You are on page 1of 3

RCN 200

Standalone level control unit

DESCRIPTIF
The unit is delivered
complete, with
instrumentation with
technical manual and
instruction manual
Bench is settled on a
frame with wheels
Conception,
manufacturing and
industrial material.
Input and output
components are connected
to 4 mm female
connectors.
Included supervision
software

SUGGESTED APPLICATIONS
Technical datas on components f or
control loop
Sensor - Controller Actuator
Disturbing element
PID ou auto adaptative
Controller conf iguration
Typical curves (level, valve opening )

Rvision A

RCN 200
Capacitif

24VAC
24VAC

Alarme 1
Alarme 2

VAR

Capacitive Level Sensor E NDRESS


HAUSER
Isolated steel shaft
Range : 0 - 600 mm
Output 4/20mA proportionate level
Feeding pump with variator
Centrifugal pump with stainless steel body
Flow valve adjustment in output
Electronic speed variator
Regulator PID Type with microprocessor
Accuracy scale : 0,2
Configurable scale range
Analogic display output 4/20mA
2 programmable output relays
Variable section Flow meter
Float flow meter
Scale 0 10 L/min
Linear graduated bushel disturbing valve
and flow linear graduated feeding setting
valve
The bench is equipped with synoptic table
like installation

1A

3A

1B

3B

2A

V-

2B

V+

Sensor and actuator signals are reported


on sockets on the diagram
The synoptic has also two 24VAC
supplies, two alarm indicators, one
indicator for pump condition and the input
and output sockets of indicator (see above
scheme) 230VAC-50Hz socket on the
electrical box side is provided to allow
connecting LABTAB computer
The bench is provided with feeding
polyethylene tray
The tank for trials : 37.5 liters
Pipes are translucent pressure PVC
Frame is made with aluminium sections
and 4 directional wheels with brakes.

UTILITIES
Electricit : 230 VAC mono-50Hz-1.5KW
Eau : 50L

DIMENSIONS
Length : 850 mm
Width : 700 mm
Height : 1600 mm
Weight
: 80 kg.

RCN 200
The unit is equipped with supervising and parameter setting software. The connection to the
computer is made by a standard USB port. The software is divided into 3 parts:
CONFIGURATION :
This part allows to access to controller
parameter directly via data explorer similar to
windows one.
The front face of the controller is displayed on
the computer screen and the operator can
activate the keys and controls as he was on
the driver.

TRENDS :
This part allows drawing trends with signals of
the controller. For example on this opposite
picture we can see the orders and the
measure in real time, it is possible to add other
parameters as the output of the signal... Datas
stocked during the drawing could be same to
an excel format file.

SUPERVISING :
This part is used to configure the controller and
display the parameters evolution.
A window is allocated to each loop. Each
window is laid out as indicated on the opposite
pictures :
- a synoptic diagram shows the used circuit
- a board group together parameters
(measure, orders, PID parameters, output
signal....)

Example of realized diagram

You might also like