Professional Documents
Culture Documents
FUNCTIONALITIES
Available no. 7 calculation modalities: fluid-fluid, condensation inside tubes, condensation outside tubes, evaporatCalculation
modality
ing inside tubes, flooded evaporator, steam inside tubes and steam outside tubes
Available no. 5 calculations typologies:
- Free calculation: you have to specify all the exchangers dimensional parameters from scratch
- Calculation with plate from archive: you have to specify only the shell parameters. The plate will be taken from the
archive
Calculation
typologies
- Verify heat exchanger: you just verify an exchanger from the archive
- Selection with plate from archive: it uses the plates from the archive to perform a selection, designing a new exchanger each time, suitable with the customer requirements
- Heat exchangers selection: it selects an exchanger suitable with the customer requirements
In Free calculation and Calculation with plate from archive, the user can choose:
- Verify: the user can rate the capacity and the pressure drops, knowing all the geometrical parameters of the exchanger and work conditions, changing one or more input data at the same time (for example: fluid flow, fluid, plate
type, tube type, fluid temperatures, etc)
- Design: it is possible to insert the work conditions and the capacity required, without knowing all the geometrical
Calculation
parameters, to build the best exchanger for the required capacity
modes
- Design from scratch: allows the complete design of a brand new exchanger from scratch. In case you need to
design a special exchanger and you lack the time to use a complex software, and set all the parameters, with our
software you just have to select the fluids, set the working conditions and the required capacity, click on the
Automatic calculation box and you are done. With this new feature you can just type the required capacity and
click a button, and then the software will design a brand new exchanger without any dimensional parameter set in.
This lets you design a special exchanger, that perfectly matches the requirements of the customer, in just no time
Possibility to set, edit and erase the customers data, geometries, connections, plates, exchangers, materials, fluids
Archive
and drawings
Management
Possibility to save an exchanger already rated in database and create new series
The user is able to manage the geometrys data (tubes) with the possibility to add new ones
Complete management of geometrical features: tubes (smooth, grooved, radial finned)
Geometries
Advanced management of the tube archive with customizable equations
Added Wolverine and Wieland tubes (some models)
The user is able to manage the materials data with the possibility to add new ones, specifying and inserting the
Materials
following information: Thermal Conductivity (W/m*K) and the Density (kg/m3)
Possibility to use the archive or add new ones
Fluids
The user has the possibility to test the fluids, with charts and/or tables
Available no. 3 printout templates: Brief printout (technical data), detailed printout (further technical data) and TEMA printout (according with TEMA norms)
Printouts
Possibility to export printouts in the formats PDF, Excel, Word
Possibility to print the drawing and export in the formats PDF, Excel, Word
Drawings
Possibility to add new drawings and to specify manually the quotes
Possibility to design the plan of the plate automatically with the maximum number of tubes possible in the plate
Possibility to delete manually some tubes and modify some information directly on the drawing (like the tube disposition and the plate configuration) so the drawing will update automatically
Plate drawing
Possibility to save the modified data from the drawing to the calculation
Drawings can be exported into AutoCad (DXF)
Complete automized drawing of the heat exchanger (in according to TEMA type)
Possibility to choose the item visible (shell, baffles, tubes, plate, front end, ecc)
CAD 3D
Drawings can be exported into AutoCad (STL, DWG, EMF, STEP, IGES)
Unit of
Possibility to choose or modify the system: SI, Imperial, Custom, Technical
measurement
Correction
These correction factors align the softwares results (with approximation margin) with experimental data
factors
Projects
Calculations can be saved in files of small dimensions and it is possible to restore them
archive
English, Italian, German, French, Spanish, Russian and Chinese
Other languages on request with additional cost
Languages
Unicode support for non Latin alphabets
Logo
Logo and company data linked to the main brand of the company
Technical
Only to customers with regular subscription of maintenance contract, which covers a maximum of n 3 technical
support
licenses. Automatic renewal
Activation
Digital download An internet connection is required for both installation and activation. Further accesses to the
modality
internet connection may be required while using the software
System
Operating System Microsoft Windows Vista, 7 and 8 32 or 64 bits
requirements
Book a demonstration online at:
bit.ly/unilabdemo
bit.ly/unilabyoutube
Follow us on:
bit.ly/unilablinkdin