Professional Documents
Culture Documents
1.
2.
3.
4.
5.
6.
7.
8.
Version Information
System Requirements
Version Compatibility
Special Instructions
Documentation
Training
Customer Support
Legal Notices
=====================================
1 - Version Information
=====================================
Product: Intergraph Smart 3D PDS Model & Data Translators
(PDS_SP3DTRAN)
10-JAN-2014
3D
=====================================
2 - System Requirements
=====================================
For information regarding the hardware and software requirements for
PDS, please refer to the PDS 3D Project Setup Technical Reference Guide.
For information regarding the hardware and software requirements for
Smart 3D, please refer to the Hardware and Software Requirements
section of the Installation Guide.
------------------------------------///////// End of System Requirements
------------------------------------=====================================
3 - Version Compatibility
=====================================
For up-to-date information on the software compatibility of this product
in a standalone or integrated environment, please refer to the
Compatibility Matrix on the Intergraph PPM Support Web site at
http://crmweb.intergraph.com/.
Log on and perform the following steps:
1. Click the Service tab.
2. Click the Download Software Updates link.
3. On the Table of Contents page, click Products.
4. On the Product page under Compatibility Matrices (Now in Database
Format), click the 'PPM Compatibility Matrices Database' link.
5. On the PPM Compatibility Matrix - Product Report page, from the
Select the Product Code list, select <Product>.
6. From the Select the version list, select the desired version of
<Product>.
For information about authoring tool versions that work with a particular
version of SmartPlant Foundation, follow the same steps listed above
except select SPEnterprise in step 5.
Pre-requisites:
PDS Export and Smart 3D Import requires that the workstation have Microsoft
XML 6.0 or 6.0 SP1 installed. You may receive errors running the
PDS Export and Smart 3D Import utilities if this prerequisite is not
installed. Please see the Smart 3D Installation Guide for further details.
PD_Shell product, PDS Export Tools [Runtime].
Corresponding prerequisites for above are also required.
PDS Data Access Utility for use with Smart 3D
The setup will install files under ..\PDSHELL\PDExportToSp3D directory.
Setup will fail if PD_Shell is not found.
Piping Export
The node running Piping Export should have PD_DESIGN product loaded.
Equipment Export
The node running Equipment Export should have PD_EQP product loaded.
HVAC Export
The node running HVAC Export should have PEHVAC product loaded
and configured to run.
Electrical Export
The node running Electrical Export should have EE_RACEWAY product loaded
and configured to run.
Frameworks Plus Export
"SPExport" was certified to operate on the following software:
--------------------------------------///////// End of Version Compatibility
--------------------------------------=====================================
4 - Special Instructions
=====================================
To install this product, double click on the setup.exe file while in
File Explorer or File Manager. The setup will install the files under the
\PDSHELL\PDExportToSp3D directory.
Please see the Smart 3D Installation guide located in the Help
folder of the product media. It can also be found on a workstation with Smart 3D
product installed in the following location:
C:\Program Files (x86)\Common Files\Intergraph\Smart3D\Help
------------------------------------//////// End of Special Instructions
------------------------------------=====================================
5 - Documentation
=====================================
Use the Help menu to access the Help files and Printable Guides for this
product. To suggest a change or to ask a question about the documentation,
send an e-mail message to PPMdoc@intergraph.com
Printed documentation is not available for separate purchase.
The documentation is provided as .pdf files. To view the .pdf files, you
must install a .pdf Reader.
------------------------------------////////
End of Documentation
------------------------------------=====================================
6 - Training
=====================================
To register for training on Intergraph Process, Power & Marine products,
call Training Registration at (800) 766-7701 in the U.S. Outside the U.S.,
call (256) 730-5400 or contact your local Intergraph office.
For current information on training, use a World Wide Web browser to
connect to http://www.intergraph.com/training/.
------------------------------------/////////
End of Training
------------------------------------=====================================
7 - Customer Support
=====================================
For the latest Support Services information for this product, including
solutions to known software issues, use a World Wide Web browser to connect
to http://support.intergraph.com/.
To open service requests outside the U.S., please contact your local
Intergraph office.
------------------------------------/////////
End of Customer Support
------------------------------------=====================================
8 - Legal Notices
=====================================
Copyright
Copyright 1999-2014 Intergraph Corporation. All Rights Reserved. Intergraph
is part of Hexagon. Including software, file formats, and audiovisual displays;
may be used pursuant to applicable software license agreement; contains
confidential and proprietary information of Intergraph and/or third parties
which is protected by copyright law, trade secret law, and international treaty,
and may not be provided or otherwise made available without proper authorization
from Intergraph Corporation.
Portions of this software are owned by Spatial Corp. 1986-2012. All Rights Reser
ved.
U.S. Government Restricted Rights Legend
Use, duplication, or disclosure by the government is subject to restrictions as
set forth below. For civilian agencies: This was developed at private expense an
d