
30
10
10
15
20
20
25
20
20
25
35
35
40
35
35
40
45
45
55
45
45
55
60
60
75
60
60
75
75
75
95
30
40
50
40
50
65
15
20
20
30
35
40
30
35
40
45
55
65
45
55
65
60
75
90
60
75
90
80
100
120
80
100
120
100
125
150
65
80
100
80
100
120
30
35
40
50
60
75
50
60
75
80
100
120
80
100
120
110
135
160
110
135
160
145
180
210
145
180
210
180
225
260
120
140
160
140
160
180
50
60
65
95
110
120
95
110
120
145
170
180
145
170
180
190
220
240
190
220
240
240
280
310
240
280
310
300
350
390
180
200
225
200
225
250
70
80
90
130
140
150
130
140
150
200
220
240
200
220
240
260
290
320
260
290
320
340
380
420
340
380
420
430
470
520
250
280
315
280
315
355
100
110
120
170
190
200
170
190
200
260
280
310
260
280
310
350
370
410
350
370
410
460
500
550
460
500
550
570
630
690
355
400
450
400
450
500
130
140
140
220
240
260
220
240
260
340
370
410
340
370
410
450
500
550
450
500
550
600
660
720
600
660
720
750
820
900
500
560
630
560
630
710
150
170
190
280
310
350
280
310
350
440
480
530
440
480
530
600
650
700
600
650
700
780
850
920
780
850
920
1,000
1,100
1,190
710
800
900
800
900
1,000
210
230
260
390
430
480
390
430
480
580
650
710
580
650
710
770
860
930
770
860
930
1,010
1,120
1,220
1,010
1,120
1,220
1,300
1,440
1,570
1,000
1,120
1,250
1,120
1,250
1,400
290
320
350
530
580
640
530
580
640
780
860
950
780
860
950
1,020
1,120
1,240
1,020
1,120
1,240
1,330
1,460
1,620
1,330
1,460
1,620
1,720
1,870
2,080
Table 8.11 Axial internal clearance of four points contact ball bearings.
C2
Unit m
CN
C3
C4
dmm
over
incl.
min
max
min
max
min
max
min
max
17
40
60
40
60
80
26
36
46
66
86
96
56
76
86
106
126
136
96
116
126
146
166
176
136
156
166
186
206
226
80
100
140
180
100
140
180
220
56
66
76
96
106
126
156
176
96
116
136
156
156
176
196
216
136
156
176
196
196
216
236
256
186
206
226
246
246
266
296
316
A-62
Unitm

C2
min
max
Normal
C3
C4
dmm
C5
min
max
min
max
min
max
min
max
over
incl.
15
20
25
30
25
30
35
40
35
40
45
55
45
55
60
75
60
75
75
95
14
18
24
18
24
30
25
30
40
35
45
55
35
45
55
50
60
75
50
60
75
65
80
95
65
80
95
85
100
120
85
100
120
105
130
160
30
40
50
40
50
65
50
55
65
70
80
100
70
80
100
95
110
135
95
110
135
120
140
170
120
140
170
150
180
220
150
180
220
200
230
280
65
80
100
80
100
120
80
90
100
120
130
140
120
130
140
160
180
200
160
180
200
200
230
260
200
230
260
260
300
340
260
300
340
330
380
430
120
140
160
140
160
180
110
120
140
160
180
200
160
180
200
220
250
270
220
250
270
290
320
350
290
320
350
370
410
450
370
410
450
470
520
570
180
200
225
200
225
250
150
170
190
220
240
270
220
240
270
300
330
360
300
330
360
390
430
470
390
430
470
490
540
590
490
540
590
620
680
740
250
280
315
280
315
355
210
230
260
300
330
370
300
330
370
400
440
490
400
440
490
520
570
630
520
570
630
650
720
790
650
720
790
820
910
1,000
355
400
450
400
450
500
290
320
350
410
460
510
410
460
510
540
600
670
540
600
670
680
760
850
680
760
850
870
980
1,090
870
980
1,090
1,100
1,230
1,360
500
560
630
560
630
710
390
440
490
570
640
710
570
640
710
750
840
930
750
840
930
960
1,070
1,190
960
1,070
1,190
1,220
1,370
1,520
1,220
1,370
1,520
1,500
1,690
1,860
710
800
900
800
900
1,000
530
570
620
770
830
910
770
830
910
1,030
1,120
1,230
1,030
1,120
1,230
1,300
1,420
1,560
1,300
1,420
1,560
1,670
1,830
2,000
1,670
1,830
2,000
2,050
2,250
2,470
1,000
1,120
1,250
1,120
1,250
1,400
A-63
displacement does not occur. Thus, the natural

frequency of the shaft is increased, which is suitable for
high speeds.
8.3 Preload
Normally, bearings are used with a slight internal
clearance under operating conditions. However, in some
applications, bearings are given an initial load; this means
that the bearings' internal clearance is negative before
operation. This is called "preload" and is commonly
applied to angular ball bearings and tapered roller
bearings.
Preload is also used to prevent or suppress shaft

runout, vibration, and noise; improve running accuracy
and locating accuracy; reduce smearing, and regulate
rolling element rotation. Also, for thrust ball and roller
bearings mounted on horizontal shafts, preloading keeps
the rolling elements in proper alignment.
8.3.1 Purpose of preload

Giving preload to a bearing results in the rolling element
and raceway surfaces being under constant elastic
compressive forces at their contact points. This has the
effect of making the bearing extremely rigid so that even
when load is applied to the bearing, radial or axial shaft
Method
Basic pattern
Applicable bearings
The most common method of preloading is to apply an

axial load to two duplex bearings so that the inner and
outer rings are displaced axially in relation to each other.
This preloading method is divided into fixed position
preload and constant pressure preload.
Object
Fixed position preload
Maintaining
accuracy of
Precision
rotating shaft,
angular contact preventing
ball bearings
vibration
increasing
rigidity
Tapered roller
bearings, thrust Increasing
ball bearings,
bearing rigidity
angular contact
ball bearings
Characteristics
Preloading is accomplished by
a predetermined offset of the
rings or by using spacers. For
the standard preload see Table
8.13
Preload is accomplished by adjusting a
threaded screw.
The amount of preload is set by measuring
the starting torque or axial displacement.
Relationship between the starting torque
M and preload T is approximately given by
the following formulas:for duplex angular
contact ball bearings:
Applications
Grinding machines,
lathes,
milling machines,
measuring instruments
Lathes,
milling machines,
differential gears of automotives,
printing machines, wheel axles
for duplex tapered roller

bearings:
Constant pressure preload
Angular contact
ball bearings,
deep groove
ball bearings,
precision
tapered roller
bearings
Tapered roller
bearings with
steep angle,
spherical roller
thrust bearings,
thrust ball
bearings
Note: In the above formulas
Maintaining
accuracy and
preventing
vibration and
noise with a
constant
amount of
preload without
being affected
by loads or
temperature
Preloading is accomplished by
using coil or belleville springs.
Recommended preloads are as
follows:
for deep groove ball bearings:
410 dN
0.41.0 d kgf
for angular contact ball bearings:
see Table 8.13
Preventing
smearing on
raceway of
non-loaded
side under
axial loads
Preload is accomplished by
using coil or belleville springs.
Recommended preloads are as
follows:
for thrust ball bearings:
1.9
-13
T1=0.42 (nCoa) 10 N
1.9
-13
=3.275(nCoa) 10 kgf
T2=0.00083 Coa Nkgf

which ever is greater for
spherical roller thrust bearings:
T=0.025 Coa0.8N
=0.0158 Coa0.8kgf
dp = pitch diameter of bearing, mm

dp = (Bore+Outside dia) / 2
T = preload, N
The starting torque M however, is greatly influenced by lubricants and a period of run-in time.
A-64
Internal grinding machines,

electric motors,
high speed shafts in small machines,
tension reels
Rolling mills,
extruding machines
d = bearing bore, mm
n = number of revolutions, r/min
Coa = basic static axial load rating, N
8.3.2 Preloading methods and amounts

The basic pattern, purpose and characteristics of
bearing preloads are shown in Table 8.12. The definite
position preload is effective for positioning the two
bearings and also for increasing the rigidity. Due to the
use of a spring for the constant pressure preload, the
preloading amount can be kept constant, even when the
distance between the two bearings fluctuates under the
influence of operating heat and load.
8.3.3 Preload and rigidity

The increased rigidity effect preloading has on bearings
is shown in Fig. 8.2. When the offset inner rings of the
two paired angular contact ball bearings are pressed
together, each inner ring is displaced axially by the
amount 0 and is thus given a preload, F0, in the
direction. Under this condition, when external axial load
Fa is applied, bearing!will have an increased ,
displacement by the amount a and bearing @s
displacement will decrease. At this time the loads applied
to bearing!and @ are FI and FII, respectively.
Also, the standard preloading amount for the paired

angular contact ball bearings is shown in Table 8.13.
Light and normal preload is applied to prevent general
vibration, and medium and heavy preload is applied
especially when rigidity is required.
Under the condition of no preload, bearing I will be

displaced by the amount b when axial load Fa is
applied. Since the amount of displacement, a, is less
than b, it indicates a higher rigidity for a.
Bearing2 Bearing1
Axial load
Fa
Fo
Fo
Bearing2
Outer ring Steel ball
Inner ring
o
b
(1) Under free from

preload
o
(2) Under
preloading
Bearing1
o o
Inner ring
displacement
Fo : Preload
Fo
a
F2
(3) Under preloading

and applied load
Fa
F1
Fa
Fo
Inner ring
displacement
F1= F2+ Fa
Fa: External axial load
F2
1
o
2
o
F1= F2+ Fa
Fig. 8.2 Fixed position preload versus axial displacement
A-65
Axial displacement
Table 8.13 The normal preload of duplex arrangement angular contact ball bearings
Nominal
bore diameter
d mm
Bearing
78C
Low
Normal
over
inch
12
18
12
18
32
10 1 29 3
32
40
50
40
50
65
65
80
90
79CHSB9C
Central
Heavy
Low
Low
Normal
98 10
10 1 29 3 78 8
20 2 49 5 98 10
29 3 9810 196 20
147 15 29 3 78 8
196 20 39 4 98 10
390 40 49 5 118 12
196 20
245 25
294 30
294 30
490 50
590 60
80
90
95
29 3 9810 196 20
49 5 14715 294 30
49 5 14715 294 30
390 40 78 8 196 20
590 60 9810 245 25
590 60 9810 245 25
390 40
490 50
490 50
785 80 9810 294 30

980100 14715 390 40
980100 14715 390 40
95
100
105
100
105
110
49 5 14715 294 30
49 5 14715 294 30
78 8 19620 490 50
590 60 11812 294 30

590 60 11812 294 30
980100 11812 294 30
685 70 1,470150 14715 390 40

685 70 1,470150 19620 590 60
685 70 1,470150 19620 590 60
110
120
140
120
140
150
78 8 19620 490 50 980100 14715 390 40 880 90 1,960200 19620 590 60

9810 29430 590 60 1,270130 19620 490 50 980100 2,450250 29430 785 80
14715 39040 785 80 1,470150 24525 685 70 1,470150 2,940300 29430 785 80
150
160
170
160
170
180
14715 39040 785 80 1,470150 24525 685 70 1,470150 2,940300 49050 980100
14715 49050 980100 1,960200 24525 685 70 1,470150 2,940300 49050 980100
14715 49050 980100 1,960200 29430 880 90 1,960200 3,900400 49050 980100
180
190
190
200
19620 590601,270130 2,450250 29430 880 90 1,960200 3,900400 590601,470150

19620 590601,270130 2,450250 490501,270130 2,940300 5,900600 590601,470150
49
Heavy
Central
196 20
78
147 15 20 2
Normal
70CBNT0
20 2
20 2
29 3
29
29
78
3
3
8
49 5 147 15
49 5 147 15
9810 196 20
Bearing

d mm
79HSB9
Normal
Central
70HSB0
Heavy
Low
Normal
Central
Heavy
over
inch
12
18
12
18
32
39 4
49 5
98 10
78 8
147 15
196 20
147 15
196 20
294 30
29 3
29 3
49 5
78 8
78 8
147 15
147 15
147 15
294 30
32
40
50
40
50
65
147 15
196 20
245 25
294 30
390 40
490 50
590 60
635 70
785 80
78 8
78 8
14715
294 30
294 30
490 50
590 60
590 60
880 90
880 90
980 100
1,470 150
65
80
90
80
90
95
390 40
490 50
490 50
785 80
980100
980100
1,180120
1,470150
1,470150
14715
19620
19620
590 60
880 90
880 90
1,470150
1,960200
1,960200
1,960 200
2,940 300
2,940 300
95
100
105
100
105
110
685 70
685 70
685 70
1,274130
1,274130
1,274130
1,960200
1,960200
1,960200
19620
29430
29430
880 90
980100
980100
1,960200
2,450250
2,450250
2,940 300
3,900 400
3,900 400
110
120
140
120
140
150
880 90
980100
1,270130
1,780180
1,960200
2,450250
2,940300
3,450350
4,400450
29430
49050
49050
980100
1,470150
1,470150
2,450250
3,450350
3,450350
3,900 400
5,900 600
5,900 600
150
160
170
160
170
180
1,270130
1,270130
1,780180
2,450250
2,450250
3,450350
4,400450
4,400450
5,900600
68570
68570
68570
2,450250
2,450250
2,450250
4,900500
4,900500
4,900500
8,800 900
8,800 900
8,800 900
180
190
190
200
1,780180
2,450250
3,450350
4,900500
5,900600
7,850800
88090
88090
3,450350
3,450350
6,850700
6,850700
9,8001,000
9,8001,000
A-66
196
294
490
20
30
50
Unit Nkgf
series
HSB0C
72CBNT2
Central
Heavy
Low
73C
Normal
Central
98 10
147 15
294 30
98 10
98 10
147 15
147 15
196 20
294 30
20 2
20 2
49 5
49 5
49 5
98 10
294 30
294 30
490 50
590 60 78 8
685 70 9810
980100 14715
196 20
294 30
390 40
Heavy
196
294
490
Low
20 29
30 29
50 76
Normal
Central
3 78 8
3 78 8
8 147 15
Heavy
147 15
196 20
390 40
294
390
685
30
40
70
490 50 785 80 98 10 294 30 590 60 980 100

590 60 980 100 145 15 390 40 980100 1,960 200
785 80 1,470 150 196 20 590 60 1,470150 2,940 300
685 70 1,470150 19620

980100 1,960200 29430
980100 1,960200 29430
490 50 980100 1,960 200 294 30 785 80 1,960200 3,900 400

685 70 1,470150 2,940 300 390 40 980100 2,450250 4,900 500
685 70 1,960200 3,900 400 390 40 980100 2,950300 5,900 600
980100 1,960200 29430

1,470150 2,450250 39040
1,470150 2,450250 39040
685 70 1,960200 3,900 400 390 40 980100 2,950300 5,900 600

980100 2,450250 4,900 500 590 60 1,470150 3,450350 6,850 700
980100 2,450250 4,900 500 590 60 1,470150 3,450350 6,850 700
1,470150 2,450250 39040 980100 2,450250 4,900 500 590 60 1,470150 3,450350 6,850 700
1,960200 3,900400 49050 1,470150 2,940300 5,900 600 785 80 1,960200 4,400450 8,800 900
1,960200 3,900400 49050 1,470150 2,940300 5,900 600 785 80 1,960200 4,400450 8,800 900
2,450250 5,900600 68570 1,960200 4,400450 7,850 800 880 90 2,450250 5,900600 9,8001,100
2,450250 5,900600 68570 1,960200 4,400450 7,850 800 880 90 2,450250 5,900600 9,8001,100
2,450250 5,900600 68570 1,960200 4,400450 7,850 800 880 90 2,450250 5,900600 9,8001,100
3,450350 6,850700 78580 2,450250 4,900500 9,8001,000 980100 2,940300 6,85070011,8001,200
3,450350 6,850700 78580 2,450250 4,900500 9,8001,000 980100 2,940300 6,85070011,8001,200
Unit Nkgf
series
7272B
Low
29
29
78
Normal
Central
3
3
8
98 10
98 10
196 20
196 20
294 30
490 50
98 10
147 15
196 20
390 40
590 60
785 80
294 30
490 50
490 50
7373B
Heavy
Low
Normal
Central
30
40
60
390 40
490 50
980 100
490 50
785 80
980100
980 100
1,470 150
2,450 250
1,960 200
2,450 250
3,900 400
390 40
590 60
590 60
1,470150
1,960200
2,450250
3,450 350
3,900 400
4,900 500
4,900 500
5,880 600
6,854 700
5,900 600
7,850 800
7,850 800
590 60
685 70
685 70
2,450250
2,940300
2,940300
4,900 500
5,900 600
5,900 600
6,860 700
8,800 900
8,800 900
4,900500
5,900600
5,900600
7,850 800
9,8001,000
9,8001,000
685 70
880 90
880 90
2,940300
3,900400
3,900400
5,900 600
7,850 800
7,850 800
8,800 900
11,8001,200
11,8001,200
3,900400
3,900400
3,900400
7,850800
7,850800
7,850800
11,8001,200
11,8001,200
11,8001,200
980100
980100
980100
4,400450
4,400450
4,400450
8,800 900
8,800 900
8,800 900
13,7001,400
13,7001,400
13,7001,400
4,400450
4,400450
8,800900
8,800900
13,7001,400
13,7001,400
1,470150
1,470150
5,900600
5,900600
11,8001,200
11,8001,200
15,7001,600
15,7001,600
294
390
785
30
40
80
49 5
49 5
98 10
147 15
147 15
294 30
880 90
980100
1,470150
1,470 150
1,960 200
2,940 300
147 15
196 20
294 30
980100
1,470150
1,960200
2,450250
2,940300
3,900400
3,900 400
4,900 500
5,900 600
490 50
590 60
590 60
1,960200
2,450250
2,450250
3,900400
4,900500
4,900500
590 60
785 80
785 80
2,450250
2,940300
2,940300
880 90
880 90
880 90
980100
980100
A-67
294
390
590
Heavy
Allowable Speed
9. Allowable Speed
As bearing speed increases, the temperature of the
bearing also increases due to friction heat generated in
the bearing interior. If the temperature continues to rise
and exceeds certain limits, the efficiency of the lubricant
start to fail down drastically, and the bearing can no
longer continue to operate in a stable manner. Therefore,
the maximum speed at which it is possible for the bearing
to continuously operate without the generation of
excessive heat beyond specified limits, is called the
allowable speed (r/min).
The allowable speed of a bearing depends on the type
of bearing, bearing dimensions, type of cage, load,
lubricating conditions, and cooling conditions.
1.0
0.9
fL
0.8
0.7
0.6
0.5
5
10
11
Cr
P
The allowable speeds listed in the bearing tables for

grease and oil lubrication are for standard NTN bearings
under normal operating conditions, correctly installed,
using the suitable lubricants with adequate supply and
proper maintenance. Moreover, these values are based
on normal load conditions (P 0.09C, Fa / Fr 0.3). For
ball bearings with contact seals (LLU type), the allowable
speed is determined by the peripheral lip speed of the
seal.
Fig. 9.1 Value of adjustment factor FL depends on bearing load
1.0
Angular
contact ba
0.9
Deep g
For bearings to be used under heavier than normal load

conditions, the allowable speed values listed in the
bearing tables must be multiplied by an adjustment factor.
The adjustment factors f L and f C are given in Figs. 9.1
and 9.2.
roove b
ll bearings
all beari
ngs
fC
0.8
Cyli
Tap ndrical
ere
d ro roller b
ller
e
bea arings
ring
s (F
a/F
0.7
0.6
Also, when radial bearings are mounted on vertical

shafts, lubricant retentions and cage guidance are not
favorable compared to horizontal shaft mounting.
0.5
0.5
1.0
1.5
2e)
2.0
Fa
Fr
Therefore, the allowable speed should be reduced to

approximately 80% of the listed speed.
Fig. 9.2 Value of adjustment factor FC depends on combined load
For speeds other than those mentioned above, and for

which data is incomplete, please consult NTN
Engineering.
Table 9.1 Adjustment factor, fB, for allowable number

of revolutions
Type of bearing
It is possible to operate precision bearings with high

speed specification cages at speeds higher than those
listed in the bearing tables, if special precautions are
taken. These precautions should include the use of forced
oil circulation methods such as oil jet or oil mist
lubrication.
Deep groove ball bearings

Cylindrical roller bearings
Under such high speed operating conditions, when

special care is taken, the standard allowable speeds
given in the bearing tables can be adjusted upward. The
maximum speed adjustment values, f B, by which the
bearing table speeds can be multiplied, are shown in
Table 9.1. However, for any application requiring speeds
in excess of the standard allowable speed, please consult
NTN Engineering.
A-68
Adjustment factor fB
3.0
2.0
2.5
2.0
Friction and Temperature Rise

10. Friction and Temperature Rise
10.1 Friction
10.2 Temperature rise
One of the main functions required of a bearing is that

it must have low friction. Under normal operating
conditions rolling bearings have a much smaller friction
coefficient than the slide bearings, especially starting
friction.
Almost all friction loss in a bearing is transformed into

heat within the bearing itself and causes the temperature
of the bearing to rise. The amount of thermal generation
caused by friction moment can be calculated using
formula (10.2).
The friction coefficient for rolling bearings is calculated

on the basis of the bearing bore diameters and is
expressed by formula (10.1).
Q0.10510 Mn N
(10.2)
-6
1.0310 Mnkgf
where,
QThermal value, kW
MFriction moment, Nmm
nRotational speed, r/min
-6
2M
Pd (10.1)
where,
Friction coefficient
M Friction moment, Nmm
P Load, N
d Bearing bore diameter, mm
Bearing operating temperature is determined by the

equilibrium or balance between the amount of heat
generated by the bearing and the amount of heat
conducted away from the bearing. In most cases the
temperature rises sharply during initial operation, then
increases slowly until it reaches a stable condition and
then remains constant. The time it takes to reach this
stable state will vary according to the amount of heat
generated, the heat absorbing capacity of the housing
and surrounding parts, the amount of cooling surface,
amount of lubricating oil, and the surrounding ambient
temperature. If the temperature continues to rise and
does not become constant, it must be assumed that there
is some improper function.
Although the dynamic friction coefficient for rolling

bearings varies with the type of bearings, load,
lubrication, speed, and other factors; for normal operating
conditions, the approximate friction coefficients for
various bearing types are listed in Table 10.1.
Table 10.1 Friction coefficient for bearings

-3
Bearing type
Coefficient 10

Thrust roller bearings
1.01.5
1.21.8
0.81.2
1.01.5
2.03.0
1.72.5
2.02.5
1.01.5
2.03.0
Excessive bearing heat can be caused by: moment

load, insufficient internal clearance, excessive preload,
too little or too much lubricant, foreign matter in the
bearing, or by heat generated at the sealing device.
A-69
Lubrication
11. Lubrication
11.1 Lubrication of rolling bearings
(dust, water, etc.) into the bearing interior, removes dust

and other impurities from the lubricant, and prevents the
lubricant from leaking to the outside, is also a
requirement.
The purpose of bearing lubrication is to prevent direct

metallic contact between the various rolling and sliding
elements. This is accomplished through the formation of a
thin oil (or grease) film on the contact surfaces. However,
for rolling bearings, lubrication has the following
advantages:
Almost all rolling bearings use either grease or oil

lubrication methods, but in some special applications, a
solid lubricant such as molybdenum disulfide or graphite
may be used.
(1) Friction and wear reduction

(2) Friction heat dissipation
(3) Prolonged bearing life
(4) Prevention of rust
(5) Protection against harmful elements
Fig. 11.1 shows the relationship between oil volume,

friction loss, and bearing temperature. Table 11.1 details
the characteristics of this relationship.
11.2 Lubrication methods and characteristics
In order to achieve the above effects, the most effective

lubrication method for the operating conditions must be
selected. Also, a good quality, reliable lubricant must be
selected. In addition, an effectively designed sealing
system that prevents the intrusion of damaging elements
The lubrication methods come in two general

methods: you must be care for select of that from using
condition.
The characteristic are show in table 11.2.
high
high
Table 11.2 Comparison of grease lubrication and

oil lubrication characteristics
Method
Friction loss
Friction loss
Temperature increase
Temperature
increase
Concern
Grease
lubrication
Handling
Reliability
Cooling effect
necessary)
Seal structure
Power loss
Environment contamination
High speed rotation
Oil lubrication
(Circulation
Oil volume
Very goodGoodFairPoor
great
Fig. 11.1
11.3 Grease lubrication

Table 11.1 Oil volume, friction loss, bearing temperature
(See Fig. 11.1)
Range
Characteristics
Lubrication method
When oil volume is extremely low,

direct metallic contact occurs in places
between the rolling elements and
raceway surfaces. Bearing abrasion
and seizing occur.
A thin oil film develops over all

surfaces, friction is minimal and
bearing temperature is low.
Grease lubrication,
oil mist,
air-oil lubrication
As oil volume increases, heat buildup

is balanced by cooling.
Circulating
lubrication
Regardless of oil volume, temperature

increases at a fixed rate.
Circulating
lubrication
As oil volume increases, cooling

Forced circulation
predominates and bearing temperature lubrication,
decreases.
Oil jet lubrication
Grease type lubricants are relatively easy to handle and

require only the simplest sealing devices-for these
reasons, grease is the most widely used lubricant for
rolling bearings.
11.3.1 Types and characteristics of grease
Lubricating grease are composed of either a mineral oil
base or a synthetic oil base. To this base a thickener and
other additives are added. The properties of all greases
are mainly determined by the kind of base oil used and by
the combination of thickening agent and various
additives.
Standard greases and their characteristics are listed in
Table 11.3. As performance characteristics of even the
same type of grease will vary widely from brand to brand,
it is best to check the manufacturers' data when
selecting a grease.
A-70
Lubrication
Table 11.3 Grease varieties and characteristics

Grease name
Lithium grease
Sodium grease
(Fiber grease)
Calcium compound
base grease
Thickener
Li soap
Na soap
Ca+Na soap
Ca+Li soap
Base oil
Mineral oil
Diester oil
Silicone oil
Mineral oil
Mineral oil
Dropping point C
170 190
170 190
200 250
150 180
150 180
Operating
temperature range C
-30 +130
-50 +130
-50 +160
-20 +130
-20 +120
Mechanical stability
Excellent
Good
Good
Excellent Good
Excellent Good
Pressure resistance
Good
Good
poor
Good
Excellent Good
Water resistance
Good
Good
Good
Good poor
Good poor
Widest range of
applications.
Applications
Grease used in all

types of rolling
bearings.
Excellent low
temperature and
wear characteristics.
Suitable for high

and low
temperatures.
Some emulsification
when water is
introduced.
Excellent pressure
resistance and
mechanical stability.
Suitable for small

sized and miniature
bearings.
Unsuitable for heavy

load applications due
to low oil film
strength.
Excellent
characteristics at
relatively high
temperatures.
Suitable for
bearings receiving
shock loads.
Grease name
Aluminum grease
Non-soap base grease

Thickener
Thickener
AI soap
Bentone, silica gel, urea, carbon black,

fluorine compounds, etc.
Base oil
Mineral oil
Mineral oil
Synthetic oil
Dropping point C
70 90
250 or above
250 or above
Operating
temperature range C
-10 +80
-10 +130
-50 +200
Mechanical stability
Good poor
Good
Good
Pressure resistance
Good
Good
Good
Water resistance
Good
Good
Good
Excellent viscosity
characteristics.
Applications
Suitable for
bearings subjected
to vibrations.
Can be used in a wide range of low to

high temperatures. Shows excellent heat
resistance, cold resistance, chemical
resistance, and other characteristics
when matched with a suitable base oil
and thickener.
Grease used in all types of rolling bearings.
A-71
Lubrication
(1) Base oil

Natural mineral oil or synthetic oils such as diester oil,
silicone oil and fluorocarbon oil are used as grease base
oils.
Table 11.4 Consistency of grease
Mainly, the properties of any grease is determined by

the properties of the base oil. Generally, greases with a
low viscosity base oil are best suited for low temperatures
and high speeds; while greases made from high viscosity
base oils are best suited for heavy loads.
(2) Thickening agents
Thickening agents are compounded with base oils to
maintain the semi-solid state of the grease. Thickening
agents consist of two types of bases, metallic soaps and
non-soaps. Metallic soap thickeners include: lithium,
sodium, calcium, etc.
NLGI
Consistency No.
JIS (ASTM)
Worked
penetration
355385
For centralized greasing use
310340
For centralized greasing use
265295
For general use and sealed bearing use
220250
For general and high temperature use
175205 For special use
Applications
(5) Mixing of greases

When greases of different kinds are mixed together, the
consistency of the greases will change (usually softer), the
operating temperature range will be lowered, and other
changes in characteristics will occur. As a general rule,
greases with different bases oil, and greases with different
thickener agents should never be mixed.
Non-soap base thickeners are divided into two groups;

inorganic (silica gel, bentonite, etc.) and organic (polyurea, fluorocarbon, etc.).
Also, greases of different brands should not be mixed

because of the different additives they contain.
The various special characteristics of a grease, such as

limiting temperature range, mechanical stability, water
resistance, etc. depend largely on the type of thickening
agent used. For example, a sodium based grease is
generally poor in water resistance properties, while
greases with bentone, poly-urea and other non-metallic
soaps as the thickening agent are generally superior in
high temperature properties.
However, if different greases must be mixed, at least

greases with the same base oil and thickening agent
should be selected. But even when greases of the same
base oil and thickening agent are mixed, the quality of the
grease may still change due to the difference in additives.
For this reason, changes in consistency and other qualities
should be checked before being applied.
(3) Additives
Various additives are added to greases to improve
various properties and efficiency. For example, there are
anti-oxidents, high-pressure additives (EP additives), rust
preventives, and anti-corrosives.
11.3.2 Amount of grease

The amount of grease used in any given situation will
depend on many factors relating to the size and shape of
the housing, space limitations, bearing's rotating speed
and type of grease used.
For bearings subject to heavy loads and/or shock loads,

a grease containing high-pressure additives should be
used. For comparatively high operating temperatures or
in applications where the grease cannot be replenished
for long periods, a grease with an oxidation stabilizer is
best to use.
As a general rule, housings and bearings should be

only filled from 30% to 60% of their capacities.
Where speeds are high and temperature rises need to
be kept to a minimum, a reduced amount of grease
should be used. Excessive amount of grease cause
temperature rise which in turn causes the grease to
soften and may allow leakage. With excessive grease fills
oxidation and deterioration may cause lubricating
efficiency to be lowered.
(4) Consistency
The consistency of a grease, i.e. the stiffness and
liquidity, is expressed by a numerical index.
The NLGI values for this index indicate the relative
softness of the grease; the larger the number, the stiffer
the grease. The consistency of a grease is determined
by the amount of thickening agent used and the viscosity
of the base oil. For the lubrication of rolling bearings,
greases with the NLGI consistency numbers of 1, 2, and
3 are used.
Moreover, the standard bearing space can be found by

formula (11.1)
VKW (11.1)
where,
V : Quantity of bearing space open type (approx.) cm3
K : Bearing space factor (Table 11.5)
W : Mass of bearing kg
General relationships between consistency and

application of grease are shown in Table 11.4.
A-72
Lubrication
supply interval should be shortened accordingly.
Table 11.5 Bearings space ratio K
Bearing type
Retainer type
Ball bearings 1
Pressed retainer
61
NU-type cylindrical roller bearings 2
Pressed retainer
Machined retainer
50
36
N-type cylindrical roller bearings 3
Pressed retainer
Machined retainer
55
37
Pressed retainer
46
Pressed retainer
Machined retainer
35
28
Generally, for every 10C increase in bearing

temperature above 80C, the relubrication period is
reduced by exponent "1/1.5".
(Example)
Find the grease relubrication time limit for deep
groove ball bearing 6206, with a radial load of
2.0 kN operating at 3,600 r/min.
1 Remove 160 series

2 Remove NU4 series
3 Remove N4 series
Cr / Pr 19.5/2.0 kN 9.8, from Fig. 9.1 the adjusted

load, fL, is 0.96.
From the bearing tables, the allowable speed for
bearing 6206 is 11,000 r/min and the numbers of
revolutions permissible at a radial load of 2.0 kN are
11.3.3 Replenishment
As the lubricating efficiency of grease declines with the
passage of time, fresh grease must be re-supplied at
proper intervals. The replenishment time interval depends
on the type of bearing, dimensions, bearing's rotating
speed, bearing temperature, and type of grease.
no 0.9611,000 10,560 r/min

10,560
no
therefore,
2.93
n
3,600
Using the chart in Fig. 11.2, find the point corresponding

to bore diameter d = 30 (from bearing table) on the
vertical line for radial ball bearings. Draw a straight
horizontal line to vertical line !. Then, draw a straight line
from that point (A in example) to the point on line@ which
corresponds to the no / n value (2.93 in example). The
point, C, where this line intersects vertical line # indicates
the relubrication interval h. In this case the life of the
grease is approximately 5,500 hours.
An easy reference chart for calculating grease

replenishment intervals is shown in Fig. 11.2.
This chart indicates the replenishment interval for
standard rolling bearing grease when used under normal
As operating temperatures increase, the grease re-
no /n
@
20.0
15.0
!
400
300
200
Bearing bore d, mm
100
50
40
30
20
10
7
Relubrication interval, h
#
20,000
10.0
9.0
8.0
7.0
6.0
10,000
5.0
30,000
A
C
500
300
200
Radial ball
bearings
100
200
100
50
30
50
30
20
20
10
5,000
4,000
4.0
3.0
3,000
500
300
200
2,000
2.0
100
50
30
20
1,000
1.5
500
400
300
1.0
Cylindrical roller
bearings
0.9

0.8
0.7
nofactor fLlimiting speed for grease see Fig. 9.1 and bearing tables
n actual rotational speed, r/min
Fig. 11.2 Diagram for relubrication interval of greasing
A-73
Lubrication
11.4 Solid grease (For bearings with solid grease)
11.5 Oil lubrication
"Solid grease" is a lubricant composed mainly of

lubricating grease and ultra-high polymer polyethylene.
Solid grease has the same viscosity as grease at normal
temperature, but by applying a special heat treatment
process, this special grease solidifies retaining a large
proportion of the lubricant within the bearing. The result of
this solidification is that the grease does not easily leak
from the bearing, even when the bearing is subjected to
strong vibrations or centrifugal force.
Bearings with solid grease are available in two types:
the spot-pack type in which solid grease is injected into
the retainer, and the full-pack type in which all empty
space around the rolling elements is filled with solid
grease.
Spot-pack solid grease is standard for deep groove ball
bearings, small diameter ball bearings, and bearing units.
Full-pack solid grease is standard for self-aligning ball
bearings, spherical roller bearings, and needle roller
bearings.
Primary advantages:
(1) Clean working environment with minimal grease
leakage
(2) Low bearing torque with spot-pack type solid grease
Oil lubrication is suitable for applications requiring that

bearing-generated heat or heat applied to the bearing
from other sources be carried away from the bearing and
dissipated to the outside.Table 11.6 shows the main
methods of oil lubrication.
11.5.1 Selection of lubricating oil
Under normal operating conditions, spindle oil, machine
oil, turbine oil, and other mineral oils are widely used for
the lubrication of rolling bearings. However, for
temperatures above 150C or below -30C, synthetic oils
such as diester oil, silicone oil, and fluorocarbon oil are
used.
For lubricating oils, viscosity is one of the most
important properties and determines an oils lubricating
efficiency. If viscosity is too low, formation of the oil film
will be insufficient, and damage will occur to the load
carrying surfaces of the bearing. If viscosity is too high,
viscous resistance will also be great and result in
temperature increases and friction loss. In general, for
higher speed applications a lower viscosity oil should be
used; for heavier load applications, a higher viscosity oil
should be used.
In regard to operating temperature and lubrication,
Table 11.7 lists the required oil viscosity for different
types of rolling bearings. Fig. 11.5 is an oil viscosity operating temperature comparison chart for the purpose
of selecting a lubrication oil with viscosity characteristics
appropriate to an application.
Table 11.8 lists the selection standards for lubricating oil
viscosity with reference to bearing operating conditions.
For more details, please refer to NTN special catalog

of Solid grease bearings.
Solid grease
Table 11.7 Required lubricating oil viscosity for bearings

Dynamic viscosity mm2 /s
Bearing type
Ball bearings, Cylindrical roller bearings,
Spherical roller bearings, Tapered roller
bearings, Needle roller thrust bearings
Self-aligning roller thrust bearings
13
20
30
Fig. 11.3 Deep groove ball bearing with spot-pack solid grease (Z shield)
(Standard for deep groove ball bearings)
3,000
2,000
1:
2:
3:
4:
5:
6:
7:
1,000
500
300
200
100
Viscosity mm2/s
Solid grease
ISO
ISO
ISO
ISO
ISO
ISO
ISO
VG 320
VG 150
VG 68
VG 46
VG 32
VG 22
VG 15
50
30
20
15
1
2
10
8
6
5
3
4
5
7
3
- 30
- 20
- 10
10
20
30
40
50
60
70
80
90
100 110 120 130 140 150 160
Temperature
Fig. 11.4 Spherical roller bearing with full-pack solid grease

(Standard for spherical roller bearings)
FIg. 11.5 Relation between lubricating oil viscosity and

temperature
A-74
Lubrication
Lubrication method
(Oil bath lubrication)
Oil bath lubrication is
the most generally used
method of lubrication
and is widely used for
low to moderate rotation
speed applications.
For horizontal shaft
applications, oil level
should be maintained at
approximately the
center of the lowest
rolling element,
according to the oil
gauge, when the
bearing is at rest. For
vertical shafts at low
speeds, oil level should
be maintained at 50 - 80%
submergence of the
rolling elements.
Example
Lubrication method
(Disc lubrication)
In this method, a
partially submerged disc
rotates and pulls oil up
into a reservoir from
which it then drains
down through the
bearing, lubricating it.
(Oil spray lubrication)

In this method, an
impeller or similar
device mounted on the
shaft draws up oil and
sprays it onto the
bearing. This method
can be used at
considerably high
speeds.
(Oil mist lubrication)

Using pressurized air,
lubricating oil is
atomized before passing
through the bearing.
Due to the low lubricant
resistance, this method
is well suited to high
speed applications.
(Drip lubrication)
(Air-oil lubrication)
In this method, oil is

collected above the
bearing and allowed to
drip down into the
housing where it
becomes a lubricating
mist as it strikes the
rolling elements.
Another version allows
only slight amounts of
oil to pass through the
bearing.
Used at relatively high
speeds for light to
moderate load
applications.
In most cases, oil
volume is a few drops
per minute.
(Circulating lubrication)
In this method, the

required minimum
amount of lubricating oil
is measured and fed to
each bearing at ideal
intervals using
compressed air.
With fresh lubricating oil
constantly being fed to
the bearing, and with
the cooling effect of the
compressed air, bearing
temperature rise can be
minimized.
Because the required oil
quantity is infinitesimal,
the working environment
can be kept clean.
Air-oil lubrication units
are available from NTN.
(Oil jet lubrication)
Used for bearing cooling

applications or for
automatic oil supply
systems in which the oil
supply is centrally
located.
One of the advantages
of this method is that oil
cooling devices and
filters to maintain oil
purity can be installed
within the system.
In order for oil to
thoroughly lubricate the
bearing, oil inlets and
outlets must be provided
on opposite sides of the
bearing.
This method lubricates

by injecting oil under
high pressure directly
into the side of the
bearing. This is a
reliable system for high
speed, high temperature
or otherwise severe
conditions.
Used for lubricating the
bearings in jet engines,
gas turbines, and other
high speed equipment.
Under-race lubrication
for machine tools is one
example of this type of
lubrication.
A-75
Example
Lubrication
Table 11.8 Selection standards for lubricating oils (Reference)

Bearing operating
temperature
C
30
0 60
60100
dn-value
Lubricating oil ISO viscosity grade (VG)

Normal load
Suitable bearing
Heavy load or shock load
2232
46
All types
15,000 Up to
4668
100
All types
15,000 80,000
3246
68
All types
Up to allowable revolutions
80,000 150,000
2232
32
All types but thrust ball bearings
150,000500,000
10
2232
Single row radial ball bearings, cylindrical roller bearings
15,000 Up to
150
220
All types
15,000 80,000
100
150
All types
80,000 150,000
68
100150
All types but thrust ball bearings
150,000500,000
32
68
Single row radial ball bearings, cylindrical roller bearings
100 150
320
0 60
4668
60100
150
All types
Self-aligning roller bearings
Note 1: Applied when lubrication method is either oil bath or circulating lubrication.
2: Please consult NTN Engineering in cases where operating conditions fall outside the range covered by this table.
11.5.2 Oil quantity

In forced oil lubrication systems, the heat radiated away
by the housing and surrounding parts plus the heat
carried away by the lubricating oil is approximately equal
to the amount of heat generated by the bearing and other
sources.
Assume the bearing temperature is approximately

equal to the expelled oil temperature,
from Table 11.9, since K 1
Q1180180cm3 / min
Table 11.9 Factor K
For standard housing applications, the quantity of oil

required can be found by formula (11.2).
Expelled oil temp minus

supplied oil temp C
10 1.5
15 1
20 0.75
25 0.6
QKq (11.2)
where,
Q: Quantity of oil for one bearing cm3/min.
K: Allowable oil temperature rise factor (Table 11.9)
q : Minimum oil quantity cm3/min. (Fig. 11.6)
Because the amount of heat radiated will vary
according to the type of housing, for actual operation it is
advisable that the quantity of oil calculated by formula
(11.2) be multiplied by a factor or 1.5 or 2.0. Then, the
amount of oil can be adjusted to correspond to actual
Furthermore, if it is assumed for calculation purposes
that no heat is radiated by the housing, and that all
bearing heat is removed by the oil, then the value in Fig.
11.3 for shaft diameter, d 0, regardless of actual shaft
diameter.
11.5.3 Relubrication intervals

The intervals at which lubricating oil should be changed
varies depending upon operating conditions, oil quantity,
and type of oil used. In general, for oil bath lubrication
where the operating temperature is 50C or less, oil
should be replaced once a year. When the operating
temperature is between 80C 100C, oil should be
replaced at least every three months. For important
equipment, it is advisable that lubricating efficiency and
oil purity deterioration be checked regularly to determine
when oil replacement is necessary.
(Example) For tapered roller bearing 30220U

mounted on a flywheel shaft with a radial load of 9.5
kN969 kgf, operating at 1,800 r/min, what is the
amount of lubricating oil required to keep the bearing
temperature rise below 15C.
d 100 mm
dn 1001,80018104
From Fig. 11.6 q 180cm3 / min
A-76
Lubrication
00
30,0 00
300 20,0
200
00
10,0
0
0
0
1
7,00
0
7
0
6,00
0
0
0
6
4,0
40
0
3,00
30
0
2,00
20
0
1,50
15
0
1,00
0
1
800
8
600
6
4
2
Fig. 11.6 Oil quantity guidelines
A-77
160
140
100
80
60
40 20
0
400
200
External bearing sealing devices

12. External bearing sealing devices
External seals have two main functions: to prevent
lubricating oil from leaking out, and, to prevent dust, water,
and other contaminants from entering the bearing. When
selecting a seal, the following factors need to be taken into
consideration: the type of lubricant (oil or grease), seal
peripheral speed, shaft fitting errors, space limitations,
seal friction and resultant heat increase, and cost.
Sealing devices for rolling bearings fall into two main
classifications: non-contact seals and contact seals.
action through the contact pressure of a resilient part of

the seal (the lip is often made of synthetic rubber) and
the sealing surface. Contact seals are generally far
superior to non-contact seals in sealing efficiency,
although their friction torque and temperature rise
coefficients are higher. Furthermore, because the lip
portion of a contact seal rotates while in contact with
the shaft, the allowable seal peripheral speed varies
depending on seal type.
Non-contact seals: Non-contact seals utilize a small

clearance between the shaft and the housing cover.
Therefore friction is negligible, making them suitable for
high speed applications.
In order to improve sealing capability, clearance
spaces are often filled with lubricant.
Lubrication is necessary at the contact surface

between the lip portion of the contact seal and the
shaft. Ordinary bearing lubricant can also be used for
this purpose.
The following chart lists the special characteristics of
seals and other points to be considered when choosing
an appropriate seal.
Contact seals: Contact seals accomplish their sealing

Type
Seal construction
Name
Seal characteristics and selection considerations
Clearance seal
This is an extremely simple seal

design with a small radial
clearance.
Oil groove seal
Several concentric oil grooves are

provided on the housing inner
diameter to greatly improve the
sealing effect. When the grooves
are filled with lubricant, the
intrusion of contaminants from the
outside is prevented.
(oil grooves on
housing side)
Oil groove seal
Non-contact seals
(oil grooves on
shaft and housing
side)
Oil grooves are provided on both

the shaft outer diameter and
housing inner diameter for a seal
with even greater sealing
efficiency.
Axial labyrinth
seal
This seal has a labyrinth

passageway on the axial side of
the housing.
Radial
labyrinth seal
A labyrinth passageway is affixed

to the radial side of the housing.
For use with split housings. This
offers better sealing efficiency than
axial labyrinth seals.
Aligning
labyrinth seal
The seal's labyrinth passageway is

slanted and has sufficient
clearance to prevent contact
between the housing projections
and the shaft even as the shaft
realigns.
A-78
Cautionary points regarding selection

In order to improve sealing
efficiency, clearances between the
shaft and housing should be
minimized. However, care should
be taken to confirm shaft/bearing
rigidity and other factors to avoid
direct shaft-housing contact during
operation.
Oil groove clearance (reference)

Shaft diameter mm
Clearance mm
50 Up to 0.20.4
50 or above 0.51.0
Oil groove width, depth (reference)
width : 25 mm
depth : 45 mm
Three or more oil grooves should
be provided.
Sealing efficiency can be further
improved by filling the oil groove
portion with grease of which the
viscosity grade is 150 to 200.
Grease is generally used as the
lubricant for labyrinth seals, and,
except in low speed applications,
is commonly used together with
other sealing devices.

In order to improve sealing
efficiency, labyrinth passageway
clearances should be minimized.
However, care should be taken to
confirm shaft/bearing rigidity, fit,
internal clearances and other
factors to avoid direct contact
between labyrinth projections
during operation.
Labyrinth clearance (reference)

Shaft
Clearance mm
diameter
mm Radial direction Axial direction
50
0.20.4
50200 0.51.0
1.02.0
3.05.0
Sealing efficiency can be further

improved by filling the labyrinth
passageway with grease of which
the viscosity grade is 150 to 200.
Labyrinth seals are suitable for
high speed applications.

Type
Seal construction
Name
Oil comb sleeve
Non-contact seals
Internal slinger
External slinger

In this design, lubricating oil that
makes its way out of the housing
along the shaft is thrown off by
projections on the oil comb sleeve
and recirculated.
By providing a slinger inside the

housing, centrifugal force guides
the lubricant flow back on the
bearing and helps prevent it from
dirtying the work environment.
By mounting a slinger on the outside

of the housing, centrifugal force
helps to prevent dust and other solid
contaminants from entering.
Contact seals
A-79

By installation on the revolving
shaft, these seal types make use
of centrifugal force to aid
lubrication, seal in lubricant, and
prevent the entrance of
contaminants.
Installation of a slinger inside the
housing further enhances the
sealing in of lubricants.
Installation of a slinger on the
outside of the housing will provide
greater protection against dust
and other bearing contaminants.
These seal types are commonly
employed together with other
sealing devices.

Type
Seal construction
Name
Combination seals
Z-seal +
Labyrinth seal
This is an example of an axial labyrinth seal which has been combined with a
Z-seal to increase its sealing efficiency. The axial labyrinth seal is affixed to the
shaft with a setting bolt or other method. In the diagram on the left, both the
direction of the Z-seal and the labyrinth seal are oriented to keep dust and other
contaminants out of the bearing.
Because a Z-seal has been incorporated, the allowable peripheral speed should
not exceed 6 m/s.
Labyrinth seal
+ Oil groove seal
+ Slinger
This is an example of a combination of three different non-contact seals.

It has the advantage of preventing both lubricant leakage from inside the
bearing and infiltration of dust and other contaminants from the outside.
It is widely used on mining equipment and as a sealing system with plummer
blocks in extremely dusty application conditions.
Oil groove seal

+ Slinger
+ Z-seal
This is an example where an oil groove seal and slinger have been
combined with a Z-seal to increase its sealing efficiency. In the diagram on
the left, all three seals have been oriented to keep dust and other
contaminants out of the bearing. The combination is widely used on mining
equipment and as a sealing system with plummer blocks in extremely dusty
application conditions.
A-80
Bearing Materials
13. Bearing Materials
For standard high temperature bearings used at
temperatures from 150C 200C, the addition of silicone
to the steel improves heat resistance and results in a
bearing with excellent rolling fatigue life with minimal
dimensional change or softening at high temperatures.
13.1 Raceway and rolling element materials

While the contact surfaces of a bearing's raceways and
rolling elements are subjected to repeated heavy stress,
they still must maintain high precision and rotational
accuracy. To accomplish this, the raceways and rolling
elements must be made of a material that has high
hardness, is resistant to rolling fatigue, is wear resistant,
and has good dimensional stability. The most common
cause of fatigue cracking in bearings is the inclusion of
non-metallic impurities in the steel. By using pure
materials low in these non-metallic impurities, the rolling
fatigue life of the bearing is lengthened.
A variety of heat resistant steels are also incorporated in

bearings to minimize softening and dimensional changes
when used at high temperatures. Two of these are high
speed molybdenum steel and high speed tungsten steel.
For bearings requiring heat resistance in high speed
applications, there is also heat resistant case hardening
molybdenum steel.
For all NTN bearings, steel low in oxygen content and

non-metallic impurities, then refined by a vacuum
degassing process as well as outside hearth smelting, is
used. For bearings requiring especially high reliability and
long life, steels of even higher in purity, such as vacuum
smelted steel (VIM, VAR, CEVM) and electro-slag melted
steel (ESR), are used.
4) Corrosion resistant bearing steel

For applications requiring high corrosion resistance,
stainless steel is used. To achieve this corrosion
resistance a large proportion of the alloying element
chrome is added to martensite stainless steel.
5) Induction hardened steel
Besides the use of surface hardening steel, induction
hardening is also utilized for bearing raceway surfaces,
and for this purpose mid-carbon steel is used for its lower
carbon content instead of through hardened steel. For
induction hardening of the deep layers required for larger
bearings and bearings with large surface dimensions,
mid-carbon steel is fortified with chrome and molybdenum.
1) High/mid carbon alloy steel

In general, steel varieties which can be hardened not
just on the surface but also deep hardened by the socalled "through hardening method" are used for the
raceways and rolling elements of bearings. Foremost
among these is high carbon chromium bearing steel,
which is widely used. For large type bearings and
bearings with large cross sectional dimensions, induction
hardened bearing steel incorporating manganese or
molybdenum is used. Also in use is mid-carbon chromium
steel incorporating silicone and manganese, which gives
it hardening properties comparable to high carbon
chromium steel.
6) Other bearing materials

For ultra high speed applications and applications
requiring very high level corrosion resistance, ceramic
bearing materials such as Si3N4 are also available.
2) Case hardened (carburized) steel

Because of its combination of a hard surface layer
which has been carburized and hardened to an
appropriate depth, and a relatively pliable inner core,
case hardened steel has excellent efficiency against
shock loads. NTN uses case hardened steel for almost all
of its tapered roller bearings. In terms of case hardened
steel for NTN's other bearings, chromium steel and
chrome molybdenum steel are used for small to medium
sized bearings, and nickel chrome molybdenum steel is
used for large sized bearings.
3) Heat resistant bearing steel
When bearings made of ordinary high carbon chromium
steel which have undergone standard heat treatment are
used at temperatures above 120C for long durations,
unacceptably large dimensional changes can occur. For
this reason, a dimension stabilizing treatment (TS
treatment) has been devised for very high temperature
applications. Through application of this dimension
stabilizing treatment, shortening of rolling fatigue life due
to decreases in bearing hardness at high temperatures
can be avoided. (refer to page insert A-17 3.4.2)
A-81
Bearing Materials
13.2 Cage materials

Bearing cage materials must have the strength to
withstand rotational vibrations and shock loads. These
materials must also have a low friction coefficient, be light
weight, and be able to withstand bearing operation
temperatures.
For small and medium sized bearings, pressed cages of
cold or hot rolled steel with a low carbon content of
approx. 0.1% are used. However, depending on the
application, austenitic stainless steel is also used.
For large bearings, machined cages of machine
structural carbon steel or high tensile cast brass are
widely used, although aluminum alloy and other material
cages are also available.
For aircraft engine bearings, high tensile brass, midcarbon nickel, chrome, or molybdenum steel is used after
undergoing various heat treatments and high
temperature tempering. The sliding properties of these
materials may also be enhanced when silver plated.
Injection molded plastic cages are now widely used:
most are made from fiber glass reinforced heat resistant
polyimide resin. Plastic cages are light weight, corrosion
resistant and have excellent damping and sliding
properties. Heat resistant polyimide resins now
enable the production of cages that perform well in
applications ranging between -40C 120C. However,
they are not recommended for use at temperatures
exceeding 120C.
A-82
Shaft and Housing Design

14. Shaft and Housing Design
Depending upon the design of a shaft or housing, the
shaft may be influenced by an unbalanced load or other
factors which can then cause large fluctuations in bearing
efficiency. For this reason, it is necessary to keep the
following points in mind when designing or choosing the
design for shafts and housings.
14.1 Fixing of bearings

When fixing a bearing in position on a shaft or housing,
there are many instances where the interference fit alone
is not enough to hold the bearing in place. Bearings must
be fixed in place by various methods so that they do not
move axially when placed under load.
Moreover, even bearings which are not subjected to
axial loads (such as cylindrical roller bearings, etc.), must
be fixed in place axially because of the potential for ring
displacement due to momentary loads and resulting shaft
flexure which may cause damage.
Table 14.1 shows general bearing fixing methods, and
Table 14.2 shows fixing methods for bearings with
tapered bores.
1) Bearing arrangement selection; most effective fixing

method for bearing arrangement
2) Suitable shaft and housing fillet radius and abutment
height dimensions
3) Dimensions of fitted surfaces; shape accuracy and
abutment squareness
4) Allowable bearing misalignment; finishing precision
and installation error of shaft and housing suitable
for allowable alignment angle
Table 14.1 General bearing fixing methods

Inner ring clamp
Outer ring clamp
Snap ring
Use of snap rings regulated under JIS B 2804, B 2805, and B 2806,
makes construction very simple. However, interference with
chamfers, bearing installation dimensions, and other related
specifications must be considered carefully.
The most common method of fixing bearings in place is to use

clamping nuts or bolts to hold the bearing or housing abutment
against the ring end face.
Snap rings are not suitable for applications requiring high accuracy
and where the snap ring receives large axial loads.
Table 14.2 Fixing methods for bearings with tapered bores

Adapter sleeve mounting
Withdrawal sleeve mounting
When installing bearings on cylindrical shafts, adapter sleeves or

withdrawal sleeves can be used to fix bearings in place axially.
Split ring mounting
For installation of tapered bore bearings directly on tapered shafts,

the bearing is held in place by a split ring inserted into a groove on
the shaft, and is fixed in place by a split ring nut or screw.
Fixing the bearing axially in this way depends upon friction between
the sleeve and shaft.
A-83
14.2.2 For spacer and ground undercut

In cases where a fillet radius (ra) larger than the bearing
chamfer dimension is required to strengthen the shaft or
to relieve stress concentration (Fig. 14.1a), or where the
shaft abutment height is too low to afford adequate
contact surface with the bearing (Fig. 14.1b), spacers
may be used effectively.
14.2 Bearing fitting dimensions

14.2.1 Abutment height and fillet radius
The shaft and housing abutment height (h) should be
larger than the bearings' maximum allowable chamfer
dimensions (rs max), and the abutment should be
designed so that it directly contacts the flat part of the
bearing end face. The fillet radius must be smaller than
the bearing's minimum allowable chamfer dimension (rs
min) so that it does not interfere with bearing seating.
Table 14.3 lists abutment height (h) and fillet radius (ra).
For bearings to be applied to very large axial loads as
well, shaft abutments (h) should be higher than the values
in the table.
Table 14.3 Fillet radius and abutment height

rs min
ras max
0.05
0.08
0.1
0.15
0.2
0.3
0.6
1
1.1
1.5
2
2.1
2.5
3
4
5
6
7.5
9.5
12
15
19
0.05
0.08
0.1
0.15
0.2
0.3
0.6
1
1
1.5
2
2
2
2.5
3
4
5
6
8
10
12
15
Relief dimensions for ground shaft and housing fitting

surfaces are given in Table 14.4.
Unit mm
hmin
Normal use1
Special use2
0.3
0.3
0.4
0.6
0.8
1.25
2.25
2.75
3.5
4.25
5
6
6
7
9
11
14
18
22
27
32
42
1
2
2.5
3.25
4
4.5
5.5
5.5
6.5
8
10
12
16
20
24
29
38
Table 14.4 Relief dimensions for ground shaft
1 It is necessary to be larger abutment height than the above value

under larger thrust load.
2 The values in this "Special Case" column should be adopted in
cases where the thrust load is extremely small except for tapered
roller bearings angular contact bearings, spherical roller bearings.
Note: ras max maximum allowable fillet radius.
A-84
14.2.3 Thrust bearings and relief dimensions

For thrust bearings, it is necessary to make the raceway
back face sufficiently broad in relation to load and rigidity,
and relief dimensions from the dimension tables should
be adopted. (Figs. 14.2 and 14.3)
For this reason, shaft and abutment heights will be
larger than for radial bearings. (Refer to dimension tables
for all thrust bearing relief dimensions.)
14.4 Allowable bearing misalignment

A certain amount of misalignment of a bearing's inner
and outer rings occurs as a result of shaft flexure, shaft
or housing finishing irregularities, and minor installation
error. In situations where the degree of misalignment is
liable to be relatively large, self-aligning ball bearings,
spherical roller bearings, bearing units and other
bearings with aligning properties are advisable. Although
allowable misalignment will vary according to bearing
type, load conditions, internal clearances, etc., Table
14.6 lists some general misalignment standards for
normal applications. In order to avoid reduced wear life
and cage abrasion, it is necessary to maintain levels of
misalignment below these standard levels.
Table 14.6 Bearing type and allowable misalignment/alignment
allowance
Allowable misalignment
Fig. 14.2

Single row
Multi row
back to back arrangement
Face to face arrangement
Bearing series 2, 3, 4
Bearing series 22, 23, 49, 30
Fig. 14.3
14.3 Shaft and housing accuracy

Table 14.5 shows the accuracies for shaft and housing
fitting surface dimensions and configurations, as well as
fitting surface roughness and abutment squareness for
normal operating conditions.

Single row/back to back arrangement
Face-to-face arrangement
Thrust bearings
excluding
self-aligning roller
thrust bearings
Table 14.5 Shaft and housing accuracy

Characteristics
Dimensional accuracy
Circularity (max.)
Cylindricity
Shaft
Housing
IT6 (IT5)
IT7 (IT5)
IT3
IT4
1/1,0001/300
1/1,000
1/10,000
1/10,000
1/1,000
1/1,000
1/2,000
1/2,000
1/1,000
1/2,000
1/10,000
Alignment allowance
Abutment squareness
IT3
IT3
Fitted
Small size bearings
surface
roughness Mid-large size bearings
0.8a
1.6a
1.6a
3.2a
Note: For precision bearings (P4, P5 accuracy), it is necessary to

increase the circularity and cylindricity accuracies in this table
by approximately 50%. For more specific information, please
consult the NTN precision rolling bearing catalog.
A-85

1/20
1/501/30

Ball bearing units
Without cover
With cover
1/30
1/30
1/50
Bearing Handling
15.2.1 Installation preparations

Bearings should be fitted in a clean, dry work area.
Especially for small and miniature bearings, a "clean
room" should be provided as any contamination particles
in the bearing will greatly affect bearing efficiency.
Before installation, all fitting tools, shafts, housings, and
related parts should be cleaned and any burrs or cutting
chips removed if necessary. Shaft and housing fitting
surfaces should also be checked for roughness,
dimensional and design accuracy, and to ensure that they
are within allowable tolerance limits.
Bearings should not be unwrapped until just prior to
installation. Normally, bearings to be used with grease
lubricant can be installed as 7nd .outips reittinn trl jhey
Bearing Handling
220
50
260
240
40
Diametric expansion of inner ring bore m
240
60
260
280
80
70
Ris
diff e in te
bef erence mp.
hea ore/af
bea ting ter
ring
90
280
200
r6
inner ring
220
30
200
180
180
160
160
140
p6
140
120
n6
120
100
m6
100
80
Removal pawl
Fig. 15.6 Removal of inner ring using an induction heater
80
60
k5
60
40
j5
40
20
20
50
100 150 200 250 300 350 400 450
500 550 600
Bearing bore diameter mm
Fig. 15.5 Temperature differential required for shrinkage fit

of inner ring
the amount of thermal expansion. In any event, bearings

should never be heated above 120C.
The most commonly used method of heating bearings is
to immerse them in hot oil. However, this method should
not be used for prelubricated shielded and sealed bearings.
To avoid overheating parts of the bearings they should
never be brought into direct contact with the heat source,
but instead should be suspended inside the heating tank
or placed on a wire grid.
If bearings are dry-heated with a heating cabinet or hot
plate, they can be mounted without drying.
For heating the inner rings of Nu, NJ or NUP cylindrical
and similar type bearings without any ribs or with only a
single rib, an induction heater can be used to quickly heat
bearings in a dry state (always demagnetize).
When heated bearings are installed on shafts, the
inner rings must be held against the shaft abutment
until the bearing has been cooled in order to prevent
gaps from occurring between the ring and the
abutment face.
As shown in Fig. 15.6, a removal pawl, or tool, can also
be used to dismount the inner ring when using the
induction heating method described above.
a) Installation on tapered bore b) Installation with adapter sleeve
c) Installation using withdrawal sleeve

Fig. 15.7 Installation methods using locknuts
15.2.3 Installation of tapered bore bearings

Small type bearings with tapered bores are installed
over a tapered shaft, withdrawal sleeves, or adapter
sleeves by driving the bearing into place using a locknut.
The locknut is tightened using a hammer or impact
wrench. (Fig. 15.7)
Large size bearings require considerable fitting force
and must be installed hydraulically.
In Fig. 15.8 the fitting surface friction and nut tightening
Fig. 15.8 Installation utilizing oil injection
A-87
Bearing Handling
Fig. 15.10 Installation using hydraulic withdrawal sleeve
Fig. 15.11 Internal clearance measurement method for

spherical roller bearings
torque needed to install bearings with tapered bores

directly onto tapered shafts are decreased by injecting
high pressure oil between the fitting surfaces.
Fig. 15.9 a) shows one method of installation where a
hydraulic nut is used to drive the bearing onto a tapered
shaft.
Fig. 15.9 b) and c) show installation using a hydraulic
nut with adapter sleeves and withdrawal sleeves.
Fig. 15.10 shows an installation method using a
hydraulic withdrawal sleeve.
With tapered bore bearings, as the inner ring is driven
axially onto the shaft or adapter or withdrawal sleeve, the
interference will increase and the bearing internal radial
clearance will decrease. The amount of interference can
be estimated by measuring the amount or radial
clearance decrease. As shown in Fig. 15.11, the internal
radial clearance between the rollers and outer ring of
spherical roller bearings should be measured with a
thickness gauge under no load while the rollers are held
in the correct position. The measured clearance should
be the same for both rows. Instead of using the decrease
in amount of internal radial clearance to estimate the
interference, it is possible to estimate by measuring the
distance the bearing has been driven onto the shaft.
For spherical roller bearings, Table 15.1 indicates the
appropriate interference which will be achieved as a
result of the internal radial clearance decrease, or the
distance the bearing has been driven onto the shaft.
For conditions such as heavy loads, high speeds, or
when there is a large temperature differential between the
inner and outer rings, etc. which necessitate large
A-88
Bearing Handling
Table 15.1 Installation of tapered bore spherical roller bearings

Nominal bearing
bore diameter
d
Over
incl.
Reduction of radial
internal clearance
Units mm
Minimum allowable
residual clearance
Axial displacement drive up

Taper, 1:12
Taper, 1:30
Min
Max
Min
Max
Min
Max
CN
C3
C4
30
40
50
40
50
65
0.02
0.025
0.03
0.025
0.03
0.035
0.35
0.4
0.45
0.4
0.45
0.6
0.015
0.02
0.025
0.025
0.03
0.035
0.04
0.05
0.055
65
80
100
80
100
120
0.04
0.045
0.05
0.045
0.055
0.06
0.6
0.7
0.75
0.7
0.8
0.9
1.75
1.9
2.25
2.25
0.025
0.035
0.05
0.04
0.05
0.065
0.07
0.08
0.1
120
140
160
140
160
180
0.065
0.075
0.08
0.075
0.09
0.1
1.1
1.2
1.3
1.2
1.4
1.6
2.75
3
3.25
3
3.75
4
0.055
0.055
0.06
0.08
0.09
0.1
0.11
0.13
0.15
180
200
225
200
225
250
0.09
0.1
0.11
0.11
0.12
0.13
1.4
1.6
1.7
1.7
1.9
2
3.5
4
4.25
4.25
4.75
5
0.07
0.08
0.09
0.1
0.12
0.13
0.16
0.18
0.2
250
280
315
280
315
355
0.12
0.13
0.15
0.15
0.16
0.18
1.9
2
2.4
2.4
2.5
2.8
4.75
5
6
6
6.25
7
0.1
0.11
0.12
0.14
0.15
0.17
0.22
0.24
0.26
355
400
450
400
450
500
0.17
0.2
0.21
0.21
0.24
0.26
2.6
3.1
3.3
3.3
3.7
4
6.5
7.75
8.25
8.25
9.25
10
0.13
0.13
0.16
0.19
0.2
0.23
0.29
0.31
0.35
500
560
630
560
630
710
0.24
0.26
0.3
0.3
0.33
0.37
3.7
4
4.6
4.6
5.1
5.7
9.25
10
11.5
11.5
12.5
14.5
0.17
0.2
0.21
0.25
0.29
0.31
0.36
0.41
0.45
710
800
900
800
900
1,000
0.34
0.37
0.41
0.43
0.47
0.53
5.3
5.7
6.3
6.7
7.3
8.2
13.3
14.3
15.8
16.5
18.5
20.5
0.23
0.27
0.3
0.35
0.39
0.43
0.51
0.57
0.64
1,000
1,120
1,120
1,250
0.45
0.49
0.58
0.63
6.8
7.4
8.7
9.4
17
18.5
22.5
24.5
0.32
0.34
0.48
0.54
0.7
0.77
Fig. 15.12 Axial internal clearance adjustment
Shim
Fig. 15.13 Measurement of axial internal clearance adjustment
Fig. 15.14 Internal clearance adjustment using shims
A-89
Bearing Handling
15.4 Post installation running test

To insure that the bearing has been properly installed, a
running test is performed after installation is completed.
The shaft or housing is first rotated by hand and if no
problems are observed a low speed, no load power test is
performed. If no abnormalities are observed, the load
and speed are gradually increased to operating
conditions. During the test if any unusual noise,
vibration, or temperature rise is observed the test should
be stopped and the equipment examined. If necessary,
the bearing should be disassembled for inspection.
To check bearing running noise, the sound can be
amplified and the type of noise ascertained with a
listening instrument placed against the housing. A clear,
smooth and continuous running sound is normal. A high,
metallic or irregular sound indicates some error in
function. Vibration can be accurately checked with a
vibration measuring instrument, and the amplitude and
frequency characteristics measured against a fixed
standard.
Usually the bearing temperature can be estimated from
the housing surface temperature. However, if the bearing
outer ring is accessible through oil inlets, etc., the
temperature can be more accurately measured.
Under normal conditions, bearing temperature rises
with rotation time and then reaches a stable operating
temperature after a certain period of time. If the
temperature does not level off and continues to rise, or if
there is a sudden temperature rise, or if the temperature
is unusually high, the bearing should be inspected.
Fig. 15.15 Puller disassembly
Fig. 15.16 Press disassembly
15.5 Bearing disassembly

Bearings are often removed as part of periodic
inspection procedures or during the replacement of other
parts. However, the shaft and housing are almost always
reinstalled, and in more than a few cases the bearings
themselves are reused. These bearings, shafts, housings,
and other related parts must be designed to prevent
damage during disassembly procedures, and the proper
disassembly tools must be employed. When removing
inner and outer rings which have been installed with
interference fits, the dismounting force should be applied
to that ring only and not applied to other parts of the
bearing, as this may cause internal damage to the
bearing's raceway or rolling elements.
Groove
Groove
Fig. 15.17 Extracting grooves
15.5.1 Disassembly of bearings with cylindrical bores

For small type bearings, the pullers shown in Fig. 15.15
a) and b) or the press method shown in Fig. 15.16 can be
used for disassembly. When used properly, these
methods can improve disassembly efficiency and prevent
damage to bearings.
To facilitate disassembly procedures, attention should
be given to planning the designs of shafts and housings,
such as providing extraction grooves on the shaft and
housing for puller claws as shown Figs. 15.17 and 15.18.
Threaded bolt holes should also be provided in housings
to facilitate the pressing out of outer rings as shown in
Fig. 15.19.
Groove
Fig. 15.18 Extraction groove for outer ring disassembly
A-90
Bearing Handling
Large bearings, installed with tight fits, and having been

in service for a long period of time, will likely have
developed fretting corrosion on fitted surfaces and will
require considerable dismounting force. In such
instances, dismounting friction can be reduced by
injecting oil under high pressure between the shaft and
inner ring surfaces as shown in Fig. 15.20.
For NU, NJ and NUP type cylindrical roller bearings, the
induction heating method shown in Fig. 15.6 can also be
used for easier disassembly of the inner ring. This
method is highly efficient for frequent disassembly of
bearings with identical dimensions.
15.5.2 Disassembly of bearings with tapered bores

Small type bearings with adapters can be easily
disassembled by loosening the locknut and driving the
inner ring off with a metal block as shown in Fig. 15.21.
Bearings which have been installed with withdrawal
sleeves can be disassembled by tightening down the lock
nut as shown in Fig. 15.22.
For large type bearings on tapered shafts, adapters, or
withdrawal sleeves, disassembly is greatly facilitated by
hydraulic methods. Fig. 15.23 shows one method of
hydraulic injection disassembly in which high pressure oil
is injected between the fitted surfaces of the tapered shaft
and bearing.
Metal block
Fig. 15.19 Outer ring disassembly bolt
Fig. 15.21 Disassembly of bearing with adapter
High
pressure oil
High
pressure oil
Fig. 15.20 Disassembly using high pressure oil (hydraulic)
Fig. 15.22 Disassembly of bearing with withdrawal sleeve
Metal block
Fig. 15.23 Disassembly using high pressure oil (hydraulic)
A-91
Bearing Handling
Fig. 15.24 shows two methods of disassembling

bearings with adapters or withdrawal sleeves using a
hydraulic nut. Fig. 15.25 shows a disassembly method
using a hydraulic withdrawal sleeve where high pressure
oil is injected between fitted surfaces and a nut is then
employed to extract the sleeve.
a) Disassembly of adapter sleeve
b) Disassembly of withdrawal sleeve

fig. 15.24 Disassembly using hydraulic nut
Fig. 15.25 Extraction using hydraulic withdrawal sleeve
A-92
Bearing Damage and Corrective Measures

16. Bearing Damage and Corrective Measures
While it is of course impossible to directly observe
bearings in operation, one can get a good idea of how they
are operating by monitoring noise, vibration, temperature
and lubricant condition. Types of damage typically

encountered are presented in Table 16.1.
Table 16.1 Bearing damage and corrective measures

Description
Causes
Correction
The surface of the race

way wearing away.
Conspicuous
hills and valleys
form soon
afterward.
Excessive loads or improper handling.

Improper mounting.
Improper precision in the shaft or housing.
Insufficient clearance.
Contamination.
Rust.
Drop in hardness due to abnormally high
temperatures.
Review application conditions.

Select a different type of bearing.
Reevaluate the clearance.
Improve the precision of the shaft and
housing.
Reevaluate the layout (design) of the
area around the bearing.
Review assembly procedures.
Review lubricant type and lubrication
methods.
Seizure
The bearing heats up and becomes

discolored.
Eventually the bearing will seize up.
Insufficient clearance (including

clearances made smaller by local
deformation).
Insufficient lubrication or improper
lubricant.
Excessive loads (excessive pressure).
Skewed rollers.
Check for proper clearance.

(Increase clearances.)
Riview lubricant type and quantity.
Take steps to prevent misalignment.
Reevaluate the design of the area
around the bearing (including fitting
of the bearing).
Improve assembly procedures.
Cracking and
notching
Localized flaking occurs.

Little cracks or notches appear.
Excessive shock loads.

Excessive interference.
Large flaking.
Friction cracking.
Inadequate abutment or chamfer.
Improper handling. (gouges from large
foreign objects.)

Select proper interference and
review materials.
Improve assembly procedures and
take more care in handling.
Take measures to prevent friction
cracking. (Review lubricant type.)
Reevaluate the design of the area
around the bearing.
Retainer damage
Rivets break or become

loose resulting in retainer damage.
Excessive moment loading.

High speed or excessive speed fluctuations.
Inadequate lubrication.
Impact with foreign objects.
Excessive vibration.
Improper mounting. (Mounted misaligned)
Abnormal temperature rise.
(Plastic retainers)
Review of application conditions.

Reevaluation of lubrication conditions.
Review of retainer type selection.
Take more care in handling.
Investigate shaft and housing rigidity.
Flaking
Reinspect bearings internal

clearances.
Review accuracy of shaft and
housing finish.
Review rigidity of shaft and housing.
Meandering wear
patterns
Abrasion or an irregular, meandering Shaft or housing of insufficient accuracy.

wear pattern left by rolling elements Improper installation - Insufficient shaft
along raceway
or housing rigidity.
surfaces.
Shaft whirling caused by excessive
internal bearing clearances.
Smearing and
scuffing
The surface becomes rough and

some small deposits form.
Scuffing generally
refers to
roughness on the
race collar and the
ends of the rollers.
Entrapped foreign particles.
Roller skewing due to a misaligned
bearing.
Bare spots in the collar oil film due to
large axial loading.
Surface roughness.
Excessive slippage of the rolling elements.
Reevaluation of the lubricant type

and lubrication method.
Review of operating conditions.
Setting of a suitable pre-load.
Improve sealing performance.
Take care to handle the bearing
properly.
The surface becomes either partially

or fully rusted, and occasionally
rust even
occurs along
the rolling
element pitch
lines.
Poor storage conditions.

Poor packaging.
Insufficient rust inhibitor.
Penetration by water, acid, etc.
Handling with bare hands.
Take measures to prevent rusting

while in storage.
Periodically inspect the lubricating oil.
Take care when handling the bearing.
Rust and corrosion
A-93
Bearing Damage and Corrective Measures
Table 16.1 Bearing damage and corrective measures

Description
Causes
Correction
There are two types of fretting.

In one, a rusty wear powder forms
on the mating surfaces.
In the other,
brinelling
indentations
form on the
raceway at the
rolling
element pitch.
Insufficient interference.
Small bearing oscillation angle.
Insufficient lubrication.
Fluctuating loads.
Vibration during transport.
Review the interference and apply a

coat of lubricant.
Pack the inner and outer rings
separately for transport.
When the two cannot be separated,
apply a pre-load.
Select a different kind of lubricant.
Select a different type of bearing.
The surfaces wear and dimensional

deformation results. Wear is often
accompanied by roughness and
scratches.
Entrapment of foreign particles in the

lubricant.
Skewed rollers.
Review lubricant type and lubrication

methods.
Take steps to prevent misalignment.
Electrolytic
corrosion
Pits form on the raceway.

The pits gradually grow into ripples.
Electric current flowing through the rollers. Create a bypass circuit for the
Dents and
scratches
Scoring during assembly, gouges

due to hard foreign objects, and
surface denting
due to
mechanical
shock.
Entrapment of foreign objects.

Bite-in on the flaked-off side.
Dropping or other mechanical shocks
due to careless handling.
Assembled misaligned.
Improve handling and assembly

methods.
Take measures to prevent the
entrapment of foreign objects.
Should the damage have been
caused by little pieces of metal,
thoroughly check all other locations.
Slipping is accompanied by
Slipping or creeping mirrorlike or discolored surfaces on
the ID and OD.
Scuffing may
also occur.
Insufficient interference in the mating

section.
Sleeve not fastened down properly.
Abnormal temperature rise.
Excessive loads.
Reevaluate the interference.

Reevaluate usage conditions.
Review the precision of the shaft
and housing.
Fretting
Wear
Surface matting
Peeling
current.
Insulate the bearing so that current
does not pass through it.
Luster of raceway surfaces is gone;

Infiltration of bearing by foreign matter.
surface is matted, rough, and / or
evenly dimpled.
Surface
covered with
minute dents.
Reevaluation of lubricant type and

lubrication method.
Review sealing mechanisms.
Examine lubrication oil purity.
(filter may be excessively dirty, etc.)
Patches of minute flaking or peeling

(size, approx. 10m).
Innumerable hair-line cracks visible
though not yet peeling.
(This type of damage frequently
seen on roller bearings.)
Reevaluation of lubricant type and

lubrication method.
(to prevent infiltration of foreign
matter)
Take care to operate smoothly.
Infiltration of bearing by foreign matter.

A-94
Technical Data
This data is based on typical dimensions. NTN do not guarantee at this data.
17. Technical data
0.50
0.50
0.40
0.40
Axial internal clearance mm
17.1 Deep groove ball bearing radial internal clearances and axial internal clearances
0.30
0.20
30
68
20
68 15
05
8
6 10
68
68
00
68
0.10
0.08
0.06
0.05
0.003
0.005
0.01
0.02
0.03
0.30
0.10
0.08
0.06
0.05
0.003
0.05
30
60 20
60 15
05
60 10 60
60 00
60
0.20
0.005
0.50
0.50
0.40
0.40
0.30
30
69 0
2
69 15
69 10
69 05
69
00
69
0.08
0.06
0.05
0.003
0.005
0.01
0.02
0.03
0.05
Fig. 17.1.3 Series 60 radial internal/axial internal clearances
fig. 17.1.1 Series 68 radial internal/axial internal clearances
0.10
0.02
Radial internal clearance mm
0.20
0.01
0.03
0.30
0.10
0.08
0.06
0.05
0.003
0.05
30
62 20
62 5
1
62 10
62 05
62
00
62
0.20
0.005
0.01
0.02
0.03
0.05

17.2 Angular contact ball bearing axial load and axial displacement
10
79
79
C
20
79
0C
793
0.03
mm
79
05
C
0.04
5C
Axial displacement
Axial displacement
mm
0.04
0.02
0.01
0
0
0.5
1.0
1.5
2.0
0.03
5
790
0.02
7910
7915
7920
0.01
7930
2.510 N
Axial load
0.5
1.0
1.5
2.0
Axial load
Fig. 17.2.1 Series 79 C axial load and axial displacement
Fig. 17.2.2 Series 79 axial load and axial displacement
A-95
2.510 N
Technical Data
0.01
0.5
1.0
1.5
Axial load
2.0
mm
Axial displacement
Axial displacement mm
00
70
05
70
0.02
7010
5
701
0.01
7020
7030
0.5
1.0
1.5
Axial load
2.0
05
0.5
1.0
1.5
Axial load
2.510 N
2.0
0.03
00
72
0.02
5
720
0
721
7215
0.01
7220
7230
0.5
1.0
1.5
2.510 N
2.0
Axial load
0.04
mm
0.04
0.03
0.02
0B
700
0.01
B
7005
B
7010
Axial displacement
mm
0.01
2.510 N
Axial displacement
30
0.04
0.03
7015B 7020B
7030B
72
0.04
C C
C
10 215
20
7
72
72
0.02
2.510 N
0C
0.02
0.03
72
C
15 0C
70 702 30C
70
720
0
01
0.03
0.04
70
05
C
0C
700
0.04
0.5
1.0
1.5
Axial load
2.0
0.03
0.02
7205B
Fig. 17.2.5 Series 70 B axial load and axial displacement
7210B
0.01
7215
7220
7230B
2.510 N
0B
720
0.5
1.0
1.5
Axial load
2.0
2.510 N
Fig. 17.2.8 Series 72 B axial load and axial displacement
A-96
Technical Data
17.3 Tapered roller bearing axial load and axial displacement
0.02
5X
00
32
T-
0.01
4T-
10X
320
5XU
3201
0XU
3202
0
0
1.0
2.0
4.010 N
3.0
Axial load
FIg. 17.3.1 Series 320 axial load and axial displacement
0.02
U
0X
91
2
3
U
15X
329 XU
20
329
0.01
0
0
1.0
2.0
4.010 N
3.0
Axial load
30
5
31
30
-3
0
4T
4T
0.02
5U
31
30
0.01
20U
303
5D
3030
4T-
10D
4T-303
30315DU
0
0
1.0
2.0
3.0
4.010 N
Axial load
FIg. 17.3.3 Series 303/303 D axial load and axial displacement
A-97
Technical Data
interference derived from the measured valued for the

bearing bore diameter and shaft. This difference is due to
the roughness or variations of the finished surfaces to be
fitted, and therefore it is necessary to assume the
following reductions in effective interference:
17.4 Fitting surface pressure

Table 17.4.1 lists equations for calculating the pressure
and maximum allowable stress between fitting surfaces.
Table 17.4.2 can be used to determine the approximate
average groove diameter for bearing inner and outer
rings.
The effective interference, in other words the actual
interference after fitting, is smaller than the apparent
For ground shafts: 1.0 2.5m

For lathed shafts : 5.0 7.0m
Table 17.4.1 Fitted surface pressure and maximum allowable stress
deff
d
d
1- (
Di
do
Di
Fitted
surface
pressure
Hollow steel shaft/

inner ring fit
P=
deff
1- (d / Di)
1- (do / d)
2
1 - (do / Di)
deff
E
D
MPa
kgf / mm2
Steel housing/
outer ring fit
P=
Maximum
Shaft / inner ring fit
allowable
stress
MPa
kgf / mm2
Housing/
outer ring fit
Deff 1 - (Do / D)
1 - (D / Dh)
t max = P
t max = P
1 - (Do /Dh)
1 + (d / Di)
1 (d / Di)
2
Outer ring inner diameter face maximum

allowable stress
1 (Do / D)
Average groove diameter

Bearing type
Deep groove
ball bearings
All types
Cylindrical
roller bearings1 All types
Spherical
All types
roller bearings
1.05
4d + D
Outer ring ( Do )
0.95
5
0.98
4
2d + D
3
d + 4D
5
3d + D
1.05
d + 3D
4
0.97
Dh
Deff
: Housing inner diameter,

bearing outer diameter
: Outer ring average
groove diameter
: Housing outer diameter
: Effective interference
Inner ring bore diameter face maximum

allowable stress
Table 17.4.2 Average groove diameter
Inner ring ( Di )
Do
: Shaft diameter, inner ring

bore diameter
: Hollow shaft inner
diameter
: Inner ring average groove
diameter
: Effective interference
: Elasticity factor
= 208,000 MPa 21,200 kgf / mm2
d + 4D
5
d: Inner ring bore diameter mm

D: Outer ring outer diameter mm
1 Average groove diameter values shown for double rib type.
A-98
D
Dh
P=
do
d
Solid steel shaft/

inner ring fit
Di
Codes (units: N
kgf
, mm)
Equation
Do
Fit conditions
Pm
2
MPa kgf/mm
250 25
200 20
150 15
kgf/mm2 MPa
5 50
4 40
3 30
20
10
100
10
50
40
5
4
30
20
10
p6
n6
m5
k5
0.5
0.4
5
4
0.3
0.2
0.1
js5
5
20
30
50
70 100
200 300
17.5 Necessary press fit and pullout force

Equations (7.1) and (7.2) below can be used to
calculate the necessary pullout force for press fit for inner
rings and shafts or outer rings and housings.
For shaft and inner rings:
Kd = PdB (7.1)
KD = PDB (7.2)
Where,
Kd : Inner ring press fit or pullout force Nkgf
KD : Outer ring press fit or pullout force Nkgf
P : Fitted surface pressure MPakgf/mm2
(Refer to Table 17.4.1)
d : Shaft diameter, inner ring bore diameter mm
D : Housing inner diameter, outer ring outer
diameter mm
B : Inner or outer ring width
: Sliding friction coefficient (Refer to Table 17.5.1)
Maximum allowable stress
Fitted surface pressure
Technical Data
t max
0.5
500
Nominal bearing bore diameter (Class 0)
mm
Fig. 17.4.1 Average fit interference as it relates to surface

pressure and max. allowable stress
Table 17.5.1 Press fit and pullout sliding friction coefficient
5
4
Pm
0.5
0.4
5
4
0.3
0.2
MPa kgf/mm2
400 40
50
40
30
20
n6
10
m5
k5
js5
p6
20
30
50
70 100
200 300
300
250
200
30
25
20
150
15
100
10
50
40
30
4
3
20
10
Maximum allowable stress
Fitted surface pressure
kgf/mm2 MPa
10 100
t max
500
Nominal bearing bore diameter (Class 0)
mm
Fig. 17.4.2 Maximum fit interference as it relates to surface

pressure and max. allowable stress
A-99
Type
Inner (outer) ring press fit onto cylindrical shaft (bore)

Inner (outer) ring pullout from cylindrical shaft (bore)
Inner ring press fit onto tapered shaft or sleeve
Inner ring pullout from tapered shaft
Sleeve press fit onto shaft/bearing
Sleeve pullout from shaft/bearing
0.12
0.18
0.17
0.14
0.30
0.33
A-100
INDEX OF BEARING TABLES
Deep Groove Ball Bearings B-5

67,68,69,160,60,62,63,64 B-8
Expansion compensating bearings
EC-60,EC-62,EC-63 B-26
Miniature and Extra Small Ball Bearings B-29

Metric system sizes
Inch system sizes
67,68,69,60,62,63,BC B-32
R,RA B-36
With ring grooves, snap rings
SC B-38
Angular Contact Ball Bearings B-41

79,70,72,72B,73,73B B-44
Single and duplex arrangements
78C,79C,70C,72C,73C B-56
High speed single and duplex arrangements

Ultra-high speed angular contact ball bearings
Ceramic ball angular contact ball bearings
Four-point contact ball bearings
BNT0,BNT2,HSB9C,HSB0C B-64
5S-BNT,5S-HSB B-68
QJ2,QJ3 B-70
Double row angular contact ball bearings
52,53 B-72
Self-Aligning Ball Bearings B-77

12(K), 22(K), 13(K), 23(K) B-78
Adapters for self-aligning ball bearings B-84
Cylindrical Roller Bearings B-89

NU,NJ,NUP,N,NF10,2,22,3,23,4 B-92
L type loose rib
HJ2,22,3,23,4 B-110
Multi-row cylindrical roller bearings
NN49(K),NNU49(K),NN30(K),NNU30(K) B-114
Four-row cylindrical roller bearings
4R B-120
B-2
Tapered Roller Bearings B-131

Metric system sizes
329X,320X,330,331,302,322,322C,332,303,303D,313X,323,323C B-138
Inch system sizes B-156
Multi-row tapered roller bearings (outward facing type)
4130,4230,4131,4231,4302,4322,4303,4303D,4323 B-194
Multi-row tapered roller bearings (inward facing type) 3230,3231 B-208
Four-row tapered roller bearings
CR0 B-212
Spherical Roller Bearings B-229

239(K),230(K),240(K30),231(K),241(K30),222(K),232(K),213(K),223(K) B-232
Adapters for spherical roller bearings B-252
Withdrawal sleeves for spherical roller bearings B-257
Thrust Bearings B-265

Single direction type
511,512,513,514 B-270
Double row angular contact thrust ball bearings
5629(M),5620(M) B-274
High speed duplex angular contact thrust ball bearings

HTA9DB,HTA0DB B-278
292,293,294 B-282
B-3
Open type
Shielded type
Sealed type (non-contact)
Expansion Compensating Bearing
1. Design features and special characteristics

Deep groove ball bearings are very widely used. A deep
groove is formed on each inner and outer ring of the bearing
enabling them to sustain radial and axial loads in either
direction as well as well as the complex loads which result
from the combination of these forces. Deep groove ball
bearings are suitable for high speed applications.
In addition to the open type, deep groove ball bearings

come in a number of varieties, including prelubricated
bearings, bearings with one or both sides sealed or shielded,
bearings with snap rings and high capacity specification, etc.
Table 1 shows the construction and special characteristics
of various sealed deep groove ball bearings.
Table 1 Sealed ball bearings: construction and characteristics

Type, code no.
Shielded type
Non-contact type ZZ
Sealed type
Non-contact type LLB
Contact type LLU
Low torque type LLH
Metal shield plate is

affixed to outside ring;
inner ring incorporates
a V-groove and
labyrinth clearance.
Outer ring incorporates

synthetic rubber molded
to a steel plate; seal
edge is aligned with
V-groove along inner
ring surface with
labyrinth clearance.
Outer ring incorporates

synthetic rubber molded
to a steel plate; seal
edge contacts V-groove
along inner ring
surface.
Basic construction the

same as LU type, but
specially designed lip
on edge of seal
prevents penetration by
foreign matter; low
torque construction.
Torque
Low
Low
Rather high
Medium
Dust proofing
Very good
Better than ZZ-type
Excellent
Much better than LLB-type
Water proofing
Poor
Poor
Very good
Very good
High speed capacity
Same as open type
Same as open type
Limited by contact seals
Much better than LLU-type
Allowable temp.range 1
Depends on lubricant
-25 120
-25 110
-25 120
Construction
Performance comparison
1 Please consult NTN Engineering about applications which exceed the allowable temperature range of products listed on this table.
Note : This chart lists double shielded and double sealed bearings, but single shielded (Z) and single sealed (LB, LU, LH) are also available.
Grease lubrication should be used with single shielded and single sealed bearings.
B-5
2. Standard cage types

As shown in Table 2, pressed cages are generally used in
deep groove ball bearings. However, machined cages are
also used in larger sized bearings designed for high speed
applications.
equipped outer ring and the light alloy bearing housing, a

good interference fit can be achieved with stable
performance across a wide temperature range. Another
advantage is a large reduction in the occurrence of outer ring
creeping.
Table 2 Standard cages for deep groove ball bearings

Bearing series
67
68
69
160
60
62
63
64
Pressed cage
Machined cage
6700 6706
6800 6834
6900 6934
1600116052
6000 6052
6200 6244
6300 6344
6403 6416
6836 68600
6936 69500
16056
16072
6056
6084
(1) Allowable load

Maximum allowable load Cp (refer to the table of boundary
dimensions) has been determined in accordance with outer
ring strength; therefore, it is necessary to select a bearing
with a maximum allowable load greater than the largest
anticipated bearing load.
(2) Housing and bearing fit
Table 3 shows the recommended fits for bearings with
light metal alloy housings.
In cases where the bearing is going to be interference fit
with the housing, it is very important not to damage the high
polymer material. Therefore it is essential that the lip of the
housing diameter be given a 1015 chamfer as shown in
Diagram 2.
Furthermore, as shown in Diagram 2, it is also advisable to
apply the interference fit using a press in order not force the
3. Other bearing types

3. 1 Bearings with snap rings
Some bearings accommodate a snap ring which is
attached along the outer diameter of the outer ring. By using
snap rings, positioning in the axial direction is possible and
housing installation is simplified. In addition to open type,
shielded and sealed types are also manufactured. Consult
NTN Engineering.
Table 3 Recommended fits for outer ring and housing bore

Conditions
3. 2 Expansion compensating bearings

Expansion compensating bearings have the same boundary
dimensions as standard bearings, except that a high polymer
material with a large coefficient of thermal expansion has
been inserted along the outer circumference of the outer
ring.
Due to the extremely small difference of thermal expansion
attained between the fitted surfaces of the high polymer
High polymer material
Load type, etc.
Housing material
Rotating outer ring load

Rotating inner ring load;
light load
Direction indeterminate load;
ordinary load
Al alloy
Mg alloy
Other light alloys
Rotating outer ring load;

heavy load
Direction indeterminate load;
shock load
Al alloy
Mg alloy
Other light alloys
0.5mm
over
Suitable
bearing
Housing bore
tolerance class
Deep groove
ball bearing
H6
Cylindrical
roller bearing
Thickwalled type
deep groove
ball bearing
N6
10
15
Diagram 2. Fitting method and housing inner diameter chamfer
Diagram 1. Expansion compensating bearings
B-6
3.4 AC bearings (creep prevention bearings)
bearing into the housing in a misaligned position. (Diagram 2)

(3) Radial internal clearance
Regulations for radial internal clearance are the same as
those for standard deep groove ball bearings. For standard
fit and application conditions, a C3 clearance is used with
this bearing.
For more detailed information concerning this bearing and
the availability of roller bearings contact NTN Engineering.
AC bearings have the same boundary dimensions as

standard bearings with the addition of two O-rings imbedded
in the outside circumference of the outer ring. (Diagram 3)
This bearing has a steel housing, can withstand rotating
outer ring loads, and is suitable for applications where a
"tight fit" is not possible but the fear of creeping exists. With
its capacity for axial load displacement, an AC bearing can
also be installed as a floating side bearing to accommodate
shaft fluctuations. Before installing the bearing into the
housing, high viscosity oil (base oil viscosity, 100 mm2/s or
more) or grease should be applied to the space between the
two O-rings. This lubricant forms a thin oil layer inside the
bearing which prevents contact between the outer ring and
housing, lowers the coefficient of friction, and is still able to
prevent creeping by utilizing the friction force of the O-rings.
3.3 TMB ball bearings

TMB ball bearings have the same boundary dimensions as
standard deep groove ball bearings, but have undergone a
special heat treatment that considerably extends wear life.
These bearings are especially effective in countering
reduced wear life due to the effects of infiltration by dust and
other foreign matter.
TMB ball bearings' special characteristics are identical to
standard bearings at rated loads, but with a bearing
characterization factor of a2 = 2.2
TMB 62 series bearings can be used in place of
standard 63 series bearings enabling lighter weight,
more compact designs
Greater resistance to reduced wear life due to infiltration
by dust and other foreign matter
For dimensional specifications, handling procedures, and

other detailed information concerning AC bearings, contact
NTN Engineering.
O-rings
For dimensional specifications and other detailed

information about TMB ball bearings, contact NTN
Engineering.
Diagram 3. AC bearing
B-7
B
r
r
D
Open type
Shielded type
(ZZ)
Non-contact
sealed type
(LLB, LLF)
Low torque
sealed type
(LLH)
Contact
sealed type
(LLU)
d 1020mm
Boundary dimensions
Basic load ratings

dynamic
mm
d
static
dynamic
kN
1
rs min
Limiting speeds
static
kgf
rNS
min
Cr
Cor
Cr
Cor
rpm
grease
oil
open type open type
ZZ LLB
Z LB
LLH
Bearing numbers
LLU
open
type
nonlow
sealed contact torque contact
type type
type
type
10
15
3
19
5
22
6
26
8
30
9
35 11
0.1
0.3
0.3 0.3
0.3
0.6 0.5
0.6 0.5
0.855
1.83
2.7
4.55
5.10
8.20
0.435
0.925
1.27
1.96
2.39
3.50
87
187
275
465
520
835
44
94
129
200
244
355
10,000
32,000
30,000
29,000
25,000
23,000
12,000
38,000
24,000
36,000
21,000
34,000 25,000 21,000
30,000 21,000 18,000
27,000 20,000 16,000
6700
6800
6900
6000
6200
6300
ZZ
ZZ
ZZ
ZZ
ZZ
LLB LLU
LLB LLU
LLB LLH LLU
LLB LLH LLU
LLB LLH LLU
12
18
4
21
5
24
6
28
7
28
8
32 10
37 12
0.2
0.3
0.3 0.3
0.3
0.3
0.6 0.5
1
0.5
0.930
1.92
2.89
5.10
5.10
6.10
9.70
0.530
1.04
1.46
2.39
2.39
2.75
4.20
95
195
295
520
520
620
990
54
106
149
244
244
280
425
8,300
29,000
27,000
26,000
26,000
22,000
20,000
9,500
35,000
20,000
32,000
19,000
30,000
30,000 21,000 18,000

26,000 20,000 16,000
24,000 19,000 15,000
6701
6801
6901
16001
6001
6201
6301
ZZ
ZZ
ZZ
ZZ
ZZ
LLF
LLB LLU
LLB LLU
LLB LLH LLU

LLB LLH LLU
LLB LLH LLU
15
21
4
24
5
28
7
32
8
32
9
35 11
42 13
0.2
0.3
0.3
0.3
0.3
0.6
1
0.940
2.08
0.3 3.65
5.60
0.3 5.60
0.5 7.75
0.5 11.4
0.585
96
1.26
212
2.00
375
2.83
570
2.83
570
3.60
790
5.45 1,170
59
128
204
289
289
365
555
6,600
26,000
24,000
22,000
22,000
19,000
17,000
7,600
31,000
17,000
28,000
16,000
26,000
26,000 18,000 15,000

23,000 18,000 15,000
21,000 15,000 12,000
6702
6802
6902
16002
6002
6202
6302
ZZ
ZZ
ZZ
ZZ
ZZ
LLF
LLB LLU
LLB LLU
LLB LLH LLU

LLB LLH LLU
LLB LLH LLU
17
23
26
30
35
35
40
47
62
4
5
7
8
10
12
14
17
0.2
0.3
0.3
0.3
0.3
0.6
1
1.1
1.00 0.660
102
67
2.23 1.46
227
149
0.3 4.65 2.58
475
263
6.80 3.35
695
345
0.3 6.80 3.35
695
345
0.5 9.60 4.60
980
465
0.5 13.5
6.55 1,380
665
22.7 10.8
2,320 1,100
5,000
24,000
22,000
20,000
20,000
18,000
16,000
14,000
6,700
28,000
15,000
26,000
14,000
24,000
24,000 16,000 14,000

21,000 15,000 12,000
19,000 14,000 11,000
16,000
6703
6803
6903
16003
6003
6203
6303
6403
ZZ
ZZ
ZZ
ZZ
ZZ
LLF
LLB LLU
LLB LLU
LLB LLH LLU

LLB LLH LLU
LLB LLH LLU
20
27
4
32
7
37
9
42
8
42 12
47 14
52 15
0.2
0.3
0.3
0.3
0.6
1
1.1
1.04
0.3 4.00
0.3 6.40
7.90
0.5 9.40
0.5 12.8
0.5 15.9
5,000
21,000
19,000
18,000
18,000
16,000
14,000
5,700
25,000
13,000
23,000
12,000
21,000
21,000 13,000 11,000

18,000 12,000 10,000
17,000 12,000 10,000
6704
6804
6904
16004
6004
6204
6304
ZZ
ZZ
ZZ
ZZ
ZZ
LLF
LLB LLU
LLB LLU
LLB LLH LLU

LLB LLH LLU
LLB LLH LLU
0.730
106
2.47
410
3.70
650
4.50
810
5.05
955
6.65 1,310
7.90 1,620
74
252
375
455
515
680
805
1 Smallest allowable dimension for chamfer dimension r.
B-8

CY
a
B
rN
b
rNa
r
ro
D D1
ro
ra
Bearing
numbers
2
da
With snap ring
Snap ring groove

dimensions
mm
snap
ring
DX Da
D2
With snap ring groove
snap
ring
groove
CZ
Equivalent bearing load

dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27
1.61
0.10 0.29 1
0 0.56 1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
0.40 0.41
1.05
0.50 0.44
1.00
static
Por0.6Fr0.5Fa
When PorFr use PorFr
Snap ring
dimensions
mm
D1
ro
D2
max
max
min
max
max
max
min
da
max
Abutment and fillet dimensions
Mass
mm
kg
Da
DX
CY
CZ
ras
r Nas
max
approx.
max
min
max
max
approx.
N
5
N
N
NR
5
NR
NR
20.8
1.05 0.8
0.2
28.17 2.06 1.35 0.4

33.17 2.06 1.35 0.4
24.8
34.7
39.7
0.7
1.12
1.12
10.8
12
12
12
14
14
12.5
13
13.5
16
17
14.2
17
20
24
26
31
25.5
35.5
40.5
1.5
2.9
2.9
0.7
1.2
1.2
0.1
0.3
0.3
0.3
0.6
0.6
0.3
0.5
0.5
0.0015
0.005
0.009
0.019
0.032
0.053
5
N
N
NR
5
NR
NR
22.8
30.15
34.77
26.8
36.7
41.3
0.7
1.12
1.12
13.6
14
14
14
14
16
17
13.8
14.5
15
16
17
18.5
16.4
19
22
26
26
28
32
27.5
37.5
42
1.5
2.9
2.9
0.7
1.2
1.2
0.2
0.3
0.3
0.3
0.3
0.6
1
0.3
0.5
0.5
0.002
0.006
0.011
0.019
0.021
0.037
0.06
N
N
N
NR
NR
NR
NR
26.7
1.3
0.95 0.25
30.15 2.06 1.35 0.4

33.17 2.06 1.35 0.4
39.75 2.06 1.35 0.4
30.8
36.7
39.7
46.3
0.85
1.12
1.12
1.12
16.6
17
17
17
17
19
20
16.8
17.5
17.5
19
20
23
19.4
22
26
30
30
31
37
31.5
37.5
40.5
47
1.9
2.9
2.9
2.9
0.9
1.2
1.2
1.2
0.2
0.3
0.3
0.3
0.3
0.6
1
0.3
0.3
0.5
0.5
0.0025
0.007
0.016
0.025
0.03
0.045
0.082
N
N
N
NR
NR
NR
NR
28.7
33.17
38.1
44.6
0.25
0.4
0.4
0.4
32.8
39.7
44.6
52.7
0.85
1.12
1.12
1.12
18.6
19
19
19
19
21
22
23.5
18.8
19.5
20
21
23
25
21.4
24
28
33
33
36
42
55.5
33.5
40.5
45.5
53.5
1.9
2.9
2.9
3.3
0.9
1.2
1.2
1.2
0.2
0.3
0.3
0.3
0.3
0.6
1
1
0.3
0.3
0.5
0.5
0.0025
0.008
0.018
0.032
0.039
0.066
0.115
0.27
N
N
N
N
N
NR
NR
NR
NR
NR
30.7
1.3
0.95 0.25
35.7
1.7
0.95 0.25
39.75 2.06 1.35 0.4

44.6
2.46 1.35 0.4
49.73 2.46 1.35 0.4
34.8
39.8
46.3
52.7
57.9
0.85
0.85
1.12
1.12
1.12
21.6
22
22
22
24
25
26.5
22.3
22.5
24
26
28
28.5
25.4
30
35
40
38
42
45.5
35.5
40.5
47
53.5
58.5
1.9
2.3
2.9
3.3
3.3
0.9
0.9
1.2
1.2
1.2
0.2
0.3
0.3
0.3
0.6
1
1
0.3
0.3
0.5
0.5
0.5
0.0045
0.019
0.036
0.051
0.069
0.106
0.144
1.05
2.06
2.06
1.3
2.06
2.06
2.46
0.8
1.35
1.35
0.95
1.35
1.35
1.35
0.2
0.4
0.4
2 Sealed and shielded bearings are also available. 3 This dimension applies to sealed and shielded bearings. 4 Does not include bearings with snap rings. 5 See page B-38.
B-9
B
r
r
D
Open type
Shielded type
(ZZ)
Non-contact
sealed type
(LLB, LLF)
Low torque
sealed type
(LLH)
Contact
sealed type
(LLU)
d 2035mm
Boundary dimensions
Basic load ratings

dynamic
mm
d
20
72 19
1.1
22
44 12
50 14
56 16
0.6 0.5 9.40

1
0.5 12.9
1.1 0.5 18.4
25
32
37
42
47
47
52
62
80
0.2
0.3
0.3
0.3
0.6
1
1.1
1.5
28
52 12
58 16
68 18
0.6 0.5 12.5

1
0.5 17.9
1.1 0.5 26.7
30
37
42
47
55
55
62
72
90
0.2
0.3
0.3
0.3
1
1
1.1
1.5
32
58 13
65 17
75 20
47
55
62
62
72
80
100
4
7
9
9
13
16
19
23
7
10
9
14
17
21
25
Limiting speeds
static
kgf
rNS
rs min
4
7
9
8
12
15
17
21
dynamic
kN
35
static
min
Cr
28.5
0.3
0.3
0.5
0.5
0.5
0.3
0.3
0.5
0.5
0.5
Cor
13.9
5.05
6.80
9.25
1.10 0.840
4.30 2.95
7.05 4.55
8.35 5.10
10.1
5.85
14.0
7.85
21.2 10.9
34.5 17.5
7.40
9.75
14.0
1.14 0.950
4.70 3.65
7.25 5.00
11.2
7.35
13.2
8.3
19.5 11.3
26.7 15.0
43.5 23.9
Cr
Cor
rpm
grease
oil
open type open type
ZZ LLB
Z LB
LLH
Bearing numbers
LLU
2,900 1,420
12,000 14,000
955
1,320
1,880
17,000 20,000 13,000 10,000

14,000 17,000 12,000 9,700
13,000 15,000 11,000 9,200
515
690
945
4,600
21,000
10,000
19,000
9,800
18,000
18,000 11,000 9,400

15,000 11,000 8,900
14,000
9,700 8,100
12,000
open
type
6404
nonlow
type type
type
type
60/22 ZZ
62/22 ZZ
63/22 ZZ
LLB LLH LLU

LLB LLH LLU
LLB LLH LLU
ZZ
ZZ
ZZ
ZZ
ZZ
LLF
LLB LLU
LLB LLU
LLB LLH LLU

LLB LLH LLU
LLB LLH LLU
60/28 ZZ
62/28 ZZ
63/28 ZZ
LLB LLH LLU

LLB LLH LLU
LLB LLH LLU
112
86
435
300
715
460
855
520
1,030
595
1,430
800
2,160 1,110
3,550 1,780
4,000
18,000
16,000
15,000
15,000
13,000
12,000
10,000
6705
6805
6905
16005
6005
6205
6305
6405
1,270
755
1,830
995
2,730 1,430
14,000 16,000 10,000

12,000 14,000
9,700
11,000 13,000
8,900
8,400
8,100
7,400
117
97
480
370
740
510
1,150
750
1,350
845
1,980 1,150
2,720 1,530
4,400 2,440
3,300
15,000
14,000
13,000
13,000
11,000
10,000
8,800
3,800
18,000
17,000
15,000
15,000
13,000
12,000
10,000
9,200
8,800
7,900
8.800
8,400
7,700
7,300
6,600
6706
6806
6906
16006
6006
6206
6306
6406
ZZ
ZZ
ZZ
ZZ
ZZ
LLF
LLB LLU
LLB LLU
LLB LLH LLU

LLB LLH LLU
LLB LLH LLU
1
0.5 11.8
1
0.5 20.7
1.1 0.5 29.8
8.05
11.6
16.9
1,200
820
2,110 1,190
3,050 1,730
12,000 15,000
11,000 12,000
9,500 11,000
8,700
8,400
7,700
7,200
7,100
6,500
60/32
62/32
63/32
ZZ
ZZ
ZZ
LLB LLH LLU

LLB LLH LLU
LLB LLH LLU
0.3
0.6
0.3
1
1.1
1.5
1.5
4.05
6.85
8.20
10.3
15.3
19.1
31.0
500
975
1,190
1,630
2,620
3,400
5,600
13,000
12,000
12,000
12,000
9,800
8,800
7,800
8,200
7,600
7,300
7,600
7,100
6,800
6,300
6,000
6807
6907
16007
6007
6207
6307
6407
ZZ
ZZ
ZZ
ZZ
ZZ
LLB LLU
LLB LLU
LLB LLH LLU

LLB LLH LLU
LLB LLH LLU
0.3
0.5
0.5
0.5
0.5
4.90
9.55
11.7
16.0
25.7
33.5
55.0
410
695
835
1,050
1,560
1,950
3,150
B-10
16,000
15,000
14,000
14,000
11,000
10,000
9,100

CY
a
rN
rNa
r
ro
D D1
ro
ra
Bearing
numbers
2
snap
ring
N
N
N
NR
NR
NR
41.75
47.6
53.6
N
N
N
N
N
NR
NR
NR
NR
NR
N
N
N
D1
ro
D2
max
min
max
max
max
2.06
2.46
2.46
Mass
mm
kg
Da
DX
CY
CZ
ras
r Nas
max
approx.
max
min
max
max
min
max
26.5
65.5
approx.
0.4
1.12
1.12
1.12
26
27
28.5
26.5
29.5
31
40
45
49.5
49
56.5
62.5
2.9
3.3
3.3
1.2
1.2
1.2
0.6
1
1
0.5
0.5
0.5
0.074
0.117
0.176
35.7
1.3
0.95 0.25
40.7
1.7
0.95 0.25
44.6
2.06 1.35 0.4
49.73 2.46 1.35 0.4
59.61 3.28 1.9
0.6
39.8
44.8
52.7
57.9
67.7
0.85
0.85
1.12
1.12
1.7
26.6
27
27
27
29
30
31.5
33
27.3
28
29
30.5
32
35
30.4
35
40
45.0
43
47
55.5
72
40.5
45.5
53.5
58.5
68.5
1.9
2.3
2.9
3.3
4.6
0.9
0.9
1.2
1.2
1.7
0.2
0.3
0.3
0.3
0.6
1
1
1.5
0.3
0.3
0.5
0.5
0.5
0.005
0.022
0.042
0.06
0.08
0.128
0.232
0.53
NR
NR
NR
49.73
55.6
64.82
57.9
63.7
74.6
1.12
1.12
1.7
32
33
34.5
34
35.5
38.5
48
53
61.5
58.5
64.5
76
2.9
3.3
4.6
1.2
1.2
1.7
0.6
1
1
0.5
0.5
0.5
0.098
0.171
0.284
N
N
N
N
N
NR
NR
NR
NR
NR
40.7
1.3
0.95 0.25
45.7
1.7
0.95 0.25
52.6
2.08 1.35 0.4
59.61 3.28 1.9
0.6
68.81 3.28 1.9
0.6
44.8
49.8
60.7
67.7
78.6
0.85
0.85
1.12
1.7
1.7
31.6
32
32
32
35
35
36.5
38
32.3
33
34
37
39
43
35.4
40
45
53
50
57
65.5
82
45.5
50.5
61.5
68.5
80
1.9
2.3
2.9
4.6
4.6
0.9
0.9
1.2
1.7
1.7
0.2
0.3
0.3
0.3
1
1
1
1.5
0.3
0.3
0.5
0.5
0.5
0.006
0.026
0.048
0.091
0.116
0.199
0.36
0.735
N
N
N
NR
NR
NR
55.6
62.6
71.83
63.7
70.7
81.6
1.12
1.7
1.7
37
37
38.5
39
40
43.5
53
60
68.5
64.5
71.5
83
2.9
4.6
4.6
1.2
1.7
1.7
0.5
0.5
0.5
0.129
0.226
0.382
N
N
N
N
N
NR
NR
NR
NR
NR
45.7
1.3
0.95 0.25
53.7
1.7
0.95 0.25
59.61 2.08 1.9

0.6
68.81 3.28 1.9
0.6
76.81 3.28 1.9
0.6
49.8
57.8
67.7
78.6
86.6
0.85
0.85
1.7
1.7
1.7
37
39
37
40
41.5
43
43
38
40
42
45
47
45
51
60
57
65.5
72
92
50.5
58.5
68.5
80
88
1.9
2.3
3.4
4.6
4.6
0.9
0.9
1.7
1.7
1.7
0.3
0.5
0.5
0.5
0.5
0.029
0.074
0.11
0.155
0.288
0.457
0.952
2.08
3.28
3.28
1.35
1.35
1.9
1.35
1.9
1.9
0.4
0.4
0.4
da
48.3
55.7
61.7
2.06
2.46
3.28
1.35
1.35
1.35

dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27
1.61
0.10 0.29 1
0 0.56 1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
0.40 0.41
1.05
0.50 0.44
1.00
static
Por0.6Fr0.5Fa
Snap ring
dimensions
mm
max
da
With snap ring
Snap ring groove

dimensions
mm
snap
ring
groove
DX Da
D2
CZ
0.4
0.4
0.6
0.4
0.6
0.6
1
1
1
0.3
0.6
0.3
1
1
1.5
1.5
2 Sealed and shielded bearings are also available. 3 This dimension applies to sealed and shielded bearings. 4 Does not include bearings with snap rings.
B-11
B
r
r
D
Shielded type
(ZZ)
Open type
Non-contact
sealed type
(LLB)
Low torque
sealed type
(LLH)
Contact
sealed type
LLU
d 4060mm
Boundary dimensions
Basic load ratings

dynamic
mm
static
dynamic
kN
1
Limiting speeds
static
kgf
rNS
Cor
Cr
Cor
LLU
open
type
nonlow
type type
type
type
rs min
40
52
62
68
68
80
90
110
7
12
9
15
18
23
27
0.3
0.6
0.3
1
1.1
1.5
2
0.3
0.5
0.5
0.5
0.5
5.10
12.2
12.6
16.8
29.1
40.5
63.5
4.40
8.90
9.65
11.5
17.8
24.0
36.5
520
1,240
1,290
1,710
2,970
4,150
6,500
445
910
985
1,170
1,820
2,450
3,750
12,000
11,000
10,000
10,000
8,700
7,800
7,000
14,000
13,000
12,000
12,000
10,000
9,200
8,200
7,300
6,700
6,400
6,700
6,300
6,100
5,600
5,300
6808
6908
16008
6008
6208
6308
6408
ZZ
ZZ
ZZ
ZZ
ZZ
LLB LLU
LLB LLU
LLB LLH LLU

LLB LLH LLU
LLB LLH LLU
45
58
68
75
75
85
100
120
7
12
10
16
19
25
29
0.3
0.6
0.6
1
1.1
1.5
2
0.3
0.5
0.5
0.5
0.5
5.35
13.1
12.9
21.0
32.5
53.0
77.0
4.95
10.4
10.5
15.1
20.4
32.0
45.0
550
1,330
1,320
2,140
3,350
5,400
7,850
500
1,060
1,070
1,540
2,080
3,250
4,600
11,000
9,800
9,200
9,200
7,800
7,000
6,300
12,000
12,000
11,000
11,000
9,200
8,200
7,400
6,500
6,200
5,600
5,900
5,600
5,400
5,200
4,700
6809
6909
16009
6009
6209
6309
6409
ZZ
ZZ
ZZ
ZZ
ZZ
LLB LLU
LLB LLU
LLB LLH LLU

LLB LLH LLU
LLB LLH LLU
50
65
72
80
80
90
110
130
7
12
10
16
20
27
31
0.3
0.6
0.6
1
1.1
2
2.1
0.3
0.5
0.5
0.5
0.5
6.60
13.4
13.2
21.8
35.0
62.0
83.0
6.10
11.2
11.3
16.6
23.2
38.5
49.5
670
1,370
1,350
2,230
3,600
6,300
8,450
620
1,140
1,150
1,690
2,370
3,900
5,050
9,600 11,000
8,900 11,000
8,400 9,800
8,400 9,800
7,100 8,300
6,400 7,500
5,700 6,700
6,000
5,700
5,000
5,300
5,100
5,000
4,700
4,200
6810
6910
16010
6010
6210
6310
6410
ZZ
ZZ
ZZ
ZZ
ZZ
LLB LLU
LLB LLU
LLB LLH LLU

LLB LLH LLU
LLB LLH LLU
55
72
80
90
90
100
120
140
9
13
11
18
21
29
33
0.3
1
0.6
1.1
1.5
2
2.1
0.3
0.5
0.5
0.5
0.5
8.80
16.0
18.6
28.3
43.5
71.5
89.0
8.10
13.3
15.3
21.2
29.2
45.0
54.0
900
1,630
1,900
2,880
4,450
7,300
9,050
825
1,350
1,560
2,170
2,980
4,600
5,500
8,700 10,000
8,200 9,600
7,700 9,000
7,700 9,000
6,400 7,600
5,800 6,800
5,200 6,100
4,800
4,600
4,500
4,300
3,900
6811
6911
16011
6011
6211
6311
6411
ZZ
ZZ
ZZ
ZZ
ZZ
LLB
LLB
LLB
LLB
LLB
LLU
LLU
LLU
LLU
LLU
60
78
85
95
95
110
130
150
10
13
11
18
22
31
35
0.3
1
0.6
1.1
1.5
2.1
2.1
0.3 11.5
0.5 16.4
20.0
0.5 29.5
0.5 52.5
0.5 82.0
102
10.6
14.3
17.5
23.2
36.0
52.0
64.5
1,170
1,670
2,040
3,000
5,350
8,350
10,400
1,080
1,450
1,780
2,370
3,700
5,300
6,550
8,000
7,600
7,000
7,000
6,000
5,400
4,800
4,400
4,300
4,100
3,800
3,600
6812
6912
16012
6012
6212
6312
6412
ZZ
ZZ
ZZ
ZZ
ZZ
LLB
LLB
LLB
LLB
LLB
LLU
LLU
LLU
LLU
LLU
min
Cr
rpm
grease
oil
open type open type
ZZ LLB
Z LB
LLH
Bearing numbers
B-12
9,400
8,900
8,300
8,300
7,000
6,300
5,700

CY
a
B
rN
b
rNa
r
ro
D D1
ro
ra
Bearing
numbers
snap
ring
N
N
N
N
N
NR
NR
NR
NR
NR
N
N
N
N
N
NR
NR
NR
NR
NR
da
With snap ring
Snap ring groove

dimensions
mm
snap
ring
groove
DX Da
D2
CZ
Snap ring
dimensions
mm
D1
ro
D2
max
max
min
max
max
max
min
50.7
1.3
0.95 0.25
60.7
1.7
0.95 0.25
64.82 2.49 1.9

0.6
76.81 3.28 1.9
0.6
86.79 3.28 2.7
0.6
54.8
64.8
74.6
86.6
96.5
0.85
0.85
1.7
1.7
2.46
42
44
42
45
46.5
48
49
43
45
47
51
54
56.7
1.3
0.95 0.25
66.7
1.7
0.95 0.25
71.83 2.49 1.9

0.6
81.81 3.28 1.9
0.6
96.8
3.28 2.7
0.6
60.8
70.8
81.6
91.6
106.5
0.85
0.85
1.7
1.7
2.46
N
N
N
N
N
NR 63.7
1.3
0.95 0.25
NR 70.7
1.7
0.95 0.25
NR 76.81 2.49 1.9

0.6
NR 86.79 3.28 2.7
0.6
NR 106.81 3.28 2.7
0.6
67.8
74.8
86.6
96.5
116.6
N
N
N
N
N
NR 70.7
1.7
0.95 0.25
NR 77.9
2.1
1.3
0.4
NR 86.79 2.87 2.7

0.6
NR 96.8
3.28 2.7
0.6
NR 115.21 4.06 3.1
0.6
N
N
N
N
N
NR 76.2
1.7
1.3
NR 82.9
2.1
1.3
NR 91.82 2.87 2.7

NR 106.81 3.28 2.7
NR 125.22 4.06 3.1
0.4
0.4
0.6
0.6
0.6

dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27
1.61
0.10 0.29 1
0 0.56 1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
0.40 0.41
1.05
0.50 0.44
1.00
static
Por0.6Fr0.5Fa
da
Mass
mm
kg
Da
DX
CY
CZ
ras
r Nas
max
approx.
max
min
max
max
55.5
65.5
76
88
98
1.9
2.3
3.8
4.6
5.4
0.9
0.9
1.7
1.7
2.5
0.3
0.6
0.3
1
1
1.5
2.0
0.3
0.5
0.5
0.5
0.5
0.033
0.11
0.125
0.19
0.366
0.63
1.23
47
49
49
50
51.5
53
54
48
56
61.5
51
64
72
71
52.5 70
83
55.5 78.5 93
61.5 92 108
111
1.9
2.3
3.8
4.6
5.4
0.9
0.9
1.7
1.7
2.5
0.3
0.6
0.6
1
1
1.5
2
0.3
0.5
0.5
0.5
0.5
0.04
0.128
0.171
0.237
0.398
0.814
1.53
0.85
0.85
1.7
2.46
2.46
52
54
54
55
56.5
59
61
54
63
68.5
55.5 68
76
76
57.5 75
88
60
83.5 98
68.5 101 118
119
1.9
2.3
3.8
5.4
5.4
0.9
0.9
1.7
2.5
2.5
0.3
0.6
0.6
1
1
2
2
0.3
0.5
0.5
0.5
0.5
0.052
0.132
0.18
0.261
0.454
1.07
1.88
74.8
84.4
96.5
106.5
129.7
0.85
1.12
2.46
2.46
2.82
57
60
59
61.5
63
64
66
59
70
76
61.5 75
86
86
64
83.5 98
67
92 108
74 111 131.5
129
2.3
2.9
5
5.4
6.5
0.9
1.2
2.5
2.5
2.9
0.3
1
0.6
1
1.5
2
2
0.3
0.5
0.5
0.5
0.5
0.083
0.18
0.258
0.388
0.601
1.37
2.29
82.7
89.4
101.6
116.6
139.7
1.12
1.12
2.46
2.46
2.82
62
65
64
66.5
68
71
71
64.5 76
84
66.5 80
91
91
69
88.5 103
75 102 118
80.5 119 141.5
139
2.5
2.9
5
5.4
6.5
1.2
1.2
2.5
2.5
2.9
0.3
1
0.6
1
1.5
2
2
0.3
0.5
0.5
0.5
0.5
0.106
0.193
0.283
0.414
0.783
1.73
2.77
max
50
58
66
63
73.5
82
101
approx.
B-13
B
r
r
D
Shielded type
(ZZ)
Open type
Non-contact
sealed type
(LLB)
Contact
sealed type
LLU
d 6585mm
Boundary dimensions
Basic load ratings

dynamic
mm
dynamic
kN
Limiting speeds
static
rpm
oil
open type
Z LB
LLU
open
type
nonsealed contact
type
type
Cr
Cor
Cr
Cor
0.5
0.5
0.5
0.5
0.5
11.6
17.4
20.5
30.5
57.5
92.5
111
11.0
16.1
18.7
25.2
40.0
60.0
72.5
1,180
1,770
2,090
3,100
5,850
9,450
11,300
1,120
1,640
1,910
2,570
4,100
6,100
7,400
7,400
7,000
6,500
6,500
5,500
4,900
4,400
8,700
8,200
7,700
7,700
6,500
5,800
5,200
4,100
4,000
3,900
3,600
3,300
6813
6913
16013
6013
6213
6313
6413
ZZ
ZZ
ZZ
ZZ
ZZ
LLB
LLB
LLB
LLB
LLB
LLU
LLU
LLU
LLU
LLU
0.6
1
0.6
1.1
1.5
2.1
3
0.5
0.5
0.5
0.5
0.5
12.1
23.7
24.4
38.0
62.0
104
128
11.9
21.2
22.6
31.0
44.0
68.0
89.5
1,230
2,420
2,480
3,900
6,350
10,600
13,100
1,220
2,160
2,300
3,150
4,500
6,950
9,100
6,900
6,500
6,100
6,100
5,100
4,600
4,100
8,100
7,700
7,100
7,100
6,000
5,400
4,800
3,800
3,700
3,600
3,400
3,100
6814
6914
16014
6014
6214
6314
6414
ZZ
ZZ
ZZ
ZZ
ZZ
LLB
LLB
LLB
LLB
LLB
LLU
LLU
LLU
LLU
LLU
10
16
13
20
25
37
45
0.6
1
0.6
1.1
1.5
2.1
3
0.5
0.5
0.5
0.5
0.5
12.5
24.4
25.0
39.5
66.0
113
138
12.9
22.6
24.0
33.5
49.5
77.0
99.0
1,280
1,310
2,480
2,300
2,540
2,450
4,050
3,400
6,750
5,050
11,600
7,850
14,000 10,100
6,400
6,100
5,700
5,700
4,800
4,300
3,800
7,600
7,200
6,700
6,700
5,600
5,000
4,500
3,600
3,500
3,300
3,200
2,900
6815
6915
16015
6015
6215
6315
6415
ZZ
ZZ
ZZ
ZZ
ZZ
LLB
LLB
LLB
LLB
LLB
LLU
LLU
LLU
LLU
LLU
100
110
125
125
140
170
200
10
16
14
22
26
39
48
0.6
1
0.6
1.1
2
2.1
3
0.5
0.5
0.5
0.5
0.5
12.7
24.9
25.4
47.5
72.5
123
164
13.3
24.0
25.1
40.0
53.0
86.5
125
1,290
1,360
2,540
2,450
2,590
2,560
4,850
4,050
7,400
5,400
12,500
8,850
16,700 12,800
6,000
5,700
5,300
5,300
4,500
4,000
3,600
7,100
6,700
6,200
6,200
5,300
4,700
4,200
3,400
3,200
3,100
3,000
2,700
6816
6916
16016
6016
6216
6316
6416
ZZ
ZZ
ZZ
ZZ
ZZ
LLB
LLB
LLB
LLB
LLB
LLU
LLU
LLU
LLU
LLU
110
120
130
130
150
180
13
18
14
22
28
41
1
1.1
0.6
1.1
2
3
0.5
0.5
0.5
0.5
0.5
18.7
32.0
25.9
49.5
83.5
133
19.0
29.6
26.2
43.0
64.0
97.0
1,910
3,250
2,640
5,050
8,500
13,500
5,700
5,400
5,000
5,000
4,200
3,800
6,700
6,300
5,900
5,900
5,000
4,500
3,100
3,000
2,900
2,800
2,600
6817
6917
16017
6017
6217
6317
ZZ
ZZ
ZZ
ZZ
ZZ
LLB
LLB
LLB
LLB
LLB
LLU
LLU
LLU
LLU
LLU
rs min
65
85
90
100
100
120
140
160
10
13
11
18
23
33
37
0.6
1
0.6
1.1
1.5
2.1
2.1
70
90
100
110
110
125
150
180
10
16
13
20
24
35
42
75
95
105
115
115
130
160
190
80
kgf
Bearing numbers
grease
open type
ZZ LLB
85
static
rNS
min
1,940
3,000
2,670
4,400
6,500
9,850
B-14
contact
type

CY
a
B
rN
b
rNa
r
ro
D D1
ro
ra
Bearing
numbers
2
da
With snap ring
Snap ring groove

dimensions
mm
snap
ring
DX Da
D2
snap
ring
groove
CZ

dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27
1.61
0.10 0.29 1
0 0.56 1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
0.40 0.41
1.05
0.50 0.44
1.00
static
Por0.6Fr0.5Fa
Snap ring
dimensions
mm
D1
ro
D2
max
max
min
max
max
max
min
da
max
Mass
mm
kg
Da
DX
CY
CZ
ras
r Nas
max
approx.
max
min
max
max
approx.
N
N
N
N
N
NR 82.9
1.7
1.3
NR 87.9
2.1
1.3
NR 96.8
2.87 2.7
NR 115.21 4.06 3.1
NR 135.23 4.9
3.1
0.4
0.4
0.6
0.6
0.6
89.4
94.4
106.5
129.7
149.7
1.12
1.12
2.46
2.82
2.82
69
70
69
71.5
73
76
76
70
81
91
71.5 85
96
96
74
93.5 108
80.5 112 131.5
86 129 152
149
2.5
2.9
5
6.5
7.3
1.2
1.2
2.5
2.9
2.9
0.6
1
0.6
1
1.5
2
2
0.5
0.5
0.5
0.5
0.5
0.128
0.206
0.307
0.421
0.99
2.08
3.3
N
N
N
N
N
NR 87.9
1.7
1.3
NR 97.9
2.5
1.3
NR 106.81 2.87 2.7

NR 120.22 4.06 3.1
NR 145.24 4.9
3.1
0.4
0.4
0.6
0.6
0.6
94.4
104.4
116.6
134.7
159.7
1.12
1.12
2.46
2.82
2.82
74
75
74
76.5
78
81
83
75.5
77.5
80.5
85
92.5
86
95
106
103.5
117
139
167
96
106
118
136.5
162
2.5
3.3
5
6.5
7.3
1.2
1.2
2.5
2.9
2.9
0.6
1
0.6
1
1.5
2
2.5
0.5
0.5
0.5
0.5
0.5
0.137
0.334
0.441
0.604
1.07
2.52
4.83
N
N
N
N
N
NR
NR
NR
NR
NR
92.9
1.7
1.3
102.6
2.5
1.3
111.81 2.87 2.7

125.22 4.06 3.1
155.22 4.9
3.1
0.4
0.4
0.6
0.6
0.6
99.4
110.7
121.6
139.7
169.7
1.12
1.12
2.46
2.82
2.82
79
80
79
81.5
83
86
88
80
82.5
85.5
90.5
99
91
100
111
108.5
122
149
177
101
112
123
141.5
172
2.5
3.3
5
6.5
7.3
1.2
1.2
2.5
2.9
2.9
0.6
1
0.6
1
1.5
2
2.5
0.5
0.5
0.5
0.5
0.5
0.145
0.353
0.464
0.649
1.18
3.02
5.72
N
N
N
N
N
NR
NR
NR
NR
NR
97.9
1.7
1.3
107.6
2.5
1.3
120.22 2.87 3.1

135.23 4.9
3.1
163.65 5.69 3.5
0.4
0.4
0.6
0.6
0.6
104.4
115.7
134.7
149.7
182.9
1.12
1.12
2.82
2.82
3.1
84
85
85
88
84
86.5 91.5
89
95.5
91 105
93
96
105
121
118.5
131
159
187
106
117
136.5
152
185
2.5
3.3
5.3
7.3
8.4
1.2
1.2
2.9
2.9
3.1
0.6
1
0.6
1
2
2
2.5
0.5
0.5
0.5
0.5
0.5
0.154
0.373
0.597
0.854
1.4
3.59
6.76
N
N
N
N
N
NR
NR
NR
NR
NR
107.6
2.1
1.3
117.6
3.3
1.3
125.22 2.87 3.1

145.24 4.9
3.1
173.66 5.69 3.5
0.4
0.4
0.6
0.6
0.6
115.7
125.7
139.7
159.7
192.9
1.12
1.12
2.82
2.82
3.1
90
91
91.5 94
89
91.5 97
94 103
98 112
105
113.5
126
123.5
141
167
117
127
141.5
162
195
2.9
4.1
5.3
7.3
8.4
1.2
1.2
2.9
2.9
3.1
1
1
0.6
1
2
2.5
0.5
0.5
0.5
0.5
0.5
0.27
0.536
0.626
0.89
1.79
4.23
B-15

CY
a
B
rN
b
rNa
r
ro
D D1
ro
ra
Bearing
numbers
da
With snap ring
Snap ring groove

dimensions
mm
DX Da
D2
CZ
Snap ring
dimensions
mm
Mass
mm
kg
snap
ring
N
N
N
N
N
NR
NR
NR
NR
NR
112.6
2.1
1.3
122.6
3.3
1.3
135.23 3.71 3.1

155.22 4.9
3.1
183.64 5.69 3.5
0.4
0.4
0.6
0.6
0.6
120.7
130.7
149.7
169.7
202.9
1.12
1.12
2.82
2.82
3.1
95
96
96.5 99
95
98 102
99 109
103 118
110
118.5
135
132
151
177
N
N
N
N
N
NR
NR
NR
NR
NR
117.6
2.1
1.3
127.6
3.3
1.3
140.23 3.71 3.1

163.65 5.69 3.5
193.65 5.69 3.5
0.4
0.4
0.6
0.6
0.6
125.7
135.7
154.7
182.9
212.9
1.12
1.12
2.82
3.1
3.1
100
101.5
100
103
106
108
101
104
109
116
125
N
N
N
N
NR
NR
NR
NR
122.6
2.1
1.3
137.6
3.3
1.9
145.24 3.71 3.1

173.66 5.69 3.5
0.4
0.6
0.6
0.6
130.7
145.7
159.7
192.9
1.12
1.7
2.82
3.1
105
106.5
105
108
111
113
N
N
N
N
NR
NR
NR
NR
127.6
2.1
1.3
142.6
3.3
1.9
155.22 3.71 3.1

183.64 5.69 3.5
0.4
0.6
0.6
0.6
135.7
150.7
169.7
202.9
1.12
1.7
2.82
3.1
N
N
N
N
NR
NR
NR
NR
137.6
2.5
1.9
147.6
3.3
1.9
163.65 3.71 3.5

193.65 5.69 3.5
0.6
0.6
0.6
0.6
145.7
155.7
182.9
212.9
N
N
NR 147.6
2.5
1.9
NR 161.8
3.7
1.9
NR 173.66 3.71 3.5
0.6
0.6
0.6
155.7
171.5
192.9
D1
ro
D2
max
min
max
max
max
da
snap
ring
groove
max

dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27
1.61
0.10 0.29 1
0 0.56 1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
0.40 0.41
1.05
0.50 0.44
1.00
static
Por0.6Fr0.5Fa
Da
DX
CY
CZ
ras
r Nas
max
approx.
max
min
max
max
122
132
152
172
205
2.9
4.1
6.1
7.3
8.4
1.2
1.2
2.9
2.9
3.1
1
1
1
1.5
2
2.5
0.5
0.5
0.5
0.5
0.5
0.285
0.554
0.848
1.02
2.15
4.91
115
123.5
140
137
159
187
127
137
157
185
215
2.9
4.1
6.1
8.4
8.4
1.2
1.2
2.9
3.1
3.1
1
1
1
1.5
2
2.5
0.5
0.5
0.5
0.5
0.5
0.3
0.579
0.885
1.08
2.62
5.67
106
110
110
122
133
120
133.5
145
142
169
202
132
147
162
195
2.9
4.7
6.1
8.4
1.2
1.7
2.9
3.1
1
1
1
1.5
2
2.5
0.5
0.5
0.5
0.5
0.313
0.785
0.91
1.15
3.14
7
110
111.5
110
114
116
118
115
119
125
134
125
138.5
155
151
179
212
137
152
172
205
2.9
4.7
6.1
8.4
1.2
1.7
2.9
3.1
1
1
1
2
2
2.5
0.5
0.5
0.5
0.5
0.33
0.816
1.2
1.59
3.7
8.05
1.7
1.7
3.1
3.1
115
116.5
115
119
121
123
120
126
132
149
135
143.5
165
161
189
227
147
157
185
215
3.9
4.7
6.4
8.4
1.7
1.7
3.1
3.1
1
1
1
2
2
2.5
0.5
0.5
0.5
0.5
0.515
0.849
1.46
1.96
4.36
9.54
1.7
1.7
3.1
125
126.5
125
129 136
145 157
158.5 173
175
171 195
3.9
5.1
6.4
1.7
1.7
3.1
1
1
1
2
0.5
0.5
0.5
0.555
1.15
1.56
2.07
min
max
approx.
B-17
B
r
r
D
Open type
Shielded type
(ZZ)
Contact
sealed type
LLU
d 120170mm
Boundary dimensions
Basic load ratings

dynamic
mm
static
kN
Limiting speeds
dynamic
static
kgf
rpm
grease
oil
open type open type
ZZ
Z
Bearing numbers
LLU
open
type
sealed
type
contact
type
3,400
3,100
2,000
6224
6324
ZZ
LLU
3,700
3,500
3,200
3,200
2,700
2,400
4,300
4,100
3,800
3,800
3,100
2,800
1,900
6826
6926
16026
6026
6226
6326
ZZ
LLU
4,550
7,300
8,650
11,100
15,300
25,100
3,400
3,200
3,000
3,000
2,500
2,200
4,000
3,800
3,500
3,500
2,900
2,600
1,800
6828
6928
16028
6028
6228
6328
ZZ
LLU
4,850
8,650
9,850
12,800
18,000
28,000
5,600
9,200
10,300
12,800
17,100
28,900
3,100
3,000
2,800
2,800
2,300
2,100
3,700
3,500
3,200
3,200
2,700
2,400
1,700
6830
6930
16030
6030
6230
6330
ZZ
LLU
57.0
96.0
108
144
186
286
4,950
8,850
10,100
14,500
18,900
28,300
5,800
9,800
11,000
14,700
19,000
29,200
2,900
2,800
2,600
2,600
2,100
1,900
3,400
3,300
3,000
3,000
2,500
2,300
1,600
6832
6932
16032
6032
6232
6332
ZZ
LLU
70.5
95.5
128
172
223
355
6,100
8,750
12,100
17,200
21,700
33,500
7,200
9,750
13,100
17,600
22,800
36,000
2,700
2,600
2,400
2,400
2,000
1,800
3,200
3,100
2,800
2,800
2,400
2,100
6834
6934
16034
6034
6234
6334
rNS
rs min
min
Cr
Cor
Cr
Cor
120
215
260
40
55
2.1
3
155
207
131
185
15,900
21,100
13,400
18,800
2,900
2,600
130
165
180
200
200
230
280
18
24
22
33
40
58
1.1
1.5
1.1
2
3
4
0.5
0.5
0.5
37.0
65.0
80.0
106
167
229
41.0
67.5
79.5
101
146
214
3,750
6,650
8,150
10,800
17,000
23,400
4,200
6,850
8,100
10,300
14,900
21,800
140
175
190
210
210
250
300
18
24
22
33
42
62
1.1
1.5
1.1
2
3
4
0.5
0.5
38.5
66.5
82.0
110
166
253
44.5
71.5
85.0
109
150
246
3,900
6,800
8,350
11,200
17,000
25,800
150
190
210
225
225
270
320
20
28
24
35
45
65
1.1
2
1.1
2.1
3
4
0.5
47.5
85.0
96.5
126
176
274
55.0
90.5
101
126
168
284
160
200
220
240
240
290
340
20
28
25
38
48
68
1.1
2
1.5
2.1
3
4
0.5
48.5
87.0
99.0
143
185
278
170
215
230
260
260
310
360
22
28
28
42
52
72
1.1
2
1.5
2.1
4
4
60.0
86.0
119
168
212
325
B-18

CY
a
rN
rNa
r
ro
D D1
ro
ra
Bearing
numbers
snap
ring
N
N
NR 161.8
3.3
1.9
NR 176.8
3.7
1.9
NR 193.65 5.69 3.5
0.6
0.6
0.6
N
N
NR 171.8
NR 186.8
3.3
3.7
1.9
1.9
NR 186.8
3.3
NR 196.8
D1
ro
D2
max
max
min
max
max
max
da
min
max
131
133
171.5
186.5
212.9
1.7
1.7
3.1
136.5
138
136.5
139 148
143
146
0.6
0.6
181.5
196.5
1.7
1.7
1.9
0.6
196.5
3.3
1.9
0.6
206.5

dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27
1.61
0.10 0.29 1
0 0.56 1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
0.40 0.41
1.05
0.50 0.44
1.00
static
Por0.6Fr0.5Fa
Snap ring
dimensions
mm
snap
ring
groove
da
With snap ring
Snap ring groove

dimensions
mm
DX Da
D2
CZ
Mass
mm
kg
Da
DX
CY
CZ
ras
r Nas
max
approx.
max
min
max
max
2
2.5
5.15
12.4
158.5 173
172 188
193.5
191 215
217
264
4.7
5.1
8.4
1.7
1.7
3.1
1
1.5
1
2
2.5
3
0.5
0.5
0.5
0.8
1.52
2.31
3.16
5.82
15.3
146.5
148
146.5
149 158
153
156
168.5 183
182 198
203.5
201
237
284
4.7
5.1
1.7
1.7
1
1.5
1
2
2.5
3
0.5
0.5
0.85
1.62
2.45
3.35
7.57
18.5
1.7
156.5
159
156.5
161 169
163
166
183.5 198
201
218.5
214
257
304
4.7
1.7
1
2
1
2
2.5
3
0.5
1.16
2.47
3.07
4.08
9.41
22
1.7
166.5
169
168
171 183
173
176
193.5 208
211
232
229
277
324
4.7
1.7
1
2
1.5
2
2.5
3
0.5
1.23
2.61
3.64
5.05
11.7
26
176.5
179
178
181
186
186
1
2
1.5
2
3
3
1.63
2.74
4.93
6.76
14.5
30.7
143
204
247
208.5
221
252
249
294
344
approx.
B-19
B
ra
ra
r
D
Da
da
Open Type
d 180260mm
Boundary dimensions
Basic load ratings

dynamic
mm
static
Limiting speeds
dynamic
kN
static
kgf
Bearing
numbers
rpm
Cr
Cor
Cr
Cor
grease
open type
1.1
2
2
2.1
4
4
60.5
110
117
189
227
355
73.0
119
134
199
241
405
6,200
11,200
11,900
19,300
23,200
36,000
7,450
12,200
13,600
20,300
24,600
41,500
2,600
2,400
2,300
2,300
1,900
1,700
3,000
2,900
2,700
2,700
2,200
2,000
6836
6936
16036
6036
6236
6336
24
33
31
46
55
78
1.5
2
2
2.1
4
5
73.0
113
134
197
255
355
88.0
127
156
215
281
415
7,450
11,500
13,700
20,100
26,000
36,000
9,000
13,000
15,900
21,900
28,700
42,500
2,400
2,300
2,100
2,100
1,800
1,600
2,900
2,700
2,500
2,500
2,100
1,900
6838
6938
16038
6038
6238
6338
200
250
280
310
310
360
420
24
38
34
51
58
80
1.5
2.1
2
2.1
4
5
74.0
157
142
218
269
410
91.5
168
160
243
310
500
7,550
16,000
14,400
22,200
27,400
42,000
9,300
17,100
16,300
24,800
31,500
51,000
2,300
2,200
2,000
2,000
1,700
1,500
2,700
2,600
2,400
2,400
2,000
1,800
6840
6940
16040
6040
6240
6340
220
270
300
340
340
400
460
24
38
37
56
65
88
1.5
2.1
2.1
3
4
5
76.5
160
181
241
297
410
98.0
180
216
289
365
520
7,800
16,400
18,500
24,600
30,500
42,000
10,000
18,400
22,000
29,400
37,000
53,000
2,100
2,000
1,800
1,800
1,500
1,400
2,400
2,300
2,200
2,200
1,800
1,600
6844
6944
16044
6044
6244
6344
240
300
320
360
360
28
38
37
56
2
2.1
2.1
3
85.0
170
178
249
112
203
217
310
8,650
17,300
18,200
25,400
11,400
20,700
22,100
32,000
1,900
1,800
1,700
1,700
2,200
2,100
2,000
2,000
6848
6948
16048
6048
260
320
360
400
400
28
46
44
65
2
2.1
3
4
87.0
222
227
291
120
280
299
375
8,900
22,600
23,200
29,700
12,200
28,500
30,500
38,500
1,700
1,600
1,500
1,500
2,000
1,900
1,800
1,800
6852
6952
16052
6052
rs min
180
225
250
280
280
320
380
22
33
31
46
52
75
190
240
260
290
290
340
400
B-20
oil
open type
open
type

dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27
1.61
0.10 0.29 1
0 0.56 1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
0.40 0.41
1.05
0.50 0.44
1.00
static
Por0.6Fr0.5Fa
Abutment and fillet

dimensions
Mass
mm
kg
da
Da
ras
min
max
max
approx.
186.5
189
189
191
196
196
218.5
241
271
269
304
364
1
2
2
2
3
3
2.03
4.76
6.49
8.8
15.1
35.6
198
199
199
201
206
210
232
251
281
279
324
380
1.5
2
2
2
3
4
2.62
4.98
6.77
9.18
18.2
41
208
211
209
211
216
220
242
269
301
299
344
400
1.5
2
2
2
3
4
2.73
7.1
8.68
11.9
21.6
46.3
228
231
231
233
236
240
262
289
329
327
384
440
1.5
2
2
2.5
3
4
3
7.69
11.3
15.7
30.2
60.8
249
251
251
253
291
309
349
347
2
2
2
2.5
4.6
8.28
12.1
16.8
269
271
273
276
311
349
387
384
2
2
2.5
3
5
13.9
18.5
25
B-21
B
ra
ra
r
D
Da
da
Open Type
d 280440mm
Boundary dimensions
Basic load ratings

dynamic
mm
static
Limiting speeds
dynamic
kN
static
kgf
Bearing
numbers
rpm
Cr
Cor
grease
open type
177
299
315
420
13,900
23,200
23,700
33,000
18,100
30,500
32,500
43,000
1,600
1,500
1,400
1,400
1,900
1,800
1,600
1,600
6856
6956
16056
6056
162
276
292
355
210
375
410
480
16,500
28,200
29,800
36,000
21,500
38,500
42,000
49,000
1,500
1,400
1,300
1,300
1,700
1,600
1,500
1,500
6860
6960
16060
6060
2.1
3
4
4
168
285
300
370
228
405
440
530
17,200
29,000
30,500
38,000
23,200
41,000
45,000
54,000
1,400
1,300
1,200
1,200
1,600
1,500
1,400
1,400
6864
6964
16064
6064
38
56
57
82
2.1
3
4
5
170
293
340
420
236
430
515
610
17,400
29,800
35,000
42,500
24,000
44,000
52,500
62,500
1,300
1,200
1,100
1,100
1,500
1,400
1,300
1,300
6868
6968
16068
6068
360
440
480
540
540
38
56
57
82
2.1
3
4
5
187
300
350
440
258
455
550
670
19,100
30,500
36,000
44,500
26,300
46,500
56,000
68,000
1,200
1,100
1,100
1,100
1,400
1,300
1,200
1,200
6872
6972
16072
6072
380
480
520
560
46
65
82
2.1
4
5
231
325
455
340
510
725
23,600
33,000
46,500
34,500
52,000
74,000
1,100
1,100
990
1,300
1,200
1,200
6876
6976
6076
400
500
540
600
46
65
90
2.1
4
5
226
335
510
340
535
825
23,100
34,000
52,000
34,500
54,500
84,000
1,100
990
930
1,200
1,200
1,100
6880
6980
6080
420
520
560
620
46
65
90
2.1
4
5
260
340
530
405
560
895
26,500
35,000
54,000
41,500
57,000
91,000
1,000
940
880
1,200
1,100
1,000
6884
6984
6084
440
540
600
46
74
2.1
4
264
365
420
615
26,900
37,500
43,000
63,000
950
890
1,100
1,000
6888
6988
rs min
Cr
Cor
280
350
380
420
420
33
46
44
65
2
2.1
3
4
137
227
232
325
300
380
420
460
460
38
56
50
74
2.1
3
4
4
320
400
440
480
480
38
56
50
74
340
420
460
520
520
B-22
oil
open type
open
type

dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27
1.61
0.10 0.29 1
0 0.56 1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
0.40 0.41
1.05
0.50 0.44
1.00
static
Por0.6Fr0.5Fa
Abutment and fillet

dimensions
Mass
mm
kg
da
Da
ras
min
max
max
289
291
293
296
341
369
407
404
2
2
2.5
3
7.4
14.8
23
31
311
313
316
316
369
407
444
444
2
2.5
3
3
10.5
23.5
32.5
43.8
331
333
336
336
389
427
464
464
2
2.5
3
3
10.9
24.8
34.2
46.1
351
353
356
360
409
447
504
500
2
2.5
3
4
11.5
26.2
47.1
61.8
371
373
376
380
429
467
524
520
2
2.5
3
4
12.3
27.5
49.3
64.7
391
396
400
469
504
540
2
3
4
19.7
39.8
67.5
411
416
420
489
524
580
2
3
4
20.6
41.6
87.6
431
436
440
509
544
600
2
3
4
21.6
43.4
91.1
451
456
529
584
2
3
22.5
60
approx.
B-23
B
ra
ra
r
D
Da
da
Open Type
d 460600mm
Boundary dimensions
Basic load ratings

dynamic
mm
d
static
kN
rs min
460
580
620
56
74
480
600
650
500
Limiting speeds
dynamic
static
kgf
Bearing
numbers
rpm
oil
open type
open
type
900
850
1,100
1,000
6892
6992
55,000
78,500
860
810
1,000
950
6896
6996
33,500
45,500
57,000
82,500
820
770
970
910
68/500
69/500
580
34,000
59,500
770
900
68/530
335
600
34,000
61,500
710
840
68/560
375
705
38,500
72,000
660
780
68/600
Cr
Cor
Cr
Cor
3
4
315
375
515
645
32,000
38,500
52,500
66,000
56
78
3
5
320
430
540
770
32,500
44,000
620
670
56
78
3
5
325
445
560
805
530
650
56
330
560
680
56
600
730
60
B-24
grease
open type

dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27
1.61
0.10 0.29 1
0 0.56 1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
0.40 0.41
1.05
0.50 0.44
1.00
static
Por0.6Fr0.5Fa
Abutment and fillet

dimensions
Mass
mm
kg
da
Da
ras
min
max
max
473
476
567
604
2.5
3
34.8
62.2
493
500
587
630
2.5
4
36.2
73.0
513
520
607
650
2.5
4
37.5
75.5
543
637
2.5
39.5
573
667
2.5
41.5
613
717
2.5
51.7
approx.
B-25
Expansion Compensating Bearings

B
r
r
D
Open type
Shielded type
(ZZ)
Non-contact
sealed type
(LLB)
d 10 50mm
Boundary dimensions
Basic load ratings

dynamic static
dynamic
static
Allowable
load
Limiting speeds
Contact
sealed type
LLU
Bearing numbers
Cr
Cor
Cr
Cor
Cp
Cp
rpm
grease
oil
open type open type
ZZ,LLB
Z,LB
0.3
0.6
0.6
4.55
5.10
8.20
1.96
2.39
3.50
465
520
835
200
244
355
1.65
2.39
3.45
168
244
355
29,000 34,000
25,000 30,000
23,000 27,000
21,000
18,000
16,000
EC-6000 ZZ
EC-6200 ZZ
EC-6300 ZZ
LLB
LLB
LLB
LLU
LLU
LLU
8
10
12
0.3
0.6
1
5.10
6.10
9.70
2.39
2.75
4.20
520
620
990
244
280
425
1.78
2.29
3.65
181
233
375
26,000 30,000
22,000 26,000
20,000 24,000
18,000
16,000
15,000
EC-6001 ZZ
EC-6201 ZZ
EC-6301 ZZ
LLB
LLB
LLB
LLU
LLU
LLU
32
35
42
9
11
13
0.3
0.6
1
5.60
7.75
11.4
2.83
3.60
5.45
570
790
1,170
289
365
555
2.83
2.78
4.40
289
284
450
22,000 26,000
19,000 23,000
17,000 21,000
15,000
15,000
12,000
EC-6002 ZZ
EC-6202 ZZ
EC-6302 ZZ
LLB
LLB
LLB
LLU
LLU
LLU
17
35
40
47
10
12
14
0.3
0.6
1
6.80
9.60
13.5
3.35
4.60
6.55
695
980
1,380
345
465
665
2.88
3.45
6.55
294
350
665
20,000 24,000
18,000 21,000
16,000 19,000
14,000
12,000
11,000
EC-6003 ZZ
EC-6203 ZZ
EC-6303 ZZ
LLB
LLB
LLB
LLU
LLU
LLU
20
42
47
52
12
14
15
0.6
1
1.1
9.40
12.8
15.9
5.05
6.65
7.90
955
1,310
1,620
515
680
805
5.05
6.55
7.90
515
515
805
18,000 21,000
16,000 18,000
14,000 17,000
11,000
10,000
10,000
EC-6004 ZZ
EC-6204 ZZ
EC-6304 ZZ
LLB
LLB
LLB
LLU
LLU
LLU
25
47
52
62
12
15
17
0.6
1
1.1
10.1
14.0
21.2
5.85
7.85
10.9
1,030
595 5.85 595
1,430
800 6.55 665
2,160 1,110 10.9 1,110
15,000 18,000
13,000 15,000
12,000 14,000
9,400
8,900
8,100
EC-6005 ZZ
EC-6205 ZZ
EC-6305 ZZ
LLB
LLB
LLB
LLU
LLU
LLU
30
55
62
72
13
16
19
1
1
1.1
13.2
19.5
26.7
8.30
11.3
15.0
1,350
845 8.30 845
1,980 1,150 9.85 1,000
2,720 1,530 15.0 1,530
13,000 15,000
11,000 13,000
10,000 12,000
7,700
7,300
6,600
EC-6006 ZZ
EC-6206 ZZ
EC-6306 ZZ
LLB
LLB
LLB
LLU
LLU
LLU
35
62
72
80
14
17
21
1
1.1
1.5
16.0
25.7
33.5
10.3
15.3
19.1
1,630 1,050 10.3

2,620 1,560 14.5
3,400 1,950 18.5
1,050
1,480
1,890
12,000 14,000
9,800 11,000
8,800 10,000
6,800
6,300
6,000
EC-6007 ZZ
EC-6207 ZZ
EC-6307 ZZ
LLB
LLB
LLB
LLU
LLU
LLU
40
68
80
90
15
18
23
1
1.1
1.5
16.8
29.1
40.5
11.5
17.8
24.0
1,710 1,170 11.5

2,970 1,820 17.5
4,150 2,450 23.4
1,170
1,780
2,380
10,000 12,000
8,700 10,000
7,800 9,200
6,100
5,600
5,300
EC-6008 ZZ
EC-6208 ZZ
EC-6308 ZZ
LLB
LLB
LLB
LLU
LLU
LLU
45
75
85
100
16
19
25
1
1.1
1.5
21.0
32.5
53.0
15.1
20.4
32.0
2,140 1,540 15.1

3,350 2,080 16.2
5,400 3,250 27.4
1,540
1,660
2,790
9,200 11,000
7,800 9,200
7,000 8,200
5,400
5,200
4,700
EC-6009 ZZ
EC-6209 ZZ
EC-6309 ZZ
LLB
LLB
LLB
LLU
LLU
LLU
50
80
90
110
16
20
27
1
1.1
2
21.8
35.0
62.0
16.6
23.2
38.5
2,230 1,690 16.6

3,600 2,370 22.2
6,300 3,900 33.0
1,690
2,270
3,350
8,400
7,100
6,400
5,000
4,700
4,200
EC-6010 ZZ
EC-6210 ZZ
EC-6310 ZZ
LLB
LLB
LLB
LLU
LLU
LLU
mm
kN
10
26
30
35
8
9
11
12
28
32
37
15
rs min
kgf
kN
kgf
9,800
8,300
7,500
LU,LLU
open
type
non1
1
sealed contact contact
type type type
1 This bearing number is for double sealed and double shielded type bearings, but single sealed and single shielded type are also available. 2 Smallest allowable dimension for chamfer dimension r.
B-26
Expansion Compensating Bearings

dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27
1.61
0.10 0.29 1
0 0.56 1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
0.40 0.41
1.05
0.50 0.44
1.00
static
Por0.6Fr0.5Fa
ra
ra
Da
da
Abutment and fillet

dimensions
mm
da
Mass
kg
open type
3
max
Da
ras
max
max
12
14
14
13.5
16
17
24
26
31
0.3
0.6
0.6
0.019
0.031
0.051
14
16
17
16
17.5
18.5
26
28
32
0.3
0.6
1
0.021
0.036
0.058
17
19
20
19
20.5
23
30
31
37
0.3
0.6
1
0.029
0.043
0.079
19
21
22
21
23
25
33
36
42
0.3
0.6
1
0.037
0.062
0.11
24
25
26.5
26
28
28.5
38
42
45.5
0.6
1
1
0.066
0.101
0.139
29
30
31.5
30.5
32
35
43
47
55.5
0.6
1
1
0.075
0.122
0.223
35
35
36.5
37
39
43
50
57
65.5
1
1
1
0.11
0.191
0.334
40
41.5
43
42
45
47
57
65.5
72
1
1
1.5
0.148
0.277
0.44
45
46.5
48
47
51
54
63
73.5
82
1
1
1.5
0.183
0.352
0.609
50
51.5
53
52.5
55.5
61.5
70
78.5
92
1
1
1.5
0.233
0.391
0.80
55
56.5
59
57.5
60
68.5
75
83.5
101
1
1
2
0.246
0.444
1.03
min
iapprox. j
3 This dimension applies to sealed and shielded bearings.
B-27
Open type
Shielded type
Open type with snap ring

The dimensional range of miniature and extra small ball
bearings is given in Table 1. Boundary dimensions for both
metric and inch systems are in accordance with the
internationally specified ISO and ANSI/ABMA standards. The
most widely used sealed and shielded type ball bearings
have a 12 mm wider width dimension than open type
bearings.
The main variations of these bearings are shown in Table
2. Bearings with snap rings, which simplify the bearing
housing construction and design, have also been serialized
and are listed in dimension tables. Among the most generally
used sealed and shielded bearings are standard ZZ and ZZA
type which incorporate non-contact steel shield plates.
Diagram 1 also shows non-contact type rubber sealed LLB
and resin sealed SSA type bearings, and the contact-type
rubber sealed LLU bearing.
Table 1 Dimensional range

Bearing
Dimensional range
Miniature ball bearings
Nominal outer diameter D9mm
Extra small
ball bearings
Nominal bore diameter d10mm

Nominal outer diameter D9mm
Rubber sealed
(non-contact type)
LLB
Rubber sealed
(contact type)
LLU
Resin sealed
(non-contact type)
SSA
Diagram 1.
Table 2 Main types and construction

Standard type code
Type
Open type
Shielded type
Construction
Metric system
6
BC
6 X X ZZ
W 6 X X ZZ
WBC X X X ZZ
Flange-attached type code

Inch system
Construction
Metric system
Inch system
FL6
FLBC
FLR
RA X X ZZ
FL 6 X X X ZZ
FLW 6 X X X ZZ
FLWBC X X ZZ
FLRA X X ZZ
Note: 1. Representative type codes are shown. For further details, please refer to dimension tables.
2. For shielded type bearings, there are instances where ZA may change to SA depending on the bearing number.
B-29
3. Dimensional and rotational accuracy
Pressed cages are standard for these bearings. However,

molded resin cages are used for some bearings depending
on the application.
The accuracy of miniature and small ball bearings

complies with JIS standards. Accuracy standards are listed
in the Bearings Accuracy clause on page A-31. Flange
accuracies are listed in Table 3.
Table 3 Accuracy of outer ring flanges

Outer diameter
dimensional
tolerance
D1S or D2S
Above Below
Back face
axial runout
Width dimension
tolerance
Width
unevenness
Sea1
Max.
C1S or C2S
Above Below
VC1S or VC2S
Max.
Class 0
Class 6
11
Class 5
Class 4
(see table below)
Class 2
1.5
31
4
1 Nominal outer diameter, 18 mm or less.
Units
Flange nominal
outer diameter
D1 or D2
mm
over up to
incl.
Outside cylindrical
surface runout
relative to back face
SD1
Max.
Accuracy class
ISO standard
Units
Outer diameter
dimensional tolerance
D1S or D2S
Above
Below
10
220
36
10
18
270
43
18
30
330
52
30
50
390
62
B-30
Identical to same
bearing's inner ring
V BS
Identical to same
bearing's inner
ring VBS
5
2.5
1.5
4. Radial internal clearance

Radial internal clearance values should be applied as
listed in the table regarding the Bearing Internal Clearance
and Preload clause on page A-54.
However, for miniature and extra small bearings, the radial
clearance values for high precision bearings given in Table 4
are applied in many cases.

For more specific selection information, please refer to the
NTN Miniature and Extra Small Ball Bearings Catalog, or
contact NTN Engineering.
Table 4 Radial internal clearance for high precision bearings

MIL Standard
Code
Internal
clearance
Tight
C2S
Min.
Max.
0
5
Units
Standard
CNS
Min.
Max.
3
8
CNM
Min.
Max.
5
10
CNL
Min.
Max.
8
13
Loose
C3S
Min.
Max.
10
15
Note: 1. These standards are specified in accordance with MIL 23063. However, NTN codes are shown.
2. Clearance values do not include compensation for measuring load.
B-31
C3M
Min.
Max.
13
20
Extra Loose
C3L
Min.
Max.
20
28
Miniature and Extra Small Ball Bearings

Metric system sizes
B
B
B1
B1
B1
C1
C2
d D1
D2
r
D
Open type
With single shield

(Z)
With double shield

(ZZ)
With flanged
outer ring
(FL)
With flanged outer ring

and single shield
(FLZ)
d 1.55mm
Boundary dimensions
Basic load ratings

dynamic
mm
static
dynamic
N
1
Limiting speeds
static
kgf
rpm
Cor
grease
oil
10.0
17.0
28.0
3.00
5.00
9.00
88,000
79,000
71,000
100,000
93,000
84,000
37.0
51.0
51.0
89.0
89.0
120
125
11.0
17.0
17.0
28.0
28.0
40.0
39.0
4.00
5.00
5.00
9.00
9.00
12.0
13.0
83,000
74,000
74,000
67,000
67,000
59,000
62,000
98,000
87,000
87,000
79,000
79,000
70,000
73,000
153
209
284
284
430
550
59.0
73.0
96.0
96.0
152
174
16.0
21.0
29.0
29.0
44.0
56.0
6.00
7.50
10.0
10.0
16.0
18.0
70,000
65,000
59,000
59,000
56,000
56,000
82,000
76,000
70,000
70,000
66,000
66,000
0.08
0.1
0.15
0.15
0.15
0.15
0.15
242
390
560
560
635
635
640
94.0
130
180
180
219
219
224
25.0
40.0
57.0
57.0
65.0
65.0
65.0
9.50
13.0
18.0
18.0
22.0
22.0
23.0
60,000
58,000
54,000
54,000
50,000
50,000
50,000
71,000
68,000
63,000
63,000
59,000
59,000
58,000
0.6
0.6
1
0.8
1
1
1
0.08
0.08
0.15
0.15
0.15
0.2
0.2
0.3
222
395
640
650
715
970
1,310
1,760
88.0
140
224
235
276
360
490
680
23.0
40.0
65.0
66.0
73.0
99.0
134
179
9.00
14.0
23.0
24.0
28.0
36.0
50.0
69.0
54,000
52,000
49,000
46,000
45,000
43,000
42,000
37,000
63,000
61,000
57,000
55,000
52,000
51,000
49,000
44,000
0.6
0.6
0.8
0.08
0.15
0.15
217
500
715
91.0
211
276
22.0
51.0
73.0
9.50
21.0
28.0
49,000
46,000
45,000
57,000
55,000
52,000
B1
D1
D2
C1
C2
rs min
Cr
Cor
Cr
1.5
4
5
6
1.2
2
2.5
2
2.6
3
5
6.5
7.5
5
6.5
7.5
0.4
0.6
0.6
0.6
0.8
0.8
0.15
0.15
0.15
102
171
274
29.0
51.0
86.0
4
5
5
6
6
7
7
1.2
1.5
2
2.3
2.5
2.5
2.8
2
2.3
2.5
3
3.5
6.1
7.5
7.2
8.5
6.1
7.5
8.5
0.5
0.6
0.6
0.7
0.6
0.8
0.9
0.05
0.08
0.1
0.15
0.15
0.15
0.15
104
171
171
279
279
390
380
2.5
5
6
7
7
8
8
1.5
1.8
3
2.5
2.5
2.8
2.3
2.6
3
3.5
2.8
4
7.1
8.5
9.2
9.5
7.1
8.2
8.5
9.5
0.5
0.7
0.6
0.7
0.8
0.6
0.9
0.9
0.08
0.08
0.15
0.15
0.15
0.15
6
7
8
8
9
9
10
2
2
2.5
3
2.5
3
4
2.5
3
4
4
5
4
7.2
8.1
9.2
9.5
10.2
10.5
11.5
7.2
8.1
9.5
10.6
10.5
11.5
0.6
0.5
0.6
0.7
0.6
0.7
1
0.6
0.8
0.9
0.8
1
1
7
8
9
10
11
12
13
16
2
2
2.5
3
4
4
5
5
2.5
3
4
4
4
4
5
5
8.2
9.2
10.3
11.2
12.5
13.5
15
8.2
9.2
10.3
11.6
12.5
13.5
15
0.6
0.6
0.6
0.6
1
1
1
8
9
10
2
2.5
3
2.5
3
4
9.2
10.2
11.2
9.2
10.2
11.6
0.6
0.6
0.6
B-32

dynamic
PrXFrYFa
Fa
Fa
Fa
Fr e
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27 1
0 0.56 1.61
0.10 0.29
1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
static
Por0.6Fr0.5Fa
B1
C2
ra
ra
ra
D2
da
Da
da

and double shield
(FLZZ)
Bearing numbers
Mass (approx.
mm
open
with single
shield
with double with flanged

shield
outer ring
with flanged OR and with flanged OR and

single shield
double shield
min
g
Da
ras
max
max
max
open
with flanged
outer ring
da
2
68/1.5
69/1.5A
60/1.5
W68/1.5SA
W69/1.5ASA
W60/1.5ZA
SSA
SSA
ZZA
FL68/1.5
FL69/1.5A
FL60/1.5
FLW68/1.5SA
FLW69/1.5ASA
FLW60/1.5ZA
SSA
SSA
ZZA
2.3
2.7
2.7
2.4
2.9
3.0
3.2
3.8
4.8
0.05
0.15
0.15
0.07
0.18
0.35
0.09
0.24
0.42
672
682
BC2-5
692
BC2-6
BC2-7A
602
W682SA
WBC2-5SA
W692SA
W602ZA
SSA
SSA
SSA
ZZA
FL682
FL692
FLBC2-6
FL602
FLW682SA
FLW692SA
FLW602ZA
SSA
SSA
ZZA
2.5
2.8
2.8
3.2
3.2
3.2
3.2
2.6
2.9
2.9
3.3
3.3
3.6
3.7
3.5
4.2
4.2
4.8
4.8
5.8
5.8
0.05
0.08
0.10
0.15
0.15
0.15
0.15
0.06
0.13
0.16
0.31
0.32
0.44
0.54
0.17
0.38
0.38
0.64
67/2.5
68/2.5
69/2.5
BC2.5-8
60/2.5
W67/2.5ZA
W68/2.5ZA
WBC2.5-7ZA
W69/2.5SA
WBC2.5-8ZA
W60/2.5ZA
ZZA
ZZA
ZZA
SSA
ZZA
ZZA
FL68/2.5
FL69/2.5
FLBC2.5-8
FL60/2.5
FLW68/2.5ZA
FLWBC2.5-7ZA
FLW69/2.5SA
FLW60/2.5ZA
ZZA
ZZA
SSA
ZZA
3.1
3.1
3.7
3.7
3.7
3.7
3.3
3.6
4.0
4.0
4.3
4.1
4.4
4.8
5.8
5.8
6.8
6.8
0.08
0.08
0.15
0.15
0.15
0.15
0.11
0.22
3
0.6
0.43
0.57
0.72
0.26
3
0.67
0.53
0.65
0.83
673
683
BC3-8
693
BC3-9
603
623
WA673SA
W683ZA
W693Z
WBC3-9ZA
W603ZA
623ZA
SSA
ZZA
ZZ
ZZA
ZZA
ZZA
FL673
FL683
FLBC3-8
FL693
FLBC3-9
FL603
FL623
FLWA673SA
FLW683ZA
FLW693Z
FLAWBC3-9ZA
FLW603ZA
FL623ZA
SSA
ZZA
ZZ
ZZA
ZZA
ZZA
3.6
3.9
4.2
4.2
4.2
4.2
4.2
4.1
4.1
4.4
4.4
5.0
5.0
5.2
5.4
5.8
6.8
6.8
7.8
7.8
8.8
0.08
0.1
0.15
0.15
0.15
0.15
0.15
0.2
0.33
0.52
0.61
0.71
0.92
1.6
0.26
0.38
0.6
0.72
0.79
1
1.8
674A
BC4-8
684AX50
BC4-10
694
WA674ASA
WBC4-8Z
W684AX50Z
WBC4-10Z
694Z
ZZ
5.2
SSA
ZZ
ZZ
ZZ
FL674A
FLBC4-8
FL684AX50
FLBC4-10
FLWA674ASA
FLWBC4-8Z
FLW684AX50Z
FLAWBC4-10Z
SSA
ZZ
ZZ
ZZ
4.6
4.8
5.0
5.2
5.0
5.0
5.2
6.0
6.4
6.8
7.8
8.8
0.08
0.08
0.1
0.15
0.28
0.38
0.67
1
0.35
0.46
0.76
1.1
8.8
0.85
0.72

3 Values for double shielded bearings shown
B-33
B
B
B1
B1
B1
C1
C2
d D1
D2
r
D
Open type
With single shield

(Z)
With double shield

(ZZ)
With flanged
outer ring
(FL)

and single shield
(FLZ)
d 59mm
Boundary dimensions
Basic load ratings

dynamic
mm
d
B1
D1
static
dynamic
N
D2
C1
C2
rs min
B-34
Cr
Limiting speeds
static
kgf
Cor
Cr
rpm
Cor
grease
oil

dynamic
PrXFrYFa
Fa
Fa
Fa
Fr e
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27 1
0 0.56 1.61
0.10 0.29
1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
static
Por0.6Fr0.5Fa
B1
C2
ra
ra
ra
D2
da
Da
da

and double shield
(FLZZ)
Bearing numbers
Mass (approx.
mm
open
with single
shield

shield
outer ring

single shield
double shield
min
da
2
max
g
Da
ras
max
max
open
with flanged
outer ring
685
695
605
625
635
WBC5-11Z
W685Z
695Z
WBC5-13Z
605Z
625Z
635Z
ZZ
ZZ
ZZ
ZZ
ZZ
ZZ
ZZ
FL685
FL695
FL605
FL625
FLWBC5-11Z
FLW685Z
FL695Z
FLWBC5-13Z
FL605Z
FL625Z
ZZ
ZZ
ZZ
ZZ
ZZ
ZZ
6.2
6.2
6.6
6.6
6.6
7
7
6.8
6.8
6.9
6.9
7.4
7.6
9.5
9.8
9.8
11.4
11.4
12.4
14
17
0.2
0.15
0.2
0.2
0.2
0.3
0.3
1.8
1.1
2.4
3
3.4
3.5
4.8
8
2
1.3
2.7
3
3.7
3.9
5.2
676A
BC6-12
686
696
BC6-16A
606
626
WA676AZ
WBC6-12Z
W686Z
696Z
BC6-16AZ
606Z
626Z
ZZ
ZZ
ZZ
ZZ
ZZ
ZZ
ZZ
FL676A
FLBC6-12
FL686
FL696
FL606
FL626
FLWA676AZ
FLAWBC6-12Z
FLW686Z
FL696Z
FL606Z
FL626Z
ZZ
ZZ
ZZ
ZZ
ZZ
ZZ
6.6
7.2
7.0
7.6
7.6
8
8
6.7
7.9
7.2
7.8
8.0
8.6
9.5
9.2
10.8
11.8
13.4
14.4
15
17
0.1
0.15
0.15
0.2
0.2
0.3
0.3
0.65
1.3
1.9
3.8
5.2
6
8.1
0.74
1.4
2.2
4.3
6.5
9.2
677
BC7-13
687A
697
607
627
WA677ZA
WBC7-13ZA
W687AZ
697Z
607Z
627Z
ZZA
ZZA
ZZ
ZZ
ZZ
ZZ
FL677
FLBC7-13
FL687A
FL697
FLWA677ZA
FLAWBC7-13ZA
FLW687AZ
FL697Z
ZZA
ZZA
ZZ
ZZ
7.8
8.2
8.2
9
9
9
8.1
8.9
8.7
10.0
10.4
12.2
10.2
11.8
12.8
15
17
20
0.1
0.15
0.15
0.3
0.3
0.3
0.67
1.4
2.1
5.2
8
13
0.77
1.5
2.4
5.7
678A
BC8-14
688A
698
608
628
W678AZ
WBC8-14Z
W688AZ
698Z
608Z
628Z
ZZ
ZZ
ZZ
ZZ
ZZ
ZZ
FL678A
FLBC8-14
FL688A
FL698
FL608
FLAW678AZ
FLWBC8-14Z
FLW688AZ
FL698Z
FL608Z
ZZ
ZZ
ZZ
ZZ
ZZ
8.8
9.2
9.6
10
10
10
9.1
9.5
10.0
10.6
12.2
12.1
11.2
12.8
14.4
17
20
22
0.1
0.15
0.2
0.3
0.3
0.3
0.75
1.8
3.1
7.3
12
17
0.86
1.9
3.5
8.4
13
679
689
699
609
629X50
W679ZA
W689Z
699Z
609Z
629X50Z
ZZA
ZZ
ZZ
ZZ
ZZ
FL689
FLW689Z
ZZ
9.8
10.6
11
11
13
10.4
10.7
11.6
13.1
13.9
13.2
15.4
18
22
22
0.1
0.2
0.3
0.3
0.3
1.4
3.2
8.2
14
20
3.6

3 Values for double shielded bearings shown.
B-35

Inch system sizes
B
B
B1
B1
B1
C1
C2
d D1
D1
r
D
Open type
With single shield

(Z)
With double shield

(ZZ)
With flanged
outer ring
(FL)

and single shield
(FLZ)
d 1.9849.525mm
Boundary dimensions
Basic load ratings

dynamic
static
dynamic
Cr
Cor
Cr
mm
d
1.984
6.35
2.380
N
1
Limiting speeds
static
kgf
rpm
Cor
grease
oil
28
67,000
79,000
42.0
152
13
44
4.5
16
73,000
56,000
85,000
66,000
96.0
180
224
224
395
29
57
65
65
117
10
18
23
23
40
59,000
54,000
49,000
49,000
43,000
70,000
63,000
58,000
58,000
51,000
133
34
14
51,000
60,000
395
710
1,310
1,310
143
268
490
490
40
72
134
134
15
27
50
50
49,000
46,000
41,000
41,000
58,000
55,000
48,000
48,000
0.08
0.13
0.3
0.41
210
830
1,480
2,340
94.0
370
615
885
21
84
151
238
9.5
38
63
90
43,000
39,000
36,000
34,000
51,000
46,000
43,000
40,000
0.41
3,300 1,400
31,000
37,000
B1
D1
C1
C2
rs min
2.38
3.571
7.52
0.58
0.79
0.08
279
89.0
4.762
7.938
1.588
2.779
2.38
3.571
5.94
9.12
0.46
0.58
0.79
0.79
0.08
0.13
124
430
3.175
6.35
7.938
9.525
9.525
12.7
2.38
2.779
2.779
3.967
4.366
2.779
3.571
3.571
3.967
4.366
7.52
9.12
10.72
11.18
0.58
0.58
0.53
0.76
0.79
0.79
0.79
0.76
0.08
0.08
0.13
0.3
0.3
284
560
640
640
1,150
3.967
7.938
2.779
3.175
9.12
0.58
0.91
0.08
335
4.762
7.938
9.525
12.7
12.7
2.779
3.175
3.967
4.978
3.175
3.175
4.978
9.12
10.72
14.35
0.58
0.58
1.07
0.91
0.79
1.07
0.08
0.08
0.3
0.3
6.350
9.525
12.7
15.875
19.05
3.175
3.175
4.978
3.175
4.762
4.978
7.142
10.72
13.89
17.53
0.58
0.58
1.07
0.91
1.14
1.07
9.525
22.225
7.142
24.61
1.57
B-36
340
142

dynamic
PrXFrYFa
Fa
Fa
Fa
Fr e
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27 1
0 0.56 1.61
0.10 0.29
1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
static
Por0.6Fr0.5Fa
B1
C2
ra
ra
ra
D1
da
Da
da

and double shield
(FLZZ)
Bearing numbers
Mass (approx.
mm
open
with single
shield

shield
outer ring

da
single shield
double shield
min
max
max
max
open
with flanged
outer ring
Da
ras
R1-4
RA1-4ZA
ZZA
FLR1-4
FLRA1-4ZA
ZZA
2.8
3.3
5.5
0.08
0.35
0.41
R133
R1-5
RA133ZA
RA1-5ZA
ZZA
ZZA
FLR133
FLR1-5
FLRA133ZA
FLRA1-5ZA
ZZA
ZZA
2.9
3.2
3.1
4.3
4
7.1
0.08
0.1
0.12
0.69
0.16
0.76
R144
R2-5
R2-6
R2
RA2
RA144ZA
RA2-5Z
RA2-6ZA
RA2ZA
RA2Z
ZZA
ZZ
ZZA
ZZA
ZZ
FLR144
FLR2-5
FLR2-6
FLR2
FLRA144ZA
FLRA2-5Z
FLRA2-6ZA
FLRA2ZA
ZZA
ZZ
ZZA
ZZA
3.9
4
4
4.8
4.8
4.0
4.4
5.2
5.2
5.4
5.5
7
8.7
7.8
11
0.08
0.08
0.1
0.3
0.3
0.27
0.61
0.88
1.3
2.5
0.33
0.68
0.96
1.5
R155
RA155ZA
ZZA
FLR155
FLRA155ZA
ZZA
4.8
5.3
0.08
0.54
0.61
R156
R166
R3
RA3
RA156Z
R166Z
RA3Z
ZZ
ZZ
ZZ
FLR156
FLR166
FLRA3
FLRA156Z
FLRA166Z
FLRA3Z
ZZ
ZZ
ZZ
5.5
5.6
6.4
6.0
5.6
5.9
7.2
6.4
7
8.7
11
11
0.08
0.08
0.3
0.3
0.44
0.8
2.2
2.4
0.51
0.89
2.7
R168A
R188
R4
R168AZ
RA188ZA
R4Z
RA4Z
AZZ
ZZA
ZZ
ZZ
FLR188
FLR4
FLRA168AZ
FLRA188ZA
FLR4Z
ZZ
ZZA
ZZ
7.1
7.2
8
8.4
7.3
8.2
8.6
9.5
8.7
11.8
14.2
17
0.08
0.1
0.3
0.4
0.6
1.6
4.4
2
11
R6Z
ZZ
FLR6Z
ZZ
11.5
11.9
20.2
0.4
14

3 Values for double shielded bearings shown.
B-37
0.69
1.7
4.8
15

With Ring Grooves,
Snap Rings
a
f
b
rN
r
ro
ro
r
D D1
D2
Snap ring groove

Shielded type
(ZZ)
d 512mm
Boundary dimensions
dynamic
mm
1
Basic load ratings

static
dynamic
static
N
kgf
Snap ring
Shielded type
(ZZ)
Limiting speeds
rpm
rNa
with snap ring groove

shielded type
with snap ring

shielded type
grease
oil
44
52
40,000
39,000
47,000
46,000
SC559ZZN
SC571ZZN
65
110
137
238
37
45
54
90
40,000
39,000
37,000
34,000
47,000
46,000
44,000
40,000
F-SC6A06ZZ1N
SC6A04ZZN
SC6A17ZZN
SC669ZZN
ZZ1NR
ZZNR
ZZNR
ZZNR
585
1,400
128
340
60
142
35,000
32,000
41,000
37,000
SC890ZZN
SC850ZZN
ZZNR
ZZNR
4,550
1,960
465
200
29,000
34,000
SC0039ZZN
ZZNR
5,100
2,390
520
204
26,000
30,000
SC0142ZZN
ZZNR
rs min
13
14
4
5
0.2
0.2
0.1
0.2
1,080
1,330
430
505
110
135
12
13
15
19
4
5
5
6
0.15
0.15
0.2
0.3
0.1
0.1
0.2
0.3
640
1,080
1,350
2,340
365
440
530
885
16
22
5
7
0.2
0.3
0.1
0.4
1,260
3,350
10
26
0.3
0.3
12
28
0.3
0.3
min
Bearing numbers
Cr
Cor
Cr
Cor

Note: "" mark indicates stainless steel is used.
B-38
ZZNR
ZZNR

dynamic
PrXFrYFa
Fa
Fa
Fa
Fr e
Fr e
e
Cor
X Y X
Y
0.010 0.18
2.46
0.020 0.20
2.14
0.040 0.24
1.83
0.070 0.27 1
0 0.56 1.61
0.10 0.29
1.48
0.15 0.32
1.35
0.20 0.35
1.25
0.30 0.38
1.13
static
Por0.6Fr0.5Fa
CY
CZ
r Na
ra
ra
DX
Da
da
Snap ring groove dimensions
Snap ring dimensions
Mass
mm
mm
mm
kg
D1
ro
D2
Da
DX
CY
CZ
ras
rNas with snap ring
max
max
min
max
max
max
min
max
max
(approx.)
max
min
max
max
(approx.)
da
12.15
13.03
0.88
1.28
0.55
0.65
0.2
0.06
15.2
16.13
0.55
0.54
6.6
6.6
6.9
7.4
11.4
12.4
15.9
16.9
1.2
1.6
0.6
0.6
0.2
0.2
0.1
0.2
0.002
0.004
11.15
12.15
14.03
17.9
0.78
1.08
1.03
0.93
0.60
0.55
0.65
0.80
0.02
0.2
0.06
0.2
14.2
15.2
17.2
22.0
0.55
0.55
0.60
0.70
7.2
7.0
7.6
8.0
7.9
7.2
7.8
9.5
10.8
11.8
13.4
17.0
14.9
15.9
17.9
22.8
1.1
1.4
1.4
1.4
0.6
0.6
0.7
0.7
0.15
0.15
0.2
0.3
0.1
0.1
0.2
0.3
0.001
0.002
0.004
0.008
14.95
20.8
0.53
2.35
0.65
0.80
0.05
0.2
18.2
24.8
0.54
0.70
9.6
10.0
10.0
12.7
14.4
20
18.9
25.5
0.9
2.8
0.6
0.7
0.2
0.3
0.1
0.4
0.003
0.013
24.5
2.20
0.90
0.3
28.8
0.85
12
13.5
24
29.5
2.8
0.9
0.3
0.3
0.02
26.44
2.20
0.90
0.3
32.7
0.85
14
16
26
33.4
2.8
0.9
0.3
0.3
0.022
B-39
High speed use angular

contact ball bearing
Ultra high speed use angular
Four-point contact ball
Double row angular contact
contact ball bearing
bearing
ball bearing
Contact angle
1.1 Angular contact ball bearing

Angular contact ball bearings are non-separable type
bearings. The line connecting the contact points of the ball
and inner ring and the ball and outer ring creates an angle
with the line drawn in the radial direction called the contact
angle.
In addition to radial loads, single direction axial loads can
also be accommodated by angular contact ball bearings.
Furthermore, since an axial load is generated from a radial
force, these bearings are generally used in pairs facing each
other. Standard type, high speed use type and ultra high
speed varieties of angular contact ball bearings are available
through NTN, and there are also many duplex varieties. A
bearing accuracy of JIS Class 5 or higher is applied to
duplex type angular contact ball bearings, and in many cases
they are given a preload, in compliance with standard
preload levels, before being used in an application. Table 2
shows information concerning angular contact ball bearings,
and Table 3 shows similar information for duplex angular
contact ball bearings.
Diagram 1.
Table 1 Contact angle and contact angle codes

Contact angle
15
Code
30
40
A1
1 A 30contact angle is standard, and therefore

the code "A" will usually be omitted.
Table 2 Angular contact ball bearing types and characteristics

Type
Design
Characteristics
Standard
type
Available in bearing series 79, 70, 72, 72B, 73, and 73B.
Contact angles: 30and 40 (with B) available.
Standard bearing cage type differs depending on bearing no. (Refer to Table 4)
High speed
use
Available in bearing series 78C, 79C, 70C, 72C, and 73C.

Contact angles: 15
All bearing accuracies JIS Class 5 or higher.
Standard bearing cage type differs depending on bearing no. (Refer to Table 4)
Ultra high speed use
BNT type
HSB type
Available in bearing series HSB9C, HSB0C, BNT0, and BNT2; all boundary dimensions agree with JIS
series dimensions.
Contact angles: 15; HSB type HSB9 and HSB0: 15and 30.
All bearing accuracies JIS Class 5 or higher.
BNT type internal design can be altered; suitable for higher speed applications than high speed use bearings.
HSB series bearings have smaller diameter of balls than high speed use type bearings, so benefit by less
torque for high precision, high speed applications.
The inner ring bore diameter and outer ring inner diameter of the HSB series have a ground undercut on
one side enabling easy oil flow.
For even higher speed applications, there is a bearing in this series equipped with ceramic ball bearings.
For standard cage types refer to Table 4; molded resin cages are also available for some varieties.
B-41

Table 3 Duplex angular contact ball bearings types and characteristics
Duplex type
Back-to-back
duplex
(DB)
Face-to face
duplex
(DF)
Characteristics
Can accommodate radial loads and axial loads in either direction.
Has a large distanceRbetween the acting load center of the bearing, and therefore a large
momentary force load capacity.
Allowable misalignment angle is small.
Can accommodate radial loads and axial loads in either direction.

Has a smaller distanceRbetween the acting load center of the bearing, and therefore a smaller
momentary force load capacity.
Has a larger allowable misalignment angle than back-to-back duplex type.
Can accommodate radial loads and single direction axial loads.
Axial loads are received by both bearings as a set, and therefore heavy axial loads can be
accommodated.
Tandem duplex
(DT)
Note: 1. Duplex bearings are manufactured in a set to specified clearance and preload values, therefore they must be assembled together with
identically numbered bearings and not mixed with other arrangements.
2. Triplex arrangements of angular contact bearings are also available. Consult NTN Engineering for details.
loads, axial loads in either direction, and have a high

capacity for momentary loads as well.
As shown in Diagram 3, sealed and shielded type double
row angular contact ball bearings are also available.
Standard loads vary from those of open type bearings.
1.2 Four-point angular contact ball bearings

Four-point angular contact ball bearings have a contact
angle of 30 and inner rings which are separated in half. As
shown in Diagram 2, when the inner and outer rings receive
a radial load the ball bearings contact the inner and outer
rings at four points. This construction enables a single
bearing to accommodate axial loads from either direction,
and when generally under a simple axial load or heavy axial
load, the bearing functions in reliance on two contact points
like ordinary bearings.
Flush ground
"Flush ground" is the name given to the finishing
method shown in Diagram 4 where the offset of the
front and back faces of the bearing are ground to the
same value. By doing this, a stated clearance or
preload value can be achieved by using bearings with
identical codes for these values, in other words by
combining either DB or DF series bearings. DT series
bearings can also be used in various arrangements to
achieve uniform load distribution.
All BNT type bearings are flush ground, but other
angular contact ball bearing series are not. If it is
necessary to flush grind any of these other bearings,
Diagram 2.
Offset B
Back face
Front face
1.3 Double row angular contact ball bearings

The structure of double row angular contact ball bearings
is designed by arranging two single row angular contact
bearings back-to-back in duplex (DB) to form one united
bearing with a contact angle of 30.
These bearings are capable of accommodating radial
Open type
Shielded type
(ZZ)
Offset A
A=B
Diagram 4.
Non-contact sealed type

(LLB)
Diagram 3.
B-42
Contact sealed type

(LLU)

Table 4 lists the standard cage types for angular contact
ball bearings. For high speed use angular contact ball
bearings, molded resin cages and machined cages are
widely used.
Table 4 Standard cages for angular contact ball bearings

Type Bearing series
7914
7026
7224
7324
7224B
7324B
7960
7040
7240
7340
7240B
7340B
7805C
7834C
7914C
7934C
7026C
7040C
7221C
7240C
7300C
7302C
7313C
7340C
BNT0
BNT2
HSB9C
HSB0C
HSB010CHSB032C
BNT000 BNT009
BNT200 BNT209
HSB910C HSB934C
HSB034C
QJ2
QJ3
QJ208
QJ306
Double
row
7904C7913C
7000C7024C
7200C7220C
7303C7312C
7200 7222
7300 7322
7200B7222B
7300B7322B
Machined cage
4-point
contact
High speed use
78C
79C
70C
72C
73C
79047913
70007024
Pressed cage
Ultra high
speed use
Standard
79
70
72
73
72B
73B
Molded resin cage
52
53
5200 5218
5302 5315
QJ224
QJ324
52195220
Note: 1. Standard cages for 5S-BNT and 5S-HSB type bearings are the same as cages for BNT and HSB type bearings.
2. Due to the material characteristics of molded resin cages, use at application temperatures in excess of
120 is not possible.
B-43
Single and Duplex Arrangements

2B
B
r
ra
r1
r1
ra
da
Da
Single
Tandem
arrangement
(DT)
Face-to-face
arrangement
(DF)
Back-to-back
arrangement
(DB)
d 1030mm
Boundary dimensions
Basic load ratings

dynamic
mm
static
dynamic
kN
3
Limiting speeds
static
kgf
Bearing
numbers
Load
center
rpm
Mass
mm
kg
single
(approx.)
grease
oil
212
279
257
500
470
29,000
28,000
24,000
26,000
22,000
39,000
37,000
32,000
34,000
29,000
7000
7200
7200B
7300
7300B
9
10.5
13
12
15
0.023
0.029
0.029
0.04
0.041
515
775
715
1,140
1,080
251
405
375
535
505
26,000
25,000
21,000
23,000
19,000
35,000
33,000
28,000
30,000
26,000
7001
7201
7201B
7301
7301B
10
11.5
14
13
16.5
0.025
0.035
0.036
0.044
0.045
3.15
4.70
4.35
7.20
6.65
590
925
855
1,370
1,270
320
480
445
735
680
23,000
22,000
18,000
19,000
17,000
31,000
29,000
25,000
26,000
22,000
7002
7202
7202B
7302
7302B
11.5
12.5
16
15
19
0.035
0.046
0.046
0.055
0.057
7.15
12.0
11.0
15.9
14.8
3.85
6.60
6.10
8.65
8.00
730
1,220
1,120
1,630
1,510
390
675
625
880
820
21,000
19,000
17,000
18,000
15,000
28,000
26,000
22,000
24,000
20,000
7003
7203
7203B
7303
7303B
12.5
14.5
18
16
20.5
0.046
0.064
0.066
0.107
0.109
0.3
0.6
0.6
0.6
0.6
9.70
14.5
13.3
18.7
17.3
5.60
8.40
7.70
10.4
9.65
990
1,480
1,360
1,910
1,770
570
855
785
1,060
985
19,000
17,000
15,000
16,000
13,000
25,000
23,000
20,000
21,000
18,000
7004
7204
7204B
7304
7304B
15
17
21.5
18
22.5
0.08
0.1
0.102
0.138
0.141
0.3
0.6
1
1
1.1
1.1
0.15
0.3
0.6
0.6
0.6
0.6
7.15
10.7
16.2
14.8
26.4
24.4
4.95
6.85
10.3
9.40
15.8
14.6
730
1,100
1,650
1,510
2,690
2,490
505
700
1,050
960
1,610
1,490
17,000
16,000
14,000
12,000
13,000
11,000
22,000
21,000
19,000
16,000
17,000
15,000
7905
7005
7205
7205B
7305
7305B
14
16.5
19
24
21
27
0.05
0.093
0.125
0.129
0.23
0.234
0.3
1
0.15
0.6
7.55
13.9
5.75
9.45
770
1,410
585
965
14,000
13,000
19,000
18,000
7906
7006
15.5
19
0.058
0.135
2B
rs min
rls min
Cr
10
26
30
30
35
35
8
9
9
11
11
16
18
18
22
22
0.3
0.6
0.6
0.6
0.6
0.15
0.3
0.3
0.3
0.3
4.65
5.45
5.00
10.1
9.50
2.07
2.74
2.52
4.95
4.60
470
555
510
1,030
970
12
28
32
32
37
37
8
10
10
12
12
16
20
20
24
24
0.3
0.6
0.6
1
1
0.15
0.3
0.3
0.6
0.6
5.05
7.60
7.00
11.2
10.5
2.46
3.95
3.65
5.25
4.95
15
32
35
35
42
42
9
11
11
13
13
18
22
22
26
26
0.3
0.6
0.6
1
1
0.15
0.3
0.3
0.6
0.6
5.80
9.05
8.35
13.5
12.5
17
35
40
40
47
47
10
12
12
14
14
20
24
24
28
28
0.3
0.6
0.6
1
1
0.15
0.3
0.3
0.6
0.6
20
42
47
47
52
52
12
14
14
15
15
24
28
28
30
30
0.6
1
1
1.1
1.1
25
42
47
52
52
62
62
9
12
15
15
17
17
18
24
30
30
34
34
30
47
55
9
13
18
26
Cor
Cr
Cor
1 This value achieved with machined cages; when pressed cages are used, 80% of this value is acceptable.
2 Bearing numbers appended with the code "B" have a contact angle of 40; bearings with this code have a contact angle of 30.
3 Smallest allowable dimension for chamfer dimension r or r1.
B-44
r 1a
ra
ra

dynamic
PrXFrYFa
r1a
Contact
angle
Single, DT
DB, DF
Fa / Fre Fa / Fre Fa / Fre Fa / Fre
X
Y
X
Y
X
Y
X
Y
30 0.80
40 1.14
Db
da
Da
db
1
1
0
0
0.39 0.76
0.35 0.57
1
1
0.78 0.63 1.24

0.55 0.57 0.93
static
PorXo FrYo Fa
Contact
angle
30
40
Single, DT
Xo
Yo
0.5
0.5
0.33
0.26
DB, DF
Xo
1
1
Yo
0.66
0.52
For single and DT arrangement,

Basic load ratings

dynamic
static
dynamic
static
(duplex)
(duplex)
kN
kgf
Cr
Cor
Cr
Cor
Limiting speeds
(duplex)
rpm
grease
oil
Bearing numbers
DB
DF
DT

mm
Da
da
db
Db
ras
r1as
min
min
max
max
max
max
7.50
8.80
8.10
16.5
15.4
4.15
5.45
5.05
9.85
9.20
765
900
825
1,680
1,570
425
560
515
1,000
940
23,000
22,000
19,000
20,000
18,000
31,000
30,000
26,000
27,000
24,000
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
12.5
14.5
14.5
14.5
14.5
12.5
12.5
12.5
12.5
12.5
23.5
25.5
25.5
30.5
30.5
24.8
27.5
27.5
32.5
32.5
0.3
0.6
0.6
0.6
0.6
0.15
0.3
0.3
0.3
0.3
8.20
12.3
11.4
18.2
17.1
4.90
7.95
7.35
10.5
9.90
840
1,260
1,160
1,850
1,750
500
810
750
1,070
1,010
21,000
20,000
17,000
18,000
16,000
28,000
26,000
23,000
24,000
21,000
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
14.5
16.5
16.5
17.5
17.5
14.5
14.5
14.5
16.5
16.5
25.5
27.5
27.5
31.5
31.5
26.8
29.5
29.5
32.5
32.5
0.3
0.6
0.6
1
1
0.15
0.3
0.3
0.6
0.6
9.40
14.7
13.6
21.9
20.3
6.30
9.40
8.70
14.4
13.3
960
1,500
1,390
2,230
2,070
640
960
885
1,470
1,360
18,000
17,000
15,000
15,000
13,000
24,000
23,000
20,000
21,000
18,000
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
17.5
19.5
19.5
20.5
20.5
17.5
17.5
17.5
19.5
19.5
29.5
30.5
30.5
36.5
36.5
30.8
32.5
32.5
37.5
37.5
0.3
0.6
0.6
1
1
0.15
0.3
0.3
0.6
0.6
11.6
19.4
17.9
25.9
24.0
7.65
13.2
12.2
17.3
16.0
1,190
1,980
1,830
2,640
2,450
780
1,350
1,250
1,760
1,640
17,000
15,000
13,000
14,000
12,000
22,000
21,000
18,000
19,000
16,000
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
19.5
21.5
21.5
22.5
22.5
19.5
19.5
19.5
21.5
21.5
32.5
35.5
35.5
41.5
41.5
33.8
37.5
37.5
42.5
42.5
0.3
0.6
0.6
1
1
0.15
0.3
0.3
0.6
0.6
15.8
23.6
21.6
30.5
28.2
11.2
16.8
15.4
20.8
19.3
1,610
2,400
2,200
3,100
2,870
1,140
1,710
1,570
2,130
1,970
15,000
14,000
12,000
12,000
11,000
20,000
18,000
16,000
17,000
14,000
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
24.5
25.5
25.5
27
27
24.5
24.5
24.5
24.5
24.5
37.5
41.5
41.5
45
45
39.5
42.5
42.5
47.5
47.5
0.6
1
1
1
1
0.3
0.6
0.6
0.6
0.6
11.6
17.5
26.3
24.0
43.0
39.5
9.95
13.7
20.6
18.8
31.5
29.3
1,180
1,780
2,690
2,450
4,400
4,050
1,010
1,400
2,100
1,920
3,250
2,980
13,000
12,000
11,000
10,000
10,000
9,100
18,000
17,000
15,000
13,000
14,000
12,000
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
27.5
29.5
30.5
30.5
32
32
27.5
29.5
29.5
29.5
29.5
29.5
39.5
42.5
46.5
46.5
55
55
40.8
44.5
47.5
47.5
57.5
57.5
0.3
0.6
1
1
1
1
0.15
0.3
0.6
0.6
0.6
0.6
12.3
22.5
11.5
18.9
1,250
2,300
1,170
1,930
12,000
11,000
15,000
14,000
DB
DB
DF
DF
DT
DT
32.5
35.5
32.5
35.5
44.5
49.5
45.8
50.5
0.3
1
0.15
0.6
Note: For bearing series 79 and 70, inner rings are constructed with groove abutments on both sides. Therefore, the inner ring chamfer dimension r1 is identical to dimension r.
Furthermore, the radius r1a of the shaft corner roundness is likewise identical to ra.
B-45

2B
B
r
ra
r1
r1
ra
da
Da
Single
Tandem
arrangement
(DT)
Face-to-face
arrangement
(DF)
Back-to-back
arrangement
(DB)
d 3055mm
Boundary dimensions
Basic load ratings

dynamic
mm
static
dynamic
kN
3
Limiting speeds
static
kgf
Bearing
numbers
rpm
Load
center
Mass
mm
kg
single
(approx.)
grease
oil
1,510
1,380
2,280
2,090
12,000
11,000
11,000
9,600
16,000
14,000
15,000
13,000
7206
7206B
7306
7306B
21.5
27.5
24.5
31.5
0.193
0.197
0.345
0.352
1,220
1,790
3,050
2,760
4,050
3,750
905
1,280
2,050
1,870
2,680
2,470
13,000
12,000
11,000
9,300
9,800
8,400
17,000
16,000
14,000
12,000
13,000
11,000
7907
7007
7207
7207B
7307
7307B
18
21
24
31
27
34.5
0.088
0.18
0.281
0.287
0.462
0.469
10.2
14.6
25.1
23.0
33.0
30.5
1,290
1,910
3,600
3,250
5,000
4,550
1,040
1,490
2,560
2,340
3,350
3,100
11,000
10,000
9,600
8,300
8,600
7,400
15,000
14,000
13,000
11,000
12,000
9,900
7908
7008
7208
7208B
7308
7308B
20.5
23
26.5
34
30.5
39
0.13
0.222
0.355
0.375
0.625
0.636
15.7
22.3
39.5
36.0
63.5
58.5
12.9
17.7
28.7
26.2
44.0
40.0
1,600
2,270
4,050
3,650
6,450
5,950
1,310
1,800
2,930
2,680
4,500
4,100
10,000
9,500
8,700
7,400
7,800
6,600
14,000
13,000
12,000
9,900
10,000
8,900
7909
7009
7209
7209B
7309
7309B
22.5
25.5
28.5
37
33.5
43.0
0.15
0.282
0.404
0.41
0.837
0.854
0.3
0.6
0.6
0.6
1
1
16.6
23.7
41.5
37.5
74.0
68.0
14.5
20.1
31.5
28.6
52.0
48.0
1,690
2,410
4,200
3,800
7,600
6,950
1,470
2,050
3,200
2,920
5,350
4,950
9,200
8,600
7,900
6,700
7,100
6,000
12,000
11,000
10,000
9,000
9,400
8,100
7910
7010
7210
7210B
7310
7310B
23.5
27
30
39.5
36.5
47
0.157
0.306
0.457
0.466
1.09
1.11
0.6
0.6
1
1
1
1
17.3
31.0
51.0
46.5
86.0
79.0
16.1
26.3
39.5
36.0
61.5
56.5
1,770
3,150
5,200
4,700
8,750
8,050
1,640
2,680
4,050
3,700
6,300
5,800
8,400
7,900
7,100
6,100
6,400
5,500
11,000
11,000
9,500
8,200
8,600
7,300
7911
7011
7211
7211B
7311
7311B
26
30
33
43
40
52
0.214
0.447
0.6
0.612
1.39
1.42
2B
rs min
rls min
Cr
Cor
30
62
62
72
72
16
16
19
19
32
32
38
38
1
1
1.1
1.1
0.6
0.6
0.6
0.6
22.5
20.5
33.5
31.0
14.8
13.5
22.3
20.5
2,300
2,090
3,450
3,150
35
55
62
72
72
80
80
10
14
17
17
21
21
20
28
34
34
42
42
0.6
1
1.1
1.1
1.5
1.5
0.3
0.6
0.6
0.6
1
1
12.0
17.5
29.7
27.1
40.0
36.5
8.85
12.6
20.1
18.4
26.3
24.2
40
62
68
80
80
90
90
12
15
18
18
23
23
24
30
36
36
46
46
0.6
1
1.1
1.1
1.5
1.5
0.3
0.6
0.6
0.6
1
1
12.7
18.8
35.5
32.0
49.0
45.0
45
68
75
85
85
100
100
12
16
19
19
25
25
24
32
38
38
50
50
0.6
1
1.1
1.1
1.5
1.5
0.3
0.6
0.6
0.6
1
1
50
72
80
90
90
110
110
12
16
20
20
27
27
24
32
40
40
54
54
0.6
1
1.1
1.1
2
2
55
80
90
100
100
120
120
13
18
21
21
29
29
26
36
42
42
58
58
1
1.1
1.5
1.5
2
2
Cr
Cor
3 Minimal allowable dimension for chamfer dimension r or r1.
B-46
r 1a
ra
ra

dynamic
PrXFrYFa
r1a
Contact
angle
Single, DT
DB, DF
X
Y
X
Y
X
Y
X
Y
30 0.80
40 1.14
Db
da
Da
db
1
1
0
0
0.39 0.76
0.35 0.57
1
1
0.78 0.63 1.24

0.55 0.57 0.93
static
PorXo FrYo Fa
Contact
angle
30
40
Single, DT
Xo
Yo
0.5
0.5
0.33
0.26
DB, DF
Xo
Yo
0.66
0.52
1
1

Basic load ratings

dynamic
static
dynamic
static
(duplex)
(duplex)
kN
kgf
Cr
Cor
Cr
Cor
Limiting speeds
(duplex)
rpm
grease
oil
Bearing numbers
DB
DF
DT

mm
Da
da
db
Db
ras
r1as
min
min
max
max
max
max
36.5
33.5
54.5
50.0
29.6
27.1
44.5
41.0
3,750
3,400
5,550
5,100
3,000
2,760
4,550
4,200
9,800
8,600
8,900
7,700
13,000
11,000
12,000
10,000
DB
DB
DB
DB
DF
DF
DF
DF
DT
DT
DT
DT
35.5
35.5
37
37
34.5
34.5
34.5
34.5
56.5
56.5
65
65
57.5
57.5
67.5
67.5
1
1
1
1
0.6
0.6
0.6
0.6
19.5
28.5
48.5
44.0
65.0
59.5
17.7
25.1
40.0
36.5
52.5
48.5
1,990
2,900
4,900
4,500
6,600
6,100
1,810
2,560
4,100
3,750
5,350
4,950
10,000
9,400
8,600
7,500
7,800
6,800
13,000
13,000
11,000
10,000
10,000
9,000
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
39.5
40.5
42
42
43.5
43.5
39.5
40.5
39.5
39.5
40.5
40.5
50.5
56.5
65
65
71.5
71.5
52.5
57.5
67.5
67.5
74.5
74.5
0.6
1
1
1
1.5
1.5
0.3
0.6
0.6
0.6
1
1
20.6
30.5
57.5
52.0
79.5
73.0
20.4
29.2
50.5
46.0
66.0
60.5
2,100
3,100
5,850
5,300
8,100
7,400
2,080
2,970
5,150
4,700
6,700
6,200
9,000
8,300
7,700
6,700
6,900
6,000
12,000
11,000
10,000
8,900
9,200
8,000
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
44.5
45.5
47
47
48.5
48.5
44.5
45.5
44.5
44.5
45.5
45.5
57.5
62.5
73.0
73
81.5
81.5
59.5
63.5
75.5
75.5
84.5
84.5
0.6
1
1
1
1.5
1.5
0.3
0.6
0.6
0.6
1
1
25.5
36.0
64.5
58.5
103
95.0
25.7
35.5
57.5
52.5
88.0
80.5
2,600
3,700
6,550
5,950
10,500
9,650
2,620
3,600
5,850
5,350
8,950
8,250
8,100
7,500
6,900
6,000
6,200
5,400
11,000
10,000
9,200
8,000
8,200
7,200
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
49.5
50.5
52
52
53.5
53.5
49.5
50.5
49.5
49.5
50.5
50.5
63.5
69.5
78
78
91.5
91.5
65.5
70.5
80.5
80.5
94.5
94.5
0.6
1
1
1
1.5
1.5
0.3
0.6
0.6
0.6
1
1
27.0
38.5
67.0
60.5
121
111
28.9
40.0
63.0
57.0
105
96.0
2,750
3,900
6,850
6,200
12,300
11,300
2,950
4,100
6,400
5,850
10,700
9,850
7,300
6,800
6,300
5,500
5,600
4,900
9,800
9,100
8,300
7,300
7,500
6,500
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
54.5
55.5
57
57
60
60
54.5
67.5 69.5
55.5
74.5 75.5
54.5
83
85.5
54.5
83
85.5
55.5 100
104.5
55.5 100
104.5
0.6
1
1
1
2
2
0.3
0.6
0.6
0.6
1
1
28.1
50.5
83.0
75.0
139
128
32.0
52.5
79.0
72.0
123
113
2,870
5,150
8,450
7,650
14,200
13,000
3,300
5,350
8,050
7,350
12,600
11,600
6,700
6,300
5,700
5,000
5,100
4,500
8,900
8,400
7,600
6,600
6,800
5,900
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
60.5
62
63.5
63.5
65
65
60.5
74.5 75.5
62
83
85.5
60.5
91.5 94.5
60.5
91.5 94.5
60.5 110
114.5
60.5 110
114.5
1
1
1.5
1.5
2
2
0.6
0.6
1
1
1
1
Furthermore, the radius r1a of the shaft corner roundness is, likewise, identical to ra.
B-47
d 6085mm
Boundary dimensions
Basic load ratings

dynamic
mm
d
static
dynamic
kN
3
Limiting speeds
static
kgf
Bearing
numbers
rpm
Load
center
Mass
mm
kg
single
(approx.)
grease
oil
1,780
2,860
5,000
4,550
7,300
6,700
7,800
7,200
6,600
5,700
5,900
5,100
10,000
9,600
8,800
7,600
7,900
6,800
7912
7012
7212
7212B
7312
7312B
27.5
31.5
36
47.5
43
56
0.23
0.478
0.765
0.78
1.74
1.77
1,860
3,450
7,150
6,500
11,300
10,400
1,840
3,200
5,900
5,350
8,350
7,700
7,200
6,700
6,100
5,200
5,500
4,700
9,600
9,000
8,100
7,000
7,300
6,300
7913
7013
7213
7213B
7313
7313B
29
33
38
50.5
46
59.5
0.245
0.509
0.962
0.981
2.11
2.15
2,670
4,350
7,800
7,050
12,700
11,700
2,670
4,000
6,500
5,900
9,550
8,800
6,700
6,200
5,700
4,900
5,100
4,400
9,000
8,300
7,600
6,500
6,800
5,800
7914
7014
7214
7214B
7314
7314B
32.5
36
40
53
49.5
63.5
0.397
0.705
1.09
1.11
2.56
2.61
26.50 27.1
43.50 41.5
79.0
68.5
71.5
62.0
136
106
125.
97.5
2,710 2,760
4,450 4,250
8,050 7,000
7,300 6,350
13,800 10,800
12,700 9,900
6,300
5,800
5,300
4,500
4,800
4,100
8,400
7,800
7,100
6,000
6,300
5,400
7915
7015
7215
7215B
7315
7315B
34
37.5
42.5
56
52.5
68
0.42
0.745
1.17
1.19
3.07
3.13
0.6
0.6
1
1
1.1
1.1
26.9
53.5
89.0
80.5
147
135
28.0
50.5
76.0
69.5
119
109
2,740 2,860
5,450 5,150
9,100 7,750
8,200 7,050
15,000 12,100
13,800 11,100
5,900
5,500
5,000
4,300
4,500
3,800
7,800
7,300
6,600
5,700
5,900
5,100
7916
7016
7216
7216B
7316
7316B
35.5
40.5
45
59
55.5
72
0.444
0.994
1.39
1.42
3.65
3.72
0.6
0.6
1
1
36.0
54.5
99.5
90.0
38.0
53.5
88.5
80.5
3,700
5,600
10,100
9,150
5,500
5,100
4,700
4,000
7,400
6,900
6,200
5,300
7917
7017
7217
7217B
38.5
42
48
63.5
0.628
1.04
1.78
1.82
2B
rs min
rls min
Cr
Cor
Cr
60
85
95
110
110
130
130
13
18
22
22
31
31
26
36
44
44
62
62
1
1.1
1.5
1.5
2.1
2.1
0.6
0.6
1
1
1.1
1.1
18.1
32.0
61.5
56.0
98.0
90.0
17.4
28.1
49.0
44.5
71.5
66.0
1,840
3,250
6,300
5,700
10,000
9,200
65
90
100
120
120
140
140
13
18
23
23
33
33
26
36
46
46
66
66
1
1.1
1.5
1.5
2.1
2.1
0.6
0.6
1
1
1.1
1.1
18.3
33.5
70.5
63.5
111
102
18.0
31.5
58.0
52.5
82.0
75.0
70
100
110
125
125
150
150
16
20
24
24
35
35
32
40
48
48
70
70
1
1.1
1.5
1.5
2.1
2.1
0.6
0.6
1
1
1.1
1.1
26.2
42.5
76.5
69.0
125
114
26.2
39.5
63.5
58.0
93.5
86
75
105
115
130
130
160
160
16
20
25
25
37
37
32
40
50
50
74
74
1
1.1
1.5
1.5
2.1
2.1
0.6
0.6
1
1
1.1
1.1
80
110
125
140
140
170
170
16
22
26
26
39
39
32
44
52
52
78
78
1
1.1
2
2
2.1
2.1
85
120
130
150
150
18
22
28
28
36
44
56
56
1.1
1.1
2
2
Cor
3,850
5,450
9,050
8,200
B-48
r 1a
ra
ra

dynamic
PrXFrYFa
r1a
Contact
angle
Single, DT
DB, DF
X
Y
X
Y
X
Y
X
Y
30 0.80
40 1.14
Db
da
Da
db
1
1
0
0
0.39 0.76
0.35 0.57
1
1
0.78 0.63 1.24

0.55 0.57 0.93
static
PorXo FrYo Fa
Contact
angle
30
40
Single, DT
Xo
Yo
0.5
0.5
0.33
0.26
DB, DF
Xo
Yo
0.66
0.52
1
1

Basic load ratings

dynamic
static
dynamic
static
(duplex)
(duplex)
kN
kgf
Cr
Cor
Cr
Cor
Limiting speeds
(duplex)
rpm
grease
oil
Bearing numbers
DB
DF
DT
da
db
min
min
mm
Da
max
Db
ras
r1as
max
max
max
29.3
52.0
100
91.0
159
146
35.0
56.0
98.0
89.0
143
132
2,990
5,300
10,200
9,250
16,200
14,900
3,550
5,700
10,000
9,100
14,600
13,400
6,200
5,800
5,300
4,600
4,700
4,100
8,300
7,700
7,000
6,100
6,300
5,500
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
65.5
67
68.5
68.5
72
72
65.5
67
65.5
65.5
67
67
79.5
88
101.5
101.5
118
118
80.5
90.5
104.5
104.5
123
123
1
1
1.5
1.5
2
2
0.6
0.6
1
1
1
1
29.7
55.0
114
103
180
166
36.0
62.5
116
105
164
151
3,050
5,600
11,600
10,500
18,400
16,900
3,700
6,400
11,800
10,700
16,700
15,400
5,700
5,400
4,900
4,200
4,400
3,800
7,600
7,100
6,500
5,600
5,800
5,100
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
70.5
72
73.5
73.5
77
77
70.5
72
70.5
70.5
72
72
84.5
93
111.5
111.5
128
128
85.5
95.5
114.5
114.5
133
133
1
1
1.5
1.5
2
2
0.6
0.6
1
1
1
1
42.5
69.5
124
112
203
186
52.5
78.5
127
116
187
172
4,350
7,050
12,600
11,500
20,700
19,000
5,350
8,050
13,000
11,800
19,100
17,600
5,300
5,000
4,500
3,900
4,100
3,500
7,100
6,600
6,000
5,200
5,400
4,700
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
75.5
77
78.5
78.5
82
82
75.5
77
75.5
75.5
77
77
94.5
103
116.5
116.5
138
138
95.5
105.5
119.5
119.5
143
143
1
1
1.5
1.5
2
2
0.6
0.6
1
1
1
1
43.0
71.0
128
116
221
202
54.0
83.5
137
124
212
195
4,400
7,250
13,100
11,800
22,500
20,600
5,500
8,500
14,000
12,700
21,600
19,800
5,000
4,600
4,200
3,700
3,800
3,300
6,700
6,200
5,600
4,900
5,000
4,400
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
80.5
82
83.5
83.5
87
87
80.5
82
80.5
80.5
82
82
99.5
108
121.5
121.5
148
148
100.5
110.5
124.5
124.5
153
153
1
1
1.5
1.5
2
2
0.6
0.6
1
1
1
1
43.5
86.5
145
131
239
219
56.0
101
152
139
238
218
4,450
8,850
14,700
13,300
24,400
22,300
5,700
10,300
15,500
14,100
24,200
22,300
4,700
4,400
3,900
3,400
3,500
3,100
6,200
5,800
5,300
4,600
4,700
4,100
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
85.5
87
90
90
92
92
85.5
87
85.5
85.5
87
87
104.5
118
130
130
158
158
105.5
120.5
134.5
134.5
163
163
1
1
2
2
2
2
0.6
0.6
1
1
1
1
59.0
89.0
162
146
76.0
107
177
161
6,000
9,050
16,500
14,900
7,750
10,900
18,100
16,400
4,400
4,100
3,700
3,200
5,900
5,500
5,000
4,300
DB
DB
DB
DB
DF
DF
DF
DF
DT
DT
DT
DT
92
92
95
95
92
92
90.5
90.5
113
123
140
140
115.5
125.5
144.5
144.5
1
1
2
2
0.6
0.6
1
1
B-49

2B
B
r
ra
r1
r1
ra
da
Da
Single
Tandem
arrangement
(DT)
Face-to-face
arrangement
(DF)
Back-to-back
arrangement
(DB)
d 85120mm
Boundary dimensions
Basic load ratings

dynamic
mm
d
static
dynamic
kN
3
Limiting speeds
static
kgf
Bearing
numbers
rpm
grease
oil
Load
center
Mass
mm
kg
single
(approx.)
2B
rs min
rls min
85
180
180
41
41
82
82
3
3
1.1
1.1
159
146
133
122
16,200 13,500
14,800 12,400
4,200
3,600
5,600
4,800
7317
7317B
59
76
4.34
4.43
90
125
140
160
160
190
190
18
24
30
30
43
43
36
48
60
60
86
86
1.1
1.5
2.0
2.0
3.0
3.0
0.6
1
1
1
1.1
1.1
36.0
65.0
118
107
171
156
38.0
63.5
103
94.0
147
135
3,650 3,850
6,650 6,450
12,000 10,500
10,900 9,550
17,400 15,000
15,900 13,800
5,200
4,900
4,400
3,800
4,000
3,400
7,000
6,500
5,900
5,000
5,300
4,500
7918
7018
7218
7218B
7318
7318B
40
45
51
67.5
62
80.5
0.658
1.35
2.18
2.22
5.06
5.16
95
130
145
170
170
200
200
18
24
32
32
45
45
36
48
64
64
90
90
1.1
1.5
2.1
2.1
3
3
0.6
1
1.1
1.1
1.1
1.1
37.0
67.0
133
121
183
167
40.5
67.0
118
107
162
149
3,800
6,800
13,600
12,300
18,600
17,100
4,150
6,800
12,000
11,000
16,600
15,200
5,000
4,600
4,100
3,500
3,700
3,200
6,600
6,100
5,500
4,700
5,000
4,200
7919
7019
7219
7219B
7319
7319B
41.5
46.5
54.5
71.5
65
84.5
0.688
1.41
2.67
2.72
5.89
6
100
140
150
180
180
215
215
20
24
34
34
47
47
40
48
68
68
94
94
1.1
1.5
2.1
2.1
3
3
0.6
1
1.1
1.1
1.1
1.1
48.0
68.5
144
130
207
190
52.5
70.5
126
114
193
178
4,900
6,950
14,700
13,300
21,100
19,400
5,350
7,200
12,800
11,700
19,700
18,100
4,700
4,400
3,900
3,400
3,500
3,000
6,200
5,800
5,200
4,500
4,700
4,000
7920
7020
7220
7220B
7320
7320B
44.5
48
57.5
76
69
89.5
0.934
1.47
3.2
3.26
7.18
7.32
105
145
160
190
190
225
225
20
26
36
36
49
49
40
52
72
72
98
98
1.1
2
2.1
2.1
3
3
0.6
1
1.1
1.1
1.1
1.1
48.5
80.0
157
142
220
202
54.5
81.5
142
129
210
194
4,950
8,150
16,000
14,500
22,400
20,600
5,550
8,350
14,400
13,100
21,500
19,700
4,400
4,100
3,700
3,200
3,400
2,900
5,900
5,500
5,000
4,300
4,500
3,800
7921
7021
7221
7221B
7321
7321B
46
51.5
60.5
80
72
93.5
0.972
1.86
3.79
3.87
8.2
8.36
110
150
170
200
200
240
240
20
28
38
38
50
50
40
56
76
76
100
100
1.1
2
2.1
2.1
3
3
0.6
1
1.1
1.1
1.1
1.1
49.5
92.0
170
154
246
226
56.0
93.0
158
144
246
226
5,050
9,350
17,300
15,700
25,100
23,000
5,700
9,450
16,100
14,700
25,100
23,100
4,200
3,900
3,500
3,000
3,200
2,700
5,700
5,300
4,700
4,000
4,300
3,700
7922
7022
7222
7222B
7322
7322B
47.5
54.5
64
84
76
99
1.01
2.3
4.45
4.54
9.6
9.8
165
22
44
1.1
0.6
61.0
69.5
6,200
7,100
3,900
5,200
7924
52
1.66
120
Cr
Cor
Cr
Cor
B-50
r 1a
ra
ra

dynamic
PrXFrYFa
r1a
Contact
angle
Single, DT
DB, DF
X
Y
X
Y
X
Y
X
Y
30 0.80
40 1.14
Db
da
Da
db
1
1
0
0
0.39 0.76
0.35 0.57
1
1
0.78 0.63 1.24

0.55 0.57 0.93
static
PorXo FrYo Fa
Contact
angle
30
40
Single, DT
Xo
Yo
0.5
0.5
0.33
0.26
DB, DF
Xo
Yo
0.66
0.52
1
1

Basic load ratings

dynamic
static
dynamic
static
(duplex)
(duplex)
kN
kgf
Cr
Cor
Cr
Cor
Limiting speeds
(duplex)
rpm
grease
oil
Bearing numbers
DB
DF
DT
da
db
min
min
258
236
265
244
26,300
24,100
27,000
24,900
3,300
2,900
4,500
3,900
DB
DB
DF
DF
DT
DT
99
99
58.0
106
191
173
277
254
75.5
127
206
188
294
270
5,900
10,800
19,500
17,700
28,300
25,900
7,700
12,900
21,000
19,100
30,000
27,600
4,200
3,900
3,500
3,100
3,200
2,700
5,500
5,200
4,700
4,100
4,200
3,700
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
60.5
109
217
196
297
272
81.5
134
236
215
325
298
6,150
11,100
22,100
20,000
30,500
27,700
8,300
13,600
24,100
21,900
33,000
30,500
3,900
3,700
3,300
2,900
3,000
2,600
5,300
4,900
4,400
3,800
3,900
3,400
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
78.0
111
233
212
335
310
105
141
251
229
385
355
7,950
11,300
23,800
21,600
34,500
31,500
10,700
14,400
25,600
23,300
39,500
36,000
3,700
3,500
3,100
2,700
2,800
2,400
5,000
4,600
4,200
3,600
3,700
3,300
DB
DB
DB
DB
DB
DB
79.0
130
254
231
355
330
109
163
283
258
420
385
8,050
13,300
25,900
23,500
36,500
33,500
11,100
16,700
28,900
26,300
43,000
39,500
3,500
3,300
3,000
2,600
2,700
2,300
4,700
4,400
4,000
3,500
3,600
3,100
80.0
149
276
250
400
365
112
186
315
289
490
455
8,150
15,200
28,100
25,500
41,000
37,500
11,400
18,900
32,500
29,400
50,000
46,000
3,400
3,100
2,800
2,500
2,600
2,200
99.0
139
10,100
14,200
3,100
mm
Da
max
Db
ras
r1as
max
max
max
92
92
166
166
173
173
2.5
2.5
1
1
97
98.5
100
100
104
104
97
98.5
95.5
95.5
97
97
118
131.5
150
150
176
176
120.5
134.5
154.5
154.5
183
183
1
1.5
2
2
2.5
2.5
0.6
1
1
1
1
1
DT
DT
DT
DT
DT
DT
102
103.5
107
107
109
109
102
103.5
102
102
102
102
123
136.5
158
158
186
186
125.5
139.5
163
163
193
193
1
1.5
2
2
2.5
2.5
0.6
1
1
1
1
1
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
107
108.5
112
112
114
114
107
108.5
107
107
107
107
133
141.5
168
168
201
201
135.5
144.5
173
173
208
208
1
1.5
2
2
2.5
2.5
0.6
1
1
1
1
1
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
112
115
117
117
119
119
112
115
112
112
112
112
138
150
178
178
211
211
140.5
154.5
183
183
218
218
1
2
2
2
2.5
2.5
0.6
1
1
1
1
1
4,500
4,200
3,800
3,300
3,400
3,000
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
117
120
122
122
124
124
117
120
117
117
117
117
143
160
188
188
226
226
145.5
164.5
193
193
233
233
1
2
2
2
2.5
2.5
0.6
1
1
1
1
1
4,100
DB
DF
DT
127
127
158
160.5
0.6
B-51

2B
B
r
ra
r1
ra
Face-to-face
arrangement
(DF)
Back-to-back
arrangement
(DB)
Single
da
Da
Tandem
arrangement
(DT)
d 120170mm
Boundary dimensions
Basic load ratings

dynamic
mm
d
static
dynamic
kN
2
Limiting speeds
static
kgf
Bearing
numbers
Load
center
rpm
mm
kg
single
(approx.)
Cr
Cor
grease
98.5
177
162
252
231
9,550
18,600
16,900
25,100
23,000
10,000
18,100
16,500
25,700
23,600
3,600
3,200
2,800
2,900
2,500
4,800
4,300
3,700
3,900
3,300
7024
7224
7224B
7324
7324B
57.5
68.5
90.5
82.5
107
2.47
6.26
6.26
14.7
14.7
75.0
117
196
177
273
250
87.5
125
198
180
293
268
7,650
12,000
20,000
18,100
27,900
25,500
8,900
12,800
20,200
18,300
29,800
27,400
3,600
3,300
3,000
2,500
2,700
2,300
4,700
4,400
4,000
3,400
3,600
3,100
7926
7026
7226
7226B
7326
7326B
56.5
64
72
95.5
88
115
1.82
3.73
7.15
7.15
17.6
17.6
1
1
1.1
1.1
1.5
1.5
75.5
120
203
183
300
275
90.0
133
215
195
335
310
7,700
12,200
20,700
18,700
30,500
28,100
9,150
13,500
21,900
19,900
34,500
31,500
3,300
3,100
2,700
2,300
2,500
2,100
4,400
4,100
3,600
3,100
3,300
2,800
7928
7028
7228
7228B
7328
7328B
59.5
67
77.5
103
94.5
123
1.94
3.96
8.78
8.78
21.5
21.5
2
2.1
3
3
4
4
1
1.1
1.1
1.1
1.5
1.5
97.5
137
232
210
330
300
117
154
259
235
380
350
9,900
14,000
23,700
21,400
33,500
30,500
11,900
15,700
26,400
24,000
39,000
36,000
3,100
2,800
2,500
2,200
2,300
2,000
4,100
3,800
3,400
2,900
3,100
2,600
7930
7030
7230
7230B
7330
7330B
66
71.5
83
111
100
131
2.96
4.82
11
11
25.1
25.1
56
76
96
96
136
136
2
2.1
3
3
4
4
1
1.1
1.1
1.1
1.5
1.5
98.5
155
263
238
345
315
121
176
305
279
420
385
10,000
15,800
26,800
24,200
35,500
32,000
12,300
18,000
31,500
28,400
43,000
39,500
2,800
2,700
2,400
2,000
2,100
1,800
3,800
3,600
3,200
2,700
2,800
2,400
7932
7032
7232
7232B
7332
7332B
69
77
89
118
106
139
3.13
5.96
13.7
13.7
29.8
29.8
56
84
104
104
144
2
2.1
4
4
4
1
1.1
1.5
1.5
1.5
102
186
295
266
390
129
214
360
325
485
10,400
18,900
30,000
27,200
39,500
13,100
21,900
36,500
33,000
49,500
2,700
2,500
2,200
1,900
2,000
3,600
3,300
3,000
2,500
2,700
7934
7034
7234
7234B
7334
71.5
83
95.5
127
113
3.29
7.96
17
17
35.3
2B
rs min
rls min
120
180
215
215
260
260
28
40
40
55
55
56
80
80
110
110
2
2.1
2.1
3
3
1
1.1
1.1
1.1
1.1
93.5
183
165
246
225
130
180
200
230
230
280
280
24
33
40
40
58
58
48
66
80
80
116
116
1.5
2
3
3
4
4
1
1
1.1
1.1
1.5
1.5
140
190
210
250
250
300
300
24
33
42
42
62
62
48
66
84
84
124
124
1.5
2
3
3
4
4
150
210
225
270
270
320
320
28
35
45
45
65
65
56
70
90
90
130
130
160
220
240
290
290
340
340
28
38
48
48
68
68
170
230
260
310
310
360
28
42
52
52
72
Cr
Cor
oil
Mass
B-52
r 1a
ra

dynamic
PrXFrYFa
ra
r1a
Contact
angle
Db
da
Da
Single, DT
DB, DF
X
Y
X
Y
X
Y
X
Y
30 0.80
40 1.14
da
1
1
0
0
0.39 0.76
0.35 0.57
1
1
0.78 0.63 1.24

0.55 0.57 0.93
static
PorXo FrYo Fa
Contact
angle
30
40
Single, DT
Xo
Yo
0.5
0.5
0.33
0.26
DB, DF
Xo
Yo
0.66
0.52
1
1

Basic load ratings

dynamic
static
dynamic
static
(duplex)
(duplex)
kN
kgf
Cr
Cor
Cr
Cor
Limiting speeds
(duplex)
rpm
grease
oil
Bearing numbers
DB
DF
DT
da
Da
mm
Db
ras
r1as
min
max
max
max
max
152
297
269
400
365
197
355
325
505
460
15,500
30,500
27,400
41,000
37,500
20,100
36,000
33,000
51,500
47,000
2,900
2,600
2,300
2,300
2,000
3,800
3,400
3,000
3,100
2,700
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
130
132
132
134
134
170
203
203
246
246
174.5
208
208
253
253
2
2
2
2.5
2.5
1
1
1
1
1
121
191
320
288
445
405
175
251
395
360
585
535
12,400
19,400
32,500
29,400
45,500
41,500
17,800
25,600
40,500
36,500
59,500
54,500
2,800
2,600
2,400
2,100
2,100
1,900
3,800
3,500
3,100
2,700
2,800
2,500
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
138.5
140
144
144
148
148
171.5
190
216
216
262
262
174.5
194.5
223
223
271.5
271.5
1.5
2
2.5
2.5
3
3
1
1
1
1
1.5
1.5
123
194
330
297
490
445
180
265
430
390
670
615
12,500
19,800
33,500
30,500
50,000
45,500
18,300
27,000
44,000
40,000
68,500
63,000
2,600
2,400
2,200
1,900
2,000
1,700
3,500
3,300
2,900
2,500
2,600
2,300
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
148.5
150
154
154
158
158
181.5
200
236
236
282
282
184.5
204.5
243
243
291.5
291.5
1.5
2
2.5
2.5
3
3
1
1
1
1
1.5
1.5
158
222
375
340
535
490
234
305
515
470
765
700
16,100
22,700
38,500
34,500
54,500
50,000
23,900
31,500
53,000
48,000
78,000
71,500
2,400
2,300
2,000
1,800
1,800
1,600
3,300
3,000
2,700
2,400
2,400
2,100
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
160
162
164
164
168
168
200
213
256
256
302
302
204.5
218
263
263
311.5
311.5
2
2
2.5
2.5
3
3
1
1
1
1
1.5
1.5
160
252
425
385
565
515
241
355
615
555
845
770
16,300
25,700
43,500
39,500
57,500
52,500
24,600
36,000
62,500
57,000
86,000
79,000
2,300
2,100
1,900
1,600
1,700
1,500
3,000
2,800
2,500
2,200
2,300
2,000
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
170
172
174
174
178
178
210
228
276
276
322
322
214.5
233
283
283
331.5
331.5
2
2
2.5
2.5
3
3
1
1
1
1
1.5
1.5
165
300
480
435
630
257
430
715
650
970
16,900
31,000
49,000
44,000
64,500
26,200
43,500
73,000
66,500
99,000
2,100
2,000
1,800
1,500
1,600
2,800
2,600
2,400
2,100
2,100
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
180
182
188
188
188
220
248
292
292
342
224.5
253
301.5
301.5
351.5
2
2
3
3
3
1
1
1.5
1.5
1.5
B-53

2B
B
r
ra
r1
ra
Face-to-face
arrangement
(DF)
Back-to-back
arrangement
(DB)
Single
da
Da
Tandem
arrangement
(DT)
d 170300mm
Boundary dimensions
Basic load ratings

dynamic
mm
d
2B
170
360
72
180
250
280
320
320
380
380
static
dynamic
kN
2
Cr
Limiting speeds
static
kgf
Cor
Cr
Bearing
numbers
Load
center
rpm
Cor
grease
oil
Mass
mm
kg
single
(approx.)
rs min
rls min
144
1.5
355
445
36,000 45,500
1,700
2,300
7334B
147
35.3
33
46
52
52
75
75
66
92
104
104
150
150
2
2.1
4
4
4
4
1
1.1
1.5
1.5
1.5
1.5
131
219
305
276
410
375
163
266
385
350
535
490
13,400
22,300
31,000
28,100
41,500
38,000
16,600
27,100
39,000
35,500
54,500
50,000
2,500
2,300
2,100
1,800
1,900
1,600
3,300
3,100
2,800
2,400
2,500
2,100
7936
7036
7236
7236B
7336
7336B
78.5
89.5
98
131
118
155
4.87
10.4
17.7
17.7
40.9
40.9
190
260
290
340
340
400
400
33
46
55
55
78
78
66
92
110
110
156
156
2
2.1
4
4
5
5
1
1.1
1.5
1.5
2
2
133
224
305
273
430
390
169
280
390
355
585
535
13,500
22,800
31,000
27,800
44,000
40,000
17,200
28,600
39,500
36,000
59,500
54,500
2,400
2,200
2,000
1,700
1,800
1,500
3,200
2,900
2,600
2,200
2,300
2,000
7938
7038
7238
7238B
7338
7338B
81.5
92.5
104
139
124
163
5.1
10.8
21.3
21.3
47
47
200
280
310
360
360
420
420
38
51
58
58
80
80
76
102
116
116
160
160
2.1
2.1
4
4
5
5
1.1
1.1
1.5
1.5
2
2
185
252
335
305
450
410
231
325
450
410
605
555
18,900
25,700
34,500
31,000
46,000
42,000
23,600
33,000
46,000
41,500
62,000
56,500
2,200
2,100
1,900
1,600
1,700
1,400
3,000
2,800
2,500
2,100
2,200
1,900
7940
7040
7240
7240B
7340
7340B
88.5
99
110
146
130
170
7.15
14
25.3
25.3
53.1
53.1
220
300
38
76
2.1
1.1
187
239
19,000 24,300
2,000
2,700
7944
94
7.74
240
320
38
76
2.1
1.1
197
264
20,100 26,900
1,800
2,400
7948
100
8.34
260
360
46
92
2.1
1.1
258
375
26,300 38,000
1,700
2,200
7952
112
14
280
380
46
92
2.1
1.1
261
385
26,600 39,500
1,500
2,100
7956
118
14.8
300
420
56
112
1.1
325
520
33,500 53,000
1,400
1,900
7960
132
23.7
B-54
r 1a
ra

dynamic
PrXFrYFa
ra
r1a
Contact
angle
Db
da
Da
Single, DT
DB, DF
X
Y
X
Y
X
Y
X
Y
30 0.80
40 1.14
da
1
1
0
0
0.39 0.76
0.35 0.57
1
1
0.78 0.63 1.24

0.55 0.57 0.93
static
PorXo FrYo Fa
Contact
angle
30
40
Single, DT
Xo
Yo
0.5
0.5
0.33
0.26
DB, DF
Xo
Yo
0.66
0.52
1
1

Basic load ratings

dynamic
static
dynamic
static
(duplex)
(duplex)
kN
kgf
Cr
Cor
Cr
Cor
59,000
Limiting speeds
(duplex)
rpm
Bearing numbers
DB
DF
DT
da
Da
mm
Db
ras
r1as
min
max
max
max
max
grease
oil
90,500
1,400
1,800
DB
DF
DT
188
342
351.5
1.5
575
890
213
355
495
450
665
605
325
530
770
700
1 070
975
21,700 33,500
36,500 54,000
50,500 78,500
45,500 71,000
68,000 109,000
62,000 99,500
2,000
1,900
1,700
1,400
1,500
1,300
2,700
2,500
2,200
1,900
2,000
1,700
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
190
192
198
198
198
198
240
268
302
302
362
362
244.5
273
311.5
311.5
371.5
371.5
2
2
3
3
3
3
1
1
1.5
1.5
1.5
1.5
216
365
495
445
695
635
335
560
780
705
1 170
1 070
22,000 34,500
37,000 57,000
50,000 79,500
45,000 72,000
71,000 119,000
64,500 109,000
1,900
1,800
1,600
1,400
1,400
1,200
2,500
2,300
2,100
1,800
1,900
1,600
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
200
202
208
208
212
212
250
278
322
322
378
378
254.5
283
331.5
331.5
390
390
2
2
3
3
4
4
1
1
1.5
1.5
2
2
300
410
550
495
730
665
465
650
900
815
1 210
1 110
30,500 47,000
41,500 66,000
56,000 92,000
50,500 83,000
74,500 124,000
68,000 113,000
1,800
1,700
1,500
1,300
1,300
1,200
2,400
2,200
2,000
1,700
1,800
1,500
DB
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
DT
212
212
218
218
222
222
268
298
342
342
398
398
273
303
351.5
351.5
410
410
2
2
3
3
4
4
1
1
1.5
1.5
2
2
305
475
31,000
48,500
1,600
2,100
DB
DF
DT
232
288
293
320
530
32,500
54,000
1,500
1,900
DB
DF
DT
252
308
313
420
750
42,500
76,500
1,300
1,800
DB
DF
DT
272
348
353
425
775
43,000
79,000
1,200
1,600
DB
DF
DT
292
368
373
530
1 040
54,000 106,000
1,100
1,500
DB
DF
DT
314
406
413
2.5
B-55
High Speed Single and Duplex Arrangements

2B
B
r
ra
r1
ra
r
d
Da
Single
a
Tandem
arrangement
(DT)
Face-to-face
arrangement
(DF)
Back-to-back
arrangement
(DB)
da
d 1040mm
Boundary dimensions
Basic load ratings

dynamic
mm
static
dynamic
kN
2
Limiting speeds
static
kgf
Bearing
numbers
rpm
Load
center
Mass
mm
kg
single
(approx.)
grease
oil
225
269
43,000
41,000
58,000
55,000
7000C
7200C
6.5
7
0.019
0.029
555
720
269
355
39,000
36,000
52,000
49,000
7001C
7201C
6.5
8
0.021
0.036
3.40
4.50
6.85
635
915
1,360
345
460
700
34,000
32,000
28,000
45,000
42,000
38,000
7002C
7202C
7302C
7.5
9
10.5
0.029
0.045
0.081
7.70
11.2
15.7
4.10
5.75
8.25
785
1,140
1,600
420
590
840
31,000
29,000
26,000
41,000
38,000
35,000
7003C
7203C
7303C
8.5
10
11.5
0.038
0.062
0.109
0.3
0.6
0.6
10.5
14.6
18.5
6.05
8.15
9.95
1,070
1,490
1,890
615
835
1,020
27,000
25,000
23,000
36,000
34,000
31,000
7004C
7204C
7304C
10
11.5
12.5
0.066
0.1
0.14
0.3
0.3
0.6
1
1.1
0.15
0.15
0.3
0.6
0.6
5.05
7.85
11.7
16.6
26.4
3.85
5.40
7.45
10.2
15.3
515
800
1,190
1,690
2,690
390
555
755
1,050
1,560
27,000
25,000
23,000
21,000
19,000
36,000
33,000
31,000
28,000
26,000
7805C
7905C
7005C
7205C
7305C
7.5
9
11
12.5
14.5
0.021
0.042
0.078
0.121
0.222
14
18
26
32
38
0.3
0.3
1
1
1.1
0.15
0.15
0.6
0.6
0.6
5.35
8.30
15.1
23.0
32.5
4.50
6.25
10.3
14.7
20.3
545
845
1,540
2,350
3,300
460
640
1,050
1,500
2,070
23,000
21,000
20,000
18,000
16,000
31,000
28,000
26,000
24,000
22,000
7806C
7906C
7006C
7206C
7306C
8.5
9.5
12.5
14
16.5
0.025
0.048
0.112
0.191
0.33
7
10
14
17
21
14
20
28
34
42
0.3
0.6
1
1.1
1.5
0.15
0.3
0.6
0.6
1
5.80
13.2
19.1
30.5
40.5
5.25
9.65
13.7
19.9
25.8
590
1,340
1,950
3,100
4,100
535
985
1,390
2,030
2,630
20,000
19,000
17,000
16,000
14,000
27,000
25,000
23,000
21,000
19,000
7807C
7907C
7007C
7207C
7307C
9
11
13.5
15.5
18
0.028
0.073
0.149
0.273
0.44
7
12
15
18
14
24
30
36
0.3
0.6
1
1.1
0.15
0.3
0.6
0.6
6.05
14.0
20.6
36.5
5.75
11.1
15.9
25.2
615
1,420
2,100
3,700
585
1,140
1,620
2,570
18,000
17,000
15,000
14,000
24,000
22,000
21,000
19,000
7808C
7908C
7008C
7208C
9.5
13
14.5
17
0.031
0.109
0.184
0.35
2B
rs min
rls min
10
26
30
8
9
16
18
0.3
0.6
12
28
32
8
10
16
20
15
32
35
42
9
11
13
17
35
40
47
20
Cr
Cor
Cr
Cor
0.15
0.3
4.90
5.40
2.20
2.64
500
555
0.3
0.6
0.15
0.3
5.40
7.10
2.64
3.45
18
22
26
0.3
0.6
1
0.15
0.3
0.6
6.25
9.00
13.30
10
12
14
20
24
28
0.3
0.6
1
0.15
0.3
0.6
42
47
52
12
14
15
24
28
30
0.6
1
1.1
25
37
42
47
52
62
7
9
12
15
17
14
18
24
30
34
30
42
47
55
62
72
7
9
13
16
19
35
47
55
62
72
80
40
52
62
68
80
1 This value was achieved with laminated phenol resin machined cages; in the case of molded resin cages,with oil lubricant, the value will be 75% of this.
B-56

r1a

dynamic
PrXFrYFa
ra
Single, DT
DB, DF
Fa/Fre Fa/Fre Fa/Fre Fa/Fre
X
Y
X
Y
X
Y
X
Y
Fa
ra
da
Db
0.010
0.020
0.040
0.070
0.10
0.15
0.20
0.30
0.40
0.50
da
Da
Cor
ra
0.37
0.39
0.41
0.44
0.46
0.49
0.51
0.55
0.56
0.56
1.51
1.45
1.36
1.28
0.44 1.22
1.15
1.10
1.02
1.00
1.00
2.46
1.70
2.35
1.62
2.21
1.52
2.08
1.43
1.37 0.72 1.98
1.87
1.29
1.78
1.23
1.66
1.15
1.63
1.12
1.63
1.12
static
PorXo FrYo Fa
Single, DT
Xo
Yo
0.5
0.46
DB, DF
Xo
1
Yo
0.92

Basic load ratings

dynamic
static
dynamic
static
(duplex)
(duplex)
kN
kgf
Cr
Cor
Cr
Cor
Limiting speeds
(duplex)
rpm
grease
oil
Bearing numbers
DB
DF
DT
da
Da
mm
Db
ras
r1as
min
max
max
max
max
7.95
8.80
4.40
5.25
815
900
450
540
34,000
32,000
46,000
43,000
DB
DB
DF
DF
DT
DT
12.5
14.5
23.5
25.5
24.8
27.5
0.3
0.6
0.15
0.3
8.80
11.5
5.25
6.95
900
1,170
540
705
31,000
29,000
41,000
38,000
DB
DB
DF
DF
DT
DT
14.5
16.5
25.5
27.5
26.8
29.5
0.3
0.6
0.15
0.3
10.1
14.6
21.6
6.75
9.05
13.7
1,030
1,490
2,200
690
920
1,400
27,000
25,000
23,000
36,000
33,000
30,000
DB
DB
DB
DF
DF
DF
DT
DT
DT
17.5
19.5
20.5
29.5
30.5
36.5
30.8
32.5
37.5
0.3
0.6
1
0.15
0.3
0.6
12.5
18.1
25.6
8.25
11.5
16.5
1,280
1,850
2,610
840
1,180
1,680
24,000
23,000
21,000
33,000
30,000
27,000
DB
DB
DB
DF
DF
DF
DT
DT
DT
19.5
21.5
22.5
32.5
35.5
41.5
33.8
37.5
42.5
0.3
0.6
1
0.15
0.3
0.6
17.0
23.7
30.0
12.1
16.3
19.9
1,740
2,420
3,050
1,230
1,670
2,030
22,000
20,000
18,000
29,000
27,000
24,000
DB
DB
DB
DF
DF
DF
DT
DT
DT
24.5
25.5
27
37.5
41.5
45
39.5
42.5
47.5
0.6
1
1
0.3
0.6
0.6
8.20
12.7
19.0
27.0
43.0
7.65
10.8
14.9
20.5
30.5
835
1,300
1,940
2,750
4,350
780
1,110
1,510
2,090
3,100
21,000
19,000
18,000
17,000
15,000
28,000
26,000
24,000
22,000
20,000
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
27.5
27.5
29.5
30.5
32
34.5
39.5
42.5
46.5
55
35.8
40.8
44.5
47.5
57.5
0.3
0.3
0.6
1
1
0.15
0.15
0.3
0.6
0.6
8.70
13.5
24.6
37.5
52.5
9.00
12.5
20.6
29.5
40.5
890
1,380
2,510
3,800
5,350
920
1,280
2,100
3,000
4,150
18,000
17,000
16,000
14,000
13,000
24,000
22,000
21,000
19,000
17,000
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
32.5
32.5
35.5
35.5
37
39.5
44.5
49.5
56.5
65
40.8
45.8
50.5
57.5
67.5
0.3
0.3
1
1
1
0.15
0.15
0.6
0.6
0.6
9.40
21.4
31.0
49.5
65.5
10.5
19.3
27.3
40.0
51.5
960
2,180
3,150
5,050
6,700
1,070
1,970
2,790
4,050
5,250
16,000
15,000
14,000
13,000
11,000
21,000
20,000
18,000
17,000
15,000
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
37.5
39.5
40.5
42
43.5
44.5
50.5
56.5
65
71.5
45.8
52.5
57.5
67.5
74.5
0.3
0.6
1
1
1.5
0.15
0.3
0.6
0.6
1
9.80
22.7
33.5
59.0
11.5
22.3
32.0
50.5
1,000
2,310
3,400
6,000
1,170
2,270
3,250
5,150
14,000
13,000
12,000
11,000
19,000
18,000
16,000
15,000
DB
DB
DB
DB
DF
DF
DF
DF
DT
DT
DT
DT
42.5
44.5
45.5
47
49.5
57.5
62.5
73
50.8
59.5
63.5
75.5
0.3
0.6
1
1
0.15
0.3
0.6
0.6
3 For back-to-back and face-to-face duplex arrangements, find with the formula 2Fa / Cor.
Note: This bearing has a contact angle of 15and is manufactured with accuracies of JIS Class 5 or higher.
B-57

2B
B
r
ra
r1
ra
r
d
Da
Single
a
Tandem
arrangement
(DT)
Face-to-face
arrangement
(DF)
Back-to-back
arrangement
(DB)
da
d 4075mm
Boundary dimensions
Basic load ratings

dynamic
mm
static
dynamic
kN
2
Limiting speeds
static
kgf
Bearing
numbers
rpm
Load
center
Mass
mm
kg
single
(approx.)
Cor
grease
oil
5,050
3,300
13,000
17,000
7308C
20
0.606
7.40
14.1
19.3
28.8
43.0
775
1,760
2,490
4,150
6,550
755
1,430
1,960
2,940
4,400
16,000
15,000
14,000
13,000
11,000
21,000
20,000
19,000
17,000
15,000
7809C
7909C
7009C
7209C
7309C
10.5
13.5
16
18
22.5
0.038
0.126
0.233
0.4
0.83
7.90
18.3
26.0
43.0
75.0
8.05
15.8
21.9
31.5
51.5
805
1,870
2,650
4,350
7,650
820
1,620
2,230
3,250
5,250
14,000
14,000
13,000
12,000
10,000
19,000
18,000
17,000
15,000
14,000
7810C
7910C
7010C
7210C
7310C
11
14
16.5
19.5
24.5
0.049
0.131
0.253
0.454
1.05
0.15
0.6
0.6
1
1
13.1
19.1
34.0
53.0
87.0
12.7
17.7
28.6
40.0
60.5
1,330
1,950
3,500
5,400
8,850
1,300
1,810
2,920
4,100
6,200
13,000
12,000
12,000
11,000
9,400
18,000
16,000
15,000
14,000
13,000
7811C
7911C
7011C
7211C
7311C
13
15.5
18.5
21
26.5
0.079
0.178
0.37
0.593
1.34
0.3
1
1.1
1.5
2.1
0.15
0.6
0.6
1
1.1
13.4
20.0
35.0
64.0
99.0
13.6
19.5
30.5
49.5
70.5
1,370
2,040
3,550
6,550
10,100
1,390
1,990
3,150
5,050
7,150
12,000
11,000
11,000
9,700
8,700
16,000
15,000
14,000
13,000
12,000
7812C
7912C
7012C
7212C
7312C
14
16
19.5
22.5
28.5
0.101
0.191
0.387
0.757
1.68
20
26
36
46
66
0.6
1
1.1
1.5
2.1
0.3
0.6
0.6
1
1.1
14.1
20.2
37.0
70.0
112
14.9
20.4
34.5
55.0
80.5
1,440
2,060
3,800
7,100
11,400
1,520
2,080
3,500
5,600
8,200
11,000
11,000
9,900
9,000
8,100
15,000
14,000
13,000
12,000
11,000
7813C
7913C
7013C
7213C
7313C
15
17
20
24
30
0.122
0.204
0.421
0.948
2.06
10
16
20
24
35
20
32
40
48
70
0.6
1
1.1
1.5
2.1
0.3
0.6
0.6
1
1.1
14.5
28.9
47.0
76.0
126
15.8
29.0
43.0
60.0
92.0
1,470
2,950
4,800
7,750
12,900
1,610
2,960
4,400
6,150
9,350
10,000
9,900
9,200
8,300
7,500
14,000
13,000
12,000
11,000
10,000
7814C
7914C
7014C
7214C
7314C
15.5
19.5
22
25
32
0.13
0.331
0.583
1.04
2.5
10
16
20
32
0.6
1
0.3
0.6
14.8
29.4
16.7
30.5
1,510
3,000
1,700
3,100
9,700
9,200
13,000
12,000
7815C
7915C
16.5
20
0.138
0.35
2B
rs min
rls min
40
90
23
46
1.5
45
58
68
75
85
100
7
12
16
19
25
14
24
32
38
50
50
65
72
80
90
110
7
12
16
20
27
55
72
80
90
100
120
Cr
Cor
49.5
32.5
0.3
0.6
1
1.1
1.5
0.15
0.3
0.6
0.6
1
7.60
17.3
24.4
41.0
64.0
14
24
32
40
54
0.3
0.6
1
1.1
2
0.15
0.3
0.6
0.6
1
9
13
18
21
29
18
26
36
42
58
0.3
1.0
1.1
1.5
2.0
60
78
85
95
110
130
10
13
18
22
31
20
26
36
44
62
65
85
90
100
120
140
10
13
18
23
33
70
90
100
110
125
150
75
95
105
Cr
B-58

r1a

dynamic
PrXFrYFa
ra
Single, DT
DB, DF
X
Y
X
Y
X
Y
X
Y
Fa
ra
da
Db
0.010
0.020
0.040
0.070
0.10
0.15
0.20
0.30
0.40
0.50
da
Da
Cor
ra
0.37
0.39
0.41
0.44
0.46
0.49
0.51
0.55
0.56
0.56
1.51
1.45
1.36
1.28
0.44 1.22
1.15
1.10
1.02
1.00
1.00
2.46
1.70
2.35
1.62
2.21
1.52
2.08
1.43
1.37 0.72 1.98
1.87
1.29
1.78
1.23
1.66
1.15
1.63
1.12
1.63
1.12
static
PorXo FrYo Fa
Single, DT
Xo
Yo
0.5
DB, DF
Xo
0.46
Yo
0.92

Basic load ratings

dynamic
static
dynamic
static
(duplex)
(duplex)
kN
kgf
Cr
Cor
Cr
Cor
Limiting speeds
(duplex)
rpm
grease
oil
Bearing numbers
DB
DF
DT
da
Da
mm
Db
ras
r1as
min
max
max
max
max
80.0
64.5
8,150
6,600
10,000
13,000
DB
DF
DT
48.5
81.5
84.5
1.5
12.3
28.1
39.5
66.5
104
14.8
28.1
38.5
57.5
86.0
1,260
2,870
4,050
6,750
10,600
1,510
2,870
3,950
5,850
8,800
13,000
12,000
11,000
10,000
9,000
17,000
16,000
15,000
13,000
12,000
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
47.5
49.5
50.5
52
53.5
55.5
63.5
69.5
78
91.5
56.8
65.5
70.5
80.5
94.5
0.3
0.6
1
1
1.5
0.15
0.3
0.6
0.6
1
12.8
29.8
42.0
69.5
122
16.1
31.5
44.0
63.5
103
1,300
3,050
4,300
7,100
12,400
1,640
3,250
4,450
6,450
10,500
11,000
11,000
10,000
9,100
8,200
15,000
14,000
13,000
12,000
11,000
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
52.5
54.5
55.5
57
60
62.5
67.5
74.5
83
100
63.8
69.5
75.5
85.5
104.5
0.3
0.6
1
1
2
0.15
0.3
0.6
0.6
1
21.2
31.0
55.5
86.0
141
25.5
35.5
57.5
80.0
121
2,160
3,150
5,650
8,750
14,400
2,600
3,600
5,850
8,150
12,400
10,000
9,800
9,200
8,300
7,500
14,000
13,000
12,000
11,000
9,900
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
57.5
60.5
62
63.5
65
69.5
74.5
83
91.5
110
70.8
75.5
85.5
94.5
114.5
0.3
1
1
1.5
2
0.15
0.6
0.6
1
1
21.8
32.5
57.0
104
161
27.2
39.0
61.5
99.0
141
2,230
3,300
5,800
10,600
16,400
2,770
4,000
6,250
10,100
14,300
9,600
9,000
8,400
7,700
6,900
13,000
12,000
11,000
10,000
9,200
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
62.5
65.5
67
68.5
72
75.5
79.5
88
101.5
118
76.8
80.5
90.5
104.5
123
0.3
1
1
1.5
2
0.15
0.6
0.6
1
1
22.9
33.0
60.5
113
182
29.9
40.5
68.5
110
161
2,340
3,350
6,150
11,600
18,600
3,050
4,150
7,000
11,200
16,400
8,900
8,400
7,800
7,100
6,400
12,000
11,000
10,000
9,500
8,500
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
69.5
70.5
72
73.5
77
80.5
84.5
93
111.5
128
82.5
85.5
95.5
114.5
133
0.6
1
1
1.5
2
0.3
0.6
0.6
1
1
23.5
47.0
76.0
123
205
31.5
58.0
86.0
120
184
2,390
4,800
7,750
12,600
20,900
3,250
5,900
8,750
12,300
18,700
8,200
7,800
7,300
6,600
5,900
11,000
10,000
9,700
8,800
7,900
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
74.5
75.5
77
78.5
82
85.5
94.5
103
116.5
138
87.5
95.5
105.5
119.5
143
0.6
1
1
1.5
2
0.3
0.6
0.6
1
1
24.0
47.5
33.5
61.0
2,450
4,850
3,400
6,200
7,700
7,300
10,000
9,700
DB
DB
DF
DF
DT
DT
79.5
80.5
90.5
99.5
92.5
100.5
0.6
1
0.3
0.6
B-59
d 75105mm
Boundary dimensions
Basic load ratings

dynamic
mm
d
2B
static
dynamic
kN
2
rs min
rls min
Cr
Limiting speeds
static
kgf
Cor
Cr
rpm
Cor
grease
oil
Bearing
numbers
Load
center
mm
kg
single
(approx.)
80
85
90
95
100
105
B-60
Mass

r1a

dynamic
PrXFrYFa
ra
Single, DT
DB, DF
X
Y
X
Y
X
Y
X
Y
Fa
ra
da
Db
0.010
0.020
0.040
0.070
0.10
0.15
0.20
0.30
0.40
0.50
da
Da
Cor
ra
0.37
0.39
0.41
0.44
0.46
0.49
0.51
0.55
0.56
0.56
1.51
1.45
1.36
1.28
0.44 1.22
1.15
1.10
1.02
1.00
1.00
2.46
1.70
2.35
1.62
2.21
1.52
2.08
1.43
1.37 0.72 1.98
1.87
1.29
1.78
1.23
1.66
1.15
1.63
1.12
1.63
1.12
static
PorXo FrYo Fa
Single, DT
Xo
Yo
0.5
DB, DF
Xo
0.46
Yo
0.92

Basic load ratings

dynamic
static
dynamic
static
(duplex)
(duplex)
kN
kgf
Cr
Cor
Cr
Cor
Limiting speeds
(duplex)
rpm
grease
oil
Bearing numbers
DB
DF
DT
da
Da
mm
Db
ras
r1as
min
max
max
max
max
78.0
129
223
91.5
131
208
7,950
13,100
22,800
9,300
13,400
21,200
6,800
6,200
5,500
9,000
8,200
7,400
DB
DB
DB
DF
DF
DF
DT
DT
DT
82
83.5
87
108
121.5
148
110.5
124.5
153
1
1.5
2
0.6
1
1
24.6
48.5
95.5
151
242
35.0
63.0
111
155
234
2,510
4,950
9,700
15,400
24,700
3,600
6,450
11,300
15,800
23,800
7,200
6,800
6,400
5,800
5,200
9,600
9,100
8,500
7,700
6,900
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
84.5
85.5
87
90
92
95.5
104.5
118
130
158
97.5
105.5
120.5
134.5
163
0.6
1
1
2
2
0.3
0.6
0.6
1
1
36.0
65.0
98.0
169
261
49.5
84.5
117
181
261
3,650
6,650
9,950
17,200
26,600
5,050
8,650
12,000
18,400
26,600
6,800
6,400
6,000
5,400
4,900
9,100
8,600
8,000
7,200
6,500
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
90.5
92
92
95
99
104.5
113
123
140
166
105.5
115.5
125.5
144.5
173
1
1
1
2
2.5
0.6
0.6
0.6
1
1
37.0
64.5
116
199
297
52.5
85.0
138
209
315
3,750
6,550
11,900
20,300
30,500
5,350
8,700
14,100
21,400
32,000
6,400
6,100
5,700
5,100
4,600
8,500
8,100
7,500
6,800
6,100
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
95.5
97
98.5
100
104
109.5
118
131.5
150
176
110.5
120.5
134.5
154.5
183
1
1
1.5
2
2.5
0.6
0.6
1
1
1
38.0
67.0
119
226
320
55.5
91.5
146
240
350
3,850
6,850
12,200
23,000
32,500
5,650
9,350
14,900
24,400
35,500
6,000
5,800
5,400
4,800
4,300
8,000
7,700
7,100
6,400
5,800
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
100.5
102
103.5
107
109
114.5
123
136.5
158
186
115.5
125.5
139.5
163
193
1
1
1.5
2
2.5
0.6
0.6
1
1
1
38.0
86.0
122
242
360
56.5
117
154
254
415
3,900
8,750
12,500
24,700
37,000
5,750
12,000
15,800
25,900
42,000
5,700
5,400
5,100
4,600
4,100
7,600
7,200
6,800
6,100
5,500
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
105.5
107
108.5
112
114
119.5
133
141.5
168
201
120.5
135.5
144.5
173
208
1
1
1.5
2
2.5
0.6
0.6
1
1
1
39.0
87.5
143
264
385
59.5
123
179
286
450
4,000
8,900
14,600
26,900
39,000
6,050
12,500
18,200
29,100
46,000
5,500
5,200
4,800
4,400
3,900
7,300
6,900
6,400
5,800
5,200
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
110.5
112
115
117
119
124.5
138
150
178
211
125.5
140.5
154.5
183
218
1
1
2
2
2.5
0.6
0.6
1
1
1
B-61
d 110200mm
Boundary dimensions
Basic load ratings

dynamic
mm
d
2B
static
dynamic
kN
2
rs min
rls min
Cr
Limiting speeds
static
kgf
Cor
Cr
rpm
Cor
grease
oil
Bearing
numbers
Load
center
mm
kg
single
(approx.)
110
120
130
140
150
160
170
180
B-62
Mass

r1a

dynamic
PrXFrYFa
ra
Single, DT
DB, DF
X
Y
X
Y
X
Y
X
Y
Fa
ra
da
Db
0.010
0.020
0.040
0.070
0.10
0.15
0.20
0.30
0.40
0.50
da
Da
Cor
ra
0.37
0.39
0.41
0.44
0.46
0.49
0.51
0.55
0.56
0.56
1.51
1.45
1.36
1.28
0.44 1.22
1.15
1.10
1.02
1.00
1.00
2.46
1.70
2.35
1.62
2.21
1.52
2.08
1.43
1.37 0.72 1.98
1.87
1.29
1.78
1.23
1.66
1.15
1.63
1.12
1.63
1.12
static
PorXo FrYo Fa
Single, DT
Xo
Yo
0.5
DB, DF
Xo
0.46
Yo
0.92

Basic load ratings

dynamic
static
dynamic
static
(duplex)
(duplex)
kN
kgf
Cr
Cor
Cr
Cor
Limiting speeds
(duplex)
rpm
grease
oil
Bearing numbers
DB
DF
DT
da
Da
mm
Db
ras
r1as
min
max
max
max
max
56.0
89.0
164
286
405
85.0
127
203
320
485
5,750
9,050
16,700
29,200
41,000
8,700
12,900
20,700
32,500
49,000
5,200
4,900
4,600
4,100
3,700
6,900
6,600
6,100
5,500
5,000
DB
DB
DB
DB
DB
DF
DF
DF
DF
DF
DT
DT
DT
DT
DT
115.5
117
120
122
124
134.5
143
160
188
226
135.5
145.5
164.5
193
233
1
1
2
2
2.5
0.6
0.6
1
1
1
57.0
109
168
325
89.5
157
216
385
5,800
11,200
17,100
33,000
9,100
16,000
22,000
39,000
4,700
4,500
4,200
3,800
6,300
6,000
5,600
5,000
DB
DB
DB
DB
DF
DF
DF
DF
DT
DT
DT
DT
125.5
127
130
144.5
158
170
145.5
160.5
174.5
1
1
2
0.6
0.6
1
B-63
Ultra-High Speed Angular Contact Ball Bearings

BNT type
dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr e
Fr
e
Cor
X Y X
Y
0.010 0.35
1.58
0.020 0.36
1.54
0.040 0.38
1.48
0.070 0.40
1.41
0.10 0.41
1.37
1
0 0.44
0.15 0.43
1.31
0.20 0.44
1.26
0.30 0.47
1.20
0.40 0.49
1.15
0.50 0.50
1.11
static
Por0.52Fr0.54Fa
B
r
ra
r1
ra
r
d
Da
da
d 1045mm
Boundary dimensions
mm
1
Basic load ratings

dynamic static dynamic
static
kN
kgf
1
Limiting speeds
rpm
Cr
Cor
grease
oil
1.45
1.71
385
420
148
175
48,000
46,000
64,000
61,000
4.15
5.40
1.73
2.28
420
550
176
232
43,000
40,000
0.15
0.3
4.75
6.85
2.22
2.97
485
700
226
300
0.3
0.6
0.15
0.3
5.90
8.55
2.70
3.80
600
870
12
14
0.6
1
0.3
0.6
8.00
11.2
3.95
5.35
47
52
12
15
0.6
1
0.3
0.6
8.95
12.7
30
55
62
13
16
1
1
0.6
0.6
35
62
72
14
17
1
1.1
40
68
80
15
18
45
75
85
16
19
rs min
r1s min
Cr
Cor
10
26
30
8
9
0.3
0.6
0.15
0.3
3.75
4.15
12
28
32
8
10
0.3
0.6
0.15
0.3
15
32
35
9
11
0.3
0.6
17
35
40
10
12
20
42
47
25
Bearing
numbers
Abutment and
fillet dimensions
mm
da
Da
ras
Load Mass
center
mm
kg
min
max
max
(approx.)
BNT000
BNT200
12.5
14.5
23.5
25.5
0.3
0.6
6.5
7
0.015
0.019
57,000
54,000
BNT001
BNT201
14.5
16.5
25.5
27.5
0.3
0.6
6.5
8
0.020
0.025
38,000
35,000
50,000
47,000
BNT002
BNT202
17.5
19.5
29.5
30.5
0.3
0.6
7.5
9
0.029
0.035
275
385
34,000
32,000
46,000
42,000
BNT003
BNT203
19.5
21.5
32.5
35.5
0.3 8.5
0.6 10
0.033
0.054
815
1,140
405
545
30,000
28,000
40,000
38,000
BNT004
BNT204
24.5
25.5
37.5
41.5
0.6 10
1
11.5
0.057
0.092
4.85
6.70
910
1,290
495
685
25,000
24,000
34,000
31,000
BNT005
BNT205
29.5
30.5
42.5
46.5
0.6 11
1
12.5
0.067
0.127
11.6
17.6
6.75
9.60
1,180
1,800
685
980
22,000
20,000
29,000
27,000
BNT006
BNT206
35.5
35.5
49.5
56.5
1
1
12.5
14
0.109
0.201
0.6
0.6
14.6
23.2
8.95
13.1
1,490
2,370
910
1,330
19,000
18,000
26,000
24,000
BNT007
BNT207
40.5
42
56.5
65
1
1
13.5
15.5
0.146
0.294
1
1.1
0.6
0.6
15.7
27.8
10.4
16.5
1,600
2,830
1,060
1,680
17,000
16,000
23,000
21,000
BNT008
BNT208
45.5
47
62.5
73
1
1
14.5
17
0.182
0.383
1
1.1
0.6
0.6
18.6
31.0
12.6
18.9
1,900
3,200
1,290
1,920
15,000
14,000
21,000
19,000
BNT009
BNT209
50.5
52
69.5
78
1
1
16
18
0.235
0.437

Note: This bearing is manufactured with accuracies of JIS Class 5 or higher.
B-64

HSB type
dynamic
PrXFrYFa
Fa
Fa
Fa
e
Fr e
Fr
e
Cor
X Y X
Y
0.010 0.35
1.58
0.020 0.36
1.54
0.040 0.38
1.48
0.070 0.40
1.41
0.10 0.41
1.37
1
0 0.44
0.15 0.43
1.31
0.20 0.44
1.26
0.30 0.47
1.20
0.40 0.49
1.15
0.50 0.50
1.11
static
Por0.52Fr0.54Fa
B
r
r1
r1
ra
ra
da
Da
d 50110mm
Boundary dimensions
Basic load ratings

static
kN
kgf
mm
1
Limiting speeds
rpm
grease
oil
745
1,160
15,000
14,000
20,000
19,000
1,380
2,300
940
1,380
14,000
13,000
9.95
15.0
1,420
2,410
1,010
1,530
14.3
24
10.7
15.8
1,460
2,450
0.6
0.6
18
29.4
13.5
19.9
1
1.1
0.6
0.6
18.5
31.5
16
22
1
1.1
0.6
0.6
120
130
18
22
1.1
1.1
90
125
140
18
24
95
130
145
100
rs min
r1s min
50
72
80
12
16
0.6
1
0.3
0.6
55
80
90
13
18
1
1.1
60
85
95
13
18
65
90
100
70
Cr
Cor
Cr
10.6
20.8
7.30
11.4
1,080
2,120
0.6
0.6
13.5
22.6
9.20
13.6
1
1.1
0.6
0.6
13.9
23.7
13
18
1
1.1
0.6
0.6
100
110
16
20
1
1.1
75
105
115
16
20
80
110
125
85
Cor
Bearing
numbers
Abutment and
fillet dimensions
mm
da
Da
ras
Load Mass
center
mm
kg
a
max
HSB910C
HSB010C
54.5
55.5
67.5
74.5
0.6 14
1
16.5
0.141
0.256
18,000
17,000
HSB911C
HSB011C
60.5
62
74.5
83
1
1
15.5
18.5
0.192
0.397
13,000
12,000
17,000
16,000
HSB912C
HSB012C
65.5
67
79.5
88
1
1
16
19.5
0.206
0.425
1,090
1,610
12,000
11,000
16,000
15,000
HSB913C
HSB013C
70.5
72
84.5
93
1
1
17
20
0.22
0.452
1,830
3,000
1,370
2,030
11,000
10,000
15,000
14,000
HSB914C
HSB014C
75.5 94.5
77 103
1
1
19.5
22
0.362
0.64
14.4
22.4
1,880
3,200
1,470
2,290
10,000
9,500
14,000
13,000
HSB915C
HSB015C
80.5 99.5
82 108
1
1
20
22.5
0.383
0.68
18.9
36
15.4
25.7
1,930
3,650
1,570
2,620
9,600
8,900
13,000
12,000
HSB916C
HSB016C
85.5 104.5
87 118
1
1
20.5
24.5
0.405
0.915
0.6
0.6
22.7
36.5
18.3
26.8
2,320
3,700
1,860
2,740
9,000
8,400
12,000
11,000
HSB917C
HSB017C
92
92
1
1
22.5
25.5
0.578
0.959
1.1
1.5
0.6
1
23.4
42
19.5
31.5
2,380
4,300
1,980
3,200
8,500
7,900
11,000
11,000
HSB918C
HSB018C
97 118
98.5 131.5
1
23.5
1.5 27.5
0.607
1.25
18
24
1.1
1.5
0.6
1
24
42.5
20.6
32.5
2,440
4,350
2,110
3,350
8,100
7,500
11,000
10,000
HSB919C 102 123

HSB019C 103.5 136.5
1
24
1.5 28
0.636
1.3
140
150
20
24
1.1
1.5
0.6
1
33.5
44
28
35
3,450
4,500
2,850
3,600
7,600
7,100
10,000
9,500
HSB920C 107 133

HSB020C 108.5 141.5
1
26
1.5 28.5
0.856
1.36
105
145
160
20
26
1.1
2
0.6
1
34.5
50.5
29.7
40.5
3,550
5,150
3,050
4,150
7,300
6,700
9,700
9,000
HSB921C 112
HSB021C 115
138
150
1
2
26.5
31
0.893
1.73
110
150
170
20
28
1.1
2
0.6
1
35
62.5
30.5
49.5
3,550
6,400
3,150
5,000
6,900
6,400
9,200
8,600
HSB922C 117
HSB022C 120
143
160
1
2
27.5
33
0.928
2.13

B-65
113
123
max
(approx.)
min
PrXFrYFa
B
r
ra
r1
r1
ra
da
Da
Fa
Cor
0.010
0.020
0.040
0.070
0.10
0.15
0.20
0.30
0.40
0.50
0.35
0.36
0.38
0.40
0.41
0.43
0.44
0.47
0.49
0.50
Fa
Fr e
X Y
Fa
e
Fr
X
Y
1.58
1.54
1.48
1.41
1.37
0 0.44
1.31
1.26
1.20
1.15
1.11
d 120170mm
Boundary dimensions
mm
d
rs min
r1s min
Basic load ratings

static
kN
kgf
1
Cr
Cor
Cr
Cor
Limiting speeds
rpm
grease
150
160
170

B-66
oil
Bearing
numbers
Abutment and
fillet dimensions
mm
da
Da
ras
min
max
max
Load Mass
center
mm
kg
a
(approx.)
B-67
Ceramic Ball Angular Contact Ball Bearings

5S-BNT type
B
r
ra
r1
ra
r
d
Da
da
d 1045mm
Boundary dimensions
Basic load ratings

dynamic (approx.)
kN
kgf
mm
d
rs min
10
26
30
8
9
0.3
0.6
12
28
32
8
10
15
32
35
17
rls min
Bearing
numbers
da
Abutment and
fillet dimensions
mm
Da
ras
min
max
max
Load
center
mm
Mass
(approx.)
kg
Cr
Cr
0.15
0.3
3.75
4.95
385
500
5S-BNT000
5S-BNT200
12.5
14.5
23.5
25.5
0.3
0.6
6.5
7
0.013
0.016
0.3
0.6
0.15
0.3
4.15
5.40
420
550
5S-BNT001
5S-BNT201
14.5
16.5
25.5
27.5
0.3
0.6
6.5
8
0.018
0.021
9
11
0.3
0.6
0.15
0.3
4.75
6.85
485
700
5S-BNT002
5S-BNT202
17.5
19.5
29.5
30.5
0.3
0.6
7.5
9
0.026
0.03
35
40
10
12
0.3
0.6
0.15
0.3
5.90
8.55
600
870
5S-BNT003
5S-BNT203
19.5
21.5
32.5
35.5
0.3
0.6
8.5
10
0.029
0.046
20
42
47
12
14
0.6
1
0.3
0.6
8.00
11.2
815
1,140
5S-BNT004
5S-BNT204
24.5
25.5
37.5
41.5
0.6
1
10
11.5
0.05
0.08
25
47
52
12
15
0.6
1
0.3
0.6
8.95
12.7
910
1,290
5S-BNT005
5S-BNT205
29.5
30.5
42.5
46.5
0.6
1
11
12.5
0.059
0.113
30
55
62
13
16
1
1
0.6
0.6
11.6
17.6
1,180
1,800
5S-BNT006
5S-BNT206
35.5
35.5
49.5
56.5
1
1
12.5
14
0.097
0.113
35
62
72
14
17
1
1.1
0.6
0.6
14.6
23.2
1,490
2,370
5S-BNT007
5S-BNT207
40.5
42
56.5
65
1
1
13.5
15.5
0.128
0.255
40
68
80
15
18
1
1.1
0.6
0.6
15.7
27.8
1,600
2,830
5S-BNT008
5S-BNT208
45.5
47
62.5
73
1
1
14.5
17
0.162
0.331
45
75
85
16
19
1
1.1
0.6
0.6
18.6
31.0
1,900
3,200
5S-BNT009
5S-BNT209
50.5
52
69.5
78
1
1
16
18
0.208
0.374

2 There is no JIS regulation table concerning basic rated loads for ceramic ball angular contact ball bearings. In NTN wear life testing, these
bearings displayed the same wear life as steel angular contact ball bearings; therefore, the values for steel bearings have been given as
reference.
B-68
Ceramic Ball Angular Contact Ball Bearings

5S-HSB type
B
r
r1
r1
ra
ra
da
Da
d 50120mm
Boundary dimensions
Basic load ratings

dynamic (approx.)
kN
kgf
mm
1
Bearing
numbers
ras
min
max
max
Load
center
mm
Mass
(approx.)
kg
rs min
rls min
50
72
80
12
16
0.6
1
0.3
0.6
10.6
20.8
1,080
2,120
5S-HSB910C
5S-HSB010C
54.5
55.5
67.5
74.5
0.6
1
14
16.5
0.134
0.234
55
80
90
13
18
1
1.1
0.6
0.6
13.5
22.6
1,380
2,300
5S-HSB911C
5S-HSB011C
60.5
62
74.5
83
1
1
15.5
18.5
0.18
0.372
60
85
95
13
18
1
1.1
0.6
0.6
13.9
23.7
1,420
2,410
5S-HSB912C
5S-HSB012C
65.5
67
79.5
88
1
1
16
19.5
0.194
0.398
65
90
100
13
18
1
1.1
0.6
0.6
14.3
24.0
1,460
2,450
5S-HSB913C
5S-HSB103C
70.5
72
84.5
93
1
1
17
20
0.207
0.423
70
100
110
16
20
1
1.1
0.6
0.6
18.0
29.4
1,830
3,000
5S-HSB914C
5S-HSB014C
75.5
77
94.5
103
1
1
19.5
22
0.343
0.601
75
105
115
16
20
1
1.1
0.6
0.6
18.5
31.5
1,880
3,200
5S-HSB915C
5S-HSB015C
80.5
82
99.5
108
1
1
20
22.5
0.363
0.636
80
110
125
16
22
1
1.1
0.6
0.6
18.9
36.0
1,930
3,650
5S-HSB916C
5S-HSB016C
85.5
87
104.5
118
1
1
20.5
24.5
0.384
0.86
85
120
130
18
22
1.1
1.1
0.6
0.6
22.7
36.5
2,320
3,700
5S-HSB917C
5S-HSB017C
92
92
113
123
1
1
22.5
25.5
0.55
0.901
90
125
140
18
24
1.1
1.5
0.6
1
23.4
42.0
2,380
4,300
5S-HSB918C
5S-HSB018C
97
98.5
118
131.5
1
1.5
23.5
27.5
0.577
1.18
95
130
145
18
24
1.1
1.5
0.6
1
24.0
42.5
2,440
4,350
5S-HSB919C
5S-HSB019C
102
103.5
123
136.5
1
1.5
24
28
0.604
1.23
140
20
24
1.1
1.5
0.6
1
33.5
44.0
3,450
4,500
5S-HSB920C
5S-HSB020C
107
108.5
133
141.5
1
1.5
26
28.5
0.837
1.28
145
20
26
1.1
2
0.6
1
34.5
50.5
3,550
5,150
5S-HSB921C
5S-HSB021C
112
115
138
150
1
2
26.5
31
0.837
1.63
150
20
28
1.1
2
0.6
1
35.0
62.5
3,550
6,400
5S-HSB922C
5S-HSB022C
117
120
143
160
1
2
27.5
33
0.87
1.99
165
22
28
1.1
2
0.6
1
41.0
63.0
4,150
6,450
5S-HSB924C
5S-HSB024C
127
130
158
170
1
2
30
34
1.2
2.13
105 160
110 170
120 180
Cr
da
Abutment and
fillet dimensions
mm
Da
100 150
Cr
1 Minimal allowable dimension for chamfer dimension r or r1. 2 There is no JIS formula concerning basic rated loads for ceramic ball angular contact ball bearings. In NTN fatigue life tests, these bearings
achieved the same fatigue life as steel angular contact ball bearings; therefore, the values for steel bearings have been given as reference.
Note: For bearings with a bore diameter larger than 120mm, consult NTN Engineering.
B-69
Four-Point Contact Ball Bearings

QJ type
B
ra
r
r
ra
da
Da

dynamic
PaFa
static
Poa Fa
d 3090mm
Boundary dimensions
Basic load ratings

dynamic static
dynamic
static
kN
kgf
mm
1
Limiting speeds
rpm
Ca
Coa
Ca
Coa
grease
oil
1.1
39.5
57.5
4,050
5,850
8,000
11,000
21
1.5
49.5
73.0
5,050
7,450
7,000
80
90
18
23
1.1
1.5
44.0
60.5
70.5
91.5
4,500
6,200
7,200
9,350
45
85
100
19
25
1.1
1.5
49.5
81.0
79.0 121
5,050
8,050
50
90
110
20
27
1.1
2
52.0
89.0
92.0 145
55
100
120
21
29
1.5
2
60
110
130
22
31
65
120
140
70
rs min
30
72
19
35
80
40
Bearing
numbers
Abutment and
fillet dimensions
mm
da
Da
ras
Load
center
mm
a
Mass
kg
(approx.)
min
max
max
QJ306
37
65
30
0.42
9,300
QJ307
43.5
71.5
1.5
33
0.57
6,900
6,200
9,200
8,200
QJ208
QJ308
47
48.5
73
81.5
1
1.5
34.5
37.5
0.45
0.78
8,250
12,300
6,200
5,500
8,200
7,400
QJ209
QJ309
52
53.5
78
91.5
1
1.5
37.5
42
0.52
1.05
5,300
9,400
9,050
14,700
5,600
5,000
7,500
6,700
QJ210
QJ310
57
60
83
100
1
2
40.5
46
0.603
1.38
64.0 112
106
170
6,550
10,900
11,400
17,400
5,100
4,600
6,800
6,100
QJ211
QJ311
63.5
65
91.5
110
1.5
2
44.5
50.5
0.78
1.76
1.5
2.1
77.5 138
122
198
7,900
12,400
14,000
20,200
4,700
4,200
6,300
5,700
QJ212
QJ312
68.5
72
101.5
118
1.5
2
49
55
0.98
2.18
23
33
1.5
2.1
84.5 153
138
228
8,600
14,100
15,600
23,200
4,400
3,900
5,800
5,200
QJ213
QJ313
73.5
77
111.5
128
1.5
2
53.5
59
1.24
2.7
125
150
24
35
1.5
2.1
92.0 168
155
260
9,350
15,800
17,200
26,500
4,000
3,600
5,400
4,800
QJ214
QJ314
78.5
82
116.5
138
1.5
2
56.5
63.5
1.36
3.27
75
130
160
25
37
1.5
2.1
96.0 183
169
294
9,750
17,200
18,600
30,000
3,800
3,400
5,000
4,500
QJ215
QJ315
83.5
87
121.5
148
1.5
2
59
68
1.53
3.9
80
140
170
26
39
2
2.1
112
183
217
330
11,400
18,600
22,100
33,500
3,500
3,200
4,700
4,200
QJ216
QJ316
90
92
130
158
2
2
63.5
72
1.83
4.64
85
150
180
28
41
2
3
126
197
252
370
12,800
20,100
25,700
37,500
3,300
3,000
4,400
4,000
QJ217
QJ317
95
99
140
166
2
2.5
68
76.5
2.3
5.43
90
160
190
30
43
2
3
148
212
293
410
15,100
21,600
29,900
41,500
3,100
2,800
4,200
3,800
QJ218 100
QJ318 104
150
176
2
2.5
72
81
2.76
6.31

Note: 1. These bearings are also manufactured with a slot in the chamfer section of the outer ring to stop whirling.
2. This bearing is widely used in applications where the only type of load is axial. When considering it for use where radial loads are applied,
consult NTN Engineering.
B-70
Four-Point Contact Ball Bearings

QJ type
B
ra
r
r
ra
da
Da

dynamic
PaFa
static
Poa Fa
d 95120mm
Boundary dimensions
Basic load ratings

dynamic static
dynamic
static
kN
kgf
mm
d
Limiting speeds
rpm
rs min
Ca
Coa
Ca
Coa
grease
oil
Bearing
numbers
Abutment and
fillet dimensions
mm
da
Da
ras
min
max
Load
center
mm
max
Mass
kg
(approx.)
95
170
200
32
45
2.1
3
168
227
335
450
17,200
23,100
34,000
46,000
3,000
2,700
3,900
3,500
QJ219 107
QJ319 109
158
186
2
2.5
76.5
85
3.35
7.41
100
180
215
34
47
2.1
3
181
273
355
585
18,400
27,800
36,000
59,500
2,800
2,500
3,700
3,400
QJ220 112
QJ320 114
168
201
2
2.5
81
91
4.02
9.14
105
190
225
36
49
2.1
3
197
273
400
585
20,100
27,900
41,000
59,500
2,700
2,400
3,600
3,200
QJ221 117
QJ321 119
178
211
2
2.5
85
4.75
95.5 10.4
110
200
240
38
50
2.1
3
213
305
450
680
21,700
31,000
45,500
69,500
2,500
2,300
3,400
3,100
QJ222 122
QJ322 124
188
226
2
89.5 5.62
2.5 101 12
120
215
260
40
55
2.1
3
240
325
540
765
24,500
33,000
55,000
78,000
2,300
2,100
3,100
2,800
QJ224 132
QJ324 134
203
246
2
96.5 6.75
2.5 110 15.9

Note: 1. These bearings are also manufactured with a slot in the chamfer section of the outer ring to stop whirling.
2. This bearing is widely used in applications where the only type of load is axial. When considering it for use where radial loads are applied,
consult NTN Engineering.
B-71
Double Row Angular Contact Ball Bearings
B
ra
ra
r
D
Da

dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
e
X
Y
X
Y
0.80 1 0.78 0.63 1.24
static
PorFr0.66Fa
da
d 1065mm
Boundary dimensions
dynamic
mm
1
Basic load ratings

static
dynamic
kN
kgf
Limiting speeds
static
Bearing
numbers
rpm
grease
oil
385
14,000
19,000
930
515
13,000
6.05
10.1
1,020
1,760
615
1,030
12.8
20.4
7.90
12.1
1,300
2,080
1
1.1
19.0
20.6
12.1
12.7
20.6
25.4
1
1.1
20.6
30.5
62
72
23.8
30.2
1
1.1
35
72
80
27
34.9
40
80
90
45
rs min
Cr
Cor
Cr
Cor
10
30
14.3
0.6
6.95
3.80
710
12
32
15.9
0.6
9.15
5.05
15
35
42
15.9
19
0.6
1
10.0
17.2
17
40
47
17.5
22.2
0.6
1
20
47
52
20.6
22.2
25
52
62
30
Abutment and
fillet dimensions
mm
da
Da
ras
Load
center
mm
Mass
kg
min
max
max
(approx.)
5200
14.5
25.5
0.6
17.5
0.049
17,000
5201
16.5
27.5
0.6
19
0.057
11,000
9,900
15,000
13,000
5202
5302
19.5
20.5
30.5
36.5
0.6
1
21
26
0.064
0.132
805
1,230
9,900
9,000
13,000
12,000
5203
5303
21.5
22.5
35.5
41.5
0.6
1
24
28.5
0.096
0.181
1,940
2,110
1,230
1,290
8,800
8,000
12,000
11,000
5204
5304
25.5
27
41.5
45
1
1
28
30.5
0.153
0.217
14.3
20.5
2,100
3,100
1,450
2,090
7,300
6,700
9,800
8,900
5205
5305
30.5
32
46.5
55
1
1
31.5
36.5
0.175
0.362
28.6
39.5
20.4
27.5
2,920
4,050
2,080
2,800
6,300
5,700
8,400
7,600
5206
5306
35.5
37
56.5
65
1
1
36.5
43
0.286
0.553
1.1
1.5
38.0
49.5
27.8
35.0
3,850
5,050
2,830
3,550
5,500
5,000
7,400
6,600
5207
5307
42
43.5
65
71.5
1
1.5
42.5
48.5
0.436
0.766
30.2
36.5
1.1
1.5
42.5
60.5
32.5
44.0
4,350
6,150
3,300
4,500
4,900
4,400
6,600
5,900
5208
5308
47
48.5
73
81.5
1
1.5
47.5
53.5
0.59
1.01
85
100
30.2
39.7
1.1
1.5
48.0
72.5
37.0
54.0
4,900
7,400
3,750
5,500
4,400
4,000
5,900
5,300
5209
5309
52
53.5
78
91.5
1
1.5
50.5
60
0.64
1.34
50
90
110
30.2
44.4
1.1
2
51.0
85.5
42.0
64.5
5,200
8,700
4,250
6,600
4,000
3,600
5,300
4,800
5210
5310
57
60
1
2
54
65.5
0.689
1.81
55
100
120
33.3
49.2
1.5
2
63.0
106
53.0
82.0
6,450
10,800
5,400
8,400
3,600
3,300
4,900
4,400
5211
5311
63.5
91.5
65
110
1.5
2
60.5
73
0.986
2.32
60
110
130
36.5
54
1.5
2.1
71.5
122
58.5
95.5
7,300
12,400
5,950
9,750
3,400
3,000
4,500
4,000
5212
5312
68.5 101.5
72
118
1.5
2
65.5
79.5
1.27
3.05
65
120
140
38.1
58.7
1.5
2.1
83.5
138
72.5
109
8,500
14,000
7,400
11,200
3,100
2,800
4,200
3,700
5213
5313
73.5 111.5
77
128
1.5
2
71
84.5
1.57
3.96
B-72
83
100
B
ra
ra
r
D
Da

dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
e
X
Y
X
Y
0.80 1 0.78 0.63 1.24
static
PorFr0.66Fa
da
d 70100mm
Boundary dimensions
dynamic
mm
1
Basic load ratings

static
dynamic
kN
kgf
Limiting speeds
static
Bearing
numbers
rpm
Abutment and
fillet dimensions
mm
da
Da
ras
Load
center
mm
Mass
max
(approx.)
kg
Cr
Cor
grease
oil
79.5
125
9,250
15,800
8,100
12,700
2,900
2,600
3,900
3,500
5214
5314
78.5 116.5
82
138
1.5
2
74.5
93
1.8
4.74
80.5
141
9,200
17,200
8,200
14,400
2,700
2,400
3,600
3,200
5215
5315
83.5 121.5
87
148
1.5
2
78
98
1.9
5.65
95.5
10,800
9,700
2,500
3,400
5216
90
130
83.5
2.39
106
11,400
10,900
2,400
3,200
5217
95
140
91
3.06
140
129
14,300
13,100
2,200
3,000
5218 100
150
95.5
3.73
2.1
159
148
16,200
15,000
2,100
2,800
5219 107
158
101
4.86
2.1
178
167
18,200
17,100
2,000
2,700
5220 112
168
108
5.94
rs min
Cr
70
125
150
39.7
63.5
1.5
2.1
90.5
155
75
130
160
41.3
68.3
1.5
2.1
90.0
168
80
140
44.4
106
85
150
49.2
112
90
160
52.4
95
170
55.6
100
180
60.3
Cor
B-73
min
max
B
r
r
D
a
Shielded type
(ZZ)
Non-contact sealed type

(LLB)
Contact sealed type

(LLU)
d 1040mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
rs min
10
30
14.3
12
32
15
Limiting speeds
Bearing numbers
static
kgf
rpm
Cor
grease
oil
ZZ,LLB,LLU
Z,LB
sealed
non-contact contact
type
type
Cr
Cor
Cr
0.6
6.95
3.80
710
385
14,000
19,000
5200AZZ
LLB
LLU
15.9
0.6
7.60
4.50
775
455
13,000
17,000
5201AZZ
LLB
LLU
35
42
15.9
19
0.6
1
8.20
14.2
5.25
8.85
835
1,450
535
900
11,000
9,900
15,000
13,000
5202BZZ
5302AZZ
LLB
LLB
LLU
LLU
17
40
47
17.5
22.2
0.6
1
10.8
17.4
7.10
10.4
1,100
1,770
720
1,060
9,900
9,000
13,000
12,000
5203BZZ
5303CZZ
LLB
LLB
LLU
LLU
20
47
52
20.6
22.2
1
1.1
15.8
19.1
10.1
12.4
1,610
1,940
1,030
1,260
8,800
8,000
12,000
11,000
5204BZZ
5304BZZ
LLB
LLB
LLU
LLU
25
52
62
20.6
25.4
1
1.1
18.2
26.5
13.2
17.9
1,850
2,700
1,350
1,830
7,300
6,700
9,800
8,900
5205BZZ
5305CZZ
LLB
LLB
LLU
LLU
30
62
72
23.8
30.2
1
1.1
26.1
33.0
19.7
24.3
2,660
3,350
2,010
2,480
6,300
5,700
8,400
7,600
5206CZZ
5306AZZ
LLB
LLB
LLU
LLU
35
72
80
27
34.9
1.1
1.5
33.0
49.5
24.5
35.0
3,350
5,050
2,500
3,550
5,500
5,000
7,400
6,600
5207AZZ
5307AZZ
LLB
LLB
LLU
LLU
40
80
90
30.2
36.5
1.1
1.5
40.5
55.0
32.0
40.0
4,100
5,600
3,250
4,100
4,900
4,400
6,600
5,900
5208AZZ
5308AZZ
LLB
LLB
LLU
LLU

2 This bearing number is for double sealed and double shielded type bearings, but single sealed and single shielded type are also available.
B-74
ra
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
e
X
Y
X
Y
0.80 1 0.78 0.63 1.24
ra
Da
da
static
PorFr0.66Fa

mm
da
min
max
Da
ras
max
max
Load
center
mm
Mass
(approx.)
kg
14.5
16
25.5
0.6
16.5
0.049
16.5
17
27.5
0.6
18.5
0.057
19.5
20.5
20
23
30.5
36.5
0.6
1
20.5
24
0.064
0.132
21.5
22.5
23
25
35.5
41.5
0.6
1
23
27
0.096
0.181
25.5
27
27
28.5
41.5
45
1
1
27.5
29.5
0.153
0.217
30.5
32
32
35
46.5
55
1
1
30.5
35.5
0.175
0.362
35.5
37
39
43
56.5
65
1
1
36.5
41
0.286
0.553
42
43.5
45
47
65
71.5
1
1.5
42
47.5
0.436
0.766
47
48.5
51
54
73
81.5
1
1.5
46
52.5
0.59
1.01
B-75
1. Design features and characteristics
The outer ring raceway of self-aligning ball bearings forms

a spherical surface whose center is common to the bearing
center. The inner ring of the bearing has two raceways. The
balls, cage, and inner ring of these bearings are capable of a
shifting in order to compensate for a certain degree of
misalignment with the outer rings. As a result, the bearing is
able to align itself and compensate for shaft / housing
finishing unevenness, bearing fitting error, and other sources
of misalignment as shown in Diagram 1.
However, since axial load capacity is limited, self-aligning
bearings are not suitable for applications with heavy axial
loads.
Furthermore, if an adapter is used on the tapered bore of
the inner diameter, installation and disassembly are much
simpler and for this reason adapters are often used on
equipment with drive shafts.
Self aligning ball bearings use pressed cages with the

exception of the 1200-1206 series which use molded resin
cages. The material characteristics of the resin cages make
them unsuitable for use in applications where temperatures
exceed 120C.
3. Ball protrusion
Bearings with part numbers listed in Diagram 2 below
have balls which protrude slightly from the bearing face.
Their degree of protrusion is listed in Diagram 2.
B1
B
Units mm
Allowable
misalignment
Bearing
number
1318K
1319K
1320K
1321
1322K
Width
dimension B
43
45
47
49
50
Total width
dimension B1
45
48
52
54
55
Diagram 2.
Diagram 1.
4. Allowable misalignment angle

Listed below are the allowable misalignment angles for
bearings with self-aligning characteristics when placed
under normal load conditions. This degree of allowable
misalignment may be limited by the design of structures
around the bearing.
Allowable misalignment under normal loads (loads
equivalent to 0.09 Cr): 0.07 rad (4)
B-77
B
ra
ra
r
d
Cylindrical bore
Da
da
Tapered bore
taper 1:12
d 1035mm
Boundary dimensions
mm
Basic load ratings

dynamic static
dynamic
static
kN
kgf
Limiting speeds
Bearing numbers
rpm
Abutment and
fillet dimensions
mm
da
Da
ras
Cor
grease
oil
cylindrical
bore
tapered
bore
560
745
740
1,030
122
162
165
219
21,000
19,000
18,000
17,000
24,000
23,000
21,000
20,000
1200
2200
1300
2300
14
14
14
14
26
26
31
31
0.6
0.6
0.6
0.6
1.27
1.73
2.16
2.71
570
775
965
1,200
130
177
221
277
18,000
17,000
16,000
15,000
22,000
20,000
18,000
17,000
1201
2201
1301
2301
16
16
17
17
28
28
32
32
0.6
0.6
1
1
7.45
7.70
9.55
12.0
1.75
1.85
2.30
2.90
760
785
975
1,230
178
188
234
295
16,000
15,000
13,000
13,000
19,000
18,000
16,000
15,000
1202
2202
1302
2302
19
19
20
20
31
31
37
37
0.6
0.6
1
1
0.6
0.6
1
1
7.90
9.80
12.5
14.4
2.01
2.41
3.20
3.55
805
995
1,280
1,470
205
246
325
365
14,000
13,000
12,000
11,000
17,000
16,000
14,000
14,000
1203
2203
1303
2303
21
21
22
22
36
36
42
42
0.6
0.6
1
1
14
18
15
21
1
1
1.1
1.1
9.90
12.6
12.4
18.1
2.61
3.30
3.35
4.70
1,010
1,280
1,270
1,850
266
335
340
480
13,000
12,000
11,000
10,000
15,000
14,000
13,000
12,000
1204
2204
1304
2304
1204K
2204K
1304K
2304K
25
25
26.5
26.5
42
42
45.5
45.5
1
1
1
1
25
52
52
62
62
15
18
17
24
1
1
1.1
1.1
12.1
12.3
18.0
24.4
3.30
3.45
5.00
6.60
1,230
1,250
1,830
2,490
335
350
510
670
11,000
10,000
9,100
8,500
13,000
12,000
11,000
10,000
1205
2205
1305
2305
1205K
2205K
1305K
2305K
30
30
31.5
31.5
47
47
55.5
55.5
1
1
1
1
30
62
62
72
72
16
20
19
27
1
1
1.1
1.1
15.6
15.2
21.3
31.5
4.65
4.50
6.30
8.75
1,590
1,550
2,170
3,200
475
460
645
895
9,200
8,600
7,700
7,200
11,000
10,000
9,100
8,500
1206
2206
1306
2306
1206K
2206K
1306K
2306K
35
35
36.5
36.5
57
57
65.5
65.5
1
1
1
1
35
72
72
80
80
17
23
21
31
1.1
1.1
1.5
1.5
15.8
21.5
25.1
39.5
5.10
6.60
7.85
11.3
1,610
2,190
2,560
4,000
520
670
800
1,150
8,000
7,500
6,800
6,300
9,400
8,800
8,000
7,400
1207
2207
1307
2307
1207K
2207K
1307K
2307K
41.5
41.5
43
43
65.5
65.5
72
72
1
1
1.5
1.5
rs min
10
30
30
35
35
9
14
11
17
12
32
32
37
37
Cr
Cor
Cr
0.6
0.6
0.6
0.6
5.50
7.30
7.25
10.1
1.19
1.59
1.62
2.15
10
14
12
17
0.6
0.6
1
1
5.60
7.60
9.45
11.8
15
35
35
42
42
11
14
13
17
0.6
0.6
1
1
17
40
40
47
47
12
16
14
19
20
47
47
52
52
min
1 Smallest allowable dimension for chamfer dimension r. 2 "K" indicates bearings have tapered bore with a taper ratio of 1: 12.
B-78
max
max

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X Y
1 Y1 0.65 Y2
static
PorFrYo Fa
For values of e
Y1
Y2 and Yo
see the table below.
Constant
Axial load factors
Mass
kg
cylindrical bore tapered bore
Y1
Y2
Yo
0.32
0.64
0.34
0.67
2
0.98
1.85
0.95
3.09
1.52
2.87
1.46
2.09
1.03
1.94
0.99
0.033
0.047
0.058
0.083
0.36
0.58
0.33
0.61
1.76
1.09
1.91
1.03
2.73
1.69
2.95
1.59
1.85
1.14
2
1.08
0.04
0.051
0.066
0.091
0.33
0.50
0.34
0.52
1.91
1.25
1.86
1.22
2.95
1.94
2.88
1.88
2
1.31
1.95
1.27
0.049
0.06
0.092
0.114
0.31
0.51
0.32
0.52
2.03
1.23
1.97
1.22
3.14
1.90
3.06
1.88
2.12
1.29
2.07
1.28
0.072
0.088
0.128
0.156
0.29
0.49
0.29
0.51
2.2
1.3
2.16
1.23
3.4
2.01
3.34
1.9
2.3
1.36
2.26
1.29
0.116
0.14
0.16
0.206
0.114
0.137
0.158
0.201
0.28
0.41
0.28
0.48
2.28
1.55
2.28
1.32
3.53
2.39
3.53
2.05
2.39
1.62
2.39
1.39
0.138
0.157
0.255
0.334
0.135
0.153
0.251
0.326
0.25
0.38
0.26
0.44
2.55
1.64
2.40
1.42
3.94
2.53
3.72
2.2
2.67
1.72
2.52
1.49
0.217
0.256
0.383
0.496
0.213
0.25
0.377
0.485
0.23
0.37
0.25
0.46
2.71
1.69
2.48
1.37
4.2
2.61
3.84
2.13
2.84
1.77
2.60
1.44
0.317
0.392
0.5
0.671
0.312
0.382
0.492
0.653
(approx.)
B-79
B
ra
ra
r
d
Cylindrical bore
Da
da
Tapered bore
taper 1:12
d 4075mm
Boundary dimensions
mm
Basic load ratings

dynamic static
dynamic
static
kN
kgf
Limiting speeds
Bearing numbers
rpm
Abutment and
fillet dimensions
mm
da
Da
ras
Cor
Cr
Cor
grease
oil
cylindrical
bore
tapered
bore
min
max
max
19.3
22.3
29.6
45.0
6.55
7.35
9.70
13.5
1,970
2,270
3,000
4,600
665
750
990
1,380
7,100
6,700
6,000
5,600
8,400
7,900
7,000
6,600
1208
2208
1308
2308
1208K
2208K
1308K
2308K
46.5
46.5
48
48
73.5
73.5
82
82
1
1
1.5
1.5
1.1
1.1
1.5
1.5
21.9
23.2
38.0
54.0
7.35
8.15
12.7
16.7
2,230
2,360
3,900
5,500
750
830
1,300
1,700
6,400
6,000
5,400
5,000
7,500
7,100
6,300
5,900
1209
2209
1309
2309
1209K
2209K
1309K
2309K
51.5
51.5
53
53
78.5
78.5
92
92
1
1
1.5
1.5
20
23
27
40
1.1
1.1
2
2
22.7
23.2
43.5
64.5
8.10
8.45
14.1
20.2
2,320
2,370
4,400
6,550
830
865
1,440
2,060
5,800
5,500
4,900
4,600
6,800
6,400
5,800
5,400
1210
2210
1310
2310
1210K
2210K
1310K
2310K
56.5 83.5
56.5 83.5
59
101
59
101
1
1
2
2
55
100
100
120
120
21
25
29
43
1.5
1.5
2
2
26.8
26.5
51.5
75.5
10.0
9.90
17.9
24.0
2,730
2,700
5,250
7,700
1,020
1,010
1,820
2,450
5,300
5,000
4,500
4,200
6,200
5,800
5,200
4,900
1211
2211
1311
2311
1211K
2211K
1311K
2311K
63
63
64
64
92
92
111
111
1.5
1.5
2
2
60
110
110
130
130
22
28
31
46
1.5
1.5
2.1
2.1
30.0
34.0
57.0
87.0
11.5
12.6
20.8
28.2
3,100
3,450
5,850
8,850
1,180
1,290
2,130
2,880
4,900
4,600
4,100
3,800
5,800
5,400
4,800
4,500
1212
2212
1312
2312
1212K
2212K
1312K
2312K
68
68
71
71
102
102
119
119
1.5
1.5
2
2
65
120
120
140
140
23
31
33
48
1.5
1.5
2.1
2.1
31.0
43.5
62.0
96.0
12.5
16.4
22.9
32.5
3,150
4,450
6,350
9,800
1,280
1,670
2,330
3,300
4,500
4,200
3,800
3,600
5,300
5,000
4,500
4,200
1213
2213
1313
2313
1213K
2213K
1313K
2313K
73
73
76
76
112
112
129
129
1.5
1.5
2
2
70
125
125
150
150
24
31
35
51
1.5
1.5
2.1
2.1
34.5
44.0
74.5
109
13.8
17.1
27.7
37.5
3,550
4,500
7,600
11,100
1,410
1,740
2,830
3,850
4,200
3,900
3,500
3,300
4,900
4,600
4,200
3,900
1214
2214
1314
2314
78
78
81
81
117
117
139
139
1.5
1.5
2
2
75
130
130
160
160
25
31
37
55
1.5
1.5
2.1
2.1
39.0
44.5
79.5
123
15.7
17.8
30.0
43.0
3,950
4,500
8,100
12,500
1,600
1,820
3,050
4,350
3,900
3,700
3,300
3,100
4,600
4,300
3,900
3,600
1215
2215
1315
2315
1215K
2215K
1315K
2315K
83
83
86
86
122
122
149
149
1.5
1.5
2
2
rs min
40
80
80
90
90
18
23
23
33
1.1
1.1
1.5
1.5
45
85
85
100
100
19
23
25
36
50
90
90
110
110
Cr
B-80

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X Y
1 Y1 0.65 Y2
static
PorFrYo Fa
For values of e
Y1
Y2 and Yo
Constant
Axial load factors
Mass
kg
Y1
Y2
Yo
0.22
0.33
0.25
0.43
2.81
1.91
2.57
1.45
4.35
2.95
3.98
2.25
2.95
2.00
2.69
1.52
0.414
0.493
0.709
0.918
0.407
0.482
0.698
0.895
0.21
0.30
0.25
0.41
2.99
2.07
2.56
1.53
4.63
3.20
3.95
2.36
3.13
2.17
2.68
1.60
0.457
0.54
0.953
1.23
0.448
0.528
0.938
1.2
0.21
0.28
0.23
0.42
3.07
2.23
2.7
1.49
4.75
3.45
4.19
2.3
3.21
2.33
2.83
1.56
0.515
0.583
1.2
1.63
0.504
0.569
1.18
1.59
0.20
0.28
0.23
0.41
3.19
2.24
2.71
1.53
4.94
3.47
4.20
2.37
3.34
2.35
2.84
1.6
0.692
0.787
1.58
2.1
0.679
0.769
1.56
2.05
0.18
0.28
0.22
0.40
3.41
2.26
2.85
1.56
5.27
3.5
4.42
2.41
3.57
2.37
2.99
1.63
0.879
1.08
1.96
2.59
0.864
1.06
1.93
2.52
0.17
0.28
0.23
0.38
3.70
2.26
2.74
1.64
5.73
3.5
4.25
2.54
3.88
2.37
2.87
1.72
1.13
1.44
2.42
3.2
1.11
1.41
2.38
3.12
0.18
0.26
0.22
0.38
3.48
2.38
2.83
1.67
5.38
3.68
4.37
2.59
3.64
2.49
2.96
1.75
1.24
1.52
2.99
3.92
0.17
0.25
0.22
0.38
3.61
2.52
2.81
1.65
5.58
3.89
4.35
2.55
3.78
2.63
2.95
1.72
1.33
1.58
3.55
4.78
(approx.)
1.31
1.54
3.5
4.66
B-81
B
ra
ra
r
d
Cylindrical bore
Da
da
Tapered bore
taper 1:12
d 80110mm
Boundary dimensions
mm
Basic load ratings

dynamic static
dynamic
static
kN
kgf
Limiting speeds
Bearing numbers
rpm
Abutment and
fillet dimensions
mm
da
Da
ras
Cor
grease
oil
cylindrical
bore
tapered
bore
4,050
4,950
9,000
13,100
1,730
2,030
3,400
4,600
3,700
3,400
3,100
2,900
4,300
4,000
3,600
3,400
1216
2216
1316
2316
1216K
2216K
1316K
2316K
89
89
91
91
131
131
159
159
2
2
2
2
20.8
23.6
38.0
51.5
5,000
5,950
9,950
14,300
2,120
2,400
3,850
5,250
3,500
3,200
2,900
2,700
4,100
3,800
3,400
3,200
1217
2217
1317
2317
1217K
2217K
1317K
2317K
94
94
98
98
141
141
167
167
2
2
2.5
2.5
57.0
70.0
116
152
23.5
28.7
44.5
57.5
5,800
7,150
11,900
15,500
2,390
2,930
4,550
5,850
3,300
3,100
2,700
2,600
3,800
3,600
3,200
3,000
1218
2218
1318
2318
1218K
2218K
1318K
2318K
99
99
103
103
151
151
177
177
2
2
2.5
2.5
2.1
2.1
3
3
64.0
83.5
132
165
27.1
34.5
51.0
64.5
6,500
8,500
13,400
16,800
2,770
3,500
5,200
6,550
3,100
2,900
2,600
2,400
3,600
3,400
3,000
2,800
1219
2219
1319
2319
1219K
2219K
1319K
2319K
106
106
108
108
159
159
187
187
2
2
2.5
2.5
34
46
47
73
2.1
2.1
3
3
69.0
94.0
143
192
29.7
38.5
57.5
79.0
7,050
9,600
14,600
19,600
3,050
3,900
5,850
8,100
2,900
2,700
2,400
2,300
3,400
3,200
2,900
2,700
1220
2220
1320
2320
1220K
2220K
1320K
2320K
111
111
113
113
169
169
202
202
2
2
2.5
2.5
105
190
190
225
225
36
50
49
77
2.1
2.1
3
3
74.5
109
156
205
32.5
45.0
64.5
87.0
7,600
11,100
15,900
20,900
3,300
4,550
6,600
8,850
2,800
2,600
2,300
2,200
3,300
3,100
2,700
2,600
1221
2221
1321
2321
116
116
118
118
179
179
212
212
2
2
2.5
2.5
110
200
200
240
240
38
53
50
80
2.1
2.1
3
3
80.5
124
164
217
35.5
51.5
71.5
94.5
8,200
12,700
16,700
22,100
3,600
5,250
7,300
9,650
2,600
2,500
2,200
2,100
3,100
2,900
2,600
2,400
1222
2222
1322
2322
1222K
2222K
1322K
2322K
121
121
123
123
189
189
227
227
2
2
2.5
2.5
rs min
80
140
140
170
170
26
33
39
58
85
150
150
180
180
Cr
Cor
2
2
2.1
2.1
40.0
48.5
88.5
128
17.0
19.9
33.0
45.0
28
36
41
60
2
2
3
3
49.0
58.0
97.5
140
90
160
160
190
190
30
40
43
64
2
2
3
3
95
170
170
200
200
32
43
45
67
100
180
180
215
215
Cr
min
B-82
max
max

dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X Y
X Y
1 Y1 0.65 Y2
static
PorFrYo Fa
For values of e
Y1
Y2 and Yo
Constant
Axial load factors
Mass
kg
Y1
Y2
Yo
0.16
0.25
0.22
0.39
3.9
2.52
2.92
1.63
6.04
3.9
4.52
2.52
4.09
2.64
3.06
1.71
1.65
1.99
4.17
5.65
1.62
1.95
4.11
5.51
0.17
0.25
0.21
0.37
3.67
2.49
2.94
1.71
5.68
3.86
4.55
2.64
3.85
2.61
3.08
1.79
2.06
2.54
4.96
6.55
2.03
2.49
4.89
6.39
0.17
0.27
0.22
0.38
3.76
2.35
2.8
1.67
5.82
3.64
4.34
2.58
3.94
2.47
2.94
1.75
2.51
3.19
5.78
7.75
2.47
3.12
5.69
7.56
0.17
0.27
0.23
0.38
3.74
2.36
2.76
1.67
5.79
3.65
4.27
2.59
3.92
2.47
2.89
1.75
3.1
3.89
6.69
9.05
3.05
3.8
6.59
8.83
0.17
0.27
0.24
0.37
3.64
2.35
2.65
1.69
5.64
3.64
4.11
2.61
3.82
2.46
2.78
1.77
3.7
4.65
8.3
11.5
3.64
4.54
8.19
11.2
0.18
0.28
0.23
0.38
3.56
2.25
2.73
1.67
5.52
3.49
4.22
2.58
3.73
2.36
2.86
1.75
4.34
6.07
10
13.2
0.18
0.28
0.22
0.37
3.44
2.24
2.85
1.71
5.33
3.47
4.4
2.65
3.61
2.35
2.98
1.79
5.15
7.1
11.8
15.8
5.07
6.94
11.7
15.4
(approx.)
B-83
Adapters
(for self-aligning ball bearings)
B2
ra
S1
B1
d1 d2
db da
Da
d 1750mm
Boundary dimensions
Bearing numbers
mm
Mass
mm
db
S1
Da
ras
min
max
min
max
max
(approx.)
d1
B1
d2
17
24
28
28
31
32
32
32
32
7
7
7
7
1204K;H 204
2204K;H 304
1304K;H 304
2304K;H2304
23
24
24
24
27
28
31
28
5
5
8
5
41
41
45
45
1
1
1
1
0.041
0.045
0.045
0.049
20
26
29
29
35
38
38
38
38
8
8
8
8
1205K;H 205X
2205K;H 305X
1305K;H 305X
2305K;H2305X
28
29
29
29
33
33
37
34
5
5
6
5
46
46
55
55
1
1
1
1
0.07
0.075
0.075
0.087
25
27
31
31
38
45
45
45
45
8
8
8
8
1206K;H 206X
2206K;H 306X
1306K;H 306X
2306K;H2306X
33
34
34
35
39
39
44
40
5
5
6
5
56
56
65
65
1
1
1
1
0.099
0.109
0.109
0.126
30
29
35
35
43
52
52
52
52
9
9
9
9
1207K;H 207X
2207K;H 307X
1307K;H 307X
2307K;H2307X
38
39
39
40
46
45
50
46
5
5
7
5
65
65
71.5
71.5
1
1
1.5
1.5
0.125
0.142
0.142
0.165
35
31
36
36
46
58
58
58
58
10
10
10
10
1208K;H 208X
2208K;H 308X
1308K;H 308X
2308K;H2308X
44
44
44
45
52
50
56
52
5
5
5
5
73
73
81.5
81.5
1
1
1.5
1.5
0.174
0.189
0.189
0.224
40
33
39
39
50
65
65
65
65
11
11
11
11
1209K;H 209X
2209K;H 309X
1309K;H 309X
2309K;H2309X
49
49
49
50
57
57
61
58
5
8
5
5
78
78
91.5
91.5
1
1
1.5
1.5
0.227
0.248
0.248
0.28
45
35
42
42
55
70
70
70
70
12
12
12
12
1210K;H 210X
2210K;H 310X
1310K;H 310X
2310K;H2310X
53
54
54
56
62
63
67
65
5
10
5
5
1
1
2
2
0.274
0.303
0.303
0.362
37
75
12
1211K;H 211X
60
70
1.5
0.308
50
B2
kg
da
83
83
100
100
91.5
1 Refers to adapter mass.

Note: 1. For bearing dimensions, basic rated loads, allowable rotations, and mass, refer to pages B-80 to B-82.
2. Adapters for series 12 bearings can also be used with H2 and H3 series bearings.
Caution: the B1 dimension of H3 series bearings is longer than that of H2 series bearings.
3. Adapter numbers which are appended with the code "X" indicate narrow slit type adapters which use washer with straight inner tabs.
4. For adapter locknut and washer dimensions, please refer to pages D-2 to D-7, and D-12 to D-14.
B-84
Adapters
B2
ra
S1
B1
d1 d2
db da
Da
d 5085mm
Boundary dimensions
Bearing numbers
mm
Mass
mm
kg
da
db
S1
Da
ras
min
max
min
max
max
(approx.)
d1
B1
d2
B2
50
45
45
59
75
75
75
12
12
12
2211K;H 311X
1311K;H 311X
2311K;H2311X
60
60
61
69
73
71
11
6
6
91.5
110
110
1.5
2
2
0.345
0.345
0.42
55
38
47
47
62
80
80
80
80
13
13
13
13
1212K;H 212X
2212K;H 312X
1312K;H 312X
2312K;H2312X
64
65
65
66
76
75
79
77
5
9
5
5
101.5
101.5
118
118
1.5
1.5
2
2
0.346
0.394
0.394
0.481
60
40
50
50
65
85
85
85
85
14
14
14
14
1213K;H 213X
2213K;H 313X
1313K;H 313X
2313K;H2313X
70
70
70
72
83
81
85
84
5
8
5
5
111.5
111.5
128
128
1.5
1.5
2
2
0.401
0.458
0.458
0.557
65
43
55
55
73
98
98
98
98
15
15
15
15
1215K;H 215X
2215K;H 315X
1315K;H 315X
2315K;H2315X
80
80
80
82
93
93
97
96
5
12
5
5
121.5
121.5
148
148
1.5
1.5
2
2
0.707
0.831
0.831
1.05
70
46
59
59
78
105
105
105
105
17
17
17
17
1216K;H 216X
2216K;H 316X
1316K;H 316X
2316K;H2316X
85
86
86
87
100
98
103
103
5
12
5
5
130
130
158
158
2
2
2
2
0.882
1.03
1.03
1.28
75
50
63
63
82
110
110
110
110
18
18
18
18
1217K;H 217X
2217K;H 317X
1317K;H 317X
2317K;H2317X
90
91
91
94
106
104
110
110
6
12
6
6
140
140
166
166
2
2
2.5
2.5
1.02
1.18
1.18
1.45
80
52
65
65
86
120
120
120
120
18
18
18
18
1218K;H 218X
2218K;H 318X
1318K;H 318X
2318K;H2318X
95
96
96
99
111
112
116
117
6
10
6
6
150
150
176
176
2
2
2.5
2.5
1.19
1.37
1.37
1.69
85
55
68
125
125
19
19
1219K;H 219X
2219K;H 319X
101
102
118
117
7
9
158
158
2
2
1.37
1.56

B-85
Adapters
B2
ra
S1
B1
d1 d2
db da
Da
d 85100mm
Boundary dimensions
Bearing numbers
mm
Mass
mm
kg
da
db
S1
Da
ras
min
max
min
max
max
(approx.)
d1
B1
d2
B2
85
68
90
125
125
19
19
1319K;H 319X
2319K;H2319X
102
105
123
123
7
7
186
186
2.5
2.5
1.56
1.92
90
58
71
71
97
130
130
130
130
20
20
20
20
1220K;H 220X
2220K;H 320X
1320K;H 320X
2320K;H2320X
106
107
107
110
125
123
130
129
7
8
7
7
168
168
201
201
2
2
2.5
2.5
1.49
1.69
1.69
2.15
100
63
77
77
105
145
145
145
145
21
21
21
21
1222K;H 222X
2222K;H 322X
1322K;H 322X
2322K;H2322X
116
117
117
121
138
137
150
142
7
6
9
7
188
188
226
226
2
2
2.5
2.5
1.93
2.18
2.18
2.74

B-86
Adapters
B-87
E Type cylindrical roller bearing
Double row cylindrical roller bearing
Four row cylindrical roller bearing
1. Types, design features, and

characteristics
dimensions are identical to standard type. HT type has a
large axial load capacity, and HL type provides extended
wear life in conditions where the development of a lubricating
film inside the bearing is difficult.
Double and multiple row bearing arrangements are also
available.
For extremely heavy load applications, the non-separable
full complement SL type bearing offers special advantages.
Table 1 shows the various types and characteristics of
single row cylindrical roller bearings. Table 2 shows the
characteristics of non-standard type cylindrical roller
bearings.
Since the rolling elements in cylindrical roller bearings

make line contact with raceways, these bearings can
accommodate heavy radial loads. The rollers are guided by
ribs on either the inner or outer ring, therefore these bearings
are also suitable for high speed applications. Furthermore,
cylindrical roller bearings are separable, and relatively easy
to install and disassemble even when interference fits are
required.
Among the various types of cylindrical roller bearings,
Type E has a high load capacity and its boundary
Table 1 Cylindrical roller bearing types and characteristics

Type code
NU type
Design
Characteristics
NU type
NU type outer rings have double ribs; outer ring and roller as well as cage can be separated
from inner ring. N type inner ring have double ribs; inner ring and roller as well as cage can
be separated from outer ring.
Unable to accommodate even the slightest axial loads.
This type is extremely suitable for, and widely used as, the floating side bearing.
N type
N type
NJ type
NJ type
NF type
NJ type has double ribs on outer ring, single rib on inner ring; NF type has single rib on outer
ring, and double rib on inner ring.
Can receive single direction axial loads.
When there is no distinction between the fixed side and floating side bearing, can be used as
a pair in close proximity.
NF type
NUP type
NUP type
NH type
(NJ + HJ)
NUP type has a collar ring attached to the ribless side of the inner ring; NH type is NJ type
with an L type collar ring attached. All of these collar rings are separable, and therefore it is
necessary to fix the inner ring axially.
Can accommodate axial loads in either direction.
Widely used as the shaft's fixed-side bearing.
NH type
B-89
Table 2 Non-standard type cylindrical roller bearing characteristics

Bearing type
Characteristics
Boundary dimensions identical to standard type; load capacity can be increased by increasing roller
diameter, roller length, or roller number.
Identified by addition of "E" to end of basic roller number.
Enables compact design due to its high load rating.
Rollers' inscribed circle diameter differs from standard type rollers and therefore cannot be interchanged.
E Type cylindrical
roller bearing
180mm
100mm
NU2220E
E type Standard type
215mm
NU320
Cr=335kN
Cr=315kN
E type bearing Standard type
bearing
120mm
NU224E
Cr=335kN
E type bearing
Remarks: In the dimension tables, both E type and standard type are listed, but in the future JIS will change to E type.
Large axial load use

cylindrical roller bearings
(HT type)
Double row cylindrical

roller bearings
Four row cylindrical

roller bearings
SL type cylindrical
roller bearings
Can accommodate larger axial loads than standard type thanks to improved geometry of the rib roller
end surface.
Please consult NTN Engineering concerning the many factors which require consideration, such as
load, lubricant, and installation conditions.
NN type and NNU type available.

Widely used for applications requiring thin-walled bearings, such the main shafts of machine tools,
rolling machine rollers, and in printing equipment.
Used mainly in the necks of rolling machine rollers; designed for maximum rated load to accommodate
the severely limited space in the roller neck section of such equipment.
Many varieties exist, including sealed types, which have been specially designed for high speed use, to
prevent creeping, provide dust and water proofing properties, etc. Contact NTN Engineering.
Full complement roller bearing capable of handling heavy loads.

Consult NTN Engineering regarding special application designs for SL type cylindrical roller bearings.
B-90
3. Allowable misalignment
Table 3 shows the standard varieties for cylindrical roller

bearings.
The basic rated loads listed in the dimension charts
correspond to values achieved with the standard cages listed
in Table 3. Furthermore, please note that even for the
identical bearing, in cases where the number of rolling
elements or the cage type differs, the basic rated load will
also differ from the values listed in the dimension charts.
Although values vary somewhat depending on bearing

type and internal specifications, under general load
conditions, to avoid the occurrence of edge loading,
allowable misalignments have been set as follows:
Bearing width series 0 or 1: 0.001 rad (3.5')
Bearing width series 2: 0.0005 rad (1.5')
Double row cylindrical roller bearings 1 : 0.0005 rad (1.5')
1 Does not include high precision bearings for machine tool
main shaft applications.
Table 3 Standard cage types

Bearing
series
Molded resin
cage
Pressed cage
Machined cage
NU10
100510/500
NU 2
NU2E
204E218E
208230
232264
219E240E
NU22
NU22E
2204E2218E
22082230
22322264
2219E2240E
NU3
NU3E
304E314E
308324
326356
315E332E
NU23
NU23E
2304E2311E
23082320
23222356
2312E2332E
NU4
405416
Note: 1) Within the same bearing series, cage type is identical even
if the type code (NJ, NUP, N, NF) differs.
2) For high speed and other special applications, machined
cages can be manufactured when necessary.
Consult NTN Engineering.
3) Among E type bearings (those using molded resin
cages), certain varieties may also use pressed cages.
Consult NTN Engineering.
4) Although machined cages are standard for two row and four
row cylindrical roller bearings, molded resin cages may also
be used in some of these bearings for machine tool
applications.
5) Due to their material properties, molded resin cages
cannot be used in applications where temperatures
exceed 120.
B-91
B
r
r1
r
r1
d FW
r1
r1
Type NJ
r1
Type NU
D EW
Type NUP
d J
Type N
Type NF
d 2035mm
Boundary dimensions
mm
kN
2
NU204E
NU2204E
NU304E
NU2304E
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
N
N
N
N
1,540
2,990
3,550
4,250
5,800
4,750
1,430
2,830
3,550
3,800
5,700
4,050
16,000
13,000
11,000
11,000
9,700
8,500
19,000
15,000
13,000
13,000
11,000
10,000
NU1005
NU205E
NU2205E
NU305E
NU2305E
NU405
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
N
N
N
N
N
N
19.6
37.5
50.0
50.0
77.5
55.0
2,000
4,000
5,000
5,400
7,600
6,400
2,000
3,800
5,100
5,100
7,900
5,600
14,000
11,000
9,700
9,300
8,300
7,300
16,000
13,000
11,000
11,000
9,700
8,500
NU1006
NU206E
NU2206E
NU306E
NU2306E
NU406
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
N
N
N
N
N
N
22.6
50.5
61.5
71.0
99.0
75.5
23.2
50.0
65.5
71.0
109
69.0
2,310
5,150
6,300
7,200
10,100
7,700
2,360
5,100
6,650
7,200
11,100
7,050
12,000
9,500
8,500
8,100
7,200
6,400
15,000
11,000
10,000
9,600
8,500
7,500
NU1007
NU207E
NU2207E
NU307E
NU2307E
NU407
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
N
N
N
N
N
N
27.3
43.5
55.5
58.0
72.5
58.5
83.0
82.5
114
95.5
29.0
43.0
55.5
62.0
77.5
57.0
81.5
88.0
122
89.0
2,780
4,450
5,700
5,950
7,400
6,000
8,500
8,400
11,600
9,750
2,950
4,350
5,650
6,300
7,900
5,800
8,300
8,950
12,500
9,100
11,000
9,400
8,500
8,500
7,600
8,000
7,200
7,000
6,400
5,700
13,000
11,000
10,000
10,000
8,900
9,400
8,500
8,200
7,500
6,700
NU1008
NU208
NU208E
NU2208
NU2208E
NU308
NU308E
NU2308
NU2308E
NU408
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
N
N
25.7
30.5
31.5
42.0
22.6
28.3
26.9
39.0
2,620
3,100
3,200
4,300
12
15
18
17
24
21
0.6
1
1
1.1
1.1
1.5
0.3
0.6
0.6
1.1
1.1
1.5
15.1
29.3
35.0
41.5
57.0
46.5
14.1
27.7
34.5
37.5
56.0
40.0
30
55
62
62
72
72
90
13
16
20
19
27
23
1
1
1
1.1
1.1
1.5
0.6
0.6
0.6
1.1
1.1
1.5
19.7
39.0
49.0
53.0
74.5
62.5
35
62
72
72
80
80
100
14
17
23
21
31
25
1
1.1
1.1
1.5
1.5
1.5
0.6
0.6
0.6
1.1
1.1
1.5
40
68
80
80
80
80
90
90
90
90
110
15
18
18
23
23
23
23
33
33
27
1
1.1
1.1
1.1
1.1
1.5
1.5
1.5
1.5
2
0.6
1.1
1.1
1.1
1.1
1.5
1.5
1.5
1.5
2
20
25
47
52
52
62
62
80
type type
NUP
N
18,000
16,000
15,000
14,000
0.6
0.6
0.6
0.6
14
18
15
21
type
NJ
15,000
14,000
13,000
12,000
1
1
1.1
1.1
47
47
52
52
type
NU
2,310
2,890
2,740
3,950
Cr
rs min
rpm
oil
Cor
Bearing numbers
static
grease
Cr
Limiting speeds
kgf
r1s min
Basic load ratings

dynamic
static
dynamic
Cor
B-92
ra
r 1a
r 1a
ra
da
Da dc
dd
de
dc
db Db
Db

dynamic
PrFr
static
PorFr
Dimensions
mm
type
NF
Fw
Ew
Mass
mm
J
da
db
dc
dd
de
Da
min
min
max
min
min
max
Db
max
min
ras
r1as
max
max
kg
type NU
type N
(approx.)
26.5
26.5
27.5
27.5
29.5
29.5
31.1
31.1
24
24
24
24
26
26
27
27
29
29
30
30
32
32
33
33
42
42
45.5
45.5
1
1
1
1
0.6
0.6
0.6
0.6
0.122
0.158
0.176
0.242
NF
30.5
31.5
31.5
34
34
38.8
41.5
62.8
32.7
34.5
34.5
38
38
43.6
27
29
29
31.5
31.5
33
29
33
30
31
31
33
33
38
32
34
34
37
37
41
33
37
37
40
40
46
43
47
47
55.5
55.5
72
45
72
42.5
64
0.6
1
1
1
1
1.5
0.3
0.6
0.6
1
1
1.5
0.092
0.151
0.186
0.275
0.386
0.55
0.091
0.536
NF
36.5
37.5
37.5
40.5
40.5
45
48.5
73
38.9
41.1
41.1
44.9
44.9
50.5
34
34
34
36.5
36.5
38
35
38
35
37
37
40
40
44
38
40
40
44
44
47
39.5
44
44
48
48
52
50
57
57
65.5
65.5
82
51
82
49.5
74
1
1
1
1
1
1.5
0.6
0.6
0.6
1
1
1.5
0.13
0.226
0.297
0.398
0.58
0.751
0.128
0.732
NF
42
44
44
46.2
46.2
53
55
83
44.6
48
48
51
51
59
39
39
39
41.5
41.5
43
40
43
41
43
43
45
45
52
44
46
46
48
48
55
45
50
50
53
53
61
57
65.5
65.5
72
72
92
58
92
56
84
1
1
1
1.5
1.5
1.5
0.6
0.6
0.6
1
1
1.5
0.179
0.327
0.455
0.545
0.78
0.99
0.176
0.965
NF
NF
NF
47
50
49.5
50
49.5
53.5
52
53.5
52
58
61
70
70
77.5
77.5
92
49.8
54.2
53.9
54.2
53.9
58.4
57.6
58.4
57.6
64.8
44
46.5
46.5
46.5
46.5
48
48
48
48
49
45
46.5
46.5
48
48
49
46
49
49
49
49
51
51
51
51
57
49
52
52
52
52
55
55
55
55
60
50.5
56
56
56
56
60
60
60
60
67
63
73.5
73.5
73.5
73.5
82
82
82
82
101
64
73.5
73.5
82
82
101
62
72
72
80
80
93
1
1
1
1
1
1.5
1.5
1.5
1.5
2
0.6
1
1
1
1
1.5
1.5
1.5
1.5
2
0.22
0.378
0.426
0.49
0.552
0.658
0.754
0.951
1.06
1.3
0.217
0.37
0.48
0.643
0.932
1.27
4 Does not apply to side of the outer ring rib of type NF bearings.
B-93
B
r
r1
r
r1
d FW
r1
r1
Type NJ
r1
Type NU
D EW
Type NUP
d J
Type N
Type NF
d 3555mm
Boundary dimensions
mm
kN
2
Basic load ratings

dynamic
static
dynamic
2
Limiting speeds
Bearing numbers
static
kgf
rpm
type
NU
type
NJ
type type
NUP
N
r1s min
Cr
Cor
Cr
Cor
grease
oil
1
1.1
1.1
1.1
1.1
1.5
1.5
1.5
1.5
2
0.6
1.1
1.1
1.1
1.1
1.5
1.5
1.5
1.5
2
31.0
46.0
63.0
61.5
76.0
74.0
97.5
99.0
137
107
34.0
47.0
66.5
68.0
84.5
71.0
98.5
104
153
102
3,200
4,700
6,450
6,250
7,750
7,550
9,950
10,100
14,000
10,900
3,450
4,800
6,800
6,900
8,600
7,250
10,000
10,600
15,600
10,400
9,900
8,400
7,600
7,600
6,800
7,200
6,500
6,300
5,700
5,100
12,000
9,900
9,000
9,000
8,000
8,400
7,600
7,400
6,800
6,000
NU1009
NU209
NU209E
NU2209
NU2209E
NU309
NU309E
NU2309
NU2309E
NU409
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
N
N
16
20
20
23
23
27
27
40
40
31
1
1.1
1.1
1.1
1.1
2
2
2
2
2.1
0.6
1.1
1.1
1.1
1.1
2
2
2
2
2.1
32.0
48.0
66.0
64.0
79.5
87.0
110
121
163
129
36.0
51.0
72.0
73.5
91.5
86.0
113
131
187
124
3,300
4,900
6,750
6,550
8,100
8,850
11,200
12,300
16,600
13,200
3,700
5,200
7,350
7,500
9,350
8,800
11,500
13,400
19,000
12,600
8,900
7,600
6,900
6,900
6,200
6,500
5,900
5,700
5,200
4,700
11,000
9,000
8,100
8,100
7,300
7,700
6,900
6,700
6,100
5,500
NU1010
NU210
NU210E
NU2210
NU2210E
NU310
NU310E
NU2310
NU2310E
NU410
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
N
N
55
90
100
100
100
100
120
120
120
120
140
18
21
21
25
25
29
29
43
43
33
1.1
1.5
1.5
1.5
1.5
2
2
2
2
2.1
1
1.1
1.1
1.1
1.1
2
2
2
2
2.1
37.5
58.0
82.5
75.5
97.0
111
137
148
201
139
44.0
62.5
93.0
87.0
114
111
143
162
233
138
3,850
5,900
8,400
7,700
9,900
11,300
14,000
15,100
20,500
14,200
4,450
6,350
9,500
8,900
11,700
11,400
14,600
16,500
23,800
14,100
8,200
6,900
6,300
6,300
5,600
5,900
5,300
5,200
4,700
4,300
9,700
8,200
7,400
7,400
6,600
7,000
6,300
6,100
5,600
5,000
NU1011
NU211
NU211E
NU2211
NU2211E
NU311
NU311E
NU2311
NU2311E
NU411
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
N
N
60
95
110
110
110
18
22
22
28
1.1
1.5
1.5
1.5
1
1.5
1.5
1.5
40.0
68.5
97.5
96.0
48.5
75.0
107
116
4,100
7,000
9,950
9,800
4,950
7,650
10,900
11,800
7,500
6,400
5,800
5,800
8,800
7,600
6,800
6,800
NU1012
NU212
NU212E
NU2212
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
N
N
45
75
85
85
85
85
100
100
100
100
120
16
19
19
23
23
25
25
36
36
29
50
80
90
90
90
90
110
110
110
110
130
rs min
B-94
ra
r 1a
r 1a
ra
da
Da dc
dd
de
dc
db Db
Db

dynamic
PrFr
static
PorFr
Dimensions
mm
type
NF
Fw
Ew
Mass
mm
J
da
db
dc
dd
de
Da
min
min
max
min
min
max
Db
max
min
ras
r1as
max
max
kg
type NU
type N
(approx.)
NF
NF
NF
52.5
55
54.5
55
54.5
58.5
58.5
58.5
58.5
64.5
67.5
75
75
86.5
86.5
100.5
55.5
59
58.9
59
58.9
64
64.5
64
64.5
71.8
49
51.5
51.5
51.5
51.5
53
53
53
53
54
50
51.5
51.5
53
53
54
52
54
54
54
54
57
57
57
57
63
54
57
57
57
57
60
60
60
60
66
56
61
61
61
61
66
66
66
66
74
70
78.5
78.5
78.5
78.5
92
92
92
92
111
71
68.5
78.5 77
78.5 77
92
89
92
89
111
102
1
1
1
1
1
1.5
1.5
1.5
1.5
2
0.6
1
1
1
1
1.5
1.5
1.5
1.5
2
0.28
0.432
0.495
0.53
0.6
0.877
0.996
1.27
1.41
1.62
0.276
0.423
0.52
0.857
1.24
1.58
NF
NF
NF
57.5
60.4
59.5
60.4
59.5
65
65
65
65
70.8
72.5
80.4
80.4
95
95
110.8
60.5
64.6
63.9
64.6
63.9
71
71.4
71
71.4
78.8
54
56.5
56.5
56.5
56.5
59
59
59
59
61
55
56.5
56.5
59
59
61
57
58
58
58
58
63
63
63
63
69
59
62
62
62
62
67
67
67
67
73
61
67
67
67
67
73
73
73
73
81
75
83.5
83.5
83.5
83.5
101
101
101
101
119
76
73.5
83.5 83
83.5 83
101
98
101
98
119
112
1
1
1
1
1
2
2
2
2
2
0.6
1
1
1
1
2
2
2
2
2
0.295
0.47
0.54
0.571
0.652
1.14
1.3
1.7
1.9
2.02
0.291
0.46
0.56
1.11
1.67
1.97
NF
NF
NF
64.5
66.5
66
66.5
66
70.5
70.5
70.5
70.5
77.2
80.5
88.5
88.5
104.5
104.5
117.2
67.7
70.8
70.8
70.8
70.8
77.2
77.7
77.2
77.7
85.2
60
61.5
61.5
61.5
61.5
64
64
64
64
66
61.5
63
63
64
64
66
63
65
65
65
65
69
69
69
69
76
66
68
68
68
68
72
72
72
72
79
68.5
73
73
73
73
80
80
80
80
87
83.5
92
92
92
92
111
111
111
111
129
85
81.5
93.5 91
93.5 91
111
107
111
107
129
119
1
1.5
1.5
1.5
1.5
2
2
2
2
2
1
1
1
1
1
2
2
2
2
2
0.442
0.638
0.718
0.773
0.968
1.45
1.65
2.17
2.37
2.48
0.435
0.626
0.758
1.42
2.13
2.42
NF
69.5
73.5
72
73.5
85.5
97.5
97.5
72.7
78.4
77.6
78.4
65
68
68
68
66.5
68
68
68
71
71
71
71
75
75
75
73.5
80
80
80
88.5
102
102
102
90
102
102
1
1.5
1.5
1.5
1
1.5
1.5
1.5
0.474
0.818
0.923
1.06
0.467
0.802
1.04
B-95
86.5
100
100
B
r
r1
r
r1
d FW
r1
r1
Type NJ
r1
Type NU
D EW
Type NUP
d J
Type N
Type NF
d 5570mm
Boundary dimensions
mm
B
kN
rs min
Basic load ratings

dynamic
static
dynamic
2
Limiting speeds
Bearing numbers
static
kgf
rpm
type
NU
type
NJ
type type
NUP
N
Cr
Cor
grease
oil
157
126
157
188
262
168
13,400
12,600
15,200
17,200
22,700
17,100
16,000
12,900
16,000
19,200
26,700
17,200
5,200
5,500
4,900
4,800
4,400
3,900
6,100
6,500
5,800
5,700
5,200
4,600
NU2212E
NU312
NU312E
NU2312
NU2312E
NU412
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
41.0
84.0
108
120
149
135
181
188
248
182
51.0
94.5
119
149
181
139
191
212
287
186
4,200
8,550
11,000
12,200
15,200
13,800
18,400
19,100
25,200
18,600
5,200
9,650
12,100
15,200
18,400
14,200
19,500
21,700
29,300
19,000
7,000
5,900
5,400
5,400
4,800
5,100
4,600
4,400
4,100
3,600
8,200
7,000
6,300
6,300
5,600
6,000
5,400
5,200
4,800
4,300
NU1013
NU213
NU213E
NU2213
NU2213E
NU313
NU313E
NU2313
NU2313E
NU413
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
N
N
1
1.5
1.5
1.5
1.5
2.1
2.1
2.1
2.1
3
58.5
83.5
119
119
156
158
205
223
274
228
70.5
95.0
137
151
194
168
222
262
325
236
5,950
8,500
12,100
12,200
15,900
16,100
20,900
22,700
27,900
23,200
7,200
9,700
14,000
15,400
19,800
17,200
22,600
26,700
33,000
24,000
6,500
5,500
5,000
5,000
4,500
4,700
4,200
4,100
3,800
3,400
7,600
6,500
5,900
5,900
5,200
5,500
5,000
4,800
4,400
4,000
NU1014
NU214
NU214E
NU2214
NU2214E
NU314
NU314E
NU2314
NU2314E
NU414
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
N
N
1
1.5
1.5
1.5
1.5
2.1
2.1
2.1
60.0
96.5
130
130
162
190
240
258
74.5
111
156
162
207
205
263
300
6,100
9,850
13,300
13,200
16,500
19,400
24,500
26,300
7,600
11,300
16,000
16,500
21,100
20,900
26,800
31,000
6,100
5,100
4,700
4,700
4,200
4,400
4,000
3,800
7,100
6,000
5,500
5,500
4,900
5,200
4,700
4,500
NU1015
NU215
NU215E
NU2215
NU2215E
NU315
NU315E
NU2315
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
N
N
r1s min
Cr
60
110
130
130
130
130
150
28
31
31
46
46
35
1.5
2.1
2.1
2.1
2.1
2.1
1.5
2.1
2.1
2.1
2.1
2.1
131
124
150
169
222
167
65
100
120
120
120
120
140
140
140
140
160
18
23
23
31
31
33
33
48
48
37
1.1
1.5
1.5
1.5
1.5
2.1
2.1
2.1
2.1
2.1
1
1.5
1.5
1.5
1.5
2.1
2.1
2.1
2.1
2.1
70
110
125
125
125
125
150
150
150
150
180
20
24
24
31
31
35
35
51
51
42
1.1
1.5
1.5
1.5
1.5
2.1
2.1
2.1
2.1
3
75
115
130
130
130
130
160
160
160
20
25
25
31
31
37
37
55
1.1
1.5
1.5
1.5
1.5
2.1
2.1
2.1
Cor
B-96
ra
r 1a
r 1a
ra
da
Da dc
dd
de
dc
db Db
Db

dynamic
PrFr
static
PorFr
Dimensions
mm
type
NF
Fw
Ew
Mass
mm
J
Db
dc
dd
de
Da
min
min
max
min
min
max
102
119
119
119
119
139
119
119
139
116
116
128
1.5
2
2
2
2
2
1.5
2
2
2
2
2
1.21
1.8
2.05
2.71
2.96
3
1.76
2.66
2.93
min
r1as
max
max
type N
db
max
ras
kg
type NU
da
(approx.)
NF
NF
72
77
77
77
77
83
113
113
127
77.6
84.2
84.6
84.2
84.6
91.8
68
71
71
71
71
71
71
71
71
71
75
75
75
75
82
75
79
79
79
79
85
80
86
86
86
86
94
NF
NF
NF
74.5
79.6
78.5
79.6
78.5
83.5
82.5
83.5
82.5
89.3
90.5
105.6
105.6
121.5
121.5
135.3
77.7
84.8
84.5
84.8
84.5
91
91
91
91
98.5
70
73
73
73
73
76
76
76
76
76
71.5
73
73
76
76
76
73
77
77
77
77
81
81
81
81
88
76
81
81
81
81
85
85
85
85
91
78.5
87
87
87
87
93
93
93
93
100
93.5
112
112
112
112
129
129
129
129
149
95
112
112
129
129
149
91.5
108
108
125
125
137
1
1.5
1.5
1.5
1.5
2
2
2
2
2
1
1.5
1.5
1.5
1.5
2
2
2
2
2
0.485
1.02
1.21
1.4
1.6
2.23
2.54
3.27
3.48
3.6
0.477
1
1.37
2.18
3.2
3.5
NF
NF
NF
80
84.5
83.5
84.5
83.5
90
89
90
89
100
100
110.5
110.5
130
130
152
84
89.6
89.5
89.6
89.5
98
98
98
98
110.5
75
78
78
78
78
81
81
81
81
83
76.5
78
78
81
81
83
78
82
82
82
82
87
87
87
87
99
82
86
86
86
86
92
92
92
92
102
85
92
92
92
92
100
100
100
100
112
103.5
117
117
117
117
139
139
139
139
167
105
117
117
139
139
167
101
114
114
134
134
153
1
1.5
1.5
1.5
1.5
2
2
2
2
2.5
1
1.5
1.5
1.5
1.5
2
2
2
2
2.5
0.699
1.12
1.3
1.47
1.7
2.71
3.1
3.98
4.25
5.24
0.689
1.1
1.44
2.65
3.9
5.1
NF
NF
85
88.5
88.5
88.5
88.5
95.5
95
95.5
105
116.5
116.5
139.5
139.5
89
94
94.5
94
94.5
104.2
104.6
104.2
80
83
83
83
83
86
86
86
81.5
83
83
86
86
83
87
87
87
87
93
93
93
87
90
90
90
90
97
97
97
90
96
96
96
96
106
106
106
108.5
122
122
122
122
149
149
149
110
122
122
149
149
106
120
120
143
143
1
1.5
1.5
1.5
1.5
2
2
2
1
1.5
1.5
1.5
1.5
2
2
2
0.738
1.23
1.41
1.55
1.79
3.28
3.74
4.87
0.727
1.21
1.52
3.21
4.77
B-97
B
r
r1
r
r1
d FW
r1
r1
Type NJ
r1
Type NU
D EW
Type NUP
d J
Type N
Type NF
d 7090mm
Boundary dimensions
mm
B
kN
2
Basic load ratings

dynamic
static
dynamic
2
Limiting speeds
Bearing numbers
static
kgf
rpm
type
NU
type
NJ
type type
NUP
N
Cr
Cor
grease
oil
395
274
33,500
26,800
40,000
27,900
3,500
3,200
4,100
3,700
NU2315E
NU415
NJ
NJ
NUP
NUP
72.5
106
139
147
186
190
256
274
355
299
90.5
122
167
186
243
207
282
330
430
315
7,400
10,800
14,200
15,000
19,000
19,400
26,100
27,900
36,500
30,500
9,250
12,500
17,000
19,000
24,800
21,100
28,800
34,000
44,000
32,000
5,700
4,800
4,400
4,400
3,900
4,100
3,700
3,600
3,300
3,000
6,700
5,700
5,100
5,100
4,600
4,800
4,400
4,200
3,900
3,500
NU1016
NU216
NU216E
NU2216
NU2216E
NU316
NU316E
NU2316
NU2316E
NU416
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
N
N
1
2
2
2
2
3
3
3
3
74.5
120
167
170
217
212
291
315
395
95.5
140
199
218
279
228
330
380
485
7,600
12,300
17,000
17,300
22,200
21,600
29,700
32,000
40,000
9,750
14,300
20,300
22,200
28,400
23,300
33,500
39,000
49,500
5,400
4,500
4,100
4,100
3,700
3,900
3,500
3,400
3,100
6,300
5,300
4,800
4,800
4,300
4,600
4,100
4,000
3,700
NU1017
NU217
NU217E
NU2217
NU2217E
NU317
NU317E
NU2317
NU2317E
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
N
N
1.5
2
2
2
2
3
3
3
3
1.1
2
2
2
2
3
3
3
3
88.0
152
182
197
242
240
315
325
435
114
178
217
248
315
265
355
395
535
9,000
15,500
18,500
20,100
24,700
24,500
32,000
33,500
44,500
11,700
18,100
22,200
25,300
32,000
27,100
36,000
40,000
54,500
5,100
4,300
3,900
3,900
3,500
3,700
3,300
3,200
2,900
5,900
5,000
4,600
4,600
4,100
4,300
3,900
3,800
3,400
NU1018
NU218
NU218E
NU2218
NU2218E
NU318
NU318E
NU2318
NU2318E
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
N
N
1.5
2.1
2.1
1.1
2.1
2.1
90.5
166
220
120
195
265
9,250
16,900
22,500
12,300
19,900
27,000
4,800
4,000
3,600
5,600
4,700
4,300
NU1019
NU219
NU219E
NJ
NJ
NJ
NUP
NUP
NUP
N
N
rs min
r1s min
Cr
75
160
190
55
45
2.1
3
2.1
3
330
262
80
125
140
140
140
140
170
170
170
170
200
22
26
26
33
33
39
39
58
58
48
1.1
2
2
2
2
2.1
2.1
2.1
2.1
3
1
2
2
2
2
2.1
2.1
2.1
2.1
3
85
130
150
150
150
150
180
180
180
180
22
28
28
36
36
41
41
60
60
1.1
2
2
2
2
3
3
3
3
90
140
160
160
160
160
190
190
190
190
24
30
30
40
40
43
43
64
64
95
145
170
170
24
32
32
Cor
B-98
Dimensions
mm
kgss
Mass
B
r
r1
r
r1
d FW
r1
r1
D EW
Type NJ
r1
Type NU
Type NUP
d J
Type N
Type NF
d 90110mm
Boundary dimensions
Basic load ratings

dynamic
static
dynamic
mm
B
kN
2
Limiting speeds
Bearing numbers
static
kgf
rpm
type
NU
type
NJ
type type
NUP
N
Cr
Cor
grease
oil
298
370
285
385
460
585
23,500
29,200
26,400
34,000
38,000
47,000
30,500
38,000
29,500
39,500
47,000
59,500
3,600
3,300
3,400
3,100
3,000
2,700
4,300
3,800
4,000
3,600
3,500
3,200
NU2219
NU2219E
NU319
NU319E
NU2319
NU2319E
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
93.0
183
249
258
335
299
380
410
570
126
217
305
340
445
335
425
505
715
9,500
18,600
25,400
26,300
34,000
30,500
38,500
42,000
58,000
12,800
22,200
31,000
34,500
45,500
34,500
43,500
51,500
73,000
4,600
3,800
3,500
3,500
3,100
3,300
2,900
2,900
2,600
5,400
4,500
4,100
4,100
3,600
3,800
3,500
3,400
3,100
NU1020
NU220
NU220E
NU2220
NU2220E
NU320
NU320E
NU2320
NU2320E
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
N
N
1.1
2.1
3
105
201
320
142
241
360
10,700
20,500
32,500
14,500
24,600
36,500
4,300
3,600
3,100
5,100
4,300
3,700
NU1021
NU221
NU321
NJ
NJ
NJ
NUP
NUP
NUP
N
N
N
2
2.1
2.1
2.1
2.1
3
3
3
3
1.1
2.1
2.1
2.1
2.1
3
3
3
3
131
240
293
320
385
360
450
605
675
174
290
365
415
515
400
525
790
880
13,400
24,500
29,800
32,500
39,000
36,500
46,000
61,500
69,000
17,700
29,500
37,000
42,000
52,500
41,000
53,500
80,500
89,500
4,100
3,400
3,100
3,100
2,800
3,000
2,700
2,600
2,400
4,800
4,000
3,700
3,700
3,300
3,500
3,100
3,100
2,800
NU1022
NU222
NU222E
NU2222
NU2222E
NU322
NU322E
NU2322
NU2322E
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
N
N
2
2.1
2.1
2.1
2.1
3
1.1
2.1
2.1
2.1
2.1
3
139
260
335
350
450
450
191
320
420
460
620
510
14,100
26,500
34,000
35,500
46,000
46,000
19,500
32,500
43,000
47,000
63,000
52,000
3,800
3,200
2,900
2,900
2,600
2,700
4,400
3,700
3,400
3,400
3,000
3,200
NU1024
NU224
NU224E
NU2224
NU2224E
NU324
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
N
N
rs min
r1s min
Cr
95
170
170
200
200
200
200
43
43
45
45
67
67
2.1
2.1
3
3
3
3
2.1
2.1
3
3
3
3
230
286
259
335
370
460
100
150
180
180
180
180
215
215
215
215
24
34
34
46
46
47
47
73
73
1.5
2.1
2.1
2.1
2.1
3
3
3
3
1.1
2.1
2.1
2.1
2.1
3
3
3
3
105
160
190
225
26
36
49
2
2.1
3
110
170
200
200
200
200
240
240
240
240
28
38
38
53
53
50
50
80
80
120
180
215
215
215
215
260
28
40
40
58
58
55
Cor
B-100
ra
r 1a
r 1a
ra
da
Da dc
dd
de
dc
db Db
Db

dynamic
PrFr
static
PorFr
Dimensions
mm
type
NF
Fw
NF
113.5
112.5
121.5
121.5
121.5
121.5
151.5
173.5
173.5
NF
NF
113
120
119
120
119
129.5
127.5
129.5
127.5
NF
NF
Mass
mm
dc
dd
de
Da
min
min
max
min
min
max
121
121
132
132.7
132
132.7
106
106
108
108
108
108
106
108
108
111
111
119
119
119
119
116
116
124
124
124
124
123
123
134
134
134
134
159
159
187
187
187
187
159
187
187
155
178
178
2
2
2.5
2.5
2.5
2.5
2
2
2.5
2.5
2.5
2.5
3.79
4.14
6.13
6.62
9.2
9.8
3.71
5.99
9.02
137
160
160
185.5
185.5
117.8
128
128
128
128
140.5
140.3
140.5
140.3
106.5
111
111
111
111
113
113
113
113
108
111
111
113
113
111
117
117
117
117
125
125
125
125
116
122
122
122
122
132
132
132
132
119
130
130
130
130
143
143
143
143
142
169
169
169
169
202
202
202
202
143.5
169
169
202
202
139
164
164
190
190
1.5
2
2
2
2
2.5
2.5
2.5
2.5
1
2
2
2
2
2.5
2.5
2.5
2.5
1.45
3.33
3.66
4.57
5.01
7.49
8.57
11.7
12.8
1.43
3.26
4.48
7.32
11.5
119.5
126.8
135
145.5
168.8
195
124.7
135
147
111.5
116
118
114
116
118
118
124
132
122
129
137
126
137
149
151
179
212
153.5 147.5
179
173
212
199
2
2
2.5
1
2
2.5
1.84
3.95
8.53
1.81
3.87
8.33
NF
NF
125
132.5
132.5
132.5
132.5
143
143
143
143
155
178.5
178.5
207
207
131
141.5
142.1
141.5
142.1
155.5
156.6
155.5
156.6
116.5
121
121
121
121
123
123
123
123
119
121
121
123
123
124
130
130
130
130
140
140
140
140
128
135
135
135
135
145
145
145
145
132
144
144
144
144
158
158
158
158
161
189
189
189
189
227
227
227
227
163.5
189
189
227
227
157
182
182
211
211
2
2
2
2
2
2.5
2.5
2.5
2.5
1
2
2
2
2
2.5
2.5
2.5
2.5
2.33
4.63
4.27
6.56
7.4
10
11.1
17.1
19.4
2.3
4.54
6.43
9.77
16.8
NF
NF
135
143.5
143.5
143.5
143.5
154
165
191.5
191.5
226
141
153
153.9
153
153.9
168.5
126.5
131
131
131
131
133
129
131
131
133
134
141
141
141
141
151
138
146
146
146
146
156
142
156
156
156
156
171
171
204
204
204
204
247
173.5
204
204
247
167
196
196
230
2
2
2
2
2
2.5
1
2
2
2
2
2.5
2.44
5.57
5.97
8.19
9.18
12.8
2.4
5.46
8.03
12.5
B-101
max
min
ras
r1as
max
max
type N
db
Ew
Db
kg
type NU
da
(approx.)
B
r
r1
r1
r
d FW
r1
Type NU
r
d J
Type NJ
Type NUP
d 120150mm
Boundary dimensions
Basic load ratings

dynamic
static
dynamic
mm
d
kN
rs min
r1s min
Cr
Limiting speeds
kgf
Cor
Cr
Bearing numbers
static
rpm
Cor
grease
oil
type
NU
type
NJ
type type
NUP
N
260
260
260
55
86
86
3
3
3
3
3
3
530
710
795
610
920
1,030
54,000
62,000
72,500
93,500
81,000 105,000
2,400
2,400
2,200
2,800
2,800
2,500
NU324E
NU2324
NU2324E
NJ
NJ
NJ
NUP
NUP
NUP
200
230
230
230
230
280
280
280
280
33
40
40
64
64
58
58
93
93
2
3
3
3
3
4
4
4
4
1.1
3
3
3
3
4
4
4
4
172
270
365
380
530
560
615
840
920
238
340
455
530
735
665
735
1,130
1,230
17,500
24,200
27,600
35,000
37,000
46,000
38,500
54,000
54,000
75,000
57,000
68,000
63,000
75,000
85,500 115,000
94,000 126,000
3,400
2,900
2,600
2,600
2,300
2,500
2,200
2,200
2,000
4,000
3,400
3,100
3,100
2,700
2,900
2,600
2,600
2,300
NU1026
NU226
NU226E
NU2226
NU2226E
NU326
NU326E
NU2326
NU2326E
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
N
N
210
250
250
250
250
300
300
300
300
33
42
42
68
68
62
62
102
102
2
3
3
3
3
4
4
4
4
1.1
3
3
3
3
4
4
4
4
176
310
395
445
575
615
665
920
1,020
250
400
515
635
835
745
795
1,250
1,380
17,900
25,500
31,500
40,500
40,000
52,500
45,500
64,500
58,500
85,000
63,000
76,000
67,500
81,500
94,000 127,000
104,000 141,000
3,200
2,700
2,400
2,400
2,100
2,300
2,100
2,000
1,800
3,800
3,100
2,800
2,800
2,500
2,700
2,400
2,300
2,100
NU1028
NU228
NU228E
NU2228
NU2228E
NU328
NU328E
NU2328
NU2328E
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
N
N
225
270
270
270
270
320
320
320
320
35
45
45
73
73
65
65
108
108
2.1
3
3
3
3
4
4
4
4
1.5
3
3
3
3
4
4
4
4
202
345
450
500
660
665
760
1,020
1,160
294
435
595
710
980
805
920
1,400
1,600
20,600
29,900
35,000
44,500
45,500
60,500
51,000
72,500
67,500 100,000
67,500
82,500
77,500
94,000
104,000 143,000
118,000 163,000
3,000
2,500
2,200
2,200
2,000
2,100
1,900
1,900
1,700
3,500
2,900
2,600
2,600
2,400
2,500
2,300
2,200
2,000
NU1030
NU230
NU230E
NU2230
NU2230E
NU330
NU330E
NU2330
NU2330E
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
NUP
N
N
240
290
290
38
48
48
2.1
3
3
1.5
3
3
238
430
500
340
570
665
2,800
2,300
2,100
3,300
2,700
2,400
NU1032
NU232
NU232E
NJ
NJ
NJ
NUP
NUP
NUP
N
N
24,200
43,500
51,000
35,000
58,000
68,000
B-102
ra
r1a
r1a
ra
da
Da dc
dd
de
dc
db Db
Db

dynamic
PrFr
static
PorFr
Dimensions
mm
type
NF
Fw
Ew
154
154
154
226
NF
NF
148
156
153.5
156
153.5
167
167
167
167
NF
NF
Mass
mm
dc
dd
de
Da
min
min
max
min
min
max
169.2
168.5
169.2
133
133
133
133
151
151
151
156
156
156
171
171
171
247
247
247
247
230
2.5
2.5
2.5
2.5
2.5
2.5
13.9
21.5
26.1
21.1
182
204
204
243
243
154.8
165.5
164.7
165.5
164.7
182
183
182
183
136.5
143
143
143
143
146
146
146
146
139
143
143
146
146
146
151
151
151
151
164
164
164
164
151
158
158
158
158
169
169
169
169
156
168
168
168
168
184
184
184
184
191
217
217
217
217
264
264
264
264
193.5
217
217
264
264
184
208
208
247
247
2
2.5
2.5
2.5
2.5
3
3
3
3
1
2.5
2.5
2.5
2.5
3
3
3
3
3.69
6.3
6.9
10.2
11.8
17.4
19.4
26.9
30.9
3.63
6.17
10
17
26.4
158
169
169
169
169
180
180
180
180
192
221
221
260
260
164.8
179.5
180.2
179.5
180.2
196
196.8
196
196.8
146.5
153
153
153
153
156
156
156
156
149
153
153
156
156
156
166
166
166
166
176
176
176
176
161
171
171
171
171
182
182
182
182
166
182
182
182
182
198
198
198
198
201
237
237
237
237
284
284
284
284
203.5
237
237
284
284
194
225
225
265
265
2
2.5
2.5
2.5
2.5
3
3
3
3
1
2.5
2.5
2.5
2.5
3
3
3
3
4.05
7.88
8.73
12.9
15.8
21.2
23.2
33.8
38.7
3.98
7.72
12.6
20.7
33.1
NF
NF
169.5
182
182
182
182
193
193
193
193
205.5
238
238
277
277
176.7
193
194
193
194
210
211
210
211
158
163
163
163
163
166
166
166
166
161
163
163
166
166
167
179
179
179
179
190
190
190
190
173
184
184
184
184
195
195
195
195
178
196
196
196
196
213
213
213
213
214
257
257
257
257
304
304
304
304
217
257
257
304
304
207.5
242
242
282
282
2
2.5
2.5
2.5
2.5
3
3
3
3
1.5
2.5
2.5
2.5
2.5
3
3
3
3
4.77
9.92
11
16.3
19.7
25.3
28.4
40.6
47.2
4.7
9.72
16
24.7
39.8
NF
180
195
195
220
255
188
207
207.8
168
173
173
171
173
178
192
192
184
197
197
189
210
210
229
277
277
232
277
222
259
2
2.5
2.5
1.5
2.5
2.5
5.9
13.7
15.6
5.81
13.4
B-103
max
min
ras
r1as
max
max
type N
db
Db
kg
type NU
da
(approx.)
B
r
r1
r
d FW
r1
r1
r1
Type NU
r
D EW
Type NJ
r1
d J
Type N
Type NUP
Type NF
d 160200mm
Boundary dimensions
mm
kN
2
Basic load ratings

dynamic
static
dynamic
2
Limiting speeds
Bearing numbers
static
kgf
rpm
type
NU
type
NJ
type type
NUP
N
Cor
grease
oil
64,500
82,500
71,000
87,500
109,000
134,000
96,000
121,000
89,500
107,000
155,000
186,000
2,100
1,900
2,000
1,800
1,700
1,600
2,400
2,200
2,300
2,100
2,000
1,900
NU2232
NU2232E
NU332
NU332E
NU2332
NU2332E
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
400
635
800
1,080
1,410
1,010
1,750
28,300
48,500
61,500
73,000
98,500
81,500
125,000
41,000
65,000
81,500
110,000
144,000
103,000
179,000
2,600
2,200
2,000
2,000
1,800
1,800
1,600
3,000
2,500
2,300
2,300
2,100
2,200
1,900
NU1034
NU234
NU234E
NU2234
NU2234E
NU334
NU2334
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
NUP
N
N
N
N
340
495
625
745
1,010
905
1,380
485
675
850
1,140
1,510
1,150
1,990
35,000
50,500
64,000
76,000
103,000
92,000
141,000
49,500
69,000
87,000
117,000
154,000
118,000
203,000
2,400
2,000
1,800
1,800
1,600
1,700
1,500
2,900
2,400
2,200
2,200
1,900
2,000
1,800
NU1036
NU236
NU236E
NU2236
NU2236E
NU336
NU2336
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
NUP
N
N
N
N
2.1
4
4
4
4
5
5
350
555
695
830
1,100
975
1,520
510
770
955
1,290
1,670
1,260
2,220
36,000
56,500
71,000
84,500
113,000
99,500
155,000
52,000
78,500
97,500
131,000
170,000
129,000
226,000
2,300
1,900
1,700
1,700
1,500
1,600
1,400
2,700
2,200
2,000
2,000
1,800
1,900
1,700
NU1038
NU238
NU238E
NU2238
NU2238E
NU338
NU2338
NJ
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
NUP
N
N
N
N
2.1
4
4
4
4
5
390
620
765
925
1,220
975
580
865
1,060
1,440
1,870
1,270
40,000
63,500
78,000
94,000
125,000
99,500
59,500
88,500
108,000
147,000
191,000
130,000
2,200
1,800
1,600
1,600
1,500
1,500
2,600
2,100
1,900
1,900
1,700
1,800
NU1040
NU240
NU240E
NU2240
NU2240E
NU340
NJ
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
NUP
N
N
r1s min
Cr
Cor
rs min
160
290
290
340
340
340
340
80
80
68
68
114
114
3
3
4
4
4
4
3
3
4
4
4
4
630
810
700
860
1,070
1,310
940
1,190
875
1,050
1,520
1,820
170
260
310
310
310
310
360
360
42
52
52
86
86
72
120
2.1
4
4
4
4
4
4
2.1
4
4
4
4
4
4
278
475
605
715
965
795
1,220
180
280
320
320
320
320
380
380
46
52
52
86
86
75
126
2.1
4
4
4
4
4
4
2.1
4
4
4
4
4
4
190
290
340
340
340
340
400
400
46
55
55
92
92
78
132
2.1
4
4
4
4
5
5
200
310
360
360
360
360
420
51
58
58
98
98
80
2.1
4
4
4
4
5
Cr
B-104
ra
r1a
r1a
ra
da
Da dc
dd
de
dc
db Db
Db

dynamic
PrFr
static
PorFr
Dimensions
mm
type
NF
Fw
Ew
NF
195
193
208
204
208
204
255
292
292
NF
NF
193
208
207
208
205
220
220
NF
NF
Mass
mm
dc
dd
de
Da
min
min
max
min
min
max
207
206.6
225
223.2
225
223.2
173
173
176
176
176
176
173
176
176
192
192
200
200
200
200
197
197
211
211
211
211
210
210
228
228
228
228
277
277
324
324
324
324
277
324
324
259
297
297
2.5
2.5
3
3
3
3
2.5
2.5
3
3
3
3
22
25.1
31.3
34
50.5
56
21.6
30.6
49.5
237
272
272
310
310
201.8
220.5
221.4
220.5
220.2
238
238
181
186
186
186
186
186
186
181
186
186
186
186
190
204
204
204
204
216
216
197
211
211
211
211
223
223
203
223
223
223
223
241
241
249
294
294
294
294
344
344
249
294
294
344
344
239
277
277
315
315
2
3
3
3
3
3
3
2
3
3
3
3
3
3
7.88
17
19.6
27.2
31
37
59.5
7.76
16.7
26.7
36.1
58.3
205
218
217
218
215
232
232
255
282
282
328
328
215
230.5
231.4
230.5
230.2
252
252
191
196
196
196
196
196
196
191
196
196
196
196
203
214
214
214
214
227
227
209
221
221
221
221
235
235
216
233
233
233
233
255
255
269
304
304
304
304
364
364
269
304
304
364
364
257
287
287
333
333
2
3
3
3
3
3
3
2
3
3
3
3
3
3
10.3
17.7
20.4
28.4
31.9
44.2
69.5
10.1
17.3
27.8
43.2
68.1
NF
NF
215
231
230
231
228
245
245
265
299
299
345
345
225
244.5
245.2
244.5
244
265
265
201
206
206
206
206
210
210
201
206
206
210
210
213
227
227
227
227
240
240
219
234
234
234
234
248
248
226
247
247
247
247
268
268
279
324
324
324
324
380
380
279
324
324
380
380
267
304
304
351
351
2
3
3
3
3
4
4
2
3
3
3
3
4
4
10.7
21.3
24.2
34.4
39.5
49.4
80.5
10.5
20.8
33.7
48.3
78.9
NF
NF
229
244
243
244
241
260
281
316
316
360
239.4
258
259
258
257.8
280
211
216
216
216
216
220
211
216
216
220
226
240
240
240
240
254
233
247
247
247
247
263
241
261
261
261
261
283
299
344
344
344
344
400
299
344
344
400
283
321
321
366
2
3
3
3
3
4
2
3
3
3
3
4
13.9
25.3
28.1
41.3
47.8
55.8
13.7
24.8
40.5
B-105
max
4
min
ras
r1as
max
max
type N
db
Db
kg
type NU
da
(approx.)
54.5
B
r
r1
r1
r
d FW
r1
Type NU
r
d J
Type NJ
Type NUP
d 200360mm
Boundary dimensions
mm
d
Basic load ratings

dynamic
static
dynamic
kN
Limiting speeds
Bearing numbers
static
kgf
rpm
grease
oil
type
NU
type
NJ
154,000 229,000
1,400
1,600
NU2340
NJ
NUP
750
1,080
1,810
1,570
2,620
51,000
77,500
116,000
122,000
181,000
76,500
110,000
184,000
161,000
268,000
2,000
1,600
1,500
1,400
1,200
2,300
1,900
1,700
1,600
1,400
NU1044
NU244
NU2244
NU344
NU2344
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
N
N
N
N
N
530
935
1,440
1,430
2,100
820
1,340
2,320
1,950
3,200
54,000
95,500
146,000
146,000
214,000
83,500
136,000
236,000
198,000
325,000
1,800
1,500
1,300
1,300
1,100
2,100
1,700
1,600
1,500
1,300
NU1048
NU248
NU2248
NU348
NU2348
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
N
N
N
N
N
4
5
5
6
6
645
1,150
1,780
1,620
2,340
1,000
1,660
2,930
2,230
3,600
65,500
117,000
182,000
165,000
239,000
102,000
170,000
299,000
228,000
365,000
1,600
1,300
1,200
1,200
1,000
1,900
1,600
1,400
1,400
1,200
NU1052
NU252
NU2252
NU352
NU2352
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
N
N
N
N
N
4
5
5
6
6
4
5
5
6
6
660
1,190
1,840
1,820
2,700
1,050
1,760
3,100
2,540
4,250
67,000
121,000
188,000
185,000
275,000
107,000
180,000
315,000
259,000
430,000
1,500
1,200
1,100
1,100
920
1,800
1,400
1,300
1,200
1,100
NU1056
NU256
NU2256
NU356
NU2356
NJ
NJ
NJ
NJ
NJ
NUP
NUP
NUP
NUP
NUP
N
N
N
N
N
74
85
140
4
5
5
4
5
5
855
1,400
2,180
1,340
2,070
3,650
87,000 137,000
143,000 211,000
223,000 370,000
1,400
1,100
1,000
1,600
1,300
1,200
NU1060
NU260
NU2260
NJ
NJ
NJ
NUP
NUP
NUP
N
N
N
480
580
580
74
92
150
4
5
5
4
5
5
875
1,600
2,550
1,410
2,390
4,350
89,500 143,000
164,000 244,000
260,000 445,000
1,300
1,000
950
1,500
1,200
1,100
NU1064
NU264
NU2264
NJ
NJ
NJ
NUP
NUP
NUP
N
N
N
520
82
1,050
1,670
107,000 170,000
1,200
1,400
NU1068
NJ
NUP
540
82
1,080
1,750
110,000 179,000
1,100
1,300
NU1072
NJ
NUP
r1s min
Cr
Cor
rs min
420
138
1,510
2,240
340
400
400
460
460
56
65
108
88
145
3
4
4
5
5
3
4
4
5
5
500
760
1,140
1,190
1,780
360
440
440
500
500
56
72
120
95
155
3
4
4
5
5
3
4
4
5
5
400
480
480
540
540
65
80
130
102
165
4
5
5
6
6
420
500
500
580
580
65
80
130
108
175
460
540
540
Cr
Cor
B-106
type type
NUP
N
ra
r1a
r1a
ra
da
Da dc
dd
de
dc
db Db
Db

dynamic
PrFr
static
PorFr
Dimensions
mm
type
NF
Fw
Ew
260
NF
NF
Mass
mm
da
db
dc
dd
de
Da
min
min
max
min
min
max
360
280
220
220
254
263
283
400
400
250
270
270
284
284
310
350
350
396
396
262
286
286
307
307
233
236
236
240
240
233
236
236
240
240
248
266
266
279
279
254
273
273
287
287
264
289
289
307
307
327
384
384
440
440
NF
NF
270
295
295
310
310
330
385
385
430
430
282
313
313
335
335
253
256
256
260
260
253
256
256
260
260
268
293
293
305
305
275
298
298
313
313
284
316
316
333
333
NF
NF
296
320
320
336
336
364
420
420
464
464
309.6
340
340
362
362
276
280
280
284
284
276
280
280
284
284
292
318
318
331
331
300
323
323
339
339
NF
NF
316
340
340
362
362
384
440
440
498
498
329.6
360
360
390
390
296
300
300
304
304
296
300
300
304
304
312
336
336
356
356
NF
340
364
364
420
476
476
356
387
387
316
320
320
316
320
320
NF
360
390
390
440
510
510
376
415
415
336
340
340
385
475
403
405
495
423
kg
type NU
type N
ras
r1as
max
max
366
92.6
90.7
327
384
384
440
440
313
355
355
402
402
2.5
3
3
4
4
2.5
18.2
3
37.7
3
59
4
73.4
4
116
17.9
37
57.8
71.7
114
347
424
424
480
480
347
424
424
480
480
333
390
390
436
436
2.5
3
3
4
4
2.5
19.6
3
50.2
3
80
4
93.4
4
147
19.3
49.2
78.4
91.3
144
312
343
343
359
359
384
460
460
516
516
384
460
460
516
516
367
426
426
471
471
3
4
4
5
5
3
4
4
5
5
29.1
66.9
104
117
182
28.7
65.6
102
114
178
320
343
343
366
366
332
365
365
386
386
404
480
480
556
556
404
480
480
556
556
387
446
446
505
505
3
4
4
5
5
3
4
4
5
5
30.9
70.8
109
142
222
30.4
69.4
107
139
218
336
361
361
344
368
368
358
392
392
444
520
520
444
520
520
423
482
482
3
4
4
3
4
4
43.6
88.2
138
42.9
86.4
135
336
340
340
356
386
386
364
393
393
378
419
419
464
560
560
464
560
560
443
516
516
3
4
4
3
4
4
46
111
172
45.3
109
168
360
360
381
390
405
500
500
479
61.8
60.8
380
380
401
410
425
520
520
499
64.7
63.7
B-107
Db
max
4
min
(approx.)
B
r
r1
r
d FW
r1
r1
r1
Type NU
r
D EW
Type NJ
r1
d J
Type N
Type NUP
Type NF
d 380500mm
Boundary dimensions
Basic load ratings

dynamic
static
dynamic
mm
kN
Limiting speeds
Bearing numbers
static
kgf
rpm
grease
oil
type
NU
type
NJ
112,000 187,000
1,100
1,200
NU1076
NJ
NUP
2,190
134,000 223,000
990
1,200
NU1080
NJ
NUP
1,350
2,290
138,000 233,000
950
1,100
NU1084
NJ
NUP
1,430
2,430
146,000 248,000
900
1,100
NU1088
NJ
NUP
1,540
2,630
157,000 269,000
850
1,000
NU1092
NJ
NUP
100
1,580
2,750
161,000 280,000
810
960
NU1096
NJ
NUP
100
1,610
2,870
164,000 292,000
770
910
NU10/500
NJ
NUP
rs min
r1s min
Cr
Cor
380
560
82
1,100
1,840
400
600
90
1,320
420
620
90
440
650
94
460
680
100
480
700
500
720
Cr
Cor
B-108
type type
NUP
N
ra
r1a
r1a
ra
da
Da dc
dd
de
dc
db Db
Db

dynamic
PrFr
static
PorFr
Dimensions
mm
type
NF
Fw
Ew
425
Mass
mm
da
db
dc
dd
de
Da
min
min
max
min
min
max
515
443
400
400
421
430
445
540
540
450
550
470
420
420
446
455
473
580
470
570
490
440
440
466
475
493
493
597
513.8
464
464
488
499
516
624
537.6
484
484
511
536
644
557.6
504
504
556
664
577.6
524
524
kg
type NU
type N
ras
r1as
max
max
519
67.5
66.5
580
554
87.6
86.3
600
600
574
91
89.6
517
626
626
602
105
103
522
541
656
656
629
122
120
531
542
561
676
676
649
126
124
551
562
581
696
696
669
130
128
B-109
Db
max
4
min
(approx.)
L Type Loose Rib

L type collar ring
B2
B2
r1
r1
B1
B1
d d1
d d1
NHNJHJ
NUJNUHJ
d 2060mm
Dimensions
Bearing
numbers
mm
1
Mass
Dimensions
kg
mm
d1
B1
B2
r1s min
20
29.9
29.5
29.9
29.5
31.8
31.1
31.8
31.1
3
3
3
3
4
4
4
4
6.75
5.5
7.5
6.5
7.5
6.5
8.5
7.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
HJ204
HJ204E
HJ2204
HJ2204E
HJ304
HJ304E
HJ2304
HJ2304E
0.012
0.009
0.013
0.01
0.017
0.014
0.018
0.015
34.8
34.5
34.8
34.5
39
38
39
38
43.6
3
3
3
3
4
4
4
4
6
7.25
6.
7.5
6.5
8
7
9
8
10.5
0.6
0.6
0.6
0.6
1.1
1.1
1.1
1.1
1.5
HJ205
HJ205E
HJ2205
HJ2205E
HJ305
HJ305E
HJ2305
HJ2305E
HJ405
0.015
0.012
0.015
0.013
0.025
0.021
0.027
0.024
0.057
30
41.7
41.1
41.7
41.1
45.9
44.9
45.9
44.9
50.5
4
4
4
4
5
5
5
5
7
8.25
7
8.5
7.5
9.5
8.5
11.5
9.5
11.5
0.6
0.6
0.6
0.6
1.1
1.1
1.1
1.1
1.5
HJ206
HJ206E
HJ2206
HJ2206E
HJ306
HJ306E
HJ2306
HJ2306E
HJ406
0.025
0.017
0.025
0.02
0.039
0.035
0.043
0.035
0.08
35
47.6
48
47.6
48
50.8
51
50.8
51
59
4
4
4
4
6
6
6
6
8
8
7
8.5
8.5
11
9.5
14
11
13
0.6
0.6
0.6
0.6
1.1
1.1
1.1
1.1
1.5
HJ207
HJ207E
HJ2207
HJ2207E
HJ307
HJ307E
HJ2307
HJ2307E
HJ407
0.03
0.027
0.031
0.031
0.056
0.048
0.064
0.055
0.12
25
Bearing
numbers
Mass
kg
d1
B1
B2
r1s min
40
54.2
53.9
54.2
53.9
58.4
57.6
58.4
57.6
64.8
5
5
5
5
7
7
7
7
8
9
8.5
9.5
9
12.5
11
14.5
12.5
13.
1.1
1.1
1.1
1.1
1.5
1.5
1.5
1.5
2
HJ208
HJ208E
HJ2208
HJ2208E
HJ308
HJ308E
HJ2308
HJ2308E
HJ408
0.046
0.042
0.047
0.045
0.083
0.07
0.09
0.08
0.14
45
59
58.9
58.9
64
64.5
64
64.5
71.8
5
5
5
7
7
7
7
8
9.5
8.5
9
12.5
11.5
15
13
13.5
1.1
1.1
1.1
1.5
1.5
1.5
1.5
2
HJ209
HJ209E
HJ2209E
HJ309
HJ309E
HJ2309
HJ2309E
HJ409
0.053
0.047
0.05
0.099
0.093
0.109
0.103
0.175
50
64.6
63.9
64.6
71
71.4
71
71.4
78.8
5
5
5
8
8
8
8
9
10
9
9.5
14
13
17
14.5
14.5
1.1
1.1
1.1
2
2
2
2
2.1
HJ210
HJ210E
HJ2210
HJ310
HJ310E
HJ2310
HJ2310E
HJ410
0.063
0.055
0.061
0.142
0.134
0.157
0.15
0.23
55
70.8
70.8
70.8
77.2
77.7
77.2
77.7
85.2
6
6
6
9
9
9
9
10
11
9.5
10
15
14
18.5
15.5
16.5
1.1
1.1
1.1
2
2
2
2
2.1
HJ211
HJ211E
HJ2211E
HJ311
HJ311E
HJ2311
HJ2311E
HJ411
0.084
0.072
0.076
0.182
0.168
0.203
0.185
0.29
60
78.4
77.6
6
6
11
10
1.5
1.5
HJ212
HJ212E
0.108
0.094
(approx.)
(approx.)
1 Maximum allowable dimension for chamfer dimension r. Note: 1. This L type collar ring is used with NU type cylindrical roller bearings; in duplex
arrangements with NJ or NU type bearing numbers, they become NH type and NUJ type respectively. For bearing dimensions, allowable rotations,
and mass, please refer to pages B-94 to B-99. 2. "" indicates L type collar rings that can also be used with dimension series 22 bearings.
B-110
L Type Loose Rib
B2
B2
r1
r1
B1
B1
d d1
d d1
NHNJHJ
NUJNUHJ
d 60105mm
Dimensions
Bearing
numbers
mm
1
Mass
Dimensions
kg
mm
d1
B1
B2
r1s min
60
84.2
84.6
84.2
84.6
91.8
9
9
9
9
10
15.5
14.5
19
16
16.5
2.1
2.1
2.1
2.1
2.1
HJ312
HJ312E
HJ2312
HJ2312E
HJ412
0.22
0.205
0.245
0.23
0.34
65
84.8
84.5
84.8
84.5
91
91
91
91
98.5
6
6
6
6
10
10
10
10
11
11
10
11.5
10.5
17
15.5
20
18
18
1.5
1.5
1.5
1.5
2.1
2.1
2.1
2.1
2.1
HJ213
HJ213E
HJ2213
HJ2213E
HJ313
HJ313E
HJ2313
HJ2313E
HJ413
0.123
0.111
0.126
0.118
0.28
0.25
0.304
0.29
0.42
70
89.6
89.5
89.5
98
98
98
98
110.5
7
7
7
10
10
10
10
12
12.5
11
11.5
17.5
15.5
20.5
18.5
20
1.5
1.5
1.5
2.1
2.1
2.1
2.1
3
HJ214
HJ214E
HJ2214E
HJ314
HJ314E
HJ2314
HJ2314E
HJ414
0.15
0.13
0.138
0.33
0.293
0.358
0.35
0.605
75
94
94.5
94.5
104.2
104.6
104.2
104.6
116.0
7
7
7
11
11
11
11
13
12.5
11
11.5
18.5
16.5
21.5
19.5
21.5
1.5
1.5
1.5
2.1
2.1
2.1
2.1
3
HJ215
HJ215E
HJ2215E
HJ315
HJ315E
HJ2315
HJ2315E
HJ415
0.156
0.141
0.164
0.4
0.35
0.432
0.41
0.71
101.2
101.7
111.8
111
111.8
8
8
11
11
11
13.5
12.5
19.5
17
23
2
2
2.1
2.1
2.1
HJ216
HJ216E
HJ316
HJ316E
HJ2316
0.207
0.193
0.47
0.405
0.511
80
Bearing
numbers
Mass
kg
B2
d1
B1
80
111
122
11
13
20
22
2.1
3
85
108.2
107.7
107.7
117.5
118.4
117.5
118.4
8
8
8
12
12
12
12
14
12.5
13
20.5
18.5
24
22
2
2
2
3
3
3
3
HJ217
HJ217E
HJ2217E
HJ317
HJ317E
HJ2317
HJ2317E
0.25
0.21
0.216
0.56
0.505
0.606
0.55
90
114.2
114.6
114.2
114.6
125
124.7
125
124.7
9
9
9
9
12
12
12
12
15
14
16
15
21
18.5
26
22
2
2
2
2
3
3
3
3
HJ218
HJ218E
HJ2218
HJ2218E
HJ318
HJ318E
HJ2318
HJ2318E
0.305
0.272
0.315
0.308
0.63
0.548
0.704
0.69
95
121
121
121
121
132
132.7
132
132.7
9
9
9
9
13
13
13
13
15.5
14.0
16.5
15.5
22.5
20.5
26.5
24.5
2.1
2.1
2.1
2.1
3
3
3
3
HJ219
HJ219E
HJ2219
HJ2219E
HJ319
HJ319E
HJ2319
HJ2319E
0.352
0.304
0.363
0.335
0.76
0.7
0.826
0.8
100
128
128
128
128
140.5
140.3
140.5
140.3
10
10
10
10
13
13
13
13
17
15
18
16
22.5
20.5
27.5
23.5
2.1
2.1
2.1
2.1
3
3
3
3
HJ220
HJ220E
HJ2220
HJ2220E
HJ320
HJ320E
HJ2320
HJ2320E
0.444
0.38
0.456
0.385
0.895
0.8
0.986
0.92
105 135.0
10
17.5
2.1
HJ221
0.505
(approx.)
r1s min
(approx.)
HJ2316E
HJ416
0.45
0.78
and mass, please refer to pages B-98to B-103. 2. "" indicates L type collar rings that can also be used with dimension series 22 bearings.
B-111
L Type Loose Rib

L type collar ring
B2
B2
r1
r1
B1
B1
d d1
d d1
NHNJHJ
NUJNUHJ
d 105200mm
Dimensions
Bearing
numbers
mm
1
Dimensions
kg
mm
B1
B2
105 147.0
13
22.5
HJ321
0.97
141.5
142.1
141.5
142.1
155.5
156.6
155.5
156.6
11
11
11
11
14
14
14
14
18.5
17
20.5
19.5
23
22
28
26.5
2.1
2.1
2.1
2.1
3
3
3
3
HJ222
HJ222E
HJ2222
HJ2222E
HJ322
HJ322E
HJ2322
HJ2322E
0.615
0.553
0.645
0.605
1.17
1.09
1.28
1.25
153
153.9
153
153.9
168.5
169.2
168.5
169.2
11
11
11
11
14
14
14
14
19
17
22
20
23.5
22.5
28
26
2.1
2.1
2.1
2.1
3
3
3
3
HJ224
HJ224E
HJ2224
HJ2224E
HJ324
HJ324E
HJ2324
HJ2324E
0.715
0.634
0.767
0.705
1.4
1.28
1.53
1.42
165.5
164.7
165.5
164.7
182
183
182
183
11
11
11
11
14
14
14
14
19
17
25
21
24
23
29.5
28
3
3
3
3
4
4
4
4
HJ226
HJ226E
HJ2226
HJ2226E
HJ326
HJ326E
HJ2326
HJ2326E
0.84
0.684
0.953
0.831
1.62
1.53
1.8
1.75
179.5
180.2
179.5
180.2
196
196.8
196
196.8
11
11
11
11
15
15
15
15
19
18
25
23
26
25
33.5
31
3
3
3
3
4
4
4
4
HJ228
HJ228E
HJ2228
HJ2228E
HJ328
HJ328E
HJ2328
HJ2328E
1
0.929
1.14
1.11
1.93
1.91
2.21
2.3
12
20.5
HJ230
1.24
110
120
130
140
d1
150 193
r1s min
Mass
Bearing
numbers
Mass
kg
B1
B2
150
194
193
194
210
211
210
211
12
12
12
15
15
15
15
19.5
26.5
24.5
26.5
25
34
31.5
3
3
3
4
4
4
4
HJ230E
HJ2230
HJ2230E
HJ330
HJ330E
HJ2330
HJ2330E
1.18
1.39
1.42
2.37
2.25
2.69
2.6
160
207
207.8
207
206.6
225
223.2
225
223.2
12
12
12
12
15
15
15
15
21
20
28
24.5
28
25
37
32
3
3
3
3
4
4
4
4
HJ232
HJ232E
HJ2232
HJ2232E
HJ332
HJ332E
HJ2332
HJ2332E
1.48
1.34
1.69
1.61
2.75
2.4
3.16
2.85
170
220.5
221.4
220.5
220.2
238
238
12
12
12
12
16
16
22
20
29
24
29.5
38.5
4
4
4
4
4
4
HJ234
HJ234E
HJ2234
HJ2234E
HJ334
HJ2334
1.7
1.51
1.93
1.82
3.25
3.71
180
230.5
231.4
230.5
230.2
252
252
12
12
12
12
17
17
22
20
29
24
30.5
40
4
4
4
4
4
4
HJ236
HJ236E
HJ2236
HJ2236E
HJ336
HJ2336
1.8
1.7
2.04
1.91
3.85
4.42
190
244.5
245.2
244.5
244
265
265
13
13
13
13
18
18
23.5
21.5
31.5
26.5
32
41.5
4
4
4
4
5
5
HJ238
HJ238E
HJ2238
HJ2238E
HJ338
HJ2338
2.2
1.94
2.52
2.38
4.45
5.05
14
25
HJ240
2.6
200 258
r1s min
d1
(approx.)
(approx.)
B-112
L Type Loose Rib
B2
B2
r1
r1
B1
B1
d d1
d d1
NHNJHJ
NUJNUHJ
d 200320mm
Dimensions
Bearing
numbers
mm
Mass
kg
d1
B1
B2
r1s min
200
259
258
257.8
280
280
14
14
14
18
18
23
34
28
33
44.5
4
4
4
5
5
HJ240E
HJ2240
HJ2240E
HJ340
HJ2340
2.35
2.99
2.86
5
5.76
220
286
307
15
20
27.5
36
4
5
HJ244
HJ344
3.55
7.05
240
313
335
16
22
29.5
39.5
4
5
HJ248
HJ348
4.65
8.2
260
340
362
18
24
33
43
5
6
HJ252
HJ352
6.2
11.4
280
360
390
18
26
33
46
5
6
HJ256
HJ356
7.39
13.9
300
387
20
34.5
HJ260
9.14
320
415
21
37
HJ264
(approx.)
11.3
B-113
Multi-Row Cylindrical Roller Bearings

B
B
r
r
r
d FW
D Ew
Type NNU
Cylindrical bore
Type NN
Tapered bore
taper 1:12
Cylindrical bore
Tapered bore
taper 1:12
d 25110mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
2
Limiting speeds
Bearing
static
kgf
rpm
cylindrical
bore
type NNU
1
tapered
bore
Cr
Cor
grease
oil
30.0
2,630
3,050
14,000
17,000
31.0
37.0
3,150
3,800
12,000
15,000
38.0
47.5
3,850
4,850
11,000
13,000
21
43.5
55.5
4,400
5,650
9,700
11,000
75
23
52.0
68.5
5,300
7,000
8,800
10,000
50
80
23
53.0
72.5
5,400
7,400
8,000
9,400
55
90
26
1.1
69.5
96.5
7,050
9,850
7,300
8,600
60
95
26
1.1
71.0
102
7,250
10,400
6,700
7,900
65
100
26
1.1
75.0
111
7,650
11,400
6,200
7,300
70
110
30
1.1
94.5
143
9,650
14,600
5,800
6,800
75
115
30
1.1
96.5
149
9,850
15,200
5,400
6,300
80
125
34
1.1
116
179
11,800
18,200
5,100
5,900
85
130
34
1.1
122
194
12,400
19,800
4,800
5,600
90
140
37
1.5
143
228
14,600
23,200
4,500
5,300
95
145
37
1.5
146
238
14,900
24,200
4,300
5,000
100
140
150
40
37
1.1
1.5
131
153
260
256
13,300
15,600
26,500
26,100
4,300
4,000
5,100
4,800
NNU4920
NNU4920K
105
145
160
40
41
1.1
2
133
198
268
320
13,500
20,200
27,400
33,000
4,100
3,800
4,800
4,500
NNU4921
NNU4921K
110
150
170
40
45
1.1
2
137
229
284
375
14,000
23,300
28,900
38,000
3,900
3,600
4,600
4,300
NNU4922
NNU4922K
rs min
Cr
25
47
16
0.6
25.8
30
55
19
35
62
20
40
68
45
Cor
1 "K" indicates bearings have tapered bore with a taper ratio of 1: 12. 2 Smallest allowable dimension for chamfer dimension r.
B-114
ra
ra
ra
ra
da dd
Da dc
ra
da Db
Db
db
Db da

dynamic
PrFr
static
PorFr
numbers
Dimensions
Mass (approx.)
kg
type NN
1
cylindrical
tapered
bore
bore
mm
Fw
NN3005
NN3005K
NN3006
mm
type NNU
da
db
dc
dd
Da
Db
ras
Ew
min
min
max
min
max
max
min
41.3
29
30
43
NN3006K
48.5
35
36.5
NN3007
NN3007K
55
40
41.5
NN3008
NN3008K
61
45
47
NN3009
NN3009K
67.5
50
52
NN3010
NN3010K
72.5
55
NN3011
NN3011K
81
NN3012
NN3012K
NN3013
NN3013K
NN3014
type NN
max
cylindrical
bore
tapered
bore
42
0.6
0.124 0.121
50
49
0.199 0.193
57
56
0.242 0.235
63
62
0.312 0.303
70
69
0.405 0.393
57
75
74
0.433 0.419
61.5
63.5
83.5
82
0.651 0.631
86.1
66.5
68.5
88.5
87
0.704 0.683
91
71.5
73.5
93.5
92
0.758 0.735
NN3014K
100
76.5
79
103.5 101
1.04
1.01
NN3015
NN3015K
105
81.5
84
108.5 106
1.14
1.11
NN3016
NN3016K
113
86.5
89.5
118.5 114
1.52
1.47
NN3017
NN3017K
118
91.5
94.5
123.5 119
1.61
1.56
NN3018
NN3018K
127
98
101
132
129
1.5
2.07
2.01
NN3019
NN3019K
132
103
106
137
134
1.5
2.17
2.1
NN4920
NN3020
NN4920K 113
NN3020K
129
137
106.5 110
108
111
111
115
133.5
133.5 131
142
139
1
1.83
1.5
1.75
1.75
2.26
1.67
2.19
NN4921
NN3021
NN4921K 118
NN3021K
134
146
111.5 115
114
117
116
120
138.5
138.5 136
151
148
1
2
1.91
1.82
1.82
2.89
1.73
2.8
NN4922
NN3022
NN4922K 123
NN3022K
139
155
116.5 120
119
123
121
125
143.5
143.5 141
161
157
1
2
1.99
1.9
1.9
3.69
1.81
3.56
B-115
cylindrical
bore
tapered
bore

B
B
r
r
r
d FW
D Ew
Type NNU
Cylindrical bore
Type NN
Tapered bore
taper 1:12
Cylindrical bore
Tapered bore
taper 1:12
d 120280mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
rs min
120
165
180
45
46
130
180
200
140
Limiting speeds
Bearing
static
kgf
rpm
grease
oil
cylindrical
bore
type NNU
1
tapered
bore
Cr
Cor
Cr
Cor
1.1
2
183
233
360
390
18,700
23,700
37,000
40,000
3,600
3,300
4,200
3,900
NNU4924
NNU4924K
50
52
1.5
2
220
284
440
475
22,400
29,000
45,000
48,500
3,300
3,100
3,900
3,600
NNU4926
NNU4926K
190
210
50
53
1.5
2
227
298
470
515
23,100
30,500
48,000
52,500
3,000
2,800
3,600
3,300
NNU4928
NNU4928K
150
210
225
60
56
2
2.1
345
335
690
585
35,000
34,000
70,500
60,000
2,800
2,600
3,300
3,100
NNU4930
NNU4930K
160
220
240
60
60
2
2.1
355
375
740
660
36,500
38,000
75,500
67,500
2,600
2,500
3,100
2,900
NNU4932
NNU4932K
170
230
260
60
67
2
2.1
360
440
765
775
37,000
45,000
78,000
79,000
2,500
2,300
2,900
2,700
NNU4934
NNU4934K
180
250
280
69
74
2
2.1
460
565
965
995
46,500
57,500
98,500
102,000
2,300
2,200
2,700
2,600
NNU4936
NNU4936K
190
260
290
69
75
2
2.1
475
580
1,030
1,040
48,500
59,000
105,000
106,000
2,200
2,000
2,600
2,400
NNU4938
NNU4938K
200
280
310
80
82
2.1
2.1
555
655
1,180
1,170
56,500
66,500
120,000
119,000
2,100
1,900
2,400
2,300
NNU4940
NNU4940K
220
300
340
80
90
2.1
3
585
815
1,300
1,480
59,500
83,000
132,000
151,000
1,900
1,700
2,200
2,100
NNU4944
NNU4944K
240
320
360
80
92
2.1
3
610
855
1,410
1,600
62,500
87,000
144,000
163,000
1,700
1,600
2,000
1,900
NNU4948
NNU4948K
260
360
400
100
104
2.1
4
900
1,060
2,070
1,990
92,000
108,000
211,000
203,000
1,600
1,500
1,800
1,700
NNU4952
NNU4952K
280
380
420
100
106
2.1
4
925
1,080
2,200
2,080
94,500
110,000
224,000
212,000
1,400
1,300
1,700
1,600
NNU4956
NNU4956K
B-116
ra
ra
ra
ra
da dd
Da dc
ra
da Db
Db
db
Db da

dynamic
PrFr
static
PorFr
numbers
Dimensions
Mass (approx.)
kg
type NN
1
cylindrical
tapered
bore
bore
mm
Fw
Ew
da
db
dc
dd
mm
Da
min
min
max
min
max
type NNU
Db
max
ras
min
max
type NN
cylindrical
bore
tapered
bore
cylindrical
bore
tapered
bore
NN4924
NN3024
NN4924K 134.5 154.5 126.5 130

NN3024K
165
129
133
133
137
158.5
158.5 156.5
171
167
1
2
2.75
2.63
2.63
3.98
2.51
3.83
NN4926
NN3026
NN4926K 146
NN3026K
168
182
138
139
142
143
144
148
172
172
191
170
183
1.5
2
3.69
3.52
3.52
5.92
3.35
5.71
NN4928
NN3028
NN4928K 156
NN3028K
178
192
148
149
152
153
154
158
182
182
201
180
194
1.5
2
3.94
3.76
3.76
6.44
3.58
6.21
NN4930
NN3030
NN4930K 168.5 196.5 159

NN3030K
206
161
164
166
166
171
201
201
214
198.5
208
2
2
6.18
5.9
5.9
7.81
5.62
7.53
NN4932
NN3032
NN4932K 178.5 206.5 169

NN3032K
219
171
174
176
176
182
211
211
229
208.5
221
2
2
6.53
6.23
6.24
8.92
5.94
8.59
NN4934
NN3034
NN4934K 188.5 216.5 179

NN3034K
236
181
184
187
186
192
221
221
249
218.5
238
2
2
6.87
6.55
6.56 6.24
12.6 12.2
NN4936
NN3036
NN4936K 202
NN3036K
234
255
189
191
195
197
199
205
241
241
269
236
257
2
2
9.9
9.46
9.45 9.01
16.6 16
NN4938
NN3038
NN4938K 212
NN3038K
244
265
199
201
205
207
209
215
251
251
279
246
267
2
2
10.4
9.94
9.93 9.47
17.4
18
NN4940
NN3040
NN4940K 225
NN3040K
261
282
211
211
218
218
222
228
269
269
299
264
285
2
2
14.7
14
14
21.6
13.3
20.8
NN4944
NN3044
NN4944K 245
NN3044K
281
310
231
233
238
240
242
248
289
289
327
284
313
2
2.5
15.9
15.2
15.2
29.3
14.5
28.2
NN4948
NN3048
NN4948K 265
NN3048K
301
330
251
253
258
261
262
269
309
309
347
304
333
2
2.5
17.2
16.4
16.4
32.8
15.6
31.6
NN4952
NN3052
NN4952K 292
NN3052K
336
364
271
276
279
285
288
296
349
349
384
339
367
2
3
29.6
28.3
28.3
47.4
27
45.8
NN4956
NN3056
NN4956K 312
NN3056K
356
384
291
296
299
305
308
316
369
369
404
359
387
2
3
31.6
30.2
30.2
51.1
28.8
49.3
B-117

B
B
r
r
r
d FW
D Ew
Type NNU
Cylindrical bore
Type NN
Tapered bore
taper 1:12
Cylindrical bore
Tapered bore
taper 1:12
d 300500mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
rs min
300
420
460
118
118
3
4
320
440
480
118
121
340
460
520
360
Cr
Limiting speeds
Bearing
static
kgf
rpm
grease
oil
cylindrical
bore
type NNU
1
tapered
bore
Cor
Cr
Cor
1,200
1,330
2,800
2,560
122,000
135,000
285,000
261,000
1,300
1,200
1,500
1,500
NNU4960
NNU4960K
3
4
1,240
1,350
2,970
2,670
126,000
138,000
305,000
272,000
1,200
1,100
1,400
1,300
NNU4964
NNU4964K
118
133
3
5
1,280
1,620
3,150
3,200
131,000
165,000
320,000
325,000
1,100
1,100
1,300
1,300
NNU4968
NNU4968K
480
540
118
134
3
5
1,290
1,650
3,250
3,300
131,000
169,000
330,000
340,000
1,100
1,000
1,300
1,200
NNU4972
NNU4972K
380
520
560
140
135
4
5
1,630
1,690
4,050
3,450
167,000
172,000
415,000
355,000
1,000
940
1,200
1,100
NNU4976
NNU4976K
400
540
600
140
148
4
5
1,690
2,040
4,300
4,150
172,000
208,000
435,000
420,000
940
880
1,100
1,000
NNU4980
NNU4980K
420
560
620
140
150
4
5
1,740
2,080
4,500
4,300
177,000
212,000
460,000
440,000
900
840
1,100
990
NNU4984
NNU4984K
440
600
650
160
157
4
6
2,150
2,420
5,550
5,100
219,000
247,000
565,000
520,000
850
800
1,000
940
NNU4988
NNU4988K
460
620
680
160
163
4
6
2,220
2,550
5,850
5,350
226,000
260,000
595,000
545,000
800
750
950
890
NNU4992
NNU4992K
480
650
170
2,280
5,900
233,000
600,000
770
910
NNU4996
NNU4996K
500
670
170
2,360
6,200
240,000
635,000
730
860
NNU49/500
NNU49/500K
B-118
ra
ra
ra
ra
da dd
Da dc
ra
da Db
Db
db
Db da

dynamic
PrFr
static
PorFr
numbers
Dimensions
Mass (approx.)
kg
type NN
1
cylindrical
tapered
bore
bore
mm
Fw
da
db
dc
dd
mm
Da
Ew
min
min
max
min
max
max
min
type NNU
Db
ras
type NN
max
cylindrical
bore
tapered
bore
cylindrical
bore
tapered
bore
NN4960
NN3060
NN4960K 339
NN3060K
391
418
313
316
323
326
335
343
407
407
444
394
421
2.5
3
48.6
46.4
46.4
70.8
44.2
68.6
NN4964
NN3064
NN4964K 359
NN3064K
411
438
333
336
343
346
355
363
427
427
464
414
441
2.5
3
51.4
49.1
49
76.2
46.7
73.5
NN3068
379
NN3068K
473
353
360
363
371
375
383
447
500
477
2.5
4
54.2
51.7
102
NN3072
398
NN3072K
493
373
380
383
391
394
402
467
520
497
2.5
4
57
54.4
107
103
NN3076
425
NN3076K
512
396
400
408
411
420
430
504
540
516
3
4
84.5
80.6
113
109
NN3080
445
NN3080K
547
416
420
428
432
440
450
524
580
551
3
4
88.2
84.1
146
141
NN3084
465
NN3084K
567
436
440
448
452
460
470
544
600
571
3
4
92
87.7
154
148
NN3088
492
NN3088K
596
456
464
469
477
487
497
584
626
601
3
5
127
121
178
172
NN3092
512
NN3092K
622
476
484
489
498
507
517
604
656
627
3
5
132
126
202
195
98.5
534
500
514
531
541
630
156
149
556
520
534
551
561
650
162
155
B-119
Four-Row Cylindrical Roller Bearings
d 120200mm
Boundary dimensions
dynamic
mm
d
B1
Basic load ratings

static
dynamic
kN
C1
rs min
r1s min
Cr
kgf
Cor
120
130
140
145
150
160
170
180
190
200
1 Minimal allowable dimension for chamfer dimension r or r1. 2 Oil groove and oil inlet are in center of outer ring.
B-120
static
Cr
Cor
Bearing
numbers
Dimensions Drawing
no.
Mass
kg
Fw
(approx.)
4R2437
4R2438
137
135
1
1
8.2
9.3
4R2628
150
12.1
4R2823
160
13.9
4R2906
4R2908
166
169
1
1
18
23.4
4R3031
4R3029
4R3040
4R3039
168
174
174
177
1
1
1
1
19.4
20
24.5
29.6
4R3224
4R3226
4R3232
4R3225
177
180
179
183
1
1
1
1
20.2
16.6
23.4
27.8
4R3426
4R3429
4R3423
4R3432
4R3425
4R3433
4R3431
187
189
190
193
193
192
196
1
1
1
1
1
1
1
14.2
22.2
22.8
28.2
19.3
29.5
44
4R3625
4R3628
4R3618
200
202
204
1
1
1
23.2
29.4
34.2
4R3820
4R3818
4R3821
4R3823
212
213
212
214
1
1
1
2
1
26.9
31.7
37.5
41.5
4R4039
4R4026
4R4037
222
223
222
1
1
1
28.5
36.7
40.5
Note: Drawing 1 represents a bearing with solid rollers and machined cage.
B-121
C1
C1
r1
r1
r
B1
B1
d FW
d FW
Drawing 1
Drawing 2
d 200300mm
Boundary dimensions
dynamic
mm
Basic load ratings

static
dynamic
kN
1
rs min
192
216
192
216
2.5
3
2.5
3
1,290
1,750
3,150
3,650
132,000
179,000
320,000
375,000
290
192
192
2.5
2.5
1,230
3,350
126,000
340,000
220
290
300
310
310
310
310
310
320
320
192
160
192
204
215
225
265
160
210
192
160
192
204
215
225
265
160
210
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3
2.5
1,190
1,000
1,390
1,420
1,530
1,480
1,630
1,190
1,550
3,350
2,590
3,400
3,750
3,750
3,950
4,500
2,550
3,650
122,000
102,000
141,000
144,000
156,000
151,000
167,000
121,000
158,000
340,000
264,000
350,000
385,000
380,000
405,000
460,000
260,000
370,000
230
330
340
206
260
206
260
2.5
3
2.5
3
1,520
2,050
3,800
5,100
155,000
209,000
385,000
520,000
240
330
340
360
220
220
220
220
220
220
3
3
2.5
3
3
2.5
1,490
1,670
1,760
4,150
4,200
4,050
152,000
170,000
179,000
420,000
425,000
415,000
250
350
220
220
1,730
4,300
176,000
440,000
260
370
380
220
280
220
280
3
3
3
3
1,760
2,420
4,450
6,250
179,000
247,000
455,000
635,000
270
380
280
280
2.5
2.5
2,580
6,850
263,000
700,000
280
390
390
420
220
275
280
220
275
280
3
2.5
4
3
2.5
4
1,780
2,290
2,430
4,650
6,250
6,150
181,000
233,000
248,000
475,000
635,000
630,000
290
410
420
240
300
240
300
3
3
3
3
2,240
2,830
5,550
7,500
228,000
288,000
565,000
765,000
300
400
420
420
420
300
240
300
300
300
240
300
300
3
3
3
3
3
3
3
3
2,480
2,020
2,720
2,900
7,500
5,450
7,600
7,850
253,000
206,000
278,000
295,000
765,000
555,000
775,000
800,000
200
290
320
210
B1
Cr
kgf
C1
r1s min
static
Cor
Cr
1 Minimal allowable dimension for chamfer dimension r or r1. 2 Oil groove and oil inlet are in center of outer ring.
3 Oil groove and oil inlet not on outer ring spacer.
B-122
Cor
Bearing
numbers
Dimensions Drawing
no.
Mass
kg
Fw
(approx.)
4R4041
4R4028
226
231
1
1
42.5
67
4R4206
236
39.5
4R4413
4R4419
4R4426
4R4425
4R4420
4R4416
4R4430
4R4428
4R4429
239
245
246
247
242
245
245
245
248
1
1
1
1
1
1
1
1
1
33.8
32.8
46.9
49.8
51.5
54.9
63.5
46.5
60.5
4R4614
4R4611
258
261
1
1
58.6
82.6
4R4811
4R4806
4R4807
270
268
274
1
1
1
56.8
63.6
79.6
4R5008
278
66
4R5217
4R5213
292
294
1
1
76.5
109
4R5405
299.7
105
4R5611
4R5612
4R5605
312
312
323
1
1
1
81.3
105
139
4R5806
4R5805
320
327
1
1
103
141
E-4R6014
E-4R6017
E-4R6015
E-4R6020
328
334
334
332
1
1
1
2
104
106
125
130
Note: Drawing 1 represents a bearing with solid rollers and machined cage; Drawing 2 represents a bearing with hollow rollers and pin type cage.
B-123
C1
C1
r1
r1
r
B1
B1
d FW
d FW
Drawing 1
Drawing 2
d 300460mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
1
kgf
C1
rs min
r1s min
320
270
300
270
3
3
3
3
2,900
2,510
7,850
5,350
295,000
256,000
800,000
545,000
430
240
240
2,240
5,950
228,000
605,000
320
440
450
460
470
240
240
340
350
230
240
340
350
3
3
3
3
3
3
3
3
2,290
2,370
3,400
4,150
6,050
6,150
9,450
10,900
234,000
242,000
345,000
425,000
615,000
630,000
960,000
1,110,000
330
440
460
200
340
200
340
3
4
3
4
1,820
3,250
4,850
8,850
186,000
330,000
495,000
905,000
340
480
490
370
300
350
300
5
4
5
4
3,450
3,350
9,650
8,300
350,000
340,000
985,000
845,000
360
510
400
400
4,250
11,500
435,000
1,170,000
370
480
520
230
400
230
400
5
5
5
5
2,100
4,650
6,250
13,500
214,000
475,000
635,000
1,370,000
380
520
520
540
280
300
400
280
300
400
4
4
4
4
4
4
3,400
3,550
5,200
9,150
9,600
15,200
350,000
360,000
530,000
935,000
980,000
1,550,000
400
560
560
400
410
400
410
5
4
5
4
4,250
5,750
11,800
17,000
430,000
585,000
1,210,000
1,730,000
410
546
400
400
4,200
12,700
430,000
1,290,000
420
560
580
620
280
230
400
280
230
400
4
4
5
4
4
5
3,150
2,430
5,000
8,750
6,250
13,400
320,000
248,000
510,000
895,000
635,000
1,360,000
440
620
450
450
6,450
18,700
660,000
1,910,000
460
620
620
650
400
400
470
400
400
470
4
4
5
4
4
5
5,350
4,950
7,150
16,700
15,000
20,600
545,000
505,000
730,000
1,700,000
1,530,000
2,100,000
300
420
460
310
B1
Cr
static
Cor
Cr
Cor
1 Minimal allowable dimension for chamfer dimension r or r1. 2 Oil inlet and oil groove are in center of the outer ring; no oil groove on the side.
3 Oil inlet in space of outer ring; no oil groove. 4 One-piece inner ring.
B-124
Bearing
numbers
Dimensions Drawing
no.
Mass
kg
Fw
(approx.)
E-4R6018
E-4R6019
332
344
2
1
136
162
E-4R6202
344.5
108
E-4R6414
E-4R6411
E-4R6412
E-4R6406
351
358
360
361.7
1
1
1
2
106
125
178
212
E-4R6603
E-4R6605
360
365
1
1
83.6
181
E-4R6811
E-4R6804
378
377
1
1
198
187
E-4R7203
397
262
E-4R7405
E-4R7404
400
409
1
1
106
273
E-4R7605
E-4R7607
E-4R7604
417
416
422
1
3
2
3
2
174
210
325
E-4R8007
E-4R8010
446
445
1
2
303
349
E-4R8201
444
256
E-4R8403
E-4R8404
E-4R8401
457
466
478
1
1
1
189
181
410
E-4R8801
487
437
E-4R9211
E-4R9209
E-4R9216
502
502
509
2
1
2
34
383
341
540
Note: Drawing 1 represents a bearing with solid rollers and machined cage; Drawing 2 represents a bearing with hollow rollers and pin type cage.
B-125
C1
C1
r1
r1
r
B1
B1
d FW
d FW
Drawing 1
Drawing 2
d 480690mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
Cr
Cor
5
5
9.5X20 5
6
6
5,950
7,100
7,950
18,100
21,600
24,000
605,000
720,000
810,000
1,840,000
2,200,000
2,450,000
405
470
510
515
480
530
5
5
5
5
6
5
5
5
5
5
6
5
7,100
7,650
7,750
7,900
8,650
8,250
22,900
22,500
24,600
24,100
24,700
25,000
725,000
780,000
790,000
805,000
880,000
840,000
2,340,000
2,290,000
2,500,000
2,450,000
2,520,000
2,550,000
320
540
320
540
5
6
5
6
4,550
8,300
13,500
25,000
465,000
845,000
1,380,000
2,550,000
700
735
540
535
540
535
6
5
6
5
8,200
9,000
25,500
26,600
835,000
915,000
2,600,000
2,710,000
530
700
760
780
540
520
570
540
520
570
6
6
6
6
6
6
7,850
9,150
10,300
25,400
26,700
29,100
800,000
935,000
1,050,000
2,590,000
2,730,000
2,970,000
550
800
520
520
9,450
27,000
965,000
2,750,000
560
680
360
360
4,650
16,500
475,000
1,680,000
570
815
594
594
11,800
34,500
1,200,000
3,500,000
600
820
870
870
575
540
640
575
540
640
6
7.5
7.5
10,000
10,600
13,600
31,500
29,600
40,500
1,020,000
1,090,000
1,390,000
3,200,000
3,000,000
4,150,000
610
870
660
660
9.5
7.5
12,600
40,000
1,280,000
4,100,000
650
920
920
670
690
670
690
7.5
7.5
4
7.5
14,600
14,300
46,000
46,500
1,490,000
1,460,000
4,700,000
4,750,000
660
820
440
440
7,300
27,800
745,000
2,840,000
690
980
715
715
7.5
7.5
16,800
54,500
1,720,000
5,550,000
480
650
650
680
420
450
500
420
450
500
500
680
690
690
700
710
720
420
470
510
515
480
530
510
670
700
520
12X20
7.5
7.5
r1s min
kgf
Cor
rs min
Cr
B1
C1
static
1 Minimal allowable dimension for chamfer dimension r or r1. 2 Oil inlet and oil groove are in center of the outer ring; no oil groove on the side.
3 Oil inlet in space of outer ring; no oil groove.
B-126
Bearing
numbers
Dimensions Drawing
no.
Mass
kg
Fw
(approx.)
4
E-4R9607
E-4R9609
E-4R9604
523
525
532
2
4
2
2
E-4R10010
E-4R10016
E-4R10006
E-4R10011
E-4R10008
E-4R10015
550
547
552
554
556
568
2
2
2
2
2
2
E-4R10201
E-4R10202
554
558
2
2
335
689
E-4R10403
E-4R10402
564
574.5
2
2
658
740
E-4R10603
E-4R10601
E-4R10602
574
590
601
2
2
2
626
800
1 010
E-4R11001
622
965
E-4R11202
590
265
E-4R11402
628
1 040
E-4R12003
E-4R12002
E-4R12001
655
672
672
2
2
2
980
1 150
1 330
E-4R12202
680
1 400
E-4R13005
E-4R13003
723
723
2
2
1 500
1 550
E-4R13201
702
580
E-4R13802
767.5
1 850
369
395
640
495
590
640
680
675
780
4 One-piece inner ring. Note: Drawing 1 represents a bearing with solid rollers and machined cage; Drawing 2 represents a bearing with hollow
rollers and pin type cage.
B-127
C1
C1
r1
r1
r
B1
B1
d FW
d FW
Drawing 1
Drawing 2
d 7001 200mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
Cr
Cor
12,900
43,000
1,320,000
4,400,000
9.5
16,800
54,500
1,710,000
5,550,000
700
15,900
53,500
1,620,000
5,450,000
745
745
720
720
7.5
7.5
7.5
7.5
17,600
19,100
58,000
60,500
1,790,000
1,950,000
5,900,000
6,150,000
1,030
1,080
1,100
750
805
745
750
790
720
7.5
6
7.5
7.5
6
7.5
17,300
18,700
19,100
59,500
61,000
60,500
1,760,000
1,900,000
1,950,000
6,050,000
6,250,000
6,150,000
800
1,080
1,080
700
750
700
750
7.5
6
7.5
6
16,500
17,300
55,000
59,000
1,680,000
1,760,000
5,600,000
6,000,000
820
1,130
1,130
1,160
800
825
840
800
800
840
7.5
7.5
7.5
7.5
7.5
7.5
19,600
19,600
21,600
66,500
66,500
71,000
2,000,000
2,000,000
2,200,000
6,800,000
6,800,000
7,250,000
840
1,160
840
840
7.5
21,600
71,000
2,200,000
7,250,000
850
1,150
1,150
1,180
1,180
650
800
650
850
650
800
650
850
9.5
6
7.5
9.5
9.5
6
7.5
9.5
15,700
19,700
16,400
24,100
51,000
71,000
51,500
78,500
1,610,000
2,010,000
1,670,000
2,460,000
5,200,000
7,250,000
5,250,000
8,000,000
860
1,160
735
710
17,800
62,500
1,810,000
6,400,000
900
1,230
895
870
7.5
7.5
24,700
88,000
2,520,000
9,000,000
920
1,280
865
850
7.5
7.5
26,200
88,500
2,670,000
9,000,000
1000
1,310
1,360
880
800
880
800
9.5
7.5
9.5
7.5
23,400
25,000
88,500
85,000
2,380,000
2,550,000
9,000,000
8,650,000
1030
1,380
850
850
7.5
7.5
24,400
89,000
2,490,000
9,100,000
1200
1,590
1,050
1,050
7.5
7.5
36,000
133,000
3,650,000
13,600,000
700
930
620
620
710
1,000
715
715
725
1,000
700
750
1,050
1,090
760
15X20
r1s min
kgf
Cor
rs min
Cr
B1
C1
static
1 Minimal allowable dimension for chamfer dimension r or r1. 2 Inner ring is divided into four. 3 Oil mist nozzles are attached.
4 Oil inlet in space of outer ring; no oil groove.
B-128
Bearing
numbers
Dimensions Drawing
no.
Mass
kg
Fw
(approx.)
E-4R14003
763
E-4R14205
787.5
1 900
E-4R14501
796
1 730
E-4R15001
E-4R15002
830
845
2
3
2
E-4R15204
E-4R15207
E-4R15203
828
845
855
2
3
2
3
2
2 000
2 550
2 560
E-4R16004
E-4R16005
870
880
2
2
1 950
2 090
E-4R16406
E-4R16405
E-4R16403
903
903
910
2
2
2
2 450
2 520
2 930
E-4R16801
920
2 840
E-4R17001
E-4R17003
E-4R17004
E-4R17002
941
930
945
928
2
2
2
2
1 980
2 430
2 270
2 970
E-4R17201
940
2 310
E-4R18001
985
3 250
E-4R18401
1 015
3 560
E-4R20001
E-4R20002
1 080
1 090
2
2
3 260
3 530
E-4R20601
1 124
3 800
E-4R24002
1 295
1 200
2 180
2 530
6 220
Note: Drawing 2 represents a bearing with hollow rollers and pin type cage.
B-129
1. Types, design features, and characteristics

Tapered roller bearings are designed so that the center
lines of the raceways and rollers all converge at a single
point as shown in Diagram 1.
Due to this design feature, rollers move along the center of
the raceway surfaces. The tapered rollers are guided by the
compound force of the inner and outer raceway surfaces
which keep them pressed up against the large rib on the
inner ring. A large variety of these bearings, including single,
double, and four row arrangements, are in use both in metric
and inch system sizes.
Table 1 lists the various types of tapered roller bearings
and their characteristics.
Diagram 1.
Table 1 Tapered roller bearing types and characteristics

Type
Characteristics
(1) There are both metric and inch system dimension series, and they have been standardized as shown in the
following table.
Dimension series
Metric system
Regulations
Basic
number
Inch system
JISB 1512
ISO 355
ABMA
(includes metric J-series)
Example, 30210
T2EE040
Inner ring no. / outer ring no.

("J" appears at the beginning of the
basic number in the case of J-series.)
Dimension series previously not covered by 3XX are regulated under JIS B 1512;
dimensions previously missing from 3XX will henceforth use the bearing number.
(2) In addition to level type, there are also medium contact angle and large contact angle types, and the contact
angle code C and D, respectively, is appended to the basic numbers of the latter two types.
Single row tapered
roller bearings
(3) Subunits
Tapered roller bearings can be disassembled into parts the inner ring, rollers, and cage (collectively
known as the "cone") and the outer ring (known as the "cup"). These are the bearings "subunits". Subunit
dimensions are standardized under ISO or ABMA standards, and unified subunits are interchangeable within
each dimensional standard. However, high precision grade bearings are generally not interchangeable, and
these subunits must be used by assembling only subunits with identical manufacturing numbers.
Aside from any cautionary notes that may appear, the single row tapered roller bearings listed in the
dimension tables have subunits standardized for both metric and inch systems (including J series). (Refer to
Diagram 2)
Subunit dimensions
E : Outer ring (cup)

nominal small-end diameter
: Nominal contact angle
Diagram 2.
B-131
Table 1 (continued)
Type
Characteristics
(4) Concerning ET and 4T
Types ET and 4T tapered roller bearings are made of high-purity case hardened steel and are manufactured with
a special heat treatment developed by NTN. As a result, wear life and reliability have been improved to where life
coefficient, a2, values can be applied as follows:
4T tapered roller bearings:a2 1.4
ET tapered roller bearings:a2 1.9
Furthermore, although not listed in the dimension tables, ET type bearings are also manufactured for some extra
small bearing sizes. For details, consult NTN Engineering.
Single row tapered

roller bearings
(5) These bearings are constructed to have a high capacity for radial loads,
axial loads, and combined loads. The larger the contact angle, the
greater the axial load capacity becomes. When a pure radial load is
placed on the bearings, an induced load in the axial direction is also
generated, and so these bearings are generally used in pairs arranged
face to face.
(6) When used in pairs, proper internal clearances and preload can be set by
adjusting the distance between the two bearings' inner and outer rings.
(7) Inner and outer rings are separable, enabling them to be installed
individually with the desired interference fit.
(8) Tapered roller bearings are also manufactured with flanges attached to
the outer rings. For more details, contact NTN Engineering. (Refer to
Diagram 3)
Diagram 3.
(1) Outward facing types (using double row outer rings) and inward facing
types (using double row inner rings) are both available, and they have
been adjusted so that each type's internal clearance values are fixed.
Therefore, only parts with identical manufacturing numbers can be
used and they must be assembled according to their code numbers.
(Refer to Diagram 4)
Double row tapered
roller bearings
(2) The axial internal clearances for double and duplex bearings are
listed in Table 8 on pages A-58, 59.
(3) Pairs of duplex single row tapered roller bearings are also
manufactured. For more details, contact NTN Engineering.
Inward facing Outward facing

Diagram 4.
(1) As shown in Diagram 5, four row tapered roller bearings are

constructed of two double row inner rings and two double row outer
rings.
Four row tapered
roller bearings
(2) Bearings wear life is greatly improved through the use of induction
hardening and, for large-sized bearings, hollow rollers and pin type
cages.
(3) Used primarily where heavy load capacity is important, and in the
roller necks of rolling mills.
Diagram 5.
B-132
2. Standard cage type

In general, pressed cages are used in tapered roller
bearings.
However, for large sized bearings, machined or pin type
cages are also used; and for small sized bearings, molded
resin cages are also used.
Single row and
back-to-back arrangement: 0.0005rad1.5'
Face-to-face: 0.001rad 3.5'
In situations where large displacement is necessary,
B-133

Inch Tapered Roller Bearings index
Series
number
Cone or cup number

is between
Page of bearing
dimension table
Series
number
Cone or cup number

is between
Page of bearing
dimension table
335
4T-3324T-344
B-165,167,169
2700
4T-27204T-2793
B-163,165,167
355
4T-350A4T-359S
B-167,169,171
2800
4T-28204T-2879
B-163
365
4T-3624T-370A
B-171,173,175
2900
4T-29244T-2984
B-171
385
4T-382A4T-389A
B-171,173,175,177
3100
4T-31204T-3196
B-161,163
395
4T-3904T-399A
B-173,177,179,181
3300
4T-33204T-3386
B-165,167
415
4T-4144T-420
B-167
3400
4T-34204T-3490
B-163,165,167
435
4T-4324T-438
B-169,171
3500
4T-35204T-3586
B-167,169,171
455
4T-453A4T-469
B-169,171,175,177
4T-JS35104T-JS3549A
B-165
475
4T-4724T-484
B-179,181,183
3700
4T-37204T-3782
B-169,171,173,175
495
4T-492A4T-498
B-183,185,187
3800
4T-38204T-3880
B-165,167,169
525
4T-5224T-529
B-169,171,175
3900
4T-39204T-3994
B-175,177,179,181
535
4T-532A4T-543
B-167,175
4T-A40504T-A4138
B-157
555
4T-5224T-560S
B-175,177,179,181
4300
4T-43354T-4395
B-169
565
4T-5634T-568
B-179,181
5300
4T-53354T-5395
B-173
575
4T-5724T-582
B-183,185
5500
4T-55354T-5584
B-175,179
595
4T-592A4T-598A
B-185,187,189
5700
4T-57354T-5760
B-183
615
4T-6124T-623
B-175,177
4T-A60754T-A6157
B-157
635
4T-6324T-644
B-179,181,183
6200
4T-62204T-6277
B-171
655
4T-6524T-665
B-181,183,185,187
6300
4T-63204T-6386
B-181
675
4T-6724T-687
B-187,189
6400
4T-64204T-6461A
B-183,185
745
4T-7404T-749A
B-181,183,185,187
6500
4T-65354T-6580
B-185,187
755
4T-7524T-760
B-185,187
02400
4T-024204T-02476
B-161,163
775
4T-7724T-782
B-189
02800
4T-028204T-02878
B-161,163
795
4T-7924T-799A
B-191
03000
4T-030624T-03162
B-157
835
4T-8324T-850
B-181,185,187
05000
4T-050624T-05185
B-157
855
4T-8544T-861
B-189
07000
4T-070794T-07204
B-157,159
895
4T-8924T-898
B-193
09000
4T-090624T-09196
B-157
935
4T-9324T-941
B-189
11000
4T-111624T-11315
B-167
1200
4T-12204T-1280
B-159
11500
4T-115204T-11590
B-157
1300
4T-13284T-1380
B-157
LM11700
4T-LM117104T-LM11749 B-157
1700
4T-17294T-1780
B-157,159
LM11900
4T-LM119104T-LM11949 B-157
1900
4T-19304T-1985
B-159,161
12000
4T-121754T-12303
B-169
2400
4T-24204T-2474
B-161
12500
4T-125204T-12580
B-157
2500
4T-25204T-2585
B-161,163
M12600
4T-M126104T-M12649
B-157
2600
4T-26314T-2690
B-159,161
LM12700
JS3500
A4000
A6000
B-134
4T-LM127114T-LM12749 B-157

Series
number
Cone or cup number

is between
13000
4T-136214T-13687
13800
Series
number
Cone or cup number

is between
B-165
39500
4T-395204T-39590
B-175,177,179,181
4T-138304T-13889
B-165
41000
4T-411254T-41286
B-161
14000
4T-141164T-14276
B-161,163,165
42000
4T-423464T-42584
B-187,189
15000
4T-151004T-15245
B-159,161,163
42600
4T-426204T-42690
B-183,185
15500
4T-155204T-15590
B-159,161
43000
4T-431314T-43312
B-163
16000
4T-161374T-16284
B-163,165
44000
4T-441434T-44348
B-165,167
17000
4T-171184T-17244
B-161
L44600
4T-L446104T-L44649
B-159
17500
4T-175204T-17580
B-157
45200
4T-452204T-45289
B-171,173,175,177
18500
4T-185204T-18590
B-167
L45400
4T-L454104T-L45449
B-161
18600
4T-186204T-18690
B-169,171
46000
4T-461624T-46368
B-169
18700
4T-187204T-18790
B-173
46700
4T-467204T-46790
B-193
19000
4T-191504T-19281
B-165
47400
4T-474204T-47490
B-181
21000
4T-210754T-21212
B-157
47600
4T-476204T-47686
B-183,185
22700
4T-227204T-22780
B-169
47800
4T-478204T-47896
B-187,189
23000
4T-231004T-23256
B-159
48200
4T-482204T-48290
B-191
24700
4T-247204T-24780
B-167
48300
4T-483204T-48393
B-193
25500
4T-255194T-25592
B-167,169,171
4T-LM485104T-LM48548A
B-163
25800
4T-258204T-25880
B-163,165
48600
4T-486204T-48685
B-193
26800
4T-268204T-26885
B-165,167,169
49500
4T-495204T-49585
B-175
27600
4T-276204T-27691
B-185
52000
4T-523754T-52400
B-189
27800
4T-278204T-27880
B-167
53000
4T-531624T-53377
B-169
28000
4T-281504T-28315
B-167
55000C
4T-55175C4T-55443
B-171,173,175
28500
4T-285214T-28584
B-173,175
56000
4T-564254T-56650
B-189
28600
4T-286224T-28682
B-173,177
59000
4T-592004T-59412
B-175
28900
4T-289204T-28995
B-179
64000
4T-644334T-64700
B-191
29500
4T-295204T-29590
B-177,179,181
65000
4T-652374T-65500
B-179
29600
4T-296204T-29688
B-181,183
63500
4T-653204T-65390
B-173
4T-LM297104T-LM29748
B-165
66000
4T-662004T-66462
B-175,177
31500
4T-315204T-31597
B-165
66500
4T-665204T-66589
B-175,177
33000
4T-332254T-33462
B-177,181,183
LM67000
4T-LM670104T-LM67048
B-161
33800
4T-338214T-33895
B-169,173,175
67300
4T-673324T-67391
B-191,193
34000
4T-342744T-34478
B-181,183,185
67700
4T-677204T-67790
B-193
36600
4T-366204T-36691
B-193
68000
4T-684504T-68712
B-191
36900
4T-369204T-36990
B-193
L68100
4T-L681114T-L68149
B-165
37000
4T-374254T-37625
B-189
L69300
4T-JL693104T-JL69349
B-165
LM29700
Page of bearing
dimension table
LM48500
B-135
Page of bearing
dimension table

Series
number
71000
Cone or cup number

is between
Page of bearing
dimension table
Series
number
Cone or cup number

is between
Page of bearing
dimension table
4T-714534T-71750
B-191
H414200
4T-H4142104T-H414249
B-181,183
4T-72188C4T-72487
B-173,175,177
H415600
4T-JH4156104T-JH415647
B-183
4T-LM728104T-LM72849
B-159
L432300
4T-L4023104T-L432349
B-193
74000
4T-745004T-74850
B-191,193
LM501300
4T-LM5013104T-LM501349
B-167
78000
4T-782254T-78551
B-177,179
LM503300
4T-LM5033104T-LM503349A
B-171
4T-78214C4T-78551
B-175
HH506300
4T-HH5063104T-HH506349
B-173
4T-LM78310A4T-LM78349A
B-165
LM506800
4T-JLM5068104T-JLM506849
B-175
M84500
4T-M845104T-M84548
B-159
LM508700
4T-JLM5087104T-JLM508748
B-177
M86600
4T-M866104T-M86649
B-159,161
M511900
4T-JM5119104T-JM511946
B-179
M88000
4T-M880104T-M88048
B-163
M515600
4T-JM5156104T-JM515649
B-185
HM88500
4T-HM885104T-HM88547
B-161,163
HM516400
4T-HM5164104T-HM516448
B-183,185
HM88600
4T-HM886104T-HM88649
B-163,165
HM516800
4T-JHM5168104T-JHM516849
B-187
HM89200
4T-HM892104T-HM89249
B-165
LM522500
4T-LM5225104T-LM522548
B-189
HM89400
4T-HM894104T-HM89499
B-163,165
HM522600
4T-JHM5226104T-JHM522649
B-191
90000
4T-J903544T-J90748
B-187,189
HM534100
4T-JHM5341104T-JHM534149
B-193
95000
4T-954754T-95925
B-191,193
LM603000
4T-LM6030114T-LM603049
B-171
97000
4T-975004T-97900
B-191
L610500
4T-L6105104T-L610549
B-179
99000
4T-991004T-99575
B-193
M612900
4T-JM6129104T-JM612949
B-181
LM102900
4T-LM1029104T-LM102949
B-171
HM61700
4T-HM6170104T-HM617049
B-187
LM104900
4T-JLM1049104T-LM104949
B-173
L630300
4T-L6303104T-L630349
B-193
M205100
4T-JM2051104T-JM205149
B-173
LL639200
4T-LL6392104T-LL639249
B-193
M207000
4T-JM2070104T-JM207049
B-177
LM704600
4T-JLM7046104T-JLM704649
B-173
H211700
4T-JH2117104T-JH211749
B-181
LM710900
4T-JLM7109104T-JLM710949
B-179
HM212000
4T-HM2120104T-HM212049
B-179,181
LM714100
4T-JLM7141104T-JLM714149
B-183
4T-L2178104T-L217849
B-187
M714200
4T-JM7142104T-JM714249
B-183
LL217800
4T-LL2178104T-LL217849
B-187
H715300
4T-H7143114T-H715348
B-179,181,183
HM218200
4T-HM2182104T-HM218248
B-187
M716600
4T-JM7166104T-JM716648
B-187
HH221400
4T-HH2214104T-HH221449A
B-185,189
M718100
4T-JM7181104T-JM718149
B-187
HH224300
4T-HH2243104T-HH224346
B-189,191
M719100
4T-JM7191134T-JM719149
B-187
HH228300
4T-HH2283104T-HH228349
B-191
M720200
4T-JM7202104T-JM720249
B-189
4T-M2316104T-M231648
B-193
L724300
4T-JL7243144T-JL724348
B-191
LM300800
4T-LM3008114T-LM300849
B-167
M736100
4T-JM7361104T-JM736149
B-193
H307700
4T-JH3077104T-JH307749
B-177
M738200
4T-JM7382104T-JM738249A
B-193
4T-JHM3184104T-JHM318448
B-187
HM801300
4T-HM8013104T-HM801349
B-167
4T-L3272104T-L327249
B-191
M802000
4T-M8020114T-M802048
B-169
72000C
LM728000
78000C
LM78300
L217800
M231600
HM318400
L327200
B-136

Series
number
HM803100
Cone or cup number

is between
Page of bearing
dimension table
4T-HM8031104T-HM803149
B-169
4T-M8040104T-M804048
B-171
HM804800
4T-HM8048104T-HM804849
B-169,173
LM806600
4T-LM8066104T-LM806649
B-175
HM807000
4T-HM8070104T-HM807049
B-171,173,175
4T-L8121114T-L812148
B-181
LM813000
4T-JLM8130104T-JLM813049
B-181
HM813800
4T-HM8138104T-HM813844
B-177,179,181
4T-L8147104T-L814749
B-183
LM814800
4T-LM8148104T-LM814849
B-185
M822000
4T-JM8220104T-JM822049
B-191
HM903200
4T-HM9032104T-HM903249
B-169
4T-M9033104T-M903345
B-169
HM907600
4T-HM9076144T-HM907643
B-175
HM911200
4T-HM9112104T-HM911245
B-175,179
H913800
4T-H9138104T-JH913848
B-177,179,183
H917800
4T-H9178104T-H917840
B-185
H924000
4T-H9240104T-H924045
B-191
4T-HM9267104T-HM926747
B-191
M804000
L812100
L814700
M903300
HM926700
How to use the Index

For example, when accessing the dimension tables with the bearing numbers 4T-HM911244 and 4THM911216, we see that the inner ring and outer ring bearing numbers are in the range 4T-HM911210
4T-HM911245. Therefore, information about this bearing will be on either page B-175 or B-179.
B-137

Metric system sizes
T
r1
r
B
d
d 1530mm
Boundary dimensions
dynamic
mm
d
Basic load ratings

static
dynamic
kN
rs min
r ls min
Limiting speeds
static
kgf
Bearing
numbers
rpm
Cr
Cor
Cr
Cor
grease
oil
15
42
14.25
13
11
23.2
20.8
2,370
2,120
9,900
13,000
4T-30302
17
40
40
40
47
13.25
17.25
17.25
15.25
12
16
16
14
11
14
14
12
1
1
1
1
1
1
1
1
20.5
27.3
26.2
28.9
20.3
28.3
28.2
26.3
2,090
2,790
2,670
2,940
2,070
2,880
2,870
2,680
9,900
9,900
9,900
9,000
13,000
13,000
13,000
12,000
4T-30203
4T-32203
2
4T-32203R
4T-30303
20
42
47
47
52
52
52
15
15.25
19.25
16.25
16.25
22.25
15
14
18
16
16
21
12
12
15
13
12
18
0.6
1
1
1.5
1.5
1.5
0.6
1
1
1.5
1.5
1.5
24.9
28.2
36.5
35.5
31.0
46.5
27.9
28.7
39.5
34.0
31.0
48.5
2,540
2,870
3,700
3,600
3,150
4,750
2,840
2,930
4,000
3,450
3,150
4,950
9,500
8,800
8,800
8,000
7,600
8,000
13,000
12,000
12,000
11,000
10,000
11,000
4T-32004X
4T-30204
4T-32204
4T-30304A
4T-30304CA
4T-32304
22
44
15
15
11.5
0.6
0.6
27.0
31.5
2,760
3,250
8,900
12,000
4T-320/22X
25
47
47
52
52
52
52
52
52
62
62
62
62
15
17
16.25
19.25
19.25
19.25
19.25
22
18.25
18.25
18.25
25.25
15
17
15
18
18
18
18
22
17
17
17
24
11.5
14
13
16
15
15
15
18
15
14
13
20
0.6
0.6
1
1
1
1
1
1
1.5
1.5
1.5
1.5
0.6
0.6
1
1
1
1
1
1
1.5
1.5
1.5
1.5
27.8
32.5
31.5
42.0
38.0
38.0
34.5
47.5
48.5
41.5
40.5
61.5
33.5
40.5
34.0
47.0
43.0
46.5
42.0
57.5
47.5
41.5
43.5
64.5
2,830
3,300
3,200
4,300
3,850
3,900
3,500
4,850
4,950
4,250
4,150
6,250
3,450
4,150
3,450
4,800
4,400
4,750
4,250
5,850
4,850
4,250
4,450
6,600
7,900
8,000
7,300
7,300
7,300
7,100
7,100
7,300
6,700
6,400
5,900
6,700
11,000
11,000
9,800
9,800
9,800
9,400
9,400
9,800
8,900
8,500
7,800
8,900
4T-32005X
4T-33005
4T-30205
4T-32205
2
4T-32205R
4T-32205C
2
4T-32205CR
4T-33205
4T-30305
4T-30305C
4T-30305D
4T-32305
28
52
58
16
24
16
24
12
19
1
1
1
1
33.0
58.0
40.5
69.5
3,400
5,950
4,150
7,100
7,300
6,700
9,700
8,900
4T-320/28X
4T-332/28
30
55
55
62
62
62
62
72
17
20
17.25
21.25
21.25
25
20.75
17
20
16
20
20
25
19
13
16
14
17
17
19.5
16
1
1
1
1
1
1
1.5
1
1
1
1
1
1
1.5
37.5
42.5
43.5
54.5
50.0
65.0
60.0
46.0
54.0
48.0
64.0
60.0
77.0
61.0
3,800
4,300
4,450
5,600
5,100
6,600
6,100
4,700
5,500
4,900
6,550
6,100
7,850
6,200
6,900
6,900
6,300
6,300
6,100
6,300
5,700
9,200
9,200
8,400
8,400
8,100
8,400
7,600
4T-32006X
4T-33006
4T-30206
4T-32206
4T-32206C
4T-33206
4T-30306

2 This bearing does not incorporate the subunit dimensions.
B-138
Sb
Sa
r 1a
dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X Y X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

For values of e, Y2 and Yo
Dimensions
series to
ISO
Load Constant
center
mm
mm
da
db
min
max
Da
Axial
load factors
kg
Db
Sa
Sb
ras
r1as
min
min
max
max
Y2
Yo
max
min
min
Mass
(approx.)
2FB
20.5
22
36.5
35
38
9.5
0.29
2.11
1.16
0.098
2DB
2DD
22.5
22.5
22.5
22.5
23
23
22
24
34.5
34.5
34.5
41.5
33
33
33
40
37
37
36.5
42
2
2
2
3
2
3
3
3.5
1
1
1
1
1
1
1
1
9.5
11.5
11
10.5
0.35
0.31
0.35
0.29
1.74
1.92
1.74
2.11
0.96
1.06
0.96
1.16
0.08
0.102
0.104
0.134
2FD
24.5
25.5
25.5
28.5
28.5
28.5
25
27
26
28
27.5
27
37.5
41.5
41.5
43.5
43.5
43.5
36
40
39
42.5
39.5
43
39
44
43
47.5
48
47
3
2
2
3
3
3
3
3
4
3
4
4
0.6
1
1
1.5
1.5
1.5
0.6
1
1
1.5
1.5
1.5
10.5
11.5
12.5
10.5
13.5
14
0.37
0.35
0.33
0.30
0.55
0.30
1.60
1.74
1.81
2.00
1.10
2.00
0.88
0.96
1.00
1.10
0.60
1.10
0.097
0.127
0.16
0.176
0.17
0.245
3CC
26.5
27
39.5
38
41
3.5
0.6
0.6
11
0.40
1.51
0.83
0.106
4CC
2CE
3CC
2CD
7FB
2FD
29.5
29.5
30.5
30.5
30.5
30.5
30.5
30.5
33.5
33.5
33.5
33.5
30
29
31
31
31
30
30
30
34
34
34
32
42.5
42.5
46.5
46.5
46.5
46.5
46.5
46.5
53.5
53.5
53.5
53.5
40
40
44
43
43
42
42
43
52
48
45.5
52
44
43.5
48
48
48
49
49
49
57
58
58.5
57
3
3
2
2
2
2
2
4
3
3
3
3
3.5
3
3
4
4
4
4
4
3
4
5
5
0.6
0.6
1
1
1
1
1
1
1.5
1.5
1.5
1.5
0.6
0.6
1
1
1
1
1
1
1.5
1.5
1.5
1.5
12
11
12.5
14
13.5
16
16
14
13
16
20
16
0.43
0.29
0.37
0.36
0.37
0.58
0.55
0.35
0.30
0.55
0.83
0.30
1.39
2.07
1.60
1.67
1.60
1.03
1.10
1.71
2.00
1.10
0.73
2.00
0.77
1.14
0.88
0.92
0.88
0.57
0.60
0.94
1.10
0.60
0.40
1.10
0.114
0.13
0.154
0.187
0.181
0.19
0.19
0.217
0.272
0.264
0.284
0.381
4CC
2DE
33.5
33.5
33
34
46.5
52.5
45
49
49
55
3
5
4
5
1
1
1
1
12.5
15.5
0.43
0.34
1.39
1.77
0.77
0.97
0.146
0.293
4CC
2CE
3DB
3DC
5DC
2DE
2FB
35.5
35.5
35.5
35.5
35.5
35.5
38.5
35
35.5
37
37
35
36
40
49.5
49.5
56.5
56.5
56.5
56.5
63.5
48
46.5
53
52
49
53
62
52
52
57
58
59.5
59
66
3
3
2
2.5
2
5
3
4
4
3
4
5
5.5
4.5
1
1
1
1
1
1
1.5
1
1
1
1
1
1
1.5
13.5
13
13.5
15.5
18.5
16
15
0.43
0.29
0.37
0.37
0.56
0.34
0.31
1.39
2.06
1.60
1.60
1.07
1.76
1.90
0.77
1.13
0.88
0.88
0.59
0.97
1.05
0.166
0.201
0.241
0.301
0.294
0.344
0.408
2FB
3CC
2DB
2DD
2FB
5CD
2DE
2FB
1ETNTN
B-139

Metric system sizes
T
r1
r
B
d
d 3045mm
Boundary dimensions
dynamic
mm
d
kN
1
Limiting speeds
static
kgf
Bearing
numbers
rpm
Cr
Cor
Cr
Cor
grease
1.5
1.5
1.5
1.5
1.5
58.5
48.5
81.0
79.0
70.0
58.5
51.5
90.0
94.0
88.5
6,000
4,950
8,250
8,050
7,150
5,950
5,250
9,150
9,550
9,050
5,500
5,000
5,700
5,500
5,500
4T-30306CA
7,300
4T-30306D
6,700
4T-32306
7,600
7,300 4T-32306C
2
4T-32306CR
7,300
1
1
1.5
1
1
1.5
37.0
70.5
84.0
46.5
85.0
102
3,750
7,200
8,600
4,750
8,650
10,400
6,600
6,000
5,200
8,700
8,000
6,900
4T-320/32X
4T-332/32
4T-323/32C
11.5
14
17
15
19
19
18
22
18
17
15
25
25
0.6
1
1
1.5
1.5
1.5
1.5
1.5
2
2
2
2
2
0.6
1
1
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
27.4
41.5
50.5
55.5
72.5
68.0
62.0
87.5
75.0
66.5
63.5
101
93.0
37.5
52.5
66.5
61.5
87.0
85.5
78.5
109
77.0
68.5
70.0
115
117
2,790
4,250
5,150
5,650
7,400
6,950
6,300
8,900
7,650
6,750
6,450
10,300
9,500
3,850
5,350
6,800
6,250
8,900
8,750
8,000
11,200
7,900
7,000
7,100
11,700
12,000
6,800
6,100
6,100
5,500
5,500
5,300
5,300
5,500
5,000
4,800
4,400
5,000
4,800
9,000
8,100
8,100
7,400
7,400
7,100
7,100
7,400
6,600
6,400
5,800
6,600
6,400
32907XU
4T-32007X
4T-33007
4T-30207
4T-32207
4T-32207C
2
4T-32207CR
4T-33207
4T-30307
4T-30307C
4T-30307D
4T-32307
4T-32307C
15
19
22
26
18
23
32
32.5
23
23
23
33
33
12
14.5
18
20.5
16
19
25
28
20
19
17
27
27
0.6
1
1
1.5
1.5
1.5
1.5
2.5
2
2
2
2
2
0.6
1
1
1.5
1.5
1.5
1.5
2
1.5
1.5
1.5
1.5
1.5
32.5
50.0
59.5
79.5
61.0
79.5
103
118
91.5
83.0
77.0
122
110
48.0
65.5
82.5
103
67.0
93.5
132
144
102
87.0
85.5
150
140
3,350
5,100
6,050
8,100
6,250
8,100
10,500
12,000
9,350
8,450
7,850
12,500
11,300
4,900
6,650
8,400
10,500
6,850
9,550
13,400
14,700
10,400
8,900
8,700
15,300
14,300
5,900
5,300
5,300
5,200
4,900
4,900
4,900
4,600
4,400
4,200
3,900
4,400
4,200
7,800
7,100
7,100
6,900
6,600
6,600
6,600
6,200
5,900
5,600
5,200
5,900
5,600
32908XU
4T-32008X
4T-33008
4T-33108
4T-30208
4T-32208
4T-33208
4T-T2EE040
4T-30308
4T-30308C
4T-30308D
32308U
4T-32308C
15
12
0.6
0.6
33.5
51.5
3,450
5,250
5,300
7,000
32909XU
rs min
30
72
72
72
72
72
20.75
20.75
28.75
28.75
28.75
19
19
27
27
27
15
14
23
23
23
1.5
1.5
1.5
1.5
1.5
32
58
65
75
17
26
29.75
17
26
28
13
20.5
23
35
55
62
62
72
72
72
72
72
80
80
80
80
80
14
18
21
18.25
24.25
24.25
24.25
28
22.75
22.75
22.75
32.75
32.75
14
18
21
17
23
23
23
28
21
21
21
31
31
40
62
68
68
75
80
80
80
85
90
90
90
90
90
15
19
22
26
19.75
24.75
32
33
25.25
25.25
25.25
35.25
35.25
68
15
45
Basic load ratings

static
dynamic
r ls min
oil
1 Minimal allowable dimension for chamfer dimension r or r1. 2 This bearing does not incorporate the subunit dimensions.
Note: When selecting bearings with bearing numbers marked with "", please consult NTN Engineering.
B-140
Sb
Sa
r 1a
dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X Y X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Dimensions
series to
ISO

mm
da
db
min
max
max
7FB
2FD
5FD
38.5
38.5
38.5
38.5
38.5
39.5
39
38
37
37
4CC
2DE
5FD
37.5
37.5
40.5
2BD
4CC
2CE
3DB
3DC
5DC
2DE
2FB
7FB
2FE
5FE
2BC
3CD
2BE
2CE
3DB
3DC
2DE
2EE
2FB
7FB
2FD
5FD
2BC
Load Constant
center
mm
Da
Axial
load factors
Mass
kg
Db
Sa
Sb
ras
r1as
min
min
min
min
max
max
Y2
Yo
63.5
63.5
63.5
63.5
63.5
57
55
59
57
57
67
68
66
68
67.5
3
3
3
2
2
5.5
6.5
5.5
5.5
5.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
17.5
23.5
18.5
23
23
0.47
0.83
0.31
0.55
0.61
1.27
0.73
1.90
1.10
0.99
0.70
0.40
1.05
0.60
0.54
0.398
0.398
0.583
0.592
0.594
38
38
39
52.5
59.5
66.5
50
55
61
55
62
71
3
5
3
4
5.5
6.5
1
1
1.5
1
1
1.5
14.5
17
23
0.45
0.35
0.55
1.32
1.73
1.10
0.73
0.95
0.60
0.181
0.395
0.659
39.5
40.5
40.5
43.5
43.5
43.5
43.5
43.5
45
45
45
45
45
40
40
40.5
44
43
42
42
42
45
44
44
43
43
50.5
56.5
56.5
63.5
63.5
63.5
63.5
63.5
71.5
71.5
71.5
71.5
71.5
48
54
52
62
61
59
59
61
70
63.5
62
66
66
52.5
59
59
67
67
68
68
68
74
75.5
76.5
74
76
2.5
4
3
3
3
3
3
5
3
3
3
3
3
2.5
4
4
3
5
6
6
6
4.5
5.5
7.5
7.5
7.5
0.6
1
1
1.5
1.5
1.5
1.5
1.5
2
2
2
2
2
0.6
1
1
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
10.5
15.5
14
15
17.5
21.5
20.5
18.5
17
20.5
26
20.5
25
0.29
0.45
0.31
0.37
0.37
0.58
0.55
0.35
0.31
0.55
0.83
0.31
0.55
2.06
1.32
1.97
1.60
1.60
1.03
1.10
1.70
1.90
1.10
0.73
1.90
1.10
1.13
0.73
1.08
0.88
0.88
0.57
0.60
0.93
1.05
0.60
0.40
1.05
0.60
0.121
0.224
0.263
0.344
0.457
0.461
0.461
0.531
0.540
0.517
0.530
0.787
0.797
44.5
45.5
45.5
48.5
48.5
48.5
48.5
52
50
50
50
50
50
45.5
46
46
47
49
48
47
48
52
50
50
50
48
57.5
62.5
62.5
66.5
71.5
71.5
71.5
75
81.5
80
81.5
81.5
81.5
54
60
60
65
69
68
67
70
77
72
71
73
72
58.5
65
64
71
75
75
76
80
82
85.5
86.5
82
84
3
4
2.5
4
3
3
5
5
3
3.5
3
3
3
3
4.5
4
5.5
3.5
5.5
7
5
5
6
8
8
8
0.6
1
1
1.5
1.5
1.5
1.5
2
2
2
2
2
2
0.6
1
1
1.5
1.5
1.5
1.5
2
1.5
1.5
1.5
1.5
1.5
11.5
15
15
18
16.5
19
21
22.5
19.5
23
29.5
23
27.5
0.29
0.38
0.28
0.36
0.37
0.37
0.36
0.34
0.35
0.55
0.83
0.35
0.55
2.07
1.58
2.12
1.69
1.60
1.60
1.68
1.74
1.74
1.10
0.73
1.74
1.10
1.14
0.87
1.17
0.93
0.88
0.88
0.92
0.96
0.96
0.60
0.40
0.96
0.60
0.161
0.273
0.312
0.494
0.435
0.558
0.728
0.907
0.769
0.728
0.738
1.08
1.1
50
50
63.5
59.5
64.5
0.6
0.6
12
0.32
1.88
1.04
0.188
1ETNTN
B-141
(approx.)

Metric system sizes
T
r1
r
B
d
d 4560mm
Boundary dimensions
dynamic
mm
d
kN
1
grease
57.5
66.0
84.5
67.5
82.0
107
111
96.0
154
76.5
93.5
115
78.5
100
141
126
109
191
5,850
6,750
8,650
6,900
8,350
10,900
11,300
9,800
15,700
7,800
9,550
11,700
8,000
10,200
14,400
12,800
11,100
19,500
4,800
4,800
4,700
4,400
4,400
4,400
4,000
3,500
4,000
6,400
6,400
6,200
5,900
5,900
5,900
5,300
4,600
5,300
4T-32009X
4T-33009
4T-33109
4T-30209
4T-32209
4T-33209
4T-30309
4T-30309D
32309U
0.6
0.6
1
1
1.5
1.5
1.5
1.5
2.5
3
2
2
2
35.5
31.5
62.5
69.5
86.5
77.0
87.5
115
151
107
133
113
184
57.0
50.5
88.0
103
121
93.0
109
158
190
132
152
130
232
3,650
3,200
6,400
7,100
8,850
7,850
8,900
11,700
15,400
10,900
13,500
11,600
18,700
5,800
5,150
9,000
10,500
12,400
9,450
11,100
16,100
19,400
13,500
15,500
13,300
23,600
4,700
4,700
4,400
4,400
4,200
4,000
4,000
4,000
3,800
3,400
3,600
3,200
3,600
6,300
6,300
5,800
5,800
5,600
5,300
5,300
5,300
5,100
4,500
4,800
4,200
4,800
32910XU
2
32910
4T-32010X
4T-33010
4T-33110
4T-30210
4T-32210
4T-33210
4T-T2ED050
4T-T7FC050
4T-30310
4T-30310D
32310U
1
1.5
1.5
1.5
2
2
2
2.5
2.5
2.5
1
1.5
1.5
1.5
1.5
1.5
1.5
2
2
2
44.5
80.5
91.5
111
93.0
108
138
155
132
215
73.5
118
138
155
111
134
188
179
154
275
4,550
8,200
9,350
11,300
9,500
11,000
14,100
15,800
13,500
21,900
7,500
12,000
14,100
15,800
11,300
13,700
19,100
18,300
15,700
28,000
4,300
4,000
4,000
3,900
3,600
3,600
3,600
3,300
2,900
3,300
5,700
5,400
5,400
5,200
4,900
4,900
4,900
4,400
3,800
4,400
32911XU
4T-32011X
4T-33011
4T-33111
4T-30211
4T-32211
4T-33211
4T-30311
4T-30311D
32311U
1
1.5
1.5
1.5
1
1.5
1.5
1.5
51.0
82.0
93.5
113
83.0
123
145
164
5,200
8,350
9,550
11,600
8,450
12,500
14,700
16,700
4,000
3,700
3,700
3,600
5,300
4,900
4,900
4,700
32912XA
4T-32012X
4T-33012
4T-33112
1
1
1.5
1.5
1.5
1.5
2
2
2
1
1
1.5
1.5
1.5
1.5
1.5
1.5
1.5
15
14
20
24
26
20
23
32
35
29
27
27
40
12
12
15.5
19
20
17
19
24.5
30
22
23
19
33
0.6
0.6
1
1
1.5
1.5
1.5
1.5
2.5
3
2.5
2.5
2.5
17
23
27
30
22.75
26.75
35
31.5
31.5
45.5
17
23
27
30
21
25
35
29
29
43
14
17.5
21
23
18
21
27
25
21
35
17
23
27
30
17
23
27
30
14
17.5
21
23
45
75
75
80
85
85
85
100
100
100
20
24
26
20.75
24.75
32
27.25
27.25
38.25
20
24
26
19
23
32
25
25
36
50
72
72
80
80
85
90
90
90
100
105
110
110
110
15
15
20
24
26
21.75
24.75
32
36
32
29.25
29.25
42.25
55
80
90
90
95
100
100
100
120
120
120
60
85
95
95
100
rpm
Cor
15.5
19
20.5
16
19
25
22
18
30
kgf
Bearing
numbers
Cr
r ls min
Limiting speeds
static
Cor
rs min
Basic load ratings

static
dynamic

Cr
B-142
oil
Sb
Sa
r 1a
dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X Y X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Dimensions
series to
ISO
Load Constant
center
mm
mm
da
db
min
max
Da
Axial
load factors
Mass
kg
Db
Sa
Sb
ras
r1as
min
min
max
max
Y2
Yo
(approx.)
max
min
min
67
67
69
74
73
72
86
79
82
72
71
77
80
81
81
93
96
93
4
4
4
3
3
5
3
3
3
4.5
5
5.5
4.5
5.5
7
5
9
8
1
1
1.5
1.5
1.5
1.5
2
2
2
1
1
1.5
1.5
1.5
1.5
1.5
1.5
1.5
16.5
16
19.5
18
20
22
21
32.5
25.5
0.39
0.29
0.38
0.40
0.40
0.39
0.35
0.83
0.35
1.53
2.04
1.57
1.48
1.48
1.56
1.74
0.73
1.74
0.84
1.12
0.86
0.81
0.81
0.86
0.96
0.40
0.96
0.346
0.398
0.542
0.495
0.607
0.783
1.01
0.958
1.46
3CC
2CE
3CE
3DB
3DC
3DE
2FB
7FB
2FD
50.5
50.5
53.5
53.5
53.5
53.5
55
55
55
51
51
52
54
53
52
59
56
56
69.5
69.5
71.5
76.5
76.5
76.5
91.5
91.5
91.5
2BC
3CC
2CE
3CE
3DB
3DC
3DE
2ED
7FC
2FB
7FB
2FD
54.5
54.5
55.5
55.5
58.5
58.5
58.5
58.5
62
64
62
62
62
55
55
56
56
56
58
58
57
59
60
65
62
62
67.5
67.5
74.5
74.5
76.5
81.5
81.5
81.5
88
91
100
100
100
63.5
63.5
72
72
74
79
78
77
84
78
95
87
90
69
69.5
77
76
82
85
85
87
94
100
102
105
102
3
3
4
4
4
3
3
5
6
4
3
3
3
3
3
4.5
5
6
4.5
5.5
7.5
6
10
6
10
9
0.6
0.6
1
1
1.5
1.5
1.5
1.5
2
2.5
2
2
2
0.6
0.6
1
1
1.5
1.5
1.5
1.5
2
2.5
2
2
2
13.5
14.5
17.5
17.5
20.5
19.5
21
23.5
25.5
36.5
23
35
28.5
0.34
0.36
0.42
0.32
0.41
0.42
0.42
0.41
0.34
0.87
0.35
0.83
0.35
1.76
1.67
1.42
1.90
1.46
1.43
1.43
1.45
1.75
0.69
1.74
0.73
1.74
0.97
0.92
0.78
1.04
0.80
0.79
0.79
0.80
0.96
0.38
0.96
0.40
0.96
0.191
0.192
0.366
0.433
0.58
0.563
0.648
0.852
1.31
1.23
1.31
1.25
1.92
2BC
3CC
2CE
3CE
3DB
3DC
3DE
2FB
7FB
2FD
60.5
63.5
63.5
63.5
65
65
65
67
67
67
60.5
63
63
62
64
63
62
71
68
68
74.5
81.5
81.5
86.5
91.5
91.5
91.5
110
110
110
70.5
81
81
83
88
87
85
104
94
99
76.5
86
86
91
94
95
96
111
113
111
3
4
5
5
4
4
6
4
4
4
3
5.5
6
7
4.5
5.5
8
6.5
10.5
10.5
1
1.5
1.5
1.5
2
2
2
2
2
2
1
1.5
1.5
1.5
1.5
1.5
1.5
2
2
2
14.5
20
19.5
22
21
22.5
25.5
24.5
38
30.5
0.31
0.41
0.31
0.37
0.40
0.40
0.40
0.35
0.83
0.35
1.94
1.48
1.92
1.60
1.48
1.48
1.50
1.74
0.73
1.74
1.07
0.81
1.06
0.88
0.81
0.81
0.83
0.96
0.40
0.96
0.274
0.563
0.643
0.846
0.74
0.876
1.15
1.66
1.59
2.44
4CC
2CE
3CE
65.5
68.5
68.5
68.5
65.5
67
67
67
79.5
86.5
86.5
91.5
76.5
85
85
88
82
91
90
96
3
4
5
5
3
5.5
6
7
1
1.5
1.5
1.5
1
1.5
1.5
1.5
15.5
21
20.5
23.5
0.33
0.43
0.33
0.40
1.80
1.39
1.83
1.51
0.99
0.77
1.01
0.83
0.296
0.576
0.684
0.912
B-143

Metric system sizes
T
r1
B
D
d 6075mm
Boundary dimensions
dynamic
mm
d
Basic load ratings

static
dynamic
kN
rs min
r ls min
Cr
Limiting speeds
static
kgf
Cor
B-144
Cr
rpm
Cor
grease
oil
Bearing
numbers
Sb
Sa
r 1a
dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X Y X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Dimensions
series to
ISO
Load Constant
center
mm
mm
da
db
min
max
Da
max
Axial
load factors
Mass
kg
Db
Sa
Sb
ras
r1as
min
min
min
min
max
max
Y2
Yo
(approx.)
3EB
3EC
3EE
2EE
7FC
2FB
7FB
2FD
70
70
70
72
74
74
74
74
70
69
69
70
72
77
73
74
101.5
101.5
101.5
103
111
118
118
118
96
95
93
98
94
112
103
107
103
104
105
109
119
120
124
120
4
4
6
6
4
4
4
4
4.5
5.5
9
7
11
7.5
11.5
11.5
2
2
2
2
2.5
2.5
2.5
2.5
1.5
1.5
1.5
2
2.5
2
2
2
22
25
27.5
28.5
42
26.5
40.5
32
0.40
0.40
0.40
0.33
0.82
0.35
0.83
0.35
1.48
1.48
1.48
1.80
0.73
1.74
0.73
1.74
0.81
0.81
0.82
0.99
0.40
0.96
0.40
0.96
0.949
1.18
1.55
1.86
2
2.06
1.97
3.02
2BC
4CC
2CE
3DE
3EB
3EC
3EE
2GB
7GB
2GD
70.5
73.5
73.5
73.5
75
75
75
79
79
79
70
72
72
73
77
75
74
83
79
80
84.5
91.5
91.5
101.5
111.5
111.5
111.5
128
128
128
80
90
89
96
106
104
102
122
111
117
86.5
97
96
106
113
115
115
130
133
130
3
4
5
6
4
4
7
4
4
4
3
5.5
6
7.5
4.5
5.5
9
8
13
12
1
1.5
1.5
1.5
2
2
2
2.5
2.5
2.5
1
1.5
1.5
1.5
1.5
1.5
1.5
2
2
2
16.5
22.5
21.5
26
23.5
27
29.5
28.5
44
34.5
0.35
0.46
0.35
0.39
0.40
0.40
0.39
0.35
0.83
0.35
1.70
1.31
1.72
1.55
1.48
1.48
1.54
1.74
0.73
1.74
0.93
0.72
0.95
0.85
0.81
0.81
0.85
0.96
0.40
0.96
0.315
0.63
0.732
1.28
1.18
1.58
1.98
2.55
2.42
3.66
2BC
4CC
2CE
3EB
3EC
3EE
7FC
2GB
7GB
2GD
75.5
78.5
78.5
80
80
80
84
84
84
84
75
78
79
81
80
79
82
89
84
86
94.5
101.5
101.5
116.5
116.5
116.5
126
138
138
138
90
98
99
110
108
107
106
130
118
125
96
105
105
118
119
120
135
140
142
140
4
5
5
4
4
7
5
4
4
4
4
6
5.5
5
6
9
12
8
13
12
1
1.5
1.5
2
2
2
2.5
2.5
2.5
2.5
1
1.5
1.5
1.5
1.5
1.5
2.5
2
2
2
18
24
22.5
25.5
28.5
31
47.5
30
47
36.5
0.32
0.43
0.28
0.42
0.42
0.41
0.87
0.35
0.83
0.35
1.90
1.38
2.11
1.43
1.43
1.47
0.69
1.74
0.73
1.74
1.05
0.76
1.16
0.79
0.79
0.81
0.38
0.96
0.40
0.96
0.487
0.848
1.07
1.26
1.68
2.1
2.61
3.06
2.92
4.46
2BC
4CC
2CE
4DB
4DC
3EE
2GB
7GB
80.5
83.5
83.5
85
85
85
89
89
80
83
85
85
85
83
95
91
99.5
106.5
106.5
121.5
121.5
121.5
148
148
94
103
101
115
114
111
139
127
101.5
110
110.5
124
125
125
149
151
4
5
6
4
4
7
4
6
4
6
5.5
5
6
10
9
14
1
1.5
1.5
2
2
2
2.5
2.5
1
1.5
1.5
1.5
1.5
1.5
2
2
19
25.5
23
27
30
32
32
50
0.33
0.46
0.30
0.44
0.44
0.43
0.35
0.83
1.80
1.31
2.01
1.38
1.38
1.40
1.74
0.73
0.99
0.72
1.11
0.76
0.76
0.77
0.96
0.40
0.511
0.909
1.11
1.41
1.74
2.2
3.57
3.47
1ET-4Ta2B-000
2ETNTN
B-145

Metric system sizes
T
r1
r
B
d
d 7595mm
Boundary dimensions
dynamic
mm
d
Basic load ratings

static
dynamic
kN
rs min
Limiting speeds
static
kgf
Bearing
numbers
rpm
r ls min
Cr
Cor
Cr
Cor
grease
oil
75
160
58
55
45
2.5
355
470
36,000
47,500
2,400
3,200
32315U
80
110
125
125
140
140
140
170
170
170
20
29
36
28.25
35.25
46
42.5
42.5
61.5
20
29
36
26
33
46
39
39
58
16
22
29.5
22
28
35
33
27
48
1
1.5
1.5
2.5
2.5
2.5
3
3
3
1
1.5
1.5
2
2
2
2.5
2.5
2.5
72.0
139
173
160
199
250
291
236
395
121
216
284
200
265
365
350
283
525
7,350
14,200
17,600
16,300
20,300
25,500
29,700
24,100
40,500
12,400
22,000
29,000
20,400
27,000
37,500
36,000
28,900
53,500
3,000
2,800
2,800
2,500
2,500
2,500
2,300
2,000
2,300
4,000
3,700
3,700
3,400
3,400
3,400
3,000
2,700
3,000
32916XU
32016XU
33016U
30216U
32216U
33216U
30316U
30316DU
32316U
85
120
130
130
150
150
150
180
180
180
23
29
36
30.5
38.5
49
44.5
44.5
63.5
23
29
36
28
36
49
41
41
60
18
22
29.5
24
30
37
34
28
49
1.5
1.5
1.5
2.5
2.5
2.5
4
4
4
1.5
1.5
1.5
2
2
2
3
3
3
94.0
142
176
183
224
284
305
247
405
157
224
296
232
300
420
365
293
525
9,600
14,400
18,000
18,600
22,900
29,000
31,000
25,200
41,000
16,100
22,900
30,000
23,600
30,500
43,000
37,000
29,900
53,500
2,800
2,600
2,600
2,400
2,400
2,400
2,100
1,900
2,100
3,800
3,500
3,500
3,200
3,200
3,200
2,900
2,500
2,900
32917XU
32017XU
33017U
30217U
32217U
33217U
30317U
30317DU
32317U
90
125
140
140
160
160
190
190
190
23
32
39
32.5
42.5
46.5
46.5
67.5
23
32
39
30
40
43
43
64
18
24
32.5
26
34
36
30
53
1.5
2
2
2.5
2.5
4
4
4
1.5
1.5
1.5
2
2
3
3
3
97.5
168
215
208
262
335
270
450
168
270
360
267
360
405
320
595
9,950
17,200
21,900
21,200
26,700
34,500
27,600
46,000
17,100
27,600
36,500
27,200
36,500
41,500
33,000
60,500
2,700
2,500
2,500
2,200
2,200
2,000
1,800
2,000
3,600
3,300
3,300
3,000
3,000
2,700
2,400
2,700
32918XU
32018XU
33018U
30218U
32218U
30318U
30318DU
32318U
95
130
145
145
170
170
200
200
200
23
32
39
34.5
45.5
49.5
49.5
49.5
23
32
39
32
43
45
45
45
18
24
32.5
27
37
38
38
32
1.5
2
2
3
3
4
3
4
1.5
1.5
1.5
2.5
2.5
3
3
3
101
171
219
226
299
365
315
296
178
280
375
290
415
445
365
355
10,300
17,500
22,400
23,000
30,500
37,500
32,500
30,000
18,200
28,600
38,000
29,600
42,500
45,500
37,500
36,500
2,500
2,300
2,300
2,100
2,100
1,900
1,900
1,700
32919XU
3,400
32019XU
3,100
3,100
33019U
2,800
30219U
2,800
32219U
2,500 30319U
2
2,500
30319
2,200
30319DU

B-146
Sb
Sa
r 1a
dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X Y X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Dimensions
series to
ISO
Load Constant
center
mm
mm
da
db
min
max
Db
Sa
Sb
ras
r1as
min
min
min
min
max
max
148
133
149
13
2.5
max
Mass
kg
Y2
Yo
39
0.35
1.74
0.96
5.35
(approx.)
2GD
89
2BC
3CC
2CE
3EB
3EC
3EE
2GB
7GB
2GD
85.5
88.5
88.5
92
92
92
94
94
94
85
89
89
91
90
89
102
97
98
104.5
116.5
116.5
130
130
130
158
158
158
99
112
112
124
122
119
148
134
142
106.5
120
119
132
134
135
159
159
159
4
6
6
4
4
7
4
6
4
4
7
6.5
6
7
11
9.5
15.5
13.5
1
1.5
1.5
2
2
2
2.5
2.5
2.5
1
1.5
1.5
2
2
2
2
2
2
20
27
25
27.5
31
35
34
53.5
41.5
0.35
0.42
0.28
0.42
0.42
0.43
0.35
0.83
0.35
1.71
1.42
2.16
1.43
1.43
1.41
1.74
0.73
1.74
0.94
0.78
1.19
0.79
0.79
0.78
0.96
0.40
0.96
0.54
1.28
1.6
1.72
2.18
2.92
4.41
4.11
6.41
2BC
4CC
2CE
3EB
3EC
3EE
2GB
7GB
2GD
93.5
93.5
93.5
97
97
97
103
103
103
92
94
94
97
96
95
107
103
102
111.5
121.5
121.5
140
140
140
166
166
166
111
117
118
132
130
128
156
143
150
115
125
125
141
142
144
167
169
167
4
6
6
5
5
7
5
6
5
5
7
6.5
6.5
8.5
12
10.5
16.5
14.5
1.5
1.5
1.5
2
2
2
3
3
3
1.5
1.5
1.5
2
2
2
2.5
2.5
2.5
21
28.5
26
30
33.5
37.5
35.5
56
43
0.33
0.44
0.29
0.42
0.42
0.42
0.35
0.83
0.35
1.83
1.36
2.06
1.43
1.43
1.43
1.74
0.73
1.74
1.01
0.75
1.13
0.79
0.79
0.79
0.96
0.40
0.96
0.773
1.35
1.7
2.14
2.75
3.58
5.2
4.85
7.15
2BC
3CC
2CE
3FB
3FC
2GB
7GB
2GD
98.5
100
100
102
102
108
108
108
96
100
100
103
102
113
109
108
116.5
131.5
131.5
150
150
176
176
176
112.5
125
127
140
138
165
151
157
120.5
134
135
150
152
177
179
177
4
6
7
5
5
5
6
5
5
8
6.5
6.5
8.5
10.5
16.5
14.5
1.5
2
2
2
2
3
3
3
1.5
1.5
1.5
2
2
2.5
2.5
2.5
22
30
28
32
36
37.5
59
45.5
0.34
0.42
0.27
0.42
0.42
0.35
0.83
0.35
1.75
1.42
2.23
1.43
1.43
1.74
0.73
1.74
0.96
0.78
1.23
0.79
0.79
0.96
0.40
0.96
0.817
1.79
2.18
2.66
3.49
6.03
5.66
8.57
2BC
4CC
2CE
3FB
3FC
2GB
103.5
105
105
109
109
113
113
113
101
105
104
110
108
118
118
114
121.5
136.5
136.5
158
158
186
186
186
117
130
131
149
145
172
172
154
125.5
140
139
159
161
186
186
187
4
6
7
5
5
5
5
6
5
8
6.5
7.5
8.5
11.5
11.5
17.5
1.5
2
2
2.5
2.5
3
3
3
1.5
1.5
1.5
2
2
2.5
2.5
2.5
23.5
31.5
28.5
34
39
40
40
62.5
0.36
0.44
0.28
0.42
0.42
0.35
0.35
0.83
1.68
1.36
2.16
1.43
1.43
1.74
1.73
0.73
0.92
0.75
1.19
0.79
0.79
0.96
0.95
0.40
0.851
1.83
2.27
3.07
4.3
6.98
6.58
6.47
7GB
91
Da
Axial
load factors
B-147

Metric system sizes
T
r1
B
D
d 95120mm
Boundary dimensions
dynamic
mm
d
Basic load ratings

static
dynamic
kN
rs min
r ls min

2 ThIS bearing does not incorporate the subunit dimensions.
Cr
Limiting speeds
static
kgf
Cor
B-148
Cr
rpm
Cor
grease
oil
Bearing
numbers
Sb
Sa
r 1a
dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X Y X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Dimensions
series to
ISO
Load Constant
center
mm
mm
da
db
min
max
Da
max
Db
Sa
Sb
ras
r1as
min
min
min
min
max
max
Axial
load factors
Mass
kg
Y2
Yo
(approx.)
2GD
113
113
186
166
186
16.5
2.5
49
0.35
1.74
0.96
10.1
2CC
108.5
108.5
114
110
110
114
114
118
118
118
118
107.5
107.5
109
109
108
116
114
127
127
121
121
131.5
131.5
131
141.5
141.5
168
168
201
201
201
201
127.5
127.5
130
134
135
157
154
184
184
168
177
135.5
135.5
140
144
143
168
171
200
200
202
200
4
4
4
6
7
5
5
5
5
7
5
5
5
6.5
8
6.5
8
10
12.5
12.5
21.5
17.5
1.5
1.5
2.5
2
2
2.5
2.5
3
3
3
3
1.5
1.5
2.5
1.5
1.5
2
2
2.5
2.5
2.5
2.5
24.5
25
30
32.5
29.5
36
41.5
41.5
42
69
53
0.33
0.35
0.47
0.46
0.29
0.42
0.42
0.35
0.35
0.83
0.35
1.82
1.73
1.27
1.31
2.09
1.43
1.43
1.74
1.73
0.73
1.74
1.00
0.95
0.70
0.72
1.15
0.79
0.79
0.96
0.95
0.40
0.96
1.14
1.08
1.15
1.91
2.37
3.78
5.12
8.56
7.72
8.67
12.7
113.5
117
117
119
119
123
123
123
123
113.5
116
116
122
119
132
132
126
128
136.5
150
150
178
178
211
211
211
211
131.5
143
145
165
161
193
193
176
185
140.5
154
153
178
180
209
209
211
209
5
6
7
6
6
6
6
7
6
5
9
9
9
10
12.5
12.5
22
18.5
1.5
2
2
2.5
2.5
3
3
3
3
1.5
2
2
2
2
2.5
2.5
2.5
2.5
25
34.5
31
38
44
43.5
43.5
71.5
55
0.34
0.44
0.28
0.42
0.42
0.35
0.35
0.83
0.35
1.76
1.35
2.12
1.43
1.43
1.74
1.73
0.73
1.74
0.97
0.74
1.17
0.79
0.79
0.96
0.95
0.40
0.96
1.20
2.42
3.00
4.39
6.25
9.79
8.93
9.68
14.5
118.5
122
122
124
124
128
128
128
128
128
117.5
122
121
129
126
141
141
135
135
135
141.5
160
160
188
188
226
226
226
226
226
137
152
152
174
170
206
206
188
198
198
145.5
163
161
188
190
222
222
224
222
222
5
7
7
6
6
6
6
7
6
6.5
5
9
10
9
10
12.5
12.5
25
19.5
19.5
1.5
2
2
2.5
2.5
3
3
3
3
3
1.5
2
2
2
2
2.5
2.5
2.5
2.5
2.5
26.5
36.5
33.5
40
47
45.5
44
76
57.5
56
0.36
0.43
0.29
0.42
0.42
0.35
0.35
0.83
0.35
0.35
1.69
1.39
2.09
1.43
1.43
1.74
1.73
0.73
1.74
1.73
0.93
0.77
1.15
0.79
0.79
0.96
0.95
0.40
0.96
0.95
1.23
3.07
3.80
5.18
7.43
11.4
10.5
11.9
18.0
16.9
128.5
128.5
132
134
128.5
130.5
131
140
156.5
156.5
170
203
150
147.5
161
187
160
159.5
173
203
6
6
7
6
6
6
9
9.5
1.5
1.5
2
2.5
1.5
1.5
2
2
29.5
31
39
44
0.35
0.37
0.46
0.44
1.72
1.60
1.31
1.38
0.95
0.88
0.72
0.76
1.77
1.63
3.25
6.23
4CB
4CC
2CE
3FB
3FC
2GB
7GB
2GD
4DC
2DE
3FB
3FC
2GB
7GB
2GD
4DC
2DE
3FB
3FC
2GB
7GB
2GD
2CC
4DC
4FB
B-149

Metric system sizes
T
r1
r
B
d
d 120170mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
1
kgf
47,000 69,500
57,000 71,000
47,500 56,000
52,500 67,000
83,000 116,000
1,700
1,500
1,500
1,500
1,500
2,200
2,000
2,000
2,000
2,000
350
252
545
505
815
830
780
19,800
14,500
32,500
38,000
54,000
66,000
61,500
36,000
25,700
55,500
51,500
83,000
84,500
79,500
1,800
1,800
1,700
1,500
1,500
1,400
1,400
2,400 32926XU
2
2,400
32926
2,200
32026XU
2,000
30226U
2,000
32226U
1,800
30326U
1,800
31326XU
200
330
420
375
610
735
640
685
375
580
570
485
920
950
780
905
20,400
33,500
43,000
38,000
62,500
75,000
65,000
70,000
38,000
59,500
58,500
49,500
94,000
97,000
80,000
92,500
1,700
1,600
1,400
1,400
1,400
1,300
1,300
1,300
2,200
32928XU
2,100
32028XU
1,900 30228U
2
1,900
30228
1,900
32228U
1,700 30328U
2
1,700
30328
1,700
31328XU
2
2.5
3
3
4
4
4
268
370
450
700
825
680
775
490
655
605
1 070
1 070
875
1,030
27,300 50,000
37,500 67,000
46,000 61,500
71,500 109,000
84,000 109,000
69,500 89,000
79,000 105,000
1,600
1,400
1,300
1,300
1,200
1,200
1,200
2,100
32930XU
1,900
32030XU
1,700
30230U
1,700
32230U
1,600 30330U
2
1,600
30330
1,600
31330XU
2.5
3
4
4
5
4
2
2.5
3
3
4
4
276
435
525
890
915
755
520
790
720
1,420
1,200
975
28,200 53,000
44,500 80,500
53,500 73,500
90,500 145,000
93,500 122,000
77,000 99,500
1,500
1,400
1,200
1,200
1,100
1,100
1,900
32932XU
1,800
32032XU
1,600
30232U
1,600
32232U
1,500 30332U
2
1,500
30332
2.5
286
560
29,200
1,400
1,800
3
4
3
4
4
2.5
3
3
3
3
460
560
465
515
815
680
695
550
655
1,130
25
26
34
34
54
49
44
2
2
2.5
4
4
5
5
1.5
2
2
3
3
4
4
194
142
320
375
530
650
600
32
45
42
42
68
62
62
70
25
34
36
36
58
53
53
47
2
2.5
4
3
4
5
4
5
1.5
2
3
3
3
4
4
4
38
48
49
77
72
72
82
38
48
45
73
65
65
75
30
36
38
60
55
55
50
2.5
3
4
4
5
4
5
220
240
290
290
340
340
38
51
52
84
75
75
38
51
48
80
68
68
30
38
40
67
58
58
230
38
38
30
120
215
260
260
260
260
61.5
59.5
59.5
68
90.5
58
55
55
62
86
50
46
46
42
69
130
180
180
200
230
230
280
280
32
32
45
43.75
67.75
63.75
72
32
30
45
40
64
58
66
140
190
210
250
250
250
300
300
300
32
45
45.75
45.75
71.75
67.75
67.75
77
150
210
225
270
270
320
320
320
160
rpm
oil
Cr
Bearing
numbers
grease
r ls min
170
Limiting speeds
static
rs min

Cor
B-150
Cr
Cor
57,000
32224U
30324U
2
30324
31324XU
32324U
32934XU
Sb
Sa
r 1a
dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X Y X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Dimensions
series to
ISO
4FD
2GB
Load Constant
center
mm
mm
da
db
min
max
Da
max
Axial
load factors
Mass
kg
Db
Sa
Sb
ras
r1as
min
min
min
min
max
max
Y2
Yo
(approx.)
134
138
138
138
138
136
152
152
145
145
203
246
246
246
246
181
221
221
203
213
204
239
239
244
239
6
6
6
9
6
11.5
13.5
13.5
26
21.5
2.5
3
3
3
3
2
2.5
2.5
2.5
2.5
51.5
49
48.5
82.5
61.5
0.44
0.35
0.35
0.83
0.35
1.38
1.74
1.73
0.73
1.74
0.76
0.96
0.95
0.40
0.96
9.08
14.2
13.2
15.4
22.4
140
140
142
148
148
152
152
139
139
144
152
146
164
152
171.5
170
190
216
216
262
262
163.5
163.5
178
203
193
239
218
174
174
192
218
219
255
261
6
6
8
7
7
8
9
7
6
11
9.5
13.5
14.5
28
2
2
2
3
3
4
4
1.5
2
2
2.5
2.5
3
3
31.5
34
43.5
45.5
57
53.5
87.5
0.34
0.37
0.43
0.44
0.44
0.35
0.83
1.77
1.60
1.38
1.38
1.38
1.74
0.73
0.97
0.88
0.76
0.76
0.76
0.96
0.40
2.36
2.22
4.96
7.25
11.2
17.4
19
150
152
158
158
158
162
162
162
150
153
163
163
158
179
179
165
181.5
200
236
236
236
282
282
282
177
187
219
219
210
251
252
234
184
202
237
237
238
273
273
280
6
8
7
7
9
9
9
9
6
11
9.5
9.5
13.5
14.5
14.5
30
2
2
3
2.5
3
4
4
4
1.5
2
2.5
2.5
2.5
3
3
3
34
46
48.5
47.5
61
56.5
57
94
0.36
0.46
0.44
0.43
0.44
0.35
0.35
0.83
1.67
1.31
1.38
1.39
1.38
1.74
1.73
0.73
0.92
0.72
0.76
0.77
0.76
0.96
0.95
0.40
2.51
5.28
9.26
8.37
14.1
21.2
20.4
23
2DC
4EC
4GB
4GD
2GB
162
164
168
168
172
172
172
162
164
175
170
193
193
176
200
213
256
256
302
302
302
192
200
234
226
269
269
250
202
216
255
254
292
292
302
7
8
7
8
8
8
9
8
12
11
17
17
17
32
2
2.5
3
3
4
4
4
2
2
2.5
2.5
3
3
3
36.5
49.5
51.5
64.5
61
62.5
100.5
0.33
0.46
0.44
0.44
0.35
0.37
0.83
1.83
1.31
1.38
1.38
1.74
1.60
0.73
1.01
0.72
0.76
0.76
0.96
0.88
0.40
3.92
6.37
11.2
18.2
25.5
24.7
27.7
2DC
4EC
4GB
4GD
2GB
172
174
178
178
182
182
170.5
175
189
182
205
205
210
228
276
276
322
322
199
213
252
242
286
286
213.5
231
272
275
310
311
7
8
8
10
10
10
8
13
12
17
17
17
2
2.5
3
3
4
4
2
2
2.5
2.5
3
3
38.5
52.5
55.5
70
64
65.5
0.35
0.46
0.44
0.44
0.35
0.37
1.73
1.31
1.38
1.38
1.74
1.60
0.95
0.72
0.76
0.76
0.96
0.88
4.15
7.8
12.9
23.5
29.9
29.2
3DC
182
183
220
213
222
42.5
0.38
1.57
0.86
4.4
7GB
2GD
2CC
4EC
4FB
4FD
2GB
7GB
2CC
4DC
4FB
4FD
2GB
7GB
B-151

Metric system sizes
T
r1
r
B
d
d 170300mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
rs min
r ls min
Cr
Limiting speeds
static
kgf
Cor
Cr
Bearing
numbers
rpm
Cor
grease
oil
170
260
310
310
360
360
57
57
91
80
80
57
52
86
72
72
43
43
71
62
62
3
5
5
5
4
2.5
4
4
4
4
500
610
1,000
1,010
845
895
845
1,600
1,320
1,100
51,000 91,000
62,000 86,500
102,000 163,000
103,000 135,000
86,000 113,000
1,300
1,100
1,100
1,000
1,000
1,700
32034XU
1,500
30234U
1,500
32234U
1,400 30334U
2
1,400
30334
180
250
280
320
320
45
64
57
91
45
64
52
86
34
48
43
71
2.5
3
5
5
2
2.5
4
4
350
645
630
1,030
700
1,170
890
1,690
36,000 71,500
66,000 119,000
64,000 91,000
105,000 172,000
1,300
1,200
1,100
1,100
1,700
1,600
1,400
1,400
190
260
260
290
340
340
340
45
45
64
60
97
97
45
42
64
55
92
92
34
36
48
46
75
75
2.5
2.5
3
5
5
4
2
2.5
2.5
4
4
4
355
280
655
715
1,150
1,000
710
525
1,210
1,000
1,850
1,670
36,000
28,600
67,000
73,000
117,000
102,000
72,000
53,500
124,000
102,000
189,000
171,000
1,200
1,200
1,100
1,000
1,000
1,000
1,600 32938XU
2
1,600
32938
1,500
32038XUE1
1,300
30238U
1,300 32238U
2
1,300
32238
200
280
310
360
360
360
51
70
64
104
104
51
70
58
98
98
39
53
48
82
82
3
3
5
5
4
2.5
2.5
4
4
4
485
800
785
1,320
1,150
895
1,470
1,110
2,130
1,970
49,000
81,500
80,000
134,000
118,000
91,000
149,000
113,000
217,000
201,000
1,100
1,100
950
950
950
1,500
32940XUE1
1,400
32040XUE1
1,300
30240U
1,300 32240U
2
1,300
32240
220
300
300
340
51
51
76
51
48
76
39
41
57
3
2.5
4
2.5
2.5
3
480
345
920
950
670
1,690
49,000 97,000
35,500 68,500
94,000 173,000
1,000
1,000
960
1,400 32944XUE1
2
1,400
32944E1
1,300
32044XU
240
320
360
51
76
51
76
39
57
3
4
2.5
3
490
930
1,000
1,760
50,000 102,000
95,000 179,000
940
870
1,200
1,200
32948XUE1
32048XU
260
360
400
63.5
87
63.5
87
48
65
3
5
2.5
4
705
1,200
1,430
2,270
72,000 146,000
123,000 231,000
860
800
1,100
1,100
32952XUE1
32052XU
280
380
420
63.5
87
63.5
87
48
65
3
5
2.5
4
725
1,220
1,520
2,350
74,000 155,000
125,000 240,000
790
740
1,100
980
32956XUE1
32056XU
300
420
460
57
74
4
5
3
4
1,010
1,490
2,090
2,830
103,000 213,000
152,000 289,000
720
680
970
910
32960XUE1
32060XU
76
100
76
100

B-152
32936XU
32036XUE1
30236U
32236U
Sb
Sa
r 1a
dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X Y X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Dimensions
series to
ISO
Load Constant
center
mm
mm
da
db
min
max
Da
max
Db
Sa
Sb
ras
r1as
min
min
min
min
max
max
Axial
load factors
Mass
kg
Y2
Yo
(approx.)
4EC
4GB
4GD
2GB
184
192
192
192
192
187
203
201
221
215.5
248
292
292
342
342
230
266
258
303
297
249
288
293
329
327
10
8
10
10
10
14
14
20
18
18
2.5
4
4
4
4
2
3
3
3
3
56
60.5
75
68
69.5
0.44
0.44
0.44
0.35
0.37
1.35
1.38
1.38
1.74
1.60
0.74
0.76
0.76
0.96
0.88
10.5
17
28.7
35.3
34.8
4DC
3FD
4GB
4GD
192
194
202
202
193
197.5
211
204
240
268
302
302
225
243
274
267
241
269
297
305
8
10
9
10
11
16
14
20
2
2.5
4
4
2
2
3
3
54
59.5
63
77.5
0.48
0.42
0.45
0.45
1.25
1.42
1.33
1.33
0.69
0.78
0.73
0.73
6.54
14.5
17.7
30.7
4DC
202
202
204
212
212
212
204
204
209
228
216
216
250
248
278
322
322
322
235
235
257
295
282
286
251
251
279
316
323
323
8
8
10
9
11
11
11
9
16
14
22
22
2
2
2.5
4
4
4
2
2
2
3
3
3
55
48.5
62.5
64
82
87.5
0.48
0.37
0.44
0.44
0.44
0.49
1.26
1.60
1.36
1.38
1.38
1.23
0.69
0.88
0.75
0.76
0.76
0.68
6.77
6.43
15.1
20.8
36.1
33.3
3EC
4FD
4GB
3GD
214
214
222
222
222
214
221
242
230
230
268
298
342
342
342
254
273
311
298
302
271
297
336
340
344
9
11
10
11
11
12
17
16
22
22
2.5
2.5
4
4
4
2
2
3
3
3
53.5
66.5
70
85
91.5
0.39
0.43
0.44
0.41
0.49
1.52
1.39
1.38
1.48
1.23
0.84
0.77
0.76
0.81
0.68
8.88
19.3
25.4
43.6
43.6
3EC
4FD
234
234
238
234
235
243
288
288
326
271
274
300
290
290
326
10
10
12
12
10
19
2.5
2.5
3
2
2
2.5
59.5
57
72.5
0.43
0.39
0.43
1.41
1.55
1.39
0.78
0.85
0.77
10.2
9.63
25
4EC
4FD
254
258
254
261
308
346
290
318
311
346
10
12
12
19
2.5
3
2
2.5
65.5
78
0.46
0.46
1.31
1.31
0.72
0.72
10.9
26.8
3EC
4FC
274
282
279
287
348
382
325
352
347
383
11
14
15
22
2.5
4
2
3
69.5
85.5
0.41
0.43
1.48
1.38
0.81
0.76
18.8
39.4
4EC
4FC
294
302
298
305
368
402
344
370
368
402
11
14
15
22
2.5
4
2
3
75
90.5
0.43
0.46
1.39
1.31
0.76
0.72
20
41.8
3FD
4GD
318
322
324
329
406
442
379
404
405
439
13
15
19
26
3
4
2.5
3
80
98
0.39
0.43
1.52
1.38
0.84
0.76
31.4
59.6
4FD
4GB
4GD
B-153

Metric system sizes
T
r1
B
D
d 320360mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
C
rs min
r ls min

Cr
Limiting speeds
static
kgf
Cor
B-154
Cr
rpm
Cor
grease
oil
Bearing
numbers
Sb
Sa
r 1a
dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X Y X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Dimensions
series to
ISO
3FD
Load Constant
center
mm
mm
da
db
min
max
Da
max
min
Db
Sa
Sb
ras
r1as
min
min
min
max
max
85
85
104
Axial
load factors
Mass
kg
Y2
Yo
0.42
0.39
0.46
1.44
1.55
1.31
0.79
0.85
0.72
33.1
31.7
60.2
(approx.)
338
338
342
344
344
344.5
426
426
462
398
398
418.5
426
425
463
13
13
15
19
13
26
3
3
4
2.5
2.5
3
4FD
358
358
362
362
446
446
417
414
446
445.5
13
13
19
13
3
3
2.5
2.5
90.5
87
0.44
0.39
1.37
1.55
0.75
0.85
34.9
36.0
4FD
378
381
466
436
466
13
19
2.5
96.5
0.46
1.31
0.72
36.6
4GD
B-155

Inch system sizes
T
r1
r
B
d
d 12.70022.225mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
B
Limiting speeds
static
kgf
rpm
Cr
Cor
Cr
Cor
grease
oil
12.700
34.988
10.998
10.988
8.730
12.3
11.6
1,260
1,180
12,000
16,000
14.989
34.988
10.998
10.988
8.730
12.3
11.6
1,260
1,180
12,000
16,000
15.875
41.275
42.862
42.862
47.000
49.225
14.288
14.288
16.670
14.381
19.845
14.681
14.288
16.670
14.381
21.539
11.112
9.525
13.495
11.112
14.288
20.3
17.6
26.7
24.0
38.5
18.7
17.5
26.0
24.2
39.0
2,070
1,800
2,720
2,440
3,900
1,910
1,790
2,650
2,460
3,950
10,000
8,700
9,800
8,600
8,500
13,000
12,000
13,000
11,000
11,000
16.993
47.000
14.381
14.381
11.112
24.0
24.2
2,440
2,460
8,600
11,000
17.462
39.878
13.843
14.605
10.668
23.8
24.2
2,420
2,470
10,000
13,000
19.050
39.992
45.237
47.000
49.225
49.225
49.225
53.975
56.896
12.014
15.494
14.381
18.034
19.845
21.209
22.225
19.368
11.153
16.637
14.381
19.050
21.539
19.050
21.839
19.837
9.525
12.065
11.112
14.288
14.288
17.462
15.875
15.875
12.8
28.3
24.0
38.5
38.5
38.5
40.0
42.5
12.8
28.6
24.2
39.0
39.0
39.0
39.0
46.5
1,310
2,880
2,440
3,900
3,900
3,900
4,100
4,350
1,300
2,920
2,460
3,950
3,950
3,950
3,950
4,750
10,000
8,900
8,600
8,500
8,500
8,500
8,000
7,200
13,000
12,000
11,000
11,000
11,000
11,000
11,000
9,600
19.987
47.000
14.381
14.381
11.112
24.0
24.2
2,440
2,460
8,600
11,000
20.000
50.005
13.495
14.260
9.525
26.0
27.9
2,650
2,850
7,500
10,000
20.625
49.225
19.845
21.539
14.288
38.5
39.0
3,900
3,950
8,500
11,000
20.638
49.225
19.845
19.845
15.875
37.5
39.0
3,800
3,950
8,200
11,000
21.430
50.005
17.526
18.288
13.970
38.0
39.0
3,850
3,950
8,000
11,000
21.986
45.974
15.494
16.637
12.065
29.6
34.0
3,000
3,450
8,400
11,000
22.225
50.005
50.005
52.388
53.975
13.495
17.526
19.368
19.368
14.260
18.288
20.168
20.168
9.525
13.970
14.288
14.288
26.0
38.0
40.5
40.5
27.9
39.0
43.0
43.0
2,650
3,850
4,150
4,150
2,850
3,950
4,350
4,350
7,500
8,000
7,600
7,600
10,000
11,000
10,000
10,000
Note: 1. With regard to the chamfer dimensions on the back face of the inner and outer rings, installation dimensions ras and r1as are larger than the maximum value.
2. For the inner bore diameter of bearings with bearing numbers marked "" (inner ring) or "" (outer ring), this value applies only to high precision class types, Class 4
and 2.
B-156
r1a

dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Bearing numbers
Load Constant
Axial
center
load factors
mm
mm
ras
r1as
da
db
Da
Db
max
max
4T-A4050/A4138
18.5
17
29
32
1.3
1.3
4T-A4059/A4138
19.5
19
29
32
0.8
4T-03062/03162
4T-11590/11520
4T-17580/17520
4T-05062/05185
4T-09062/09195
21.5
24.5
23
23.5
22
20
22.5
21
21
21.5
34
34.5
36.5
40.5
42
37.5
39.5
39
42.5
44.5
4T-05066/05185
24.5
22
40.5
4T-LM11749/LM11710
23
21.5
4T-A6075/A6157
4T-LM11949/LM11910
4T-05075/05185
4T-09067/09195
4T-09078/09195
4T-09067/09196
4T-21075/21212
4T-1775/1729
24
28
25
25.5
25.5
25.5
31.5
27
4T-05079/05185
Mass
kg
Y2
Yo
(approx.)
2.5
0.45
1.32
0.73
0.053
1.3
2.5
0.45
1.32
0.73
0.049
1.3
1.5
1.5
1.5
0.8
2
1.5
1.5
1.3
1.3
5.4
1.2
5.8
4.2
9.4
0.31
0.70
0.33
0.36
0.27
1.93
0.85
1.81
1.68
2.26
1.06
0.47
1.00
0.92
1.24
0.092
0.103
0.122
0.131
0.203
42.5
1.5
1.3
4.2
0.36
1.68
0.92
0.127
34
37
1.3
1.3
5.3
0.29
2.10
1.15
0.084
23
23.5
23.5
24
24
24
26
25
34
39.5
40.5
42
42
41.5
43
49
37
41.5
42.5
44.5
44.5
44.5
50
51
1
1.3
1.3
1.3
1.3
1.3
1.5
1.5
1.3
1.3
1.3
1.3
1.3
1.5
2.3
1.3
1.5
5.6
4.2
7.6
9.4
7.6
5.6
6.5
0.53
0.30
0.36
0.27
0.27
0.27
0.59
0.31
1.14
2.00
1.68
2.26
2.26
2.26
1.02
1.95
0.63
1.10
0.92
1.24
1.24
1.24
0.56
1.07
0.065
0.122
0.121
0.179
0.188
0.198
0.248
0.272
26.5
24
40.5
42.5
1.5
1.3
4.2
0.36
1.68
0.92
0.117
4T-07079/07196
27.5
26
44.5
47
1.5
3.0
0.40
1.49
0.82
0.138
4T-09081/09195
27.5
25.5
42
44.5
1.5
1.3
9.4
0.27
2.26
1.24
0.179
4T-12580/12520
28.5
26
42.5
45.5
1.5
1.5
7.1
0.32
1.86
1.02
0.182
4T-M12649/M12610
29
25.5
44
46
1.3
1.3
6.4
0.28
2.16
1.19
0.169
4T-LM12749/LM12711
27.5
26
40
42.5
1.3
1.3
5.4
0.31
1.96
1.08
0.123
4T-07087/07196
4T-M12648/M12610
4T-1380/1328
4T-1380/1329
28.5
28.5
29.5
29.5
27
26.5
27
27
44.5
44
45
46
47
46
48.5
49
1.3
1.3
1.5
1.5
1
1.3
1.5
1.5
3.0
6.4
7.4
7.4
0.40
0.28
0.29
0.29
1.49
2.16
2.05
2.05
0.82
1.19
1.13
1.13
0.13
0.165
0.2
0.215
3ETNTN
B-157

Inch system sizes
T
r1
r
B
d
d 22.22528.575mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
Limiting speeds
static
kgf
rpm
Cr
Cor
Cr
Cor
grease
oil
22.225
56.896
57.150
19.368
22.225
19.837
22.225
15.875
17.462
42.5
47.0
46.5
49.5
4,350
4,800
4,750
5,050
7,200
7,100
9,600
9,500
22.606
47.000
15.500
15.500
12.000
27.5
32.5
2,800
3,300
8,200
11,000
23.812
50.005
50.292
56.896
13.495
14.224
19.368
14.260
14.732
19.837
9.525
10.668
15.875
26.0
28.8
42.5
27.9
34.0
46.5
2,650
2,940
4,350
2,850
3,450
4,750
7,500
7,400
7,200
10,000
9,900
9,600
24.981
50.005
13.495
14.260
9.525
26.0
27.9
2,650
2,850
7,500
10,000
25.000
50.005
13.495
14.260
9.525
26.0
27.9
2,650
2,850
7,500
10,000
25.159
50.005
13.495
14.260
9.525
26.0
27.9
2,650
2,850
7,500
10,000
25.400
50.005
50.005
50.292
51.994
56.896
57.150
61.912
62.000
62.000
64.292
65.088
66.421
13.495
13.495
14.224
15.011
19.368
19.431
19.050
19.050
19.050
21.433
22.225
23.812
14.260
14.260
14.732
14.260
19.837
19.431
20.638
20.638
20.638
21.433
21.463
25.433
9.525
9.525
10.668
12.700
15.875
14.732
14.288
14.288
14.288
16.670
15.875
19.050
26.0
26.0
28.8
26.0
42.5
42.0
46.5
46.5
46.5
51.5
47.0
64.5
27.9
27.9
34.0
27.9
46.5
48.5
54.0
54.0
54.0
64.5
50.5
72.5
2,650
2,650
2,940
2,650
4,350
4,300
4,750
4,750
4,750
5,250
4,800
6,550
2,850
2,850
3,450
2,850
4,750
4,950
5,500
5,500
5,500
6,600
5,150
7,400
7,500
7,500
7,400
7,500
7,200
6,900
6,100
6,100
6,100
6,100
5,700
6,200
10,000
10,000
9,900
10,000
9,600
9,200
8,200
8,200
8,200
8,100
7,600
8,200
26.157
62.000
19.050
20.638
14.288
46.5
54.0
4,750
5,500
6,100
8,200
26.162
66.421
23.812
25.433
19.050
64.5
72.5
6,550
7,400
6,200
8,200
26.988
50.292
60.325
62.000
66.421
14.224
19.842
19.050
23.812
14.732
17.462
20.638
25.433
10.668
15.875
14.288
19.050
28.8
39.5
46.5
64.5
34.0
45.5
54.0
72.5
2,940
4,050
4,750
6,550
3,450
4,650
5,500
7,400
7,400
6,700
6,100
6,200
9,900
8,900
8,200
8,200
28.575
56.896
57.150
19.845
17.462
19.355
17.462
15.875
13.495
40.5
39.5
44.5
45.5
4,150
4,050
4,550
4,650
6,700
6,700
8,900
8,900
2. For the inner bore diameter of bearings with bearing numbers marked "" (inner ring), this value applies only to high precision class types, Class 4 and 2.
B-158

dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa

Bearing numbers
Load Constant
Axial
center
load factors
mm
mm
ras
r1as
da
db
Da
Db
max
max
4T-1755/1729
4T-1280/1220
29
29.5
27.5
29
49
49
51
52
1.3
0.8
1.3
1.5
4T-LM72849/LM72810
30
28
40.5
44
1.5
4T-07093/07196
4T-L44640/L44610
4T-1779/1729
30.5
30.5
29.5
28.5
28.5
28.5
44.5
44.5
49
47
47
51
4T-07098/07196
31
29
44.5
4T-07097/07196
31
29
4T-07096/07196
31.5
4T-07100/07196
4T-07100S/07196
4T-L44643/L44610
4T-07100/07204
4T-1780/1729
4T-M84548/M84510
4T-15101/15243
4T-15100/15245
4T-15102/15245
4T-M86643/M86610
4T-23100/23256
4T-2687/2631
Mass
kg
Y2
Yo
(approx.)
6.5
7.1
0.31
0.35
1.95
1.73
1.07
0.95
0.256
0.286
3.0
0.47
1.27
0.70
0.125
1.5
1.5
0.8
1
1.3
1.3
3.0
3.4
6.5
0.40
0.37
0.31
1.49
1.60
1.95
0.82
0.88
1.07
0.123
0.137
0.247
47
1.5
3.0
0.40
1.49
0.82
0.118
44.5
47
1.5
3.0
0.40
1.49
0.82
0.118
29.5
44.5
47
1.5
3.0
0.40
1.49
0.82
0.117
30.5
31.5
31.5
30.5
30.5
36
32.5
38
34
38
39
33.5
29.5
29.5
29.5
29.5
30
33
31.5
31.5
31.5
36.5
34.5
31.5
44.5
44.5
44.5
45
49
48.5
54
55
55
54
53
58
47
47
47
48
51
54
58
58
58
61
63
60
1
1.5
1.3
1
0.8
1.5
0.8
3.5
1.5
1.5
1.5
1.3
1
1
1.3
1.3
1.3
1.5
2
1.3
1.3
1.5
1.5
1.3
3.0
3.0
3.4
3.0
6.5
3.4
6.0
6.0
6.0
3.3
2.0
9.3
0.40
0.40
0.37
0.40
0.31
0.55
0.35
0.35
0.35
0.55
0.73
0.25
1.49
1.49
1.60
1.49
1.95
1.10
1.71
1.71
1.71
1.10
0.82
2.36
0.82
0.82
0.88
0.82
1.07
0.60
0.94
0.94
0.94
0.60
0.45
1.30
0.117
0.116
0.13
0.144
0.238
0.241
0.3
0.299
0.301
0.371
0.36
0.442
4T-15103/15245
33
32.5
55
58
0.8
1.3
6.0
0.35
1.71
0.94
0.296
4T-2682/2631
34.5
32
58
60
1.5
1.3
9.3
0.25
2.36
1.30
0.436
4T-L44649/L44610
4T-15580/15523
4T-15106/15245
4T-2688/2631
37.5
38.5
33.5
35
31
32
33
33
44.5
51
55
58
47
54
58
60
3.5
3.5
0.8
1.5
1.3
1.5
1.3
1.3
3.4
5.0
6.0
9.3
0.37
0.35
0.35
0.25
1.60
1.73
1.71
2.36
0.88
0.95
0.94
1.30
0.12
0.26
0.291
0.429
4T-1985/1930
4T-15590/15520
34
39.5
33.5
33.5
51
51
54
53
0.8
3.5
0.8
1.5
6.7
5.0
0.33
0.35
1.82
1.73
1.00
0.95
0.217
0.196
3ETNTN
B-159

Inch system sizes
J system series
T
r1
r
B
d
d 28.57531.750mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
Limiting speeds
static
kgf
rpm
Cr
Cor
Cr
Cor
grease
oil
28.575
58.738
60.325
60.325
62.000
64.292
66.421
68.262
68.262
69.850
72.626
73.025
19.050
19.842
19.845
19.050
21.433
23.812
22.225
22.225
23.812
24.608
22.225
19.355
17.462
19.355
20.638
21.433
25.433
22.225
23.812
25.357
24.257
22.225
15.080
15.875
15.875
14.288
16.670
19.050
17.462
17.462
19.050
17.462
17.462
40.5
39.5
40.5
46.5
51.5
64.5
57.0
57.5
69.0
58.0
56.5
44.5
45.5
44.5
54.0
64.5
72.5
67.0
65.5
81.5
55.5
68.0
4,150
4,050
4,150
4,750
5,250
6,550
5,800
5,850
7,050
5,900
5,750
4,550
4,650
4,550
5,500
6,600
7,400
6,850
6,700
8,300
5,700
6,900
6,700
6,700
6,700
6,100
6,100
6,200
5,800
5,700
5,700
5,800
5,300
8,900
8,900
8,900
8,200
8,100
8,200
7,700
7,700
7,600
7,700
7,000
29.000
50.292
14.224
14.732
10.668
28.0
35.5
2,860
3,600
7,200
9,600
29.367
66.421
23.812
25.433
19.050
64.5
72.5
6,550
7,400
6,200
8,200
29.987
62.000
62.000
16.002
19.050
16.566
20.638
14.288
14.288
39.0
46.5
42.0
54.0
3,950
4,750
4,300
5,500
6,300
6,100
8,400
8,200
30.000
69.012
72.000
19.845
29.370
19.583
27.783
15.875
23.020
48.5
72.0
58.0
97.0
4,900
7,350
5,900
9,850
5,600
5,400
7,400
7,100
30.112
62.000
19.050
20.638
14.288
46.5
54.0
4,750
5,500
6,100
8,200
30.162
62.000
64.292
69.850
72.626
16.002
21.433
23.812
30.162
16.566
21.433
25.357
29.997
14.288
16.670
19.050
23.812
39.0
51.5
69.0
84.5
42.0
64.5
81.5
98.0
3,950
5,250
7,050
8,600
4,300
6,600
8,300
9,950
6,300
6,100
5,700
5,500
8,400
8,100
7,600
7,300
30.213
62.000
62.000
62.000
19.050
19.050
19.050
20.638
20.638
20.638
14.288
14.288
14.288
46.5
46.5
46.5
54.0
54.0
54.0
4,750
4,750
4,750
5,500
5,500
5,500
6,100
6,100
6,100
8,200
8,200
8,200
30.226
69.012
69.012
19.845
19.845
19.583
19.583
15.875
15.875
48.5
48.5
58.0
58.0
4,900
4,900
5,900
5,900
5,600
5,600
7,400
7,400
31.750
59.131
62.000
62.000
15.875
18.161
19.050
16.764
19.050
20.638
11.811
14.288
14.288
34.5
46.5
46.5
41.0
54.0
54.0
3,500
4,750
4,750
4,150
5,500
5,500
6,300
6,100
6,100
8,400
8,200
8,200
B-160
r1a
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db
ras 2.3
ras 5.6
min 3.56
15
min
4.75
Bearing numbers

Load Constant
Axial
center
load factors
mm
mm
ras
r1as
da
db
Da
Db
max
max
4T-1985/1932
4T-15590/15523
4T-1985/1931
4T-15112/15245
4T-M86647/M86610
4T-2689/2631
4T-02474/02420
4T-2474/2420
4T-2578/2523
4T-41125/41286
4T-02872/02820
34
39.5
34
40
40
36
36.5
36
39
48
37.5
33.5
33.5
33.5
34
38
34
36
35
35
36.5
37
52
51
52
55
54
58
59
60
61
61
62
54
54
55
58
61
60
63
63
64
68
68
0.8
3.5
0.8
3.5
1.5
1.3
0.8
0.8
2.3
4.8
0.8
1.3
1.5
1.3
1.3
1.5
1.3
1.5
1.5
1.3
1.5
3.3
4T-L45449/L45410
39.5
33
44.5
48
3.5
4T-2690/2631
41
35
58
60
4T-17118/17244
4T-15117/15245
37
36.5
34.5
35
54
55
42.5
44.5
39.5
42.5
4T-15116/15245
36
4T-17119/17244
4T-M86649/M86610
4T-2558/2523
4T-3187/3120
Mass
kg
Y2
Yo
(approx.)
5.9
5.0
5.9
6.0
3.3
9.3
5.2
6.5
9.1
3.7
3.9
0.33
0.35
0.33
0.35
0.55
0.25
0.42
0.34
0.27
0.60
0.45
1.82
1.73
1.82
1.71
1.10
2.36
1.44
1.77
2.19
1.00
1.32
1.00
0.95
1.00
0.94
0.60
1.30
0.79
0.97
1.21
0.55
0.73
0.23
0.25
0.255
0.277
0.348
0.416
0.409
0.41
0.483
0.477
0.48
1.3
3.5
0.37
1.62
0.89
0.113
3.5
1.3
9.3
0.25
2.36
1.30
0.406
57
58
1.5
1.3
1.5
1.3
3.3
6.0
0.38
0.35
1.57
1.71
0.86
0.94
0.228
0.269
60
58
63
69
3.5
1.3
1.3
3.3
4.1
6.0
0.38
0.55
1.57
1.10
0.86
0.60
0.369
0.619
35.5
55
58
0.8
1.3
6.0
0.35
1.71
0.94
0.268
37
41
40
39
34.5
38
36.5
38.5
54
54
61
61
57
61
64
67
1.5
1.5
2.3
0.8
1.5
1.5
1.3
3.3
3.3
3.3
9.1
9.9
0.38
0.55
0.27
0.33
1.57
1.10
2.19
1.80
0.86
0.60
1.21
0.99
0.226
0.336
0.468
0.621
4T-15118/15245
4T-15119/15245
4T-15120/15245
41.5
37.5
36
35.5
35.5
35.5
55
55
55
58
58
58
3.5
1.5
0.8
1.3
1.3
1.3
6.0
6.0
6.0
0.35
0.35
0.35
1.71
1.71
1.71
0.94
0.94
0.94
0.265
0.267
0.267
4T-14116/14274
4T-14116/14276
37
37
36.5
36.5
59
60
63
63
0.8
0.8
3.3
1.3
4.1
4.1
0.38
0.38
1.57
1.57
0.86
0.86
0.366
0.37
4T-LM67048/LM67010
4T-15123/15245
4T-15125/15245
42.5
42.5
42.5
36
36.5
36.5
52
55
55
56
58
58
3.5
1.3
1.3
1.3
2.8
5.1
6.0
0.41
0.35
0.35
1.46
1.71
1.71
0.80
0.94
0.94
0.182
0.244
0.253
4T-14117A/14276
4T-JHM88540/JHM88513
Note: 3. Bearing numbers marked "" designate J-series bearings. The tolerances of these bearings is listed in Table 6.6 on page A-40.
4. Chamfer dimensions of bearings marked "" are shown in drawings.
B-161

Inch system sizes
J system series
T
r1
r
B
d
d 31.75034.925mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
Limiting speeds
static
kgf
rpm
Cr
Cor
Cr
Cor
grease
oil
31.750
62.000
66.421
68.262
68.262
69.012
69.012
69.850
69.850
72.626
72.626
73.025
73.025
73.025
73.812
76.200
79.375
19.050
25.400
22.225
22.225
19.845
19.845
23.812
23.812
30.162
30.162
22.225
22.225
29.370
29.370
29.370
29.370
20.638
25.357
22.225
22.225
19.583
19.583
25.357
25.357
29.997
29.997
22.225
23.812
27.783
27.783
28.575
29.771
14.288
20.638
17.462
17.462
15.875
15.875
19.050
19.050
23.812
23.812
17.462
17.462
23.020
23.020
23.020
23.812
46.5
69.0
57.0
57.0
48.5
48.5
69.0
69.0
84.5
84.5
56.5
62.5
72.0
72.0
78.0
93.0
54.0
81.5
67.0
67.0
58.0
58.0
81.5
81.5
98.0
98.0
68.0
75.5
97.0
97.0
105
114
4,750
7,050
5,800
5,800
4,900
4,900
7,050
7,050
8,600
8,600
5,750
6,400
7,350
7,350
7,950
9,450
5,500
8,300
6,850
6,850
5,900
5,900
8,300
8,300
9,950
9,950
6,900
7,700
9,850
9,850
10,700
11,600
6,100
5,700
5,800
5,800
5,600
5,600
5,700
5,700
5,500
5,500
5,300
5,200
5,400
5,400
5,100
4,900
8,200
7,600
7,700
7,700
7,400
7,400
7,600
7,600
7,300
7,300
7,000
7,000
7,100
7,100
6,800
6,600
33.338
68.262
69.012
69.850
72.626
73.025
76.200
76.200
76.200
79.375
22.225
19.845
23.812
30.162
29.370
23.812
29.370
29.370
25.400
22.225
19.583
25.357
29.997
27.783
25.654
28.575
28.575
24.074
17.462
15.875
19.050
23.812
23.020
19.050
23.020
23.020
17.462
56.5
48.5
69.0
84.5
72.0
73.0
78.0
78.0
65.5
71.0
58.0
81.5
98.0
97.0
90.5
105
105
67.0
5,750
4,900
7,050
8,600
7,350
7,450
7,950
7,950
6,650
7,250
5,900
8,300
9,950
9,850
9,200
10,700
10,700
6,800
5,700
5,600
5,700
5,500
5,400
5,100
5,100
5,100
5,200
7,500
7,400
7,600
7,300
7,100
6,800
6,800
6,800
6,900
34.925
65.088
65.088
69.012
72.233
72.238
73.025
73.025
73.025
73.025
73.025
73.025
76.200
18.034
18.034
19.845
25.400
20.638
22.225
22.225
22.225
23.812
23.812
23.812
23.812
18.288
18.288
19.583
25.400
20.638
22.225
22.225
23.812
24.608
24.608
25.654
25.654
13.970
13.970
15.875
19.842
15.875
17.462
17.462
17.462
19.050
19.050
19.050
19.050
46.5
46.5
48.5
65.0
48.0
56.5
56.5
62.5
71.0
71.0
73.0
73.0
56.0
56.0
58.0
84.5
58.5
68.0
68.0
75.5
85.0
85.0
90.5
90.5
4,750
4,750
4,900
6,600
4,900
5,750
5,750
6,400
7,200
7,200
7,450
7,450
5,700
5,700
5,900
8,600
5,950
6,900
6,900
7,700
8,700
8,700
9,200
9,200
5,700
5,700
5,600
5,400
5,300
5,300
5,300
5,200
5,300
5,300
5,100
5,100
7,600
7,600
7,400
7,200
7,000
7,000
7,000
7,000
7,100
7,100
6,800
6,800
B-162
r1a
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db
ras 2.3
ras 5.6
min 3.56
15
min
4.75
Bearing numbers

Load Constant
Axial
center
load factors
mm
mm
ras
r1as
da
db
Da
Db
max
max
4T-15126/15245
4T-2580/2520
4T-02475/02420
4T-02476/02420
4T-14124/14276
4T-14125A/14276
4T-2580/2523
4T-2582/2523
4T-3188/3120
4T-3193/3120
4T-02875/02820
4T-2879/2820
4T-HM88542/HM88510
4T-HM88542/HM88512
4T-HM89440/HM89410
4T-3476/3420
37
38.5
44.5
39
38.5
44
38.5
44
40
45.5
45.5
39.5
45.5
45.5
45.5
43
36.5
37.5
38.5
38.5
37.5
37.5
37.5
37.5
39.5
39.5
39.5
38.5
42.5
42.5
44.5
41
55
57
59
59
60
60
61
61
61
61
62
63
59
60
62
67
58
62
63
63
63
63
64
64
67
67
68
68
70
70
73
74
0.8
0.8
3.5
0.8
0.8
3.5
0.8
3.5
0.8
3.5
3.5
0.8
1.3
1.3
0.8
1.3
1.3
3.3
1.5
1.5
1.3
1.3
1.3
1.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
4T-M88048/M88010
4T-14130/14276
4T-2585/2523
4T-3196/3120
4T-HM88547/HM88510
4T-2785/2720
4T-HM89443/HM89410
4T-HM89444/HM89410
4T-43131/43312
42.5
45
45
47
45.5
46
46.5
53
51
41
38.5
39
40.5
42.5
40
44.5
44.5
42
58
60
61
61
59
66
62
62
67
65
63
64
67
70
70
73
73
74
0.8
3.5
3.5
3.5
0.8
3.5
0.8
3.8
3.5
4T-LM48548/LM48510
4T-LM48548A/LM48510
4T-14137A/14276
4T-HM88649/HM88610
4T-16137/16284
4T-02877/02820
4T-02878/02820
4T-2878/2820
4T-25877/25820
4T-25877/25821
4T-2793/2735X
4T-2793/2720
46
40.5
42
48.5
47
48.5
42.5
42
43
43
42
42
40
42
40
42.5
40.5
42
42
41
40.5
40.5
41
41
58
58
60
60
63
62
62
63
64
65
66
66
61
61
63
69
67
68
68
68
68
68
69
70
0.8
1.5
2.3
3.5
3.5
0.8
0.8
1.5
1.5
0.8
0.8
3ETNTN
B-163
Mass
kg
Y2
Yo
(approx.)
6.0
9.1
5.2
5.2
4.1
4.1
9.1
9.1
9.9
9.9
3.9
5.5
6.0
6.0
5.8
8.7
0.35
0.27
0.42
0.42
0.38
0.38
0.27
0.27
0.33
0.33
0.45
0.37
0.55
0.55
0.55
0.37
1.71
2.19
1.44
1.44
1.57
1.57
2.19
2.19
1.80
1.80
1.32
1.63
1.10
1.10
1.10
1.64
0.94
1.21
0.79
0.79
0.86
0.86
1.21
1.21
0.99
0.99
0.73
0.90
0.60
0.60
0.60
0.90
0.255
0.409
0.38
0.383
0.359
0.356
0.454
0.451
0.603
0.601
0.451
0.465
0.622
0.638
0.686
0.767
1.5
1.3
1.3
3.3
3.3
3.3
3.3
3.3
1.5
2.9
4.1
9.1
9.9
6.0
7.8
5.8
5.8
1.4
0.55
0.38
0.27
0.33
0.55
0.30
0.55
0.55
0.67
1.10
1.57
2.19
1.80
1.10
1.98
1.10
1.10
0.90
0.60
0.86
1.21
0.99
0.60
1.09
0.60
0.60
0.49
0.378
0.344
0.435
0.581
0.604
0.551
0.668
0.665
0.568
1.3
1.3
1.3
2.3
1.3
3.3
3.3
3.3
2.3
0.8
0.8
3.3
3.7
3.7
4.1
4.6
4.2
3.9
3.9
5.5
8.1
8.1
7.8
7.8
0.38
0.38
0.38
0.55
0.40
0.45
0.45
0.37
0.29
0.29
0.30
0.30
1.59
1.59
1.57
1.10
1.49
1.32
1.32
1.63
2.07
2.07
1.98
1.98
0.88
0.88
0.86
0.60
0.82
0.73
0.73
0.90
1.14
1.14
1.09
1.09
0.249
0.252
0.333
0.489
0.385
0.422
0.425
0.434
0.471
0.474
0.485
0.536

Inch system sizes
J system series
T
r1
r
B
d
d 34.92538.100mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
B
Cr
Limiting speeds
static
kgf
rpm
Cor
Cr
Cor
grease
oil
34.925
76.200
76.200
76.200
76.200
79.375
80.167
85.725
23.812
29.370
29.370
29.370
29.370
29.370
30.162
25.654
28.575
28.575
28.575
29.771
30.391
30.162
19.050
23.020
23.812
23.812
23.812
23.812
23.812
73.0
78.0
80.5
80.5
93.0
95.0
105
90.5
105
97.0
97.0
114
112
132
7,450
7,950
8,200
8,200
9,450
9,700
10,700
9,200
10,700
9,900
9,900
11,600
11,400
13,400
5,100
5,100
5,100
5,100
4,900
4,800
4,500
6,800
6,800
6,800
6,800
6,600
6,400
6,000
34.976
69.012
19.845
19.583
15.875
48.5
58.0
4,900
5,900
5,600
7,400
34.988
59.974
61.973
61.973
15.875
16.700
18.000
16.764
17.000
17.000
11.938
13.600
15.000
35.5
37.0
37.0
47.5
48.0
48.0
3,600
3,800
3,800
4,850
4,900
4,900
6,100
5,900
5,900
8,100
7,900
7,900
35.000
70.000
79.375
80.000
24.000
23.812
21.000
23.500
25.400
22.403
19.000
19.050
17.826
62.0
76.5
68.0
78.0
97.5
75.0
6,350
7,800
6,950
7,950
9,950
7,650
5,500
4,800
4,700
7,300
6,400
6,300
35.717
72.233
72.626
25.400
25.400
25.400
25.400
19.842
19.842
65.0
65.0
84.5
84.5
6,600
6,600
8,600
8,600
5,400
5,400
7,200
7,200
36.487
73.025
76.200
23.812
23.812
24.608
25.654
19.050
19.050
71.0
73.0
85.0
90.5
7,200
7,450
8,700
9,200
5,300
5,100
7,100
6,800
36.512
76.200
76.200
76.200
79.375
79.375
88.500
29.370
29.370
29.370
29.370
29.370
25.400
28.575
28.575
28.575
28.829
29.771
23.698
23.020
23.020
23.812
22.664
23.812
17.462
78.0
78.0
80.5
86.5
93.0
70.5
105
105
97.0
104
114
78.0
7,950
7,950
8,200
8,800
9,450
7,200
10,700
10,700
9,900
10,600
11,600
7,950
5,100
5,100
5,100
5,000
4,900
4,000
6,800
6,800
6,800
6,600
6,600
5,300
38.000
63.000
17.000
17.000
13.500
38.5
52.5
3,950
5,350
5,700
7,600
38.100
63.500
65.088
69.012
69.012
71.438
72.000
12.700
18.034
19.050
19.050
15.875
19.000
11.908
18.288
19.050
19.050
16.520
20.638
9.525
13.970
15.083
15.083
11.908
14.237
25.9
43.5
47.5
47.5
43.5
48.0
33.5
57.0
59.5
59.5
51.0
58.5
2,640
4,400
4,850
4,850
4,400
4,900
3,400
5,800
6,050
6,050
5,200
5,950
5,500
5,500
5,300
5,300
5,400
5,300
7,300
7,400
7,100
7,100
7,200
7,000
and 2.
B-164
r1a
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db
ras 2.3
ras 5.6
min 3.56
15
min
4.75
Bearing numbers

Load Constant
Axial
center
load factors
mm
mm
ras
r1as
Mass
kg
da
db
Da
Db
max
max
Y2
Yo
(approx.)
4T-2793/2729
4T-HM89446/HM89410
4T-31593/31520
4T-31594/31520
4T-3478/3420
4T-3379/3320
4T-3872/3820
42
53
50
46
50
48
53
41
44.5
43.5
43.5
43.5
41.5
46
68
62
64
64
67
70
73
70
73
72
72
74
75
81
0.8
3.5
3.5
1.5
3.5
3.5
3.5
0.8
3.3
3.3
3.3
3.3
3.3
3.3
7.8
5.8
7.8
7.8
8.7
11.2
8.1
0.30
0.55
0.40
0.40
0.37
0.27
0.40
1.98
1.10
1.49
1.49
1.64
2.20
1.49
1.09
0.60
0.82
0.82
0.90
1.21
0.82
0.541
0.646
0.625
0.627
0.725
0.732
0.897
4T-14139/14276
41.5
40
60
63
1.3
1.3
4.1
0.38
1.57
0.86
0.333
4T-L68149/L68111
4T-LM78349A/LM78310A
4T-LM78349/LM78310C
45.5
42
46
39
39.5
40
53
54
56
56
59
59
1.5
1.3
1.5
1.5
2.5
2.4
2.4
0.42
0.44
0.44
1.44
1.35
1.35
0.79
0.74
0.74
0.179
0.209
0.218
47
42.5
42.5
42
42
41.5
60
71
73
67
74
75
2
0.8
0.8
1.5
0.8
1.3
3.6
7.4
6.6
0.55
0.32
0.27
1.10
1.88
2.20
0.60
1.04
1.21
0.42
0.61
0.534
4T-HM88648/HM88610
4T-HM88648/HM88611AS
52
52
43
43
60
59
69
69
3.5
3.5
2.3
3.3
4.6
3.0
0.55
0.55
1.10
1.10
0.60
0.60
0.478
0.482
4T-25880/25821
4T-2780/2720
44
44.5
42
42.5
65
66
68
70
1.5
1.5
0.8
3.3
8.1
7.8
0.29
0.30
2.07
1.98
1.14
1.09
0.457
0.518
4T-HM89448/HM89410
4T-HM89449/HM89411
4T-31597/31520
4T-HM89249/HM89210
4T-3479/3420
4T-44143/44348
48.5
54
51
55
45.5
54
44.5
44.5
44.5
44
44.5
50
62
65
64
66
67
75
73
73
72
75
74
84
0.8
3.5
3.5
3.5
0.8
2.3
3.3
0.8
3.3
3.3
3.3
1.5
5.8
5.8
7.8
5.8
8.7
2.9
0.55
0.55
0.40
0.55
0.37
0.78
1.10
1.10
1.49
1.10
1.64
0.77
0.60
0.60
0.82
0.60
0.90
0.42
0.629
0.631
0.605
0.686
0.707
0.729
49
42.5
56
60
1.3
2.3
0.42
1.44
0.79
0.198
45
49
49.5
46.5
45
49.5
42.5
42.5
43
43
43
43
59
59
61
61
63
63
60
62
65
65
66
67
1.5
3.5
2
1.5
3.5
0.8
1.3
2.3
2.3
1
1.5
0.8
4.3
3.0
3.0
1.4
4.2
0.35
0.33
0.40
0.40
0.44
0.40
1.73
1.80
1.49
1.49
1.35
1.49
0.95
0.99
0.82
0.82
0.74
0.82
0.147
0.233
0.293
0.296
0.273
0.331
4T-JS3549A/JS3510
4T-26883/26822
4T-339/332
4T-JL69349/JL69310
4T-13889/13830
4T-LM29748/LM29710
4T-13685/13621
4T-13687/13621
4T-19150/19281
4T-16150/16282
B-165

Inch system sizes
T
r1
r
B
d
d 38.10041.275mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
B
Cr
Limiting speeds
static
kgf
rpm
Cor
Cr
Cor
grease
oil
38.100
76.200
76.200
76.200
79.375
79.375
80.000
80.035
82.550
82.931
85.725
87.312
88.500
88.500
20.638
23.812
23.812
23.812
29.370
21.006
24.608
29.370
23.812
30.162
30.162
25.400
26.988
20.940
25.654
25.654
25.400
29.771
20.940
23.698
28.575
25.400
30.162
30.886
23.698
29.083
15.507
19.050
19.050
19.050
23.812
15.875
18.512
23.020
19.050
23.812
23.812
17.462
22.225
55.5
73.0
73.0
76.5
93.0
55.5
67.0
87.0
76.0
105
94.0
70.5
95.5
63.0
90.5
90.5
97.5
114
63.0
82.5
117
98.0
132
117
78.0
107
5,650
7,450
7,450
7,800
9,450
5,650
6,850
8,850
7,750
10,700
9,600
7,200
9,750
6,450
9,200
9,200
9,950
11,600
6,450
8,400
11,900
10,000
13,400
12,000
7,950
10,900
5,000
5,100
5,100
4,800
4,900
5,000
4,800
4,700
4,500
4,500
4,400
4,000
4,600
6,700
6,800
6,800
6,400
6,600
6,700
6,400
6,200
6,000
6,000
5,900
5,300
6,100
39.688
76.200
77.534
79.375
80.035
80.167
88.500
23.812
29.370
23.812
29.370
29.370
25.400
25.654
30.391
25.400
30.391
30.391
23.698
19.050
23.812
19.050
23.812
23.812
17.462
73.0
95.0
76.5
95.0
95.0
70.5
90.5
112
97.5
112
112
78.0
7,450
9,700
7,800
9,700
9,700
7,200
9,200
11,400
9,950
11,400
11,400
7,950
5,100
4,800
4,800
4,800
4,800
4,000
6,800
6,400
6,400
6,400
6,400
5,300
40.000
76.200
80.000
85.000
88.500
107.950
20.638
21.000
20.638
26.988
36.512
20.940
22.403
21.692
29.083
36.957
15.507
17.826
17.462
22.225
28.575
55.5
68.0
69.5
95.5
141
63.0
75.0
79.5
107
177
5,650
6,950
7,100
9,750
14,400
6,450
7,650
8,100
10,900
18,100
5,000
4,700
4,400
4,600
3,600
6,700
6,300
5,800
6,100
4,800
40.483
82.550
29.370
28.575
23.020
87.0
8,850
11,900
4,700
6,200
40.988
67.975
17.500
18.000
13.500
46.0
62.5
4,700
6,400
5,300
7,000
41.275
73.025
73.431
73.431
76.200
76.200
76.200
79.375
80.000
16.667
19.558
21.430
18.009
22.225
25.400
23.812
18.009
17.462
19.812
19.812
17.384
23.020
25.400
25.400
17.384
12.700
14.732
16.604
14.288
17.462
20.638
19.050
14.288
46.0
56.0
56.0
42.5
65.0
76.5
76.5
42.5
55.5
69.5
69.5
51.5
80.5
97.5
97.5
51.5
4,700
5,700
5,700
4,350
6,600
7,800
7,800
4,350
5,700
7,100
7,100
5,250
8,200
9,950
9,950
5,250
5,000
5,000
5,000
4,900
4,900
4,800
4,800
4,900
6,600
6,600
6,600
6,500
6,500
6,400
6,400
6,500
117
and 2.
B-166
r1a
dynamic
PrXFrYFa
Fa
Fa
e
Fr
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db
ras 2.3
ras 5.6
min 3.56
15
min
4.75
Bearing numbers

Load Constant
Axial
center
load factors
mm
mm
ras
r1as
da
db
Da
Db
max
max
4T-28150/28300
4T-2776/2720
4T-2788/2720
4T-26878/26822
4T-3490/3420
4T-28150/28315
4T-27880/27820
4T-HM801346/HM801310
4T-25572/25520
4T-3875/3820
4T-3580/3525
4T-44150/44348
4T-418/414
45.5
52
50
45
52
45.5
48
51
46
49.5
48
55
51
43.5
43.5
43.5
44.5
45.5
43.5
47
49
46
48.5
45.5
51
44.5
68
66
66
71
67
69
68
68
74
73
75
75
77
71
70
70
74
74
73
75
78
77
81
81
84
80
1.5
4.3
3.5
0.8
3.5
1.5
0.8
0.8
0.8
0.8
1.5
2.3
3.5
1.3
3.3
3.3
0.8
3.3
1.5
1.5
3.3
0.8
3.3
3.3
1.5
1.5
4T-2789/2720
4T-3382/3321
4T-26880/26822
4T-3382/3339
4T-3386/3320
4T-44158/44348
52
52
48
52
46.5
58
45
45.5
45.5
45.5
45.5
51
66
68
71
71
70
75
70
75
74
75
75
84
3.5
3.5
1.5
3.5
0.8
3.5
4T-28158/28300
4T-344/332
4T-350A/354A
4T-420/414
4T-543/532X
47.5
52
47.5
52
57
45
45.5
46.5
46
50
68
73
77
77
94
71
75
80
80
100
4T-HM801349/HM801310
58
49
68
4T-LM300849/LM300811
52
45
4T-18590/18520
4T-LM501349/LM501310
4T-LM501349/LM501314
4T-11162/11300
4T-24780/24720
4T-26882/26823
4T-26885/26822
4T-11162/11315
53
53
53
49
54
54
48
49
46
46.5
46.5
46.5
47
47
47
46.5
kg
Y2
Yo
(approx.)
4.8
7.8
7.8
7.4
8.7
4.8
2.5
4.7
6.2
8.1
10.0
2.91
9.1
0.40
0.30
0.30
0.32
0.37
0.40
0.56
0.55
0.33
0.40
0.31
0.78
0.26
1.49
1.98
1.98
1.88
1.64
1.49
1.07
1.10
1.79
1.49
1.96
0.77
2.28
0.82
1.09
1.09
1.04
0.90
0.82
0.59
0.60
0.99
0.82
1.08
0.42
1.25
0.405
0.495
0.497
0.574
0.683
0.467
0.562
0.767
0.645
0.857
0.881
0.711
0.84
3.3
3.3
0.8
1.5
3.3
1.5
7.8
11.2
7.4
11.2
11.2
2.91
0.30
0.27
0.32
0.27
0.27
0.78
1.98
2.20
1.88
2.20
2.20
0.77
1.09
1.21
1.04
1.21
1.21
0.42
0.477
0.669
0.554
0.666
0.668
0.691
1.5
3.5
0.8
3.5
3.5
1.3
1.3
1.3
1.5
3.3
4.8
6.6
5.1
9.1
12.3
0.40
0.27
0.31
0.26
0.30
1.49
2.20
1.96
2.28
2.02
0.82
1.21
1.08
1.25
1.11
0.386
0.479
0.562
0.813
1.77
78
3.5
3.3
4.7
0.55
1.10
0.60
0.731
61
65
1.5
3.6
0.35
1.72
0.95
0.239
66
67
66
67
68
69
71
69
69
70
70
71
72
73
74
73
3.5
3.5
3.5
1.5
3.5
3.5
0.8
1.5
1.5
0.8
0.8
1.5
0.8
1.5
0.8
1.5
2.9
3.3
3.3
0.7
4.5
7.4
7.4
0.7
0.35
0.40
0.40
0.49
0.39
0.32
0.32
0.49
1.71
1.50
1.50
1.23
1.53
1.88
1.88
1.23
0.94
0.83
0.83
0.68
0.84
1.04
1.04
0.68
0.281
0.335
0.355
0.337
0.432
0.488
0.535
0.389
Note: 3. Chamfer dimensions of bearings marked "" are shown in drawings.

1 "" means that load center at outside on end of inner ring.
B-167
Mass

Inch system sizes
T
r1
r
B
d
d 41.27544.450mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
B
Cr
Limiting speeds
static
kgf
rpm
Cor
Cr
Cor
grease
oil
41.275
80.000
80.000
82.550
85.725
87.312
88.900
90.488
92.075
93.662
95.250
95.250
95.250
21.000
23.812
26.543
30.162
30.162
30.162
39.688
26.195
31.750
30.162
30.958
30.958
22.403
25.400
25.654
30.162
30.886
29.370
40.386
23.812
31.750
29.370
28.300
28.575
17.826
19.050
20.193
23.812
23.812
23.020
33.338
16.670
26.195
23.020
20.638
22.225
68.0
76.5
80.5
105
94.0
93.5
136
72.5
104
109
82.5
96.0
75.0
97.5
104
132
117
125
175
81.5
131
147
92.0
116
6,950
7,800
8,200
10,700
9,600
9,550
13,900
7,400
10,600
11,100
8,400
9,800
7,650
9,950
10,600
13,400
12,000
12,700
17,900
8,300
13,400
15,000
9,350
11,800
4,700
4,800
4,600
4,500
4,400
4,300
4,300
3,800
4,100
4,000
3,700
3,700
6,300
6,400
6,100
6,000
5,900
5,800
5,800
5,000
5,500
5,300
5,000
4,900
42.070
90.488
39.688
40.386
33.338
136
175
13,900
17,900
4,300
5,800
42.862
82.550
82.931
87.312
26.195
23.812
30.162
26.988
25.400
30.886
20.638
19.050
23.812
75.5
76.0
94.0
97.0
98.0
117
7,700
7,750
9,600
9,900
10,000
12,000
4,600
4,500
4,400
6,100
6,000
5,900
42.875
79.375
82.931
23.812
23.812
25.400
25.400
19.050
19.050
76.5
76.0
97.5
98.0
7,800
7,750
9,950
10,000
4,800
4,500
6,400
6,000
44.450
76.992
79.375
82.931
82.931
84.138
85.000
87.312
88.900
93.264
93.662
95.250
95.250
95.250
95.250
95.250
101.600
104.775
17.462
17.462
23.812
23.812
30.162
20.638
30.162
30.162
30.162
31.750
27.783
27.783
30.162
30.958
30.958
34.925
30.162
17.145
17.462
25.400
25.400
30.886
21.692
30.886
29.370
30.302
31.750
28.575
29.900
29.370
28.300
28.575
36.068
29.317
11.908
13.495
19.050
19.050
23.812
17.462
23.812
23.020
23.812
26.195
22.225
22.225
23.020
20.638
22.225
26.988
24.605
44.0
45.5
76.0
76.0
94.0
69.5
94.0
93.5
102
103
107
108
109
82.5
96.0
135
115
54.0
56.0
98.0
98.0
117
79.5
117
125
134
131
139
129
147
92.0
116
165
148
4,450
4,600
7,750
7,750
9,600
7,100
9,600
9,550
10,400
10,600
10,900
11,000
11,100
8,400
9,800
13,800
11,700
5,550
5,700
10,000
10,000
12,000
8,100
12,000
12,700
13,700
13,400
14,200
13,200
15,000
9,350
11,800
16,800
15,000
4,700
4,600
4,500
4,500
4,400
4,400
4,400
4,300
4,000
4,100
3,900
4,200
4,000
3,700
3,700
3,800
3,500
6,300
6,200
6,000
6,000
5,900
5,800
5,900
5,800
5,300
5,500
5,200
5,600
5,300
5,000
4,900
5,000
4,700
B-168
r1a
dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db
ras 2.3
ras 5.6
min 3.56
15
min
4.75
Bearing numbers

Load Constant
Axial
center
load factors
mm
mm
ras
r1as
da
db
Da
Db
max
max
4T-336/332
4T-26882/26824
4T-M802048/M802011
4T-3880/3820
4T-3576/3525
4T-HM803145/HM803110
4T-4388/4335
4T-M903345/M903310
4T-46162/46368
4T-HM804840/HM804810
4T-53162/53375
4T-HM903245/HM903210
47
54
57
52
49
54
57
60
52
61
57
63
46
47
51
50
48
53
51
54
51
54
53
54
73
70
70
73
75
74
77
78
79
81
81
81
75
74
79
81
81
85
85
88
87
91
89
91
0.8
3.5
3.5
0.8
0.8
0.8
3.5
3.5
0.8
3.5
1.5
3.5
1.3
1.3
3.3
3.3
3.3
3.3
3.3
1.5
3.3
3.3
0.8
0.8
4T-4395/4335
58
51
77
85
3.5
4T-22780/22720
4T-25578/25520
4T-3579/3525
56
53
56
50
49.5
49.5
71
74
75
77
77
81
4T-26884/26822
4T-25577/25520
55
55
48.5
49
71
74
4T-12175/12303
4T-18685/18620
4T-25580/25520
4T-25582/25520
4T-3578/3520
4T-355/354A
4T-3578/3525
4T-HM803149/HM803110
4T-3782/3720
4T-46175/46368
4T-33885/33821
4T-438/432
4T-HM804842/HM804810
4T-53177/53375
4T-HM903249/HM903210
4T-527/522
4T-460/453X
52
54
57
60
57
54
57
62
58
55
53
57
57
63
65
59
60
49.5
49.5
50
50
51
50
51
53
52
54
53
51
57
53
54
53
54
68
71
74
74
74
77
75
74
82
79
85
83
81
81
81
89
92
kg
Y2
Yo
(approx.)
6.6
7.4
3.2
8.1
10.0
4.6
15.0
3.61
7.1
3.7
0.5
0.41
0.27
0.32
0.55
0.40
0.31
0.55
0.28
0.83
0.40
0.55
0.74
0.74
2.20
1.88
1.10
1.49
1.96
1.10
2.11
0.72
1.49
1.10
0.81
0.81
1.21
1.04
0.60
0.82
1.08
0.60
1.16
0.40
0.82
0.60
0.45
0.45
0.468
0.542
0.642
0.81
0.834
0.901
1.25
0.758
1.09
1.08
0.975
1.05
3.3
15.0
0.28
2.11
1.16
1.24
3.5
2.3
3.5
3.3
0.8
3.3
6.4
6.2
10.0
0.40
0.33
0.31
1.49
1.79
1.96
0.82
0.99
1.08
0.617
0.584
0.805
74
77
3.5
3.5
0.8
0.8
7.4
6.2
0.32
0.33
1.88
1.79
1.04
0.99
0.51
0.581
73
74
77
77
80
80
81
85
88
87
90
87
91
89
91
95
98
1.5
2.8
3.5
5
3.5
2.3
3.5
3.5
3.5
0.8
0.8
3.5
0.8
3.5
3.5
3.5
3.5
1.5
1.5
0.8
0.8
3.3
1.3
3.3
3.3
3.3
3.3
2.3
2.3
3.3
0.8
0.8
3.3
3.3
0.21
2.2
6.2
6.2
10.0
5.1
10.0
4.6
8.3
7.1
8.0
9.2
3.7
0.5
0.41
12.9
7.1
0.51
0.37
0.33
0.33
0.31
0.31
0.31
0.55
0.34
0.40
0.33
0.28
0.55
0.74
0.74
0.29
0.34
1.19
1.60
1.79
1.79
1.96
1.96
1.96
1.10
1.77
1.49
1.82
2.11
1.10
0.81
0.81
2.10
1.79
0.65
0.88
0.99
0.99
1.08
1.08
1.08
0.60
0.97
0.82
1.00
1.16
0.60
0.45
0.45
1.16
0.98
0.308
0.345
0.56
0.556
0.699
0.511
0.779
0.849
0.961
1.04
0.987
0.953
1.04
0.925
1
1.37
1.29
B-169
Mass

Inch system sizes
T
r1
r
B
d
d 44.45047.625mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
B
Cr
Limiting speeds
static
kgf
Cor
rpm
Cr
Cor
grease
oil
44.450
104.775
104.775
111.125
111.125
127.000
30.162
36.512
30.162
30.162
50.800
30.958
36.512
26.909
26.909
52.388
23.812
28.575
20.638
20.638
41.275
130
138
104
104
250
169
189
136
136
320
13,200
14,000
10,600
10,600
25,500
17,300
19,300
13,900
13,900
33,000
3,500
3,600
3,200
3,200
3,200
4,700
4,800
4,200
4,200
4,300
44.983
82.931
93.264
23.812
30.162
25.400
30.302
19.050
23.812
76.0
102
98.0
134
7,750
10,400
10,000
13,700
4,500
4,000
6,000
5,300
45.000
85.000
88.900
20.638
20.638
21.692
22.225
17.462
16.513
69.5
76.5
79.5
90.5
7,100
7,800
8,100
9,250
4,400
4,100
5,800
5,500
45.237
87.312
30.162
30.886
23.812
94.0
9,600
12,000
4,400
5,900
45.242
73.431
77.788
19.558
19.842
19.812
19.842
15.748
15.080
54.0
57.5
76.0
73.5
5,550
5,850
7,750
7,500
4,800
4,600
6,400
6,200
45.618
82.550
82.931
83.058
85.000
23.812
23.812
23.876
23.812
25.400
25.400
25.400
25.400
19.050
19.050
19.114
19.050
76.0
76.0
76.0
76.0
98.0
98.0
98.0
98.0
7,750
7,750
7,750
7,750
10,000
10,000
10,000
10,000
4,500
4,500
4,500
4,500
6,000
6,000
6,000
6,000
45.987
74.976
18.000
18.000
14.000
51.0
71.0
5,200
7,250
4,700
6,300
46.038
79.375
82.931
85.000
85.000
90.119
93.264
95.250
17.462
23.812
20.638
25.400
23.000
30.162
27.783
17.462
25.400
21.692
25.608
21.692
30.302
29.900
13.495
19.050
17.462
20.638
21.808
23.812
22.225
45.5
76.0
69.5
79.0
69.5
102
108
56.0
98.0
79.5
104
79.5
134
129
4,600
7,750
7,100
8,050
7,100
10,400
11,000
5,700
10,000
8,100
10,600
8,100
13,700
13,200
4,600
4,500
4,400
4,400
4,400
4,000
4,200
6,200
6,000
5,800
5,800
5,800
5,300
5,600
47.625
88.900
88.900
93.264
95.250
96.838
101.600
104.775
20.638
25.400
30.162
30.162
21.000
34.925
30.162
22.225
25.400
30.302
29.370
21.946
36.068
29.317
16.513
19.050
23.812
23.020
15.875
26.988
24.605
76.5
82.0
102
109
78.0
135
115
90.5
101
134
147
96.5
165
148
7,800
8,350
10,400
11,100
7,950
13,800
11,700
9,250
10,300
13,700
15,000
9,850
16,800
15,000
4,100
4,200
4,000
4,000
3,700
3,800
3,500
5,500
5,600
5,300
5,300
5,000
5,000
4,700
117
and 2.
B-170
r1a
dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db
ras 2.3
ras 5.6
min 3.56
15
min
4.75
Bearing numbers

Load Constant
Axial
center
load factors
mm
mm
ras
r1as
max
max
da
db
Da
Db
4T-45280/45220
4T-HM807040/HM807010
4T-55175C/55437
4T-55176C/55437
4T-6277/6220
55
66
70
65
67
54
59
64
65
60
93
89
92
92
108
99
100
105
105
117
0.8
3.5
3.5
0.8
3.5
3.3
3.3
3.3
3.3
3.3
4T-25584/25520
4T-3776/3720
53
59
51
53
74
82
77
88
1.5
3.5
4T-358/354A
4T-367/362A
53
55
50
51
77
81
80
84
4T-3586/3525
58
52
75
4T-LM102949/LM102910
4T-LM603049/LM603011
56
57
50
50
4T-25590/25519
4T-25590/25520
4T-25590/25522
4T-25590/25526
58
58
58
58
4T-LM503349A/LM503310
kg
Y2
Yo
7.9
7.4
7.41
7.41
19.5
0.33
0.49
0.88
0.88
0.30
1.80
1.23
0.68
0.68
2.01
0.99
0.68
0.37
0.37
1.11
1.35
1.62
1.45
1.09
3.58
0.8
3.3
6.2
8.3
0.33
0.34
1.79
1.77
0.99
0.97
0.555
0.952
1.5
2
1.3
1.3
5.1
4.0
0.31
0.32
1.96
1.88
1.08
1.03
0.505
0.595
81
3.5
3.3
10.0
0.31
1.96
1.08
0.765
68
71
70
74
3.5
3.5
0.8
0.8
4.7
2.2
0.31
0.43
1.97
1.41
1.08
0.77
0.307
0.372
51
51
51
51
73
74
73
74
77
77
77
78
3.5
3.5
3.5
3.5
2
0.8
2
2.3
6.2
6.2
6.2
6.2
0.33
0.33
0.33
0.33
1.79
1.79
1.79
1.79
0.99
0.99
0.99
0.99
0.534
0.543
0.545
0.581
57
51
67
71
1.5
1.9
0.40
1.49
0.82
0.296
4T-18690/18620
4T-25592/25520
4T-359A/354A
4T-2984/2924
4T-359S/352
4T-3777/3720
4T-436/432
56
58
57
58
55
60
59
51
52
51
52
51
53
52
71
74
77
76
78
82
83
74
77
80
80
82
88
87
2.8
3.5
3.5
3.5
2.3
3.5
3.5
1.5
0.8
1.3
1.3
2.3
3.3
2.3
2.2
6.2
5.1
6.4
5.1
8.3
9.2
0.37
0.33
0.31
0.35
0.31
0.34
0.28
1.60
1.79
1.96
1.73
1.96
1.77
2.11
0.88
0.99
1.08
0.95
1.08
0.97
1.16
0.329
0.538
0.489
0.615
0.651
0.934
0.927
4T-369A/362A
4T-M804048/M804010
4T-3778/3720
4T-HM804846/HM804810
4T-386A/382A
4T-528/522
4T-463/453X
60
57
67
66
56
62
65
53
56
55
57
55
55
56
81
77
82
81
89
89
92
84
85
88
91
92
95
98
3.5
0.8
6.4
3.5
0.8
3.5
4.8
1.3
3.3
3.3
3.3
0.8
3.3
3.3
4.0
1.7
8.3
3.7
3.1
12.9
7.1
0.32
0.55
0.34
0.55
0.35
0.29
0.34
1.88
1.10
1.77
1.10
1.69
2.10
1.79
1.03
0.60
0.97
0.60
0.93
1.16
0.98
0.559
0.662
0.898
0.978
0.72
1.3
1.24
Note: 3. Chamfer dimensions of bearings marked "" are shown in drawings.

B-171
Mass
(approx.)

Inch system sizes
J system series
T
r1
r
B
d
d 47.62550.800mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
B
Limiting speeds
static
kgf
Cr
Cor
rpm
Cr
Cor
grease
oil
47.625
104.775
111.125
123.825
30.162
30.162
36.512
30.958
26.909
32.791
23.812
20.638
25.400
130
104
154
169
136
188
13,200
10,600
15,700
17,300
13,900
19,200
3,500
3,200
2,900
4,700
4,200
3,900
48.412
95.250
95.250
30.162
30.162
29.370
29.370
23.020
23.020
109
109
147
147
11,100
11,100
15,000
15,000
4,000
4,000
5,300
5,300
49.212
93.264
103.188
104.775
114.300
114.300
30.162
43.658
36.512
44.450
44.450
30.302
44.475
36.512
44.450
44.450
23.812
36.512
28.575
34.925
36.068
102
174
138
186
203
134
232
189
225
261
10,400
17,700
14,000
19,000
20,700
13,700
23,600
19,300
23,000
26,600
4,000
3,800
3,600
3,600
3,500
5,300
5,000
4,800
4,800
4,700
49.987
82.550
92.075
114.300
21.590
24.608
44.450
22.225
25.400
44.450
16.510
19.845
36.068
69.5
83.5
203
94.0
116
261
7,100
8,550
20,700
9,600
11,800
26,600
4,300
4,000
3,500
5,700
5,300
4,700
50.000
82.000
84.000
88.900
88.900
90.000
105.000
110.000
21.500
22.000
20.638
20.638
28.000
37.000
22.000
21.500
22.000
22.225
22.225
28.000
36.000
21.996
17.000
17.500
16.513
16.513
23.000
29.000
18.824
69.5
69.5
76.5
76.5
106
138
89.5
94.0
94.5
90.5
90.5
141
189
120
7,100
7,100
7,800
7,800
10,800
14,000
9,150
9,600
9,600
9,250
9,250
14,400
19,300
12,300
4,300
4,300
4,100
4,100
4,100
3,600
3,200
5,700
5,700
5,500
5,500
5,400
4,800
4,300
50.800
82.550
85.000
88.900
88.900
88.900
90.000
92.075
93.264
93.264
95.250
95.250
96.838
97.630
98.425
21.590
17.462
17.462
20.638
20.638
20.000
24.608
30.162
30.162
27.783
30.162
21.000
24.608
30.162
22.225
17.462
17.462
22.225
22.225
22.225
25.400
30.302
30.302
28.575
30.302
21.946
24.608
30.302
16.510
13.495
13.495
16.513
16.513
15.875
19.845
23.812
23.812
22.225
23.812
15.875
19.446
23.812
69.5
49.5
49.5
76.5
76.5
76.5
83.5
102
102
107
102
78.0
88.5
102
94.0
65.0
65.0
90.5
90.5
90.5
116
134
134
139
134
96.5
128
134
7,100
5,050
5,050
7,800
7,800
7,800
8,550
10,400
10,400
10,900
10,400
7,950
9,000
10,400
9,600
6,600
6,600
9,250
9,250
9,250
11,800
13,700
13,700
14,200
13,700
9,850
13,000
13,700
4,300
4,200
4,200
4,100
4,100
4,100
4,000
4,000
4,000
3,900
4,000
3,700
3,700
4,000
5,700
5,600
5,600
5,500
5,500
5,500
5,300
5,300
5,300
5,200
5,300
5,000
4,900
5,300
B-172
r1a

dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Bearing numbers
Load Constant
Axial
center
load factors
mm
mm
ras
r1as
max
max
da
db
Da
Db
4T-45282/45220
4T-55187C/55437
4T-72188C/72487
63
69
69
57
62
67
93
92
102
99
105
116
3.5
3.5
0.8
3.3
3.3
3.3
4T-HM804848/HM804810
4T-HM804849/HM804810
63
66
57
57
81
81
91
91
2.3
3.5
4T-3781/3720
4T-5395/5335
4T-HM807044/HM807010
4T-65390/65320
4T-HH506348/HH506310
62
66
69
70
71
56
60
63
60
61
82
89
89
97
97
88
97
100
107
107
4T-LM104947A/LM104911
4T-28579/28521
4T-HH506349/HH506310
55
60
72
55
56
61
75
83
97
4T-JLM104948/JLM104910
4T-JLM704649/JLM704610
4T-365/362A
4T-366/362A
4T-JM205149/JM205110
4T-JHM807045/JHM807012
4T-396/394A
60
62
58
59
62
69
61
55
56
55
55
57
63
60
4T-LM104949/LM104911
4T-18790/18720
4T-18790/18724
4T-368/362A
4T-370A/362A
4T-368A/362
4T-28580/28521
4T-3775/3720
4T-3780/3720
4T-33889/33821
4T-3780/3726
4T-385A/382A
4T-28678/28622
4T-3780/3732
62
62
62
58
65
62
63
58
64
64
64
61
65
64
55
56
56
56
56
56
57
58
58
58
58
60
58
58
Mass
kg
Y2
Yo
7.9
7.41
1.51
0.33
0.88
0.74
1.80
0.68
0.81
0.99
0.37
0.45
1.29
1.4
2.16
3.3
3.3
3.7
3.7
0.55
0.55
1.10
1.10
0.60
0.60
0.967
0.964
3.5
3.5
3.5
3.5
3.5
3.3
3.3
3.3
3.3
3.3
8.3
16.1
7.4
12.5
13.3
0.34
0.30
0.49
0.43
0.40
1.77
2.02
1.23
1.39
1.49
0.97
1.11
0.68
0.77
0.82
0.877
1.75
1.52
2.23
2.33
78
87
107
0.5
2.3
3.5
1.3
0.8
3.3
5.8
4.6
13.3
0.31
0.38
0.40
1.97
1.59
1.49
1.08
0.87
0.82
0.434
0.718
2.27
76
76
81
81
80
90
101
78
80
84
84
85
100
104
3
3.5
2
2.3
3
3
0.8
0.5
1.5
1.3
1.3
2.5
2.5
1.3
5.4
2.3
4.0
4.0
7.4
7.5
0.7
0.31
0.44
0.32
0.32
0.33
0.49
0.40
1.97
1.37
1.88
1.88
1.82
1.23
1.49
1.08
0.75
1.03
1.03
1.00
0.68
0.82
0.42
0.466
0.53
0.529
0.752
1.52
1.06
75
77
78
81
81
81
83
82
82
85
83
89
88
84
78
80
82
84
84
84
87
88
88
90
89
92
92
90
3.5
3.5
3.5
1.5
5
3.5
3.5
0.8
3.5
3.5
3.5
2.3
3.5
3.5
1.3
1.5
1.3
1.3
1.3
2
0.8
3.3
3.3
2.3
3.3
0.8
0.8
3.3
5.8
0.8
0.8
4.0
4.0
4.0
4.6
8.3
8.3
8.0
8.3
3.1
3.3
8.3
0.31
0.41
0.41
0.32
0.32
0.32
0.38
0.34
0.34
0.33
0.34
0.35
0.40
0.34
1.97
1.48
1.48
1.88
1.88
1.88
1.59
1.77
1.77
1.82
1.77
1.69
1.49
1.77
1.08
0.81
0.81
1.03
1.03
1.03
0.87
0.97
0.97
1.00
0.97
0.93
0.82
0.97
0.419
0.374
0.431
0.519
0.511
0.525
0.703
0.852
0.848
0.876
0.903
0.676
0.852
0.993
B-173
(approx.)

Inch system sizes
J system series
T
r1
r
B
d
d 50.80055.000mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
B
Limiting speeds
static
kgf
Cr
Cor
110
135
115
130
138
143
141
104
104
119
138
130
172
154
158
136
165
148
169
189
178
177
136
136
174
195
153
213
188
216
rpm
Cr
Cor
grease
oil
11,200
13,800
11,700
13,200
14,000
14,500
14,400
10,600
10,600
12,200
14,100
13,200
17,500
15,700
16,100
13,900
16,800
15,000
17,300
19,300
18,100
18,100
13,900
13,900
17,800
19,800
15,600
21,700
19,200
22,000
3,700
3,800
3,500
3,500
3,600
3,700
3,600
3,200
3,200
3,200
3,200
3,300
3,300
2,900
3,000
5,000
5,000
4,700
4,700
4,800
4,900
4,800
4,200
4,200
4,300
4,200
4,400
4,400
3,900
4,100
7,800
9,250
4,100
5,500
50.800
101.600
101.600
104.775
104.775
104.775
104.775
107.950
111.125
112.712
112.712
112.712
117.475
120.650
123.825
123.825
31.750
34.925
30.162
30.162
36.512
36.512
36.512
30.162
30.162
30.162
30.162
33.338
41.275
36.512
38.100
31.750
36.068
29.317
30.958
36.512
36.512
36.957
28.575
26.909
30.048
30.162
31.750
41.275
32.791
36.678
25.400
26.988
24.605
23.812
28.575
28.575
28.575
20.638
20.638
23.812
23.812
23.812
31.750
25.400
30.162
51.592
88.900
20.638
22.225
16.513
76.5
52.388
92.075
93.264
95.250
24.608
30.162
27.783
25.400
30.302
28.575
19.845
23.812
22.225
83.5
102
107
116
134
139
8,550
10,400
10,900
11,800
13,700
14,200
4,000
4,000
3,900
5,300
5,300
5,200
53.975
88.900
95.250
96.838
104.775
104.775
107.950
120.650
122.238
122.238
123.825
123.825
130.175
140.030
19.050
27.783
21.000
30.162
36.512
36.512
41.275
33.338
43.658
36.512
38.100
36.512
36.512
19.050
28.575
21.946
30.958
36.512
36.957
41.275
31.750
43.764
32.791
36.678
33.338
33.236
13.492
22.225
15.875
23.812
28.575
28.575
31.750
23.812
36.512
25.400
30.162
23.812
23.520
61.0
107
78.0
130
138
141
172
134
194
154
158
156
171
82.5
139
96.5
169
189
177
213
163
283
188
216
186
212
6,200
10,900
7,950
13,200
14,000
14,400
17,500
13,700
19,700
15,700
16,100
15,900
17,400
8,450
14,200
9,850
17,300
19,300
18,100
21,700
16,600
28,900
19,200
22,000
19,000
21,600
4,000
3,900
3,700
3,500
3,600
3,600
3,300
3,100
3,100
2,900
3,000
2,700
2,600
5,300
5,200
5,000
4,700
4,800
4,800
4,400
4,200
4,100
3,900
4,100
3,600
3,400
54.488
104.775
36.512
36.512
28.575
138
189
14,000
19,300
3,600
4,800
55.000
90.000
23.000
23.000
18.500
109
7,900
11,100
3,900
5,300
77.5
90.5
2. Bearing numbers marked "" designate J-series bearings. The tolerances of these bearings is listed in Table 6.6 on page A-40.
B-174
r1a

dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Bearing numbers
Load Constant
Axial
center
load factors
mm
mm
ras
r1as
max
max
3.5
0.8
0.8
6.4
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
da
db
Da
Db
4T-49585/49520
4T-529/522
4T-455/453X
4T-45284/45220
4T-HM807046/HM807010
4T-59200/59412
4T-537/532X
4T-HM907643/HM907614
4T-55200C/55443
4T-3975/3920
4T-39575/39520
4T-66200/66462
4T-619/612
4T-72200C/72487
4T-555/552A
66
59
60
71
70
68
65
74
71
68
68
71
67
77
66
59
58
59
59
63
61
59
65
65
61
61
65
61
67
62
88
89
92
93
89
92
94
91
92
99
101
100
105
102
109
96
95
98
99
100
99
100
105
106
106
107
111
110
116
116
4T-368S/362A
59
56
81
84
4T-28584/28521
4T-3767/3720
4T-33890/33821
65
63
61
58
59
59
83
82
85
87
88
90
4T-LM806649/LM806610
4T-33895/33822
4T-389A/382A
4T-45287/45220
4T-HM807049/HM807010
4T-539/532X
4T-621/612
4T-66584/66520
4T-5578/5535
4T-72212C/72487
4T-557S/552A
4T-HM911242/HM911210
4T-78214C/78551
63
63
61
62
73
68
70
75
73
79
71
79
79
60
60
60
62
63
61
63
68
67
67
65
74
77
80
86
89
93
89
94
105
105
106
102
109
109
117
4T-HM807048/HM807010
73
63
4T-JLM506849/JLM506810
63
61
kg
Y2
Yo
7.1
12.9
7.1
7.9
7.4
9.6
12.3
7.21
7.41
4.5
6.6
0.4
14.4
1.51
9.4
0.40
0.29
0.34
0.33
0.49
0.40
0.30
0.88
0.88
0.40
0.34
0.63
0.31
0.74
0.35
1.50
2.10
1.79
1.80
1.23
1.49
2.02
0.68
0.68
1.49
1.77
0.96
1.91
0.81
1.73
0.82
1.16
0.98
0.99
0.68
0.82
1.11
0.37
0.37
0.82
0.97
0.53
1.05
0.45
0.95
1.13
1.24
1.19
1.22
1.49
1.44
1.55
1.36
1.34
1.53
1.54
1.67
2.3
2.1
2.34
1.3
4.0
0.32
1.88
1.03
0.507
3.5
2.3
1.5
0.8
3.3
2.3
4.6
8.3
8.0
0.38
0.34
0.33
1.59
1.77
1.82
0.87
0.97
1.00
0.677
0.819
0.851
85
90
92
99
100
100
110
116
116
116
116
124
132
2.3
1.5
0.8
0.8
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
0.8
2
0.8
0.8
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
2.3
2.21
8.0
3.1
7.9
7.4
12.3
14.4
1.81
13.3
1.51
9.4
5.21
8.51
0.55
0.33
0.35
0.33
0.49
0.30
0.31
0.67
0.36
0.74
0.35
0.82
0.87
1.10
1.82
1.69
1.80
1.23
2.02
1.91
0.90
1.67
0.81
1.73
0.73
0.69
0.60
1.00
0.93
0.99
0.68
1.11
1.05
0.50
0.92
0.45
0.95
0.40
0.38
0.437
0.824
0.633
1.17
1.41
1.47
2.21
1.79
2.64
2.03
2.26
2.27
2.77
89
100
3.5
3.3
7.4
0.49
1.23
0.68
1.40
82
86
1.5
0.5
2.8
0.40
1.49
0.82
0.558
B-175
Mass
(approx.)

Inch system sizes
J system series
T
r1
r
B
d
d 55.00060.000mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
Limiting speeds
static
kgf
rpm
Cr
Cor
Cr
Cor
grease
oil
55.000
95.000
96.838
110.000
29.000
21.000
39.000
29.000
21.946
39.000
23.500
15.875
32.000
107
78.0
173
144
96.5
219
10,900
7,950
17,600
14,700
9,850
22,400
3,800
3,700
3,500
5,100
5,000
4,600
55.562
97.630
123.825
127.000
24.608
36.512
36.512
24.608
32.791
36.512
19.446
25.400
26.988
88.5
154
163
128
188
228
9,000
15,700
16,600
13,000
19,200
23,300
3,700
2,900
2,900
4,900
3,900
3,800
55.575
96.838
21.000
21.946
15.875
78
96.5
7,950
9,850
3,700
5,000
57.150
96.838
96.838
96.838
96.838
97.630
104.775
104.775
104.775
107.950
110.000
110.000
112.712
112.712
112.712
117.475
117.475
120.650
123.825
123.825
140.030
21.000
21.000
21.000
21.000
24.608
30.162
30.162
30.162
27.783
22.000
27.795
30.162
30.162
30.162
30.162
33.338
41.275
36.512
38.100
36.512
21.946
21.946
21.946
21.946
24.608
29.317
29.317
30.958
29.317
21.996
29.317
30.048
30.162
30.162
30.162
31.750
41.275
32.791
36.678
33.236
15.875
15.875
15.875
15.875
19.446
24.605
24.605
23.812
22.225
18.824
27.000
23.812
23.812
23.812
23.812
23.812
31.750
25.400
30.162
23.520
78
78
78
78
88.5
115
115
130
115
89.5
115
119
138
138
117
130
172
154
158
171
96.5
96.5
96.5
96.5
128
148
148
169
148
120
148
174
195
195
175
153
213
188
216
212
7,950
7,950
7,950
7,950
9,000
11,700
11,700
13,200
11,700
9,150
11,700
12,200
14,100
14,100
11,900
13,200
17,500
15,700
16,100
17,400
9,850
9,850
9,850
9,850
13,000
15,000
15,000
17,300
15,000
12,300
15,000
17,800
19,800
19,800
17,900
15,600
21,700
19,200
22,000
21,600
3,700
3,700
3,700
3,700
3,700
3,500
3,500
3,500
3,500
3,200
3,500
3,200
3,200
3,200
3,000
3,300
3,300
2,900
3,000
2,600
5,000
5,000
5,000
5,000
4,900
4,700
4,700
4,700
4,700
4,300
4,700
4,300
4,200
4,200
4,000
4,400
4,400
3,900
4,100
3,400
57.531
96.838
21.000
21.946
15.875
78.0
96.5
7,950
9,850
3,700
5,000
59.972
122.238
33.338
31.750
23.812
134
163
13,700
16,600
3,100
4,200
59.987
146.050
41.275
39.688
25.400
199
234
20,300
23,900
2,400
3,200
60.000
95.000
107.950
24.000
25.400
24.000
25.400
19.000
19.050
122
140
8,500
9,350
12,400
14,200
3,700
3,200
4,900
4,300
83.0
91.5
B-176
r1a

dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Bearing numbers
Load Constant
Axial
center
load factors
mm
mm
Mass
kg
ras
r1as
max
max
Y2
Yo
(approx.)
da
db
Da
Db
64
65
71
62
61
64
85
89
97
91
92
104
1.5
2.3
3
2.5
0.8
2.5
7.6
3.1
11.7
0.33
0.35
0.35
1.79
1.69
1.73
0.99
0.93
0.95
0.82
0.616
1.71
4T-28680/28622
4T-72218C/72487
4T-HM813840/HM813810
68
80
76
62
67
70
88
102
111
92
116
121
3.5
3.5
3.5
0.8
3.3
3.3
3.3
1.51
3.7
0.40
0.74
0.50
1.49
0.81
1.20
0.82
0.45
0.66
0.774
1.99
2.34
4T-389/382A
65
61
89
92
2.3
0.8
3.1
0.35
1.69
0.93
0.608
4T-387/382A
4T-387A/382A
4T-387AS/382A
4T-387S/382A
4T-28682/28622
4T-462/453X
4T-469/453X
4T-45289/45220
4T-469/453A
4T-390/394A
4T-469/454
4T-3979/3920
4T-39580/39520
4T-39581/39520
4T-33225/33462
4T-66225/66462
4T-623/612
4T-72225C/72487
4T-555S/552A
4T-78225/78551
66
69
72
63
70
67
70
65
70
70
70
72
72
81
74
76
72
81
73
83
62
62
62
62
63
63
63
65
63
66
63
66
66
66
68
69
66
67
67
77
89
89
89
89
88
92
92
93
97
101
96
99
101
101
104
100
105
102
109
117
92
92
92
92
92
98
98
99
100
104
100
106
107
107
112
111
110
116
116
132
2.3
3.5
5
0.8
3.5
2.3
3.5
0.8
3.5
2.3
3.5
3.5
3.5
8
3.5
3.5
3.5
3.5
3.5
3.5
0.8
0.8
0.8
0.8
0.8
3.3
3.3
3.3
0.8
1.3
2
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
2.3
3.1
3.1
3.1
3.1
3.3
7.1
7.1
7.9
7.1
0.7
7.1
4.5
6.6
6.6
2.6
0.4
14.4
1.51
9.4
8.51
0.35
0.35
0.35
0.35
0.40
0.34
0.34
0.33
0.34
0.40
0.34
0.40
0.34
0.34
0.44
0.63
0.31
0.74
0.35
0.87
1.69
1.69
1.69
1.69
1.49
1.79
1.79
1.80
1.79
1.49
1.79
1.49
1.77
1.77
1.38
0.96
1.91
0.81
1.73
0.69
0.93
0.93
0.93
0.93
0.82
0.98
0.98
0.99
0.98
0.82
0.98
0.82
0.97
0.97
0.76
0.53
1.05
0.45
0.95
0.38
0.583
0.581
0.576
0.585
0.747
1.06
1.06
1.1
1.11
0.954
1.24
1.4
1.41
1.4
1.58
1.54
2.12
1.96
2.18
2.69
4T-388A/382A
69
63
89
92
3.5
0.8
3.1
0.35
1.69
0.93
0.575
4T-66589/66520
74
73
105
116
0.8
3.3
1.81
0.67
0.90
0.50
1.66
4T-H913840/H913810
88
82
124
138
3.5
3.3
4.31
0.78
0.77
0.42
3.22
75
75
66
68
85
96
91
103
5
3.5
2.5
3.3
3.0
0.6
0.40
0.46
1.49
1.31
0.82
0.72
0.606
0.992
4T-JM207049/JM207010
4T-385/382A
4T-JH307749/JH307710
4T-JLM508748/JLM508710
4T-29580/29520
B-177

Inch system sizes
J system series
T
r1
r
B
d
d 60.00065.000mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
B
Cr
Limiting speeds
static
kgf
Cor
rpm
Cr
Cor
grease
oil
60.000
110.000
130.000
22.000
34.100
21.996
30.924
18.824
22.650
89.5
156.0
120
186
9,150
15,900
12,300
19,000
3,200
2,700
4,300
3,600
60.325
100.000
112.712
122.238
122.238
123.825
127.000
127.000
130.175
25.400
30.162
38.100
43.658
38.100
36.512
44.450
36.512
25.400
30.048
38.354
43.764
36.678
36.512
44.450
33.338
19.845
23.812
29.718
36.512
30.162
26.988
34.925
23.812
90.5
119
187
194
158
163
203
156
134
174
244
283
216
228
263
186
9,200
12,200
19,100
19,700
16,100
16,600
20,700
15,900
13,600
17,800
24,900
28,900
22,000
23,300
26,800
19,000
3,500
3,200
3,100
3,100
3,000
2,900
3,100
2,700
4,700
4,300
4,100
4,100
4,100
3,800
4,200
3,600
61.912
110.000
136.525
146.050
22.000
46.038
41.275
21.996
46.038
39.688
18.824
36.512
25.400
89.5
224
199
120
355
234
9,150
22,800
20,300
12,300
36,500
23,900
3,200
2,600
2,400
4,300
3,500
3,200
61.976
101.600
24.608
24.608
19.845
90.5
134
9,200
13,600
3,500
4,700
62.738
101.600
25.400
25.400
19.845
90.5
134
9,200
13,600
3,500
4,700
63.500
94.458
107.950
107.950
110.000
110.000
112.712
112.712
120.000
120.000
122.238
122.238
123.825
127.000
127.000
136.525
140.030
19.050
25.400
25.400
22.000
25.400
30.162
30.162
29.794
29.794
38.100
43.658
38.100
36.512
36.512
41.275
36.512
19.050
25.400
25.400
21.996
25.400
30.048
30.162
29.007
29.007
38.354
43.764
36.678
36.170
36.512
41.275
33.236
15.083
19.050
19.050
18.824
19.050
23.812
23.812
24.237
24.237
29.718
36.512
30.162
28.575
26.988
31.750
23.520
60.5
91.5
91.5
89.5
91.5
119
138
128
128
187
194
158
163
163
194
171
103
140
140
120
140
174
195
177
177
244
283
216
229
228
262
212
6,150
9,350
9,350
9,150
9,350
12,200
14,100
13,000
13,000
19,100
19,700
16,100
16,600
16,600
19,800
17,400
10,500
14,200
14,200
12,300
14,200
17,800
19,800
18,100
18,100
24,900
28,900
22,000
23,300
23,300
26,700
21,600
3,600
3,200
3,200
3,200
3,200
3,200
3,200
3,000
3,000
3,100
3,100
3,000
2,900
2,900
2,800
2,600
4,800
4,300
4,300
4,300
4,300
4,300
4,200
4,000
4,000
4,100
4,100
4,100
3,800
3,800
3,800
3,400
65.000
105.000
110.000
24.000
28.000
23.000
28.000
18.500
22.500
85.0
119
117
174
8,700
12,200
11,900
17,800
3,300
3,200
4,500
4,300
2. Bearing numbers marked "" designate J-series bearings. The accuracy of these bearings is listed in Table 6.6 on page A-40.
B-178
r1a

dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Bearing numbers
Load Constant
Axial
center
load factors
mm
mm
ras
r1as
max
max
da
db
Da
Db
4T-397/394A
4T-JHM911244/JHM911211
69
84
68
74
101
109
104
123
0.8
3.5
1.3
3.3
4T-28985/28921
4T-3980/3920
4T-HM212044/HM212011
4T-5583/5535
4T-558/552A
4T-HM813841/HM813810
4T-65237/65500
4T-HM911245/HM911210
73
75
85
78
73
80
82
87
67
68
70
72
69
73
71
74
89
99
108
106
109
111
107
109
96
106
116
116
116
121
119
124
3.5
3.5
8
3.5
2.3
3.5
3.5
5
4T-392/394A
4T-H715334/H715311
4T-H913842/H913810
70
86
90
69
79
82
101
118
124
104
132
138
4T-28990/28920
72
68
90
4T-28995/28920
75
69
4T-L610549/L610510
4T-29585/29520
4T-29586/29520
4T-390A/394A
4T-29585/29521
4T-3982/3920
4T-39585/39520
4T-477/472
4T-483/472
4T-HM212046/HM212011
4T-5584/5535
4T-559/552A
4T-565/563
4T-HM813842/HM813810
4T-639/632
4T-78250/78551
71
77
73
73
77
77
77
73
78
80
81
78
80
82
81
85
4T-JLM710949/JLM710910
4T-JM511946/JM511910
77
78
kg
Y2
Yo
0.7
7.61
0.40
0.82
1.49
0.73
0.82
0.40
0.91
2.01
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
2.5
4.5
11.1
13.3
9.4
3.7
9.3
5.21
0.43
0.40
0.34
0.36
0.35
0.50
0.49
0.82
1.41
1.49
1.78
1.67
1.73
1.20
1.23
0.73
0.78
0.82
0.98
0.92
0.95
0.66
0.68
0.40
0.772
1.33
2.02
2.44
2.1
2.21
2.65
2.12
0.8
3.5
3.5
1.3
3.3
3.3
0.7
8.7
4.31
0.40
0.47
0.78
1.49
1.27
0.77
0.82
0.70
0.42
0.879
3.47
3.17
97
3.3
1.7
0.43
1.41
0.78
0.768
90
97
3.5
3.3
2.5
0.43
1.41
0.78
0.764
69
71
71
70
71
71
71
72
72
73
75
72
73
76
74
79
86
96
96
101
99
99
101
107
107
108
106
109
112
111
118
117
91
103
103
104
104
106
107
114
114
116
116
116
120
121
125
132
1.5
3.5
1.5
1.5
3.5
3.5
3.5
0.8
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.3
1.5
3.3
3.3
1.3
1.3
3.3
3.3
2
2
3.3
3.3
3.3
3.3
3.3
3.3
2.3
0.61
0.6
0.6
0.7
0.6
4.5
6.6
3.9
3.9
11.1
13.3
9.4
8.3
3.7
11.4
8.51
0.42
0.46
0.46
0.40
0.46
0.40
0.34
0.38
0.38
0.34
0.36
0.35
0.36
0.50
0.36
0.87
1.41
1.31
1.31
1.49
1.31
1.49
1.77
1.56
1.56
1.78
1.67
1.73
1.65
1.20
1.66
0.69
0.78
0.72
0.72
0.82
0.72
0.82
0.97
0.86
0.86
0.98
0.92
0.95
0.91
0.66
0.91
0.38
0.449
0.924
0.929
0.851
0.982
1.26
1.27
1.49
1.48
1.95
2.34
2.01
2.11
2.12
2.85
2.54
71
72
96
99
101
105
3
3
1
2.5
0.3
3.4
0.45
0.40
1.32
1.49
0.73
0.82
0.742
1.08
B-179
Mass
(approx.)

Inch system sizes
J system series
T
r1
r
B
d
d 65.00070.000mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
B
Cr
Limiting speeds
static
kgf
Cor
rpm
Cr
Cor
grease
oil
65.000
120.000
39.000
38.500
32.000
185
248
18,800
25,300
3,100
4,100
65.088
135.755
53.975
56.007
44.450
278
380
28,300
38,500
2,900
3,800
66.675
103.213
107.950
110.000
112.712
112.712
112.712
122.238
123.825
127.000
130.175
135.755
136.525
136.525
17.602
25.400
22.000
30.162
30.162
30.162
38.100
38.100
36.512
41.275
53.975
41.275
41.275
17.602
25.400
21.996
30.048
30.048
30.162
38.354
36.678
36.512
41.275
56.007
41.275
41.275
11.989
19.050
18.824
23.812
23.812
23.812
29.718
30.162
26.988
31.750
44.450
31.750
31.750
60.0
91.5
89.5
119
119
138
187
158
163
194
278
194
226
78.0
140
120
174
174
195
244
216
228
262
380
262
293
6,100
9,350
9,150
12,200
12,200
14,100
19,100
16,100
16,600
19,800
28,300
19,800
23,100
8,000
14,200
12,300
17,800
17,800
19,800
24,900
22,000
23,300
26,700
38,500
26,700
29,900
3,300
3,200
3,200
3,200
3,200
3,200
3,100
3,000
2,900
2,800
2,900
2,800
2,700
4,400
4,300
4,300
4,300
4,300
4,200
4,100
4,100
3,800
3,800
3,800
3,800
3,700
68.262
110.000
120.000
123.825
136.525
136.525
22.000
29.794
38.100
41.275
46.038
21.996
29.007
36.678
41.275
46.038
18.824
24.237
30.162
31.750
36.512
89.5
128
158
226
224
120
177
216
293
355
9,150
13,000
16,100
23,100
22,800
12,300
18,100
22,000
29,900
36,500
3,200
3,000
3,000
2,700
2,600
4,300
4,000
4,100
3,700
3,500
69.850
112.712
117.475
120.000
120.000
120.650
127.000
136.525
146.050
150.089
168.275
25.400
30.162
29.794
32.545
25.400
36.512
41.275
41.275
44.450
53.975
25.400
30.162
29.007
32.545
25.400
36.170
41.275
41.275
46.672
56.363
19.050
23.812
24.237
26.195
19.050
28.575
31.750
31.750
36.512
41.275
95.5
117
128
147
95.5
163
194
206
261
340
151
175
177
214
151
229
262
295
360
460
9,750
11,900
13,000
15,000
9,750
16,600
19,800
21,000
26,600
34,500
15,400
17,900
18,100
21,800
15,400
23,300
26,700
30,000
37,000
46,500
3,100
3,000
3,000
3,000
3,100
2,900
2,800
2,500
2,400
2,200
4,100
4,000
4,000
4,000
4,100
3,800
3,800
3,300
3,200
3,000
69.952
121.442
24.608
23.012
17.462
91.0
127
9,300
13,000
2,900
3,800
70.000
110.000
115.000
26.000
29.000
25.000
29.000
20.500
23.000
97.0
124
150
171
9,900
12,700
15,300
17,500
3,200
3,100
4,200
4,100
B-180
r1a

dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Bearing numbers
Load Constant
Axial
center
load factors
mm
mm
ras
r1as
max
max
Y2
Yo
Mass
kg
da
db
Da
Db
80
74
107
114
2.5
10.9
0.34
1.78
0.98
1.90
4T-6379/6320
84
77
117
126
3.5
3.3
18.8
0.32
1.85
1.02
3.71
4T-L812148/L812111
4T-29590/29520
4T-395A/394A
4T-3984/3925
4T-3994/3920
4T-39590/39520
4T-HM212049/HM212010
4T-560/552A
4T-HM813844/HM813810
4T-641/633
4T-6386/6320
4T-641/632
4T-H414242/H414210
74
80
73
80
84
80
82
81
85
83
87
83
85
72
73
73
74
74
74
75
75
78
77
77
77
81
96
96
101
101
99
101
110
109
111
116
117
118
121
99
103
104
106
106
107
116
116
121
124
126
125
129
1.5
3.5
0.8
3.5
5.5
3.5
3.5
3.5
3.5
3.5
4.3
3.5
3.5
0.8
3.3
1.3
0.8
3.3
3.3
1.5
3.3
3.3
3.3
3.3
3.3
3.3
3.71
0.6
0.7
4.5
4.5
6.6
11.1
9.4
3.7
11.4
18.8
11.4
11.0
0.49
0.46
0.40
0.40
0.40
0.34
0.34
0.35
0.50
0.36
0.32
0.36
0.36
1.23
1.31
1.49
1.49
1.49
1.77
1.78
1.73
1.20
1.66
1.85
1.66
1.67
0.68
0.72
0.82
0.82
0.82
0.97
0.98
0.95
0.66
0.91
1.02
0.91
0.92
0.48
0.86
0.796
1.19
1.18
1.19
1.86
1.92
2.03
2.41
3.64
2.74
2.75
4T-399A/394A
4T-480/472
4T-560S/552A
4T-H414245/H414210
4T-H715343/H715311
78
82
83
86
90
74
75
76
82
84
101
107
109
121
118
104
114
116
129
132
2.3
3.5
3.5
3.5
3.5
1.3
2
3.3
3.3
3.3
0.7
3.9
9.4
11.0
8.7
0.40
0.38
0.35
0.36
0.47
1.49
1.56
1.73
1.67
1.27
0.82
0.86
0.95
0.92
0.70
0.764
1.37
1.87
2.7
3.24
4T-29675/29620
4T-33275/33462
4T-482/472
4T-47487/47420
4T-29675/29630
4T-566/563
4T-643/632
4T-655/653
4T-745A/742
4T-835/832
80
84
83
84
80
85
86
88
88
91
77
77
77
78
77
78
80
82
82
84
101
104
107
107
104
112
118
131
134
149
109
112
114
114
113
120
125
139
142
155
1.5
3.5
3.5
3.5
1.5
3.5
3.5
3.5
3.5
3.5
3.3
3.3
2
3.3
3.3
3.3
3.3
3.3
3.3
3.3
0.91
2.6
3.9
6.1
0.91
8.3
11.4
8.0
12.0
18.5
0.49
0.44
0.38
0.36
0.49
0.36
0.36
0.41
0.33
0.30
1.23
1.38
1.56
1.67
1.23
1.65
1.66
1.47
1.84
2.00
0.68
0.76
0.86
0.92
0.68
0.91
0.91
0.81
1.01
1.10
0.949
1.28
1.33
1.47
1.17
1.92
2.63
3.28
3.92
6.13
4T-34274/34478
81
78
110
116
1.21
0.45
1.33
0.73
1.11
78
83
77
77
98
103
105
110
1
3
2.5
2.5
0.31
2.5
0.49
0.43
1.23
1.39
0.68
0.77
0.889
1.13
4T-JH211749/JH211710
4T-JLM813049/JLM813010
4T-JM612949/JM612910
B-181
(approx.)

Inch system sizes
J system series
T
r1
r
B
d
d 70.00076.200mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
B
Cr
Limiting speeds
static
kgf
Cor
rpm
Cr
Cor
grease
oil
70.000
120.000
150.000
29.794
41.275
29.007
39.688
24.237
25.400
128
199
177
234
13,000
20,300
18,100
23,900
3,000
2,400
4,000
3,200
71.438
117.475
120.000
127.000
136.525
136.525
136.525
30.162
32.545
36.512
41.275
41.275
46.038
30.162
32.545
36.170
41.275
41.275
46.038
23.812
26.195
28.575
31.750
31.750
36.512
117
147
163
194
226
224
175
214
229
262
293
355
11,900
15,000
16,600
19,800
23,100
22,800
17,900
21,800
23,300
26,700
29,900
36,500
3,000
3,000
2,900
2,800
2,700
2,600
4,000
4,000
3,800
3,800
3,700
3,500
73.025
112.712
117.475
127.000
139.992
149.225
150.089
25.400
30.162
36.512
36.512
53.975
44.450
25.400
30.162
36.170
36.098
54.229
46.672
19.050
23.812
28.575
28.575
44.450
36.512
95.5
117
163
178
287
261
151
175
229
265
410
360
9,750
11,900
16,600
18,100
29,300
26,600
15,400
17,900
23,300
27,100
41,500
37,000
3,100
3,000
2,900
2,600
2,500
2,400
4,100
4,000
3,800
3,400
3,400
3,200
73.817
112.712
127.000
25.400
36.512
25.400
36.170
19.050
28.575
95.5
163
151
229
9,750
16,600
15,400
23,300
3,100
2,900
4,100
3,800
74.612
139.992
36.512
36.098
28.575
178
265
18,100
27,100
2,600
3,400
75.000
115.000
120.000
145.000
25.000
31.000
51.000
25.000
29.500
51.000
19.000
25.000
42.000
94.5
131
287
143
197
410
9,650
13,300
29,300
14,600
20,100
41,500
3,000
2,900
2,500
4,000
3,900
3,400
76.200
109.538
121.442
121.442
127.000
133.350
133.350
135.733
136.525
139.992
139.992
146.050
149.225
150.089
19.050
24.608
24.608
30.162
33.338
39.688
44.450
30.162
36.512
36.512
41.275
53.975
44.450
19.050
23.012
23.012
31.000
33.338
39.688
46.100
29.769
36.098
36.098
41.275
54.229
46.672
15.083
17.462
17.462
22.225
26.195
32.545
34.925
22.225
28.575
28.575
31.750
44.450
36.512
63.0
91.0
91.0
135
153
177
211
129
178
178
206
287
261
115
127
127
194
235
305
330
189
265
265
295
410
360
6,450
9,300
9,300
13,800
15,600
18,000
21,600
13,200
18,100
18,100
21,000
29,300
26,600
11,700
13,000
13,000
19,800
24,000
31,000
34,000
19,300
27,100
27,100
30,000
41,500
37,000
3,100
2,900
2,900
2,800
2,600
2,600
2,700
2,600
2,600
2,600
2,500
2,500
2,400
4,100
3,800
3,800
3,700
3,500
3,500
3,500
3,500
3,400
3,400
3,300
3,400
3,200
B-182
r1a

dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Bearing numbers
Load Constant
Axial
center
load factors
mm
mm
ras
r1as
max
max
da
db
Da
Db
4T-484/472
4T-JH913848/JH913811
80
92
77
82
107
126
114
146
2
2
2
3.3
4T-33281/33462
4T-47490/47420
4T-567A/563
4T-644/632
4T-H414249/H414210
4T-H715345/H715311
85
86
86
87
89
93
79
79
80
81
83
87
104
107
112
118
121
118
112
114
120
125
129
132
3.5
3.5
3.5
3.5
3.5
3.5
4T-29685/29620
4T-33287/33462
4T-567/563
4T-576/572
4T-6460/6420
4T-744/742
86
87
88
90
93
91
80
80
81
83
87
85
101
104
112
125
129
134
109
112
120
133
140
142
4T-29688/29620
4T-568/563
83
83
80
82
101
112
4T-577/572
91
85
4T-JLM714149/JLM714110
4T-JM714249/JM714210
4T-JH415647/JH415610
87
88
94
4T-L814749/L814710
4T-34300/34478
4T-34301/34478
4T-42687/42620
4T-47678/47620
4T-HM516442/HM516410
4T-5760/5735
4T-495A/493
4T-575/572
4T-575S/572
4T-659/653
4T-6461A/6420
4T-748S/742
84
86
89
90
97
93
94
92
92
99
93
108
93
kg
Y2
Yo
3.9
4.31
0.38
0.78
1.56
0.77
0.86
0.42
1.33
3.08
3.3
3.3
3.3
3.3
3.3
3.3
2.6
6.1
8.3
11.4
11.0
8.7
0.44
0.36
0.36
0.36
0.36
0.47
1.38
1.67
1.65
1.66
1.67
1.27
0.76
0.92
0.91
0.91
0.92
0.70
1.24
1.42
1.87
2.57
2.58
3.11
3.5
3.5
3.5
3.5
3.5
3.5
3.3
3.3
3.3
3.3
3.3
3.3
0.91
2.6
8.3
5.5
14.8
12.0
0.49
0.44
0.36
0.40
0.36
0.33
1.23
1.38
1.65
1.49
1.66
1.84
0.68
0.76
0.91
0.82
0.91
1.01
0.873
1.19
1.82
2.53
4.42
3.79
109
120
1.5
0.8
3.3
3.3
0.91
8.3
0.49
0.36
1.23
1.65
0.68
0.91
0.86
1.80
125
133
3.5
3.3
5.5
0.40
1.49
0.82
2.48
81
83
89
104
108
129
110
115
139
3
3
3
2.5
2.5
2.5
0.31
1.9
14.1
0.46
0.44
0.36
1.31
1.35
1.66
0.72
0.74
0.91
0.875
1.29
3.81
82
83
83
84
85
87
88
86
86
86
87
89
87
100
110
110
114
119
118
119
122
125
125
131
129
134
105
116
116
121
128
128
130
130
133
133
139
140
142
1.5
2
3.5
3.5
6.4
3.5
3.5
3.5
3.5
6.8
3.5
9.7
3.5
1.5
2
2
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
5.01
1.21
1.21
2.8
3.9
7.5
11.0
0.7
5.5
5.5
8.0
14.8
12.0
0.50
0.45
0.45
0.42
0.40
0.40
0.41
0.44
0.40
0.40
0.41
0.36
0.33
1.20
1.33
1.33
1.43
1.48
1.49
1.48
1.35
1.49
1.49
1.47
1.66
1.84
0.66
0.73
0.73
0.79
0.82
0.82
0.81
0.74
0.82
0.82
0.81
0.91
1.01
0.579
0.982
0.977
1.46
1.92
2.43
2.75
1.83
2.43
2.41
3.04
4.23
3.66
B-183
Mass
(approx.)

Inch system sizes
J system series
T
r1
r
B
d
d 76.20083.345mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
B
Cr
Limiting speeds
static
kgf
Cor
rpm
Cr
Cor
grease
oil
76.200
149.225
161.925
180.975
190.500
53.975
53.975
53.975
57.150
54.229
55.100
53.183
57.531
44.450
42.862
35.720
46.038
287
310
325
445
410
460
415
610
29,300
31,500
33,000
45,000
41,500
47,000
42,500
62,000
2,500
2,300
1,900
1,900
3,400
3,000
2,600
2,600
77.788
117.475
121.442
127.000
136.525
136.525
25.400
24.608
30.162
30.162
46.038
25.400
23.012
31.000
29.769
46.038
19.050
17.462
22.225
22.225
36.512
99.5
91.0
135
129
224
162
127
194
189
355
10,200
9,300
13,800
13,200
22,800
16,500
13,000
19,800
19,300
36,500
2,900
2,900
2,800
2,600
2,600
3,900
3,800
3,700
3,500
3,500
79.375
146.050
161.925
190.500
41.275
47.625
57.150
41.275
48.260
57.531
31.750
38.100
46.038
206
270
445
295
385
610
21,000
27,500
45,000
30,000
39,000
62,000
2,500
2,300
1,900
3,300
3,100
2,600
80.000
130.000
35.000
34.000
28.500
166
249
16,900
25,400
2,700
3,600
80.962
133.350
136.525
139.992
150.089
33.338
30.162
36.512
44.450
33.338
29.769
36.098
46.672
26.195
22.225
28.575
36.512
153
129
178
261
235
189
265
360
15,600
13,200
18,100
26,600
24,000
19,300
27,100
37,000
2,600
2,600
2,600
2,400
3,500
3,500
3,400
3,200
82.550
125.412
133.350
133.350
136.525
139.992
139.992
146.050
150.089
152.400
152.400
161.925
161.925
168.275
25.400
33.338
39.688
30.162
36.512
36.512
41.275
44.450
39.688
41.275
47.625
53.975
53.975
25.400
33.338
39.688
29.769
36.098
36.098
41.275
46.672
36.322
41.275
48.260
55.100
56.363
19.845
26.195
32.545
22.225
28.575
28.575
31.750
36.512
30.162
31.750
38.100
42.862
41.275
102
153
177
129
178
178
206
261
180
206
270
310
340
163
235
305
189
265
265
295
360
279
295
385
460
460
10,400
15,600
18,000
13,200
18,100
18,100
21,000
26,600
18,300
21,000
27,500
31,500
34,500
16,600
24,000
31,000
19,300
27,100
27,100
30,000
37,000
28,400
30,000
39,000
47,000
46,500
2,700
2,600
2,600
2,600
2,600
2,600
2,500
2,400
2,300
2,500
2,300
2,300
2,200
3,600
3,500
3,500
3,500
3,400
3,400
3,300
3,200
3,100
3,300
3,100
3,000
3,000
83.345
125.412
125.412
125.412
25.400
25.400
25.400
25.400
25.400
25.400
19.845
19.845
19.845
102
102
102
163
163
163
10,400
10,400
10,400
16,600
16,600
16,600
2,700
2,700
2,700
3,600
3,600
3,600
and 2.
B-184
r1a

dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Bearing numbers
Load Constant
Axial
center
load factors
mm
mm
ras
r1as
max
max
da
db
Da
Db
4T-6461/6420
4T-6576/6535
4T-H917840/H917810
4T-HH221430/HH221410
96
99
110
101
89
92
100
95
129
141
152
171
140
154
170
179
3.5
3.5
3.5
3.5
3.3
3.3
3.3
3.3
4T-LM814849/LM814810
4T-34306/34478
4T-42690/42620
4T-495AS/493
4T-H715348/H715311
91
90
91
93
98
85
84
85
87
88
105
110
114
122
118
113
116
121
130
132
3.5
3.5
3.5
3.5
3.5
4T-661/653
4T-756A/752
4T-HH221431/HH221410
96
106
103
90
91
97
131
144
171
139
150
179
4T-JM515649/JM515610
94
88
117
4T-47681/47620
4T-496/493
4T-581/572
4T-740/742
95
95
96
101
89
89
90
91
4T-27687/27620
4T-47686/47620
4T-HM516448/HM516410
4T-495/493
4T-580/572
4T-582/572
4T-663/653
4T-749A/742
4T-595/592A
4T-663/652
4T-757/752
4T-6559C/6535
4T-842/832
96
97
105
97
98
104
99
99
100
99
100
104
101
4T-27689/27620
4T-27690/27620
4T-27691/27620
90
96
102
Mass
kg
Y2
Yo
14.8
12.8
0.51
14.4
0.36
0.40
0.73
0.33
1.66
1.50
0.82
1.79
0.91
0.82
0.45
0.99
4.26
5.44
6.57
8.69
3.3
2
3.3
3.3
3.3
2.31
1.21
2.8
0.7
8.7
0.51
0.45
0.42
0.44
0.47
1.18
1.33
1.43
1.35
1.27
0.65
0.73
0.79
0.74
0.70
0.932
0.943
1.41
1.78
2.84
3.5
8
3.5
3.3
3.3
3.3
8.0
12.0
14.4
0.41
0.34
0.33
1.47
1.76
1.79
0.81
0.97
0.99
2.91
4.55
8.52
125
2.5
4.9
0.39
1.54
0.85
1.73
119
122
125
134
128
130
133
142
3.5
3.5
3.5
5
3.3
3.3
3.3
3.3
3.9
0.7
5.5
12.0
0.40
0.44
0.40
0.33
1.48
1.35
1.49
1.84
0.82
0.74
0.82
1.01
1.78
1.69
2.26
3.43
89
90
92
90
91
91
92
93
93
92
94
98
94
115
119
118
122
125
125
131
134
135
134
144
141
149
120
128
128
130
133
133
139
142
144
141
150
154
155
3.5
3.5
6.8
3.5
3.5
6.8
3.5
3.5
3.5
3.5
3.5
3.5
3.5
1.5
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
0.61
3.9
7.5
0.7
5.5
5.5
8.0
12.0
2.6
8.0
12.0
12.8
18.5
0.42
0.40
0.40
0.44
0.40
0.40
0.41
0.33
0.44
0.41
0.34
0.40
0.30
1.44
1.48
1.49
1.35
1.49
1.49
1.47
1.84
1.36
1.47
1.76
1.50
2.00
0.79
0.82
0.82
0.74
0.82
0.82
0.81
1.01
0.75
0.81
0.97
0.82
1.10
1.07
1.72
2.16
1.64
2.2
2.19
2.78
3.37
3.02
3.15
4.42
5.09
5.46
90
90
90
115
115
115
120
120
120
0.8
3.5
6.4
1.5
1.5
1.5
0.61
0.61
0.61
0.42
0.42
0.42
1.44
1.44
1.44
0.79
0.79
0.79
1.06
1.05
1.04
B-185
(approx.)

Inch system sizes
J system series
T
r1
r
B
d
d 84.13895.000mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
B
Cr
Limiting speeds
static
kgf
Cor
rpm
Cr
Cor
grease
oil
84.138
136.525
30.162
29.769
22.225
129
189
13,200
19,300
2,600
3,500
85.000
130.000
140.000
30.000
39.000
29.000
38.000
24.000
31.500
135
197
214
297
13,700
20,100
21,900
30,500
2,600
2,500
3,500
3,400
85.026
150.089
44.450
46.672
36.512
261
360
26,600
37,000
2,400
3,200
85.725
133.350
142.138
146.050
152.400
161.925
30.162
42.862
41.275
39.688
47.625
29.769
42.862
41.275
36.322
48.260
22.225
34.133
31.750
30.162
38.100
129
216
206
180
270
189
350
295
279
385
13,200
22,000
21,000
18,300
27,500
19,300
35,500
30,000
28,400
39,000
2,600
2,500
2,500
2,300
2,300
3,500
3,300
3,300
3,100
3,100
87.960
148.430
28.575
28.971
21.433
138
215
14,100
21,900
2,300
3,100
88.900
121.442
123.825
148.430
152.400
161.925
161.925
168.275
15.083
20.638
28.575
39.688
47.625
53.975
53.975
15.083
20.638
28.971
36.322
48.260
55.100
56.363
11.112
16.670
21.433
30.162
38.100
42.862
41.275
56.5
80.0
138
180
270
310
340
88.0
141
215
279
385
460
460
5,750
8,150
14,100
18,300
27,500
31,500
34,500
9,000
14,400
21,900
28,400
39,000
47,000
46,500
2,700
2,700
2,300
2,300
2,300
2,300
2,200
3,600
3,500
3,100
3,100
3,100
3,000
3,000
89.974
146.975
40.000
40.000
32.500
227
340
23,200
34,500
2,400
3,200
90.000
145.000
155.000
190.000
35.000
44.000
50.800
34.000
44.000
46.038
27.000
35.500
31.750
189
270
281
279
385
365
19,300
27,500
28,700
28,400
39,000
37,000
2,400
2,300
1,800
3,200
3,100
2,400
90.488
161.925
47.625
48.260
38.100
270
385
27,500
39,000
2,300
3,100
92.075
146.050
152.400
168.275
33.338
39.688
41.275
34.925
36.322
41.275
26.195
30.162
30.162
163
180
222
266
279
340
16,700
18,300
22,700
27,100
28,400
35,000
2,400
2,300
2,100
3,100
3,100
2,800
93.662
148.430
28.575
28.971
21.433
138
215
14,100
21,900
2,300
3,100
95.000
150.000
35.000
34.000
27.000
180
279
18,300
28,400
2,300
3,100
2. For the inner bore diameter of bearings with bearing numbers marked "" (inner ring) or "" (outer ring), this value applies only to high precision types, Class 4 and 2.
B-186
r1a

dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Bearing numbers
Load Constant
Axial
center
load factors
mm
mm
ras
r1as
max
max
da
db
Da
Db
98
91
122
130
3.5
3.3
104
100
92
94
117
125
125
134
6
3
4T-749/742
101
95
134
142
4T-497/492A
4T-HM617049/HM617010
4T-665/653
4T-596/592A
4T-758/752
99
106
102
102
103
93
95
95
96
97
120
125
131
135
144
4T-42346/42584
103
98
4T-LL217849/LL217810
4T-L217849/L217810
4T-42350/42584
4T-593/592A
4T-759/752
4T-6580/6535
4T-850/832
97
97
104
104
106
109
106
4T-HM218248/HM218210
Mass
kg
Y2
Yo
0.7
0.44
1.35
0.74
1.6
2.5
2.5
0.2
5.9
0.44
0.41
1.35
1.47
0.74
0.81
1.37
2.3
3.5
3.3
12.0
0.33
1.84
1.01
3.25
128
137
139
144
150
3.5
4.8
3.5
3.5
3.5
3.3
3.3
3.3
3.3
3.3
0.7
6.9
8.0
2.6
12.0
0.44
0.43
0.41
0.44
0.34
1.35
1.39
1.47
1.36
1.76
0.74
0.76
0.81
0.75
0.97
1.43
2.69
2.65
2.9
4.26
134
142
3.01
0.49
1.22
0.67
1.99
94
94
98
98
99
102
100
115
116
134
135
144
141
149
117
119
142
144
150
154
155
1.5
1.5
3
3.5
3.5
3.5
3.5
1.5
1.5
3
3.3
3.3
3.3
3.3
2.91
0.71
3.01
2.6
12.0
12.8
18.5
0.33
0.33
0.49
0.44
0.34
0.40
0.30
1.81
1.82
1.22
1.36
1.76
1.50
2.00
1.00
1.00
0.67
0.75
0.97
0.82
1.10
0.452
0.737
1.96
2.78
4.09
4.73
5.08
112
99
133
141
3.5
8.6
0.33
1.80
0.99
2.55
105
106
120
99
100
112
131
140
162
139
148
179
3
3
3.5
2.5
2.5
3.3
2.0
10.1
12.91
0.44
0.34
0.87
1.35
1.76
0.69
0.74
0.97
0.38
2.14
3.32
6.32
4T-760/752
107
101
144
150
3.5
3.3
12.0
0.34
1.76
0.97
4.01
4T-47890/47820
4T-598A/592A
4T-681/672
107
113
110
101
101
104
131
135
149
140
144
160
3.5
6.4
3.5
3.3
3.3
3.3
0.6
2.6
3.0
0.45
0.44
0.47
1.34
1.36
1.28
0.74
0.75
0.70
2.08
2.63
3.87
4T-42368/42584
107
102
134
142
3.01
0.49
1.22
0.67
1.8
109
104
135
143
2.5
1.7
0.44
1.36
0.75
2.19
4T-498/493
4T-JM716648/JM716610
4T-JHM516849/JHM516810
4T-JM718149/JM718110
4T-JHM318448/JHM318410
4T-J90354/J90748
4T-JM719149/JM719113
B-187
(approx.)

Inch system sizes
J system series
T
r1
r
B
d
d 95.250
109.538mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
B
Cr
Limiting speeds
static
kgf
Cor
rpm
Cr
Cor
grease
oil
95.250
130.175
146.050
147.638
148.430
152.400
157.162
168.275
190.500
20.638
33.338
35.717
28.575
39.688
36.512
41.275
57.150
21.433
34.925
36.322
28.971
36.322
36.116
41.275
57.531
16.670
26.195
26.192
21.433
30.162
26.195
30.162
46.038
81.0
163
180
138
180
188
222
445
147
266
279
215
279
305
340
610
8,300
16,700
18,300
14,100
18,300
19,200
22,700
45,000
15,000
27,100
28,400
21,900
28,400
31,000
35,000
62,000
2,500
2,400
2,300
2,300
2,300
2,200
2,100
1,900
3,300
3,100
3,100
3,100
3,100
2,900
2,800
2,600
96.838
148.430
188.912
28.575
50.800
28.971
46.038
21.433
31.750
138
281
215
365
14,100
28,700
21,900
37,000
2,300
1,800
3,100
2,400
98.425
157.162
168.275
36.512
41.275
36.116
41.275
26.195
30.162
188
222
305
340
19,200
22,700
31,000
35,000
2,200
2,100
2,900
2,800
99.974
212.725
66.675
66.675
53.975
575
810
58,500
82,500
1,700
2,300
100.000
155.000
36.000
35.000
28.000
192
310
19,600
31,500
2,200
2,900
100.012
157.162
36.512
36.116
26.195
188
305
19,200
31,000
2,200
2,900
101.600
157.162
168.275
180.975
190.500
190.500
190.500
212.725
212.725
36.512
41.275
47.625
57.150
57.150
57.150
66.675
66.675
36.116
41.275
48.006
57.531
57.531
57.531
66.675
66.675
26.195
30.162
38.100
44.450
46.038
46.038
53.975
53.975
188
222
285
380
445
445
475
575
305
340
430
555
610
610
695
810
19,200
22,700
29,100
38,500
45,000
45,000
48,500
58,500
31,000
35,000
44,000
56,500
62,000
62,000
71,000
82,500
2,200
2,100
2,000
2,000
1,900
1,900
1,800
1,700
2,900
2,800
2,700
2,600
2,600
2,600
2,300
2,300
104.775
180.975
47.625
48.006
38.100
285
430
29,100
44,000
2,000
2,700
107.950
158.750
159.987
165.100
212.725
23.020
34.925
36.512
66.675
21.438
34.925
36.512
66.675
15.875
26.988
26.988
53.975
102
167
191
475
166
320
315
695
10,400
17,100
19,500
48,500
17,000
33,000
32,000
71,000
2,100
2,100
2,100
1,800
2,800
2,800
2,700
2,300
109.538
158.750
23.020
21.438
15.875
102
166
10,400
17,000
2,100
2,800
and 2.
B-188
r1a

dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Bearing numbers
Load Constant
Axial
center
load factors
mm
mm
ras
r1as
max
max
da
db
Da
Db
4T-L319249/L319210
4T-47896/47820
4T-594A/592XE
4T-42375/42584
4T-594/592A
4T-52375/52618
4T-683/672
4T-HH221440/HH221410
103
110
113
108
110
112
113
125
101
103
104
103
104
105
106
110
122
131
135
134
135
142
149
171
125
140
142
142
144
152
160
179
1.5
3.5
5
3
3.5
3.5
3.5
8
1.5
3.3
0.8
3
3.3
3.3
3.3
3.3
4T-42381/42584
4T-90381/90744
110
125
104
113
134
161
142
179
3.5
3.5
3
3.3
4T-52387/52618
4T-685/672
114
116
108
109
142
149
152
160
3.5
3.5
3.3
3.3
4T-HH224334/HH224310
124
120
192
202
3.5
115
109
140
149
4T-52393/52618
116
109
142
4T-52400/52618
4T-687/672
4T-780/772
4T-861/854
4T-HH221449/HH221410
4T-HH221449A/HH221410
4T-941/932
4T-HH224335/HH224310
117
118
119
129
131
122
130
132
111
112
113
114
116
116
117
121
4T-782/772
122
4T-37425/37625
4T-LM522546/LM522510
4T-56425/56650
4T-936/932
4T-37431/37625
4T-JM720249/JM720210
Mass
kg
Y2
Yo
(approx.)
1.01
0.6
2.6
3.01
2.6
0.6
3.0
14.4
0.35
0.45
0.44
0.49
0.44
0.47
0.47
0.33
1.72
1.34
1.36
1.22
1.36
1.26
1.28
1.79
0.95
0.74
0.75
0.67
0.75
0.69
0.70
0.99
0.789
1.95
2.09
1.75
2.51
2.76
3.72
7.5
3.01
12.91
0.49
0.87
1.22
0.69
0.67
0.38
1.69
5.67
0.6
3.0
0.47
0.47
1.26
1.28
0.69
0.70
2.62
3.56
3.3
18.9
0.33
1.84
1.01
11.5
2.5
0.31
0.47
1.27
0.70
2.4
152
3.5
3.3
0.6
0.47
1.26
0.69
2.55
142
149
161
170
171
171
187
192
152
160
168
174
179
179
193
202
3.5
3.5
3.5
8
8
3.5
7
7
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
0.6
3.0
8.1
15.3
14.4
14.4
19.7
18.9
0.47
0.47
0.39
0.33
0.33
0.33
0.33
0.33
1.26
1.28
1.56
1.79
1.79
1.79
1.84
1.84
0.69
0.70
0.86
0.99
0.99
0.99
1.01
1.01
2.48
3.4
5.11
7
7.06
7.06
11.2
11.3
116
161
168
3.5
3.3
8.1
0.39
1.56
0.86
4.92
122
122
123
137
115
116
117
122
143
146
149
187
152
154
159
193
3.5
3.5
3.5
8
3.3
3.3
3.3
3.3
14.01
1.4
2.01
19.7
0.61
0.40
0.50
0.33
0.99
1.49
1.21
1.84
0.54
0.82
0.66
1.01
1.37
2.37
2.69
10.7
123
116
143
152
3.5
3.3
14.01
0.61
0.99
0.54
1.33
B-189

Inch system sizes
J system series
T
r1
r
B
d
d 109.987133.350mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
B
Cr
Limiting speeds
static
kgf
Cor
rpm
Cr
Cor
grease
oil
109.987
159.987
34.925
34.925
26.988
167
320
17,100
33,000
2,100
2,800
109.992
177.800
41.275
41.275
30.162
232
375
23,600
38,000
1,900
2,600
110.000
165.000
180.000
35.000
47.000
35.000
46.000
26.500
38.000
191
305
315
480
19,500
31,000
32,000
49,000
2,100
1,900
2,700
2,600
111.125
214.312
55.562
52.388
39.688
405
560
41,500
57,000
1,500
2,000
114.300
177.800
180.975
212.725
212.725
228.600
41.275
34.925
66.675
66.675
53.975
41.275
31.750
66.675
66.675
49.428
30.162
25.400
53.975
53.975
38.100
232
169
475
575
430
375
245
695
810
620
23,600
17,200
48,500
58,500
44,000
38,000
25,000
71,000
82,500
63,500
1,900
1,900
1,800
1,700
1,400
2,600
2,500
2,300
2,300
1,900
115.087
190.500
47.625
49.212
34.925
300
475
30,500
48,500
1,800
2,500
117.475
180.975
34.925
31.750
25.400
169
245
17,200
25,000
1,900
2,500
120.000
170.000
25.400
25.400
19.050
127
210
13,000
21,400
2,000
2,600
120.650
234.950
63.500
63.500
49.212
525
825
53,500
84,000
1,500
2,000
123.825
182.562
39.688
38.100
33.338
224
435
22,900
44,000
1,800
2,400
127.000
182.562
196.850
215.900
228.600
228.600
230.000
254.000
39.688
46.038
47.625
53.975
53.975
63.500
77.788
38.100
46.038
47.625
49.428
49.428
63.500
82.550
33.338
38.100
34.925
38.100
38.100
49.212
61.912
224
310
320
320
430
525
740
435
550
540
445
620
825
1,070
22,900
31,500
32,500
32,500
44,000
53,500
75,500
44,000
56,500
55,000
45,000
63,500
84,000
109,000
1,800
1,700
1,600
1,400
1,400
1,500
1,400
2,400
2,200
2,100
1,900
1,900
2,000
1,900
128.588
206.375
47.625
47.625
34.925
315
520
32,000
53,000
1,700
2,200
130.175
196.850
206.375
46.038
47.625
46.038
47.625
38.100
34.925
310
315
550
520
31,500
32,000
56,500
53,000
1,700
1,700
2,200
2,200
133.350
177.008
25.400
26.195
20.638
126
259
12,900
26,400
1,800
2,400
2. For the inner bore diameter of bearings with bearing numbers marked "" (inner ring) or "" (outer ring), this value applies only to high precision types, Class 4 and 2.
B-190
r1a

dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Bearing numbers
Load Constant
Axial
center
load factors
mm
mm
ras
r1as
max
max
da
db
Da
Db
4T-LM522548/LM522510
133
118
146
154
3.3
4T-64433/64700
128
121
160
172
3.5
124
127
119
122
149
162
159
172
4T-H924045/H924010
139
131
186
4T-64450/64700
4T-68450/68712
4T-938/932
4T-HH224346/HH224310
4T-HM926740/HM926710
131
130
141
143
146
125
123
128
131
142
4T-71453/71750
133
4T-68462/68712
Mass
kg
Y2
Yo
1.4
0.40
1.49
0.82
2.24
3.3
1.11
0.52
1.16
0.64
3.77
3
3
2.5
2.5
3.01
6.0
0.50
0.41
1.21
1.48
0.66
0.81
2.52
4.61
205
3.5
3.3
6.81
0.67
0.89
0.49
8.18
160
163
187
192
200
172
172
193
202
219
3.5
3.5
7
7
3.5
3.3
3.3
3.3
3.3
3.3
1.11
5.41
19.7
18.9
13.51
0.52
0.50
0.33
0.33
0.74
1.16
1.21
1.84
1.84
0.81
0.64
0.66
1.01
1.01
0.45
3.52
2.93
10.1
10.2
9.76
126
171
181
3.5
3.3
6.7
0.42
1.44
0.79
5.11
132
125
163
172
3.5
3.3
5.41
0.50
1.21
0.66
2.78
132
127
156
163
3.3
3.3
7.91
0.46
1.31
0.72
1.67
4T-95475/95925
149
137
209
217
6.4
3.3
14.0
0.37
1.62
0.89
4T-48286/48220
139
133
168
176
3.5
3.3
5.7
0.31
1.97
1.08
3.52
4T-48290/48220
4T-67388/67322
4T-74500/74850
4T-97500/97900
4T-HM926747/HM926710
4T-95500/95905
4T-HH228349/HH228310
141
144
148
151
156
154
164
135
138
141
144
143
142
148
168
180
196
197
200
207
223
176
189
208
213
219
217
234
3.5
3.5
3.5
3.5
3.5
6.4
9.7
3.3
3.3
3.3
3.3
3.3
3.3
6.4
0.31
0.34
0.49
0.74
0.74
0.37
0.32
1.97
1.74
1.23
0.81
0.81
1.62
1.87
1.08
0.96
0.68
0.45
0.45
0.89
1.03
3.33
5.1
7.05
8.43
8.83
12.9
19.5
4T-799/792
146
140
186
198
3.3
3.3
1.9
0.46
1.31
0.72
5.77
4T-67389/67322
4T-799A/792
146
148
141
142
180
186
189
198
3.5
3.5
3.3
3.3
6.3
1.9
0.34
0.46
1.74
1.31
0.96
0.72
4.87
5.65
4T-L327249/L327210
142
140
167
171
1.5
1.5
3.71
0.35
1.72
0.95
1.7
4T-JM822049/JM822010
4T-JHM522649/JHM522610
4T-JL724348/JL724314
5.7
6.3
2.21
13.41
13.51
14.0
23.4
B-191
(approx.)
12.6

Inch system sizes
J system series
T
r1
r
B
d
d 133.350196.850mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
B
Cr
Limiting speeds
static
kgf
Cor
rpm
Cr
Cor
grease
oil
133.350
190.500
196.850
196.850
215.900
234.950
39.688
46.038
46.038
47.625
63.500
39.688
46.038
46.038
47.625
63.500
33.338
38.100
38.100
34.925
49.212
236
310
310
320
525
475
550
550
540
825
24,100
31,500
31,500
32,500
53,500
48,500
56,500
56,500
55,000
84,000
1,700
1,700
1,700
1,600
1,500
2,300
2,200
2,200
2,100
2,000
136.525
190.500
228.600
39.688
57.150
39.688
57.150
33.338
44.450
236
445
475
735
24,100
45,500
48,500
75,000
1,700
1,500
2,300
2,000
139.700
215.900
228.600
254.000
47.625
57.150
66.675
47.625
57.150
66.675
34.925
44.450
47.625
320
445
550
540
735
910
32,500
45,500
56,000
55,000
75,000
92,500
1,600
1,500
1,400
2,100
2,000
1,800
142.875
200.025
200.025
41.275
41.275
39.688
39.688
34.130
34.130
239
239
490
490
24,300
24,300
50,000
50,000
1,600
1,600
2,100
2,100
146.050
193.675
254.000
28.575
66.675
28.575
66.675
23.020
47.625
165
550
340
910
16,800
56,000
35,000
92,500
1,600
1,400
2,200
1,800
152.400
192.088
222.250
25.000
46.830
24.000
46.830
19.000
34.925
130
315
261
585
13,200
32,000
26,700
60,000
1,600
1,500
2,100
2,000
158.750
205.583
225.425
23.812
41.275
23.812
39.688
18.258
33.338
126
254
247
555
12,900
25,900
25,200
56,500
1,500
1,400
2,000
1,900
165.100
225.425
41.275
39.688
33.338
254
555
25,900
56,500
1,400
1,900
170.000
230.000
39.000
38.000
31.000
282
520
28,700
53,000
1,400
1,800
177.800
227.012
247.650
30.162
47.625
30.162
47.625
23.020
38.100
181
340
415
690
18,500
35,000
42,000
70,500
1,300
1,300
1,800
1,700
180.000
250.000
47.000
45.000
37.000
370
710
37,500
72,500
1,300
1,700
190.000
260.000
46.000
44.000
36.500
365
720
37,000
73,500
1,200
1,600
196.850
241.300
23.812
23.017
17.462
160
330
16,300
33,500
1,200
1,600
B-192
r1a

dynamic
PrXFrYFa
Fa
Fa
Fr e
Fr e
X
Y
X
Y
1
0 0.4 Y2
static
Por0.5FrYoFa
ra
Da db
da Db

Bearing numbers
Load Constant
Axial
center
load factors
mm
mm
ras
r1as
max
max
da
db
Da
Db
4T-48385/48320
4T-67390/67322
4T-67391/67322
4T-74525/74850
4T-95525/95925
148
149
157
152
166
142
143
143
146
148
177
180
180
196
209
184
189
189
208
217
3.5
3.5
8
3.5
9.7
3.3
3.3
3.3
3.3
3.3
4T-48393/48320
4T-896/892
151
156
144
150
177
205
184
216
3.5
3.5
4T-74550/74850
4T-898/892
4T-99550/99100
158
160
170
151
153
156
196
205
227
208
216
238
4T-48684/48620
4T-48685/48620
166
158
151
151
185
185
4T-36690/36620
4T-99575/99100
155
175
153
162
4T-L630349/L630310
4T-M231648/M231610
162
178
4T-L432349/L432310
4T-46780/46720
4T-46790/46720
kg
Y2
Yo
4.0
6.3
6.3
2.21
14.0
0.32
0.34
0.34
0.49
0.37
1.87
1.74
1.74
1.23
1.62
1.03
0.96
0.96
0.68
0.89
3.64
4.63
4.59
6.56
11.3
3.3
3.3
4.0
6.0
0.32
0.42
1.87
1.43
1.03
0.78
3.43
9.07
3.5
3.5
7
3.3
3.3
3.3
2.21
6.0
12.1
0.49
0.42
0.41
1.23
1.43
1.47
0.68
0.78
0.81
6.05
8.76
14.3
193
193
8
3.5
3.3
3.3
3.1
3.1
0.34
0.34
1.78
1.78
0.98
0.98
3.85
3.89
182
227
188
238
1.5
7
1.5
3.3
5.01
12.1
0.37
0.41
1.63
1.47
0.90
0.81
2.27
13.5
158
163
183
207
187
213
2
8
2
1.5
10.01
5.9
0.42
0.33
1.44
1.8
0.79
0.99
1.53
5.72
168
176
166
169
195
209
199
218
1.5
3.5
1.5
3.3
9.81
2.61
0.37
0.38
1.61
1.57
0.88
0.86
1.89
5.2
181
174
209
218
3.5
3.3
2.61
0.38
1.57
0.86
4.69
184
178
217
224
2.5
4.71
0.38
1.57
0.86
4.37
188
194
186
188
214
229
221
240
1.5
3.5
1.5
3.3
12.81
4.81
0.44
0.44
1.36
1.36
0.75
0.75
2.92
6.57
4T-JM736149/JM736110
196
190
232
243
2.5
9.01
0.48
1.25
0.69
6.76
4T-JM738249/JM738210
206
200
242
252
2.5
10.91
0.48
1.26
0.69
6.85
4T-LL639249/LL639210
205
203
232
236
1.5
1.5
17.31
0.42
1.44
0.79
2.07
4T-JHM534149/JHM534110
4T-36990/36920
4T-67790/67720
B-193
Mass
(approx.)
Multi-Row Tapered Roller Bearings

Outward facing type
B1
C
r1
r
d 4070mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
1
Limiting speeds
static
kgf
rpm
r1s min
Cr
Cor
Cr
Cor
grease
oil
1.5
1.5
2
2
0.6
0.6
0.6
0.6
105
136
132
157
134
187
171
204
10,700
13,900
13,500
16,000
13,700
19,100
17,400
20,800
4,100
4,100
3,200
3,700
5,500
5,500
4,200
4,900
37.5
43.5
41.5
49.5
1.5
1.5
2
2
0.6
0.6
0.6
0.6
116
141
165
191
157
200
218
251
11,800
14,300
16,800
19,500
16,000
20,400
22,200
25,600
3,700
3,700
2,800
3,300
4,900
4,900
3,800
4,400
49
55
64
64
90
39.5
43.5
43.5
51.5
71.5
1.5
1.5
2.5
2.5
2.5
0.6
0.6
0.6
0.6
0.6
132
150
194
227
315
186
218
260
305
465
13,500
15,300
19,800
23,200
32,000
18,900
22,200
26,600
31,000
47,500
3,400
3,400
2,600
3,000
3,000
4,500
4,500
3,500
4,000
4,000
55
100
100
120
120
120
51
60
70
70
97
41.5
48.5
49
57
76
2
2
2.5
2.5
2.5
0.6
0.6
0.6
0.6
0.6
160
186
226
266
370
221
269
305
360
550
16,300
18,900
23,100
27,100
37,500
22,600
27,400
31,500
36,500
56,000
3,100
3,100
2,400
2,700
2,700
4,100
4,100
3,100
3,700
3,700
60
110
110
130
130
130
53
66
74
74
104
43.5
54.5
51
59
81
2
2
3
3
3
0.6
0.6
1
1
1
180
223
258
310
420
249
330
350
420
625
18,300
22,700
26,300
31,500
42,500
25,400
33,500
36,000
43,000
64,000
2,800
2,800
2,200
2,500
2,500
3,800
3,800
2,900
3,400
3,400
65
120
120
140
140
140
56
73
79
79
108
46.5
61.5
53
63
84
2
2
3
3
3
0.6
0.6
1
1
1
211
273
297
350
470
295
410
410
475
700
21,500
27,800
30,500
35,500
47,500
30,000
42,000
41,500
48,500
71,500
2,600
2,600
2,000
2,300
2,300
3,500
3,500
2,700
3,100
3,100
70
125
125
150
150
150
59
74
83
83
116
48.5
61.5
57
67
92
2
2
3
3
3
0.6
0.6
1
1
1
225
285
330
395
530
325
440
460
545
805
23,000
29,000
33,500
40,000
54,000
33,000
45,000
46,500
55,500
82,500
2,400
2,400
1,900
2,200
2,200
3,200
3,200
2,500
2,900
2,900
B1
rs min
40
80
80
90
90
45
55
56
56
37.5
43.5
39.5
45.5
45
85
85
100
100
47
55
60
60
50
90
90
110
110
110
1 Minimum allowable dimension for chamfer dimension r or r1.
B-194
Sb
r1a
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Bearing numbers
Load
center
mm
mm
da
Db
Sb
ras
r1as
min
min
min
max
max
4T-430208X
4T-432208X
4T-430308DX
4T-430308
48.5
48.5
50
50
75
75
86.5
82
3.5
5.5
8
5
1.5
1.5
2
2
0.6
0.6
0.6
0.6
4T-430209
4T-432209
4T-430309DX
4T-430309
53.5
53.5
55
55
80
81
96
93
4.5
5.5
9
5
1.5
1.5
2
2
4T-430210
432210U
4T-430310DX
4T-430310
432310U
58.5
58.5
62
62
62
85
85
105
102
102
4.5
5.5
10
6
9
4T-430211X
432211U
4T-430311DX
430311XU
432311U
65
65
67
67
67
94
95
113
111
111
4T-430212X
432212U
4T-430312DX
430312U
432312U
70
70
74
74
74
4T-430213X
432213U
4T-430313DX
430313XU
432313U
4T-430214
432214U
4T-430314DX
430314XU
432314U
Axial load factors
Mass
kg
Y1
Y2
Yo
38.5
43
64.5
44.5
0.37
0.37
0.83
0.35
1.80
1.80
0.82
1.96
2.68
2.68
1.22
2.91
1.76
1.76
0.80
1.91
0.929
1.18
1.56
1.61
0.6
0.6
0.6
0.6
42
46
70
47.5
0.40
0.40
0.83
0.35
1.67
1.67
0.82
1.96
2.48
2.48
1.22
2.91
1.63
1.63
0.80
1.91
1.04
1.27
2.11
2.11
1.5
1.5
2
2
2
0.6
0.6
0.6
0.6
0.6
44.5
47.5
75
51
62.5
0.42
0.42
0.83
0.35
0.35
1.61
1.61
0.82
1.96
1.96
2.39
2.39
1.22
2.91
2.91
1.57
1.57
0.80
1.91
1.91
1.18
1.36
2.65
2.72
3.98
4.5
5.5
10.5
6.5
10.5
2
2
2
2
2
0.6
0.6
0.6
0.6
0.6
47
51
83
55.5
66.5
0.40
0.40
0.83
0.35
0.35
1.67
1.67
0.82
1.96
1.96
2.48
2.48
1.22
2.91
2.91
1.63
1.63
0.80
1.91
1.91
1.55
1.85
3.42
3.48
5.05
103
104
124
120
120
4.5
5.5
11.5
7.5
11.5
2
2
2.5
2.5
2.5
0.6
0.6
1
1
1
49.5
56
88.5
59.5
71
0.40
0.40
0.83
0.35
0.35
1.67
1.67
0.82
1.96
1.96
2.48
2.48
1.22
2.91
2.91
1.63
1.63
0.80
1.91
1.91
1.99
2.49
4.22
4.31
6.29
75
75
79
79
79
113
115
133
130
130
4.5
5.5
13
8
12
2
2
2.5
2.5
2.5
0.6
0.6
1
1
1
53.5
61.5
94.5
64
74.5
0.40
0.40
0.83
0.35
0.35
1.67
1.67
0.82
1.96
1.96
2.48
2.48
1.22
2.91
2.91
1.63
1.63
0.80
1.91
1.91
2.49
3.33
5.16
5.32
7.55
80
80
84
84
84
118
119
142
140
140
5
6
13
8
12
2
2
2.5
2.5
2.5
0.6
0.6
1
1
1
57
64.5
101
67
80.5
0.42
0.42
0.83
0.35
0.35
1.61
1.61
0.82
1.96
1.96
2.39
2.39
1.22
2.91
2.91
1.57
1.57
0.80
1.91
1.91
2.67
3.56
6.23
6.37
9.28
B-195
Constant
(approx.)

Outward facing type
B1
C
r1
r
d 75105mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
1
Limiting speeds
static
kgf
rpm
r1s min
Cr
Cor
Cr
Cor
grease
oil
2
2
3
3
3
0.6
0.6
1
1
1
238
288
370
435
610
350
445
510
605
935
24,300
29,300
37,500
44,500
62,000
36,000
45,500
52,000
62,000
95,500
2,300
2,300
1,700
2,000
2,000
3,000
3,000
2,300
2,700
2,700
51.5
63.5
61
73
104
2.5
2.5
3
3
3
0.6
0.6
1
1
1
274
340
405
500
680
400
530
565
700
1,050
27,900
35,000
41,500
51,000
69,000
40,500
54,000
58,000
71,500
107,000
2,100
2,100
1,600
1,900
1,900
2,800
2,800
2,200
2,500
2,500
70
86
98
98
137
57
69
65
77
108
2.5
2.5
4
4
4
0.6
0.6
1
1
1
315
385
425
520
690
465
600
585
725
1,050
32,000
39,000
43,000
53,000
70,500
47,000
61,500
59,500
74,000
107,000
2,000
2,000
1,500
1,800
1,800
2,700
2,700
2,100
2,400
2,400
90
160
160
190
190
190
74
94
102
102
144
61
77
69
81
115
2.5
2.5
4
4
4
0.6
0.6
1
1
1
355
450
465
580
770
535
720
645
815
1,190
36,500
46,000
47,500
59,000
78,500
54,500
73,500
65,500
83,000
121,000
1,900
1,900
1,500
1,700
1,700
2,500
2,500
1,900
2,300
2,300
95
170
170
200
200
200
78
100
108
108
151
63
83
85
85
118
3
3
4
3
4
1
1
1
1
1
385
515
630
540
865
580
835
890
735
1,340
39,500
52,500
64,000
55,500
88,000
59,000
85,000
91,000
75,000
137,000
1,800
1,800
1,600
1,600
1,600
2,400
2,400
2,100
2,100
2,100
100
180
180
215
215
215
83
107
112
112
162
67
87
87
87
127
3
3
4
3
4
1
1
1
1
1
440
565
700
590
980
675
925
995
800
1,540
45,000
58,000
71,500
60,000
100,000
68,500
94,500
102,000
81,500
157,000
1,700
1,700
1,500
1,500
1,500
2,200
2,200
2,000
2,000
2,000
105
190
190
225
88
115
116
70
95
91
3
3
3
1
1
1
490
650
625
760
1,080
845
50,000
66,000
63,500
77,500
111,000
86,000
1,600
1,600
1,400
2,100
2,100
1,900
B1
rs min
75
130
130
160
160
160
62
74
87
87
125
51.5
61.5
59
69
99
80
140
140
170
170
170
64
78
92
92
131
85
150
150
180
180
180

Note: When incorporating bearings with bearing numbers marked with "", please consult NTN Engineering.
B-196
Sb
r1a
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Bearing numbers
Load
center
mm
mm
Constant
Axial load factors
Mass
kg
da
Db
Sb
ras
r1as
min
min
min
max
max
Y1
Y2
Yo
(approx.)
4T-430215
432215U
430315DU
430315XU
432315U
85
85
89
89
89
124
125
151
149
149
5
6
14
9
13
2
2
2.5
2.5
2.5
0.6
0.6
1
1
1
61.5
67
107
70.5
87.5
0.44
0.44
0.83
0.35
0.35
1.55
1.55
0.82
1.96
1.96
2.31
2.31
1.22
2.91
2.91
1.52
1.52
0.80
1.91
1.91
2.99
3.68
7.31
7.71
11.5
430216XU
432216XU
430316DU
430316XU
432316U
92
92
94
94
94
132
134
159
159
159
6
7
15.5
9.5
13.5
2
2
2.5
2.5
2.5
0.6
0.6
1
1
1
63
69.5
114
75.5
90.5
0.42
0.42
0.83
0.35
0.35
1.61
1.61
0.82
1.96
1.96
2.39
2.39
1.22
2.91
2.91
1.57
1.57
0.80
1.91
1.91
3.65
4.58
8.99
9.55
13.6
430217XU
432217XU
430317DU
430317XU
432317U
97
97
103
103
103
141
142
169
167
167
6.5
8.5
16.5
10.5
14.5
2
2
3
3
3
0.6
0.6
1
1
1
69
76
121
80
96
0.42
0.42
0.83
0.35
0.35
1.61
1.61
0.82
1.96
1.96
2.39
2.39
1.22
2.91
2.91
1.57
1.57
0.80
1.91
1.91
4.59
5.85
10.6
11.2
15.4
430218U
432218U
430318DU
430318U
432318U
102
102
108
108
108
150
152
180
177
177
6.5
8.5
16.5
10.5
14.5
2
2
3
3
3
0.6
0.6
1
1
1
73
81
127
84
100
0.42
0.42
0.83
0.35
0.35
1.61
1.61
0.82
1.96
1.96
2.39
2.39
1.22
2.91
2.91
1.57
1.57
0.80
1.91
1.91
5.66
7.35
12.5
12.9
18.2
430219XU
432219XU
430319XU
430319X
432319U
109
109
113
113
113
159
161
186
186
186
7.5
8.5
11.5
11.5
16.5
2.5
2.5
3
3
3
1
1
1
1
1
76.5
86.5
89
88.5
106
0.42
0.42
0.35
0.35
0.35
1.61
1.61
1.96
1.95
1.96
2.39
2.39
2.91
2.90
2.91
1.57
1.57
1.91
1.91
1.91
8.01
9.04
15.0
14.0
21.5
430220XU
432220XU
430320XU
430320X
432320U
114
114
118
118
118
168
171
200
200
200
8
10
12.5
12.5
17.5
2.5
2.5
3
3
3
1
1
1
1
1
81.5
92
92
93.5
113
0.42
0.42
0.35
0.35
0.35
1.61
1.61
1.96
1.95
1.96
2.39
2.39
2.91
2.90
2.91
1.57
1.57
1.91
1.91
1.91
8.11
10.7
18.4
16.5
26.5
430221XU
432221XU
430321X
119
119
123
178
180
209
9
10
12.5
2.5
2.5
3
1
1
1
86
97.5
96.5
0.42
0.42
0.35
1.61
1.61
1.95
2.39
2.39
2.90
1.57
1.57
1.91
9.73
13.1
19.6
B-197

Outward facing type
B1
C
r1
r
d 105140mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
C
oil
109,000
150,000
1,400
1,400
1,900
1,900
23,300
30,500
56,500
73,500
84,000
69,500
109,000
123,000
35,000
49,500
88,500
124,000
120,000
94,500
169,000
197,000
1,600
1,600
1,500
1,500
1,400
1,400
1,400
1,400
2,200
2,200
2,000
2,000
1,800
1,800
1,800
1,800
298
375
435
610
940
1,360
1,390
1,100
2,270
19,700
23,500
26,800
38,000
60,500
80,500
97,500
81,500
143,000
30,500
38,000
44,500
62,500
96,000
139,000
142,000
112,000
231,000
1,500
1,500
1,500
1,500
1,400
1,400
1,200
1,200
1,200
2,100
2,100
2,000
2,000
1,900
1,900
1,700
1,700
1,700
224
294
315
410
640
905
1,110
365
490
485
675
1,010
1,630
1,660
22,900
29,900
32,000
42,000
65,500
92,500
113,000
37,500
50,000
49,500
69,000
103,000
166,000
169,000
1,400
1,400
1,400
1,400
1,300
1,300
1,200
1,900
1,900
1,800
1,800
1,700
1,700
1,500
262
300
370
390
640
720
1,050
1,260
1,100
415
535
580
650
970
1,140
1,840
1,900
1,560
26,700
30,500
37,500
40,000
65,500
73,500
107,000
129,000
112,000
42,500
54,500
59,500
66,000
99,000
117,000
188,000
194,000
160,000
1,300
1,300
1,200
1,200
1,200
1,200
1,200
1,100
1,100
1,800
1,800
1,700
1,700
1,600
1,600
1,600
1,400
1,400
1
1
750
955
1,060
1,470
76,000
97,500
50
56
74
101
93
93
142
142
2.5
2.5
3
3
4
3
3
4
0.6
0.6
1
1
1
1
1
1
228
298
555
720
825
685
1,070
1,210
340
485
865
1,210
1,180
925
1,660
1,940
46
58
62
78
97
132
128
128
188
41
46
55
62
78
109
101
101
145
2.5
2.5
2.5
2.5
3
3
4
3
4
0.6
0.6
0.6
0.6
1
1
1
1
1
193
230
263
370
595
790
960
800
1,400
200
200
210
210
230
230
280
52
65
64
80
98
145
137
46
52
57
64
78.5
117.5
107.5
2.5
2.5
2.5
2.5
4
4
5
0.6
0.6
0.6
0.6
1
1
1.5
210
210
225
225
250
250
250
300
300
53
66
68
84
102
102
153
145
145
47
53
61
68
82.5
82.5
125.5
115.5
115.5
2.5
2.5
3
3
3
4
4
5
4
0.6
0.6
1
1
1
1
1
1.5
1.5
105
225
225
116
170
91
133
110
180
180
200
200
240
240
240
240
56
70
92
121
118
118
181
181
120
180
180
200
200
215
215
260
260
260
rpm
grease
4
3
B1
140
kgf
Cr
rs min
r1s min
130
kN
1
Limiting speeds
static
Cor
Cr

B-198
Cor
Sb
r1a
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Bearing numbers
Load
center
mm
mm
da
Db
Sb
ras
r1as
min
min
min
max
max
Constant
Axial load factors
Mass
kg
Y1
Y2
Yo
(approx.)
430321XU
432321
123
119
209
208
12.5
18.5
3
2.5
1
1
96.5
117.5
0.35
0.35
1.96
1.96
2.91
2.90
1.91
1.91
21.0
30.2
413122
423122
430222XU
432222XU
430322U
430322
432322
432322U
122
122
124
124
128
128
128
128
169
166
188
190
222
222
222
222
3
7
9
10
12.5
12.5
19.5
19.5
2
2
2.5
2.5
3
3
3
3
0.6
0.6
1
1
1
1
1
1
66.5
66.5
90
102
100
97.5
124
127
0.40
0.33
0.42
0.42
0.35
0.35
0.35
0.35
1.68
2.03
1.61
1.61
1.96
1.95
1.95
1.96
2.50
3.02
2.39
2.39
2.91
2.90
2.90
2.91
1.64
1.98
1.57
1.57
1.91
1.91
1.91
1.91
5.20
6.38
11.4
15.5
24.5
22.1
35.6
38.2
413024
423024
413124
423124
430224XU
432224XU
430324XU
430324X
432324U
132
132
132
132
134
134
138
138
138
171
170
184
188
203
204
239
239
239
2.5
6
3.5
8
9.5
11.5
13.5
13.5
21.5
2
2
2
2
2.5
2.5
3
3
3
0.6
0.6
0.6
0.6
1
1
1
1
1
59
66
76.5
76.5
98
112
107
106
130
0.37
0.37
0.43
0.37
0.44
0.44
0.35
0.35
0.35
1.80
1.80
1.57
1.80
1.55
1.55
1.96
1.95
1.96
2.69
2.69
2.34
2.69
2.31
2.31
2.91
2.90
2.91
1.76
1.76
1.53
1.76
1.52
1.52
1.91
1.91
1.91
3.85
4.41
7.24
8.96
13.6
18.9
30.5
29.4
47.0
413026
423026
413126
423126
430226XU
432226XU
430326XU
142
142
142
142
148
148
152
186
189
196
198
218
219
255
3
6.5
3.5
8
9.5
13.5
14.5
2
2
2
2
3
3
4
0.6
0.6
0.6
0.6
1
1
1.5
66
71.5
69
79.5
102
124
116
0.37
0.37
0.33
0.37
0.44
0.44
0.35
1.80
1.80
2.03
1.80
1.55
1.55
1.96
2.69
2.69
3.02
2.69
2.31
2.31
2.91
1.76
1.76
1.98
1.76
1.52
1.52
1.91
5.55
6.62
7.83
9.77
15.9
24.1
37.9
413028
423028
413128
423128
430228X
430228XU
432228XU
430328XU
430328X
152
152
154
154
158
158
158
162
162
199
197
210
209
237
237
238
273
272
3
6.5
3.5
8
9.5
9.5
13.5
14.5
14.5
2
2
2.5
2.5
3
3
3
4
4
0.6
0.6
1
1
1
1
1
1.5
1.5
68.5
75
73.5
88
106
107
131
123
123
0.37
0.37
0.33
0.37
0.43
0.44
0.44
0.35
0.35
1.80
1.84
2.03
1.80
1.57
1.55
1.55
1.96
1.95
2.69
2.74
3.02
2.69
2.34
2.31
2.31
2.91
2.90
1.76
1.80
1.98
1.76
1.53
1.52
1.52
1.91
1.91
5.88
7.11
9.18
11.8
18.0
19.9
30.1
46.6
44.4
B-199

Outward facing type
B1
C
r1
r
d 140190mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kgf
rpm
Cr
Cor
Cr
Cor
grease
oil
3
3
3
3
4
4
5
4
1
1
1
1
1
1
1.5
1.5
274
355
485
600
770
1,200
1,410
1,170
430
630
805
1,040
1,210
2,140
2,140
1,750
27,900
36,000
49,500
61,500
78,500
122,000
144,000
119,000
44,000
64,500
82,000
106,000
123,000
218,000
218,000
178,000
1,200
1,200
1,200
1,200
1,100
1,100
990
990
1,600
1,600
1,500
1,500
1,500
1,500
1,300
1,300
53
60
76
86
91
144
126
126
3
3
3
3
4
4
5
4
1
1
1
1
1
1
1.5
1.5
330
430
595
675
900
1,530
1,570
1,290
535
765
965
1,180
1,440
2,840
2,390
1,950
34,000
44,000
60,500
69,000
92,000
156,000
160,000
132,000
54,500
78,000
98,000
120,000
147,000
290,000
244,000
199,000
1,100
1,100
1,100
1,100
1,000
1,000
920
920
1,500
1,500
1,400
1,400
1,400
1,400
1,200
1,200
67
84
88
110
125
192
60
67
78
88
97
152
3
3
3
3
5
5
1
1
1
1
1.5
1.5
365
490
550
725
1,050
1,710
620
865
900
1,270
1,690
3,200
37,000
50,000
56,000
74,000
107,000
174,000
63,500
88,000
92,000
130,000
173,000
325,000
1,100
1,100
1,000
1,000
950
950
1,400
1,400
1,300
1,300
1,300
1,300
280
280
300
300
320
320
74
93
96
120
127
192
66
74
85
96
99
152
3
3
4
4
5
5
1
1
1.5
1.5
1.5
1.5
425
580
705
885
1,080
1,760
735
1,050
1,190
1,530
1,780
3,350
43,000
59,500
72,000
90,500
110,000
180,000
75,000
107,000
121,000
156,000
182,000
345,000
1,000
1,000
940
940
890
890
1,300
1,300
1,300
1,300
1,200
1,200
290
290
320
320
340
340
340
75
94
104
130
133
204
204
67
75
92
104
105
160
160
3
3
4
4
5
5
4
1
1
1.5
1.5
1.5
1.5
1.5
430
615
780
985
1,230
1,970
1,710
740
1,110
1,280
1,710
2,010
3,700
3,350
44,000
63,000
79,500
100,000
125,000
201,000
175,000
75,500
113,000
131,000
174,000
205,000
380,000
340,000
940
940
890
890
840
840
840
1,300
1,300
1,200
1,200
1,100
1,100
1,100
B1
150
225
225
250
250
270
270
320
320
56
70
80
100
109
164
154
154
50
56
71
80
87
130
120
120
160
240
240
270
270
290
290
340
340
60
75
86
108
115
178
160
160
170
260
260
280
280
310
310
190
r1s min
180
kN
1
Limiting speeds
static
rs min

B-200
Sb
r1a
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Bearing numbers
Load
center
mm
mm
Constant
Axial load factors
Mass
kg
da
Db
Sb
ras
r1as
min
min
min
max
max
Y1
Y2
Yo
(approx.)
413030
423030
413130
423130
430230U
432230XU
430330U
430330
164
164
164
164
168
168
172
172
213
212
231
234
255
254
292
292
3
7
4.5
10
11
17
17
17
2.5
2.5
2.5
2.5
3
3
4
4
1
1
1
1
1
1
1.5
1.5
73.5
79.5
82.5
96.5
114
139
132
135
0.37
0.37
0.33
0.37
0.44
0.44
0.35
0.37
1.80
1.80
2.03
1.80
1.55
1.55
1.96
1.80
2.69
2.69
3.02
2.69
2.31
2.31
2.91
2.69
1.76
1.76
1.98
1.76
1.52
1.52
1.91
1.76
6.66
8.76
14.3
18.0
24.4
37.3
55.4
52.8
413032
423032
413132E1
423132E1
430232U
432232U
430332XU
430332X
174
174
174
174
178
178
182
182
227
227
254
250
272
275
310
311
3.5
7.5
5
11
12
17
17
17
2.5
2.5
2.5
2.5
3
3
4
4
1
1
1
1
1
1
1.5
1.5
79
85.5
98.5
106
122
150
138
141
0.37
0.37
0.40
0.37
0.44
0.44
0.35
0.37
1.80
1.80
1.68
1.80
1.55
1.55
1.96
1.80
2.69
2.69
2.50
2.69
2.31
2.31
2.91
2.69
1.76
1.76
1.64
1.76
1.52
1.52
1.91
1.76
8.29
10.7
18.2
22.8
31.9
46.9
65.5
62.4
413034
423034
413134E1
423134E1
430234U
432234XU
184
184
184
184
192
192
242
244
260
260
288
293
3.5
8.5
5
11
14
20
2.5
2.5
2.5
2.5
4
4
1
1
1
1
1.5
1.5
86.5
93.5
104
109
132
160
0.37
0.37
0.40
0.37
0.44
0.44
1.80
1.80
1.68
1.80
1.55
1.55
2.69
2.69
2.50
2.69
2.31
2.31
1.76
1.76
1.64
1.76
1.52
1.52
11.6
14.3
19.5
24.7
38.0
58.2
413036E1
423036E1
413136E1
423136E1
430236U
432236U
194
194
198
198
202
202
260
262
280
279
297
305
4
9.5
5.5
12
14
20
2.5
2.5
3
3
4
4
1
1
1.5
1.5
1.5
1.5
94
102
111
119
139
165
0.37
0.37
0.40
0.37
0.45
0.45
1.80
1.80
1.68
1.80
1.50
1.50
2.69
2.69
2.50
2.69
2.23
2.23
1.76
1.76
1.64
1.76
1.47
1.47
15.9
19.0
24.6
31.4
39.4
60.6
413038E1
423038E1
413138
423138
430238U
432238U
432238
204
204
208
208
212
212
212
271
272
300
299
316
323
323
4
9.5
6
13
14
22
22
2.5
2.5
3
3
4
4
4
1
1
1.5
1.5
1.5
1.5
1.5
96
104
119
126
141
174
185
0.37
0.37
0.40
0.37
0.44
0.44
0.49
1.80
1.80
1.68
1.80
1.55
1.55
1.38
2.69
2.69
2.50
2.69
2.31
2.31
2.06
1.76
1.76
1.64
1.76
1.52
1.52
1.35
16.2
19.6
30.8
38.6
45.4
73.3
69.8
B-201

Outward facing type
B1
C
r1
r
d 190340mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kgf
rpm
grease
oil
Cr
Cor
Cr
Cor
3
3
4
4
5
5
4
1
1
1.5
1.5
1.5
1.5
1.5
530
720
965
1,090
1,350
2,260
1,980
940
1,320
1,660
1,910
2,210
4,250
3,950
54,000
73,000
98,500
111,000
137,000
230,000
201,000
96,000
135,000
169,000
195,000
226,000
435,000
400,000
900
900
840
840
800
800
800
1,200
1,200
1,100
1,100
1,100
1,100
1,100
80
90
107
120
4
4
5
5
1.5
1.5
1.5
1.5
595
880
1,110
1,220
1,060
1,650
1,920
2,260
61,000
89,500
113,000
125,000
108,000
168,000
196,000
230,000
810
810
760
760
1,100
1,100
1,000
1,000
92
115
128
160
82
92
114
128
4
4
5
5
1.5
1.5
1.5
1.5
655
910
1,230
1,400
1,160
1,770
2,130
2,600
66,500
92,500
126,000
142,000
118,000
181,000
217,000
265,000
730
730
690
690
980
980
920
920
260
400
400
440
440
104
130
144
180
92
104
128
144
5
5
5
5
1.5
1.5
1.5
1.5
840
1,150
1,500
1,940
1,540
2,190
2,630
3,750
85,500
117,000
152,000
198,000
157,000
223,000
268,000
380,000
670
670
630
630
900
900
840
840
280
420
420
460
460
106
133
146
183
94
106
130
146
5
5
6
6
1.5
1.5
2
2
890
1,200
1,640
1,940
1,630
2,340
2,900
3,650
91,000
123,000
167,000
198,000
166,000
238,000
296,000
375,000
620
620
580
580
820
820
770
770
300
460
460
500
500
118
148
160
200
105
118
142
160
5
5
6
6
1.5
1.5
2
2
1,070
1,610
2,010
2,100
1,990
3,150
3,600
4,050
109,000
165,000
205,000
214,000
203,000
320,000
370,000
415,000
570
570
530
530
760
760
710
710
320
480
480
540
540
121
151
176
220
108
121
157
176
5
5
6
6
1.5
1.5
2
2
1,190
1,580
2,240
2,500
2,250
3,100
4,100
4,900
121,000
162,000
228,000
255,000
229,000
315,000
415,000
500,000
530
530
500
500
710
710
660
660
520
133
118
1,480
2,870
150,000
293,000
500
660
B1
310
310
340
340
360
360
360
82
103
112
140
142
218
218
73
82
100
112
110
174
174
220
340
340
370
370
90
113
120
150
240
360
360
400
400
200
340
rs min
r1s min
kN
1
Limiting speeds
static

B-202
Sb
r1a
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Bearing numbers
Load
center
mm
mm
da
Db
Sb
ras
r1as
min
min
min
max
max
Constant
Axial load factors
Mass
kg
Y1
Y2
Yo
(approx.)
413040E1
423040E1
413140
423140
430240U
432240U
432240
214
214
218
218
222
222
222
288
291
320
316
336
340
340
4.5
10.5
6
14
16
22
22
2.5
2.5
3
3
4
4
4
1
1
1.5
1.5
1.5
1.5
1.5
101
112
125
134
154
180
193
0.37
0.37
0.40
0.37
0.44
0.41
0.49
1.80
1.80
1.68
1.80
1.55
1.66
1.38
2.69
2.69
2.50
2.69
2.31
2.47
2.06
1.76
1.76
1.64
1.76
1.52
1.62
1.35
20.6
25.7
38.6
47.5
62.8
95.2
90.7
413044E1
423044E1
413144
423144
238
238
242
242
318
319
346
341
5
11.5
6.5
15
3
3
4
4
1.5
1.5
1.5
1.5
112
125
135
154
0.37
0.37
0.40
0.40
1.80
1.80
1.68
1.68
2.69
2.69
2.50
2.50
1.76
1.76
1.64
1.64
26.7
33.3
47.8
59.6
413048E1
423048E1
413148
423148
258
258
262
262
339
340.5
375
373
5
11.5
7
16
3
3
4
4
1.5
1.5
1.5
1.5
117
131
144
164
0.37
0.37
0.40
0.40
1.80
1.80
1.68
1.68
2.69
2.69
2.50
2.50
1.76
1.76
1.64
1.64
30.2
36.3
58.9
71.7
413052
423052
413152
423152
282
282
282
282
372
374
412
413
6
13
8
18
4
4
4
4
1.5
1.5
1.5
1.5
131
143
161
176
0.37
0.37
0.40
0.40
1.80
1.80
1.68
1.68
2.69
2.69
2.50
2.50
1.76
1.76
1.64
1.64
41.5
53.0
82.2
101
413056
423056
413156
423156
302
302
308
308
394
397
435
433
6
13.5
8
18.5
4
4
5
5
1.5
1.5
2
2
136
148
168
177
0.37
0.37
0.40
0.40
1.80
1.80
1.68
1.68
2.69
2.69
2.50
2.50
1.76
1.76
1.64
1.64
47.2
57.3
87.4
109
413060
423060
413160
423160
322
322
328
328
428
434
471
464
6.5
15
9
20
4
4
5
5
1.5
1.5
2
2
151
163
182
202
0.37
0.37
0.40
0.40
1.80
1.80
1.68
1.68
2.69
2.69
2.50
2.50
1.76
1.76
1.64
1.64
65.6
80.2
115
144
413064
423064
413164
423164
342
342
348
348
449
455
505
502
6.5
15
9.5
22
4
4
5
5
1.5
1.5
2
2
157
170
197
217
0.37
0.37
0.40
0.40
1.80
1.80
1.68
1.68
2.69
2.69
2.50
2.50
1.76
1.76
1.64
1.64
70.9
85.4
150
188
413068
368
488
7.5
170
0.37
1.8
2.69
1.76
89.2
B-203

Outward facing type
B1
C
r1
r
d 340480mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
1
Limiting speeds
static
kgf
rpm
r1s min
Cr
Cor
Cr
Cor
grease
oil
6
6
6
2
2
2
1,890
2,690
3,350
3,750
4,900
6,500
193,000
274,000
345,000
380,000
500,000
660,000
500
460
460
660
620
620
120
134
171
192
6
6
6
6
2
2
2
2
1,470
2,050
2,720
3,200
2,810
4,200
5,050
6,500
150,000
209,000
277,000
325,000
287,000
430,000
515,000
660,000
460
460
430
430
620
620
580
580
135
171
194
243
122
135
173
194
6
6
6
6
2
2
2
2
1,690
2,080
2,840
3,350
3,350
4,350
5,250
6,700
172,000
213,000
289,000
340,000
340,000
445,000
535,000
685,000
440
440
410
410
580
580
540
540
400
600
600
650
650
148
185
200
250
132
148
178
200
6
6
6
6
2
2
3
3
1,860
2,530
3,000
3,750
3,700
5,450
5,800
7,850
190,000
258,000
305,000
385,000
375,000
555,000
590,000
800,000
410
410
380
380
550
550
510
510
420
620
620
700
700
150
188
224
280
134
150
200
224
6
6
6
6
2
2
3
3
2,110
2,650
3,700
4,800
4,250
5,900
7,200
9,700
215,000
270,000
375,000
490,000
435,000
600,000
735,000
990,000
390
390
360
360
520
520
480
480
440
650
650
720
720
157
196
226
283
140
157
201
226
6
6
6
6
3
3
3
3
2,470
2,600
4,000
5,000
5,150
5,450
7,800
10,300
252,000
266,000
410,000
510,000
525,000
560,000
795,000
1,050,000
370
370
340
340
490
490
460
460
460
680
680
760
760
163
204
240
300
145
163
214
240
6
6
7.5
7.5
3
3
4
4
2,600
3,050
4,550
4,900
5,350
6,600
9,150
10,300
265,000
310,000
465,000
500,000
550,000
670,000
930,000
1,050,000
350
350
320
320
470
470
430
430
480
700
700
790
790
165
206
248
310
147
165
221
248
6
6
7.5
7.5
3
3
4
4
2,490
3,050
4,800
5,300
5,000
6,700
9,600
11,100
254,000
310,000
490,000
540,000
510,000
685,000
975,000
1,130,000
330
330
310
310
450
450
410
410
B1
340
520
580
580
165
190
238
133
169
190
360
540
540
600
600
134
169
192
240
380
560
560
620
620
rs min
B-204
Sb
r1a
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Bearing numbers
Load
center
mm
mm
da
Db
Sb
ras
r1as
min
min
min
max
max
Constant
Axial load factors
Mass
kg
Y1
Y2
Yo
(approx.)
423068
413168
423168
368
368
368
489
544
542
16
10.5
24
5
5
5
2
2
2
184
213
237
0.37
0.40
0.40
1.80
1.68
1.68
2.69
2.50
2.50
1.76
1.64
1.64
113
188
235
413072
423072
413172
423172
388
388
388
388
507
509
561
560
7
17.5
10.5
24
5
5
5
5
2
2
2
2
176
192
219
240
0.37
0.37
0.40
0.40
1.80
1.80
1.68
1.68
2.69
2.69
2.50
2.50
1.76
1.76
1.64
1.64
92.7
120
199
248
413076
423076
413176
423176
408
408
408
408
528
529
583
578
6.5
18
10.5
24.5
5
5
5
5
2
2
2
2
183
196
225
249
0.37
0.37
0.40
0.40
1.80
1.80
1.68
1.68
2.69
2.69
2.50
2.50
1.76
1.76
1.64
1.64
95.9
126
210
262
413080
423080
413180
423180
428
428
428
428
564
564
610
610
8
18.5
11
25
5
5
5
5
2
2
2.5
2.5
194
210
232
256
0.37
0.37
0.40
0.40
1.80
1.80
1.68
1.68
2.69
2.69
2.50
2.50
1.76
1.76
1.64
1.64
105
163
236
294
413084
423084
413184
423184
448
448
448
448
586
583
655
659
8
19
12
28
5
5
5
5
2
2
2.5
2.5
200
220
258
287
0.37
0.37
0.40
0.40
1.80
1.80
1.68
1.68
2.69
2.69
2.50
2.50
1.76
1.76
1.64
1.64
135
172
317
394
413088
423088
413188
423188
468
468
468
468
614
614
675
678
8.5
19.5
12.5
28.5
5
5
5
5
2.5
2.5
2.5
2.5
208
229
263
288
0.37
0.37
0.40
0.40
1.80
1.80
1.68
1.68
2.69
2.69
2.50
2.50
1.76
1.76
1.64
1.64
160
198
330
412
413092
423092
413192
423192
488
488
496
496
646
644
714
712
9
20.5
13
30
5
5
6
6
2.5
2.5
3
3
217
239
276
305
0.37
0.37
0.40
0.40
1.80
1.80
1.68
1.68
2.69
2.69
2.50
2.50
1.76
1.76
1.64
1.64
179
225
395
493
413096
423096
413196
423196
508
508
516
516
665
664
743
738
9
20.5
13.5
31
5
5
6
6
2.5
2.5
3
3
223
246
281
329
0.37
0.37
0.40
0.40
1.80
1.80
1.68
1.68
2.69
2.69
2.50
2.50
1.76
1.76
1.64
1.64
189
236
442
548
B-205

Outward facing type
B1
C
r1
r
d 500mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
B1
500
720
720
830
830
167
209
264
330
kN
1
rs min
149
167
235
264
6
6
7.5
7.5
r1s min
Cr
3
3
4
4
2,610
3,050
5,200
6,400
kgf
Cor
B-206
Limiting speeds
static
5,400
6,900
10,500
14,000
Cr
266,000
315,000
530,000
650,000
rpm
Cor
550,000
700,000
1,070,000
1,420,000
grease
oil
320
320
290
290
420
420
390
390
Sb
r1a
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Db
da
Bearing numbers
4130/500
4230/500
4131/500
5E-4231/500G2
Load
center
mm
mm
da
Db
Sb
ras
r1as
min
min
min
max
max
686
683
780
773
9
21
14.5
33
5
5
6
6
2.5
2.5
3
3
528
528
536
536
B-207
230
250
296
331
Constant
Axial load factors
Mass
kg
Y1
Y2
0.37
0.37
0.40
0.40
1.80
1.80
1.68
1.68
2.69
2.69
2.50
2.50
Yo
(approx.)
1.76
1.76
1.64
1.64
202
247
528
678

Inward facing type
C1
r
r1
B
D
d 110280mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
1
Limiting speeds
static
kgf
rpm
Cr
Cor
Cr
Cor
grease
oil
298
485
30,500
49,500
1,600
2,200
2.5
2.5
2
2
230
370
375
610
23,500
38,000
38,000
62,500
1,500
1,500
2,100
2,000
52
64
2.5
2.5
2
2
294
410
490
675
29,900
42,000
50,000
69,000
1,400
1,400
1,900
1,800
53
68
53
68
2.5
3
2
2.5
300
390
535
650
30,500
40,000
54,500
66,000
1,300
1,200
1,800
1,700
225
250
56
80
56
80
3
3
2.5
2.5
355
600
630
1,040
36,000
61,500
64,500
106,000
1,200
1,200
1,600
1,500
160
240
270
60
86
60
86
3
3
2.5
2.5
430
675
765
1,180
44,000
69,000
78,000
120,000
1,100
1,100
1,500
1,400
170
260
280
67
88
67
88
3
3
2.5
2.5
490
725
865
1,270
50,000
74,000
88,000
130,000
1,100
1,000
1,400
1,300
180
280
300
74
96
74
96
3
4
2.5
3
580
885
1,050
1,530
59,500
90,500
107,000
156,000
1,000
940
1,300
1,300
190
290
320
75
104
75
104
3
4
2.5
3
615
985
1,110
1,710
63,000
100,000
113,000
174,000
940
890
1,300
1,200
200
310
340
82
112
82
112
3
4
2.5
3
720
1,090
1,320
1,910
73,000
111,000
135,000
195,000
900
840
1,200
1,100
220
340
370
90
120
90
120
4
5
3
4
880
1,220
1,650
2,260
89,500
125,000
168,000
230,000
810
760
1,100
1,000
240
360
400
92
128
92
128
4
5
3
4
910
1,400
1,770
2,600
92,500
142,000
181,000
265,000
730
690
980
920
260
400
440
104
144
104
144
5
5
4
4
1,150
1,960
2,190
3,750
117,000
200,000
223,000
380,000
670
630
900
840
280
420
106
106
1,200
2,340
123,000
238,000
620
820
C1
r1s min
110
180
56
56
2.5
120
180
200
46
62
46
62
130
200
210
52
64
140
210
225
150
rs min
B-208
Sa
r1a
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Da
da
Bearing numbers
Load
center
mm
mm
Sa
r1as
ras
max
max
Da
min
min
max
max
323122
124
170
160
323024
323124
134
134
170
190
164
175
8
8
2
2
323026
323126
144
144
190
200
184
185
8
8
323028
323128
155
156
200
213
190
200
323030
323130
165
168
213
238
323032
323132E1
175
178
323034
323134E1
da
Axial load factors
Mass
kg
Y1
Y2
Yo
(approx.)
0.33
2.03
3.02
1.98
5.6
2
2
12
6.5
0.37
0.37
1.80
1.80
2.69
2.69
1.76
1.76
4.08
7.82
2
2
2
2
13.5
7.5
0.37
0.37
1.80
1.80
2.69
2.69
1.76
1.76
5.92
8.58
8
10
2
2.5
2
2
10
8
0.37
0.37
1.84
1.80
2.74
2.69
1.80
1.76
6.4
10.7
205
220
10
10
2.5
2.5
2
2
15.5
6.5
0.37
0.37
1.80
1.80
2.69
2.69
1.76
1.76
7.76
15.7
228
258
215
240
10
10
2.5
2.5
2
2
17.5
8
0.37
0.37
1.80
1.80
2.69
2.69
1.76
1.76
9.46
20
185
188
248
268
235
250
10
10
2.5
2.5
2
2
18
8.5
0.37
0.37
1.80
1.80
2.69
2.69
1.76
1.76
12.8
21.5
323036E1
323136E1
198
200
268
286
250
265
10
12
2.5
3
2
2.5
17
8
0.37
0.37
1.80
1.80
2.69
2.69
1.76
1.76
16.5
27.2
323038E1
323138
208
212
278
306
260
285
12
12
2.5
3
2
2.5
17.5
8.5
0.37
0.37
1.80
1.80
2.69
2.69
1.76
1.76
17.9
34
323040E1
323140
218
222
298
326
280
300
12
12
2.5
3
2
2.5
19
8.5
0.37
0.37
1.80
1.80
2.69
2.69
1.76
1.76
21.7
41.7
323044E1
323144
242
248
326
352
310
325
12
14
3
4
2.5
3
21.5
14
0.37
0.40
1.80
1.68
2.69
2.50
1.76
1.64
29.8
52.2
323048E1
323148
269
268
346
382
321.5
355
14
14
3
4
2.5
3
25.5
17
0.37
0.40
1.80
1.68
2.69
2.50
1.76
1.64
32.6
64.6
323052
323152
285
290
382
422
365
385
14
16
4
4
3
3
25
16.5
0.37
0.40
1.80
1.68
2.69
2.50
1.76
1.64
47.3
90
323056
305
402
385
16
29.5
0.37
1.80
2.69
1.76
51.2
B-209
Constant

Inward facing type
C1
r
r1
B
D
d 280500mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
kgf
rpm
grease
oil
Cor
Cr
Cor
1,940
3,650
198,000
375,000
580
770
5
6
4
5
1,610
2,100
3,150
4,050
165,000
214,000
320,000
415,000
570
530
760
710
121
176
5
6
4
5
1,580
2,500
3,100
4,900
162,000
255,000
315,000
500,000
530
500
710
660
133
190
133
190
6
6
5
5
1,890
3,350
3,750
6,500
193,000
345,000
380,000
660,000
500
460
660
620
540
600
134
192
134
192
6
6
5
5
2,050
3,200
4,200
6,500
209,000
325,000
430,000
660,000
460
430
620
580
380
560
620
135
194
135
194
6
6
5
5
2,080
3,350
4,350
6,700
213,000
340,000
445,000
685,000
440
410
580
540
400
600
650
148
200
148
200
6
6
5
6
2,530
3,750
5,450
7,850
258,000
385,000
555,000
800,000
410
380
550
510
420
620
700
150
224
150
224
6
6
5
6
2,650
4,800
5,900
9,700
270,000
490,000
600,000
990,000
390
360
520
480
440
650
720
157
226
157
226
6
6
6
6
2,600
5,000
5,450
10,300
266,000
510,000
560,000
1,050,000
370
340
490
460
460
680
760
163
240
163
240
6
7.5
6
7.5
3,050
4,900
6,600
10,300
310,000
500,000
670,000
1,050,000
350
320
470
430
480
700
790
165
248
165
248
6
7.5
6
7.5
3,050
5,300
6,700
11,100
310,000
540,000
685,000
1,130,000
330
310
450
410
500
720
830
167
264
167
264
6
7.5
6
7.5
3,050
6,400
6,900
14,000
315,000
650,000
700,000
1,420,000
320
290
420
390
280
460
146
146
300
460
500
118
160
118
160
320
480
540
121
176
340
520
580
360
rs min
Cr
C1
r1s min
Limiting speeds
static
B-210
Sa
r1a
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYoFa
ra
Da
da
Bearing numbers
Load
center
mm
mm
Da
Sa
r1as
ras
min
max
max
16
425
440
16
16
4
5
462
518
440
480
16
18
370
380
498
558
480
515
323072
323172
395
400
518
578
323076
323176
415
420
323080
323180
da
Axial load factors
Mass
kg
Y1
Y2
Yo
16
0.40
1.68
2.50
1.64
95.8
3
4
31
18
0.37
0.40
1.80
1.68
2.69
2.50
1.76
1.64
70.7
126
4
5
3
4
34
18.5
0.37
0.40
1.80
1.68
2.69
2.50
1.76
1.64
76.3
164
18
18
5
5
4
4
36
35.5
0.37
0.40
1.80
1.68
2.69
2.50
1.76
1.64
101
207
495
535
18
18
5
5
4
4
41
25.5
0.37
0.40
1.80
1.68
2.69
2.50
1.76
1.64
107
218
538
598
515
550
18
20
5
5
4
4
44.5
29
0.37
0.40
1.80
1.68
2.69
2.50
1.76
1.64
113
229
440
445
578
622
550
580
18
20
5
5
4
5
45
32.5
0.37
0.40
1.80
1.68
2.69
2.50
1.76
1.64
146
259
323084
323184
460
465
598
672
570
625
20
25
5
5
4
5
48.5
60
0.37
0.40
1.80
1.68
2.69
2.50
1.76
1.64
154
346
323088
323188
480
485
622
692
600
645
20
25
5
5
5
5
53.5
44
0.37
0.40
1.80
1.68
2.69
2.50
1.76
1.64
177
361
323092
323192
500
510
652
724
620
680
25
25
5
6
5
6
56.5
34.5
0.37
0.40
1.80
1.68
2.69
2.50
1.76
1.64
201
433
323096
323196
520
530
672
754
640
705
25
30
5
6
5
6
63
36
0.37
0.40
1.80
1.68
2.69
2.50
1.76
1.64
211
481
540
550
692
794
655
740
25
30
5
6
5
6
61.5
37.5
0.37
0.40
1.80
1.68
2.69
2.50
1.76
1.64
221
570
max
max
min
323156
315
438
400
323060
323160
330
335
442
478
323064
323164
350
355
323068
323168
3230/500
5E-3231/500G2
B-211
Constant
(approx.)
Four Row Tapered Roller Bearings
C2
r
r1
B2
D Da
d da
Sa
d 120187.325mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
B2
kN
C2
r1s min
rs min
Cr
static
kgf
Cor
Cr
Cor
120
170
210
124
174
124
174
2.5
2.5
2
2.5
390
855
1,020
1,710
40,000
87,500
104,000
174,000
120.650
174.625
141.288
139.703
0.8
1.5
510
1,220
52,000
124,000
127
182.562
158.750
158.750
1.5
3.3
660
1,730
67,000
177,000
130
184
134
134
2.5
480
1,190
49,000
122,000
135
180
160
160
500
1,360
51,000
138,000
136.525
190.500
161.925
161.925
1.5
3.3
695
1,900
71,000
193,000
139.700
200.025
157.165
160.340
0.8
3.3
700
1,950
71,500
199,000
140
198
144
144
2.5
575
1,460
58,500
149,000
146.050
244.475
192.088
187.325
1.5
3.3
955
1,980
97,000
202,000
150
212
155
155
2.5
660
1,700
67,500
173,000
152.400
222.250
174.625
174.625
1.5
1.5
930
2,350
94,500
239,000
160
226
265
165
173
165
173
3
2.5
2.5
2.5
775
1,100
2,030
2,270
79,000
112,000
207,000
231,000
165.100
225.425
165.100
168.275
0.8
3.3
745
2,220
76,000
226,000
170
240
280
175
181
175
181
3
2.5
2.5
2.5
835
1,150
2,200
2,420
85,500
117,000
224,000
247,000
177.800
247.650
279.400
304.800
192.088
234.950
238.227
192.088
234.947
233.365
1.5
1.5
3.3
3.3
3.3
3.3
1,000
1,420
1,580
2,760
3,400
3,100
102,000
145,000
161,000
281,000
345,000
320,000
180
254
300
185
280
185
280
3
3
2.5
3
910
2,160
2,390
4,800
93,000
220,000
244,000
490,000
187.325
269.875
211.138
211.138
1.5
3.3
1,240
3,400
127,000
345,000
B-212
Bearing numbers
Mass
mm
kg
da
Da
Sa
(approx.)
135
140
155.5
190
5
4.5
8.97
22.2
129
163
11.5
137
168
4.5
14.3
E-625926
144.5
169
11.3
E-CRO-2701
143
165
13.5
T-E-48393D/48320/48320D
144
177
14.8
T-E-48680D/48620/48620D
150
185
17.3
156
183
14
163
225
6.5
36.8
167.5
195
5.5
16.9
165
207
24.7
177.5
184
208.5
247
5.5
4.5
20.2
33.6
175
209
20.7
187.5
192
220
255
5.5
5
24.4
44
190
195
198
229
251
279
5
5
7
29.4
55.3
69.9
200.5
201
233.5
274
5.5
5
28.9
69.4
199.9
250
41.8
E-625924
E-CRO-2418
E-M224749D/M224710/M224710D
T-E-48290D/48220/48220D
E-625928
E-81576D/81962/81963D
E-625930
T-E-M231649D/M231610/M231610D
E-625932
E-CRO-3209
E-46791D/46720/46721D
E-625934
E-CRO-3409
E-67791D/67720/67721D
E-82681D/82620/82620D
E-EE280700D/281200/281201D
E-625936
E-CRO-3617
E-M238849D/M238810/M238810D
Note: 1. Bearing numbers marked "" designate inch system bearings.
B-213
C2
r
r1
B2
D Da
d da
Sa
d 190260mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
r1s min
kgf
Cor
Cr
Cor
2.5
2.5
3.3
1,060
1,080
1,570
2,850
2,940
4,150
108,000
111,000
160,000
291,000
300,000
425,000
1.5
3.3
1,040
2,990
106,000
305,000
206
160
200
3
2.5
3
2.5
2.5
3
1,200
925
1,360
3,300
2,210
2,980
122,000
94,500
138,000
335,000
226,000
305,000
215.900
209.550
3.3
3.3
1,270
2,820
129,000
288,000
288.925
177.800
177.800
0.8
3.3
1,090
3,100
111,000
315,000
220
310
226
226
1,380
3,800
141,000
385,000
220.662
314.325
239.712
239.712
1.5
3.3
1,840
4,900
187,000
500,000
228.600
425.450
349.250
361.950
3.5
6.4
3,450
8,250
355,000
845,000
234.950
327.025
196.850
196.850
1.5
3.3
1,370
3,700
140,000
380,000
240
338
248
248
1,870
4,950
191,000
505,000
241.478
350.838
228.600
228.600
1.5
3.3
1,770
4,550
180,000
465,000
244.475
327.025
381.000
193.675
304.800
193.675
304.800
1.5
3.3
3.3
4.8
1,430
2,220
4,100
5,750
146,000
227,000
415,000
590,000
250
365
370
270
220
270
220
1.5
4
3
4
2,150
2,050
6,150
5,750
219,000
209,000
630,000
590,000
254
358.775
368.300
444.500
269.875
204.622
279.400
269.875
204.470
279.400
3.3
1.5
3.3
3.3
3.3
6.4
2,390
1,350
2,890
6,550
3,250
5,900
244,000
138,000
294,000
670,000
330,000
600,000
260
368
400
268
255
268
255
5
4
4
7.5
1,990
2,210
5,700
5,300
203,000
225,000
580,000
540,000
B2
190
268
270
292.100
196
190
225.425
196
190
225.425
3
2.5
1.5
190.500
266.700
187.325
188.912
200
282
290
310
206
160
200
203.200
317.500
215.900
B-214
rs min
Cr
C2
static
Bearing numbers
Mass
mm
kg
Sa
(approx.)
245.5
250
271
6
6
5
34.7
34.7
59.6
204
246
33.6
219.5
221
222
258
271
284
6
5
6
40.5
35.1
48.4
E-EE132082D/132125/132126D
224
294
9.5
62.5
E-LM742749D/LM742714/LM742714D
227
267
34.3
242
284.5
53.5
T-E-M244249D/M244210/M244210D
235
293
60.2
E-EE700090D/700167/700168D
263
381
250
305
53.6
260.5
312
70
E-EE127097D/127137/127137D
262
325
6.5
76.4
E-LM247748D/LM247710/LM247710DA
E-EE126096D/126150/126151D
257
262
310
343
5
6.5
46.1
132
275
276
339
344
5
6
82.1
87
272.5
269
289
335
340
406
5
6
8
85.6
71.8
185
287
290
338.5
359
6
8
90.3
106
E-625938
E-CRO-3812
E-M241538D/M241510/M241510D
T-E-67885D/67820/67820D
E-625940
E-CRO-4013
E-CRO-4014
E-625944
T-E-8576D/8520/8520D
E-625948A
E-CRO-5004
E-CRO-5001
T-E-M249748D/M249710/M249710D
E-EE171000D/171450/171451D
E-EE822101D/822175/822176D
E-625952
E-CRO-5215
B-215
da
Da
209
205
222
232
C2
r
r1
B2
D Da
d da
Sa
d 260.350304.800mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
r1s min
kgf
Cor
Cr
Cor
6.4
6.4
3.3
1,750
2,090
2,980
4,550
4,950
7,100
178,000
213,000
305,000
465,000
505,000
725,000
1.5
3.3
3.3
6.4
1,840
2,110
5,350
6,000
188,000
216,000
545,000
610,000
282.575
3.3
3.3
2,470
6,850
252,000
700,000
222
222
1,910
4,550
195,000
465,000
385
200
200
1,610
4,250
165,000
435,000
276.225
406.400
268.290
260.355
1.5
6.4
2,110
6,000
216,000
610,000
279.400
469.900
346.075
349.250
6.4
3.3
3,500
8,700
355,000
885,000
279.578
380.898
244.475
244.475
1.5
3.3
1,950
6,200
199,000
635,000
280
395
288
288
2,560
7,100
261,000
725,000
285.750
380.898
244.475
244.475
1.5
3.3
1,950
6,200
199,000
635,000
288.925
406.400
298.450
298.450
3.3
3.3
2,980
8,300
305,000
850,000
292.100
476.250
296.047
292.100
1.5
3.3
3,050
6,800
310,000
695,000
300
424
460
470
470
310
360
270
292
310
360
270
292
5
4
4
4
4
4
4
4
2,570
4,050
3,200
3,500
7,450
10,100
7,250
8,300
262,000
415,000
325,000
360,000
760,000
1,030,000
740,000
845,000
300.038
422.275
311.150
311.150
3.3
3.3
3,350
9,600
340,000
980,000
304.648
438.048
438.048
279.400
280.990
279.400
279.400
3.3
3.3
3.3
4.8
2,470
2,630
6,500
6,900
252,000
268,000
665,000
700,000
304.800
419.100
444.500
269.875
247.650
269.875
241.300
1.5
8
6.4
1.5
2,390
1,850
6,850
4,600
244,000
188,000
695,000
470,000
B2
260.350
365.125
400.050
422.275
228.600
255.588
314.325
228.600
253.995
317.500
3.3
1.5
6.4
266.700
355.600
393.700
230.188
269.878
228.600
269.878
269.875
381.000
282.575
270
410
275
B-216
rs min
Cr
C2
static
Bearing numbers
Mass
mm
kg
da
Da
Sa
(approx.)
282
292
290
340
367
392
6.5
8
5.5
76.5
117
180
281
292
335
367
6.5
5
62
116
290
356
97.5
E-CRO-5403
305
382
91
E-CRO-5501
300
355
62.5
E-EE275109D/275160/275161D
293.6
366
122
E-EE722111D/722185/722186D
316
432
258
297
356
304.5
363.5
302
356
E-M255449D/M255410/M255410D
310
379
125
E-EE921150D/921875/921876D
321
441
208
E-625960
E-CRO-6015
E-CRO-6012
E-CRO-6013
329
330
338
336
389.5
427
438
437
7
10
7
7
138
180
152
164
322
394
143
E-EE329119D/329172/329173D
E-M757448D/M757410/M757410D
328
328
409
407
8
7
143
140
E-M257149D/M257110/M257110D
E-EE291202D/291750/291751D
322
328
392
416
5
9.5
115
127
E-EE134102D/134143/134144D
E-EE221027D/221575/221576D
E-HM252349D/HM252310/HM252310D
T-E-LM451349D/LM451310/LM451310D
E-EE275106D/275155/275156D
E-M252349D/M252310/M252310D
T-E-LM654644D/LM654610/LM654610D
E-625956
T-E-LM654648D/LM654610/LM654610D
T-E-HM256849D/HM256810/HM256810DG2

2. Bearing numbers marked "" designate bearing with hollow rollers and pin type cages.
B-217
83.2
111
77.9
C2
r
r1
B2
D Da
d da
Sa
d 304.800360mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
r1s min
kgf
Cor
Cr
Cor
6.4
3,650
9,400
370,000
960,000
3.3
3.3
2,610
7,450
267,000
760,000
279.400
3.3
4.8
2,630
6,900
268,000
700,000
269.875
327.025
269.875
327.025
1.5
3.3
3.3
3.3
2,260
2,820
7,050
8,600
231,000
287,000
715,000
880,000
460
338
338
2,940
8,650
300,000
880,000
330
470
510
340
340
340
340
2.5
6
2.5
6
3,150
3,900
10,200
9,650
320,000
395,000
1,040,000
985,000
330.200
482.600
306.388
311.150
1.5
3.3
2,810
7,900
287,000
805,000
333.375
469.900
342.900
342.900
3.3
3.3
4,000
11,000
405,000
1,130,000
340
480
350
350
3,450
10,400
350,000
1,060,000
341.312
457.098
254.000
254.000
1.5
3.3
2,370
6,900
241,000
705,000
342.900
533.400
307.985
301.625
3.3
3.3
3,150
6,900
320,000
705,000
343.052
457.098
254.000
254.000
1.5
3.3
2,370
6,900
241,000
705,000
346.075
488.950
358.775
358.775
3.3
3.3
4,350
12,700
445,000
1,300,000
347.662
469.900
292.100
292.100
3.3
3.3
3,200
9,100
325,000
925,000
355
490
316
316
1.5
3.3
3,500
10,000
355,000
1,020,000
355.600
444.500
457.200
482.600
488.950
241.300
252.412
265.112
317.500
241.300
252.412
269.875
317.500
1.5
1.5
1.5
1.5
3.3
3.3
3.3
3.3
1,760
2,470
2,790
3,500
6,200
7,850
7,650
10,000
180,000
251,000
285,000
350,000
635,000
800,000
780,000
1,020,000
360
508
600
370
540
370
540
6
5
5
5
3,700
6,700
11,200
18,100
380,000
685,000
1,140,000
1,840,000
B2
304.800
495.300
342.900
349.250
3.3
304.902
412.648
266.700
266.700
305.003
438.048
280.990
317.500
422.275
447.675
320
B-218
rs min
Cr
C2
static
Bearing numbers
Mass
mm
kg
da
Da
E-EE724121D/724195/724196D
330
450
273
E-M257248D/M257210/M257210D
325
388
107
E-M757449D/M757410/M757410D
328
407
139
E-LM258649D/LM258610/LM258610D
E-HM259049D/HM259010/HM259010D
333.3
339.6
398
418
7
5
110
170
E-625964
355
420.5
183
E-CRO-6604
E-CRO-6602
366
366
440
469
5.5
5
141
221
E-EE526131D/526190/526191D
351
448
197
E-HM261049D/HM261010/HM261010D
357
439
187
373
440
200
E-LM761648D/LM761610/LM761610D
359
432
125
E-EE971355D/972100/972103D
378
502
11
252
E-LM761649D/LM761610/LM761610D
361
432
117
371
456
227
369
443
148
378
450
170
370
372
375
374
422
434
453
459
6.5
6
3
5
89.5
106
145
173
394
400
466.5
550
7
8
236
520
E-625968
E-HM262749D/HM262710/HM262710DG2
E-M262449D/M262410/M262410D
E-CRO-7105
E-L163149D/L163110/L163110D
E-LM263149D/LM263110/LM263110D
E-LM763449D/LM763410/LM763410D
E-M263349D/M263310/M263310D
E-625972
E-CRO-7210

B-219
Sa
(approx.)
C2
r
r1
B2
D Da
d da
Sa
d 368.300447.675mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
r1s min
kgf
Cor
Cr
6.4
4,450
13,100
455,000
1,330,000
1.5
3.3
2,360
6,250
241,000
640,000
390
285
6
5
5
5
4,900
3,250
14,100
7,700
500,000
330,000
1,440,000
785,000
400.050
400.050
3.3
6.4
5,400
16,100
550,000
1,640,000
514.350
317.500
317.500
3.3
3.3
3,650
11,100
370,000
1,130,000
393.700
546.100
288.925
288.925
1.5
6.4
3,200
10,200
325,000
1,040,000
395
545
268.7
288.7
7.5
2,970
8,650
305,000
880,000
400
560
564
380
412
380
412
5
6
5
5
4,800
4,850
14,100
14,700
490,000
495,000
1,440,000
1,500,000
406.400
546.100
590.550
609.600
288.925
400.050
309.562
288.925
400.050
317.500
1.5
3.3
3.5
6.4
6.4
6.4
3,200
4,850
3,700
10,200
13,600
9,600
325,000
490,000
380,000
1,040,000
1,380,000
980,000
409.575
546.100
334.962
334.962
1.5
6.4
4,100
12,700
415,000
1,290,000
415.925
590.550
434.975
434.975
3.3
6.4
6,300
18,900
640,000
1,930,000
420
592
650
432
460
432
460
6
5
5
5
5,350
6,950
16,300
18,300
545,000
710,000
1,660,000
1,870,000
431.800
571.500
571.500
279.400
336.550
279.400
336.550
1.5
1.5
3.3
6.4
3,050
3,700
9,300
11,800
315,000
380,000
950,000
1,200,000
432.003
609.524
317.500
317.500
3.5
6.4
4,350
11,500
445,000
1,170,000
440
620
650
650
454
355
460
454
355
460
6
4
6
6
7.5
6
6,500
5,350
6,750
19,900
13,400
20,700
665,000
545,000
690,000
2,030,000
1,370,000
2,110,000
447.675
635.000
463.550
463.550
3.3
6.4
7,100
22,100
725,000
2,260,000
B2
368.300
523.875
382.588
382.588
3.3
374.650
501.650
250.825
260.350
380
536
560
390
285
384.175
546.100
385.762
B-220
rs min
Cr
C2
static
Cor
Bearing numbers
Mass
mm
kg
da
Da
Sa
(approx.)
393.7
487
280
393
472
145
410
417
495
525
8
7
277
208
411
507
6.5
328
E-LM665949D/LM665910/LM665910D
409
482
240
E-LM767745D/LM767710/LM767710D
418
510
6.5
219
E-CRO-7901
434
508
200
E-CRO-8005
E-625980
426
434
510
518.5
8
7
300
324
E-LM767749D/LM767710/LM767710D
E-EE833161D/833232/833233D
E-EE911603D/912400/912401D
427
448
441
510
549
568
6.5
6.5
1.5
201
395
332
E-M667947D/M667911/M667911DG2
431
510
5.5
226
T-E-M268749D/M268710/M268710DG2
444
549
421
457
455
545
593
7
8
374
600
453
453
537
534
8
6.5
198
232
E-EE736173D/736238/736239D
464
572
6.5
297
E-625988
E-CRO-8807
E-CRO-8806
479
484
483
572.5
607
595
478
591
E-HM265049D/HM265010/HM265010DG2
E-LM765149D/LM765110/LM765110D
E-625976
E-CRO-7612
E-HM266449D/HM266410/HM266410DG2
E-625984
E-CRO-8402
E-LM869449D/LM869410/LM869410DG2
E-LM769349D/LM769310/LM769310D
E-M270749D/M270710/M270710DAG2

B-221
8
9
11
430
400
600
509
C2
r
r1
B2
D Da
d da
Sa
d 457.200571.500mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
r1s min
kgf
Cor
Cr
3.3
6.4
3,350
4,150
10,300
11,200
360,000
425,000
1,060,000
1,140,000
6,500
19,900
665,000
2,030,000
450
6,300
20,400
645,000
2,080,000
494
390
494
390
6
6
6
6
6,250
4,700
19,600
13,400
640,000
480,000
2,000,000
1,370,000
615.950
330.200
330.200
3.3
6.4
4,000
13,400
405,000
1,370,000
488.950
660.400
365.125
361.950
6.4
4,700
15,400
480,000
1,570,000
489.026
634.873
320.675
320.675
3.3
3.3
3,650
12,000
370,000
1,220,000
500
670
690
705
730
515
480
515
440
515
480
515
440
1.5
5
6
6
5
5
6
6
6,900
6,000
8,450
7,200
24,600
19,900
27,100
20,600
700,000
610,000
860,000
735,000
2,510,000
2,020,000
2,760,000
2,100,000
501.650
711.200
520.700
520.700
3.3
6.4
8,650
27,300
885,000
2,790,000
514.350
673.100
422.275
422.275
3.3
6.4
5,950
20,500
605,000
2,090,000
519.112
736.600
536.575
536.575
3.3
6.4
9,100
28,700
925,000
2,930,000
520
735
535
535
9,100
28,700
925,000
2,930,000
536.575
761.873
558.800
558.800
3.3
6.4
10,100
30,500
1,030,000
3,100,000
558.800
736.600
736.600
322.265
409.575
322.268
409.575
3.3
3.3
6.4
6.4
4,300
6,100
13,500
20,500
435,000
625,000
1,380,000
2,090,000
570
780
810
515
590
515
590
6
6
6
6
9,200
11,000
31,000
35,500
935,000
1,120,000
3,150,000
3,600,000
571.500
812.800
593.725
593.725
3.3
6.4
11,900
36,500
1,220,000
3,750,000
B2
457.200
596.900
660.400
276.225
323.850
279.400
323.847
1.5
3.3
460
650
474
474
475
660
450
480
678
700
482.600
B-222
rs min
Cr
C2
static
Cor
Bearing numbers
Mass
mm
kg
da
Da
Sa
(approx.)
478
495
567
616
5.5
6.5
209
379
E-625992A
499
598.5
493
E-CRO-9501
506
614
10
465
E-625996
E-CRO-9602
525
517
623
645
7
8
563
436
E-LM272249D/LM272210/LM272210DG2
504
585
6.5
250
E-EE640193D/640260/640261DG2
519
624
364
E-LM772749D/LM772710/LM772710D
513
600
6.5
268
E-CRO-10008
E-CRO-10005
E-6259/500
E-CRO-10003
520
530
553
550
616
640
649.5
683
8
7
7.5
11
598
600
632
535
534
663
9.5
726
540
648
390
552
684
9.5
761
558
688
E-M276449D/M276410/M276410DG2
564
711
9.5
890
E-EE843221D/843290/843291D
E-LM377449D/LM377410/LM377410DG2
585
588
699
696
8.5
8
388
502
609
620
733
760
7.5
10
625
845
609
756
11
E-L770849D/L770810/L770810DG2
E-EE737179D/737260/737260D
E-M274149D/M274110/M274110DG2
E-LM274449D/LM274410/LM274410D
E-M275349D/M275310/M275310DG2
E-CRO-10402
E-CRO-11402
E-CRO-11403
E-M278749D/M278710/M278710DG2

B-223
11
750
1,080
C2
r
r1
B2
D Da
d da
Sa
d 584.200825.500mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
C2
r1s min
Cr
6.4
6,550
22,300
670,000
2,280,000
3.3
6.4
7,350
25,700
750,000
2,620,000
615.950
3.3
6.4
12,600
40,500
1,290,000
4,100,000
361.950
361.950
3.3
6.4
6,450
20,300
655,000
2,070,000
676.275
676.275
3.3
6.4
15,300
48,000
1,560,000
4,900,000
642
642
7.5
7.5
15,400
43,500
1,570,000
4,450,000
584.200
762.000
396.875
401.638
3.3
585.788
771.525
479.425
479.425
595.312
844.550
615.950
609.600
787.400
657.225
933.450
1,070
kgf
Cor
B2
rs min
Cr
660
static
Cor
660.400
812.800
365.125
365.125
3.3
6.4
6,200
23,200
630,000
2,360,000
670
960
700
700
7.5
7.5
16,700
51,500
1,700,000
5,300,000
679.450
901.700
552.450
552.450
3.3
6.4
11,200
38,000
1,140,000
3,900,000
680
870
460
460
7,500
27,400
765,000
2,790,000
682.625
965.200
701.675
701.675
3.3
6.4
16,100
50,500
1,640,000
5,150,000
685.800
876.300
352.425
355.600
3.3
6.4
6,050
21,800
615,000
2,220,000
710
900
410
410
2.5
7,650
26,900
780,000
2,740,000
711.200
914.400
317.500
317.500
3.3
6.4
5,350
17,900
545,000
1,820,000
730
1,070
642
642
7.5
7.5
15,400
46,500
1,570,000
4,750,000
730.250
1,035.050
755.650
755.650
3.3
6.4
18,300
60,000
1,870,000
6,100,000
749.300
990.600
605.000
605.000
3.3
6.4
12,600
45,500
1,290,000
4,650,000
762.000
1,079.500
787.400
787.400
4.8
12.7
19,200
65,000
1,960,000
6,600,000
800
1,120
820
820
7.5
21,000
72,500
2,140,000
7,400,000
825.500
1,168.400
844.550
844.550
4.8
12.7
22,300
76,500
2,270,000
7,800,000
B-224
Bearing numbers
Mass
mm
kg
da
Da
E-LM778549D/LM778510/LM778510DG2
615
717
511
E-LM278849D/LM278810/LM278810D
615
726
10
750
E-M280049D/M280010/M280010DG2
633
786
11
1,160
E-EE649241D/649310/649311DG2
636
747
E-M281649D/M281610/M281610DG2
699
870
11
1,630
760
991
1,950
682.8
777
448
719
901
1,600
714
852
11
1,040
713
824
582
E-M282249D/M282210/M282210DG2
723
900
13
1,770
E-EE655271D/655345/655346DG2
717
831
539
745
850
10
620
744
873
780
1,020
1,900
E-M283449D/M283410/M283410D
774
966
13
2,210
E-LM283649D/LM283610/LM283610DG2
786
936
10.5
1,310
E-M284249D/M284210/M284210DG2
810
1,005
13
2,480
858
1,052
10
3,960
879
1,085
13
3,010
E-CRO-13202
E-L281149D/L281110/L281110DG2
E-CRO-13401
E-LM281849D/LM281810/LM281810DG2
E-CRO-13602
E-CRO-14208
E-EE755281D/755360/755361DG2
E-CRO-14601
E-CRO-16001
E-M285848D/M285810/M285810DG2

B-225
Sa
9.5
9.5
(approx.)
458
527
C2
r
r1
B2
D Da
d da
Sa
d 8401 200.150mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
B2
kN
C2
r1s min
rs min
static
kgf
Cr
Cor
Cr
Cor
21,900
76,500
2,230,000
7,800,000
840
1,170
840
840
863.600
1,130.300
1,219.200
669.925
876.300
669.925
889.000
4.8
4.8
12.7
12.7
15,800
24,100
59,500
83,000
1,610,000
2,450,000
6,050,000
8,450,000
938.212
1,270.000
825.500
825.500
4.8
12.7
22,500
80,000
2,300,000
8,150,000
950
1,360
880
880
7.5
27,000
89,000
2,750,000
9,050,000
1,593.850
990.600
990.600
4.8
12.7
33,500
132,000
3,400,000
13,500,000
1,200.150
B-226
Bearing numbers
Mass
mm
kg
da
Da
Sa
(approx.)
897
1,099
12
3,970
E-LM286249D/LM286210/LM286210DG2
E-EE547341D/547480/547481DG2
906
918
1,065
1,135
11
6.5
1,950
3,640
E-LM287649D/LM287610/LM287610DG2
990
1,190
10
4,100
1,030
1,278
12
4,100
1,260
1,500
13
6,130
E-CRO-16803
E-CRO-19001
E-LM288949D/LM288910/LM288910DG2

B-227
1. Types, construction and characteristics
In addition to bearings with cylindrical bore diameters,

those with tapered bore diameters are also available.
Bearings with tapered bore diameters are specified by
attaching the suffix "K" to the end of the bearing's basic
number. The standard taper ratio is 1:12 for bearings with a
"K" suffix, but for bearings in series 240 and 241 the suffix
"K30" indicates the taper ratio for a bearing is 1:30. Most
tapered bore bearings incorporate the use of adapters and
withdrawal sleeves for shaft mounting.
Spherical roller bearings consist of an outer ring having a

continuous spherical raceway within which operates two
rows of barrel-shaped rollers which are in turn guided by an
inner ring with two raceways separated by a center rib.
(Refer to Diagram 1) This bearing has self-aligning
properties, and therefore is suited for use where
misalignment between the inner and outer rings occurs from
housing installation error or shaft flexure.
Spherical roller bearings have a large capacity for radial
loads, axial loads in either direction, and complex loads.
They are also suited for applications where vibration and
shock loads are encountered. When operating under axial
loads, however, it is desirable to maintain conditions so that
Fa /Fr2e in order to prevent sliding movement along the row
of rollers not receiving the axial load. (For the value of e,
refer to dimension tables.)
As shown in Table 1, in addition to standard type there are
various other types of spherical roller bearings. Among
these, Type E has a particularly high load capacity.
Allowable
misalignment
Diagram 1.
Table 1 Types of spherical roller bearings

Type
Standard type (B type)
C type
213 type
E type
Series 222, 223, and 213

with bore dia. of 50 mm or
less; series 24024 to 24038.
Series 213 with bore

dia. of 50 mm or more
Series 22211 to 22218
Construction
Bearing series Does not include C type

Rollers
Roller guide
method
Cage type
Asymmetrical
Unified inner ring
center rib
Pressed Cage;
machined cage
Symmetrical
Asymmetrical
Symmetrical
Separable guide ring

between rows on inner
raceway
Separable guide ring

between rows on outer
raceway
High precision cage

(center rib, guide ring)
Pressed Cage
Machined cage
Molded resin cage
B-229

h
Standard cage types for self-aligning bearings are shown

in Table 2. In general, pressed cages are standard for small
sized bearings, and machined cages are standard for large
sized bearings.
E type bearings use as their standard cage type a cage
molded from a newly developed glass fiber reinforced
polyamide 46 resin which has excellent heat resistance
qualities (allowable operating temperatures up to
150C), strength, as well as unsurpassed oil resistance.
Nonetheless, for certain applications with high speed
specifications, large vibration and shock load conditions, and
extremely high operating temperature ranges, this molded
polyamide 46 resin cage cannot be used as standard.
Please consult NTN Engineering concerning applications
with these sorts of operating conditions.
Table 3 Oil inlet and oil groove dimensions
Pressed cage
Nominal bearing
Oil groove Oil inlet
width
width
diameter Width series Width series
Wo
do
over including
1, 2, 3
4
30
45
60
80
100
120
160
200
315
23932 239/1400
23022B 23048B 23052B 230/1120B
24024C 24038C 24024B 240/1120B
231
241
23120B 23136B 23138B 231/900B
24122B 241/710B
232
213
223
6
7
9
11
14
16
20
27
33
42
3
4
5
6
8
10
12
16
20
25
1.2
1.5
1.5
2.0
2.5
3.0
3.5
5.0
6.0
7.0
1.0
1.1
1.3
1.5
2.0
2.5
3.0
3.5
5.0
6.5
Table 4 Oil inlet number

Nominal bearing
outer diameter mm
over up to
including
320
1 010
22211E 22218E 22208C 22210C 22238B 22264B

22211B 22236B
30
45
60
80
100
120
160
200
315
Machined cage
239
230
240
222
Units mm
Oil groove depth
h
Table 2 Standard cage types

Bearing Molded resin cage
series
Wo
Zo do
320
1 010
Oil inlet
number
Zo
4
8
12
If a pin is necessary to prevent outer ring rotation, contact
23218B 232/750B
21308C 21310C 21311 21322
22308C 22310C 22330B 22360B
22311B 22328B
NTN Engineering.
3. Oil inlets and oil groove dimensions
Spherical roller bearings with an outer diameter of 320mm

or more are provided with an oil inlet and oil groove on the
outer ring for the purpose of supplying lubricant to the
bearing's moving parts. When necessary, oil inlets and oil
grooves can also be provided on bearings with outer
diameters less than 320 mm. In such cases, please add the
supplementary suffix code "D1" to the end of the bearing
number, and contact NTN Engineering. (Refer to page A-29)
Table 3 lists dimensions for oil inlets and oil grooves.
Table 4 contains information about the number of oil inlets.
Spherical roller bearings possess the same self-aligning

properties as other self-aligning bearings. The allowable
misalignment angle will vary according to dimension series
and load conditions, but the following misalignment angles
are generally standard:
Normal load (loads equivalent
to 0.09 sCr): 0.009rad (0.5)
Light load: 0.035rad (2)
B-230
5. Adapters and withdrawal sleeves

Adapters are used for installation of bearings with tapered
bore diameters on cylindrical shafts. Withdrawal sleeves are
also used to install and disassemble bearings with tapered
bore diameters onto and off of cylindrical shafts. In
disassembling the bearing from the shaft, the nut is pressed
down against the edge of the inner ring utilizing the bolt
provided on the withdrawal sleeve, and then the sleeve is
drawn away from the bearing's inner diameter surface.
For bearings with a bore diameter of 200 mm or more, high
pressure oil (hydraulic) type adapters and withdrawal sleeves
have been standardized to make installation and
disassembly easier. As shown in Diagram 2 construction is
designed to reduce friction by injecting high pressure oil
between the surfaces of the adapter sleeve and bearing
inner bore by means of a pressure fitting.
If the oil supply inlet is attached in the nut side of the
adapter, the supplementary suffix "HF" should be added to
the bearing number; if the oil supply inlet is attached on the
opposite side, the suffix "HB" should be added to the bearing
number. For adapter sleeves, the supplementary suffix "H" is
added to the bearing's number in both cases.
For the hydraulic sleeve's nut, the supplementary suffix
"SP" should be added to the nut's part number if a threaded
bolt hole will be provided for installation / disassembly
purposes; if a hole for a hydraulic pressure fitting will be
provided, "SPB" should be added to the end of the nut's part
number.
For more information regarding high pressure oil
(hydraulic) adapters and withdrawal sleeves, please
refer to their special catalog.
Diagram 2.
B-231
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 2575mm
Boundary dimensions
dynamic
mm
d
kN
rs min
25
52
18
30
62
35
Basic load ratings

static
dynamic
Limiting speeds
Bearing numbers
static
kgf
Cor
grease
oil
cylindrical
bore
tapered
bore
Cr
Cor
36.5
36
3,750
3,650
6,500
10,000
22205C
22205CK
20
49
49
5,000
5,000
5,700
8,800
22206C
22206CK
72
23
1.1
69.5
71
7,050
7,200
4,900
7,500
22207C
22207CK
40
80
90
90
23
23
33
1.1
1.5
1.5
79
88
121
88.5
90
128
8,050
8,950
12,300
9,000
9,150
13,000
4,300
3,200
3,800
6,600
4,900
5,900
22208C
21308C
22308C
22208CK
21308CK
22308CK
45
85
100
100
23
25
36
1.1
1.5
1.5
82.5
102
148
95
106
167
8,400
10,400
15,100
9,700
10,800
17,000
3,800
2,900
3,400
5,900
4,400
5,300
22209C
21309C
22309C
22209CK
21309CK
22309CK
50
90
110
110
23
27
40
1.1
2
2
86
118
186
102
127
212
8,750
12,000
19,000
10,400
12,900
21,600
3,500
2,600
3,100
5,300
4,000
4,800
22210C
21310C
22310C
22210CK
21310CK
22310CK
55
100
100
120
120
25
25
29
43
1.5
1.5
2
2
118
93.5
145
204
144
110
163
234
12,000
9,500
14,800
20,800
14,700
11,200
16,600
23,900
3,200
3,200
2,400
2,800
4,900
4,200
3,700
4,400
22211E
22211B
21311
22311B
22211EK
22211BK
21311K
22311BK
60
110
110
130
130
28
28
31
46
1.5
1.5
2.1
2.1
150
115
167
238
182
147
191
273
15,300
11,700
17,100
24,300
18,500
15,000
19,500
27,800
2,900
2,900
2,200
2,600
4,500
4,500
3,400
4,000
22212E
22212B
21312
22312B
22212EK
22212BK
21312K
22312BK
65
120
120
140
140
31
31
33
48
1.5
1.5
2.1
2.1
177
143
194
265
217
179
228
320
18,000
14,600
19,800
27,100
22,200
18,300
23,200
32,500
2,700
2,700
2,000
2,400
4,200
4,200
3,100
3,700
22213E
22213B
21313
22313B
22213EK
22213BK
21313K
22313BK
70
125
125
150
150
31
31
35
51
1.5
1.5
2.1
2.1
184
154
220
325
232
201
262
380
18,700
15,700
22,400
33,000
23,600
20,500
26,800
39,000
2,500
2,500
1,900
2,300
3,900
3,900
2,900
3,500
22214E
22214B
21314
22314B
22214EK
22214BK
21314K
22314BK
130
31
1.5
190
246
19,400
25,100
2,300
3,600
22215E
22215EK
75
Cr
rpm
1 This value was achieved with machined cages and molded resin cages; for pressed cages, 75% of this value is allowable.
B-232
ra
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
For values of e
Y1
Y2 and Yo
ra
Da
da
Constant
Axial load factors
Mass (approx.)
mm
min
kg
Da
da
max
ras
min
max
max
Y1
Y2
Yo
cylindrical
bore
tapered
bore
31
46
0.35
1.92
2.86
1.88
0.186
0.182
36
56
0.33
2.07
3.09
2.03
0.287
0.282
42
65
0.32
2.09
3.11
2.04
0.446
0.437
47
48.5
48.5
73
81.5
81.5
1
1.5
1.5
0.29
0.26
0.38
2.35
2.55
1.76
3.50
3.80
2.62
2.30
2.50
1.72
0.526
0.705
0.974
0.515
0.694
0.951
52
53.5
53.5
78
91.5
91.5
1
1.5
1.5
0.27
0.26
0.36
2.50
2.60
1.86
3.72
3.87
2.77
2.44
2.54
1.82
0.584
0.927
1.33
0.572
0.912
1.3
57
60
60
83
100
100
1
2
2
0.25
0.26
0.37
2.69
2.64
1.80
4.01
3.93
2.69
2.63
2.58
1.76
0.63
1.21
1.79
0.616
1.19
1.75
63.5
63.5
65
65
67
89.5
91.5
91.5
110
110
1.5
1.5
2
2
0.24
0.28
0.25
0.40
2.83
2.42
2.69
1.68
4.21
3.61
4.01
2.50
2.76
2.37
2.63
1.64
0.808
0.85
1.71
2.3
0.79
0.832
1.69
2.25
68.5
68.5
72
72
72
98
101.5
101.5
118
118
1.5
1.5
2
2
0.25
0.27
0.25
0.42
2.75
2.49
2.69
1.62
4.09
3.71
4.00
2.42
2.69
2.44
2.63
1.59
1.09
1.15
2.1
2.9
1.07
1.13
2.07
2.83
73.5
73.5
77
77
78.5
107
111.5
111.5
128
128
1.5
1.5
2
2
0.25
0.28
0.25
0.38
2.71
2.42
2.69
1.79
4.04
3.60
4.00
2.67
2.65
2.37
2.63
1.75
1.43
1.5
2.55
3.45
1.4
1.47
2.51
3.37
78.5
78.5
82
82
83.5
112.5
116.5
116.5
138
138
1.5
1.5
2
2
0.24
0.26
0.25
0.37
2.86
2.55
2.69
1.81
4.25
3.80
4.00
2.70
2.79
2.50
2.63
1.77
1.51
1.55
3.18
4.22
1.47
1.52
3.14
4.12
83.5
89
117.5
121.5
1.5
0.22
3.00
4.47
2.94
1.59
1.55
Note: Upon request, bearings with oil inlets and oil grooves on the outer ring can also be manufactured. In such cases, please add the suffix "D1" to
the end of the bearing number. (Example: 22214BD1)
B-233
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 75120mm
Boundary dimensions
dynamic
mm
Basic load ratings

static
dynamic
kN
Limiting speeds
Bearing numbers
static
kgf
rpm
Cr
Cor
Cr
Cor
grease
oil
cylindrical
bore
1.5
2.1
2.1
166
239
330
223
287
410
16,900
24,300
33,500
22,800
29,300
42,000
2,300
1,800
2,100
3,600
2,700
3,200
22215B
21315
22315B
22215BK
21315K
22315BK
33
33
39
58
2
2
2.1
2.1
213
179
260
385
277
239
315
470
21,700
18,300
26,500
39,500
28,200
24,400
32,000
48,000
2,200
2,200
1,700
2,000
3,400
3,400
2,500
3,000
22216E
22216B
21316
22316B
22216EK
22216BK
21316K
22316BK
85
150
150
180
180
36
36
41
60
2
2
3
3
251
206
289
415
320
272
355
510
25,600
21,000
29,500
42,500
33,000
27,800
36,000
52,000
2,100
2,100
1,600
1,900
3,200
3,200
2,400
2,900
22217E
22217B
21317
22317B
22217EK
22217BK
21317K
22317BK
90
160
160
160
190
190
40
40
52.4
43
64
2
2
2
3
3
292
256
315
320
480
385
345
455
400
590
29,800
26,200
32,500
32,500
49,000
39,500
35,000
46,500
40,500
60,000
1,900
1,900
1,800
1,500
1,800
3,000
3,000
2,800
2,300
2,700
22218E
22218B
23218B
21318
22318B
22218EK
22218BK
23218BK
21318K
22318BK
95
170
200
200
43
45
67
2.1
3
3
294
335
500
390
420
615
30,000
34,000
51,000
39,500
43,000
63,000
1,800
1,400
1,600
2,800
2,100
2,500
22219B
21319
22319B
22219BK
21319K
22319BK
100
165
180
180
215
215
52
46
60.3
47
73
2
2.1
2.1
3
3
310
315
405
370
605
470
415
580
465
755
31,500
32,000
41,500
37,500
61,500
47,500
42,500
59,000
47,500
77,000
1,700
1,700
1,600
1,300
1,600
2,600
2,700
2,500
2,000
2,400
23120B
22220B
23220B
21320
22320B
23120BK
22220BK
23220BK
21320K
22320BK
110
170
180
180
200
200
240
240
45
56
69
53
69.8
50
80
2
2
2
2.1
2.1
3
3
282
370
450
410
515
495
745
455
580
755
570
760
615
930
28,800
37,500
46,000
42,000
52,500
50,500
76,000
46,500
59,500
77,000
58,000
77,500
62,500
95,000
1,800
1,500
1,500
1,600
1,400
1,200
1,400
2,800
2,400
2,400
2,400
2,200
1,800
2,200
23022B
23122B
24122B
22222B
23222B
21322
22322B
23022BK
23122BK
24122BK30
22222BK
23222BK
21322K
22322BK
120
180
46
296
495
30,000
50,500
1,700
2,600
23024B
23024BK
rs min
75
130
160
160
31
37
55
80
140
140
170
170
2 Bearings appended with "K" have a tapered bore ratio of 1:12; bearings appended with "K30" have a tapered bore ratio of 1:30.
B-234
tapered
bore
ra
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
For values of e
Y1
Y2 and Yo
ra
Da
da
Constant
Axial load factors
Mass (approx.)
mm
kg
Da
da
ras
min
max
max
Y1
Y2
Yo
cylindrical
bore
121.5
148
148
1.5
2
2
0.24
0.24
0.37
2.81
2.84
1.80
4.19
4.23
2.69
2.75
2.78
1.76
1.65
3.81
5.25
1.61
3.76
5.13
90
90
92
92
94.5
125.5
130
130
158
158
2
2
2
2
0.22
0.26
0.23
0.37
3.01
2.64
2.95
1.80
4.48
3.93
4.39
2.69
2.94
2.58
2.88
1.76
1.99
2.15
4.53
6.05
1.94
2.11
4.47
5.91
95
95
99
99
100.5
135
140
140
166
166
2
2
2.5
2.5
0.23
0.26
0.25
0.37
2.96
2.60
2.69
1.82
4.41
3.88
4.00
2.71
2.90
2.55
2.63
1.78
2.49
2.66
5.35
7.1
2.43
2.61
5.28
6.94
100
100
100
104
104
107.5
144
150
150
150
176
176
2
2
2
2.5
2.5
0.24
0.26
0.33
0.24
0.37
2.86
2.55
2.04
2.83
1.80
4.25
3.80
3.03
4.22
2.69
2.79
2.49
1.99
2.77
1.76
3.24
3.5
4.45
6.3
8.35
3.16
3.42
4.32
6.21
8.16
107
109
109
158
186
186
2
2.5
2.5
0.26
0.23
0.37
2.63
3.00
1.80
3.92
4.46
2.69
2.57
2.93
1.76
4.1
7.1
9.76
4.01
7
9.54
110
112
112
114
114
155
168
168
201
201
2
2
2
2.5
2.5
0.32
0.26
0.34
0.22
0.37
2.12
2.55
1.98
3.01
1.80
3.15
3.80
2.94
4.48
2.69
2.07
2.49
1.93
2.94
1.76
4.3
4.95
6.47
8.89
12.4
4.16
4.84
6.28
8.78
12.1
120
120
120
122
122
124
124
160
170
170
188
188
226
226
2
2
2
2
2
2.5
2.5
0.26
0.31
0.38
0.27
0.35
0.21
0.36
2.59
2.17
1.76
2.51
1.91
3.20
1.87
3.85
3.24
2.63
3.74
2.84
4.77
2.79
2.53
2.13
1.73
2.46
1.86
3.13
1.83
3.71
5.4
7.07
7.2
9.71
11.2
17.1
3.58
5.22
6.96
7.04
9.43
11.1
16.7
130
170
0.25
2.69
4.01
2.63
4.05
3.9
min
max
83.5
87
87
tapered
bore
Note: Upon request, bearings with oil inlets and oil grooves on the outer ring can also be manufactured. In such cases, please add the suffix "D1" to
the end of the bearing number. (Example: 23024BD1)
B-235
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 120160mm
Boundary dimensions
dynamic
mm
kN
rs min
120
180
180
200
200
215
215
260
60
60
62
80
58
76
86
2
2
2
2
2.1
2.1
3
130
200
200
200
210
210
230
230
280
52
69
69
64
80
64
80
93
140
210
210
210
225
225
250
250
300
Cr
Basic load ratings

static
dynamic
Limiting speeds
kgf
Cor
Bearing numbers
static
rpm
Cr
Cor
grease
oil
cylindrical
bore
tapered
bore
390
395
455
575
485
585
880
670
695
705
945
700
880
1,120
39,500
40,000
46,500
58,500
49,500
59,500
89,500
68,500
71,000
71,500
96,500
71,500
89,500
114,000
1,500
1,500
1,400
1,400
1,400
1,300
1,300
2,300
2,300
2,100
2,100
2,200
2,000
2,000
24024B
24024C
23124B
24124B
22224B
23224B
22324B
24024BK30
24024CK30
23124BK
24124BK30
22224BK
23224BK
22324BK
2
2
2
2
2
3
3
4
375
505
490
495
585
570
685
1,000
620
895
860
795
995
790
1,060
1,290
38,500
51,500
50,000
50,500
60,000
58,000
70,000
102,000
63,500
91,000
87,500
81,000
102,000
80,500
108,000
131,000
1,500
1,300
1,300
1,300
1,300
1,300
1,200
1,200
2,300
2,100
2,100
2,000
2,000
2,000
1,900
1,800
23026B
24026B
24026C
23126B
24126B
22226B
23226B
22326B
23026BK
24026BK30
24026CK30
23126BK
24126BK30
22226BK
23226BK
22326BK
53
69
69
68
85
68
88
102
2
2
2
2.1
2.1
3
3
4
405
510
520
540
670
685
805
1,130
690
945
940
895
1,150
975
1,270
1,460
41,000
52,000
53,000
55,000
68,500
70,000
82,000
115,000
70,500
96,500
95,500
91,000
117,000
99,500
129,000
149,000
1,400
1,200
1,200
1,200
1,200
1,200
1,100
1,100
2,200
1,900
1,900
1,800
1,800
1,900
1,700
1,700
23028B
24028B
24028C
23128B
24128B
22228B
23228B
22328B
23028BK
24028BK30
24028CK30
23128BK
24128BK30
22228BK
23228BK
22328BK
150
225
225
225
250
250
270
270
320
56
75
75
80
100
73
96
108
2.1
2.1
2.1
2.1
2.1
3
3
4
445
585
600
730
885
775
935
1,270
775
1,060
1,090
1,190
1,520
1,160
1,460
1,750
45,500
59,500
61,000
74,500
90,500
79,000
95,000
130,000
79,000
108,000
111,000
121,000
155,000
119,000
149,000
179,000
1,300
1,200
1,200
1,100
1,100
1,100
1,000
1,000
2,000
1,800
1,800
1,700
1,700
1,700
1,600
1,600
23030B
24030B
24030C
23130B
24130B
22230B
23230B
22330B
23030BK
24030BK30
24030CK30
23130BK
24130BK30
22230BK
23230BK
22330BK
160
220
240
240
240
45
60
80
80
2
2.1
2.1
2.1
320
505
650
665
610
885
1,200
1,250
33,000
51,500
66,500
67,500
62,500
90,000
122,000
127,000
1,300
1,200
1,100
1,100
2,000
1,900
1,700
1,700
23932
23032B
24032B
24032C
23932K
23032BK
24032BK30
24032CK30
B-236
ra
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
For values of e
Y1
Y2 and Yo
ra
Da
da
Abutment and
fillet dimensions
Constant
Axial load factors
Mass (approx.)
da
mm
Da
ras
kg
min
max
max
Y1
Y2
Yo
130
130
130
130
132
132
134
170
170
190
190
203
203
246
2
2
2
2
2
2
2.5
0.33
0.32
0.31
0.40
0.27
0.36
0.37
2.06
2.12
2.17
1.68
2.47
1.89
1.80
3.07
3.15
3.24
2.50
3.68
2.82
2.69
2.02
2.07
2.13
1.64
2.42
1.85
1.76
5.48
5.48
7.7
10.3
9.1
12.1
21.5
5.39
4.91
7.46
10.1
8.89
11.7
21
140
140
140
140
140
144
144
148
190
190
190
200
200
216
216
262
2
2
2
2
2
2.5
2.5
3
0.26
0.34
0.32
0.30
0.38
0.28
0.35
0.37
2.63
1.98
2.12
2.23
1.78
2.39
1.92
1.81
3.92
2.95
3.15
3.32
2.65
3.56
2.86
2.69
2.57
1.94
2.07
2.18
1.74
2.33
1.88
1.77
5.9
8.08
7.91
8.47
11
11.2
14.3
26.8
5.69
7.95
7.78
8.2
10.8
10.9
13.9
26.2
150
150
150
152
152
154
154
158
200
200
200
213
213
236
236
282
2
2
2
2
2
2.5
2.5
3
0.25
0.32
0.30
0.30
0.38
0.28
0.36
0.37
2.73
2.09
2.23
2.25
1.80
2.39
1.90
1.80
4.06
3.12
3.32
3.35
2.68
3.55
2.83
2.69
2.67
2.05
2.18
2.20
1.76
2.33
1.86
1.76
6.35
8.57
8.48
10.2
13.3
14
18.8
33.8
6.12
8.43
7.66
9.86
13.1
13.7
18.2
33
162
162
162
162
162
164
164
168
213
213
213
238
238
256
256
302
2
2
2
2
2
2.5
2.5
3
0.24
0.33
0.30
0.32
0.40
0.27
0.36
0.35
2.76
2.06
2.25
2.11
1.69
2.46
1.88
1.92
4.11
3.07
3.34
3.15
2.51
3.66
2.79
2.86
2.70
2.02
2.20
2.06
1.65
2.4
1.83
1.88
7.73
10.7
10.5
15.6
20.2
18.1
24.1
42.7
7.45
10.5
10.3
15.1
20
17.7
23.4
41.8
170
172
172
172
210
228
228
228
2
2
2
2
0.18
0.25
0.32
0.31
3.69
2.74
2.10
2.18
5.49
4.09
3.13
3.24
3.61
2.68
2.06
2.13
5.5
9.42
13
12
5.33
9.09
12.8
11.8
cylindrical
bore
tapered
bore
Note: When the outer diameter of a Spherical Roller Bearing is 320mm or larger, an oil groove is on OD. See page B-230 on dimensions. We can make bearings
with oil hole or oil groove in the outer ring, per your request, for an outer diameter of 320mm or less. Such bearings are indicated by attaching "D1" to the end of
the bearing number. (ex. 23032BD1)
B-237
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 160200mm
Boundary dimensions
dynamic
mm
Basic load ratings

static
dynamic
kN
Limiting speeds
Bearing numbers
static
kgf
rpm
Cr
Cor
Cr
Cor
grease
oil
cylindrical
bore
2.1
2.1
3
3
4
840
1,040
870
1,050
1,410
1,370
1,780
1,290
1,660
1,990
85,500
106,000
88,500
107,000
144,000
140,000
181,000
132,000
170,000
203,000
1,000
1,000
1,000
960
940
1,600
1,600
1,600
1,500
1,500
23132B
24132B
22232B
23232B
22332B
23132BK
24132BK30
22232BK
23232BK
22332BK
45
67
90
90
88
109
86
110
120
2
2.1
2.1
2.1
2.1
2.1
4
4
4
330
630
800
815
885
1,080
1,000
1,180
1,540
650
1,080
1,470
1,500
1,490
1,880
1,520
1,960
2,180
34,000
64,000
81,500
83,000
90,500
110,000
102,000
120,000
157,000
66,000
110,000
150,000
153,000
152,000
191,000
155,000
200,000
223,000
1,200
1,100
1,000
1,000
960
960
980
910
880
1,900
1,800
1,600
1,600
1,500
1,500
1,500
1,400
1,400
23934
23034B
24034B
24034C
23134B
24134B
22234B
23234B
22334B
23934K
23034BK
24034BK30
24034CK30
23134BK
24134BK30
22234BK
23234BK
22334BK
180
250
280
280
280
300
300
320
320
380
52
74
100
100
96
118
86
112
126
2
2.1
2.1
2.1
3
3
4
4
4
440
740
965
965
1,030
1,250
1,040
1,230
1,740
835
1,290
1,770
1,770
1,730
2,210
1,610
2,000
2,560
45,000
75,500
98,500
98,500
105,000
127,000
106,000
125,000
177,000
85,000
132,000
181,000
181,000
176,000
225,000
164,000
204,000
261,000
1,200
1,100
950
950
900
900
920
850
830
1,800
1,700
1,500
1,500
1,400
1,400
1,400
1,300
1,300
23936
23036B
24036B
24036C
23136B
24136B
22236B
23236B
22336B
23936K
23036BK
24036BK30
24036CK30
23136BK
24136BK30
22236BK
23236BK
22336BK
190
260
290
290
290
320
320
340
340
400
52
75
100
100
104
128
92
120
132
2
2.1
2.1
2.1
3
3
4
4
5
460
755
995
970
1,190
1,420
1,160
1,400
1,870
890
1,350
1,850
1,820
2,020
2,480
1,810
2,330
2,790
47,000
77,000
102,000
98,500
122,000
144,000
118,000
143,000
191,000
91,000
138,000
188,000
186,000
206,000
253,000
185,000
237,000
284,000
1,100
1,000
900
900
850
850
860
790
780
1,700
1,600
1,400
1,400
1,300
1,300
1,300
1,200
1,200
23938
23038B
24038B
24038C
23138B
24138B
22238B
23238B
22338B
23938K
23038BK
24038BK30
24038CK30
23138BK
24138BK30
22238BK
23238BK
22338BK
200
280
310
310
60
82
109
2.1
2.1
2.1
545
915
1,160
1,100
1,620
2,140
56,000
93,000
118,000
112,000
165,000
219,000
1,000
960
850
1,600
1,500
1,300
23940
23040B
24040B
23940K
23040BK
24040BK30
rs min
160
270
270
290
290
340
86
109
80
104
114
170
230
260
260
260
280
280
310
310
360
B-238
tapered
bore
ra
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
For values of e
Y1
Y2 and Yo
ra
Da
da
Abutment and
fillet dimensions
Constant
Axial load factors
da
mm
Da
ras
min
max
max
Y1
Y2
172
172
174
174
178
258
258
276
276
322
2
2
2.5
2.5
3
0.32
0.40
0.28
0.36
0.35
2.11
1.67
2.42
1.86
1.94
180
182
182
182
182
182
188
188
188
220
248
248
248
268
268
292
292
342
2
2
2
2
2
2
3
3
3
0.17
0.25
0.34
0.31
0.31
0.39
0.28
0.36
0.34
190
192
192
192
194
194
198
198
198
240
268
268
268
286
286
302
302
362
2
2
2
2
2.5
2.5
3
3
3
200
202
202
202
204
204
208
208
212
250
278
278
278
306
306
322
322
378
212
212
212
268
298
298
Mass (approx.)
kg
Yo
cylindrical
bore
tapered
bore
3.15
2.48
3.60
2.77
2.89
2.07
1.63
2.37
1.82
1.90
19.8
26
22.7
30
50.8
19.2
25.6
22.2
29.1
49.7
3.91
2.66
1.98
2.16
2.15
1.74
2.39
1.87
1.96
5.83
3.96
2.95
3.22
3.21
2.59
3.56
2.79
2.91
3.83
2.60
1.94
2.12
2.11
1.70
2.34
1.83
1.91
5.8
12.7
17.7
17.4
21.5
27.2
28
36.8
59.8
5.62
12.3
17.4
17.1
20.8
26.8
27.3
35.7
58.5
0.19
0.26
0.35
0.33
0.32
0.39
0.27
0.35
0.34
3.52
2.59
1.91
2.04
2.11
1.72
2.49
1.91
1.97
5.25
3.85
2.85
3.04
3.15
2.56
3.70
2.84
2.93
3.45
2.53
1.87
2.00
2.07
1.68
2.43
1.86
1.92
8.21
16.7
23.3
23
25.1
34.3
29.3
39
70
7.95
16.1
22.9
22.6
24.2
33.8
28.6
37.8
68.5
2
2
2
2
2.5
2.5
3
3
4
0.18
0.26
0.33
0.31
0.33
0.40
0.27
0.36
0.34
3.81
2.65
2.03
2.16
2.07
1.69
2.47
1.89
1.97
5.67
3.94
3.02
3.22
3.09
2.51
3.68
2.82
2.94
3.73
2.59
1.98
2.12
2.03
1.65
2.42
1.85
1.93
8.6
17.7
24.3
23
35.3
42.8
36.6
47.6
81
8.34
17.1
23.9
22.6
34.2
42.2
35.8
46.2
79.3
2
2
2
0.17
0.26
0.35
3.91
2.59
1.94
5.82
3.85
2.89
3.82
2.53
1.90
12.1
22.7
31
11.7
21.9
30.5
Note: When the outer diameter of a Spherical Roller Bearing is 320mm or larger, an oil groove is on OD. See page B-230 on dimensions. We can make bearings
with oil hole or oil groove in the outer ring, per your request, for an outer diameter of 320mm or less. Such bearings are indicated by attaching "D1" to the end of
the bearing number. (ex. 23040BD1)
B-239
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 200280mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
200
340
340
360
360
420
112
140
98
128
138
220
300
340
340
370
370
400
400
460
rs min
Limiting speeds
Bearing numbers
static
kgf
rpm
oil
cylindrical
bore
800
800
820
750
740
1,200
1,200
1,300
1,200
1,100
23140B
24140B
22240B
23240B
22340B
23140BK
24140BK30
22240BK
23240BK
22340BK
119,000
195,000
262,000
272,000
345,000
251,000
340,000
360,000
930
870
770
720
720
730
670
660
1,400
1,300
1,200
1,100
1,100
1,100
1,000
1,000
23944
23044B
24044B
23144B
24144B
22244B
23244B
22344B
23944K
23044BK
24044BK30
23144BK
24144BK30
22244BK
23244BK
22344BK
58,000
116,000
144,000
177,000
215,000
198,000
247,000
278,000
121,000
219,000
282,000
310,000
390,000
315,000
420,000
420,000
840
790
700
650
650
660
610
600
1,300
1,200
1,100
1,000
1,000
1,000
940
930
23948
23048B
24048B
23148B
24148B
22248B
23248B
22348B
23948K
23048BK
24048BK30
23148BK
24148BK30
22248BK
23248BK
22348BK
1,580
2,620
3,550
3,850
4,600
3,600
4,700
4,750
77,500
144,000
186,000
219,000
256,000
228,000
281,000
320,000
161,000
267,000
365,000
395,000
470,000
365,000
480,000
485,000
770
720
640
600
600
610
560
550
1,200
1,100
980
920
920
930
860
850
23952
23052B
24052B
23152B
24152B
22252B
23252B
22352B
23952K
23052BK
24052BK30
23152BK
24152BK30
22252BK
23252BK
22352BK
1,750
2,920
3,950
4,250
5,200
3,800
84,500
154,000
199,000
234,000
278,000
236,000
179,000
297,000
405,000
435,000
530,000
390,000
710
660
590
550
550
560
1,100
1,000
900
850
850
860
23956
23056B
24056B
23156B
24156B
22256B
23956K
23056BK
24056BK30
23156BK
24156BK30
22256BK
Cr
Cor
Cr
Cor
3
3
4
4
5
1,350
1,630
1,310
1,610
2,040
2,270
2,900
2,010
2,640
3,050
137,000
166,000
134,000
165,000
208,000
231,000
295,000
205,000
269,000
310,000
60
90
118
120
150
108
144
145
2.1
3
3
4
4
4
4
5
565
1,060
1,350
1,540
1,880
1,580
2,010
2,350
1,170
1,920
2,570
2,670
3,400
2,460
3,350
3,500
57,500
108,000
138,000
157,000
192,000
161,000
205,000
240,000
240
320
360
360
400
400
440
440
500
60
92
118
128
160
120
160
155
2.1
3
3
4
4
4
4
5
565
1,130
1,410
1,730
2,110
1,940
2,430
2,720
1,190
2,140
2,770
3,050
3,800
3,100
4,100
4,100
260
360
400
400
440
440
480
480
540
75
104
140
144
180
130
174
165
2.1
4
4
4
4
5
5
6
760
1,420
1,830
2,140
2,510
2,230
2,760
3,100
280
380
420
420
460
460
500
75
106
140
146
180
130
2.1
4
4
5
5
5
830
1,510
1,950
2,300
2,730
2,310
grease
B-240
tapered
bore
ra
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
For values of e
Y1
Y2 and Yo
ra
Da
da
Abutment and
fillet dimensions
Constant
Axial load factors
da
mm
Da
ras
min
max
max
Y1
Y2
214
214
218
218
222
326
326
342
342
398
2.5
2.5
3
3
4
0.33
0.41
0.28
0.36
0.34
2.05
1.64
2.45
1.88
1.98
232
234
234
238
238
238
238
242
288
326
326
352
352
382
382
438
2
2.5
2.5
3
3
3
3
4
0.19
0.26
0.34
0.33
0.41
0.27
0.36
0.33
252
254
254
258
258
258
258
262
308
346
346
382
382
422
422
478
2
2.5
2.5
3
3
3
3
4
272
278
278
278
278
282
282
288
348
382
382
422
422
458
458
512
292
298
298
302
302
302
368
402
402
438
438
478
Mass (approx.)
kg
Yo
cylindrical
bore
tapered
bore
3.05
2.44
3.64
2.79
2.95
2.00
1.60
2.39
1.83
1.94
43.3
53.4
44
57.2
93.2
42
52.6
43
55.5
91.2
3.62
2.59
1.97
2.07
1.66
2.46
1.85
2.06
5.39
3.85
2.94
3.09
2.47
3.66
2.76
3.07
3.54
2.53
1.93
2.03
1.62
2.40
1.81
2.02
13.1
29.9
40.2
53.3
67
60.4
80
117
12.7
28.8
39.6
51.6
66
59.1
77.6
115
0.16
0.25
0.32
0.32
0.40
0.28
0.37
0.32
4.13
2.69
2.09
2.11
1.69
2.43
1.83
2.10
6.15
4.01
3.12
3.15
2.51
3.62
2.72
3.13
4.04
2.63
2.05
2.07
1.65
2.38
1.79
2.06
14
33.4
43
65.8
82.2
81.7
108
148
13.6
32.2
42.3
63.8
80.9
80
105
145
2
3
3
3
3
4
4
5
0.19
0.26
0.34
0.33
0.41
0.28
0.37
0.32
3.53
2.63
1.96
2.05
1.63
2.45
1.83
2.13
5.26
3.92
2.91
3.06
2.43
3.64
2.72
3.18
3.45
2.57
1.91
2.01
1.60
2.39
1.79
2.09
24
48.5
65.2
91.4
114
106
141
183
23.3
46.8
64.1
88.6
112
104
137
179
2
3
3
4
4
4
0.17
0.25
0.33
0.32
0.39
0.26
3.88
2.73
2.06
2.13
1.73
2.57
5.78
4.06
3.07
3.18
2.58
3.83
3.79
2.67
2.02
2.09
1.69
2.51
26.4
52.4
69
97.7
120
112
25.6
50.6
67.9
94.6
118
110
Note: Please refer to page B-230 for outer ring oil inlet and oil groove dimensions.
B-241
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 280380mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
280
500
580
176
175
300
420
460
460
500
500
540
540
620
rs min
Limiting speeds
Bearing numbers
static
kgf
rpm
oil
cylindrical
bore
510
500
790
780
23256B
22356B
23256BK
22356BK
237,000
365,000
505,000
510,000
650,000
440,000
615,000
550,000
650
610
540
510
510
510
470
470
1,000
940
840
780
780
790
730
720
23960
23060B
24060B
23160B
24160B
22260B
23260B
22360B
23960K
23060BK
24060BK30
23160BK
24160BK30
22260BK
23260BK
22360BK
116,000
200,000
255,000
320,000
390,000
315,000
410,000
251,000
395,000
530,000
590,000
745,000
515,000
720,000
610
570
500
470
470
480
440
930
880
780
730
730
730
680
23964
23064B
24064B
23164B
24164B
22264B
23264B
23964K
23064BK
24064BK30
23164BK
24164BK30
22264BK
23264BK
2,650
4,550
6,200
6,600
8,950
8,000
124,000
235,000
305,000
365,000
470,000
455,000
270,000
465,000
630,000
670,000
910,000
815,000
570
530
470
440
440
410
870
820
720
680
680
630
23968
23068B
24068B
23168B
24168B
23268B
23968K
23068BK
24068BK30
23168BK
24168BK30
23268BK
1,320
2,370
3,100
3,750
4,600
4,850
2,930
4,700
6,600
7,050
9,150
8,700
135,000
242,000
320,000
385,000
470,000
495,000
298,000
480,000
675,000
715,000
935,000
885,000
530
500
440
410
410
380
820
770
680
630
630
590
23972
23072B
24072B
23172B
24172B
23272B
23972K
23072BK
24072BK30
23172BK
24172BK30
23272BK
1,560
2,510
3,250
3,900
4,800
3,550
5,150
7,100
7,500
9,650
159,000
256,000
330,000
400,000
490,000
360,000
525,000
725,000
765,000
985,000
500
470
410
390
390
770
720
640
590
590
23976
23076B
24076B
23176B
24176B
23976K
23076BK
24076BK30
23176BK
24176BK30
Cr
Cor
Cr
Cor
5
6
2,930
3,500
5,150
5,350
298,000
360,000
525,000
545,000
90
118
160
160
200
140
192
185
3
4
4
5
5
5
5
7.5
1,110
1,890
2,450
2,750
3,300
2,670
3,450
3,600
2,320
3,550
4,950
5,000
6,400
4,350
6,000
5,400
113,000
193,000
250,000
280,000
340,000
272,000
355,000
365,000
320
440
480
480
540
540
580
580
90
121
160
176
218
150
208
3
4
4
5
5
5
5
1,140
1,960
2,510
3,100
3,850
3,100
4,000
2,460
3,850
5,200
5,800
7,300
5,050
7,050
340
460
520
520
580
580
620
90
133
180
190
243
224
3
5
5
5
5
6
1,220
2,310
3,000
3,600
4,600
4,450
360
480
540
540
600
600
650
90
134
180
192
243
232
3
5
5
5
5
6
380
520
560
560
620
620
106
135
180
194
243
4
5
5
5
5
grease
B-242
tapered
bore
ra
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
For values of e
Y1
Y2 and Yo
ra
Da
da
Abutment and
fillet dimensions
Constant
da
mm
Da
ras
min
max
max
302
308
478
552
314
318
318
322
322
322
322
336
Axial load factors
Mass (approx.)
kg
cylindrical
bore
tapered
bore
Y1
Y2
Yo
4
5
0.36
0.31
1.90
2.16
2.83
3.22
1.86
2.12
150
224
145
220
406
442
442
478
478
518
518
584
2.5
3
3
4
4
4
4
6
0.20
0.25
0.34
0.32
0.40
0.26
0.36
0.32
3.34
2.66
1.97
2.11
1.69
2.57
1.88
2.13
4.98
3.96
2.93
3.15
2.51
3.83
2.79
3.17
3.27
2.60
1.92
2.07
1.65
2.51
1.83
2.08
40
72.4
98
131
161
141
193
270
38.7
70.2
96.4
127
159
138
187
265
334
338
338
342
342
342
342
426
462
462
518
518
558
558
2.5
3
3
4
4
4
4
0.19
0.25
0.33
0.33
0.40
0.26
0.36
3.50
2.73
2.06
2.06
1.67
2.57
1.86
5.21
4.06
3.07
3.07
2.48
3.83
2.77
3.42
2.67
2.02
2.02
1.63
2.51
1.82
43
78.2
103
167
207
172
243
41.7
75.5
101
162
204
168
236
354
362
362
362
362
368
446
498
498
558
558
592
2.5
4
4
4
4
5
0.17
0.25
0.34
0.33
0.42
0.37
3.91
2.68
1.98
2.05
1.61
1.84
5.83
3.99
2.95
3.06
2.39
2.75
3.83
2.62
1.94
2.01
1.57
1.80
44.7
104
140
210
269
300
43.3
100
138
204
265
291
374
382
382
382
382
388
466
518
518
578
578
622
2.5
4
4
4
4
5
0.17
0.24
0.33
0.32
0.40
0.36
3.99
2.78
2.06
2.11
1.67
1.87
5.93
4.14
3.07
3.15
2.48
2.78
3.90
2.72
2.02
2.07
1.63
1.83
47.2
110
147
222
281
339
45.7
106
145
215
277
329
398
402
402
402
402
502
538
538
598
598
3
4
4
4
4
0.19
0.24
0.30
0.31
0.39
3.54
2.87
2.23
2.16
1.73
5.27
4.27
3.32
3.22
2.58
3.46
2.80
2.18
2.12
1.69
69.9
115
153
235
292
67.7
111
150
228
287
B-243
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 380500mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
Limiting speeds
Bearing numbers
static
kgf
rpm
oil
cylindrical
bore
360
550
23276B
23276BK
161,000
370,000
305,000
615,000
390,000
855,000
425,000
820,000
520,000 1,060,000
595,000 1,080,000
470
440
390
360
360
340
720
680
600
560
560
520
23980
23080B
24080B
23180B
24180B
23280B
23980K
23080BK
24080BK30
23180BK
24180BK30
23280BK
3,850
6,400
8,450
9,950
12,200
12,000
166,000
390,000
315,000
650,000
395,000
865,000
530,000 1,020,000
625,000 1,240,000
665,000 1,230,000
450
420
370
350
350
320
690
640
570
530
530
490
23984
23084B
24084B
23184B
24184B
23284B
23984K
23084BK
24084BK30
23184BK
24184BK30
23284BK
2,030
3,300
4,300
5,200
6,450
6,900
4,700
6,850
9,450
10,100
13,100
12,800
207,000
480,000
335,000
695,000
440,000
960,000
530,000 1,030,000
660,000 1,330,000
705,000 1,310,000
420
400
350
330
330
300
650
610
540
500
500
470
23988
23088B
24088B
23188B
24188B
23288B
23988K
23088BK
24088BK30
23188BK
24188BK30
23288BK
4
6
6
7.5
7.5
7.5
2,100
3,600
4,600
5,700
7,100
7,750
4,950
7,450
10,200
11,400
14,500
14,500
214,000
365,000
470,000
585,000
725,000
790,000
505,000
760,000
1,040,000
1,160,000
1,480,000
1,470,000
400
370
330
310
310
290
620
580
510
470
470
440
23992
23092B
24092B
23192B
24192B
23292B
23992K
23092BK
24092BK30
23192BK
24192BK30
23292BK
128
165
218
248
308
310
5
6
6
7.5
7.5
7.5
2,330
3,650
4,650
6,200
7,450
8,300
5,500
7,700
10,500
12,300
15,300
15,500
238,000
370,000
475,000
635,000
760,000
845,000
565,000
785,000
1,070,000
1,260,000
1,560,000
1,580,000
380
360
320
290
290
270
590
550
490
450
450
420
23996
23096B
24096B
23196B
24196B
23296B
23996K
23096BK
24096BK30
23196BK
24196BK30
23296BK
128
167
5
6
2,370
3,850
5,600
8,300
242,000
390,000
570,000
845,000
360
340
560
530
239/500
239/500K
230/500B 230/500BK
380
680
240
400
540
600
600
650
650
720
rs min
Cr
Cor
Cr
Cor
5,200
9,650
530,000
985,000
106
148
200
200
250
256
4
5
5
6
6
6
1,580
2,980
3,850
4,200
5,100
5,850
3,650
6,050
8,400
8,050
10,300
10,600
420
560
620
620
700
700
760
106
150
200
224
280
272
4
5
5
6
6
7.5
1,630
3,100
3,850
5,200
6,150
6,550
440
600
650
650
720
720
790
118
157
212
226
280
280
4
6
6
6
6
7.5
460
620
680
680
760
760
830
118
163
218
240
300
296
480
650
700
700
790
790
870
500
670
720
grease
B-244
tapered
bore
ra
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
For values of e
Y1
Y2 and Yo
ra
Da
da
Abutment and
fillet dimensions
Constant
da
mm
Da
ras
min
max
max
408
652
418
422
422
428
428
428
Axial load factors
Mass (approx.)
kg
cylindrical
bore
tapered
bore
Y1
Y2
Yo
0.36
1.89
2.82
1.85
380
369
522
578
578
622
622
692
3
4
4
5
5
5
0.18
0.24
0.32
0.31
0.38
0.37
3.71
2.80
2.09
2.21
1.77
1.81
5.53
4.16
3.11
3.28
2.63
2.69
3.63
2.73
2.04
2.16
1.73
1.77
73
149
202
264
329
457
70.7
144
200
256
324
443
438
442
442
448
448
456
542
598
598
672
672
724
3
4
4
5
5
6
0.17
0.24
0.32
0.32
0.40
0.36
3.95
2.85
2.13
2.11
1.69
1.86
5.88
4.24
3.18
3.15
2.51
2.77
3.86
2.78
2.09
2.07
1.65
1.82
76.2
157
210
354
440
544
73.8
152
207
343
433
528
458
468
468
468
468
476
582
622
622
692
692
754
3
5
5
5
5
6
0.18
0.24
0.32
0.31
0.39
0.36
3.66
2.85
2.11
2.15
1.75
1.88
5.46
4.24
3.15
3.21
2.61
2.80
3.58
2.78
2.07
2.11
1.71
1.84
101
181
245
370
456
600
98
175
241
358
449
582
478
488
488
496
496
496
602
652
652
724
724
794
3
5
5
6
6
6
0.17
0.23
0.31
0.31
0.39
0.36
3.95
2.88
2.15
2.14
1.71
1.87
5.88
4.29
3.21
3.19
2.55
2.78
3.86
2.82
2.11
2.10
1.67
1.83
107
206
276
443
550
704
104
200
272
429
541
683
502
508
508
516
516
516
628
672
672
754
754
834
4
5
5
6
6
6
0.18
0.23
0.30
0.31
0.39
0.36
3.85
2.94
2.22
2.15
1.74
1.87
5.73
4.38
3.30
3.21
2.59
2.78
3.76
2.88
2.17
2.11
1.70
1.83
123
217
285
492
608
814
119
209
280
477
600
790
522
528
648
692
4
5
0.17
0.23
4.02
2.98
5.98
4.44
3.93
2.91
131
226
127
218
B-245
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 500670mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
2
Limiting speeds
Bearing numbers
static
kgf
rpm
oil
cylindrical
bore
300
280
280
260
460
430
430
400
240/500B
231/500B
241/500B
232/500B
240/500BK30
231/500BK
241/500BK30
232/500BK
655,000
955,000
1,290,000
1,450,000
1,770,000
2,020,000
340
320
280
260
260
240
520
490
430
400
400
370
239/530
230/530B
240/530B
231/530B
241/530B
232/530B
239/530K
230/530BK
240/530BK30
231/530BK
241/530BK30
232/530BK
288,000
490,000
620,000
780,000
1,010,000
1,130,000
680,000
1,070,000
1,440,000
1,580,000
2,120,000
2,150,000
320
300
260
240
240
220
490
450
400
370
370
340
239/560
230/560B
240/560B
231/560B
241/560B
232/560B
239/560K
230/560BK
240/560BK30
231/560BK
241/560BK30
232/560BK
7,800
12,000
15,600
18,400
23,200
23,700
325,000
535,000
655,000
920,000
1,090,000
1,240,000
795,000
1,220,000
1,590,000
1,880,000
2,360,000
2,420,000
290
270
240
220
220
210
450
420
370
340
340
320
239/600
230/600B
240/600B
231/600B
241/600B
232/600B
239/600K
230/600BK
240/600BK30
231/600BK
241/600BK30
232/600BK
3,700
5,900
7,550
9,600
11,600
13,700
9,250
13,000
17,900
19,900
25,000
26,800
375,000
600,000
770,000
975,000
1,180,000
1,400,000
945,000
1,330,000
1,830,000
2,030,000
2,550,000
2,740,000
270
260
230
210
210
190
420
400
350
320
320
300
239/630
230/630B
240/630B
231/630B
241/630B
232/630B
239/630K
230/630BK
240/630BK30
231/630BK
241/630BK30
232/630BK
4,100
6,550
8,650
11,000
12,700
16,100
10,300
14,600
20,600
22,800
28,000
32,000
420,000
665,000
885,000
1,120,000
1,300,000
1,640,000
1,050,000
1,490,000
2,100,000
2,330,000
2,850,000
3,250,000
250
240
210
190
190
180
390
360
320
300
300
280
239/670
230/670B
240/670B
231/670B
241/670B
232/670B
239/670K
230/670BK
240/670BK30
231/670BK
241/670BK30
232/670BK
rs min
Cr
Cor
Cr
500
720
830
830
920
218
264
325
336
6
7.5
7.5
7.5
4,750
6,950
8,050
9,400
530
710
780
780
870
870
980
136
185
250
272
335
355
5
6
6
7.5
7.5
9.5
560
750
820
820
920
920
1,030
140
195
258
280
355
365
600
800
870
870
980
980
1,090
Cor
10,900
13,700
16,700
17,800
485,000
705,000
825,000
960,000
1,110,000
1,400,000
1,700,000
1,820,000
2,640
4,400
5,600
7,000
8,300
10,400
6,450
269,000
9,350
445,000
12,700
570,000
14,200
715,000
17,400
850,000
19,800 1,060,000
5
6
6
7.5
7.5
9.5
2,830
4,800
6,100
7,650
9,950
11,100
6,700
10,500
14,100
15,500
20,800
21,100
150
200
272
300
375
388
5
6
6
7.5
7.5
9.5
3,150
5,250
6,450
9,000
10,700
12,200
630
850
920
920
1,030
1,030
1,150
165
212
290
315
400
412
6
7.5
7.5
7.5
7.5
12
670
900
980
980
1,090
1,090
1,220
170
230
308
336
412
438
6
7.5
7.5
7.5
7.5
12
grease
B-246
tapered
bore
ra
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
For values of e
Y1
Y2 and Yo
ra
Da
da
Abutment and
fillet dimensions
Constant
Axial load factors
Mass (approx.)
mm
kg
da
Da
ras
min
max
max
528
536
536
536
692
794
794
884
552
558
558
566
566
574
cylindrical
bore
tapered
bore
Y1
Y2
Yo
5
6
6
6
0.30
0.32
0.39
0.39
2.28
2.12
1.72
1.74
3.40
3.16
2.57
2.59
2.23
2.08
1.69
1.70
688
752
752
834
834
936
4
5
5
6
6
8
0.17
0.22
0.30
0.30
0.38
0.39
3.94
3.03
2.24
2.22
1.79
1.74
5.87
4.52
3.33
3.30
2.67
2.59
3.86
2.97
2.19
2.17
1.75
1.70
157
306
413
653
800
1,200
152
295
406
633
788
1,170
582
588
588
596
596
604
728
792
792
884
884
986
4
5
5
6
6
8
0.16
0.22
0.30
0.30
0.39
0.36
4.09
3.03
2.29
2.27
1.75
1.88
6.09
4.51
3.40
3.38
2.61
2.80
4.00
2.96
2.24
2.22
1.71
1.84
182
353
467
752
948
1,360
176
340
459
729
934
1,320
622
628
628
636
636
644
778
842
842
944
944
1,046
4
5
5
6
6
8
0.18
0.21
0.29
0.30
0.37
0.36
3.85
3.17
2.33
2.22
1.81
1.86
5.73
4.72
3.47
3.30
2.70
2.77
3.76
3.10
2.28
2.17
1.77
1.82
218
400
544
908
1,130
1,540
211
386
535
880
1,110
1,490
658
666
666
666
666
684
822
884
884
994
994
1,096
5
6
6
6
6
10
0.18
0.22
0.30
0.30
0.38
0.36
3.66
3.14
2.28
2.27
1.78
1.87
5.45
4.67
3.40
3.38
2.66
2.78
3.58
3.07
2.23
2.22
1.74
1.83
277
481
657
1,050
1,330
1,900
268
464
646
1,020
1,310
1,840
698
706
706
706
706
724
872
944
944
1,054
1,054
1,166
5
6
6
6
6
10
0.18
0.22
0.29
0.30
0.37
0.36
3.76
3.07
2.29
2.22
1.83
1.89
5.59
4.57
3.41
3.30
2.73
2.81
3.67
3.00
2.24
2.17
1.79
1.85
317
594
794
1,250
1,530
2,270
307
573
781
1,210
1,510
2,200
295
584
716
1,000
B-247
290
566
705
971
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 7101060mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
B
rs min
Limiting speeds
kgf
Cr
Cor
Cr
Bearing numbers
static
rpm
Cor
grease
oil
cylindrical
bore
tapered
bore
710
950
1,030
1,030
1,150
1,150
1,280
180
236
315
345
438
450
6
7.5
7.5
9.5
9.5
12
4,450
7,200
9,300
11,600
14,500
16,300
11,500
16,200
22,500
24,900
32,000
32,500
450,000
730,000
945,000
1,190,000
1,470,000
1,660,000
1,170,000
1,650,000
2,300,000
2,540,000
3,250,000
3,300,000
240
220
200
180
180
170
370
340
300
280
280
260
239/710
230/710B
240/710B
231/710B
241/710B
232/710B
239/710K
230/710BK
240/710BK30
231/710BK
241/710BK30
232/710BK
750
1,000
1,090
1,090
1,220
1,360
185
250
335
365
475
6
7.5
7.5
9.5
15
5,000
8,150
10,100
12,800
18,200
13,000
18,300
24,600
27,200
36,500
510,000
835,000
1,030,000
1,310,000
1,860,000
1,330,000
1,860,000
2,500,000
2,780,000
3,750,000
220
210
180
170
160
340
320
280
260
240
239/750
230/750B
240/750B
231/750B
232/750B
239/750K
230/750BK
240/750BK30
231/750BK
232/750BK
800
1,060
1,150
1,150
1,280
195
258
345
375
6
7.5
7.5
9.5
5,400
8,400
11,200
14,400
13,700
19,500
27,800
31,000
550,000
860,000
1,140,000
1,460,000
1,400,000
1,990,000
2,840,000
3,150,000
200
190
170
150
310
290
260
240
239/800
230/800B
240/800B
231/800B
239/800K
230/800BK
240/800BK30
231/800BK
850
1,120
1,220
1,220
1,360
200
272
365
400
6
7.5
7.5
12
5,850
9,750
12,500
15,500
15,100
22,700
31,500
34,000
595,000
995,000
1,270,000
1,580,000
1,540,000
2,310,000
3,200,000
3,500,000
190
170
150
140
290
270
240
220
239/850
230/850B
240/850B
231/850B
239/850K
230/850BK
240/850BK30
231/850BK
900
1,180
1,280
1,280
1,420
206
280
375
412
6
7.5
7.5
12
6,650
10,300
13,200
16,800
17,300
24,700
33,500
38,000
675,000
1,050,000
1,350,000
1,720,000
1,770,000
2,520,000
3,450,000
3,850,000
170
160
140
130
270
250
220
200
239/900
230/900B
240/900B
231/900B
239/900K
230/900BK
240/900BK30
231/900BK
950
1,250
1,360
1,360
224
300
412
7.5
7.5
7.5
7,750
11,500
15,500
20,500
28,400
40,000
790,000 2,090,000
1,180,000 2,900,000
1,580,000 4,100,000
160
150
130
250
230
210
239/950
239/950K
230/950B 230/950BK
240/950B 240/950BK30
1000
1,320
1,420
1,420
236
308
412
7.5
7.5
7.5
8,600
12,400
16,000
22,700
30,000
42,000
875,000 2,310,000
1,260,000 3,050,000
1,640,000 4,250,000
150
140
120
230
220
190
239/1000 239/1000K
230/1000B 230/1000BK
240/1000B 240/1000BK30
1060
1,400
1,500
1,500
250
325
438
7.5
9.5
9.5
9,300
13,600
17,800
24,700
33,500
47,000
950,000 2,520,000
1,390,000 3,400,000
1,810,000 4,800,000
140
130
120
210
200
180
239/1060 239/1060K
230/1060B 230/1060BK
240/1060B 240/1060BK30
B-248
ra
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
For values of e
Y1
Y2 and Yo
ra
Da
da
Abutment and
fillet dimensions
Constant
Axial load factors
da
mm
Da
ras
min
max
max
Y1
Y2
738
746
746
754
754
764
922
994
994
1,106
1,106
1,226
5
6
6
8
8
10
0.18
0.22
0.29
0.29
0.37
0.35
3.85
3.02
2.36
2.32
1.80
1.91
778
786
786
794
814
972
1,054
1,054
1,176
1,296
5
6
6
8
12
0.17
0.21
0.29
0.29
0.35
828
836
836
844
1,032
1,114
1,114
1,236
5
6
6
8
878
886
886
904
1,092
1,184
1,184
1,306
928
936
936
954
Mass (approx.)
kg
Yo
cylindrical
bore
tapered
bore
5.73
4.50
3.51
3.45
2.69
2.84
3.76
2.96
2.31
2.27
1.76
1.87
375
663
884
1,420
1,800
2,540
363
640
870
1,380
1,770
2,470
3.90
3.20
2.35
2.32
1.92
5.81
4.76
3.49
3.45
2.86
3.81
3.13
2.29
2.27
1.88
412
790
1,060
1,700
3,050
399
763
1,040
1,650
2,960
0.17
0.21
0.28
0.29
4.05
3.15
2.41
2.32
6.04
4.69
3.59
3.45
3.96
3.08
2.36
2.27
487
890
1,190
1,890
471
859
1,170
1,830
5
6
6
10
0.16
0.20
0.28
0.28
4.25
3.32
2.42
2.37
6.32
4.95
3.61
3.54
4.15
3.25
2.37
2.32
550
1,050
1,410
2,270
532
1,010
1,390
2,200
1,152
1,244
1,244
1,366
5
6
6
10
0.16
0.20
0.27
0.28
4.32
3.32
2.48
2.42
6.44
4.95
3.70
3.60
4.23
3.25
2.43
2.36
623
1,170
1,570
2,500
603
1,130
1,540
2,420
986
986
986
1,214
1,324
1,324
6
6
6
0.16
0.21
0.28
4.20
3.26
2.39
6.26
4.85
3.56
4.11
3.18
2.34
774
1,430
1,970
749
1,380
1,940
1,036
1,036
1,036
1,284
1,384
1,384
6
6
6
0.16
0.20
0.27
4.21
3.37
2.51
6.26
5.02
3.73
4.11
3.29
2.45
916
1,580
2,110
887
1,520
2,080
1,096
1,104
1,104
1,364
1,456
1,456
6
8
8
0.16
0.20
0.27
4.28
3.36
2.49
6.37
5.00
3.71
4.19
3.28
2.44
1,090
1,850
2,450
1,060
1,790
2,140
B-249
B
r
r
Cylindrical bore
Tapered bore
taper 1:12
d 11201400mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
d
kN
B
rs min
Limiting speeds
kgf
Cr
Cor
Bearing numbers
static
Cr
rpm
Cor
grease
oil
cylindrical
bore
tapered
bore
1120
1,460
1,580
1,580
250
345
462
7.5
9.5
9.5
9,850
15,600
19,500
26,700
39,000
52,500
1,000,000 2,720,000
1,590,000 4,000,000
1,990,000 5,350,000
130
120
110
200
190
160
239/1120 239/1120K
230/1120B 230/1120BK
240/1120B 240/1120BK30
1180
1,540
272
7.5
11,000
29,800
1,120,000 3,050,000
120
180
239/1180
239/1180K
1250
1,630
280
7.5
12,100
33,500
1,230,000 3,400,000
110
160
239/1250
239/1250K
1320
1,720
300
7.5
13,600
38,000
1,390,000 3,900,000
95
150
239/1320
239/1320K
1400
1,820
315
9.5
15,100
43,000
1,540,000 4,400,000
86
130
239/1400
239/1400K
B-250
ra
dynamic
PrXFrYFa
Fa
Fa
e
e
Fr
Fr
X Y
X
Y
1 Y1 0.67 Y2
static
PorFrYo Fa
For values of e
Y1
Y2 and Yo
ra
Da
da
Abutment and
fillet dimensions
Constant
Axial load factors
da
mm
Da
ras
min
max
max
Y1
Y2
1,156
1,164
1,164
1,424
1,536
1,536
6
8
8
0.15
0.21
0.27
4.42
3.29
2.50
1,216
1,504
0.15
1,286
1,594
1,356
1,684
1,444
1,776
Mass (approx.)
kg
Yo
cylindrical
bore
tapered
bore
6.58
4.80
3.72
4.32
3.21
2.44
1,140
2,160
2,890
1,100
2,090
2,840
4.40
6.55
4.30
1,390
1,340
0.15
4.42
6.58
4.32
1,600
1,550
0.16
4.34
6.46
4.24
1,900
1,840
0.15
4.39
6.54
4.29
2,230
2,160
B-251
Adapter
(For spherical roller bearings)
d1 3570mm
Boundary dimensions
Bearing numbers
mm
d1
B1
Mass
mm
d2
B2
da
db
Ba
min
max
min
kg
Da
min
35
40
45
50
55
60
65
1 Indicates adapter mass.

Note: 1. Please refer to page B-232 to B-235 for bearing dimensions, rated loads, allowable rotations, and mass.
2. Please refer to page D-2 to D-10 and D-12 to D-14 for adapter locknut and washer dimensions.
3. Adapter numbers with the suffix "X" signify narrow slit type adapters, and use washers with straight inner tabs.
B-252
ras
max
max
(approx.)
Adapter
B2
ra
Ba
B1
d1 d2
db da
Da
d1 75115mm
Boundary dimensions
Bearing numbers
mm
Mass
mm
kg
da
db
Ba
min
max
min
min
max
max
(approx.)
100.5
100.5
110
110
12
12
6
6
135
140
140
166
166
2
2
2.5
2.5
1.18
1.18
1.18
1.45
107.5
107.5
110
116
117
10
10
18
6
6
144
150
150
150
176
176
2
2
2
2.5
2.5
1.37
1.37
1.69
1.37
1.69
117
123
123
9
7
7
158
186
186
2
2.5
2.5
1.56
1.56
1.92
107
110
107
110
123
122
130
129
8
19
7
7
168
168
201
201
2
2
2.5
2.5
1.69
2.15
1.69
2.15
23122BK;H3122X
22222BK;H 322X
23222BK;H2322X
21322K ;H 322X
22322BK;H2322X
117
117
121
117
121
127
137
135
142
142
7
6
17
9
7
170
188
188
226
226
2
2
2
2.5
2.5
2.25
2.18
2.74
2.18
2.74
22
22
22
22
22
23024BK;H3024X
23124BK;H3124X
22224BK;H3124X
23224BK;H2324X
22324BK;H2324X
127
128
128
131
131
136
140
150
147
154
7
7
11
17
7
170
190
203
203
246
2
2
2
2
2.5
1.93
2.64
2.64
3.19
3.19
23
23
23
23
23026BK;H3026
23126BK;H3126
22226BK;H3126
23226BK;H2326
137
138
138
142
147
152
161
160
8
8
8
21
190
200
216
216
2
2
2.5
2.5
2.85
3.66
3.66
4.6
d1
B1
d2
B2
75
63
63
63
82
110
110
110
110
18
18
18
18
22217EK;H 317X
22217BK;H 317X
21317K ;H 317X
22317BK;H2317X
91
91
91
94
80
65
65
86
65
86
120
120
120
120
120
18
18
18
18
18
22218EK;H 318X
22218BK;H 318X
23218BK;H2318X
21318K ;H 318X
22318BK;H2318X
96
96
99
96
99
85
68
68
90
125
125
125
19
19
19
22219BK;H 319X
21319K ;H 319X
22319BK;H2319X
102
102
105
90
71
97
71
97
130
130
130
130
20
20
20
20
22220BK;H 320X
23220BK;H2320X
21320K ;H 320X
22320BK;H2320X
100
81
77
105
77
105
145
145
145
145
145
21
21
21
21
21
110
72
88
88
112
112
145
155
155
155
155
115
80
92
92
121
155
165
165
165
Da

3. Adapter numbers with the suffix "X" signify narrow slit type adapters, and use washers with straight inner tabs.
B-253
ras
Adapter
B2
ra
Ba
B1
d1 d2
db da
Da
d1 115170mm
Boundary dimensions
Bearing numbers
mm
Mass
mm
kg
da
db
Ba
Da
ras
min
max
min
max
max
(approx.)
22326BK;H2326
142
167
262
4.6
24
24
24
24
24
23028BK;H3028
23128BK;H3128
22228BK;H3128
23228BK;H2328
22328BK;H2328
147
149
149
152
152
158
165
173
172
179
8
8
8
22
8
200
213
236
236
282
2
2
2.5
2.5
3
3.16
4.34
4.34
5.55
5.55
180
195
195
195
195
26
26
26
26
26
23030BK;H3030
23130BK;H3130
22230BK;H3130
23230BK;H2330
22330BK;H2330
158
160
160
163
163
170
178
188
185
192
8
8
15
20
8
213
238
256
256
302
2
2
2.5
2.5
3
3.89
5.52
5.52
6.63
6.63
140
93
119
119
147
147
190
210
210
210
210
28
28
28
28
28
23032BK;H3032
23132BK;H3132
22232BK;H3132
23232BK;H2332
22332BK;H2332
168
170
170
174
174
181
190
200
198
205
8
8
14
18
8
228
258
276
276
322
2
2
2.5
2.5
3
5.21
7.67
7.67
9.14
9.14
150
101
122
122
154
154
200
220
220
220
220
29
29
29
29
29
23034BK;H3034
23134BK;H3134
22234BK;H3134
23234BK;H2334
22334BK;H2334
179
180
180
185
185
193
202
212
218
218
8
8
10
18
8
248
268
292
292
342
2
2
3
3
3
5.99
8.38
8.38
10.2
10.2
160
109
131
131
161
161
210
230
230
230
230
30
30
30
30
30
23036BK;H3036
23136BK;H3136
22236BK;H3136
23236BK;H2336
22336BK;H2336
189
191
191
195
195
204
215
225
223
230
8
8
18
22
8
268
286
302
302
362
2
2.5
3
3
3
6.83
9.5
9.5
11.3
11.3
170
112
141
141
169
169
220
240
240
240
240
31
31
31
31
31
23038BK;H3038
23138BK;H3138
22238BK;H3138
23238BK;H2338
22338BK;H2338
199
202
202
206
206
215
228
238
236
243
9
9
21
21
9
278
306
322
322
378
2
2.5
3
3
4
7.45
10.8
10.8
12.6
12.6
d1
B1
d2
B2
115
121
165
23
125
82
97
97
131
131
165
180
180
180
180
135
87
111
111
139
139

B-254
Adapter
B3
B2
ra
Ba
B1
B1
d1 d2
d1 d2
d1180mm
ra
Ba
db da
Da
db da
Da
d1200mm
d1 180300mm
Boundary dimensions
Bearing numbers
Mass
mm
kg
mm
da
db
Ba
Da
ras
min
max
min
max
max
(approx.)
23040BK;H3040
23140BK;H3140
22240BK;H3140
23240BK;H2340
22340BK;H2340
210
212
212
216
216
227
240
250
248
255
10
10
24
20
10
298
326
342
342
398
2
2.5
3
3
4
9.19
12.1
12.1
13.9
13.9
41
44
44
44
44
23044BK;H3044
23144BK;H3144
22244BK;H3144
23244BK;H2344
22344BK;H2344
231
233
233
236
236
250
264
274
271
278
12
10
22
11
10
326
352
382
382
438
2.5
3
3
3
4
10.2
14.7
14.7
16.7
16.7
46
46
46
46
46
23048BK;H3048
23148BK;H3148
22248BK;H3148
23248BK;H2348
22348BK;H2348
251
254
254
257
257
272
288
298
295
302
11
11
19
6
11
346
382
422
422
478
2.5
3
3
3
4
13.2
17.3
17.3
19.7
19.7
310
330
330
330
330
46
49
49
49
49
23052BK;H3052
23152BK;H3152
22252BK;H3152
23252BK;H2352
22352BK;H2352
272
276
276
278
278
295
313
323
319
326
13
11
25
2
11
382
422
458
458
512
3
3
4
4
5
15.1
22
22
24.2
24.2
260
152
192
192
221
221
330
350
350
350
350
50
51
51
51
51
23056BK;H3056
23156BK;H3156
22256BK;H3156
23256BK;H2356
22356BK;H2356
292
296
296
299
299
317
336
346
343
350
12
12
28
11
12
402
438
478
478
552
3
4
4
4
5
17.7
24.5
24.5
27.8
27.8
280
168
208
208
240
360
380
380
380
54
53
53
53
23060BK;H3060
23160BK;H3160
22260BK;H3160
23260BK;H3260
313
317
317
321
340
361
371
368
12
12
32
12
442
478
518
518
3
4
4
4
22.8
30.2
30.2
34.1
300
171
226
226
380
400
400
55
56
56
23064BK;H3064
23164BK;H3164
22264BK;H3164
334
339
339
363
384
394
13
13
39
462
518
558
3
4
4
24.6
34.9
34.9
d1
B1
d2
B2
B3
180
120
150
150
176
176
240
250
250
250
250
32
32
32
32
32
200
126
158
158
183
183
260
280
280
280
280
220
133
169
169
196
196
290
300
300
300
300
240
145
187
187
208
208

B-255
Adapter
B3
ra
Ba
B1
db da
d1 d2
Da
d1 300470mm
Boundary dimensions
Bearing numbers
Mass
mm
kg
mm
da
db
Ba
Da
ras
min
max
min
max
max
(approx.)
23264BK;H3264
343
393
13
558
39.3
58
72
72
23068BK;H3068
23168BK;H3168
23268BK;H3268
355
360
364
386
409
421
14
14
14
498
558
592
4
4
5
28.7
49.5
54.6
420
460
460
58
75
75
23072BK;H3072
23172BK;H3172
23272BK;H3272
375
380
385
408
432
442
14
14
14
518
578
622
4
4
5
30.5
54.2
60.2
193
264
310
450
490
490
62
77
77
23076BK;H3076
23176BK;H3176
23276BK;H3276
396
401
405
431
456
465
15
15
15
538
598
652
4
4
5
35.8
61.7
69.6
380
210
272
328
470
520
520
66
82
82
23080BK;H3080
23180BK;H3180
23280BK;H3280
417
421
427
454
479
488
15
15
15
578
622
692
4
5
5
41.3
70.6
81
400
212
304
352
490
540
540
66
90
90
23084BK;H3084
23184BK;H3184
23284BK;H3284
437
443
448
476
504
515
16
16
16
598
672
724
4
5
6
43.7
84.2
94
410
228
307
361
520
560
560
77
90
90
23088BK;H3088
23188BK;H3188
23288BK;H3288
458
464
469
499
527
539
17
17
17
622
692
754
5
5
6
65.2
104
118
430
234
326
382
540
580
580
77
95
95
23092BK;H3092
23192BK;H3192
23292BK;H3292
478
485
491
521
551
563
17
17
17
652
724
794
5
6
6
69.5
116
132
450
237
335
397
560
620
620
77
95
95
23096BK;H3096
23196BK;H3196
23296BK;H3296
499
505
512
544
575
590
18
18
18
672
754
834
5
6
6
73.3
133
152
470
247
356
428
580
630
630
85
100
100
230/500BK;H30/500
231/500BK;H31/500
232/500BK;H32/500
519
527
534
566
600
618
18
18
18
692
794
884
5
6
6
81.8
143
166
d1
B1
d2
B3
300
258
400
56
320
187
254
288
400
440
440
340
188
259
299
360

B-256
Boundary dimensions
Bearing numbers
Mass
Appro-
Withdrawal Sleeves
G1
ra
B3
d1
da
Da
B4
d1 75115mm
Boundary dimensions
Bearing numbers
mm
1
Mass
mm
G1
da
d1
B3
B4
75
M902
M902
M902
M902
48
48
48
71
8
8
8
12
52
52
52
75
22216EK
22216BK
21316K
22316BK
80
M952
M952
M952
M952
52
52
52
74
9
9
9
13
56
56
56
78
85
M1002
M1002
M1002
M1002
M1002
53
53
63
53
79
9
9
10
9
14
90
M1052
M1052
M1052
57
57
85
95
M1102
M1102
M1102
M1102
kg
Da
min
max
; AH
316
; AH
316
; AH
316
; AHX 2316
90
90
92
92
94.5
22217EK
22217BK
21317K
22317BK
; AHX 317
; AHX 317
; AHX 317
; AHX 2317
95
95
99
99
57
57
67
57
83
22218EK
22218BK
23218BK
21318K
22318BK
; AHX 318
; AHX 318
; AHX 3218
; AHX 318
; AHX 2318
10
10
16
61
61
89
22219BK
21319K
22319BK
59
73
59
90
10
11
10
16
63
77
63
94
22220BK
23220BK
21320K
22320BK
105
M1202
M1152
M1202
M1252
M1202
M1252
68
82
68
82
63
98
11
13
11
11
12
16
115
M1302
M1252
M1252
M1302
60
73
73
75
13
13
13
12
min
Appropriate
nut no.
ras
max
max
(approx.)
125.5
130
130
158
158
2
2
2
2
0.365
0.365
0.365
0.597
AN18
AN18
AN18
AN18
100.5
135
140
140
166
166
2
2
2.5
2.5
0.429
0.429
0.429
0.67
AN19
AN19
AN19
AN19
100
100
100
104
104
107.5
144
150
150
150
176
176
2
2
2
2.5
2.5
0.461
0.461
0.576
0.461
0.779
AN20
AN20
AN20
AN20
AN20
; AHX 319
; AHX 319
; AHX 2319
107
109
109
158
186
186
2
2.5
2.5
0.532
0.532
0.886
AN21
AN21
AN21
; AHX 320
; AHX 3220
; AHX 320
; AHX 2320
112
112
114
114
168
168
201
201
2
2
2.5
2.5
0.582
0.767
0.582
0.998
AN22
AN22
AN22
AN22
72
91
72
86
67
102
23122BK ; AHX 3122

24122BK30 ; AH 24122
22222BK ; AHX 3122
23222BK ; AHX 3222
21322K
; AHX 322
22322BK ; AHX 2322
120
120
122
122
124
124
170
170
188
188
226
226
2
2
2
2
2.5
2.5
0.76
0.73
0.76
1.04
0.663
1.35
AN24
AN23
AN24
AN25
AN24
AN25
64
82
82
79
23024BK ; AHX 3024

24024BK30 ; AH 24024
24024CK30; AH 24024
23124BK ; AHX 3124
130
130
130
130
170
170
170
190
2
2
2
2
0.75
0.65
0.65
0.95
AN26
AN25
AN25
AN26
1 Standard thread shapes and dimensions are as per JIS B0207 (metric thread).
2 Indicates reference dimensions before attachment of withdrawal sleeve.
3 Indicates withdrawal sleeve mass.
4 Indicates number of nut to be used at time of disassembly. See pages D-2 to D-10 for nut dimensions.
Note: 1. Please refer to page B-234, B-237 for bearing dimensions, rated loads, allowable rotations, and mass.
B-258
Withdrawal Sleeves
G1
ra
B3
d1
da
Da
B4
d1 115150mm
Boundary dimensions
Bearing numbers
Mass
mm
Da
kg
da
ras
min
max
max
(approx.)
mm
d1
Appropriate
nut no.
B3
G1
B4
115
M1302
M1302
M1352
M1352
93
75
90
105
13
12
13
17
102
79
94
109
24124BK30
22224BK
23224BK
22324BK
;AH 24124
;AHX 3124
;AHX 3224
;AHX 2324
130
132
132
134
190
203
203
246
2
2
2
2.5
1
0.95
1.3
1.6
AN26
AN26
AN27
AN27
125
M1402
M1352
M1352
M1402
M1402
M1402
M1452
M1452
67
83
83
78
94
78
98
115
14
14
14
12
14
12
15
19
71
93
93
82
104
82
102
119
23026BK ;AHX 3026

24026BK30 ;AH 24026
24026CK30 ;AH 24026
23126BK ;AHX 3126
24126BK30 ;AH 24126
22226BK ;AHX 3126
23226BK ;AHX 3226
22326BK ;AHX 2326
140
140
140
140
140
144
144
148
190
190
190
200
200
216
216
262
2
2
2
2
2
2.5
2.5
3
0.93
0.84
0.84
1.08
1.11
1.08
1.58
1.97
AN28
AN27
AN27
AN28
AN28
AN28
AN29
AN29
135
M1502
M1452
M1452
M1502
M1502
M1502
M1553
M1553
68
83
83
83
99
83
104
125
14
14
14
14
14
14
15
20
73
93
93
88
109
88
109
130
23028BK ;AHX 3028

24028BK30 ;AH 24028
24028CK30 ;AH 24028
23128BK ;AHX 3128
24128BK30 ;AH 24128
22228BK ;AHX 3128
23228BK ;AHX 3228
22328BK ;AHX 2328
150
150
150
152
152
154
154
158
200
200
200
213
213
236
236
282
2
2
2
2
2
2.5
2.5
3
1.01
0.91
0.91
1.28
1.25
1.28
1.84
2.33
AN30
AN29
AN29
AN30
AN30
AN30
AN31
AN31
145
M1603
M1553
M1553
M1653
M1603
M1653
M1653
M1653
72
90
90
96
115
96
114
135
15
15
15
15
15
15
17
24
77
101
101
101
126
101
119
140
23030BK ;AHX 3030

24030BK30 ;AH 24030
24030CK30 ;AH 24030
23130BK ;AHX 3130
24130BK30 ;AH 24130
22230BK ;AHX 3130
23230BK ;AHX 3230
22330BK ;AHX 2330
162
162
162
162
162
164
164
168
213
213
213
238
238
256
256
302
2
2
2
2
2
2.5
2.5
3
1.15
1.04
1.04
1.79
1.56
1.79
2.22
2.82
AN32
AN31
AN31
AN33
AN32
AN33
AN33
AN33
150
M1703
M1703
M1703
M1803
77
95
95
103
16
15
15
16
82
106
106
108
23032BK ;AH 3032

24032BK30 ;AH 24032
24032CK30 ;AH 24032
23132BK ;AH 3132
172
172
172
172
228
228
228
258
2
2
2
2
2.06
2.33
2.33
3.21
AN34
AN34
AN34
AN36
B-259
Withdrawal Sleeves
G1
ra
B3
d1
da
Da
B4
d1 150190mm
Boundary dimensions
Bearing numbers
Mass
mm
Da
kg
da
ras
min
max
max
(approx.)
mm
d1
Appropriate
nut no.
B3
G1
B4
150
M1703
M1803
M1803
M1803
124
103
124
140
15
16
20
24
135
108
130
146
24132BK30
22232BK
23232BK
22332BK
;AH 24132
;AH 3132
;AH 3232
;AH 2332
172
174
174
178
258
276
276
322
2
2.5
2.5
3
3
3.21
4.08
4.72
AN34
AN36
AN36
AN36
160
M1803
M1803
M1803
M1903
M1803
M1903
M1903
M1903
85
106
106
104
125
104
134
146
17
16
16
16
16
16
24
24
90
117
117
109
136
109
140
152
23034BK ;AH 3034

24034BK30 ;AH 24034
24034CK30 ;AH 24034
23134BK ;AH 3134
24134BK30 ;AH 24134
22234BK ;AH 3134
23234BK ;AH 3234
22334BK ;AH 2334
182
182
182
182
182
188
188
188
248
248
248
268
268
292
292
342
2
2
2
2
2
3
3
3
2.43
2.8
2.8
3.4
3.21
3.4
4.8
5.25
AN36
AN36
AN36
AN38
AN36
AN38
AN38
AN38
170
M1903
M1903
M1903
M2003
M1903
M2003
M2003
M2003
92
116
116
116
134
105
140
154
17
16
16
19
16
17
24
26
98
127
127
122
145
110
146
160
23036BK ;AH 3036

24036BK30 ;AH 24036
24036CK30 ;AH 24036
23136BK ;AH 3136
24136BK30 ;AH 24136
22236BK ;AH 2236
23236BK ;AH 3236
22336BK ;AH 2336
192
192
192
194
194
198
198
198
268
268
268
286
286
302
302
362
2
2
2
2.5
2.5
3
3
3
2.81
3.1
3.1
4.22
3.68
3.73
5.32
5.83
AN38
AN38
AN38
AN40
AN38
AN40
AN40
AN40
180
Tr2054
M2003
M2003
Tr2104
M2003
Tr2104
Tr2104
Tr2104
96
118
118
125
146
112
145
160
18
18
18
20
18
18
25
26
102
131
131
131
159
117
152
167
23038BK ;AH 3038

24038BK30 ;AH 24038
24038CK30 ;AH 24038
23138BK ;AH 3138
24138BK30 ;AH 24138
22238BK ;AH 2238
23238BK ;AH 3238
22338BK ;AH 2338
202
202
202
204
204
208
208
212
278
278
278
306
306
322
322
378
2
2
2
2.5
2.5
3
3
4
3.32
3.5
3.5
4.89
4.28
4.25
5.9
6.63
HNL41
AN40
AN40
HN42
AN40
HN42
HN42
HN42
190
Tr2154
Tr2104
Tr2204
Tr2104
102
127
134
158
19
18
21
18
108
140
140
171
23040BK
24040BK30
23140BK
24140BK30
212
212
214
214
298
298
326
326
2
2
2.5
2.5
3.8
3.93
5.49
5.1
HNL43
HN42
HN44
HN42
;AH 3040
;AH 24040
;AH 3140
;AH 24140
B-260
Withdrawal Sleeves
G1
ra
B3
d1
da
Da
B4
d1 190260mm
Boundary dimensions
Bearing numbers
d1
B3
G1
B4
Appropriate
nut no.
mm
Da
kg
da
ras
min
max
max
(approx.)
218
218
222
342
342
398
3
3
4
4.68
6.68
7.54
HN44
HN44
HN44
190
Tr2204
Tr2204
Tr2204
118
153
170
19
25
30
123
160
177
22240BK
23240BK
22340BK
;AH
;AH
;AH
200
Tr2354
Tr2304
Tr2404
Tr2304
Tr2404
Tr2404
Tr2404
111
138
145
170
130
181
181
20
20
23
20
20
30
30
117
152
151
184
136
189
189
23044BK
24044BK30
23144BK
24144BK30
22244BK
23244BK
22344BK
;AH 3044
;AH 24044H
;AH 3144
;AH 24144H
;AH 2244
;AH 2344
;AH 2344
234
234
238
238
238
238
242
326
326
352
352
382
382
438
2.5
2.5
3
3
3
3
4
7.4
8.25
10.4
10.2
9.1
13.5
13.5
HNL47
HN46
HN48
HN46
HN48
HN48
HN48
220
Tr2604
Tr2504
Tr2604
Tr2604
Tr2604
Tr2604
Tr2604
116
138
154
180
144
189
189
21
20
25
20
21
30
30
123
153
161
195
150
197
197
23048BK
24048BK30
23148BK
24148BK30
22248BK
23248BK
22348BK
;AH 3048
;AH 24048H
;AH 3148
;AH 24148H
;AH 2248
;AH 2348
;AH 2348
254
254
258
258
258
258
262
346
346
382
382
422
422
478
2.5
2.5
3
3
3
3
4
8.75
8.98
12
12.5
11.1
15.5
15.5
HNL52
HN50
HN52
HN52
HN52
HN52
HN52
240
Tr2804
Tr2704
Tr2904
Tr2804
Tr2904
Tr2904
Tr2904
128
162
172
202
155
205
205
23
22
26
22
23
30
30
135
178
179
218
161
213
213
23052BK
24052BK30
23152BK
24152BK30
22252BK
23252BK
22352BK
;AH 3052
;AH 24052
;AH 3152
;AH 24152H
;AH 2252
;AH 2352
;AH 2352
278
278
278
278
282
282
288
382
382
422
422
458
458
512
3
3
3
3
4
4
5
10.7
11.8
16.2
15.4
14
19.6
19.6
HNL56
HN54
HN58
HN56
HN58
HN58
HN58
Tr3004
Tr2904
Tr3105
Tr3004
Tr3105
Tr3105
Tr3105
131
162
175
202
155
212
212
24
22
28
22
24
30
30
139
179
183
219
163
220
220
23056BK
24056BK30
23156BK
24156BK30
22256BK
23256BK
22356BK
;AH3056
;AH24056H
;AH3156
;AH24156H
;AH2256
;AH2356
;AH2356
298
298
302
302
302
302
308
402
402
438
438
478
478
552
3
3
4
4
4
4
5
12
12.8
17.5
16.3
15.2
21.6
21.6
HNL60
HN58
HN62
HN60
HN62
HN62
HN62
260
2240
3240
2340
Mass
mm
1
2. Withdrawal sleeve numbers appended with the suffix "H" signify high pressure oil (hydraulic) design. (See page B-231)
B-261
Withdrawal Sleeves
G1
ra
B3
d1
da
Da
B4
d1 280400mm
Boundary dimensions
Bearing numbers
Mass
mm
Da
kg
da
ras
min
max
max
mm
d1
Appropriate
nut no.
B3
G1
B4
280
Tr3205
Tr3105
Tr3305
Tr3205
Tr3305
Tr3305
145
184
192
224
170
228
26
24
30
24
26
34
153
202
200
242
178
236
23060BK
24060BK30
23160BK
24160BK30
22260B
23260BK
;AH 3060
;AH 24060H
;AH 3160
;AH 24160H
;AH 2260
;AH 3260
318
318
322
322
322
322
442
442
478
478
518
518
3
3
4
4
4
4
14.4
15.5
20.8
19.5
18.1
26
HNL64
HN62
HN66
HN64
HN66
HN66
300
Tr3455
Tr3305
Tr3505
Tr3405
Tr3505
Tr3505
149
184
209
242
180
246
27
24
31
24
27
36
157
202
217
260
190
254
23064BK
24064BK30
23164BK
24164BK30
22264BK
23264BK
;AH 3064
;AH 24064H
;AH 3164
;AH 24164H
;AH 2264
;AH 3264
338
338
342
342
342
342
462
462
518
518
558
558
3
3
4
4
4
4
16
16.6
24.5
21.4
20.2
30.6
HNL69
HN66
HN70
HN68
HN70
HN70
320
Tr3655
Tr3605
Tr3705
Tr3605
162
206
225
269
28
26
33
26
171
225
234
288
23068BK
24068BK30
23168BK
24168BK30
;AH 3068
;AH 24068H
;AH 3168
;AH 24168H
362
362
362
362
498
498
558
558
4
4
4
4
19.5
21.7
29
27.1
HN73
HNL72
HN74
HN72
340
Tr3855
Tr3805
Tr4005
Tr3805
167
206
229
269
30
26
35
26
176
226
238
289
23072BK
24072BK30
23172BK
24172BK30
;AH 3072
;AH 24072H
;AH 3172
;AH 24172H
382
382
382
382
518
518
578
578
4
4
4
4
21
22.7
33
29.6
HNL77
HNL76
HN80
HN76
360
Tr4105
Tr4005
Tr4205
Tr4005
170
208
232
271
31
28
36
28
180
228
242
291
23076BK
24076BK30
23176BK
24176BK30
;AH 3076
;AH 24076H
;AH 3176
;AH 24176H
402
402
402
402
538
538
598
598
4
4
4
4
23.2
23.7
35.7
31.3
HNL82
HNL80
HN84
HN80
380
Tr4305
Tr4205
Tr4405
Tr4205
183
228
240
278
33
28
38
28
193
248
250
298
23080BK
24080BK30
23180BK
24180BK30
;AH 3080
;AH 24080H
;AH 3180
;AH 24180H
422
422
428
428
578
578
622
622
4
4
5
5
27.3
27.1
39.5
34.4
HNL86
HNL84
HN88
HN84
400
Tr4505
Tr4405
186
230
34
30
196
252
23084BK ;AH 3084

24084BK30 ;AH 24084H
442
442
598
598
4
4
29
29
HNL90
HNL88
(approx.)
B-262
Withdrawal Sleeves
G1
ra
B3
d1
da
Da
B4
d1 400480mm
Boundary dimensions
Bearing numbers
Mass
mm
Da
kg
da
ras
min
max
max
mm
d1
B3
G1
B4
Appropriate
nut no.
(approx.)
400
Tr4605
Tr4405
266
310
40
30
276
332
23184BK
; AH 3184
24184BK30 ; AH 24184H
448
448
672
672
5
5
46.5
40.3
HN92
HN88
420
Tr4705
Tr4605
Tr4805
194
242
270
35
30
42
205
264
281
23088BK
; AHX 3088
24088BK30 ; AH 24088H
23188BK
; AHX 3188
468
468
468
622
622
692
5
5
5
32
31.9
49.8
HNL94
HNL92
HN96
440
Tr4605
Tr4905
Tr4805
Tr5106
Tr4805
310
202
250
285
332
30
37
32
43
32
332
213
273
296
355
24188BK30
23092BK
24092BK30
23192BK
24192BK30
; AH 24188H
; AHX 3092
; AH 24092H
; AHX 3192
; AH 24192H
468
488
488
496
496
692
652
652
724
724
5
5
5
6
6
42.3
35.2
34.7
57.9
47.6
HN92
HNL98
HNL96
HN102
HN96
460
Tr5206
Tr5005
Tr5306
Tr5005
205
250
295
340
38
32
45
32
217
273
307
363
23096BK
24096BK30
23196BK
24196BK30
; AHX 3096
; AH 24096H
; AHX 3196
; AH 24196H
508
508
516
516
672
672
754
754
5
5
6
6
39.2
36.6
63.1
52.6
HNL104
HNL100
HN106
HN100
480
Tr5406
Tr5306
Tr5506
Tr5306
209
253
313
360
40
35
47
35
221
276
325
383
230/500BK ; AHX 30/500

240/500BK30 ; AH 240/500H
231/500BK ; AHX 31/500
241/500BK30 ; AH 241/500H
528
528
536
536
692
692
794
794
5
5
6
6
42.5
43.9
70.9
59
HNL108
HNL106
HN110
HN106
B-263
Double Row Angular Contact Thrust Ball Bearings

T1
C
r1
r
J d
EW D
d 25120mm
Boundary dimensions
dynamic
mm
d
small dia. large dia.
type
type
T1
rs min
r1s min
Ca
Basic load ratings

static dynamic
static
kN
kgf
Coa
Ca
Coa
Limiting speeds
Bearing numbers
rpm
grease
oil
small dia.
type
large dia.
type
25
27
47
28
14
0.6
0.3
13.2
28.3
1,350
2,890
7,600
10,000
562005
562005M
30
32
55
32
16
0.6
14.0
32.5
1,420
3,350
6,600
8,800
562006
562006M
35
37
62
34
17
0.6
19.7
48.5
2,010
4,950
6,000
8,100
562007
562007M
40
42
68
36
18
0.6
23.8
58.5
2,430
5,950
5,600
7,500
562008
562008M
45
47
75
38
19
0.6
26.0
69.0
2,650
7,000
5,200
6,900
562009
562009M
50
52
80
38
19
0.6
26.8
74.0
2,730
7,550
5,000
6,700
562010
562010M
55
57
90
44
22
1.1
0.6
37.0
99.0
3,800
10,100
4,400
5,900
562011
562011M
60
62
95
44
22
1.1
0.6
37.5
103
3,850
10,500
4,300
5,700
562012
562012M
65
67
100
44
22
1.1
0.6
39.0
111
3,950
11,300
4,200
5,600
562013
562013M
70
73
110
48
24
1.1
0.6
47.5
140
4,850
14,300
3,800
5,100
562014
562014M
75
78
115
48
24
1.1
0.6
49.0
150
5,000
15,300
3,700
4,900
562015
562015M
80
83
125
54
27
1.1
0.6
57.5
178
5,850
18,200
3,300
4,500
562016
562016M
85
88
130
54
27
1.1
0.6
58.0
184
5,950
18,800
3,300
4,400
562017
562017M
90
93
140
60
30
1.5
67.5
216
6,850
22,000
3,000
4,000
562018
562018M
95
98
145
60
30
1.5
68.0
223
6,950
22,700
2,900
3,900
562019
562019M
100
104
103
140
150
48
60
24
30
1.1
1.5
0.6
1
52.0
68.5
179
229
5,300
7,000
18,200
23,400
2,800
2,900
3,700
3,800
562920
562020
562920M
562020M
105
109
109
145
160
48
66
24
33
1.1
2
0.6
1
53.5
78.5
188
266
5,450
8,000
19,200
27,100
2,700
2,600
3,600
3,500
562921
562021
562921M
562021M
110
114
114
150
170
48
72
24
36
1.1
2
0.6
1
54.0
96.0
193
315
5,500
9,750
19,700
32,500
2,700
2,400
3,600
3,300
562922
562022
562922M
562022M
120
124
124
165
180
54
72
27
36
1.1
2
0.6
1
65.0
98.0
242
335
6,600
10,000
24,700
34,500
2,400
2,400
3,200
3,200
562924
562024
562924M
562024M
1 Minimum allowable dimension for chamfer dimension r or r1. 2 Ball's maximum circumscribed circle diameter dimension
Note: 1. For small diameter type, the cylindrical bore or tapered bore is provided on the small diameter of double row cylindrical roller bearing series
NNU49, NN49, and NN30; for large diameter type (marked with "M"), the tapered bore is provided on the large diameter side.
B-274
r1a
ra
Da
Wo
da
do
dynamic
PaFa
static
PoaFa
Oil inlet, oil groove dimensions

Dimensions
mm
Mass (approx.)
mm
2
Nominal outer
diameter
kg
da
Da
ras
r1as
min
max
max
max
small dia.
type
large dia.
type
EW
40
41.3
33
44
0.6
0.3
0.197
0.177
47
48.5
40
50.5
0.6
0.301
0.28
53
55
45.5
57.5
0.6
0.394
0.35
58.5
61
50
63.5
0.6
0.482
0.44
65
67.5
56.5
70.5
0.6
0.605
0.54
70
72.5
61.5
75.5
0.6
0.638
0.59
78
81
67.5
84
0.6
0.988
0.9
83
86.1
72.5
89
0.6
1.06
0.96
88
91
77.5
94
0.6
1.08
97
100
85
104
0.6
1.53
1.4
102
105
90
109
0.6
1.61
1.5
110
113
96.5
119
0.6
2.2
115
118
102
124
0.6
2.31
2.1
123
127
109
133.5
1.5
3.05
2.7
128
132
114
138.5
1.5
3.18
2.9
126
133
129
137
114
119
134.5
143.5
1
1.5
0.6
1
2.04
3.32
1.8
3
131
142
134
146
119
127
139.5
152
1
2
0.6
1
2.12
4.19
1.87
3.7
136
150
139
155
124
133
144.5
162
1
2
0.6
1
2.21
5.35
1.95
4.9
150
160
154.5
165
138
143
159.5
172
1
2
0.6
1
3.06
5.73
2.75
5.2
over up to/incl
Units mm
Oil groove width Wo
Oil inlet do
Bearing series
Bearing series
5629
5629
5620
5620
50
4.5
50
80
80
150
6
8
3
4
Note: 2. The following bearing series can be assembled and used together: 5629 (M) and NNU49 (K) and NN49 (K); 5620 (M) and NN30 (K).
3. These are high precision bearings manufactured at NTN standard Class 5 or higher.
B-275

T1
C
r1
r
J d
EW D
d 130320mm
Boundary dimensions
dynamic
mm
d
small dia. large dia.
type
type
Basic load ratings

static
dynamic
static
kN
kgf
Limiting speeds
Bearing numbers
rpm
T1
rs min
r1s min
Ca
Coa
Ca
Coa
grease
oil
small dia.
type
large dia.
type
130
134
135
180
200
60
84
30
42
1.5
2
1
1
75.0
139
284
460
7,650
14,200
28,900
47,000
2,200
2,100
2,900
2,800
562926
562026
562926M
562026M
140
144
145
190
210
60
84
30
42
1.5
2
1
1
76.0
144
297
495
7,750
14,600
30,500
50,500
2,100
2,000
2,800
2,700
562928
562028
562928M
562028M
150
155
155
210
225
72
90
36
45
2
2.1
1
1.1
107
147
410
525
10,900
15,000
41,500
53,500
1,800
1,900
2,400
2,500
562930
562030
562930M
562030M
160
165
165
220
240
72
96
36
48
2
2.1
1
1.1
109
172
430
620
11,100
17,600
44,000
63,000
1,800
1,700
2,300
2,300
562932
562032
562932M
562032M
170
175
176
230
260
72
108
36
54
2
2.1
1
1.1
111
202
450
735
11,300
20,600
46,000
75,000
1,700
1,600
2,300
2,100
562934
562034
562934M
562034M
180
186
187
250
280
84
120
42
60
2
2.1
1
1.1
156
234
605
865
15,900
23,900
62,000
88,000
1,500
1,400
2,000
1,900
562936
562036
562936M
562036M
190
196
197
260
290
84
120
42
60
2
2.1
1
1.1
157
236
625
890
16,000
24,100
63,500
91,000
1,500
1,400
2,000
1,900
562938
562038
562938M
562038M
200
207
207
280
310
96
132
48
66
2.1
2.1
1.1
1.1
185
271
735
1,030
18,800 75,000
27,700 105,000
1,300
1,300
1,800
1,700
562940
562040
562940M
562040M
220
227
228
300
340
96
144
48
72
2.1
3
1.1
1.1
190
335
795
1,270
19,400 81,000
34,000 129,000
1,300
1,200
1,700
1,500
562944
562044
562944M
562044M
240
247
248
320
360
96
144
48
72
2.1
3
1.1
1.1
196
340
850
1,350
20,000 87,000
35,000 137,000
1,200
1,100
1,600
1,500
562948
562048
562948M
562048M
260
269
269
360
400
120
164
60
82
2.1
4
1.1
1.5
261
405
1,130
1,710
26,600 116,000
41,500 174,000
1,000
980
1,400
1,300
562952
562052
562952M
562052M
280
289
289
380
420
120
164
60
82
2.1
4
1.1
1.5
265
415
1,190
1,810
27,000 121,000
42,500 185,000
980
950
1,300
1,300
562956
562056
562956M
562056M
300
310
310
420
460
144
190
72
95
3
4
1.1
1.5
335
475
1510
2,170
34,500 154,000
48,500 221,000
840
830
1,100
1,100
562960
562060
562960M
562060M
320
330
330
440
480
144
190
72
95
3
4
1.1
1.5
340
480
1,580
2,230
35,000 161,000
49,000 228,000
820
810
1,100
1,100
562964
562064
562964M
562064M
1 Minimum allowable dimension for chamfer dimension r or r1. 2 Ball's maximum circumscribed circle diameter dimension
Note: 1. For small diameter type, the cylindrical bore or tapered bore is provided on the small diameter of double row cylindrical roller bearing series
NNU49, NN49, and NN30; for large diameter type (marked with "M"), the tapered bore is provided on the large diameter side.
B-276
r1a
ra
Da
Wo
da
do
dynamic
PaFa
static
PoaFa
Oil inlet, oil groove dimensions

Dimensions
mm
Mass (approx.)
mm
2
Nominal outer
diameter
kg
da
Da
ras
r1as
min
max
max
max
small dia.
type
D
large dia.
type
EW
163
177
168
182
150
155
173.5
192
1.5
2
1
1
4.11
8.58
3.7
7.6
173
187
178
192
160
165
183.5
202
1.5
2
1
1
4.38
9.1
3.94
8.1
190
200
196.5
206
174
178
202
215
2
2
1
1
6.88
11.2
6.2
10
200
212
206.5
219
184
189
212
230
2
2
1
1
7.26
13.6
6.53
11.9
210
230
216.5
236
194
203
222
250
2
2
1
1
7.64
18.5
6.88
16.5
227
248
234
255
207
219
242
270
2
2
1
1
11.2
24.7
10
21.8
237
258
244
265
217
229
252
280
2
2
1
1
11.7
25.5
10.5
23
252
274
261
282
231
243
270
300
2
2
1
1
16.3
32.7
14.7
29.7
272
304
281
310
251
267
290
330
2
2.5
1
1
17.7
42.8
16
38.5
292
322
301
330
271
287
310
350
2
2.5
1
1
19
45.8
17
41.2
328
354
336
364
299
315
350
388
2
3
1
1.5
32.9
67
29.6
60.3
348
374
356
384
319
335
370
408
2
3
1
1.5
35
71.1
31.5
64
384
406
391
418
349
364
410
448
2.5
3
1
1.5
55
102
49.5
91.8
404
426
411
438
369
384
430
468
2.5
3
1
1.5
58.1
108
52.3
97.2
over up to/incl
Units mm
Oil groove width Wo
Oil inlet do
Bearing series
Bearing series
5629
5620
5629
5620
80
150
150
200
8
8
8
12
4
4
4
6
200
210
210
260
12
12
12
14
6
6
6
6
260
320
320
400
14
16
16
23
6
8
8
12
400
480
22
22
12
12
Note: 2. The following bearing series can be assembled and used together: 5629 (M) and NNU49 (K) and NN49 (K); 5620 (M) and NN30 (K).
3. These are high precision bearings manufactured at NTN standard Class 5 or higher.
B-277
High Speed Duplex Angular Contact Thrust Ball Bearings

r1
2B
r1
r
2a
d 25120mm
Boundary dimensions
dynamic
kN
mm
1
Basic load ratings

static
dynamic
Limiting speeds
static
kgf
Bearing
numbers
rpm
2B
rs min
r1s min
Ca
Coa
Ca
Coa
grease
oil
25
47
21
0.6
0.3
16.2
22.1
1,650
2,260
16,000
21,000
HTA005DB
30
55
24
0.6
17.5
26.7
1,780
2,720
14,000
18,000
HTA006DB
35
62
25.5
0.6
25.2
38.0
2,570
3,900
12,000
16,000
HTA007DB
40
68
27
0.6
27.2
45.0
2,780
4,550
11,000
14,000
HTA008DB
45
75
28.5
0.6
27.9
48.5
2,840
4,950
9,700
13,000
HTA009DB
50
80
28.5
0.6
29.6
55.5
3,000
5,650
8,800
12,000
HTA010DB
55
90
33
1.1
0.6
32.0
64.0
3,250
6,500
8,000
11,000
HTA011DB
60
95
33
1.1
0.6
33.5
69.5
3,400
7,100
7,400
9,800
HTA012DB
65
100
33
1.1
0.6
34.0
72.0
3,450
7,350
6,900
9,200
HTA013DB
70
110
36
1.1
0.6
41.5
91.0
4,250
9,300
6,400
8,500
HTA014DB
75
115
36
1.1
0.6
44.0
101
4,500
10,300
5,900
7,900
HTA015DB
80
125
40.5
1.1
0.6
50.5
117
5,150
11,900
5,600
7,400
HTA016DB
85
130
40.5
1.1
0.6
51.0
120
5,200
12,300
5,200
7,000
HTA017DB
90
140
45
1.5
59.5
141
6,050
14,400
5,000
6,600
HTA018DB
95
145
45
1.5
60.0
146
6,100
14,900
4,700
6,300
HTA019DB
100
140
150
36
45
1.1
1.5
0.6
1
47.0
62.0
121
156
4,800
6,350
12,300
15,900
4,800
4,500
6,300
5,900
HTA920DB
HTA020DB
105
145
160
36
49.5
1.1
2
0.6
1
48.5
71.0
128
181
4,950
7,250
13,000
18,400
4,500
4,200
6,000
5,600
HTA921DB
HTA021DB
110
150
170
36
54
1.1
2
0.6
1
49.0
88.5
131
222
5,000
9,000
13,400
22,700
4,300
4,000
5,800
5,400
HTA922DB
HTA022DB
120
165
180
40.5
54
1.1
2
0.6
1
57.0
89.0
156
228
5,800
9,050
15,900
23,300
4,000
3,700
5,300
4,900
HTA924DB
HTA024DB

Note: 1. This bearing can be used in place of high speed double row angular contact thrust ball bearings. 2. These are high precision bearings
manufactured at NTN standard Class 5 or higher.
B-278
r1a
ra
Da
da
Load
center
Mass
mm
mm
kg
da
Da
ras
r1as
min
max
max
max
2a
(approx.)
31
43.5
0.6
0.3
40.5
0.138
37.5
49
0.5
47.5
0.22
42.5
56
0.5
53.5
0.274
47.5
62
0.5
59
0.342
52.5
69
0.5
64.5
0.438
57.5
74
0.5
69
0.476
65
84
0.6
77.5
0.754
70
89
0.6
81.5
0.808
75
94
0.6
85.5
0.858
80
104
0.6
93.5
1.19
85
109
0.6
97.5
1.26
90
119
0.6
106
1.73
95
124
0.6
110
1.82
102
132.5
1.5
0.8
119
2.4
107
137.5
1.5
0.8
123
2.52
110
112
134
142.5
1
1.5
0.6
0.8
119
127
1.6
2.62
115
119
139
152.5
1
2
0.6
1
123
136
1.66
3.38
120
124
144
162.5
1
2
0.6
1
127
144
1.72
4.22
130
134
159
172.5
1
2
0.6
1
140
153
2.4
4.5
B-279

r1
2B
r1
r
2a
d 130320mm
Boundary dimensions
dynamic
kN
mm
1
Basic load ratings

static
dynamic
Limiting speeds
static
kgf
Bearing
numbers
rpm
grease
oil
19,600
33,000
3,600
3,400
4,800
4,500
HTA926DB
HTA026DB
6,950
13,500
20,100
35,500
3,300
3,100
4,500
4,200
HTA928DB
HTA028DB
270
370
9,750
13,800
27,600
37,500
3,100
2,900
4,200
3,900
HTA930DB
HTA030DB
97.5
159
284
435
9,950
16,200
29,000
44,000
2,900
2,700
3,900
3,600
HTA932DB
HTA032DB
1
1.1
99.5
182
298
500
10,100
18,600
30,500
51,000
2,700
2,500
3,600
3,400
HTA934DB
HTA034DB
2
2.1
1
1.1
150
211
445
585
15,300
21,500
45,500
60,000
2,600
2,400
3,400
3,200
HTA936DB
HTA036DB
63
90
2
2.1
1
1.1
153
214
470
605
15,600
21,800
48,000
61,500
2,400
2,200
3,200
3,000
HTA938DB
HTA038DB
280
310
72
99
2.1
2.1
1.1
1.1
180
240
555
680
18,400
24,400
56,500
69,000
2,300
2,100
3,000
2,800
HTA940DB
HTA040DB
220
300
340
72
108
2.1
3
1.1
1.1
185
300
595
860
18,900
30,500
60,500
87,500
2,100
1,900
2,700
2,600
HTA944DB
HTA044DB
240
320
360
72
108
2.1
3
1.1
1.1
190
310
635
915
19,400
31,500
64,500
93,000
1,900
1,700
2,500
2,300
HTA948DB
HTA048DB
260
360
400
90
123
2.1
4
1.1
1.5
250
365
830
1,160
25,400
37,500
84,500
118,000
1,700
1,600
2,300
2,100
HTA952DB
HTA052DB
280
380
420
90
123
2.1
4
1.1
1.5
257
375
885
1,230
26,200
38,500
90,500
125,000
1,600
1,500
2,100
2,000
HTA956DB
HTA056DB
300
420
460
108
142.5
3
4
1.1
1.5
325
430
1,130
1,470
33,500
44,000
115,000
150,000
1,400
1,400
1,900
1,800
HTA960DB
HTA060DB
320
440
480
108
142.5
3
4
1.1
1.5
330
435
1,180
1,520
34,000
44,000
120,000
155,000
1,300
1,300
1,800
1,700
HTA964DB
HTA064DB
2B
rs min
r1s min
130
180
200
45
63
1.5
2
140
190
210
45
63
150
210
225
160
Ca
Coa
1
1
68.0
128
193
325
6,950
13,000
1.5
2
1
1
68.0
132
197
345
54
67.5
2
2.1
1
1.1
95.5
136
220
240
54
72
2
2.1
1
1.1
170
230
260
54
81
2
2.1
180
250
280
63
90
190
260
290
200
Ca
Coa

Note: 1. This bearing can be used in place of high speed double row angular contact thrust ball bearings. 2. These are high precision bearings
manufactured at NTN standard Class 5 or higher.
B-280
r1a
ra
Da
da
Load
center
Mass
mm
mm
kg
2a
(approx.)
da
Da
ras
r1as
min
max
max
max
142
144
172.5
192.5
1.5
2
0.8
1
153
170
3.26
6.66
152
154
182.5
202.5
1.5
2
1
1
161
178
3.46
7.08
164
167
202.5
215
2
2
1
1
178
191
5.4
8.82
174
177
212.5
230
2
2
1
1
186
204
5.7
10.6
184
187
222.5
250
2
2
1
1
195
221
6
14.5
194
197
242.5
270
2
2
1
1
212
238
9.38
20.6
204
207
252.5
280
2
2
1
1
220
246
9.82
21.4
217
217
270
300
2
2
1
1
237
263
13.7
27.4
237
240
290
330
2
2.5
1
1
254
289
14.8
35.8
257
260
310
350
2
2.5
1
1
271
306
16
38.2
277
283
350
388
2
3
1
1.5
305
338
27.8
56.2
297
303
370
408
2
3
1
1.5
322
355
28
59.6
320
323
410
448
2.5
3
1
1.5
356
390
46.6
85.6
340
343
430
468
2.5
3
1
1.5
373
407
49
90
B-281
Self-Aligning Roller Thrust Bearings
d1
d
B1
r
T
C
r
D1
D
d 60160mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
1
static
kgf
Coa
1.5
283
805
28,900
82,000
2,600
45
330
945
33,500
96,500
150
48
365
1,040
37,000
75
160
51
415
1,190
80
170
54
2.1
460
85
150
180
39
58
1.5
2.1
90
155
190
39
60
100
170
210
110
Dimensions
mm
D1
d1
B1
29412
89
123
15
20
38
2,400
29413
96
133
16
21
42
106,000
2,200
29414
103
142
17
23
44
42,500
122,000
2,100
29415
109
152
18
24
47
1,380
47,000
141,000
1,900
29416
117
162
19
26
50
265
490
820
1,480
27,000
50,000
84,000
151,000
2,300
1,800
29317
29417
114
125
143.5
170
13
21
19
28
50
54
1.5
2.1
285
545
915
1,680
29,100
56,000
93,500
172,000
2,300
1,700
29318
29418
117
132
148.5
180
13
22
19
29
52
56
42
67
1.5
3
345
685
1,160
2130
35,500
69,500
118,000
217,000
2,100
1,500
29320
29420
129
146
163
200
14
24
20.8
32
58
62
190
230
48
73
2
3
445
845
1,500
2,620
45,000
86,500
152,000
267,000
1,800
1,400
29322
29422
143
162
182
220
16
26
23
35
64
69
120
210
250
54
78
2.1
4
535
975
1,770
3,050
54,500
99,000
181,000
310,000
1,600
1,300
29324
29424
159
174
200
236
18
29
26
37
70
74
130
225
270
58
85
2.1
4
615
1,080
2,100
3,550
62,500
110,000
215,000
360,000
1,500
1,200
29326
29426
171
189
215
255
19
31
28
41
76
81
140
240
280
60
85
2.1
4
685
1,110
2,360
3,750
70,000
114,000
241,000
385,000
1,400
1,200
29328
29428
183
199
230
268
20
31
29
41
82
86
150
215
250
300
39
60
90
1.5
2.1
4
340
675
1,280
1,340
2,390
4,350
34,500
68,500
131,000
136,000
243,000
445,000
1,800
1,400
1,100
29230
29330
29430
178
194
214
208
240
285
14
20
32
19
29
44
82
87
92
160
225
270
320
39
67
95
1.5
3
5
360
820
1,500
1,460
2,860
5,150
36,500
84,000
153,000
149,000
292,000
525,000
1,700
1,300
1,000
29232
29332
29432
188
208
229
219
260
306
14
24
34
19
32
45
86
92
99
rs min
60
130
42
65
140
70
Coa
Bearing
numbers
oil
Ca
Ca
Limiting
speeds
rpm
B-282
da
ra
ra

dynamic
PaFa1.2Fr
static
PoaFa2.7Fr
Fr
when
0.55
Fa
Da
Abutment and
fillet dimensions
Mass
da
mm
Da
ras
kg
min
max
max
(approx.)
90
108
1.5
2.78
100
115
3.44
105
125
4.19
115
132
5.07
120
140
6.09
115
130
135
150
1.5
2
2.94
7.2
120
135
140
157
1.5
2
3.08
8.38
130
150
150
175
1.5
2.5
3.94
11.5
145
165
165
190
2
2.5
5.78
15
160
180
180
205
2
3
7.92
18.6
170
195
195
225
2
3
9.76
23.7
185
205
205
235
2
3
11.4
25.2
179
195
220
196
215
250
1.5
2
3
4.56
12
30.5
189
210
230
206
235
265
1.5
2.5
4
4.88
15.9
37
B-283
d1
d
B1
r
T
C
r
D1
D
d 170320mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
1
static
kgf
Limiting
speeds
rpm
Ca
Coa
Ca
Coa
oil
1.5
3
5
425
855
1,660
1,770
3,050
5,750
43,500
87,000
169,000
180,000
310,000
590,000
1,600
1,200
940
42
73
109
1.5
3
5
450
995
1,840
1,920
3,600
6,200
45,500
102,000
188,000
196,000
365,000
635,000
270
320
380
48
78
115
2
4
5
530
1,150
2,010
2,230
4,250
6,800
54,000
117,000
205,000
200
280
340
400
48
85
122
2
4
5
535
1,280
2,230
2,300
4,600
7,650
220
300
360
420
48
85
122
2
4
6
555
1,390
2,300
240
340
380
440
60
85
122
2.1
4
6
260
360
420
480
60
95
132
280
380
440
520
300
320
Bearing
numbers
Dimensions
mm
D1
d1
B1
29234
29334
29434
198
216
243
233
270
324
15
23
37
20
32
50
92
96
104
1,600
1,100
890
29236
29336
29436
208
232
255
243
290
342
15
25
39
20
35
52
97
103
110
227,000
430,000
695,000
1,400
1,100
840
29238
29338
29438
223
246
271
262
308
360
15
27
41
24
38
55
104
110
117
54,500
131,000
228,000
234,000
470,000
780,000
1,400
980
790
29240
29340
29440
236
261
286
271
325
380
15
29
43
24
41
59
108
116
122
2,480
5,200
8,100
56,500
141,000
235,000
253,000
530,000
825,000
1,300
940
760
29244
29344
29444
254
280
308
292
345
400
15
29
43
24
41
58
117
125
132
825
1,380
2,400
3,600
5,250
8,700
84,000
140,000
245,000
365,000
535,000
885,000
1,100
910
740
29248
29348
29448
283
300
326
330
365
420
19
29
43
30
41
59
130
135
142
2.1
5
6
870
1,710
2,740
3,950
6,800
10,000
88,500
400,000
175,000
695,000
279,000 1,020,000
1,100
810
670
29252
29352
29452
302
329
357
350
405
460
19
32
48
30
45
64
139
148
154
60
95
145
2.1
5
6
875
1,800
3,350
4,050
7,250
12,400
89,000
415,000
184,000
740,000
340,000 1,270,000
1,000
790
610
29256
29356
29456
323
348
387
370
423
495
19
32
52
30
46
68
150
158
166
420
480
540
73
109
145
3
5
6
1,190
2,140
3,450
5,350
8,250
13,200
121,000
545,000
218,000
840,000
350,000 1,340,000
870
700
590
29260
29360
29460
353
379
402
405
460
515
21
37
52
38
50
70
162
168
175
440
500
580
73
109
155
3
5
7.5
1,260
2,220
3,700
5,800
8,800
14,200
128,000
595,000
226,000
895,000
375,000 1,440,000
840
680
550
29264
29364
29464
372
399
435
430
482
555
21
37
55
38
53
75
172
180
191
rs min
170
240
280
340
42
67
103
180
250
300
360
190
B-284
da
ra
ra

dynamic
PaFa1.2Fr
static
PoaFa2.7Fr
Fr
when
0.55
Fa
Da
Abutment and
fillet dimensions
Mass
da
mm
Da
ras
kg
min
max
max
(approx.)
201
220
245
218
245
285
1.5
2.5
4
6.02
16.6
45
211
235
260
228
260
300
1.5
2.5
4
6.27
21.2
52.9
225
250
275
245
275
320
2
3
4
8.8
26
62
235
265
290
255
295
335
2
3
4
9.14
31.9
73.3
260
285
310
275
315
355
2
3
5
9.94
34.5
77.8
285
300
330
305
330
375
2
3
5
17.5
36.6
82.6
305
330
360
325
365
405
2
4
5
18.6
52
108
325
350
390
345
390
440
2
4
5
19.8
54.6
140
355
380
410
380
420
460
2.5
4
5
30.9
75.8
147
375
400
435
400
440
495
2.5
4
6
33.5
79.9
181
B-285
d1
d
B1
r
T
C
r
D1
D
d 340500mm
Boundary dimensions
Basic load ratings

static
dynamic
dynamic
mm
kN
1
static
kgf
Coa
3
5
7.5
1,240
2,650
4,400
5,800
10,700
17,500
126,000
590,000
270,000 1,090,000
445,000 1,790,000
820
610
500
85
122
170
4
5
7.5
1,510
2,710
4,500
7,050
11,100
18,500
154,000
720,000
276,000 1,130,000
460,000 1,890,000
520
600
670
85
132
175
4
6
7.5
1,590
3,200
4,900
7,650
13,300
19,700
400
540
620
710
85
132
185
4
6
7.5
1,620
3,400
5,450
420
580
650
730
95
140
185
5
6
7.5
440
600
680
780
95
145
206
460
620
710
800
Dimensions
mm
D1
d1
B1
29268
29368
29468
395
428
462
445
520
590
21
41
61
37
59
82
183
192
201
720
590
490
29272
29372
29472
423
448
480
485
540
610
25
41
61
44
59
82
194
202
210
162,000
780,000
325,000 1,360,000
500,000 2,010,000
700
550
470
29276
29376
29476
441
477
504
505
580
640
27
44
63
42
63
85
202
216
230
7,950
14,500
22,100
165,000
810,000
345,000 1,480,000
555,000 2,250,000
680
530
440
29280
29380
29480
460
494
534
526
596
680
27
44
67
42
64
89
212
225
236
2,100
3,600
5,500
10,400
15,500
22,800
214,000 1,060,000
365,000 1,580,000
560,000 2,330,000
620
500
430
29284
29384
29484
489
520
556
564
626
700
30
48
67
46
68
89
225
235
244
5
6
9.5
2,150
3,800
6,400
10,900
16,400
26,200
219,000 1,110,000
385,000 1,680,000
650,000 2,670,000
600
480
390
29288
29388
29488
508
548
588
585
655
745
30
49
74
49
70
100
235
245
260
95
150
206
5
6
9.5
2,150
4,200
6,600
11,000
18,500
27,900
219,000 1,120,000
430,000 1,880,000
670,000 2,840,000
590
460
380
29292
29392
29492
530
567
608
605
685
765
30
51
74
46
72
100
245
257
272
480
650
730
850
103
150
224
5
6
9.5
2,400
4,200
7,500
12,000
18,700
31,500
245,000 1,220,000
430,000 1,910,000
765,000 3,200,000
550
450
350
29296
29396
29496
556
590
638
635
705
810
33
51
81
55
72
108
259
270
280
500
670
750
870
103
150
224
5
6
9.5
2,540
4,300
7,850
13,000
19,300
33,000
259,000 1,330,000
435,000 1,970,000
805,000 3,350,000
530
440
340
292/500
293/500
294/500
574
611
661
654
725
830
33
51
81
55
74
107
268
280
290
rs min
340
460
540
620
73
122
170
360
500
560
640
380
Coa
Bearing
numbers
oil
Ca
Ca
Limiting
speeds
rpm
B-286
da
ra
ra

dynamic
PaFa1.2Fr
static
PoaFa2.7Fr
Fr
when
0.55
Fa
Da
Abutment and
fillet dimensions
Mass
da
mm
Da
ras
kg
min
max
max
395
430
465
420
470
530
2.5
4
6
34.4
107
230
420
450
485
455
495
550
3
4
6
50.5
112
240
440
480
510
475
525
575
3
5
6
53.4
143
267
460
500
540
490
550
610
3
5
6
55.8
148
321
490
525
560
525
575
630
4
5
6
76.6
172
333
510
550
595
545
600
670
4
5
8
79.6
195
428
530
575
615
570
630
690
4
5
8
82.8
221
443
555
595
645
595
650
730
4
5
8
98.6
228
552
575
615
670
615
670
750
4
5
8
102
235
569
(approx.)
B-287
Locknuts, Lockwashers & Lockplates

Contents
Locknuts C- 2
Nuts C- 8
Lockwashers C-12
Lockplates C-15
Locknuts, Lockwashers
& Lockplates
Locknuts
For adapter sleeve, withdrawal sleeve and shaft
Series AN
g
30
r1
d2
d6 d1
Bearing
numbers
Mass
Reference
mm
kg
bore no.
lockof adapter washer No.
thread
1
AN00
AN01
AN02
AN03
AN04
AN05
AN06
AN07
AN08
AN09
AN10
AN11
AN12
AN13
AN14
AN15
AN16
AN17
AN18
AN19
AN20
AN21
AN22
AN23
AN24
AN25
AN26
AN27
AN28
AN29
AN30
AN31
AN32
AN33
AN34
AN36
AN38
AN40
Dimensions
M100.75
M121
M151
M171
M201
M251.5
M301.5
M351.5
M401.5
M451.5
M501.5
M552
M602
M652
M702
M752
M802
M852
M902
M952
M1002
M1052
M1102
M1152
M1202
M1252
M1302
M1352
M1402
M1452
M1502
M1553
M1603
M1653
M1703
M1803
M1903
M2003
r1
d2
d1
d6
max
(approx.)
18
22
25
28
32
38
45
52
58
65
70
75
80
85
92
98
105
110
120
125
130
140
145
150
155
160
165
175
180
190
195
200
210
210
220
230
240
250
13.5
17
21
24
26
32
38
44
50
56
61
67
73
79
85
90
95
102
108
113
120
126
133
137
138
148
149
160
160
171
171
182
182
193
193
203
214
226
14
18
21
24
28
34
41
48
53
60
65
69
74
79
85
91
98
103
112
117
122
130
135
140
145
150
155
163
168
178
183
186
196
196
206
214
224
234
3
3
4
4
4
5
5
5
6
6
6
7
7
7
8
8
8
8
10
10
10
12
12
12
12
12
12
14
14
14
14
16
16
16
16
18
18
18
2
2
2
2
2
2
2
2
2.5
2.5
2.5
3
3
3
3.5
3.5
3.5
3.5
4
4
4
5
5
5
5
5
5
6
6
6
6
7
7
7
7
8
8
8
10.5
12.5
15.5
17.5
20.5
25.8
30.8
35.8
40.8
45.8
50.8
56
61
66
71
76
81
86
91
96
101
106
111
116
121
126
131
136
141
146
151
156.5
161.5
166.5
171.5
181.5
191.5
201.5
4
4
5
5
6
7
7
8
9
10
11
11
11
12
12
13
15
16
16
17
18
18
19
19
20
21
21
22
22
24
24
25
25
26
26
27
28
29
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.005
0.007
0.01
0.013
0.019
0.025
0.043
0.053
0.085
0.119
0.148
0.158
0.174
0.203
0.242
0.287
0.397
0.451
0.556
0.658
0.698
0.845
0.965
1.01
1.08
1.19
1.25
1.55
1.56
2
2.03
2.21
2.59
2.43
2.8
3.07
3.39
3.69
2 Uses adapter series H31, H2, and H23
3 Can also use washers with straight inner tabs (code "X").
C-2
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
24
26
28
30
32
34
36
38
40
AW00
AW01
AW02
AW03
AW04
AW05
AW06
AW07
AW08
AW09
AW10
AW11
AW12
AW13
AW14
AW15
AW16
AW17
AW18
AW19
AW20
AW21
AW22
AW23
AW24
AW25
AW26
AW27
AW28
AW29
AW30
AW31
AW32
AW33
AW34
AW36
AW38
AW40
Locknuts
Reference
withdrawal sleeve No.
Shaft
mm
AH30
AH240
AH31
AH241
AH2
AH32
AH3
AH23
(for shaft)
AHX3024
AHX3026
AHX3028
AHX3030
AH 3032
AH 3034
AH 3036
AH24024
AH24026
AH24028
AH24030
AH24032
AH24034
AH24036
AH24038
AHX3122
AHX3124
AHX3126
AHX3128
AHX3130
AH 3132
AH 3134
AH 3136
AH24122
AH24124
AH24126
AH24128
AH24130
AH24132
AH24134
AH24136
AH24138
AH208
AH209
AH210
AH211
AH212
AH213
AH214
AH215
AH216
AH217
AH218
AH219
AH220
AH221
AH222
AH224
AH226
AH228
AH230
AH232
AH234
AH236
C-3
AHX3218
AHX3220
AHX3222
AHX3224
AHX3226
AHX3228
AHX3230
AH 3232
AH 3234
AH 3236
AH 308
AH 309
AHX310
AHX311
AHX312
AH 313
AH 314
AH 315
AH 316
AHX317
AHX318
AHX319
AHX320
AHX321
AHX322
AHX324
AHX326
AHX328
AHX330
AH 332
AH 334
AH 2308
AH 2309
AHX2310
AHX2311
AHX2312
AH 2313
AHX2314
AHX2315
AHX2316
AHX2317
AHX2318
AHX2319
AHX2320
AHX2322
AHX2324
AHX2326
AHX2328
AHX2330
AH 2332
AH 2334
AH 2336
10
12
15
17
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
180
190
200
Locknuts
For adapter sleeve and shaft
Series AN
B
30 G
h
r1
dP
d6 d1
d2
Bearing
numbers
Dimensions
thread
1
AN 44
AN 48
AN 52
AN 56
AN 60
AN 64
AN 68
AN 72
AN 76
AN 80
AN 84
AN 88
AN 92
AN 96
AN100
Mass
mm
thread
r1
d2
d1
d6
max
Tr2204
Tr2404
Tr2604
Tr2804
Tr3004
Tr3205
Tr3405
Tr3605
Tr3805
Tr4005
Tr4205
Tr4405
Tr4605
Tr4805
Tr5005
280
300
330
350
380
400
440
460
490
520
540
560
580
620
630
250
270
300
320
340
360
400
420
450
470
490
510
540
560
580
260
280
306
326
356
376
410
430
454
484
504
520
540
580
584
20
20
24
24
24
24
28
28
32
32
32
36
36
36
40
10
10
12
12
12
12
15
15
18
18
18
20
20
20
23
222
242
262
282
302
322.5
342.5
362.5
382.5
402.5
422.5
442.5
462.5
482.5
502.5
32
34
36
38
40
42
55
58
60
62
70
70
75
75
80
0.8
0.8
0.8
0.8
0.8
0.8
1
1
1
1
1
1
1
1
1
15
15
18
18
18
18
21
21
21
27
27
27
27
27
27
M 81.25
M 81.25
M101.5
M101.5
M101.5
M101.5
M121.75
M121.75
M121.75
M162
M162
M162
M162
M162
M162
2 Thread dimensions are as per JIS B0205 (metric coarse screw thread type thread).
3 Applied to adapter series H31, H32, and H23
C-4
kg
dP
(approx.)
238
258
281
301
326
345
372
392
414
439
459
477
497
527
539
5.2
5.95
8.05
9.05
11.8
13.1
23.1
25.1
30.9
36.9
43.5
45.3
50.4
62.2
63.3
Locknuts
Reference
3
bore no.
lockof adapter
plate No.
Shaft
mm
(for shaft)
44
48
52
56
60
64
68
72
76
80
84
88
92
96
/500
AL 44
AL 44
AL 52
AL 52
AL 60
AL 64
AL 68
AL 68
AL 76
AL 80
AL 80
AL 88
AL 88
AL 96
AL100
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
C-5
Nuts
For withdrawal and shaft
Series HN
g
30
r1
d2
d6 d1
Bearing
numbers
Dimensions
thread
1
HN 42
HN 44
HN 46
HN 48
HN 50
HN 52
HN 54
HN 56
HN 58
HN 60
HN 62
HN 64
HN 66
HN 68
HN 70
HN 72
HN 74
HN 76
HN 80
HN 84
HN 88
HN 92
HN 96
HN100
HN102
HN106
HN110
Mass
mm
Reference
kg
AH240
r1
d2
d1
d6
max
(approx.)
Tr2104
Tr2204
Tr2304
Tr2404
Tr2504
Tr2604
Tr2704
Tr2804
Tr2904
Tr3004
Tr3105
Tr3205
Tr3305
Tr3405
Tr3505
Tr3605
Tr3705
Tr3805
Tr4005
Tr4205
Tr4405
Tr4605
Tr4805
Tr5005
Tr5106
Tr5306
Tr5506
270
280
290
300
320
330
340
350
370
380
390
400
420
440
450
460
470
490
520
540
560
580
620
630
650
670
700
238
250
260
270
290
300
310
320
330
340
350
360
380
400
410
420
430
450
470
490
510
540
560
590
590
610
640
250
260
270
280
300
306
316
326
346
356
366
376
390
410
420
430
440
454
484
504
520
540
580
590
604
624
654
20
20
20
20
20
24
24
24
24
24
24
24
28
28
28
28
28
32
32
32
36
36
36
40
40
40
40
10
10
10
10
10
12
12
12
12
12
12
12
15
15
15
15
15
18
18
18
20
20
20
23
23
23
23
212
222
232
242
252
262
272
282
292
302
312.5
322.5
332.5
342.5
352.5
362.5
372.5
382.5
402.5
422.5
442.5
462.5
482.5
502.5
513
533
553
30
32
34
34
36
36
38
38
40
40
42
42
52
55
55
58
58
60
62
70
70
75
75
80
80
80
80
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4.75
5.35
5.8
6.2
7
8.55
9.2
10
11.8
12
13.4
13.5
20.4
24.5
25.2
27.5
28.2
33.5
40
46.9
48.5
55
67
69
75
78
92.5
1 Standard thread shapes and dimensions are as per JIS B0216 (metric block type thread).
C-8
withdrawal sleeve no.

AH31
AH241
AH24040
AH24044H
AH24048H
AH24052H
AH24056H
AH24060H
AH24064H
AH 3138
AH 3140
AH 3144
AH 3148
AH 3152
AH 3156
AH 3160
AH 3164
AH 3168
AH 3172
AH 3176
AH 3180
AH 3184
AHX3188
AHX3192
AHX3196
AHX31/500
AH24140
AH24144H
AH24148H
AH24152H
AH24156H
AH24160H
AH24164H
AH24168H
AH24172H
AH24176H
AH24180H
AH24184H
AH24188H
AH24192H
AH24196H
AH241/500H
Nuts
Reference
AH22

AH32
AH23
AH2238
AH 3238
AH2240
AH 3240
AH2244
AH2248
AH2252
AH2256
AH2260
AH 3260
AH2264
AH 3264
AH 3268
AH 3272
AH 3276
AH 3280
AH 3284
AHX3288
AHX3292
AHX3296
AHX32/500
AH2338
AH2340
AH2344
AH2348
AH2352
AH2356
C-9
Nuts
For withdrawal and shaft
Series HNL
g
b
30
r1
d2
d6 d1
Bearing
Dimensions
thread
G
HNL 41
HNL 43
HNL 47
HNL 52
HNL 56
HNL 60
HNL 64
HNL 69
HNL 72
HNL 73
HNL 76
HNL 77
HNL 80
HNL 82
HNL 84
HNL 86
HNL 88
HNL 90
HNL 92
HNL 94
HNL 96
HNL 98
HNL100
HNL104
HNL106
HNL108
Tr2054
Tr2154
Tr2354
Tr2604
Tr2804
Tr3004
Tr3205
Tr3455
Tr3605
Tr3655
Tr3805
Tr3855
Tr4005
Tr4105
Tr4205
Tr4305
Tr4405
Tr4505
Tr4605
Tr4705
Tr4805
Tr4905
Tr5005
Tr5206
Tr5306
Tr5406
Mass
mm
Reference
kg
AH30
r1
d2
d1
250
260
280
310
330
360
380
410
420
430
450
450
470
480
490
500
520
520
540
540
560
580
580
600
630
630
232
242
262
290
310
336
356
384
394
404
422
422
442
452
462
472
490
490
510
510
530
550
550
570
590
590
234
242
262
290
310
336
356
384
394
404
422
422
442
452
462
472
490
490
510
510
530
550
550
570
590
590
18
20
20
20
24
24
24
28
28
28
28
28
28
32
32
32
32
32
32
32
36
36
36
36
40
40
8
9
9
10
10
12
12
13
13
13
14
14
14
14
14
14
15
15
15
15
15
15
15
15
20
20
d6
207
217
237
262
282
302
322.5
347.5
362.5
367.5
382.5
387.5
402.5
412.5
422.5
432.5
442.5
452.5
462.5
472.5
482.5
492.5
502.5
523
533
543
max
(approx.)
30
30
34
34
38
42
42
45
45
48
48
48
52
52
52
52
60
60
60
60
60
60
68
68
68
68
0.8
0.8
0.8
0.8
0.8
0.8
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3.43 AH 3038
3.72 AH 3040
4.6
AH 3044
5.8
AH 3048
6.72 AH 3052
9.6
AH 3056
10.3
AH 3060
11.5
AH 3064
12.1
14.2
AH 3068
16
15
AH 3072
18.5
19
AH 3076
19.4
19.8
AH 3080
27
23.8
AH 3084
28
25
AHX3088
29.5
34
AHX3092
35
37
AHX3096
47
43.5 AHX30/500
1 Standard thread shapes and dimensions are as per JIS B0216 (metric block type thread).
C-10

AH24D
AH24068H
AH24072H
AH24076H
AH24080H
AH24084H
AH24088H
AH24092H
AH24096H
AH240/500H
AH2
AH238
AH240
AH244
AH248
AH252
AH256
Lockwashers
Series AW
Bent inner
tab type
Bearing numbers
Dimensions
Straight inner
tab type
No.of tabs
mm
bent inner straight inner
tab type
tab type
AW00
AW01
AW02
AW03
AW04
AW05
AW06
AW07
AW08
AW09
AW10
AW11
AW12
AW13
AW14
AW15
AW16
AW17
AW18
AW19
AW20
AW21
AW22
AW23
AW24
AW25
AW26
AW27
AW28
AW29
AW30
AW31
AW32
AW33
AW34
AW36
AW38
AW40
AW00X
AW01X
AW02X
AW03X
AW04X
AW05X
AW06X
AW07X
AW08X
AW09X
AW10X
AW11X
AW12X
AW13X
AW14X
AW15X
AW16X
AW17X
AW18X
AW19X
AW20X
AW21X
AW22X
AW23X
AW24X
AW25X
AW26X
AW27X
AW28X
AW29X
AW30X
AW31X
AW32X
AW33X
AW34X
AW36X
AW38X
AW40X
d3
f1
B1
d4
d5
10
12
15
17
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
180
190
200
8.5
10.5
13.5
15.5
18.5
23
27.5
32.5
37.5
42.5
47.5
52.5
57.5
62.5
66.5
71.5
76.5
81.5
86.5
91.5
96.5
100.5
105.5
110.5
115
120
125
130
135
140
145
147.5
154
157.5
164
174
184
194
3
3
4
4
4
5
5
6
6
6
6
8
8
8
8
8
10
10
10
10
12
12
12
12
14
14
14
14
16
16
16
16
18
18
18
20
20
20
1
1
1
1
1
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
1.8
1.8
1.8
1.8
1.8
1.8
1.8
2
2
2
2
2
2
2
2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3
3
4
4
4
5
5
5
6
6
6
7
7
7
8
8
8
8
10
10
10
12
12
12
12
12
12
14
14
14
14
16
16
16
16
18
18
18
13.5
17
21
24
26
32
38
44
50
56
61
67
73
79
85
90
95
102
108
113
120
126
133
137
138
148
149
160
160
171
171
182
182
193
193
203
214
226
21
25
28
32
36
42
49
57
62
69
74
81
86
92
98
104
112
119
126
133
142
145
154
159
164
170
175
185
192
202
205
212
217
222
232
242
252
262
1 Uses adapter series H31, H2, H32, H3, and H23.
C-12
kg
100 pieces
bent inner tab type

r2
B2
0.5
0.5
1
1
1
1
1
1
1
1
1
1
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2
2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
8
Mass
(approx.)
9
11
13
13
13
13
13
15
15
17
17
17
17
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
0.131
0.192
0.253
0.313
0.35
0.64
0.78
1.04
1.23
1.52
1.6
1.96
2.53
2.9
3.34
3.56
4.64
5.24
6.23
6.7
7.65
8.26
9.4
10.8
10.5
11.8
11.3
14.4
14.2
16.8
15.5
20.9
22.2
24.1
24.7
26.8
27.8
29.3
Lockwashers
bore no.
of adapter
Reference
locknut no.
Allowable washer dimensions

shaft
mm
(for shaft)
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
24
26
28
30
32
34
36
38
40
AN00
AN01
AN02
AN03
AN04
AN05
AN06
AN07
AN08
AN09
AN10
AN11
AN12
AN13
AN14
AN15
AN16
AN17
AN18
AN19
AN20
AN21
AN22
AN23
AN24
AN25
AN26
AN27
AN28
AN29
AN30
AN31
AN32
AN33
AN34
AN36
AN38
AN40
10
12
15
17
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
180
190
200
Units mm
Nominal bore dia. Dimensional tolerance Dimension tolerance

for distance from inner for width of inner tab
f1
d3
tab to bore surface
M
mm
High
Low
Over up to/incl
High
Low
6
50
80
120
50
80
120
200
0.3
0.3
0.5
0.5
0
0
0
0
0.2
0.5
0.7
1
0.2
0.5
0.7
1
Above table is applicable to AWL series.
Note: Narrow slit type adapter sleeves appended with the H2, H3,and H23 series code suffix "X", use straight inner tab washers (marked with "X");
wide slit type adapter sleeves without the suffix "X" can either straight or bent inner tab washers.
C-13
Lockwashers
Series AWL
25
r2
1
d4
B2
B1
d5
d3
Bent inner
tab type
Bearing numbers
Dimensions
mm
bent inner straight inner

tab type
tab type
AWL24
AWL26
AWL28
AWL30
AWL32
AWL34
AWL36
AWL38
AWL40
AWL24X
AWL26X
AWL28X
AWL30X
AWL32X
AWL34X
AWL36X
AWL38X
AWL40X
d3
f1
B1
d4
d5
120
130
140
150
160
170
180
190
200
115
125
135
145
154
164
174
184
194
14
14
16
16
18
18
20
20
20
2
2
2
2
2.5
2.5
2.5
2.5
2.5
12
12
14
14
16
16
18
18
18
133
143
151
164
174
184
192
202
218
155
165
175
190
200
210
220
230
250
NO.of tabs Mass

Reference
1
kg
bore no.
locknut shaft
bent inner tab type
of adapter
no.
100 pieces
mm
r2
B2
(approx.)
(for shaft)
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
6
6
8
8
8
8
8
8
8
19
19
19
19
19
19
19
19
19
1 Uses adapter series H31, H2, H32, H3, and H23.

Note: Wide slit type adapter sleeves without the suffix "X" can use either straight or bent inner tab washers.
C-14
Straight inner
tab type
7.7
8.7
10.9
11.3
16.2
19
18
20.5
21.4
24
26
28
30
32
34
36
38
40
ANL24
ANL26
ANL28
ANL30
ANL32
ANL34
ANL36
ANL38
ANL40
120
130
140
150
160
170
180
190
200
Lockplates
Series AL, ALL
L2
B4
L3 L1
d7
B3
B3
Bearing
numbers
Dimensions
Mass
mm
kg
100 pieces
AL 44
AL 52
AL 60
AL 64
AL 68
AL 76
AL 80
AL 88
AL 96
AL100
Reference
locknut no.
B3
B4
L2
d7
L1
L3
(approx.)
4
4
4
5
5
5
5
5
5
5
20
24
24
24
28
32
32
36
36
40
12
12
12
15
15
15
15
15
15
15
9
12
12
12
14
14
18
18
18
18
22.5
25.5
30.5
31
38
40
45
43
53
45
30.5
33.5
38.5
41
48
50
55
53
63
55
2.6
3.39
3.79
5.35
6.65
7.96
8.2
9
10.4
10.5
AN44,AN48
AN52,AN56
AN60
AN64
AN68,AN72
AN76
AN80,AN84
AN88,AN92
AN96
AN100
Dimensions
Mass
Reference
mm
kg
Note: Series AL uses series H31,H32,and H23 adapters.
Bearing
numbers
100 pieces
ALL44
ALL48
ALL56
ALL60
ALL64
ALL72
ALL76
ALL84
ALL88
ALL96
B3
B4
L2
d7
L1
L3
4
4
4
4
5
5
5
5
5
5
20
20
24
24
24
28
28
32
32
36
12
12
12
12
15
15
15
15
15
15
7
9
9
9
9
9
12
12
14
14
13.5
17.5
17.5
20.5
21
20
24
24
28
28
21.5
25.5
25.5
28.5
31
30
34
34
38
38
Note: Series ALL uses series H30 adapters.
C-15
locknut no.
(approx.)
2.12
2.29
2.92
3.16
4.56
5.03
5.28
6.11
6.45
7.29
ANL44
ANL48,ANL52
ANL56
ANL60
ANL64,ANL68
ANL72
ANL76,ANL80
ANL84
ANL88,ANL92
ANL96,ANL100
Catalog List & Appendix Table
Catalog List
CATALOG TITLES
CATALOG No.
BALL AND ROLLER BEARINGS

2202/C/E/F/D/I/K/S/T/TC
Large Bearings
2250/E
Plastic Cages for Rolling Element Bearings
3012/E
3013/E
Miniature Molded Rubber Bearings
3014/E
Vacuum Bearings
3016/E
Care and Maintenance of Bearings
3017/E/S
Ultra-Clean Bearings
3018/E
HL Bearings
3020/E
Bearings with Solid Grease
3022/E/S
Large Size, Long Operating Life Bearing-EA type
3024/E
Tapered Roller Bearings ECO-Top
3026/E/S
Self-Aligning Spherical Roller Bearings LH Series
3027/E/S
Super Slim Ball Bearings
3101/E
Ceramic Ball / Angular-Contact Bearings
3203/E
Insulated Bearings-Resin Coated Type
3204/E
Cross Roller Thrust Bearings
3501/E
Type E Spherical Roller Bearings
3701/E
Sealed Self-Aligning Roller Bearings-WA Type
3702/E
Aerospace Bearings
8102/E
Precision Rolling Bearings for Machine Tools
8401/E
NEEDLE ROLLER BEARINGS

Needle Roller Bearings
2300/E/I
Miniature Cam Followers
3601/E
CONSTANT VELOCITY JOINTS

Constant Velocity Joints for Automobiles
5601/JE
TRI-Ball Joint / Constant Velocity Joints
5602/E
Constant Velocity Joints for Industrial Applications
5603/E
BEARING UNITS
Bearing Units
2400/E/I/S
Bearing Units with Ductile Cast Iron Housing
3901/E
Bearing Units Steel Series
3902/E
Bearing Units Stainless Series
3903/E
Bearing Units Plastic Housing Series
3904/E
Triple-Sealed Bearings for Bearing Units
3905/E
D-2
Catalog List
CATALOG TITLES
CATALOG No.
PLUMMER BLOCKS
Plummer Blocks
2500E/S
PRECISION BALL SCREWS

Precision Ball Screws
6000/E
Rolled Ball Screws
6206/E
PARTS FEEDER
Parts Feeder
7018/E
NTN Parts Feeder with Standard Attachments (for Bolts or Washer)
7016/E
CLUTCHES
One-way Clutches (Overrunning Clutches)
6402/E
PLAIN BEARINGS
"BEAREE" NTN Engineering Plastics
5100/E
NTN "BEARPHITE" Oil Impregnated Sintered Bearings
5202/E
Spherical Plain Bearings
5301/E
HANDBOOK
Bearing Units Handbook
9011/E/S
Rolling Bearings Handbook
9012/E
Needle Roller Bearings Handbook
9013/E
GUIDE BOOK
Parts Feeder Guide Book
7019/E
Automotive Products Guide Book
8021/E/D/F
New Products Guide
9208/E
Food Machinery Component Guide
9209/E
Product Catalog for Paper Manufacturing Machinery
9210/E
ELECTRONIC CATALOG
NTN Electronic Catalog (CD-ROM for Windows)
7903/E
NTN Autoparts Catalog (CD-ROM for Windows)
7905/E
Reference Kit Program -Bearing Interchange- (CD-ROM for Windows)
7907/E
OTHERS
Adapters Locknuts and Lockwasher-Inch series
2612/E
Steel Balls for Bearing
4202/E
Bearing Handling
9103/E/P/S
C:Chinese
K:Korean
E:English
S:Spanish
F:French
T:Thai
D:Germany
I:Italian
TC: Taipei Chinese
Note : The above are basic numbers. Renewal of the suffix by a revision.
D-3
Appendix Table
Inch-millimetre conversion table

inch
fraction
decimal
1/64
1/32
3/64
1/16
5/64
3/32
7/64
1/ 8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/ 4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/ 8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/ 2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/ 8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/ 4
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/ 8
57/64
39/32
59/64
15/16
61/64
31/32
63/64
0.015625
0.031250
0.046875
0.062500
0.078125
0.093750
0.109375
0.125000
0.140625
0.156250
0.171875
0.187500
0.203125
0.218750
0.234375
0.250000
0.265625
0.281250
0.296875
0.312500
0.328125
0.343750
0.359375
0.375000
0.390625
0.406250
0.421875
0.437500
0.453125
0.468750
0.484375
0.500000
0.515625
0.531250
0.546875
0.562500
0.578125
0.593750
0.609375
0.625000
0.640625
0.656250
0.671875
0.687500
0.703125
0.718750
0.734375
0.750000
0.765625
0.781250
0.796875
0.812500
0.828125
0.843750
0.859375
0.875000
0.890625
0.906250
0.921875
0.937500
0.953125
0.968750
0.984375
0.397
0.794
1.191
1.588
1.984
2.381
2.778
3.175
3.572
3.969
4.366
4.762
5.159
5.556
5.953
6.350
6.747
7.144
7.541
7.938
8.334
8.731
9.128
9.525
9.922
10.319
10.716
11.112
11.509
11.906
12.303
12.700
13.097
13.494
13.891
14.288
14.684
15.081
15.478
15.875
16.272
16.669
17.066
17.462
17.859
18.256
18.653
19.050
19.447
19.844
20.241
20.638
21.034
21.431
21.828
22.225
22.622
23.019
23.416
23.812
24.209
24.606
25.003
25.400
25.797
26.194
26.591
26.988
27.384
27.781
28.178
28.575
28.972
29.369
29.766
30.162
30.559
30.956
31.353
31.750
32.147
32.544
32.941
33.338
33.734
34.131
34.528
34.925
35.322
35.719
36.116
36.512
36.909
37.306
37.703
38.100
38.497
38.894
39.291
39.688
40.084
40.481
40.878
41.275
41.672
42.069
42.466
42.862
43.259
43.656
44.053
44.450
44.847
45.244
45.641
46.038
46.434
46.831
47.228
47.625
48.022
48.419
48.816
49.212
49.609
50.006
50.403
2
50.800
51.197
51.594
51.991
52.388
52.784
53.181
53.578
53.975
54.372
54.769
55.166
55.562
55.959
56.356
56.753
57.150
57.547
57.944
58.341
58.738
59.134
59.531
59.928
60.325
60.722
61.119
61.516
61.912
62.309
62.706
63.103
63.500
63.897
64.294
64.691
65.088
65.484
65.881
66.278
66.675
67.072
67.469
67.866
68.262
68.659
69.056
69.453
69.850
70.247
70.644
71.041
71.438
71.834
72.231
72.628
73.025
73.422
73.819
74.216
74.612
75.009
75406
75.803
3
76.200
76.597
76.994
77.391
77.788
78.184
48.581
78.978
79.375
79.772
80.169
80.566
80.962
81.359
81.756
82.153
82.550
82.947
83.344
83.741
84.138
84.534
84.931
85.328
85.725
86.122
86.519
86.916
87.312
87.709
88.106
88.503
88.900
89.297
89.694
90.091
90.488
90.884
91.281
91.678
92.075
92.472
92.869
93.266
93.662
94.059
94.456
94.853
95.250
95.647
96.044
96.441
96.838
97.234
97.631
98.028
98.425
98.822
99.219
99.616
100.012
100.409
100.806
101.203
4
101.600
101.997
102.394
102.791
103.188
103.584
103.981
104.378
104.775
105.172
105.569
105.966
106.362
106.759
107.156
107.553
107.950
108.347
108.744
109.141
109.538
109.934
110.331
110.728
111.125
111.522
111.919
112.316
112.721
113.109
113.506
113.903
114.300
114.697
115.094
115.491
115.888
116.284
116.681
117.078
117.475
117.872
118.269
118.666
119.062
119.459
119.856
120.253
120.650
121.047
121.444
121.841
122.238
122.634
123.031
123.428
123.825
124.222
124.619
125.016
125.412
125.809
126.206
126.603
D-4
5
127.000
127.397
127.794
128.191
128.588
128.984
129.381
129.778
130.175
130.572
130.969
131.366
131.762
132.159
132.556
132.953
133.350
133.747
134.144
134.541
134.938
135.334
135.731
136.128
136.525
136.922
137.319
137.716
138.112
138.509
138.906
139.303
139.700
140.097
140.494
140.891
141.283
141.684
142.081
142.478
142.875
143.272
143.669
144.066
144.462
144.859
145.256
145.653
146.050
146.447
146.844
147.241
147.638
148.034
148.431
148.828
149.225
149.622
150.019
150.416
150.812
151.209
151.606
152.003
6
152.400
152.797
153.194
153.591
153.988
154.384
154.781
155.178
155.575
155.972
156.369
156.766
157.162
157.559
157.956
158.353
158.750
159.147
159.544
159.941
160.338
160.734
161.131
161.528
161.925
162.322
162.719
163.116
163.512
163.909
164.306
164.703
165.100
165.497
165.894
166.291
166.688
167.084
167.481
167.878
168.275
168.672
169.069
169.466
169.862
170.259
170.656
171.053
171.450
171.847
172.244
172.641
173.038
173.434
173.831
174.228
174.625
175.022
175.419
175.816
176.212
176.609
177.006
177.403
7
177.800
178.197
178.594
178.991
179.388
179.784
180.181
180.578
180.975
181.372
181.769
182.166
182.562
182.959
183.356
183.753
184.150
184.547
184.944
185.341
185.738
186.134
186.531
186.928
187.325
187.722
188.119
188.516
188.912
189.309
189.706
190.103
190.500
190.897
191.294
191.691
192.088
192.484
192.881
193.278
193.675
194.072
194.469
194.866
195.262
195.659
196.056
196.453
196.850
197.247
197.644
198.041
198.438
198.834
199.231
199.628
200.025
200.422
200.819
201.216
201.612
202.009
202.406
202.803
8
203.200
203.597
203.994
204.391
204.788
205.184
205.581
205.978
206.375
206.772
207.169
207.566
207.962
208.359
208.756
209.153
209.550
209.947
210.344
210.741
211.138
211.534
211.931
212.328
212.725
213.122
213.519
213.916
214.312
214.709
215.106
215.503
215.900
216.297
216.694
217.091
217.488
217.884
218.281
218.678
219.075
219.472
219.869
220.266
220.662
221.056
221.456
221.853
222.250
222.647
223.044
223.441
223.838
224.234
224.631
225.028
225.425
225.822
226.219
226.616
227.012
227.409
227.806
228.203
9
228.600
228.997
229.394
229.791
230.188
230.584
230.981
231.378
231.775
232.172
232.569
232.966
233.362
233.759
234.156
234.553
234.950
235.347
235.744
236.141
236.538
236.934
237.331
237.728
238.125
238.522
238.919
239.316
239.712
240.109
240.506
240.903
241.300
241.697
242.094
242.491
242.888
243.284
243.681
244.078
244.475
244.872
245.269
245.666
246.062
246.459
246.856
247.253
247.650
248.047
248.444
248.841
249.238
249.634
250.031
250.428
250.825
251.222
251.619
252.016
252.412
252.809
253.206
253.603
Appendix Table
SI-customary unit conversion table

Length
Area
m2
Volume
m3
1m
1in
1ft
=3.281ft=39.370in
=2.540-210m=25.400mm
=0.305mm
1m2
=10.764ft2
=1550.003in2
=9.29010-2m2
=6.45210-4m2
=6.452cm2
1ft2
1in2
1m3
Mass
kg
Force
Power
Pressure,
stress
Torque
Velocity
Kinematic
viscosity
Temperature
Pa
Nm
1kg
1lb
1oz
=2.205lb
=0.454kg
=28.350g
1N
1kgf
=0.102kgf
=9.807N
1N
1lbf
=0.225lbf
=4.448N
1W
=0.102kgfm/s
=1.36010-3PS
=735.499W=75kgfm/s
=9.807W
1W
1ftlbf/s
1hp(550ftlbf/s)
=0.738ftlbf/s
=1.356W
=745.700W
1Pa
1kgf/mm2
1MPa
=1.02010-7kgf/mm2
=9.807106Pa
=1106Pa=1N/mm2
=0.102kgf/mm2
1Pa
1lbf/in2
1lbf/ft2
=1.45010-4lbf/in2
=6.895103Pa
=47.880Pa
1Nm
1kgfm
=0.102kgfm
=9.807Nm
1Nm
1lbfft
1lbfin
=0.738lbfft
=1.356Nm
=0.113Nm
1m/s
1mile/h
1ft/s
=2.237mile/h
=3.281ft/s
=1.609km/h
=0.305m/s
1PS
1kgfm/s
m/s
m2/s
1ft3
1in3
=35.315ft3
=6.102104in3
=2.83210-2m3
=16.387cm3
1m2/s
1mm2/s
=1106cSt
=1cSt
1m/s
1ft2/s
=10.764ft2/s
=9.29010-2m2/s
tC
1C
=(tC+273.15)K
=1K
tC
TF
=0.56(tF-32)
=1.8tC+32
D-5

Catalogo de Rodamientos

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogo de Rodamientos

Uploaded by

Copyright:

Available Formats

For New Technology Network

Ball and Roller Bearings

Deep Groove Ball Bearings

Miniature and Extra Small Bearings

Angular Contact Ball Bearings

Self-Aligning Ball Bearings

Cylindrical Roller Bearings

Tapered Roller Bearings

Spherical Roller Bearings

Locknuts, Lockwashers & Lockplates

Catalog List & Appendix Table

NTN Corporation. 2001

TECHNICAL DATA CONTENTS

1. Classification and Characteristics

4.6 Bearing rated life and

1.1 Rolling bearing construction A-5

5. Boundary Dimensions and

1.3 Characteristics of rolling bearings A-9

5.1 Boundary dimensions A-28

2. Bearing Selection A-10

6. Bearing Tolerances A-33

2.3 Selection of bearing arrangement A-13

6.1 Dimensional accuracy and

3. Load Rating and Life A-15

6.3 Bearing tolerance measurement

3.1 Bearing lifeA-15

7. Bearing Fits A-47

3.5 Basic static load ratingA-17

7.1 Interference A-47

3.6 Allowable static equivalent load A-18

7.2 The necessity of a proper fit A-47

4. Bearing Load Calculation A-19

8. Bearing Internal Clearance

4.3 Mean load A-22

8.1 Bearing internal clearance A-56

4.4 Equivalent load A-23

8.2 Internal clearance selection A-56

4.5 Allowable axial load for cylindrical

8.3 Preload A-64

4.1 Loads acting on shaftsA-19

9. Allowable Speed A-68

14. Shaft and Housing DesignA-83

10. Friction and

14.3 Shaft and housing accuracy A-85

10.1 Friction A-69

15. Bearing Handling A-86

11. Lubrication A-70

15.2 Installation A-86

11.1 Lubrication of rolling bearings A-70

15.3 Internal clearance adjustment A-88

11.2 Lubrication methods and

15.4 Post installation running testA-90

11.3 Grease lubrication A-70

16. Bearing Damage and

12. External bearing

17. Technical data A-95

13. Bearing Materials A-81

17.2 Angular contact ball bearing axial load and

13.1 Raceway and

17.3 Tapered roller bearing axial load and

13.2 Cage materialsA-82

17.4 Fitting surface pressureA-98

Classification and Characteristics of Rolling Bearings