Professional Documents
Culture Documents
30/JAN/2015
Description:
Flame Retardant, Fire Resistant, Halogen Free, Low Smoke Emission Cables
Tier:
Ratings:
See attachment
Service Restrictions:
Comments:
None
Notes / Documentation:
Quality Control Reports No.111QA0xxx dated 12 July 2011 Prototype Test Reports
dated 12 July 2011 FIRE RESISTANT TEST REPORTS Att. : 11-A through 11-M
dated 10 July 2011 FLAME RETARDANCE TEST REPORTS Att. : 2011-21
through 2011-48 dated 12 July 2011 Ozone Test EPDM-EVA No. AB-0001-T
(38902) dated 02 February 2009
Term of Validity:
01/30/2015 6:15:58 AM
Page 1 of 2
National Standards:
International Standards:
The Manufacturer has provided a declaration about the control of, or the lack of
Asbestos in this product. The Rules applicable to this assessment are: 2012 Steel
Vessel Rules 1-1-4/7.7, 1-1 Appendix 3, 4-8-3/9 of SVR Ed.2012, 4-3-4/7 of MODU
Ed.2012.
IEC 60092-350, IEC 60092-351, IEC 60092-359, IEC 60092-376, IEC 60332-3-22
(Cat.A), IEC 60754-1, IEC 60754-2, IEC 61034-1, IEC 61034-2, IEC 60331-31,
NEK 606.
Government Authority:
EUMED:
Others:
Model Certificate
PDA
Model Certificate No
12-GE848270-PDA
Issue Date
17/FEB/2012
Expiry Date
16/FEB/2017
ABS Programs
ABS has used due diligence in the preparation of this certificate and it represents the information on the product in the ABS Records as of the
date and time the certificate was printed. Type Approval requires Drawing Assessment, Prototype Testing and assessment of the
manufacturer's quality assurance and quality control arrangements. Limited circumstances may allow only Prototype Testing to satisfy Type
Approval. The approvals of Drawings and Products remain valid as long as the ABS Rule, to which they were assessed, remains valid. ABS
cautions manufacturers to review and maintain compliance with all other specifications to which the product may have been assessed. Further,
unless it is specifically indicated in the description of the product; Type Approval does not necessarily waive witnessed inspection or survey
procedures (where otherwise required) for products to be used in a vessel, MODU or facility intended to be ABS classed or that is presently in
class with ABS. Questions regarding the validity of ABS Rules or the need for supplemental testing or inspection of such products should, in all
cases, be addressed to ABS.
01/30/2015 6:15:58 AM
Page 2 of 2