Professional Documents
Culture Documents
DIgSILENT PowerFactory
1. Create a new project called Exp3, use 60 Hz for frequency
2. Open the data manager and select the Active Project
Page 1 of 14
3.2. The following window will be displayed where we will input all the required data.
4. Lets start by filling out Name, Nominal Frequency, Number of Earth Wires, Number of Line Circuits,
Transposition, Input Mode, and Earth Conductivity as follows:
Page 2 of 14
5.2. The following screen will be displayed where one can create a new conductor type.
Page 3 of 14
where one can input the conductor data for each phase
Page 4 of 14
6. Now, lets input data for Types of Earth Conductors (shield conductors). To do so, follow similar
steps from5.1 to 5.4 filling out the appropriate data for Earth Conductor 1
Page 5 of 14
7. For Earth Conductor 2 one can just copy and paste the Conductor Types TypCon from Earth
Conductor 1.
Page 6 of 14
9. Continue with the Geometry Tab, where one can input the location (geometry) of the line and earth
conductors, the x- and y-axis are located at earth level and at the center of the tower, respectively.
Page 7 of 14
Page 8 of 14
Page 9 of 14
12. Finally, push Calculate button. The results will be displayed on the Output Window.
13. Copy the results to the clip board. To do so, right click and choose copy where the following window
will be displayed:
Page 10 of 14
The user can chose User Settings to select what message data should be copied.
Page 11 of 14
Page 12 of 14
5.46605e-002
2.80620e-001
5.53438e-002
3.33192e-001
5.53334e-002
3.07684e-001
5.52890e-002
2.64865e-001
5.46605e-002
2.80620e-001
1.57987e+000
1.06836e+000
5.52890e-002
2.64865e-001
5.53334e-002
3.07684e-001
5.53438e-002
3.33192e-001
5.53438e-002
3.33192e-001
5.52890e-002
2.64865e-001
7.38320e-002
6.32752e-001
5.59891e-002
3.14778e-001
5.59336e-002
2.62534e-001
5.53334e-002
3.07684e-001
5.53334e-002
3.07684e-001
5.59891e-002
3.14778e-001
7.38320e-002
6.32752e-001
5.59891e-002
3.14778e-001
5.52890e-002
2.64865e-001
5.53438e-002
3.33192e-001
5.59336e-002
2.62534e-001
5.59891e-002
3.14778e-001
7.38320e-002
6.32752e-001
9.96129e-002
2.20348e-001
9.96129e-002
2.20348e-001
9.96129e-002
2.20348e-001
1.18700e-001
5.55096e-001
9.96129e-002
2.20348e-001
9.96129e-002
2.20348e-001
9.96129e-002
2.20348e-001
1.18700e-001
5.55096e-001
Page 13 of 14
0.00000e+000
0.00000e+000
-1.38778e-017
0.00000e+000
0.00000e+000
0.00000e+000
1.90867e-002
3.34748e-001
1.38778e-017
-4.16334e-017
0.00000e+000
-2.77556e-017
1.38778e-017
-2.77556e-017
1.90867e-002
3.34748e-001
0.00000e+000
-5.84073e-001
0.00000e+000
-5.84073e-001
0.00000e+000
-5.84073e-001
0.00000e+000
4.35968e+000
0.00000e+000
-5.84073e-001
0.00000e+000
-5.84073e-001
0.00000e+000
-5.84073e-001
0.00000e+000
4.35968e+000
0.00000e+000
0.00000e+000
0.00000e+000
0.00000e+000
0.00000e+000
0.00000e+000
0.00000e+000
4.94375e+000
0.00000e+000
2.22045e-016
0.00000e+000
0.00000e+000
0.00000e+000
2.22045e-016
0.00000e+000
4.94375e+000
Page 14 of 14