Professional Documents
Culture Documents
Dura Face
External Skeletal Fixation Half-pins
™ Patent Pending TRO
(tapered runout)
Technology
The DuraFace™ fixation half-pin achieves these very significant improvements at the same price of our
current positive-profile half-pins. These huge mechanical improvements are accomplished by starting
with the positive-profile pin geometry, adding shaft diameter, and blending the thread/non-thread
junction with a patent pending tapered thread runout (TRO) feature to minimize any stress riser effect.
Newtons/mm
• 55% Increase in average pin stiffness 158
*data submitted for publication
503
• 54% Increase in average pin ultimate strength
100
• 2.3-4.9 fold increase in cyclic fatigue life
13.95
Ultimate Cycles to
Stiffness Strength Failure
IMEX™ is a trademark of IMEX™ Veterinary, Inc. Copyright © 2010. IMEX™ Veterinary, Inc. All rights reserved. PD 02/12/10
Dura Face Pin Sizes and Ordering Information
™
* L = Extended Length
Actual thread length appears 1/10” (2-3mm) longer to allow for tapered run-out (TRO) feature