Professional Documents
Culture Documents
Corporate
Headquarters
7909 Parkwood Circle Drive
Houston, Texas 77036
United States
Phone: 713 375 3700
Fax: 713 375 3994
MISSION
CENTRIFUGAL
PUMPS
Magnum, 2500 Supreme, Magnum XP, Magnum Vor tex, Sandmaster
Germany
Eddesser Strasse 1
Edemissen, Niedersachsen 31234
Germany
Phone: 49 5176 9767 Ext. 0
Fax: 49 5176 9767 Ext. 22
Indonesia
Jakarta Stock Exchange Building
Gedung Bursa Efek Jakarta
Tower 1, 28th floor
Jl. Jendral Sudirman Kav 52-53
Jakarta, 12190
Indonesia
Phone: 62 21 515 9886
Fax: 62 21 515 9878
Netherlands
Gooiland 12
Beverwijk, 1948 RC
The Netherlands
Phone: 31 251 240504
Fax: 31 251 250954
Norway
Korsvikfjorden Industriomrde
N-4639
Kristiansand, Vest-Agder
Norway
Phone: 47 38 192000
Fax: 47 38 192311
Lagerveien 8
N-4033
Stavanger, Rogaland
Norway
Phone: 47 51 818181
Fax: 47 51 800547
Russia
5 Ulansky Pereulok
3rd Floor
Moscow, 101000
Russian Federation
Phone: 7 495 775 2540
Fax: 7 495 981 3470
Scotland
Suite 12 Kirkton Avenue
Pitmedden Estate
Aberdeen, AB21 0BF
Scotland
United Kingdom
Phone: 44 1224 343610
Fax: 44 1224 724142
Singapore
13 Kwong Min Road
Singapore, 628717
Singapore
Phone: 65 6513 3640
Fax: 65 6266 6471
Venezuela
Avenida 68 con Calle 158
Ampliacion Zona Industrial
Il Etapa
Municipio San Francisco, Zulia
Venezuela
Phone: 58 261 7362636
Fax: 58 261 7362950
Dubai
Nr. R/A 13, Daimler Chrysler Street
Plot MO 0682
Jebel Ali Free Zone
Dubai
UAE
Phone: 971 4 8838776
Fax: 971 4 8838795
National Oilwell Varco has produced this brochure for general information only, and it is not intended
for design purposes. Although every effort has been made to maintain the accuracy and reliability of its
contents, National Oilwell Varco in no way assumes responsibility for liability for any loss, damage or
injury resulting from the use of information and data herein. All applications for the material described
are at the users risk and are the users responsibility.
All brands listed are trademarks of National Oilwell Varco.
www.nov.com/centrifugalpumps
2011 National Oilwell Varco
0001-0567-90 Rev. D
MISSION PRODUCTS
The Evolution
2-14
15-18
Shear Pumps
19-20
21-26
27-45
Dimensional Data
46-51
Piping Recommendations
52-53
Related Equipment
54-55
56
Conversion Table
57
The pictures, photographs, charts, diagrams, drawings, written comments and specifications contained herein are not to
be construed as giving rise to any warranty on the part of Mission, a product of National Oilwell Varco. Mission makes no
warranty, either expressed or implied, beyond that stipulated in the Mission Standard Terms and Conditions of Sale.
MISSION PRODUCTS
Concentric
Casing
Heavy-Duty Shaft
Volute
Casing
MISSION PRODUCTS
Olympia Double
Mechanical Seal
! Shaft packing
All parts are properly packaged to protect the equipment during shipping. The material is clearly marked to ensure our
customers are getting OEM manufactured parts and allow packers and service hands to confirm they have the correct
equipment without having to open the packaging and expose the equipment to external elements.
National Oilwell Varco is dedicated to providing a full line of products to meet the needs of our customers. Realizing
customer needs and priorities may differ, National Oilwell Varco provides two separate pump lines with like operating and
dimensional characteristics. Following are the unique features of the Magnum and 2500 Supreme.
Magnum*
2500 Supreme*
Open impeller design that lowers axial thrust loads and is equipped with an
impeller retention bolt to ensure the pump is not damaged if run in reverse.
(Impeller retention bolt is not available on 3x2x13 models.)
Semi Open impeller design that reduces the amount of solids that enter the
stuffing box extending the life of the mechanical seal or packing and the life of the
stuffing box. (Available on 5x4x14 10x8x14 models.)
Lip seals and exclusion seal to retain lubricants and protect bearings from
external contamination
Fluid end parts available with Magnachrome corrosive and abrasive resistant
material. Magnachrome impellers have a 400 Brinell hardness and
Magnachrome casings and stuffing boxes feature a 600 Brinell hardness.
Fluid end parts available with Supreme Hard material that has a 400 Brinell
hardness. The standard impeller, casing wear pad and stuffing box are Ductile Iron
to ensure even wear characteristics.
Casing provided with replaceable casing wear pad on 4x3x13 10x8x14 models.
* The Magnum and 2500 Supreme are available through select distributors.
MISSION PRODUCTS
Magnum Features
1
3
4
5
6
7
8
9
8
Qty Catalog Number
1
See Below
1
10399-46-1
12
3932-61
12
3862-76
1
8505-04-01
1
8505-04-01
1
See Below
1
19110-72
1
1
1
22223-01-30
1
20614-01-30
2
3861-117
1
19368-01
1
20622A
1
22451-1
1
25014-04M-B
2
B3701A
1
20612-02-33
1
20943-21
1
20613-21G-7A
1
4372-5-21
1
23444-01-72
1
22210-1A
1
20618-12-1
1
8505-05
1
18471
1
8505-05
1
8267-01
1
8478-3
1
A 662014131
3
2538-1H
1
20626
1
20625
1
20619-01
2
3861-1
644303109
648408706
648408300
601407505
Part #
See Below
648403012
648402014
648401115
86485503
646400507
See Below
648405082
7300239
7415648
641116157
643365042
648401016
601499403
641103338
648414308
661007005
601102494
646490557
641102182
641102181
601212392
648415156
641116108
644302499
601474737
648403608
601474737
601473689
601174584
662014131
Description
Material
Casing
Hard Iron
Gasket, Casing
Vellumoid
Nut, Casing
Stl
Stud, Casing
Stl
Plug, Casing Drain
Stl
Plug, Flush Line
Iron
Impeller
Hard Iron
Seal, Impeller
Viton
Washer, Impeller
Stl
Bolt, Impeller Lock
Stl
Stuffing box, Mech. Seal
Hard Iron
Stuffing Box, Packed
Hard Iron
Bolt, Stuffing box
Stl
Grease Fitting
Stl
Gland Assy., Packing
Bronze
Seal, Mechanical
Tungsten Carbide
Packing, Shaft
Graphite/Acrylic
Bolt Assy, Gland
Stl
Shaft
AISI 4140
Sleeve, Shaft (M.S. Pump)
416SS
Sleeve, Shaft (Pack Pump) 416SS/Ceramic
Key, Shaft
416ss
Seal, Shaft Sleeve
Viton
Deflector Assembly
Bronze
Frame, Grease Lubricated
Cast Iron
Plug, Oil Drain
Iron
Plug, Oil Fill
Iron
Plug, Frame Drain
Iron
Breather
Stl
Oiler Assembly
Dip Stick
Stl
Bolt, Casing Jack
Stl
Cover, Inboard Bearing
Iron
Gasket, I.B. Brg. Cover Vegetable Fiber
Oil Seal, I.B. Brg. Cover
Buna-n
Bolt, I.B. Brg. Cover
Stl
Material
Stl
Buna-n
Stl
Stl
Vendor
Iron
Buna-n
Stl
Stl
Iron
Stl
Buna-n
Buna-n
Stl
Vendor
Stl
Stl
Hard Iron
Hard Iron
Hard Iron
Hard Iron
Hard Iron
Hard Iron
Hard Iron
Hard Iron
Hard Iron
Hard Iron
Hard Iron
Hard Iron
Hard Iron
Hard Iron
Hard Iron
Hard Iron
Description
Nut, I.B. Brg. Cover
Exclusion Seal, I.B. Brg. Cvr.
Grease Fitting
Grease Fitting
Bearing, Inboard
Housing, O.B. Bearing
Seal, O.B. Brg Housing
Bolts, O.B. Brg. Housing
Nut, O.B. Brg. Housing Jam
Cover, O.B. Bearing
Grease Zerk, O.B. Brg. Cvr.
O-ring, O.B. Bearing Cover
Oil Seal, O.B. Brg. Cover
Bolt, O.B. Brg. Cover
Bearing, O.B. (2 Req'd)
Lockwasher, O.B. Bearing
Lucknut, O.B. Bearing
Casing, 3x2x13
Casing, 4x3x13
Casing, 5x4x14
Casing, 6x5x11
Casing, 6x5x14
Casing, 8x6x11
Casing, 8x6x14
Casing, 10x8x14
Impeller, 3x2x13
Impeller, 4x3x13
Impeller, 5x4x14
Impeller, 6x5x11
Impeller, 6x5x14
Impeller, 8x6x11
Impeller, 8x6x14
Impeller, 10x8x14
XX - Impeller Code - First X equals diameter of impeller in inches minus 4. Therefore 10" = 6, 9"= 5,8"=4, etc 14" use letter A.
Second X equals fractional data in 1/8's. Therefore 1/8" = 1, 1/4" = 2, 1/2" = 4, etcThus a 10.5" impeller is coded as 64, a 12" impeller is coded as 80, a 13.25"
impeller is coded as 92 etc.
Notes:
* - Casings, Impellers and Stuffing Boxes are also available as Stainless Steel, Aluminum Bronze or Magnachrome - See local dealer for Part Numbers.
# - Used for pumps equipped with mechanical seal only.
& - Used for pumps equipped with packing only.
! - Used for oil lubricated pumps only.
~ - Packing available in various materials - standard material shown
Item
1*
1A
1B
1C
1D
1E
2*
2A
2B
2C
3*#
3*&
3A
3B&
4
5A#
5A~
6
7
7A#
7A&
7B
7C
8
9
9A!
9B!
9C
9D
9E
9F!
9G
10A
10B
10C
10D
Magnum Centrifugal
MISSION PRODUCTS
10
Qty
1
1
12
12
1
1
1
1
1
1
2
1
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
2
1
1
N/A
H8267-1
H2565-1
H2539-3
H2538-1
H17950
H20625
H2564-4
H3861-1
Catalog Number
See Below
10399-46-1
3932-61
H2507-3
See Below
8505-2H
See Below
H19110-72
H22223-01-30
H20614-01-30
H3861-117
19368-1H
H20622A
H22451-1A
8264-24-OB
20629
H20612-02-33
H20613-21A
H20613-21G-7A
H4372-5-21
23444-01-72
22210-1A
H17444
H8505-1
8505-2H
Part #
See Below
648403012
3932-61H
648401115
See Below
601474703
See Below
648405082
22223H
20614H
3861-138
19368-1H
20622H
22451K
648402600
601102494
646490557
646492505
646490656
601212392
648415156
641116108
17444H
8505-1
601474703
601474737
601473689
2565-1H
2539-3H
2538-1H
17950H
648408706
2564-4H
3861-1H
661010033
661009010
Description
Casing, Includes 1 thru 1E
Gasket, Casing
Nut, Casing
Stud, Casing
Stl
AISI 4140
416SS
416SS/Ceramic
416ss
Viton
Bronze
Cast Iron
Iron
Iron
Iron
Stl
Plastic
Stl
Stl
Iron
Vegetable Fiber
Buna-n
Stl
Stl
Vendor
Stl
Hard Iron
Viton
Ductile Hard Iron
Ductile Hard Iron
Stl
Stl
Stainless Steel
Tungsten Carbide
Material
Hard Iron
Vellumoid
Stainless Steel
Stl
Hard Iron
Hard Iron
Hard Iron
Hard Iron
Hard Iron
Hard Iron
Hard Iron
Hard Iron
Material
Buna-n
Stl
Stl
Ductile Iron
Stl
Buna-n
Buna-n
Stainless Steel
Vendor
Stl
Stl
XX - Imp. Code - First X equals diameter of impeller in inches minus 4. Therefore 10" = 6, 9"= 5, 8"=4, etc14" use letter A. Second X equals frational data in 1/8's.
Therefore 1/8" = 1, 1/4" = 2, 1/2" = 4, etcThus a 10.5" impeller is coded as 64
Notes:
* - Casings, Imp. & Stuff Boxes are available as Supreme Hard or Aluminum Bronze
# - Used for pumps equipped with mechanical seal only.
& - Used for pumps equipped with packing only.
! - Used for oil lubricated pumps only.
~ - Packing available in various materials - standard material shown
Item
1*
1A
1B
1C
1D*
1E
2*
2A
3*#
3*&
3A
3B&
4
5A#
5B~
6
7
7A#
7A&
7B
7C
8
9
9A!
9B!
9C
9D
9E
9F!
9G
10A
10B
10C
10D
10E
11
2500 Supreme
MISSION PRODUCTS
11
MISSION PRODUCTS
Pump
Size
3x2x13
4x3x13
5x4x14
6x5x11
6x5x14
8x6x11
8x6x14
10x8x14
Base
Companion
Flange (1)
662014044
662014043
662014042
662014041
662014041
662014040
662014040
3
Casing Assy.
H.I. (1)
Includes
studs, nuts,
and gasket
641101753
641101902
641102058
641101456
641101605
641102157
641101308
641102322
9B
9A
10
12
16
17
Suction
Elbow (1)
665002001
665002002
665002003
665002004
665002004
665002005
665002005
Suction
Flange Nut
601408552
601408552
648402014
648402014
648402014
648402014
648402014
Suction
Flange Stud
601408305
601408305
648401115
648401115
648401115
648401115
648401115
Suction
Flange
Gaskets (2)
601475189
601475346
601475254
601475338
601475338
601475320
601475320
Base
Flange Nut
601408552
601408552
601408552
601408552
601408552
601408552
601408552
601408552
Base
Flange Stud
601208285
601208285
601208285
601208285
601208285
601208285
601208285
601208285
27
30
31
Shaft Sleeve
Set Screw
(6)
75634012
75634012
75634012
75634012
75634012
75634012
75634012
75634012
75634012
75634012
75634012
75634012
Motor
Adapter
Studs (4)
601408412
601408412
601408412
601408305
601408305
601408305
601408305
601408305
601408305
601408305
601408305
601408305
Motor
Adapter
Nuts (4)
658404702
658404702
658404702
658404702
658404702
601408552
601408552
601408552
601408552
601408552
601408552
601408552
Not Shown
Adapter
Frame (444
and 445
only)
Quantity
1
1
12
12
1
1
1
1
1
1
2
1
8
1
1
2
Part Number
662014039
648414308
648401115
648402014
648403012
643367048
662010054
Contact Factory
641103338
661007023
601102494
648405082
601482417
646400507
*
648401016
Description
Pump-Base
Mechanical Seal
Casing studs
Casing Nuts
Casing Gasket
Mech Seal Stuffing Box
Impeller Retention Bolt
Electric Motor
Packing Gland
Back-up Packing
Gland Bolts
Impeller O-ring
Set Screw
Casing Drain plug
Anti-Spin Bolt Washer
Stuffing Box Bolts
Item #
14
Motor
Frame
215JP
254JP
256JP
284JP
286JP
324JP
326JP
364JP
365JP
404TCZ
405TCZ
444TCZ
Motor Frame
Adapter (1)
662014045
662014045
662014045
662014055
662014055
662014055
662014055
662014055
662014055
662014055
662014055
662014055
Motor Shaft
Sleeve (1)
662013009
662013009
662013009
662013009
662013009
662013009
662013009
646492505
646492505
646492505
646492505
646492505
21
Shaft
Sleeve
Shim
(1)
662014218
662014218
662014218
662014218
662014218
662014218
662014218
662014218
662014218
662014218
662014218
662014218
662014057
12
13
MISSION PRODUCTS
SANDMASTER PUMPS
14
15
MISSION PRODUCTS
VORTEX PUMPS
The VORTEX centrifugal pump offers proven
performance of the MAGNUM I adapted with a
concentric vortex casing. The VORTEX also features
identically sized suction and discharge flanges, and a
high performance vortex designed impeller.
The vortex impeller produces a smooth hydraulic
whirlpool of fluid in front of the impeller creating a
vacuum. Fluid circulates through the casing with minimal
fluid passing through the impeller. This smooth action
increases fluid velocity and pressure while minimizing
turbulence resulting in reduced particle degradation.
Solids smaller than the discharge flow easily, without
clogging.
MAGNUM XP PUMPS
The MAGNUM XP is ideally suited for pumping high
volumes of heavy slurries that are abrasive, corrosive, or
just plain tough to pump. The MAGNUM XP 8x6x18,
12x10x23 and 14x12x22 can deliver flow rates up to
7500 GPM and head pressures up to 540 feet.
The compact overall dimensions of the MAGNUM XP
make it an excellent choice for high volume mobile and
stationary applications where a small footprint is critical.
The MAGNUM XP is designed for continuous operation
with minimal maintenance. The low stuffing box pressure
and extra-heavy shaft design are engineered to provide
maximum seal life. The unique casing flow divider on the
12x10x23 and 14x12x22 cuts the radial load in half,
doubling bearing life. The heavy-duty bearings are
permanently lubricated to minimize maintenance.
16
17
MISSION PRODUCTS
Shear Pumps
TurboShear System
National Oilwell Varco's TurboShear System reduces the
cost of mixing polymers and clays while improving mud
properties. Shearing the polymers eliminates fish eyes and
prevents polymer chaining (long strings), which cannot pass
through shaker screens. Pre-hydrating clays improves
viscosity per pound of clay, reduces water loss and
improves filter cake properties. Additionally, the TurboShear
System can be used to dissolve salt and mix oil-base fluids.
2
3
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
18
Description
Qty.
Casing, 14X12X22
1
Casing, 12x10x23
Casing, 8x6x18
Nut, Casing
32
Stud, Casing (14 X 12 and 12 X 10 ) 32
Stud, Casing ( 8 X 6 )
16
Stud, Casing ( 8 X 6 )
16
Gasket, Casing (14x12x22)
2
Gasket, Casing (12x10x23)
Gasket, Casing (8x6x18)
Cover, Front (14x12x22)
1
Cover, Front (12x10x23)
Cover, Front (8x6x18)
Impeller, 14x12 Clockwise Rot. 22"
1
Impeller, 12x10 Clockwise Rot. 23"
Impeller, 8x6 Clockwise Rot. 18"
Seal, Impeller Nose
1
Key, Impeller
1
Nose, Impeller ( Hex Design)
1
Nose, Impeller (Two Flat Design)
Nose, Impeller (2 Flat Ion Nitride)
Screw, Set
1
Jam Nut
1
Seal, Impeller
1
Mechanical Seal (Crane Type)
1
Stuffing Box, Mech. Seal (14 X 12)
1
Stuffing Box, Mech. Seal (12 X 10)
Stuffing Box, Mech. Seal (8 X 6)
Bolt, Stuffing Box
2
Sleeve, Shaft
1
Seal, Sleeve
1
Slinger
1
Seal, Slinger
1
Oil Seal, Inboard Bearing
2
Bearing, Inboard
1
Frame
14 X 12
1
Frame
12 X 10
Frame
8X 6
Housing, Bearing
1
Seal, Bearing Housing
1
Catalog Number
24022-01-30A
25008-01-30A
25289-02-30A
3932-61
3862-86
3862-90
3862-92
10399-55-01
25012-01-01
25012-02-05
24021-01-30
25009-01-30
25291-02-30
24024-X0-HS
25010-Y0-30
25292-T0-30
7496-158
4372-29-21
24025-04-25L
24025-01-25L
24025-03-25L
14430-19
24026-25L
7496-153
24036
24027-01-30
24027-02-30
25290-02-30
3861-117
24029-21BZ
7496-234
24030-01-13
7496-238P
20619-03
20615-2
24031-01-01
24031-02-01
25293-02-01
24032-01-01
7496-272
Part Number
651120206
662001001
662002089
648402014
658403308
601208285
648401118
658410501
661010001
662010032
654310309
662014003
662014129
662005003
662005002
662005018
658408109
658405006
652309601
652309600
662014054
658411400
658414255
658408059
658416102
653322305
662014002
662014128
648401016
656422201
658408505
654311604
658408554
658413604
658413000
654312008
662014001
662014130
654313006
658408901
Item #
25
Description
Qty.
Bearing, Outboard ( 14 X 12 )
1
Bearing, Outboard(12 X 10 and 8 X 6) 2
26
Seal, Bearing Cover
1
27
Lock Washer
1
28
Lock Nut, Bearing
1
29
Oil Seal, Bearing Cover
2
30
Drive Screws
6
31
Nameplate
1
32
Shaft
1
33
Key, Coupling
1
34
Cover, Bearing
1
35
Bolts, Bearing Cover
2
36
Washer, Bearing Cover
2
37
Nuts, Bearing Housing
2
38
Bolt, Bearing Housing
4
39
Washer, Flat
2
40
Bolt, Packing Gland
2
41
Gland, Packing Half
2
42
Packing Set
1
43
Screw, Cap
2
44
Plug, Grease
1
45
Breather
1
46
Plug, Fitting
1
58
Plug, Pipe
2
59
Plug, Pipe
1
60
Tag, Mechanical Seal
1
Packed Split-Box and Wearplate
47
Wearplate, Split Box
1
48
Packing Set
1
49
Nut and Washer Assembly
2
50
Bolt, Split-Box
2
51
Stuffing Box, Split
2
52
Latern Ring Half
2
53
Fitting, Grease
1
54
Screw, Cap
2
Auxiliary Tools
55
Tool, Impeller Nose and Nut
1
Tool, Impeller Nose (HEX)
56
Tool, Impeller Removal
1
57
Tool, Shaft Holder
1
Catalog Number
20616-2
20616-3
7496-267
6124-6
6123-6
20619-04
12530
23017
24028-33
4372-30-21
24033-01-01
3861-139
3936-19-L8
3932-62
3861-138
3936-19-L8
3861-165
24034-01-13
8264-344-K
3909-04-87
8505-1
8267-1
19368
8505-02-01
8505-06-01
22566
Part Number
658413307
661009001
658408802
658407002
658406509
658413638
601482417
601501505
656420007
658405055
654314004
648401081
648402030
626402702
648401057
648402030
601408289
654315100
658409503
658404207
601474695
601473689
661010020
658409859
658410006
603445727
24023-01-XX
8264-345-K
22216-02
3861-168
24037-01-87
24039-13
19368-01
3909-13-87
654310507
658409552
658413935
1/2-13x4 lg Gr 5
654317007
658418207
601499403
658404405
24040
Standard Hex Socket
24041
24042
658420203
4.
5.
6.
Available Sizes:
6x5
8x6
658420252
658420302
19
MISSION PRODUCTS
20
4.
4.1
4.2
4.3
4.4
into
GPM
GPM
GPM
GPM
GPM
Gallons
PSI
Gallons
Feet
PSI
SpGr.
multiply by
4.4
264
0.264
15.9
0.02917
7.481
14.223
264
3.28
14.7
1
21
MISSION PRODUCTS
Affinity Laws
Example 2:
CONDITIONS
or
Horsepower:
HP1
=
HP2
or
RPM1
RPM2
TDH1
TDH2
HP1
HP2
Dia1
Dia2
Dia1
Dia2
GPM1
GPM2
or
X
95
Type
Elbow
Tee Running
Tee Branched
Swing Check
Globe Valve
Butterfly Valve
22
______
______
______
______
______
______
x
x
x
x
x
x
1000
500
2.
=
=
=
=
=
=
(1d) x Head Loss (Ref. Table on page 24) = ____feet of head (friction loss)
100
Elbow
Tee Running
Tee Branched
Swing Check
Globe Valve
Butterfly Valve
Qty.
______
______
______
______
______
______
x
x
x
x
x
x
=
=
=
=
=
=
or 48 * 1.177 = X or 56 HP = X
(2a) Vertical Distance (centerline of pump to highest point in discharge system +/-) _______ feet.
or 1.0566 * 11 = X or 11.62" = X
Qty.
Answers:
____________ DIA
____________ GPM
____________ HP Required
New Imp Dia:
115 =
X
103
11
Suction:
Specific Gravity
(1a) Vertical Distance (liquid surface to pump center line+/-). Positive number if above pump center line or negative
number if below pump center line _______________ feet.
Friction loss 1
Friction loss 2
(2d)
100
x Head Loss (Ref. Table on page 24) = ____feet of head (friction loss)
3.
Pressure required at discharge point _____________ psig x 2.31 = ____________ feet of head.
Sp.Gr.
5.
6.
Total Head Required at Pump Discharge = Hf + He + line 3 = ______________ feet of head required.1
NOTE: NPSHa must also be considered. See previous pages for NPSHa calculation method.
23
MISSION PRODUCTS
V
F
2" PIPE
3.06
3.69
4.08
6.40
5.11
9.90
6.13 13.40
7.15 17.04
8.17 22.50
9.19 28.00
10.21 35.80
12.76 50.90
15.32 76.00
17.86 92.50
20.40 129.00
V
F
3" PIPE
1.36
0.53
1.81
0.91
2.27
1.38
2.72
1.92
3.18
2.56
3.63
3.28
4.08
4.08
4.54
4.96
5.68
7.50
6.81 10.50
7.95 14.00
9.08 17.90
10.20 22.30
11.30 27.10
12.50 32.30
13.60 37.90
15.90 50.40
18.20 64.60
C=100
V
F
4" PIPE
0.77 0.13
1.02 0.22
1.28 0.34
1.53 0.48
1.79 0.63
2.04 0.81
2.30 1.01
2.55 1.22
3.19 1.85
3.83 2.59
4.47 3.44
5.10 4.41
5.74 5.48
6.38 6.67
7.02 7.96
7.65 9.34
8.93 12.40
10.20 15.90
11.50 19.80
12.80 24.10
14.00 28.70
15.30 33.70
16.60 39.10
17.90 44.90
18.90 51.30
Values of C
V
F
5" PIPE
0.82
0.98
1.14
1.31
1.47
1.63
2.04
2.47
2.86
3.27
3.68
4.08
4.50
4.90
5.72
6.54
7.36
8.18
8.99
9.81
10.60
11.40
12.30
13.10
14.70
16.30
18.00
19.56
21.19
22.82
24.45
0.11
0.16
0.21
0.27
0.34
0.41
0.62
0.87
1.16
1.49
1.85
2.25
2.68
3.13
4.20
5.38
6.68
8.12
9.69
11.40
13.20
15.10
17.20
19.40
24.10
29.30
35.00
41.20
48.00
54.80
62.40
V
F
6" PIPE
0.79
0.91
1.02
1.14
1.42
1.70
1.99
2.27
2.55
2.84
3.12
3.41
3.97
4.54
5.10
5.68
6.24
6.81
7.38
7.94
8.51
9.08
10.20
11.40
12.50
13.60
14.80
15.90
17.00
18.20
20.52
22.80
0.09
0.11
0.14
0.17
0.26
0.36
0.48
0.61
0.76
0.93
1.11
1.30
1.73
2.21
2.75
3.34
3.99
4.68
5.43
6.23
7.08
7.98
9.92
12.10
14.40
16.90
19.60
22.50
25.50
28.80
35.90
43.60
V
F
8" PIPE
0.96 0.09
1.12 0.12
1.28 0.15
1.44 0.19
1.60 0.23
1.76 0.27
1.91 0.32
2.23 0.43
2.55 0.55
2.87 0.68
3.19 0.82
3.51 0.98
3.82 1.15
4.15 1.34
4.47 1.53
4.78 1.74
5.10 1.97
5.74 2.44
6.38 2.97
7.02 3.55
7.66 4.17
8.30 4.83
8.93 5.54
9.55 6.30
10.20 7.10
11.50 9.83
12.80 10.70
GPM
30
40
50
60
70
80
90
100
125
150
175
200
225
250
275
300
350
400
450
500
550
600
650
700
750
800
900
1000
1100
1200
1300
1400
1500
1600
1800
2000
24
RANGE: High =
best, smooth, well laid
Low =
TYPE OF PIPE
poor or corroded
Cement - asbestos
160-140
Fibre
Bitumastic-enamel-lined iron or steel centrifugally applied
160-130
Cement lined iron or steel centrifugally applied
Copper, brass, lead, tin or glass pipe and tubing
150-120
Wood-stave
140-110
Welded and seamless steel
150-80
Continuous-interior riveted steel (no projecting rivets or joints)
Wrought iron
150-80
Cast-iron
150-80
Tar-coated cast iron
145-80
Girth-riveted steel (projecting rivets in girth seams only)
Concrete
152-85
Full-riveted steel (projecting rivets in girth and horizontal seams)
Vitrified
Spiral-riveted steel (flow with lap)
Spiral-riveted steel (flow against lap)
Corrugated steel
Table Correction Multipliers
Value of C
Multiplier to correct tables
130
0.63
120
0.71
110
0.84
Average
value for
good, clean
new pipe
150
150
148
150
140
120
140
139
130
130
130
130
120
115
110
110
100
60
100
1.00
90
1.22
80
1.58
Commonly
used value
for design
purposes
140
140
140
140
130
110
100
100
100
100
100
100
100
100
100
100
90
60
70
1.93
80
1.58
70
1.93
60
2.57
25
Temperature
C
4.4
10
15.6
21.1
26.7
32.2
37.8
43.3
48.9
54.4
60
65.6
71.1
76.7
82.2
Specific
Gravity
1.001
1.001
1.000
0.999
0.998
0.996
0.994
0.992
0.990
0.987
0.985
0.982
0.979
0.975
0.972
Vapor Pressure of
water, absolute (feet)
0.30
0.40
0.60
0.80
1.20
1.60
2.20
3.00
4.00
5.20
6.80
8.80
11.20
14.20
17.90
The head vs. flow curves on the following pages give you the
performance of the Magnum, 2500 Supreme, Magnum Vertical,
2500 Vertical and Sandmaster pumps at various speeds and with
various impeller sizes. The horsepower (HP) rating is based on
pumping water with a specific gravity of 1.0. The flow is measured
in US liquid gallons per minute (GPM). The total differential head is
measured in feet. There are also a series of Efficiency and Net
Positive Suction Head Required (NPSHr) lines showing the pump
hydraulic efficiency and minimum NPSHr. The performance curves
are plotted based on actual test results for each size of pumps
running at various RPM and with various impeller sizes.
To determine the HP required for your system you will need to
determine the Specific Gravity (Sp.Gr.) of the fluid being transferred
and then multiply the Sp.Gr. by the HP shown on the curve. To
determine Sp.Gr.:
Magnum I
3X2X13
Speed: 1150 RPM
Curve: 944
feet*
(ft/sec)
3/8
1/2
5/8
3/4
7/8
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
23.1
34.6
46.2
57.7
69.3
80.8
92.4
103.9
115.5
127.0
138.6
150.1
161.7
173.2
184.8
196.3
207.9
219.4
230.9
38.6
47.25
54.55
61.00
66.85
72.20
77.20
81.80
86.25
90.50
94.50
98.30
102.10
105.70
109.10
112.50
115.80
119.00
122.00
13.3
16.3
18.8
21.0
23.0
24.8
26.6
28.2
29.7
31.1
32.5
33.8
35.2
36.4
37.6
38.8
39.9
41.0
42.1
23.6
28.9
33.4
37.3
40.9
44.2
47.3
50.1
52.8
55.3
57.8
60.2
62.5
64.7
66.8
68.9
70.8
72.8
74.7
36.9
45.2
52.2
58.3
63.9
69.0
73.8
78.2
82.5
86.4
90.4
94.0
97.7
101.0
104.0
108.0
111.0
114.0
117.0
53.1
65.0
75.1
84.0
92.0
99.5
106.0
113.0
119.0
125.0
130.0
136.0
141.0
146.0
150.0
155.0
160.0
164.0
168.0
72.4
88.5
102.0
114.0
125.0
135.0
145.0
153.0
162.0
169.0
177.0
187.0
191.0
198.0
205.0
211.0
217.0
223.0
229.0
94.5
116.0
134.0
149.0
164.0
177.0
188.0
200.0
211.0
221.0
231.0
241.0
250.0
259.0
267.0
276.0
284.0
292.0
299.0
148
181
209
234
256
277
296
313
330
346
362
376
391
404
418
431
443
456
467
179
219
253
283
309
334
357
379
399
418
438
455
473
489
505
521
536
551
565
213
260
301
336
368
398
425
451
475
498
521
542
563
582
602
620
638
656
672
289
354
409
458
501
541
578
613
647
678
708
737
765
792
818
844
868
892
915
2
378
463
535
598
655
708
756
801
845
886
926
964
1001
1037
1070
1103
1136
1168
1196
591
723
835
934
1023
1106
1182
1252
1320
1385
1447
1506
1565
1619
1672
1723
1773
1824
1870
714
874
1009
1128
1236
1335
1428
1512
1595
1671
1748
1819
1888
1955
2020
2080
2140
2200
2255
3-1/2
851
1041
1203
1345
1473
1591
1701
1802
1900
1991
2085
2165
2250
2330
2405
2480
2550
2625
2690
1158
1418
1638
1830
2005
2168
2315
2455
2590
2710
2835
2950
3065
3170
3280
3375
3475
3570
3660
1510
1850
2135
2385
2615
2825
3020
3200
3375
3540
3700
3850
4000
4135
4270
4400
4530
4655
4775
The actual quantity discharged by a nozzle will be less than the above table. A well tapered smooth nozzle may be assumed to flow 97 to 99% of the values in the tables.
Mud gun nozzles will flow approximately 85% of the above table and hopper nozzles will flow approximately 75% of the above table.
* Head in feet basis water at approximately 60F
Open Impeller
Dia: 7 to 13
Eye Area: 7.1 Sq. In.
Max Sphere: In.
120
100
Impeller
Diameter
2.5 NPSHR
30% Efficiency
40%
13
Head
psi
50%
13
80
12
23
55%
11
60%
60
10
9
10
65%
40
7.5
BH
BH
5B
HP
20
0.7
0.5
3B
2B
5B
HP
1B
BH
HP
1.5
HP
HP
BH
0
0
50
100
150
200
250
300
350
400
450
26
27
MISSION PRODUCTS
250
Magnum I
3X2X13
Speed: 700-2500 RPM
Curve: 976
Open Impeller
Dia: 6 to 13
Eye Area: 7.1 Sq. In.
Max Sphere: In.
Magnum I
3X2X13
Speed: 1750 RPM
Curve: 945
450
Speed
2.5 NPSHR
Impeller
Diameter
5.5
11
30%Efficency
40%
13
2400
350
23
45%
2300
50%
12
45%
150
11
55%
30
10
100
2500
400
200
Open Impeller
Dia: 13
Eye Area: 7.1 Sq. In.
Max Sphere: In.
25
60%
BH
BH
20
BH
15
7
50
6
10
7.5
1.5
BH
3B
2B
75 B
HP
2100
2000
250
60 B
HP
1900
1800
200
50 B
HP
1700
40 B
HP
30 B
HP
25 B
HP
1500
150
1300
BH
100
1100
BH
BH
5B
HP
HP
2200
300
50
700
HP
100
200
300
400
500
600
100
200
Magnum I
3X2X13
Speed: 3500 RPM
Curve: 946
Magnum I
4X3X13
Speed: 1150 RPM
Curve: 947
Open Impeller
Dia: 6 to 11
Eye Area: 7.1 Sq. In.
Max Sphere: In.
Impeller
Diameter
500
40%
Impeller
Diameter
17.5
100
3 NPSHR
10
100
9
300
60 B
HP
BHP
BHP
50%
75 B
HP
50 B
HP
7
40 B
HP
30 B
HP
10 B
20 B
HP
100
62%
57%
65%
65%
11
60
HP
75%
300
400
15
BH
40
7.5
5B
20
10
BH
BH
HP
3B
HP
1B
HP
1.5
0
200
28
10
0
100
60%
70%
20
12
25 B
HP
15 B
HP
60%Efficiency
80
HP
7.5 B
600
12
50%
13
125
400
500
40%
28
200
400
Open Impeller
Dia: 7 to 13
Eye Area: 12.5 Sq. In.
Max Sphere: 3/4 In.
120
11 NPSHR
25% Efficiency
11
300
600
HP
0
0
28
10 B
5 BH
2 BH
20 B
15 B HP
HP
900
500
600
100
200
300
2B
HP
BH
400
P
500
600
700
800
900
29
MISSION PRODUCTS
Magnum I
4X3X13
Speed: 1750 RPM
Curve: 948
250
Open Impeller
Dia: 13
Eye Area: 12.5 Sq. In.
Max Sphere: 3/4 In.
450
Speed
Impeller
Diameter
40%Efficiency
50%
13
8 NPSHR
55%
13
400
2400
60%
350
25
12
150
200
Magnum I
4X3X13
Speed: 1000-2400 RPM
Curve: 977
Open Impeller
Dia: 7 to 13
Eye Area: 12.5 Sq. In.
Max Sphere: 3/4 In.
65%
11
60
68%
70%
50
BH
BH
10
40
BH
100
30
25
50
BH
20 B
15 B
HP
2000
80 B
HP
75 B
HP
60 B
HP
1800
200
1600
50 BH
150
1400
BH
100
HP
HP
HP
100
200
300
400
500
600
700
800
900
1000
100
200
300
Magnum I
4X3X13
Speed: 3500 RPM
Curve: 949
Magnum I
5X4X14
Speed: 1150 RPM
Curve: 950
Open Impeller
Dia: 6 to 11
Eye Area:12.5 Sq. In.
Max Sphere: 3/4 In.
Impeller
Diameter
5 NPSHR
5 NPSHR
50% Efficiency
100
22
50%
55%
14
27
10
500
175
BHP
60%
150
BHP
125
BHP
400
300
600
700
800
900
1000
Open Impeller
Dia: 7 to 14
Eye Area: 19.6 Sq. In.
Max Sphere: 13/32 In.
Impeller
Diameter
14
11
500
120
700
600
400
10 B
7.5 B
65%
100
69%
200
25 B
HP
20 B
HP
15 BHP
50
40 B
HP
30 B
HP
1200
1000
HP
HP
250
10 B
7.5 B
5 BH
2200
300
BHP
75 B
HP
60 BH
80
60%
65%
12
65%
24
13
12
60
11
70%
20
10
30
BH
60%
40
50%
6
100
15 B
HP
20 BH
100
200
300
400
500
600
30
20
0
700
800
15
50 BH
P
40 BH
P
30 B
25 B HP
HP
900
1000
10
7.5
1B
100
200
300
HP
400
500
HP
3B
1.5 BH
HP
5B
600
700
BH
BH
BH
900
1000
31
MISSION PRODUCTS
Open Impeller
Dia: 7 to 14
Eye Area: 19.6 Sq. In.
Max Sphere: 13/32 In.
Magnum I
5X4X14
Speed: 1750 RPM
Curve: 951
Impeller
Diameter
250
100
5 NPSHR
55%
40%Efficiency
80
60%
14
30% 40%
15
29
200
13
65%
12
150
60
11
100
70%
BH
50
BH
P
40 B
HP
10
9
30 B
H
25 B P
HP
20 B
HP
15 BH
P
7.5 BHP
5 BH
0
0
100
200
300
400
500
600
700
10 BH
11
65% Efficiency
60%
70%
1000
350
60%
40
9
8
20
15
10
7.5
5B
HP
100
200
300
400
500
Open Impeller
Dia: 14
Eye Area: 19.6 Sq. In.
Max Sphere: 13/32 In.
Magnum I
6X5X11
Speed: 1750 RPM
Curve: 955
600
700
800
900
1000
5 NPSHR
150
1800
1600
60 B
HP
1400
50 B
HP
1300
40 B
1200
HP
1100
1000
900
800
HP
HP
15 B
P
10 B
7.5 B
HP
HP
30% 40%
60%
15
65%
70%
11
125
20
70%
27
10
100
65%
73%
75
60%
50
7.5
10
BH
BH
15 B
HP
400
500
600
700
800
900
1000
1100
1200
BH
BH
25 B
HP
20 BH
P
0
300
BH
40
25
32
1600
10
30
20 B
200
1500
50
HP
100
1400
30 B
5 BH
0
1300
175
1500
50
1200
Open Impeller
Dia: 8 to 11
Eye Area: 28.3 Sq. In.
Max Sphere: 15/16 In.
Impeller
Diameter
1700
100
1100
200
1900
150
50% Efficiency
200
1100
BH
BH
BH
BH
2000
250
70%
65%
2100
300
75%
10
Magnum I
5X4X14
Speed: 800-2100 RPM
Curve: 978
Speed
75%
73%
900
73%
20
800
7.5
11
60
HP
50%
3B
50
5 NPSHR
Impeller
Diameter
300
Open Impeller
Dia: 8 to 11
Eye Area: 28.3 Sq. In.
Max Sphere: 15/16 In.
Magnum I
6X5X11
Speed: 1150 RPM
Curve: 954
200
400
600
800
1000
1200
1400
1600
1800
2000
33
MISSION PRODUCTS
Open Impeller
Dia: 11
Eye Area: 28.3 Sq. In.
Max Sphere: 15/16 In.
Magnum I
6X5X11
Speed: 800 - 1900 RPM
Curve: 981
300
175
Speed
1900
150
Open Impeller
Dia: 10 to 14
Eye Area: 28.3 Sq. In.
Max Sphere: 15/16 In.
Magnum I
6X5X14
Speed: 1750 RPM
Curve: 953
Impeller
Diameter
250
1750
30%
14
4 NPSHR
40%Efficiency
50%
13
60%
22
27
125
1600
100
1400
75
60
1200
HP
1000
50
BH
30 B
13
125
12
150
100
11
10
100
20 B
15 BH
HP 65%
25
HP
15
5 BH
0
200
400
600
Magnum I
6X5X14
Speed: 1150 RPM
Curve: 952
800
1200
1400
1600
1800
40%
BH
400
600
800
1000
1200
1400
1600
1800
2000
Magnum I
6X5X14
Speed: 800 - 1800 RPM
Curve: 979
Open Impeller
Dia: 14
Eye Area: 28.3 Sq. In.
Max Sphere: 15/16 In.
14
250
1800
27
65%
1700
70%
Speed
13
80
65%
12
40
11
BH
30 B
10
HP
40
5B
HP
74%
7.5
60%
25
BH
BH
77%
20
77%
20
74%
10
15
BH
BH
BH
200
400
600
800
1000
1200
200
1600
1500
150
90 B
HP
1400
80 B
HP
70 B
HP
60 BHP
1300
1200
100
1100
1000
50 BH
900
800
50
40 B
7.5 B
HP
34
BH
50% Efficiency
60%
14
P
70%68%
65%
2000
300
30%
BH
Open Impeller
Dia: 10 to 14
Eye Area: 28.3 Sq. In.
Max Sphere: 15/16 In.
3 NPSHR
7.5 B 10 BH
P
HP
1000
BH
60
B
50 HP
BH
P
40 B
HP
HP
BH
120
60
30
50
20 B
100
P
68% 70%
25 B
25
Impeller
Diameter
75
72%
BH
HP
900
800
50
40 B
BH
200
1400
1600
1800
15 B
10 B
HP
HP
HP
25 B30 BHP
HP
HP
20 B
200
400
600
800
1000
1200
1400
1600
1800
35
MISSION PRODUCTS
Magnum I
8X6X11
Speed: 1150 RPM
Curve: 974
Open Impeller
Dia: 8 to 11
Eye Area: 28.3 Sq. In.
Max Sphere: 15/16 In.
140
60
Magnum I
8X6X11
Speed: 800 - 1800 RPM
Curve: 982
Open Impeller
Dia: 11
Eye Area: 28.3 Sq. In.
Max Sphere: 15/16 In.
Speed
Impeller
Diameter
11
1800
40%
50% Efficiency
65%
3 NPSHR
120
5
70%
70%
100
10
10
40
15
65%
20
50%
8
20
40%
3B
25
HP
15
80
1400
60
1200
40
1000
BH
7.5
5B
HP
BH
40
30
10
20
BH
3B
5B
HP
200
400
600
800
1000
1200
1400
1600
1800
200
400
600
800
Magnum I
8X6X11
Speed: 1750 RPM
Curve: 975
30% 40%
120
Magnum I
8X6X14
Speed: 1150 RPM
Curve: 956
15
BH
Impeller
Diameter
50% Efficiency
60%
1000
65%
30% 40%
18
100
1800
2000
2200
14 1/8
50% Efficiency
60%
5
65%
70%
70%
25
30
65%
50
60
BH
7.5
40
BH
40
10
BH
20
50%
15
20
BH
30
BH
25
200
400
600
13
BH
65%
800
1000
1200
1400
1600
1800
60%
60
11
60
50
40
10
40
20
25
BH
20
BH
10
2000
2200
15
12
7.5
70%
80
BH
60%
1600
3 NPSHR
12
10
80
1400
Open Impeller
Dia: 10 to 14 1/8
Eye Area: 50.3 Sq. In.
Max Sphere: 1 3/8 In.
14
100
1200
120
70%
Open Impeller
Dia: 8 to 11
Eye Area: 28.3 Sq. In.
Max Sphere: 15/16 In.
4 NPSHR
Impeller
Diameter
11
36
HP
BH
0
0
140
BH
20 B
HP
BH
800
10
1600
15
BH
500
1000
BH
BH
30 B
HP
BH
BH
BH
0
0
BH
1500
2000
2500
3000
37
MISSION PRODUCTS
Magnum I
8X6X14
Speed: 1750 RPM
Curve: 957
Open Impeller
Dia: 10 to 14
Eye Area: 50.3 Sq. In.
Max Sphere: 1 3/8 In.
100
250
Impeller
Diameter
4 NPSHR
Magnum I
10X8X14
Speed: 1150 RPM
Curve: 993
Open Impeller
Dia: 12 to 14
Eye Area: 63 Sq. In.
Max Sphere: 2 In.
Impeller
Diameter
8
40%Efficiency
50%
12
20
60%
14
63%
200
80
27
65%
8 NPSHR
14
35% Efficiency
50%
10
55%
13
68%
150
12
150
125
11
65%
100
30
50
BH
100
63%
10
BH
P
BH
75
60%
BH
P
60
BH
P
50
BH
P
BH
60%
13
14
60
60%
12
55%
15
40
50%
BH
20
BH
50
20
30
40 B
25
HP
500
1000
1500
2000
2500
3000
500
Open Impeller
Dia: 14 1/8
Eye Area: 50.3 Sq. In.
Max Sphere: 1 3/8 In.
1000
200
Magnum I
10X8X14
Speed: 1750 RPM
Curve: 994
Impeller
Diameter
14
Speed
1700
175
1500
1400
70 B
HP
100
50 BH
1000
100 B
HP
90 B
HP
80 B
HP
60
BH
2500
3000
10 B
HP
50%
20
55%
HP
HP
20 B
60%
12
55%
50%
100
50
BH
75
60
20
BH
0B
75
HP
BH
150
P
100
125
BH
1000
BH
BH
25
HP
0
500
24
125
HP
30 B
15 B
13
38
4000
16 NPSHR
30% Efficiency
45%
40 B
0
0
3500
Open Impeller
Dia: 12 to 14
Eye Area: 63 Sq. In.
Max Sphere: 2 In.
50
800
2000
1600
1200
50
60%
150
150
BH
250
200
BH
Magnum I
8X6X14
Speed: 800 - 1700 RPM
Curve: 980
BH
40
BH
60
BH
2000
2500
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
39
MISSION PRODUCTS
Magnum I
10X8X14
Speed: 800-1800 RPM
Curve: 995
SPEED
200
Open Impeller
Dia: 14 1/8
Eye Area: 63 Sq. In.
Max Sphere: 2 In.
Magnum XP
12X10X23
Speed: 1200 RPM
Curve: XP010-C1-CATV2
Open Impeller
Dia: 20 to 23
400
1800
Impeller
Diameter
350
100
20
0B
HP
1200
15
0B
12
HP
5B
1000
HP
10
75
60
800
500
1000
1500
2000
2500
100
3000
3500
4000
4500
5000
500
1000
1500
2000
Magnum XP
12X10X23
Speed: 1400 RPM
Curve: XP010-E1-CAT
Open Impeller
Dia: 15 to 18
Max Sphere: 3/4
3000
3500
4000
4500
5000
5500
00
Open Impeller
Dia: 20 to 23
15 NPSHR
Impeller
Diameter
30
35
62%
57%
16
15
50%
200
64% Efficiency
62%
20
59%
300
250
BH
50
0B
10
P
BH
P
BH
0B
HP
BH
HP
1600
20
15
5B
12
HP
66%
150
0
800
67%
21
200
50
400
350
66%
75
40%
22
40
150
100
40
67%
400
17
25
20
450
18
300
2500
23
40
500
Impeller
Diameter
250
BH
400
350
BH
Magnum XP
8X6X18
Speed: 1750 RPM
Curve: 86817
40
BH
0
0
150
60%
BH
30
BH
200
20
20
BH
64% Efficiency
20
10
66%
250
HP
BH
68%
21
BH
BH
69%
30
40
50
69%
22
P
BH
50
0B
68%
23
300
25
1400
20
25
15
10 NPSHR
60% 64%
55%
66%
1600
150
2000
2400
100
0
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
00
6000
41
MISSION PRODUCTS
200
Magnum XP
14X12X22
Speed: 1200 RPM
Curve: 1081
Impeller
30%
Diameter
22
Open Impeller
Dia: 18 to 22
Max Sphere: 1 5/8
40%
Impeller
Diameter
20 NPSHr
60%
25
21
10 NPSHR
100
63%
13
19
23
38% Efficiency
40%
30%
14
45%
48%
13
20
Total Differential Head - Feet
120
15
55% Efficiency
50%
10
Vortex
3X3
Speed: 1150 RPM
60%
150
19
65%
350
18
BH
300
100
BH
12
250
BH
200
P
150
50
BH
BH
80
50%
12
25
11
60
10
45%
15
40
10
20
7.5
3000
4000
5000
6000
100
200
300
BH
300
400
500
600
700
Open Impeller
Dia: 22
Max Sphere: 1 5/8
Vortex
3X3
Speed: 1750 RPM
240
14
200
250
Impeller
Diameter
12 NPSHR
20% Efficiency
17
13
30%
21
35%
40%
13
43%
12
1200
200
1000
150
50
0B
45
HP
0B
0B
HP
35
0B
HP
HP
0B
25
HP
0B
30
20
HP
0B
40
15
100
60
50
40
BH
P
45%
43%
30
B
80
HP
40%
25
10
BH
15
BH
42
4000
5000
6000
7000
8000
9000
00
BH
P
35%
20
BH
P
0
3000
BH
120
7.5
1000
BH
10
40
P
45%
11
HP
BH
160
HP
0B
50
800
Magnum XP
14X12X22
Speed: 1000 -1400 RPM
Curve: M1412VA
RPM
1400
BH
8000
7000
HP
HP
HP
0
2000
5B
3B
2B
BH
40%
BH
BH
50%
20
48% BHP
100
200
300
400
500
600
700
43
MISSION PRODUCTS
120
Vortex
4X4
Speed: 1150 RPM
Impeller
Diameter
100
6 NPSHR
40% Efficiency
120
100
14
20
50%
28
12
55%
11
40
BH
10
50%
9
30
40
25
BH
P
40%
BH
80
35% Efficiency
6 NPSHR
14
80
Impeller
Diameter
15
13
60
Vortex
6X6
Speed: 1150 RPM
16
20
45%
50%
52%
30
13
52% 50%
45% 50
12
11
60
40
9
50
20
7.5
10
BH
15
20
BH
BH
7.
HP
HP
BH
BH
5B
3B
40
5
20
10
BH
30
BH
200
400
600
800
1000
1200
1400
Vortex
4X4
Speed: 1750 RPM
240
Impeller
Diameter
14
200
400
600
800
Vortex
6X6
Speed: 1750 RPM
Impeller
Diameter
10
13
45%
40%
30% Efficiency
21
28
1000
15%
10 NPSHR 30%
160
10
0B
11
HP
51%
10
48%
75
BH
9
80
45%
60
7.5
10
BH
BH
15
50
30
BH
20
BH
BH
25
BH
0
200
400
600
800
1000
40
200
12
17
40%
35%
40
BH
BH
1400
1600
1800
2000
2200
2400
2600
2800
25% Efficiency
51%
13
120
1200
BH
250
48%
200
BH
BH
20
44
15
0
0
90
BH
P
80
70 BHP
BH
P
60
BH
P
10
25
32
14
45%
47%
13
36
12
150
11
12
5B
10
100
HP
30%
10
0
BH
20
50
BH
BH
30
75
BH
BH
1400
40
50 B
200
400
600
800
1000
1200
1400
HP
BH
BH
BH
1800
2000
2200
45
MISSION PRODUCTS
Dimensional Data
Sandmaster Dimensions1
A
9
9
9
9
9
9
9
9
B
19-5/8
19-5/8
19-5/8
19-5/8
19-5/8
19-5/8
19-5/8
19-5/8
E
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
F
15-7/16
15-7/16
15-7/16
15-7/16
15-7/16
15-7/16
15-7/16
15-7/16
G
L
17-7/8
8-3/4
17-7/8
9-3/8
19
10-3/4
17-7/8 12-1/16
21
12-1/16
20
13-1/4
23-9/16 13-1/4
22-3/8 13-11/16
P
X
Y
2-5/16 10-1/4
3-3/4
2-5/16 10-1/4
4-1/4
2-5/16
11
5
2-5/16
11
5-3/4
2-5/16
11
5-3/4
2-5/16
14
6-1/4
2-5/16
14
6-1/4
2-5/16 14-3/16 6-11/16
Z
7
6-3/4
6-1/8
6
6
8-3/8
8-3/8
8
CP
DD
29-1/4
9
29-3/8
9
30
9-11/16
30-5/8
9
30-5/8 10-1/2
31-1/4
10
31-1/4
12
31-1/4 11-3/16
* THE ABOVE DRILLING IS ANSI STANDARD 125 lb. CAST IRON OR ANSI SERIES 150 STEEL FLAT FACE. ALL FLANGE HOLES ARE THRU CLEARANCE HOLES.
CP
CP
29-1/4
29-3/8
30
30-5/8
30-5/8
31-1/4
31-1/4
31-1/4
D
5-1/2
6-1/8
7-1/2
8-3/4
8-3/4
10
10
10.5
9 1/8
Pump
Size
3X2X13
4X3X13
5X4X14
6X5X11
6X5X14
8X6X11
8X6X14
10X8X14
KEY
" SQ. X 3" LONG
P
L
B
Motor
Frames
BASE
HA
HB
HC
182T-215T
OB-7
19
49-1/2
33-1/2
254T-286T
OB-1
19
55
39
324T-365T
OB-2
26
61
45
404T-405T
OB-3
26
66
50
444T-445T
OB-4
30
72
56
* Unless spacer coupling is utilized.
** Approximate maximum to outside of conduit box
Tolerences 1/8
1
C
19
27-1/2
33-1/2
38-1/2
44-1/2
NOTE: Dimensions are for reference only. Certified drawings should be requested for construction purposes.
SP*
1
1
1
1
1
AB**
10.25
13.25
18.8
20.5
26.25
E
A
A
15-1/4
15-1/4
15-1/4
15-1/4
15-1/4
15-1/4
15-1/4
15-1/4
B
17-3/4
17-3/4
17-3/4
17-3/4
17-3/4
17-3/4
17-3/4
17-3/4
E
6-9/16
6-9/16
6-9/16
6-9/16
6-9/16
6-9/16
6-9/16
6-9/16
F
11-1/4
11-1/4
11-1/4
11-1/4
11-1/4
11-1/4
11-1/4
11-1/4
G
L
17-7/8 10-7/16
17-7/8 11-1/16
19
12-7/16
17-7/8
13-3/4
21
13-3/4
20
14-15/16
23-9/16 14-15/16
22-3/8
15-3/8
P
4
4
4
4
4
4
4
4
X
10-1/4
10-1/4
11
11
11
14
14
14-3/16
Y
3-3/4
4-1/4
5
5-3/4
5-3/4
6-1/4
6-1/4
6-11/16
Z
CP
DD
7
25-1/16 8-15/16
6-3/4 25-1/8 8-15/16
6-1/8 25-13/16 9-1/2"
6
26-3/8 8-15/16
6
26-3/8 10-1/2"
8-3/8 27-1/16
10
8-3/8 27-1/16 11-13/16
8
27-1/16 11-3/16
* THE ABOVE DRILLING IS ANSI STANDARD 125 lb. CAST IRON OR ANSI SERIES 150 STEEL FLAT FACE. ALL FLANGE HOLES ARE THRU CLEARANCE HOLES.
1
NOTE: Dimensions are for reference only. Certified drawings should be requested for construction purposes.
46
47
MISSION PRODUCTS
Vortex Dimensions1
AB
AG
213P
9
215P
9
254P
10-1/2
256P
10-1/2
284P
13
286P
13
324P
14-1/4
326P
14-1/4
364P
15
365P
15
Assembled Unit Weight
less motor pounds
20
20
24
24
26-3/4
26-3/4
29
29
31
31
CP
P
Motor Wt.
3x3x14 4x4x14 6x6x14
61
65
65
11
310
61
65
65
11
360
66
69
69
13-1/4
380
66
69
69
13-1/4
410
67
71
71
14
620
67
71
71
14
640
71
74
74
17
885
71
74
74
17
910
73
76
76
18
1200
73
76
76
18
1470
825
855
965
Vortex
A
9
9
9
B
19-7/16
19-7/16
19-7/16
E
3-1/2
3-1/2
3-1/2
F
15-7/16
15-7/16
15-7/16
G
L
19 13-15/16
20
15
22 17-3/4
P
2-5/16
2-5/16
2-5/16
X
11
11-7/8
13-7/8
Y
Z
6-1/4 7-1/4
6-7/16 7-1/4
7-13/16 7-1/4
CP
32
32-13/16
34-3/16
DD
9-1/2
10
11
PUMP SIZE
3x3x14
4x4x14
6x6x14
A
22-1/2D
22-1/2D
22-1/2D
E
5-5/16
5-5/16
5-5/16
Dimensions in inches
G
VD
VS
1
27-3/4
16-1/4
1
27-3/4
16-3/16
1
29-1/2
21-13/16
VY
7-1/4
9
9-1/2
X
11
11
13
Z
7-1/4
7-1/4
7-1/4
VY
7-1/4
9
8-1/2
9-1/2
9-1/2
14
14
X
10-1/4
10-1/4
11
11
11
14
14
Z
7
6-3/4
6-1/8
6
6
8
8-3/8
* THE ABOVE DRILLING IS ANSI STANDARD 125 lb. CAST IRON OR ANSI SERIES 150 STEEL FLAT FACE. ALL FLANGE HOLES ARE THRU CLEARANCE HOLES
Magnum
K
7 11/16
8 9/16
9 15/16
Dimensions in inches
L
M
32
7 1/4
33 1/4
7 1/4
34 1/4
7 1/4
N
11
11 7/8
13 7/8
O
6 1/4
6 7/16
7 9/16
Motor
AB
AG
Frames
213P
9
20
215P
9
20
254P
10-1/2
24
256P
10-1/2
24
284P
13
26-3/4
286P
13
26-3/4
324P
14-1/4
29
326P
14-1/4
29
364P
15
31
365P
15
31
Assembled unit weight
less motor pounds
CP
3x2x13 4x3x13 5x4x14 6x5x11
56
57
58
59-3/4
56
57
58
59-3/4
60
61
62
64
60
61
62
64
62-3/4
63
64-3/4
66
62-3/4
63
64-3/4
66
65
66
67
69
65
66
67
69
67
68
69
71
67
68
69
71
800
820
855
885
6x5x14
59-3/4
59-3/4
64
64
66
66
69
69
71
71
925
8x6x11
60
60
65
65
67-1/4
67-1/4
70
70
71
71
960
8x6x14
60
60
65
65
67-1/4
67-1/4
70
70
72
72
990
Motor Wt.
11
11
13-1/4
13-1/4
14
14
17
17
18
18
310
360
380
410
620
640
885
910
1200
1470
Magnum
Motor Frame Base No.
143T
15901-3
145T
15901-3
182T
15901-3
184T
15901-3
213T
15901-3
215T
15901-3
254T
15901-3
256T
15901-3
284T
15901-3
284TS
15901-3
286T
15901-3
286TS
15901-3
324T
15901-3
324TS
15901-3
326T
15901-3
326TS
15901-3
48
A
12-15/16
12-15/16
12-15/16
12-15/16
12-15/16
12-15/16
12-15/16
12-15/16
12-15/16
12-15/16
12-15/16
12-15/16
12-15/16
12-15/16
12-15/16
12-15/16
B
16-9/16
16-9/16
17-9/16
17-9/16
18-7/16
18-7/16
19-7/16
19-7/16
20-5/32
20-5/32
20-5/32
20-5/32
21-3/8
21-3/8
21-3/8
21-3/8
C
7-3/4
7-3/4
9-3/8
9-3/8
11
11
13
13
14-1/2
14-1/2
14-1/2
14-1/2
16-7/8
16-7/8
16-7/8
16-7/8
D
7-15/16
7-15/16
7-1/4
7-1/4
9-1/4
9-1/4
10-1/2
10-1/2
12-5/16
12-5/16
12-5/16
12-5/16
14-7/16
14-7/16
14-7/16
14-7/16
E
6-1/2
7
7-3/4
8-1/4
9-5/8
10-3/8
12-3/8
13-1/4
14-1/8
12-3/4
14-7/8
13-1/2
15-3/4
14-1/4
16-1/2
15
F
13-1/4
14-1/4
14-9/16
15-9/16
17-7/8
19-7/16
22-3/4
24-9/16
26-5/8
25-1/4
28-1/8
26-3/4
28-15/16
28-1/8
31-1/8
29-5/8
NOTE: Dimensions are for reference only. Certified drawings should be requested for construction purposes.
PUMP SIZE
3x2x13
4x3x13
5x4x14
6x5x11
6x5x14
8x6x11
8x6x14
A
22-1/2D
22-1/2D
22-1/2D
22-1/2D
22-1/2D
22-1/2D
22-1/2D
E
5-5/16
5-5/16
5-5/16
5-5/16
5-5/16
5-5/16
5-5/16
Dimensions in inches
G
VD
VS
1
25-1/4
13-3/4
1
25-3/4
14
1
26-1/2
16-1/4
1
26-1/4
18
1
26-1/4
18
1
26-3/4
21
1
26-3/4
21
NOTE: Dimensions are for reference only. Certified drawings should be requested for construction purposes.
49
MISSION PRODUCTS
Magnum XP Dimensions1
KEY
7/8" SQ. X 5" LONG
A
16-13/32
16-13/32
16-13/32
E
6-7/8
6-7/8
6-7/8
G
25-1/4
33-5/8
37-3/4
L
16-1/32
18-11/16
18-3/8
X
16
22
19-7/16
Y
5-5/32
6-15/16
6-5/8
Z
10-19/32
13-1/2
14-9/16
CP
30-13/32
31-1/2
31-3/16
DD
12-7/16
16-13/16
18-13/16
* THE ABOVE DRILLING IS ANSI STANDARD 150 SERIES FLAT FACE EXCEPT THE 8 X 6 XP IS ANSI 250# (300 SERIES) RAISED FACE. ALL DISCHARGE FLANGE HOLES ARE THRU CLEARANCE HOLES EXCEPT AS NOTED.
1 THE DISCHARGE FLANGE DRILLING FOR THE 14 X 12 XP HAS 12 HOLES, 10 HOLES THRU 1" DIA. & 2 HOLES TAPPED 7/8 -9UNC-2B AS SHOWN, ON A 17" DIA. B.C.
NOTE: Dimensions are for reference only. Certified drawings should be requested for construction purposes.
230 Volts
3.60
5.20
6.80
9.60
15.20
22.00
28.00
42.00
54.00
68.00
80.00
104.00
130.00
154.00
192.00
240.00
296.00
460 Volts
1.80
2.60
3.40
4.80
7.60
11.00
14.00
21.00
27.00
34.00
40.00
52.00
65.00
77.00
96.00
120.00
148.00
575 Volts
1.40
2.10
2.70
3.90
6.10
9.00
11.00
17.00
22.00
27.00
32.00
41.00
52.00
62.00
77.00
96.00
118.00
D
3.50
3.50
4.50
4.50
5.25
5.25
6.25
6.25
7.00
7.00
7.00
7.00
8.00
8.00
8.00
8.00
9.00
9.00
9.00
9.00
10.00
10.00
10.00
10.00
11.00
11.00
11.00
11.00
11.00
11.00
E
2.75
2.75
3.75
3.75
4.25
4.25
5.00
5.00
5.50
5.50
5.50
5.50
6.25
6.25
6.25
6.25
7.00
7.00
7.00
7.00
8.00
8.00
8.00
8.00
9.00
9.00
9.00
9.00
9.00
9.00
2F
4.00
5.00
4.50
5.50
5.50
7.00
8.25
10.00
9.50
9.50
11.00
11.00
10.50
10.50
12.00
12.00
11.25
11.25
12.25
12.25
12.25
12.25
13.75
13.75
14.50
14.50
16.50
16.50
20.00
25.00
H
.34
.34
.41
.41
.41
.41
.53
.53
.53
.53
.53
.53
.66
.66
.66
.66
.66
.66
.66
.66
.81
.81
.81
.81
.81
.81
.81
.81
.81
.81
U
.875
.875
1.125
1.125
1.375
1.375
1.625
1.625
1.875
1.625
1.875
1.625
2.125
1.875
2.125
1.875
2.375
1.875
2.375
1.875
2.875
2.125
2.875
2.125
3.375
2.375
3.375
2.375
3.375
3.375
N-W
2.25
2.25
2.75
2.75
3.38
3.38
4.00
4.00
4.62
3.25
4.62
3.25
5.25
3.75
5.25
3.75
5.88
3.75
5.88
3.75
7.25
4.25
7.25
4.25
8.50
4.75
8.50
4.75
8.50
8.50
AA
3/4
3/4
3/4
3/4
1
1
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
3
3
3
3
3
3
3
3
BA
2.25
2.25
2.75
2.75
3.50
3.50
4.25
4.25
4.75
4.75
4.75
4.75
5.25
5.25
5.25
5.25
5.88
5.88
5.88
5.88
6.62
6.62
6.62
6.62
7.50
7.50
7.50
7.50
7.50
7.50
AB, O, P and C dimensions vary by motor rating. Contact National Oilwell Varco for
these dimensions.
Dimensions vary for each motor manufacturer. All dimensions are approximate.
1
NOTE: Dimensions are for reference only. Certified drawings should be requested for construction purposes.
50
51
MISSION PRODUCTS
Piping Recommendations
52
53
MISSION PRODUCTS
Related Equipment
Associated Products Manufactured and
Distributed by National Oilwell Varco
Diesel Fuel
Filtration Systems
IEC Explosion Proof
Motor Controls
Envirohopper
Dust Collecting
Low Pressure
Mud Guns
Potable/Sanitary
Water Pressure Sets
54
55
MISSION PRODUCTS
56
Conversion Table
Multiply
By
To Obtain
Atmospheres
1.01325
Bars
Atmospheres
33.9
Feet of water
Atmospheres
14.5
Lbs / sq. inch
Bars
0.98692
Atmospheres
Bars
1.0197
kg / cm
Bars
14.5
PSI
Barrels - oil
42
Gallons - oil
Barrels (42 U.S. gal) / day
0.02917
GPM
BTU
3.927 x 104
Horsepowers - hrs.
Centimeters
0.3937
Inches
Cubic cm / sec
0.0158502
GPM
Cubic feet
0.02832
Cubic meters
Cubic feet / sec.
448.831
GPM
Cubic Inches
4.329 x 10-3
Gallons
Cubic meters / hr
4.4033
GPM
Cubic meters / min
264
GPM
Feet
0.3048
Meters
Feet of head
Specific Gravity 2.31
PSI
Feet of Water
0.0295
Atmospheres
Foot - pounds
5.050 x 10-7
Horsepower hrs.
Gallons
3785
Cubic centimeters
Gallons
0.1337
Cubic feet
Gallons
231
Cubic inches
Gallons
3.785
Liters
Pints
8
Gallons
Quarts
4
Gallons
Gallons - Imperial
1.20095
U.S. gallons
Gallons water
8.34
Pounds of water
Gallons / hour
0.016667
GPM
GPM
34.286
Barrels (42 U.S. gal.) / day
GPM
1.4286
Barrels (42 U.S. gal.) / hr.
GPM
0.2272
m / hr
GPM
1440
Gallons / day
GPM
3.7878
Liters / min
grams/cu. cm.
1
Sp.Gr.
Horsepower hrs.
2546
B.T.U.
Horsepower hrs.
1.98 x 106
Foot - lbs.
Kilograms / cm
14.223
PSI
Kilograms / sq. meter
1.422 x 10-3
PSI
Kilopascal
0.145
PSI
Kilowatts
1.341
Horsepower (U.S.)
Kilowatt hours
3414.4
B.T.U.
Liters/min
0.2642
GPM
Liters/sec
15.9
GPM
Meters
3.28
Feet
Miles
5280
Feet
Miles / hr
1.609
Kilometers / hr.
Miles / hr
0.8689
Knots
Millimeters
0.03937
Inches
PSI
0.06895
Bars
PSI
0.070307
kg / cm
PSI
6.895
Kilopascals
57