Professional Documents
Culture Documents
Coefficient k or Pre-Exponential
factor k0
The reaction rate coefficient k or pre-exponential factor k0 estimated per unit of
catalyst mass, volume or surface area to the units corresponding to the reaction
rates in [kmol/ (m3*s)] may be converted as described below:
1 In CSTR model the rate of reaction is assumed to be in [mole fraction / s]
or in [kmol/ (m3*s)]. The CSTR model does take into account directly the
mass, volume or surface area of the catalyst. If the user has the reaction
rate coefficient k or pre-exponential factor k0 estimated per unit of
catalyst mass, kg, catalyst volume, m3, or surface area, m2, these
values should be converted to the units per m3 of the reactor volume.
If the concentration of the reactants and products in the kinetic equation
for the reaction over the solid catalyst are in kmol/ m3 or kPa (this is the
typical case in industrial applications) then the transformation is
straightforward to multiply the given constant with the converting factor:
Wcat /V - if rate coefficient k or pre-exponential factor k0 estimated per
unit of catalyst mass,
Vcat /V - if rate coefficient k or pre-exponential factor k0 estimated per
unit of catalyst volume,
Scat /V - if rate coefficient k or pre-exponential factor k0 estimated per
unit of catalyst mass;
where,
V - reactor volume m3
Vcat - volume of catalyst in the reactor
Wcat - mass of catalyst in the reactor kgcat
Scat - catalyst surface area
1 The reaction rate coefficient k or pre-exponential factor k0 estimated per
unit of catalyst mass, volume or surface area to the units corresponding
to the reaction rates in [kmol/ (m3*s)] has one of the following units of the
reaction rate for the reaction over the solid catalyst: