Professional Documents
Culture Documents
directly at the solder. Heat the metal where you want the solder to
flow (towards the pieces needing joining).
Antique lamination of jewellery (kshitij)
Some of the jewellery needs an antique finish as per the
requirements of the customer or the designer. In this when the
piece is ready, a coating of VIM powder is dusted over the
jewellery and then the regular finishing and polishing is done for an
antique look.
Jewellery finishing (Kshitij)
Firstly buffing of the piece is done , in this This process makes the
surface smooth producing a high luster and mirror finish if desired.
This is done with the use of buffing wheels and buffing
compounds. The polishing is done which removes surface
material, improving the surface and preparing it for buffing. This is
generally a coarse operation involving sandpaper and/or coarse
polishing compounds.
Eloctroplating of jewellery (Kshitij)
Electroplating is a method to put a metal coating onto an object, in
our case a piece of jewellery, by placing it in a solution containing
the metal to be plated and passing an electrical current through the
piece and the solution. It is possible to electroplate coatings of
most pure metals and even some alloys. Rhodium one of the
platinum group of metals with a good white color is also done the
same way.
Rhodium (Puneet)
Rhodium plating is a metal deposition process used to coat
materials with a decorative and protective layer of rhodium . When
applied as a thin plate, it affords a durable finish of exceptional
brightness
How ultrasonic cleaning is done (Puneet)
A. Fill the tank with water
B. Add jewelry
C. Clean the jewellery
D. Rinse the jewellery
E. Empty the tank
F. repeat
Hand fabrication of jewellery (Rshabh)
Jewelry is hand fabricated by joining precious metal segments or
parts by soldering or welding them into position. Components used