You are on page 1of 2

CLAUSE NO.

Quality Assurance

MEASURING INSTRUMENTS (PRIMARY AND


SECONDARY)
Material Test certificate

Hydro Test(R)

IBR Certification (if applicable )(R)

Insulation Resistance (R)

Test as per standard(R)

Calibration (R)

Process / Electrical connection (R)

ITEMS

Make, Model, Type, Rating (R)

TESTS

Dimensions (R)

MEASURING INSTRUMENTS (PRIMARY AND SECONDARY)

1. PR Gauge (IS-3624)
Y Y Y
Y Y
2. Temp. Gauge (BS-5235)
Y Y Y
Y Y
3. Pr./D.P.Switch(BS-6134)
Y Y Y
Y Y
Y
4. Electronic Transmitter(IEC- Y Y Y
Y Y
Y
770)
5. Temp. Switch
Y Y Y
Y Y
Y
6. Recorder(IS-9319/ANSI C- Y Y Y
Y Y
Y
39.4)
7. Vertical indicators
Y Y Y
Y
Y
8. Digital Indicators
Y Y Y
Y
Y
9. Integrators
Y Y Y
Y
10.
Electrical
Metering Y Y Y
Y Y
Y
Instrument
(IS-1248)
11. Transducer (IEC-688)
Y Y Y
Y Y
Y
12. Thermocouples (ANSI- Y Y Y
Y Y
Y
MC-96.1)
13. RTD(IEC-751)
Y Y Y
Y Y
Y
14. Thermowell
Y
Y
Y Y Y
R-Routine Test A- Acceptance Test
Y Test applicable
Note: 1) Detailed procedure of Burn-in and Elevated Temperature
test shall be as per Quality Assurance Programme in
General Technical Conditions
2) This is an indicative list of tests/checks. The manufacturer is
to furnish a detailed quality plan indicating the Practices and
Procedure adopted alongwith relevant supporting documents.

SIPAT Stage - II (2 x 500MW)


DM Plant, CW Treatment System
& Condensate Polishing Plant (CPU)
Package - (PART-II)

Bid Doc. No.:


CS-9545-138 (Part-II)-2

TECHNICAL
SPECIFICATIONS
SECTION VI, PART-B

Sub-Section - IIIE-03
MEASURING
INSTRUMENTS

Page 1 of 2

CLAUSE NO.

Y
*

17. Flow nozzle(BS-1042)

Y
*

18. Impact head type


element
19. Level transmitter/float
type switch
20. Flue Gas analyser
21. Dust emission monitors
*Calibration to be carried
out on one flow element of
each type and size if
calibration carried out as
type test same shall not be
repeated.

Y
Y

Y
Y

Y
Y

Y
Y

Material test certificate (A)

Hydro test (R)

IBR Certification as applicable (R)

Insulation Resistance (R)

Calculation for accuracy (R)

Calibration (R)

Non-destructive testing (R)

Process / Electrical connection (R)

ITEMS

WPS approval (A)

Make, Model, Type, Rating (R)

15. Cold junction


compensation box
16. Orifice plate(BS-1042)

TESTS

Requirement as per standard (R)

Dimensions (R)

Quality Assurance

Y
*
*
Y

Y
Y
*
*
Y

Y
*
*
Y

Y
Y

** If applicable
R-Routine Test
A- Acceptance Test
Y Test applicable
Note: 1) Detailed procedure of Burn-in and Elevated Temperature test shall be as per
Quality Assurance Programme in General Technical Conditions
2) This is an indicative list of tests/checks. The manufacturer is to furnish a
detailed quality plan indicating the Practices and Procedure adopted
alongwith relevant supporting documents.

SIPAT Stage - II (2 x 500MW)


DM Plant, CW Treatment System
& Condensate Polishing Plant (CPU)
Package - (PART-II)

Bid Doc. No.:


CS-9545-138 (Part-II)-2

TECHNICAL
SPECIFICATIONS
SECTION VI, PART-B

Sub-Section - IIIE-03
MEASURING
INSTRUMENTS

Page 2 of 2

You might also like