You are on page 1of 4

Royal Commission Environmental Regulations-2010

RCER-2010,Volume II, Environmental Permit Program, Form PA-H2 Waste Management

PERMIT APPLICATION FOR AUTHORIZATION FOR WASTE


MANAGEMENT
1. NON-HAZARDOUS SOLID WASTE GENERATION AND DISPOSAL
If non-hazardous waste is generated, please fill the following
information (add additional rows if necessary)
Process/
Source

Type/
Name

Maximu
m
Quantity
(t/y)

Classificati
on1

Mode of
Transportati
on

Disposal/
Recycling
Method2

Disposal/
Recycling
Location

Municipal (e.g. office, canteen), inert, construction, waste


Disposal (landfilling), recycling or reuse, etc.

2. NON-HAZARDOUS INDUSTRIAL WASTE GENERATION


Process/
Source

Type/
Name

Maximu
m
Quantity
(t/y)

Physical
Form

Chemical
Compositi
on

Mode of
Transportat
ion

Disposal/
Recycling
Method1

Disposal/
Recycling
Location

1. Stabilization, Landfilling, Recycling or Reuse, etc.

3. HAZARDOUS WASTE GENERATION


If hazardous waste is generated, please fill the following information
(add additional rows if necessary)
Process/
Source

Type/
Name

Maximum
Quantity
(t/y)

Physical
Form

Chemical
Compositio
n

Hazard
Classificati
on1

Hazardous
Constituents

>>> Table continued

Mode of
Transportation

Disposal/ Recycling
Method2

Disposal/ Recycling
Location

H2-1
Facility: ______

Initials: ______

Royal Commission Environmental Regulations-2010


RCER-2010,Volume II, Environmental Permit Program, Form PA-H2 Waste Management

1. In accordance to the United Nations Chemical Hazard Classification


System
2. Disposal (incineration, stabilization/ Class II landfill, Class I landfill),
Recycling or Reuse etc.

4. INDUSTRIAL WASTE ANALYSIS DATA


Provide a detailed chemical and physical analysis of a representative
sample of hazardous substance or waste to be disposed at or by this
facility as required in the table below. (Published or documented data
on the hazardous substance or wastes can also be given).
Waste name

Physical
form & pH

Moisture
Chemical
Organic
content Composition * content,
%
%

Calorific
value,
kcal/kg

Volatiles
@100 oC

>>>>Table continued
TCLP
Test Results

Loss on Ignition
%

Hazardous properties and constituents* *


Heavy metals (Ba, Cd, Cr, Pb,
Hg, Ag,
As, Se, Cu, Fe, Mn, Ni, V)

* Proximate analysis
** Actual Hazardous constituents including metals
5.

WASTE HANDLING AND STORAGE


a. Provide following information for all wastes stored at the facility.
Waste name

Storage methods
(tanks/ drums/
surface
impoundments, etc)

Material of Number of
constructio units
n

Storage
capacity of
each unit

H2-2
Facility: ______

Initials: ______

Royal Commission Environmental Regulations-2010


RCER-2010,Volume II, Environmental Permit Program, Form PA-H2 Waste Management

b. Provide design and liner details of any surface impoundments used for
storing hazardous wastes
List the relevant section/ page numbers in the attachment

c. Provide a drawing showing the location of the waste handling and


storage area(s)
Drawing No. _________________
d. Provide a drawing showing design details of the waste handling and
storage area(s)
Drawing No. _________________
e. Provide details of secondary containment used to prevent overflow from
spills/ leaks around hazardous wastes storage areas.
List the relevant section/ page numbers in the attachment

6.

WASTE PRE-TREATMENT AND DISPOSAL

a. Provide the following information for each treatment technique and/ or waste/
substance treated
at the facility.
Waste name

Pretreatment
technique

Pretreatment
efficiency, %

Treatment
chemicals

Disposal
method

H2-3
Facility: ______

Initials: ______

Royal Commission Environmental Regulations-2010


RCER-2010,Volume II, Environmental Permit Program, Form PA-H2 Waste Management

b. Waste treatment facilities: Complete design, drawings and operational details


for all the treatment techniques/ processes employed at the facility.
List the relevant section/ page numbers in the attachment

Drawing No.

_________________
c.

Waste Disposal facilities: Complete design, drawings and operational


details for all the disposal methods employed at the facility
List the relevant section/ page numbers in the attachment

Drawing No. _________________

H2-4
Facility: ______

Initials: ______

You might also like