Professional Documents
Culture Documents
ROBAR
TAB
SECTION CONTENTS
Forward
0.1.1
1.0.1
2.0.1
Sewer Saddles
3.0.1
Restrainers
4.0.1
Repair Clamps
5.0.1
6.0.1
7.0.1
Expansion Joints
8.0.1
9.0.1
10.0.1
10
B.C.
Phone:
Fax:
E-mail:
Page
QUEBEC Phone:
Fax:
0.0.1
FORWARD
ROBAR
Table of Contents
0.0.1
0.1.1
0.4.1
Warranty
0.5.0
0.7.1
0.8.0
0.9.1
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
0.1.1
ROBAR, as used herein, means Robar Industries Ltd. a British Columbia Corporation and Les Produits
Industriels Robar Inc. a Quebec Corporation.
ENTIRE AGREEMENT. The terms and conditions stated here constitute the entire Agreement between
the parties and any contrary or additional terms and conditions shall be of no effect unless agreed to in
writing by an authorized officer of ROBAR.
PRICES. All prices are stated F.O.B. ROBAR's shipping warehouse and are subject to change without
notice. Prices in effect at time of shipping will apply unless prior written quotation was obtained.
FREIGHT. All shipments to purchaser will be freight collect or prepaid-and-charge, unless the shipment
qualifies for freight allowance as stated in the Freight Allowance Policy.
TERMS OF PAYMENT. All invoices are due within 30 days. A 2% prompt pay discount may be
calculated on the before-tax amount and deducted if paid within 20 days from date of invoice.
DELIVERIES AND DELAYS. Normal deliveries are 14 to 28 days from date of order received. ROBAR
shall not be held liable for any delay or default in delivery of products arising out of or resulting from any
cause beyond the control of ROBAR. This includes armed conflict or economic dislocation resulting
therefrom; embargoes, shortage of labor or work stoppage beyond the control of ROBAR; shortages of
raw materials, fuel, energy, production facilities or transportation; civil disorders of any kind; fires; floods;
disaster and accidents.
TAXES. All prices are stated before taxes. Taxes will be added when applicable and are the
responsibility of the purchaser.
RETURNED GOODS. No returned goods will be accepted without prior authorization. All goods approved
for return will be subject to a 35% minimum restocking charge. Products made to the purchaser's
specification and requiring special materials or sizing may not be returned.
CANCELLATION OF ORDERS. Any orders that are canceled will be subject to charges to the extent of
the amount of labour and material already expended. Cancellation of orders already in transit will not be
accepted and will be subject to the Returned Goods Policy stated above.
DISCLAIMER. ROBAR warrants its products only against defects in materials and workmanship.
ROBAR's liability is expressly limited to repayment of the purchase price, repair, or replacement. ROBAR
reserves the right to furnish substitutes for materials which cannot be reasonably obtained because of
reasons beyond ROBAR's control.
TITLE AND RISK. Title and risk of loss or damage to the goods shipped passes to the customer upon
delivery to the carrier regardless of who pays the shipping costs.
WARRANTY. See ROBAR's One Year Limited Warranty.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
0.4.1
WARRANTY
ROBAR
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
0.5.0
ROBAR'S
STANDARD MATERIAL SPECIFICATIONS
ROBAR
Cast
Gray Iron ........................................................................ASTM A48 Grade 30
Ductile Iron .....................................................................ASTM A536-80 (65-45-12)
Bronze ..........................................................................ASTM B62 (85-5-5-5) & AWWA C-800
Stainless Steel ...............................................................ASTM A743-70 Grade CF-8 (T304)
ASTM A743-70 Grade CF-8M
Fabricated
Stainless Steel ...............................................................ASTM A743-70 Grade CF-8 (T304)
ASTM A743-70 Grade CF-8M
Mild Steel .......................................................................ASTM A36 & ASTM A-7
Bronze ..........................................................................ASTM B53-46 Alloy A
Rubber
SBR (BUNA S) ...............................................................AWWA C111, ANSI 21.11
ASTM D2000 80 M 4AA 809
NBR (BUNA N)...............................................................ASTM D2000 BA 508
Neoprene ......................................................................ASTM D2000
EPDM ..........................................................................ASTM D2000
Viton
..........................................................................ASTM D1418
Fasteners
Alloy Steel ......................................................................AWWA C111 & AISI 140 (HSLA)
Steel
..........................................................................ASTM A320 Grade B8
Stainless Steel ...............................................................ASTM A743-70 Grade CF-8 (T304)
ASTM A-70 Grade CF 8M
Bronze ..........................................................................ASTM A98 Alloy B
Cast Iron.........................................................................AWWA C111
Zinc plating.....................................................................AISI 40
Anodes ..........................................................................ASTM B418 Type II
Coatings
Epoxy fusion bond..........................................................Corrosion Protective Epoxy Coating
(AWWA C213-79)
Epoxy coal tar ................................................................AWWA C210-78
Couplings
AISI
ANSI
ASTM
AWWA
Note:
..........................................................................AWWA C219-91
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
0.7.1
GASKETS
RUBBER
PRODUCT INFORMATION
ROBAR
COMMON USES
SBR
(Styrene Butadiene)
(Buna S)
150
Nitrile (NBR)
(Acrylonitrile Butadiene)
(BUNA-N)
150
Neoprene (CR)
(Polychloroprene)
200
EPDM
(Ethylene Propylene)
250
300
DESCRIPTION
Viton4; Fluorel
(FPM)4
(Fluorocarbon)
Note:
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
0.8.0
CHART
PIPE OUTSIDE DIAMETERS
ROBAR
STEEL
SIZE
DUCTILE
SIZE
CAST
SIZE
ASBESTOS CEMENT
SIZE
CAST
IRON
A/C
ME
A/C
RB
CLASS 100
A/C
RB
CLASS 150
A/C
RB
CLASS 200
3.96
3.74 (100)
3.84 (150)
3.93 - 3.95
4.03 - 4.13
4.17 - 4.29
4.80
5.00
4.64 (100)
4.81 (150)
4.70 - 5.26
4.97 - 5.32
5.22 - 5.57
6.63
6.90
7.10
6.91
7.05 - 7.48
7.10 - 7.43
7.23 - 7.60
200
8.63
9.05
9.30
9.11
9.22 - 9.75
9.39 - 9.75
9.39 - 9.81
10
250
10.75
11.10
11.40
12
300
12.75
13.20
13.50
14
350
14.00
15.30*
15.65
16
400
16.00
17.40*
17.80
18
450
18.00
19.50*
19.92
20
500
20.00
21.60*
22.06
22.12 - 24.66
24
600
24.00
25.80*
26.32
IN.
MM.
50
2.38
2.5
65
2.88
75
3.50
100
4.50
150
3.80
B.C.
Phone:
Fax:
E-mail:
22.68
QUEBEC Phone:
Fax:
0.9.1
SECTION 1 - CONTENTS
ROBAR
COUPLINGS
1.1.2
1408
1.2.0
1406
1.3.1
1506
1.4.0
1507
1.5.1
1509
1.6.0
1519
1.7.1
1706
1.52.1
1708
1.52.2
1716
1.53.1
1718
1.53.2
REDUCING COUPLINGS
Table
1.10.2
1408R
1.12.0
1406R
1.13.1
1506R
1.14.0
1507R
1.15.1
1509R
1.16.0
1519R
1.17.1
1.20.0
1180
Isolating Boots
1.21.1
1410
1.22.0
FABRICATED COUPLINGS
1606
1.50.1
1808
1.61.1
1838
1.62.1
1848
1.63.1
1858
1.64.1
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.0.1
ROBAR
FIRST END
RANGE
END BY
PIPE
CODE X
LOW
OD HIGH*
NOM.
PIPE
SIZE
(Actual)
2.38
2.38
SECOND END
MAX.
RANGE
PRESS.
FASTENERS
END
PIPE
(Working)
NO.
CODE
LOW
OD HIGH*
LBS./IN.2 DIA. x LENGTH
SHIPPING
SLEEVE
WT.***
LENGTH
(IN.)
(LBS.) (KG.)
(Actual)
2.50
2.38
2.38
2.85
2.85
3.13
X
3.45
3.50
3.45
3.50
3.55
3.74
3.74
3.92
3.45
3.50
3.45
3.50
3.60 4T
3.75
3.75
4.05 F3
4.05
4.05
4.35 F3
4
X
4.40
4.50
4.40
4.50
4.60 D3
4.74
4.80
4.74
4.80
5.10 A1
5.10
5.10
5.30 E5
5.85
6.00
5.85
6.00
6.15 F3
6.15
6.15
6.45 F3
6
6.50
6.63
X
6.50
6.63
6.70 D3
6.86
6.90
6.86
6.90
7.10 A1
7.15
7.15
7.35 E5
7.90
8.00
7.90
8.00
8.25 F3
8.25
8.25
8.55 F3
8
8.55
8.63
X
8.55
8.63
8.75 D3
8.99
9.05
8.99
9.05
9.30 A1
9.30
9.30
9.50 E5
9.85 10.00 10.20 F4
9.85 10.00
10.20
10.20
10.50 F4
10.60 10.75 10.90 D4
10.60 10.75
10**
X
11.10 11.10 11.40 B2
11.10 11.10
11.55
11.55
11.75 A1
11.90 12.00 12.10 E5
11.90 12.00
SERIES 2 (STANDARD STEEL AND DUCTILE SIZES ONLY)
10.60 10.75 10.90 S9
X
10.60 10.75
10
11.10 11.10 11.40 G8
11.10 11.10
3
2.50
3.13
3.55
3.92
3.60
4.05
4.35
4.60
5.10
5.30
6.15
6.45
6.70
7.10
7.35
8.25
8.55
8.75
9.30
9.50
10.20
10.50
10.90
11.40
11.75
12.10
F3
F3
D3
A1
E5
F3
F3
D3
A1
E5
F3
F3
D3
A1
E5
F4
F4
D4
B2
A1
E5
10.90
11.40
S9
G8
175
2
5/8 x 5
3.6
175
3
5/8 x 5
11
5.0
4
5/8 x 8
17
7.7
4
5/8 x 10.5
20
9.0
5
5/8 x 8
25
11.3
5
5/8 x 10.5
33
14.9
6
5/8 x 8
30
13.6
6
5/8 x 10.5
39
17.7
175
7
5/8 x 10.5
59
26.8
175
7
5/8 x 10.5
49
22.3
175
175
175
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.1.2
ROBAR
FIRST END
RANGE
END BY
PIPE
CODE X
LOW
OD HIGH*
NOM.
PIPE
SIZE
(Actual)
SECOND END
MAX.
RANGE
PRESS.
FASTENERS
END
PIPE
(Working)
NO.
CODE
LOW
OD HIGH*
LBS./IN.2 DIA. x LENGTH
SHIPPING
SLEEVE
WT.***
LENGTH
(IN.)
(LBS.) (KG.)
(Actual)
12.00
12.00
12.30 F4
12.30
12.30
12.60 F4
12.60 12.75 12.90 D4
X
12.60 12.75
12**
13.20 13.20 13.60 B2
13.20 13.20
13.80 14.00 14.10 A1
13.80 14.00
14.10
14.10
14.35 E5
SERIES 2 (STANDARD STEEL AND DUCTILE SIZES ONLY)
12.60 12.75 12.90 S9
12.60 12.75
12
X
13.20 13.20 13.50 G8
13.20 13.20
14.60
14.60
14.90 F2
15.30 15.30 15.70 B2
15.30 15.30
14
X
15.80 16.00 16.25 A1
15.80 16.00
16.40
16.40
16.80 E5
17.40 17.40 17.80 B2
17.40 17.40
16
X
17.80 18.00 18.20 A1
17.80 18.00
18.40
18.40
18.80 E5
18.80
18.80
19.20 B1
18
19.10 19.50 19.70 A2
X
19.10 19.50
19.70 20.00 20.25 E5
19.70 20.00
20.80
20.80
21.35 B1
20
21.35 21.60 21.75 A2
X
21.35 21.60
21.75 22.00 22.25 E5
21.75 22.00
22.95
22.95
23.35 B1
22
23.45
X
23.45
23.85 A2
23.75 24.00 24.25 E5
23.75 24.00
25.70
25.80
A2
25.70
25.80
26.00
24
X
26.10
26.10
26.32 E5
12.30
12.60
12.90
13.60
14.10
14.35
F4
F4
D4
B2
A1
E5
12.90
13.50
14.90
15.70
16.25
16.80
17.80
18.20
18.80
19.20
19.70
20.25
21.35
21.75
22.25
23.35
23.85
24.25
26.00
26.32
S9
G8
F2
B2
A1
E5
B2
A1
E5
B1
A2
E5
B1
A2
E5
B1
A2
E5
A2
E5
175
8
5/8 x 10.5
74
33.6
175
8
5/8 x 10.5
55
25.0
175
9
5/8 x 10.5
100
45.5
175
10
5/8 x 10.5
107
48.6
150
12
5/8 x 10.5
129
58.6
150
12
5/8 x 10.5
140
63.6
150
13
5/8 x 10.5
156
70.9
150
14
5/8 x 14.0
10
285
129.6
HOW TO ORDER:
Determine the product number (1408, etc.) and high limit of range for each end of the coupling (see page 1.1.2,
1.1.3), and then use the appropriate ordering code as shown in the following example.
To couple a 6" Steel pipe (6.63" OD) to a 6" C900 PVC pipe (6.90" OD), the ordering code is:
1408
6.70"
x
7.10"
product
number
first end
high limit
of range
second end
high limit
of range
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.1.3
ROBAR
SIZES AVAILABLE:
2" to 24" Nominal Pipe OD.
APPLICATIONS:
ROBAR 1408 Straight and Transition Couplings are
used to make a non-restrained connection between
two pipes of the same nominal size but with same or
different OD's.
first end
high limit
of range
second end
high limit
of range
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.2.0
ROBAR
SIZES AVAILABLE:
2" to 24" Nominal Pipe OD.
APPLICATIONS:
ROBAR 1406 Straight and Transition Couplings are
used to make a non-restrained connection between
two pipes of the same nominal size but with same or
different OD's. Used in areas where bolt corrosion is a
factor. The 1406 is supplied with Stainless Steel
fasteners.
first end
high limit
of range
second end
high limit
of range
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.3.1
ROBAR
SIZES AVAILABLE:
2" to 24" Nominal Pipe OD.
APPLICATIONS:
ROBAR 1506 Straight and Transition couplings are
used to make a non-restrained connection between
two pipes of the same nominal size but with same or
different ODs. Used in areas where corrosion is a
factor, the 1506 body is Epoxy coated and Stainless
Steel fasteners are supplied.
first end
high limit
of range
second end
high limit
of range
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.4.0
ROBAR
SIZES AVAILABLE:
2" to 24" Nominal Pipe OD.
APPLICATIONS:
ROBAR 1507 Straight and Transition Couplings are
used to make a non-restrained connection between
two pipes of the same nominal size but with same or
different OD's. Used in areas where corrosion is a
factor, the 1507 body and fasteners are Epoxy coated.
Zinc anodes are supplied with this coupling.
first end
high limit
of range
second end
high limit
of range
Note:
Coupling nuts are not Epoxy coated. We ensure continuity by removing the Epoxy coating from the
underside of the bolt head and bolt head bearing surface of the end ring.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.5.1
ROBAR
SIZES AVAILABLE:
2" to 24" Nominal Pipe OD.
APPLICATIONS:
ROBAR 1509 Straight and Transition Couplings are
used to make a non-restrained connection between
two pipes of the same nominal size but with same or
different ODs. Used in areas where corrosion is factor,
the 1509 body and fasteners are Epoxy coated.
first end
high limit
of range
second end
high limit
of range
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.6.0
ROBAR
SIZES AVAILABLE:
2" to 24" Nominal Pipe OD.
APPLICATIONS:
ROBAR 1519 non-restrained Couplings are specially
designed (cathodically fitted) to allow for electrical
continuity throughout the entire fitting.
Sacrificial
anodes* are recommended to protect the coupling
assembly as long as "continuity" is maintained
between the coupling components.
To ensure
"isolation" between metal pipes, the use of ROBAR
1180 Isolation Boots is recommended. (See "ROBAR
1180 Isolation Boot" product information sheet, page
1.21.1). Isolation Boots are available in Straight,
Transition or Reducing styles.
* Anodes not supplied.
anodes.
HOW TO ORDER:
Determine the product number (1519, etc.) and the high limit of range for each end of the coupling (see page
1.1.2, 1.1.3), and then use the appropriate ordering code as shown in the following example.
To couple a 6" Steel pipe (6.63" OD) to a 6" C900 PVC pipe (6.90" OD), the ordering code is:
1519
6.70"
x
7.10"
product
number
first end
high limit
of range
second end
high limit
of range
Note:
Coupling nuts are not Epoxy coated. We ensure continuity by removing the Epoxy coating from the
underside of the bolt head and bolt head bearing surface of the end ring.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.7.1
ROBAR
ROBAR
IPF
SIZES AVAILABLE:
4" to 12" Nominal Pipe OD.
APPLICATIONS:
ROBAR 1706 Couplings are used to make a nonrestrained connection between two pipes of the
same nominal size but with same or different OD's.
Used in areas where corrosion is a factor, this
coupling is fusion bonded epoxy to NSF-61
specifications and comes coated with Stainless
Steel bolts and nuts.
Epoxy coated Center Sleeve and End Rings, Dacromet Coated Fasteners.
HOW TO ORDER:
Determine the product number (1706 or 1708) and order the nominal size you require (see below), and then use
the appropriate ordering code as shown in the following example.
To couple (using Stainless Steel fasteners) an 8" Steel pipe (8.63" OD) to an 8" C900 PVC pipe (9.05" OD),
the ordering code is:
1706
x 8"
CAUTION
COUPLING RANGES
2
2
4
6
8
10
12
NOTE:
= 2.32 - 2.87
= 2.83 - 3.35
= 4.25 - 5.04
= 6.26 - 7.17
= 8.58 - 9.25
= 10.67 - 11.38
= 12.68 - 13.39
B.C.
1.52.1
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
IPF
SIZES AVAILABLE:
4" to 12" Nominal Pipe OD.
APPLICATIONS:
ROBAR 1708 Couplings are used to make a nonrestrained connection between two pipes of the
same nominal size but with same or different OD's.
Used in areas where corrosion is not a factor, the
coupling is fusion bonded epoxy coated to NSF-61
specs and comes with Dacromet coated bolts and
nuts.
COUPLING RANGES
CAUTION
2
2
4
6
8
10
12
= 2.32 2.87
= 2.83 3.35
= 4.25 5.04
= 6.26 7.17
= 8.58 9.25
= 10.67 11.38
= 12.68 13.39
These products do not restrain axial pipe movement
B.C.
1.52.2
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
ROBAR
ROBAR
IPF
SIZES AVAILABLE:
4", 6 and 8" Nominal Pipe OD.
APPLICATIONS:
ROBAR 1718 Couplings are used to make a nonrestrained connection between two pipes of the
same nominal size but with same or different OD's.
Used in areas where corrosion is a factor, the
coupling is fusion bonded epoxy coated to NSF-61
specs and comes with Dacromet coated bolts and
nuts.
Epoxy coated Center Sleeve and End Rings, Dacromet coated Fasteners.
HOW TO ORDER:
Determine the product number (1716 or 1718) and order the nominal size you require (see below), and then use
the appropriate ordering code as shown in the following example.
To couple (using Stainless Steel fasteners) a 6" Steel pipe (6.63" OD) to a 6" AC pipe (7.45" OD), the ordering
code is:
1716
x 6"
CAUTION
COUPLING RANGES
4
6
8
= 4.21 5.28
= 6.22 7.56
= 8.58 9.92
These products do not restrain axial pipe movement
NOTE:
B.C.
1.53.1
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
ROBAR
ROBAR
IPF
SIZES AVAILABLE:
4", 6 and 8" Nominal Pipe OD.
APPLICATIONS:
ROBAR 1718 Couplings are used to make a nonrestrained connection between two pipes of the
same nominal size but with same or different OD's.
Used in areas where corrosion is not a factor, the
coupling is fusion bonded epoxy coated to NSF-61
specs and comes with Dacromet coated bolts and
nuts.
Epoxy coated Center Sleeve and End Rings, Stainless Steel Fasteners.
HOW TO ORDER:
Determine the product number (1718 or 1716) and order the nominal size you require (see below), and then use
the appropriate ordering code as shown in the following example.
To couple (using Dacromet Coated Steel fasteners) a 4" Steel pipe (4.50" OD) to a 4" AC pipe (5.25" OD), the
ordering code is:
1718
x 4"
CAUTION
COUPLING RANGES
4
6
8
= 4.21 5.28
= 6.22 7.56
= 8.58 9.92
B.C.
1.53.2
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
REDUCING COUPLINGS
CAST DUCTILE IRON
SELECTION TABLE
ROBAR
FIRST END
RANGE
END BY
PIPE
CODE X
LOW
OD HIGH*
NOM.
PIPE
SIZE
(Actual)
5.85
6.15
6.50
6.86
7.15
6
x
4
7.90
8.25
8.55
8.99
9.30
9.85
10.20
10.60
11.10
11.55
11.90
12.00
12.30
12.60
13.20
13.80
14.10
14.60
15.30
15.80
16.40
8
x
6
10
x
8
12
x
10
14
x
12
17.10
17.40
17.80
18.40
18.80
19.10
19.70
16
x
14
18
x
16
6.00
6.63
6.90
8.00
8.63
9.05
10.00
10.75
11.10
12.00
12.75
13.20
14.00
15.30
16.00
17.40
18.00
19.50
20.00
SECOND END
MAX.
RANGE
PRESS.
FASTENERS
END
PIPE
NO.
CODE (Working)
LOW
OD HIGH*
LBS./IN.2 DIA. x LENGTH
SHIPPING
SLEEVE
WT.**
LENGTH
(IN.)
(LBS.) (KG.)
(Actual)
6.15
6.45
6.70
7.10
7.35
F3
F3
D3
A1
E5
8.25
8.55
8.75
9.30
9.50
10.20
10.50
10.90
11.40
11.75
12.10
12.30
12.60
12.90
13.60
14.10
14.35
14.90
15.70
16.25
16.80
F3
F3
D3
A1
E5
F4
F4
D4
B2
A1
E5
F4
F4
D4
B2
A1
E5
F2
B2
A1
E5
17.40
17.80
18.20
18.80
19.20
19.70
20.25
F2
B2
A1
E5
B1
A2
E5
3.45
3.75
4.05
4.40
4.74
5.10
5.85
6.15
6.50
6.86
7.15
7.90
8.25
8.55
8.99
9.30
9.85
10.20
10.60
11.10
11.55
11.90
12.00
12.30
12.60
13.20
13.80
14.10
14.60
15.30
15.80
16.40
17.10
17.40
17.80
18.40
4.00
4.50
4.80
6.00
6.63
6.90
8.00
8.63
9.05
10.00
10.75
11.10
12.00
12.75
13.20
14.00
15.30
16.00
17.40
18.00
3.60
4.05
4.35
4.60
5.10
5.30
6.15
6.45
6.70
7.10
7.35
8.25
8.55
8.75
9.30
9.50
4T
F3
F3
D3
A1
E5
F3
F3
D3
A1
E5
F3
F3
D3
A1
E5
10.20
10.50
10.90
11.40
11.75
12.10
12.30
12.60
12.90
13.60
14.10
14.35
14.90
15.70
16.25
16.80
17.40
17.80
18.20
18.80
F4
F4
D4
B2
A1
E5
F4
F4
D4
B2
A1
E5
F2
B2
A1
E5
F2
B2
A1
E5
175
5
5/8 x 8
25
11.4
175
6
5/8 x 8
34
15.5
175
7
5/8 x 10.5
51
23.2
175
8
5/8 x 10.5
83
37.7
175
9
5/8 x 10.5
111
50.5
175
10
5/8 x 10.5
124
56.4
150
12
5/8 x 10.5
132
60.0
Continued...
Note:
*
**
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.10.2
REDUCING COUPLINGS
CAST DUCTILE IRON
SELECTION TABLE
ROBAR
NOM.
PIPE
SIZE
FIRST END
RANGE
END BY
PIPE
CODE X
LOW
OD HIGH*
(Actual)
20
x
16
20.80
21.35
21.75
20
x
18
22
x
16
20.80
21.35
21.75
22.95
23.45
23.75
22
x
18
22
x
20
24
x
22
22.95
23.45
23.75
22.95
23.45
23.75
25.70
26.10
21.60
22.00
21.60
22.00
24.00
24.00
24.00
25.80
SECOND END
MAX.
RANGE
END
PRESS.
FASTENERS
PIPE
CODE (Working)
NO.
LOW
OD HIGH*
LBS./IN.2 DIA. x LENGTH
SHIPPING
SLEEVE
WT.**
LENGTH
(IN.)
(LBS.) (KG.)
(Actual)
21.35
21.75
22.25
B1
A2
E5
21.35
21.75
22.25
23.35
23.85
24.25
B1
A2
E5
B1
A2
E5
23.35
23.85
24.25
23.35
23.85
24.25
26.00
26.32
B1
A2
E5
B1
A2
E5
A2
E5
17.10
17.40
17.80
18.40
18.80
19.10
19.70
17.10
17.40
17.80
18.40
18.80
19.10
19.70
20.80
21.35
21.75
22.95
23.45
23.75
17.40
18.00
19.50
20.00
17.40
18.00
19.50
20.00
21.60
22.00
24.00
17.40
17.80
18.20
18.80
19.20
19.70
20.25
17.40
17.80
18.20
18.80
19.20
19.70
20.25
21.35
21.75
22.25
23.35
23.85
24.25
F2
B2
A1
E5
B1
A2
E5
F2
B2
A1
E5
B1
A2
E5
B1
A2
E5
B1
A2
E5
150
150
150
12
5/8 x 10.5
12
5/8 x 10.5
13
5/8 x 10.5
161
73.2
156
70.9
272
123.6
150
13
5/8 x 10.5
268
121.8
150
13
5/8 x 10.5
275
125.0
150
14
5/8 x 14.0
8.5
300
136.4
first end
high limit
of range
second end
high limit
of range
Note:
*
**
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.10.3
ROBAR
SIZES AVAILABLE:
4" to 24" Nominal Pipe OD.
APPLICATIONS:
ROBAR 1408R Reducing Couplings are used to make a
non-restrained connection between two pipes of different
nominal sizes.
first end
high limit
of range
second end
high limit
of range
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
1.12.0
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
Effective: January 1, 2000
ROBAR
SIZES AVAILABLE:
4" to 24" Nominal Pipe OD.
APPLICATIONS:
ROBAR 1406R Reducing Couplings are used to make a
non-restrained connection between two pipes of different
nominal sizes. Where bolt corrosion is a factor, the
1406R is supplied with Stainless Steel fasteners.
first end
high limit
of range
second end
high limit
of range
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
Effective: January 1, 2000
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
1.13.1
ROBAR
SIZES AVAILABLE:
4" to 24" Nominal Pipe OD.
APPLICATIONS:
ROBAR 1506R Reducing Couplings are used to make a
non-restrained connection between two pipes of different
nominal sizes. Used in areas where corrosion is a
factor, the 1506R body is Epoxy coated and Stainless
Steel fasteners are supplied.
first end
high limit
of range
second end
high limit
of range
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
1.14.0
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
Effective: January 1, 2000
ROBAR
SIZES AVAILABLE:
4" to 24" Nominal Pipe OD.
APPLICATIONS:
ROBAR 1507R Reducing Couplings are used to make a
connection between two pipes of different nominal sizes.
Used in areas where corrosion is a factor, the 1507R
body and fasteners are Epoxy coated. Zinc anodes are
supplied with this coupling.
Note:
first end
high limit
of range
second end
high limit
of range
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
Effective: January 1, 2000
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
1.15.1
ROBAR
SIZES AVAILABLE:
4" to 24" Nominal Pipe OD.
APPLICATIONS:
ROBAR 1509R Reducing Couplings are used to make a
non-restrained connection between two pipes of different
nominal sizes. Used in areas where corrosion is a factor
the 1509R body and fasteners are Epoxy coated.
first end
high limit
of range
second end
high limit
of range
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
1.16.0
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
Effective: January 1, 2000
ROBAR
SIZES AVAILABLE:
2" to 24" Nominal Pipe OD.
APPLICATIONS:
ROBAR 1519R Reducing Couplings are used to make a
non-restrained connection between two pipes of different
nominal sizes.
They are specially designed
(cathodically fitted) to allow for electrical continuity
throughout the entire fitting. Sacrificial anodes* are
recommended to protect the coupling assembly as long
as "continuity" is maintained between the coupling
components.
To ensure "isolation" between metal
pipes, the use of ROBAR 1180 Isolation Boots is
recommended. (See "ROBAR 1180 Isolation Boot"
product information sheet, page 1.1.1). Isolation Boots
are available in Straight, Transition or Reducing styles.
* Anodes not supplied.
MATERIAL SPECIFICATION: - COUPLING CONFORMS TO AWWA C219 - 91
Center Sleeve: Cast Ductile Iron (ASTM A536).
End Rings:
Cast Ductile Iron (ASTM A536).
Gaskets:
SBR (Buna S) Rubber (AWWA C111). Other compounds available.
Fasteners:
5/8" NC HSLA Steel, Epoxy coated bolts (AWWA C111)
3/8" NC T304 set screws, zinc plated steel (AISI 40).
Coating:
Corrosion Protective Epoxy coating (AWWA C213-79).
OTHER CAST COUPLING CONFIGURATIONS: (See Product Information for the following)
1529R: Designed for cathodically protected applications using mechanically attached anodes (Formerly
designated as 1519E).
HOW TO ORDER:
Determine the product number (1519R, etc.) and the high limit of range for each end of the coupling
(see page 1.10.2, 1.10.3), and then use the appropriate ordering code as shown in the following example.
To couple a 6" C900 PVC pipe (6.90" OD) to a 4" Steel pipe (4.50" OD), the ordering code is:
1519R
7.10"
x
4.60"
product
number
first end
high limit
of range
second end
high limit
of range
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
Effective: January 1, 2000
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
1.17.1
ROBAR
F-SERIES
SIZES AVAILABLE:
4" to 14" Nominal Pipe OD.
APPLICATIONS:
ROBAR 1120 Special gaskets are used in conjunction
with ROBAR couplings to accommodate transitions to
special diameter pipe.
MATERIAL SPECIFICATION:
Gasket:
SBR (Buna S) Rubber (AWWA C111). Other compounds available.
HOW TO ORDER:
Determine the product number (1120), the high limit of range for the gasket required (see table below) and use the
appropriate ordering code as shown in the following example.
For a gasket with a range of 5.85" to 6.15" the ordering code is:
1120
6.15"
product
number
high limit
of range
Note:
*
**
B.C.
USE **
CENTER
END
SLEEVE
RING
4"
4-3
STANDARD
6"
6-3
STANDARD
8"
8-3
STANDARD
10"
10-4
STEEL SIZE
12"
12-4
STEEL SIZE
14"
14-2
STANDARD
All dimensions are in inches
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.20.0
ROBAR
T-SERIES
SIZES AVAILABLE:
3 to 12" Nominal Pipe OD.
APPLICATIONS:
ROBAR 1120 Special gaskets are used in conjunction
with ROBAR couplings and FCAs to accommodate
transitions to special diameter pipe.
MATERIAL SPECIFICATION:
Gasket:
SBR (Buna S) Rubber (AWWA C111). Other compounds available.
HOW TO ORDER:
Determine the product number (1120), the high limit of range for the gasket required (see table below) and use the
appropriate ordering code as shown in the following example.
For a gasket with a range of 5.65" to 5.95" the ordering code is:
1120
5.95"
product
number
high limit
of range
USE **
CENTER
END
SLEEVE
RING
4 Std.
4T
5.95
6 Std.
6T
10
10.60 10.90
10 Std.
10T
12
12.60 12.90
12 Std.
12T
5.65
Note:
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.20.1
ROBAR
STANDARD SIZES:
4" to 24" Nominal Pipe OD. Larger sizes are available
upon request.
APPLICATIONS:
ROBAR 1180 Isolating Boots are used in conjunction
with ROBAR couplings to separate pipe ends in
cathodically protected systems.
MATERIAL SPECIFICATION:
Boot:
SBR (Buna S) Rubber compounded for water service and high dielectric value.
(ASTM D2000-80 AA 615). Not available in other compounds.
HOW TO ORDER:
Determine the product number (1180) and actual OD of the pipe to be isolated and then use the appropriate
ordering code as shown in the following example.
For a 6" Ductile Iron Pipe (6.90" OD), the ordering code is:
1180
6.90"
product
number
actual pipe
OD
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.21.1
ROBAR
nom. pipe
size
i.e. 1410 - 8
NOMINAL
PIPE
SIZE
4
6
8
10
12
Note:
CAP
OD
5.10
7.10
9.30
11.40
13.60
OUTLET
APPROXIMATE
PLUG
SHIPPING WEIGHT
QUANTITY
(LBS.)
(KG.)
1
3.0
1.36
1
5.0
0.26
1
6.8
3.06
2
15.0
6.80
2
23.8
10.77
All dimensions are in inches
End capped couplings must be suitably blocked or restrained to resist hydraulic end thrust.
B.C.
END
ASSEMBLY
4A1
6A1
8A1
10B2
12B2
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.22.0
1606 COUPLINGS
FABRICATED STAINLESS STEEL
PRODUCT INFORMATION
ROBAR
STANDARD SIZES:
4" to 24" Nominal Pipe OD. Larger Couplings (up to
60" OD) are available upon request.
APPLICATIONS:
ROBAR 1606 Couplings are used to make a nonrestrained connection between pipes of the same
outside diameter. This Coupling is fabricated with a
range of .30" (pipe OD .15") and therefore is best
suited for smooth pipe with a uniform outside diameter
(eg. Steel, PVC, Ductile Iron and HDPE).
MATERIAL SPECIFICATION:
Body:
T304 Stainless Steel, also available in T316 Stainless steel.
Gaskets:
SBR (Buna S) Rubber (ASTM D2000). Other compounds available.
Fasteners:
5/8" NC T304 Stainless Steel - fully passivated*.
HOW TO ORDER:
Determine the product number (1606), number of sections, actual pipe OD, coupling width (see page 1.50.2), and
then order by using appropriate ordering code as shown in the following example.
If a two section (Style 2) coupling is required with a 12" body length, for a 10" Steel pipe (10.75" OD), the ordering
code is:
1606
2
10.75" x
12"
product
number
number
of
sections
actual pipe
OD
coupling
width
Note:
"Passivated" refers to chemical treatment after welding to return stainless steel to its original high
corrosion resistance and appearance.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.50.1
1606 COUPLINGS
FABRICATED STAINLESS STEEL
PRODUCT INFORMATION
ROBAR
NOMINAL
PIPE
SIZE
MAXIMUM
PRESSURE
(Working)
LBS./IN.2
4
6
8
10
12
14
16
18
20
22
24
150
150
150
150
150
125
100
100
100
100
100
Note:
STYLE
1
6" SHELL
6 lbs.
6 lbs.
7 lbs.
16 lbs.
17 lbs.
18 lbs.
19 lbs.
24 lbs.
25 lbs.
34 lbs.
35 lbs.
37 lbs.
39 lbs.
41 lbs.
46 lbs.
68 lbs.
46 lbs.
69 lbs.
48 lbs.
72 lbs.
50 lbs.
78 lbs.
52 lbs.
84 lbs.
All dimensions are in inches
Other sizes and pressure ratings are available. Please contact ROBAR's Technical Sales Department
for additional information.
Bolt Torque limit for all sizes is 80 ft./lbs.
Maximum working pressures are achieved with smooth OD pipes and with careful installation. Rough
pipe surfaces and careless installation will reduce attainable pressures.
ROBAR 9626 Adjustable Stainless Steel Inserts are recommended for use on Polyethylene Pipe.
4.80" is the minimum OD 1606 Couplings can be sized to fit.
B.C.
STYLE
3
24" SHELL
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.50.2
1808 COUPLINGS
FABRICATED STEEL
PRODUCT INFORMATION
ROBAR
ROBAR
SERIES 200
BAKER
STANDARD SIZES:
4" to 96" Nominal Pipe OD.
upon request.
APPLICATIONS:
Fabricated 1808 Non-Restraining Couplings are used
to flexibly couple larger diameter Steel and Cast Iron
pipe lines. Accommodates 3/8" expansion-contraction
per joint, and deflection up to 4, depending on size
and length of Center Sleeve.
sleeve
length
actual pipe
OD
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.61.1
1808 COUPLINGS
FABRICATED STEEL
PRODUCT INFORMATION
ROBAR
ROBAR
NOMINAL
PIPE
SIZE
14
16
18
20
22
24
SERIES 200
BAKER
ORDERING
CODE*
OD
PIPE
CENTER
SLEEVE
TxL
END
RING
OD
OVERALL
LENGTH
FASTENERS
NO. x DIA.
x LENGTH
PN-7-1400-2
PN-10-1400-2
PN-7-1530-3
PN-10-1530-3
PN-7-1600-2
PN-10-1600-2
PN-7-1740-3
PN-10-1740-3
PN-7-1800-2
PN-10-1800-2
PN-7-1950-3
PN-10-1950-3
PN-7-2000-2
PN-1-2000-2
PN-7-2160-3
PN-10-2160-3
PN-7-2200-2
PN-10-2200-2
PN-7-2370-3
PN-10-2370-3
PN-7-2400-2
PN-10-2400-2
PN-7-2580-3
PN-10-2580-3
14.00
14.00
15.30
15.30
16.00
16.00
17.40
17.40
18.00
18.00
19.50
19.50
20.00
20.00
21.60
21.60
22.00
22.00
23.70
23.70
24.00
24.00
25.80
25.80
1/4 x 7
1/4 x 10
3/8 x 7
3/8 x 10
1/4 x 7
1/4 x 10
3/8 x 7
3/8 x 10
1/4 x 7
1/4 x 10
3/8 x 7
3/8 x 10
1/4 x 7
1/4 x 10
3/8 x 7
3/8 x 10
1/4 x 7
1/4 x 10
3/8 x 7
3/8 x 10
1/4 x 7
1/4 x 10
3/8 x 7
3/8 x 10
18 1/4
18 1/2
18 1/2
18 1/2
20 1/4
20 1/2
20 1/2
20 1/2
22 1/4
22 13/16
22 13/16
22 13/16
24 1/16
24 9/16
24 2/16
24 9/16
26 1/2
26 1/2
26 13/16
26 13/16
28 1/4
28 3/4
24 3/4
24 3/4
11
14
11
14
11
14
11
14
11
14
11
14
11
14
11
14
11
14
11
14
11
14
11
14
8 x 5/8 x 10 1/2
8 x 5/8 x 13 1/2
10 x 5/8 x 10 1/2
10 x 5/8 x 13 1/2
10 x 5/8 x 10 1/2
10 x 5/8 x 13 1/2
10 x 5/8 x 10 1/2
10 x 5/8 x 13 1/2
10 x 5/8 x 10 1/2
10 x 5/8 x 13 1/2
12 x 5/8 x 10 1/2
12 x 5/8 x 13 1/2
12 x 5/8 x 10 1/2
12 x 5/8 x 13 1/2
12 x 5/8 x 10 1/2
12 x 5/8 x 13 1/2
14 x 5/8 x 10 1/2
14 x 5/8 x 13 1/2
14 x 5/8 x 10 1/2
14 x 5/8 x 13 1/2
14 x 5/8 x 10 1/2
14 x 5/8 x 13 1/2
14 x 5/8 x 10 1/2
14 x 5/8 x 13 1/2
MAXIMUM
APPROXIMATE
PRESSURE
SHIPPING WEIGHT
(Working)
(LBS.)
(KG.)
LBS./IN.2
510
64
29.1
510
77
35.0
750
76
34.6
750
93
42.3
440
74
33.6
440
88
40.0
665
87
39.6
665
107
48.6
400
81
36.8
400
97
44.1
590
96
43.6
590
118
53.6
360
90
40.9
360
108
49.1
535
107
48.6
535
132
60.0
330
98
44.6
330
117
53.2
490
115
52.3
490
143
65.0
305
107
48.6
305
128
58.2
450
127
57.7
450
156
70.9
All dimensions are in inches
Note:
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.61.2
ROBAR
SERIES 212
ROBAR
BAKER
STANDARD SIZES:
12" to 24" Nominal Pipe OD. Transition Couplings
larger than 24" are available upon request.
APPLICATIONS:
Fabricated 1838 Transition Couplings are used to
make a non-restraining connection between two
different kinds of large diameter pipe of the same
nominal size, such as Steel, Cast Iron or AsbestosCement pipes.
first end
actual pipe
OD
second end
actual pipe
OD
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.62.1
ROBAR
ROBAR
NOMINAL
PIPE
SIZE
**12-14
**12-14
14
14
16
16
16
16
**16-18
**16-18
18
18
18
18
**18-20
**18-20
20
24
Note:
*
**
***
SERIES 212
BAKER
PRICING*
RANGE
LOW
HIGH
13.96
13.96
15.30
15.30
17.40
17.40
18.14
18.14
19.30
19.30
19.94
19.94
20.78
20.78
21.60
21.60
23.06
23.06
24.18
24.18
26.32
26.32
27.64
27.64
28.96
28.96
14.48
14.48
15.65
15.65
17.80
17.80
18.88
18.88
19.92
19.92
20.32
20.32
21.16
21.16
22.14
22.14
23.44
23.44
24.56
24.56
26.50
26.50
28.02
28.02
29.34
29.34
PRODUCT
CODE***
CENTER
SLEEVE
TxL
END
RING
OD
OVERALL
LENGTH
FASTENERS
NO. x DIA.
x LENGTH
PN-2
PN-3
PN-2
PN-3
PN-2
PN-3
PN-2
PN-3
PN-2
PN-3
PN-2
PN-3
PN-2
PN-3
PN-2
PN-3
PN-2
PN-3
PN-2
PN-3
PN-2
PN-3
PN-2
PN-3
PN-2
PN-3
1/4 x 10
3/8 x 10
1/4 x 10
3/8 x 10
1/4 x 10
3/8 x 10
1/4 x 10
3/8 x 10
1/4 x 10
3/8 x 10
1/4 x 10
3/8 x 10
1/4 x 10
3/8 x 10
1/4 x 10
3/8 x 10
1/4 x 10
3/8 x 10
1/4 x 10
3/8 x 10
1/4 x 10
3/8 x 10
1/4 x 10
3/8 x 10
1/4 x 10
3/8 x 10
19 1/4
19 1/2
20
20
22
22
23
23
24
24
24 1/2
24 1/2
25 1/2
25 1/2
26 1/2
26 1/2
28
28
29
29
31
31
33
33
33 1/2
24 1/2
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
8-5/8 x 14
8-5/8 x 14
10-5/8 x 14
10-5/8 x 14
10-5/8 x 14
10-5/8 x 14
10-5/8 x 14
10-5/8 x 14
12-5/8 x 14
12-5/8 x 14
12-5/8 x 14
12-5/8 x 14
12-5/8 x 14
12-5/8 x 14
12-5/8 x 14
12-5/8 x 14
12-5/8 x 14
12-5/8 x 14
14-5/8 x 14
14-5/8 x 14
14-5/8 x 14
14 5/8 x 14
16-5/8 x 14
16-5/8 x 14
16-5/8 x 14
16-5/8 x 14
This is not the coupling range. It is the minimum and maximum of popular sizes.
OD's must be specified.
PN is Product Number (1838, 1836, 1936 or 1939).
Couplings listed are for common sizes.
Transition Couplings larger than 24" are readily available. Contact ROBAR for sizes not listed
specifying Outside Diameters (OD) of pipes to be coupled.
Transitions with 0.250" differential are accomplished with a transition "tail" gasket on the smaller end.
Transitions above 0.250", and within the range covered on this sheet, are accomplished by expanding
the Center Sleeve and End Rings to accommodate the pipe size OD.
When ordering Epoxy coated products, specify Fusion Epoxy or Liquid Epoxy and whether the product
is to be Lined (L), Coated (C) or both (L/C).
B.C.
MAXIMUM
APPROXIMATE
PRESSURE
SHIPPING WEIGHT
(Working)
(LBS.)
(KG.)
LBS./IN. 2
510
65
29.6
750
80
36.4
510
79
35.9
750
91
41.4
440
90
40.9
665
104
47.3
440
96
43.6
665
110
50.0
440
101
45.9
665
116
52.7
400
99
45.0
590
115
52.3
400
104
47.3
590
120
54.6
360
108
49.1
535
125
56.8
310
116
52.7
490
134
60.9
310
121
55.0
450
140
63.6
275
131
59.6
380
151
68.6
275
138
62.7
380
160
72.7
275
143
65.0
380
166
75.5
All dimensions are in inches
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.62.2
ROBAR
ROBAR
SERIES 220
BAKER
STANDARD SIZES:
Large end, 6" to 48" Nominal Pipe OD. Small end, 4"
to 46" nominal pipe OD. Reducing Couplings larger
than 48" pipe OD are available upon request.
APPLICATIONS:
Fabricated 1848 Non-Restraining Steel Reducing
Couplings are used to flexibly couple two pipes of
different nominal size.
first end
actual pipe
OD
second end
actual pipe
OD
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.63.1
ROBAR
SERIES 220
ROBAR
BAKER
NOMINAL
PIPE
SIZE
6
8
9
10
11
12
13
14
15
16
17
18
19
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
NOMINAL
PIPE
SIZE
4
5
6
7
8
9
10
11
12
13
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
first end
actual pipe OD
second end
actual pipe OD
Note:
85 LBS.
31 LBS.
166 LBS.
38.6 KG.
14.1 KG.
52.7 KG.
Reducing Couplings larger than 48" are readily available. Contact the plant for pricing on sizes not
listed, specifying Outside Diameters of pipes to be coupled.
When ordering Epoxy coated products, specify Fusion Epoxy or Liquid Epoxy and whether the product
is to be Lined (L), Coated (C) or both (L/C).
B.C.
17" 14" -
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.63.2
ROBAR
ROBAR
SERIES 208
BAKER
STANDARD SIZES:
4" to 24" Nominal Pipe OD, Center Sleeve length from
10", 16" or 24". Sizes outside of those listed may be
ordered by contacting ROBAR .
APPLICATIONS:
Fabricated 1858 Long Body Couplings are used to join
pipes with widely separated ends.
center
sleeve length
actual pipe
OD
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.64.1
ROBAR
SERIES 208
ROBAR
BAKER
NOMINAL
PIPE
SIZE
4 1/2
10
12
ORDERING
CODE*
OD
PIPE
CENTER
SLEEVE
T x L**
END
RING
OD
OVERALL
LENGTH
FASTENERS
NO. x DIA.
x LENGTH
PN-10-4.50
PN-16-4.50
PN-24-4.50
PN-10-5.00
PN-16-5.00
PN-24-5.00
PN-10-6.00
PN-16-6.00
PN-24-6.00
PN-10-6.63
PN-16-6.63
PN-24-6.63
PN-10-8.00
PN-16-8.00
PN-24-8.00
PN-10-8.63
PN-16-8.63
PN-24-8.63
PN-10-10.00
PN-16-10.00
PN-24-10.00
PN-10-10.75
PN-16-10.75
PN-24-10.75
PN-10-12.00
PN-16-12.00
PN-24-12.00
PN-10-12.75
PN-16-12.75
PN-24-12.75
4.50
4.40
4.50
5.00
5.00
5.00
6.00
6.00
6.00
6.63
6.63
6.63
8.00
8.00
8.00
8.63
8.63
8.63
10.00
10.00
10.00
10.75
10.75
10.75
12.00
12.00
12.00
12.75
12.75
12.75
.258 x 10
.258 x 16
.258 x 24
.280 x 10
.280 x 16
.280 x 24
.250 x 10
.250 x 16
.250 x 24
.250 x 10
.250 x 16
.250 x 24
.250 x 10
.250 x 16
.250 x 24
.250 x 10
.250 x 16
.250 x 24
.250 x 10
.250 x 16
.250 x 24
.250 x 10
.250 x 16
.250 x 24
.250 x 10
.250 x 16
.250 x 24
.250 x 10
.250 x 16
.250 x 24
7 1/4
7 1/4
7 1/4
9 1/2
9 1/2
9 1/2
10 1/2
10 1/2
10 1/2
10
10
10
12 1/2
12 1/2
12 1/2
12 1/4
12 1/4
12 1/4
13 1/2
13 1/ 2
13 1/2
14 1/4
14 1/4
14 1/4
15 1/2
15 1/2
15 1/2
16 1/4
16 1/4
16 1/4
12
18
26
12 1/2
18 1/2
26 1/2
12 1/2
18 1/2
26 1/2
12 1/2
18 1/2
26 1/2
12 1/2
18 1/2
26 1/2
12 1/2
18 1/2
26 1/2
12 1/2
18 1/2
26 1/2
12 1/2
18 1/2
26 1/2
12 1/2
19 1/2
27 1/2
12 1/2
19 1/2
27 1/2
4-5/8 x 12 1/2
4-5/8 x 18 1/2
4-5/8 x 26 1/2
4-5/8 x 12 1/2
4-5/8 x 18 1/2
4-5/8 x 26 1/2
5-5/8 x 12 1/2
5-5/8 x 18 1/2
5-5/8 x 26 1/2
5-5/8 x 12 1/2
5-5/8 x 18 1/2
5-5.8 x 26 1/2
6-5/8 x 12 1/2
6-5/8 x 18 1/2
6-5/8 x 26 1/2
6-5/8 x 12 1/2
6-5/8 x 18 1/2
6-5/8 x 26 1/2
6-5/8 x 12 1/2
6-5/8 x 18 1/2
6-5/8 x 26 1/2
7-5/8 x 12 1/2
7-5/8 x 18 1/2
7-5/8 x 26 1/2
7-5/8 x 12 1/2
7-5/8 x 18 1/2
7-5/8 x 26 1/2
8-5/8 x 12 1/2
8-5/8 x 18 1/2
8-5/8 x 26 1/2
MAXIMUM
APPROXIMATE
PRESSURE
SHIPPING WEIGHT
(Working)
(LBS.)
(KG.)
LBS./IN2
1500
26
11.8
1500
33
15.0
1500
47
21.4
1250
30
13.6
1250
41
18.6
1250
52
23.6
1350
47
21.4
1350
52
23.6
1350
65
29.6
1200
32
14.6
1200
50
22.7
1200
66
30.0
1050
37
16.8
1050
68
30.9
1050
82
37.3
810
39
17.7
810
67
30.5
810
85
38.6
710
46
20.9
710
75
34.1
710
104
47.3
660
50
22.7
660
79
35.9
660
108
49.1
700
68
30.9
700
89
40.5
700
120
54.6
775
110
50.0
775
135
61.4
775
168
76.4
All dimensions are in inches
Continued...
Note:
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.64.2
ROBAR
ROBAR
NOMINAL
PIPE
SIZE
14
16
18
20
22
24
SERIES 208
BAKER
ORDERING
CODE*
OD
PIPE
CENTER
SLEEVE
T x L**
END
RING
OD
OVERALL
LENGTH
FASTENERS
NO. x DIA.
x LENGTH
MAXIMUM
PRESSURE
(Working)
LBS./IN.2
PN-10-14.00
PN-16-14.00
PN-24-14.00
PN-10-16.00
PN-16-16.00
PN-24-16.00
PN-10-18.00
PN-16-18.00
PN-24-18.00
PN-10-20.00
PN-16-20.00
PN-24-20.00
PN-10-22.00
PN-16-22.00
PN-24-22.00
PN-10-24.00
PN-16-24.00
PN-24-24.00
14
14
14
16
16
16
18
18
18
20
20
20
22
22
22
24
24
24
.250 x 10
.250 x 16
.250 x 24
.313 x 10
.313 x 16
.313 x 24
.313 x 10
.313 x 16
.313 x 24
.313 x 10
.313 x 16
.313 x 24
.313 x 10
.313 x 16
.313 x 24
.313 x 10
.313 x 16
.313 x 24
18 1/4
18 1/4
18 1/4
20 1/4
20 1/4
20 1/4
22 1/4
22 1/4
22 1/4
24
24
24
27
27
27
28 1/2
28 1/2
28 1/2
12 1/2
19 1/2
27 1/2
12 1/2
19 1/2
27 1/2
12 1/2
19 1/2
27 1/2
12 1/2
19 1/2
27 1/2
12 1/2
19 1/2
27 1/2
12 1/2
19 1/2
27 1/2
8-5/8 x 12 1/2
8-5/8 x 18 1/2
8-5/8 x 26 1/2
9-5/8 x 12 1/2
9-5/8 x 18 1/2
9-5/8 x 26 1/2
10-5/8 x 12 1/2
10-5/8 x 18 1/2
10-5/8 x 26 1/2
12-5/8 x 12 1/2
12-5/8 x 18 1/2
12-5/8 x 26 1/2
13-5/8 x 12 1/2
13-5/8 x 18 1/2
13-5/8 x 26 1/2
14-5/8 x 12 1/2
14-5/8 x 18 1/2
14-5/8 x 26 1/2
660
660
660
665
665
665
590
590
590
535
535
535
490
490
490
450
450
450
APPROXIMATE
SHIPPING WEIGHT
(LBS.)
(KG.)
126
57.3
138
62.7
172
78.2
145
65.9
170
77.3
206
93.6
152
69.1
178
80.9
240
109.1
160
72.7
195
88.6
265
120.5
180
81.8
225
102.3
300
136.4
210
95.5
250
113.6
330
150.0
All dimensions are in inches
HOW TO ORDER:
Determine the product number (1858, etc.), length of Center Sleeve, the actual pipe OD, and then order by using
the appropriate product code (see page 1.64., 1.64.3) as shown in the following example: (Order the Center
Sleeve length long enough to ensure room for deflection and for pipe expansion and contraction.)
For a 16" OD Steel pipe with a distance of 17" between pipe ends, allowing 2 1/2" each end for coupling to seal,
(total minimum required length of 22"), the ordering code is:
1858
24"
16.00"
product
number
center
sleeve length
actual pipe
OD
Note:
*
**
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
1.64.3
SECTION 2 - CONTENTS
SADDLES
ROBAR
SERVICE SADDLES
2408
2.1.1
2406
2.2.1
2506
2.3.1
2606
2.5.1
2616
Style 1
2.5.2
2626
Style 2
2.5.3
2636
Style 3
2.5.4
2706
2.6.1
ISOLATING SADDLES
2786
B.C.
Phone:
Fax:
E-mail:
2.8.0
QUEBEC Phone:
Fax:
2.0.1
SIZES AVAILABLE:
2" to 12" Nominal Pipe OD.
Outlets from 3/4" to 2" in AWWA taper (CC) or
female Iron pipe (IP).
Available in Single strap (SS) and double strap
(DS) styles.
Fits Steel (IPS), Cast Iron, Ductile Iron, and
AC/RB pipe.
Consult factory for other outlet sizes.
2408 SS
2408 DS
APPLICATIONS:
ROBAR 2408 Service Saddles are used to take a
service outlet off a transmission or distribution line. The
2408 Service Saddle is recommended for use on Ductile
Iron pipe and Steel pipe (Not recommended for C900).
Other products also recommended for Ductile Iron pipe,
Steel pipe as well as C900 pipe are 2506, 2606, and
2706 Service Saddles. See individual product sheets for
MATERIAL SPECIFICATION:
Saddle Body: Ductile Iron body (ASTM A536).
Gaskets:
SBR (Buna S) Rubber, (AWWA C111). Other compounds available.
Saddle Straps: 5/8" NC Low Alloy Steel (AWWA C111).
Fasteners:
5/8" NC HSLA, (AWWA C111).
Coating:
Two coats of Enamel.
OTHER CONFIGURATIONS: (See Product Information for each of the following)
2406: Enamel coated Cast Ductile body with T304 Stainless Steel straps.
2506: Epoxy coated Cast Ductile body with T304 Stainless Steel straps.
HOW TO ORDER:
Determine the product number ( 2408, 2406 or 2506), the high limit of range (see page 2.1.2), outlet size, outlet
thread, and strap style, and then use the appropriate ordering code as shown in the following example:
If a 6" Single strap (SS) Saddle with a 3/4" IP tap is required for a 6" Ductile Iron pipe (6.90" OD), the ordering code
is:
2408
7.50"
x
3/4"
IP SS
product
number
high limit
of range
outlet
size
outlet
thread
strap
style
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
2.1.1
ROBAR
2408 SS
2408 DS
Designed for tapping into Steel, Ductile Iron and Cast Iron pipe. Saddle straps and bodies are shaped to evenly and
safely distribute the clamping load to the pipe. When tightened, they conform to the various diameters in each
nominal size of pipe within specified working range. Refer to the ROBAR OD Chart (see page 0.9.1) for various pipe
diameters.
WORKING
NOMINAL
RANGE
PIPE
SIZE
LOW HIGH*
4
4.50
5.40
OUTLET SIZES
AWWA (CC)
OR
IRON PIPE (IP)
3/4 - 2
STRAP STYLE
SINGLE
(SS)
DOUBLE
(DS)
SS
8
10
12
6.62
8.62
7.50
9.62
10.75 12.12
12.75 14.38
3/4 - 2
3/4 - 2
3/4 - 2
3/4 - 2
(LBS.)
(KG.)
5.0
2.3
6.5
2.9
6.0
2.7
DS
8.5
3.9
6.5
2.9
DS
10.0
4.5
7.5
3.4
DS
11.5
5.2
11.5
5.2
12.5
5.7
DS
6
APPROXIMATE
SHIPPING WEIGHT
SS
SS
SS
SS
DS
Note:
B.C.
2.1.2
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
ROBAR
SIZES AVAILABLE:
2" to 12" Nominal Pipe OD.
Outlets from 3/4" to 2" in AWWA taper (CC) or
female Iron pipe (IP).
Available in Single strap (SS) or Double strap
(DS) styles.
Fits Steel (IPS), Cast Iron and Ductile Iron
pipe.
Consult factory for other outlet sizes.
APPLICATIONS:
ROBAR 2406 Service Saddles are used to take a
service outlet off a transmission or distribution line. The
2406 Service Saddle is recommended for use on C900
Pipe because of the wide strap configuration. Other
products also recommended are 2506, 2606, and
2706. See individual product sheets for more details.
2406 SS
2406 DS
MATERIAL SPECIFICATION:
Saddle Body: Cast Ductile Iron body (ASTM A536)
Gaskets:
SBR (Buna S) Rubber, (AWWA C111). Other compounds available.
Saddle Straps: T304 Stainless Steel, fully passivated*.
Fasteners:
1/2" NC T304 Stainless Steel.
Coating:
Two coats of Enamel.
OTHER CONFIGURATIONS: (See Product Information for each of the following)
2408: Enamel coated Cast Ductile Iron with Low Alloy Steel Straps.
2506: Epoxy coated Cast Ductile Iron body with T304 Stainless Steel straps.
HOW TO ORDER:
Determine the product number (2406, 2408, or 2506), the high limit of range (see page 2.2.2), outlet size, outlet
thread, and strap style, and then use the appropriate ordering code as shown in the following example.
If a Single strap (SS) Saddle with a 3/4" CC tap is required for a 6" Ductile Iron pipe (6.90" OD). Refer to page
2.2.2 and then use the appropriate ordering code as shown in the following example:
2406
7.50"
x
3/4"
CC SS
product
number
high limit
of range
outlet
size
outlet
thread
strap
style
Note:
"Passivated" refers to chemically treating Stainless Steel after welding to return it to its original high
corrosion resistance and appearance.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
2.2.1
ROBAR
2406 SS
2406 DS
Designed for tapping into Steel, Ductile Iron, Cast Iron and Asbestos Cement pipe. Saddle straps and bodies are
shaped to evenly and safely distribute the clamping load to the pipe. When tightened, they conform to the various
diameters in each nominal size of pipe within specified working range. Refer to the ROBAR OD Chart (see page
0.9.1) for various pipe diameters.
WORKING
RANGE
LOW HIGH*
OUTLET SIZES
AWWA (CC)
OR
IRON PIPE (IP)
STRAP STYLE
SINGLE
(SS)
2
3
2.38
3.25
2.56
3.54
3/4 - 1
3/4 - 1
4.50
5.40
3/4 - 2
SS
SS
SS
6.62
7.50
3/4 - 2
SS
9.62
3/4 - 2
SS
10.75 12.12
3/4 - 2
SS
3/4 - 2
SS
DOUBLE
(DS)
DS
DS
8.62
DS
10
DS
12
12.75 14.38
DS
APPROXIMATE
SHIPPING WEIGHT
(LBS.)
(KG.)
2.0
2.5
5.0
6.5
6.0
8.5
6.5
10.0
7.5
11.5
11.5
12.5
0.9
1.1
2.3
2.9
2.7
3.9
2.9
4.5
3.4
5.2
5.2
5.7
Note:
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
2.2.2
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
Effective: January 1, 2000
ROBAR
SIZES AVAILABLE:
2" to 12" Nominal Pipe OD.
Outlets from 3/4" to 2" in AWWA taper (CC) or
female Iron pipe (IP).
Available in Single strap (SS) and double strap
(DS) styles.
2 1/2" or 3" IP male outlets are available on
request. Style 2506 double strap only.
Fits steel (IPS), Cast Iron and Ductile Iron pipe.
Consult factory for other outlet sizes.
APPLICATIONS:
ROBAR 2506 Service Saddles are used to take a
service outlet off a transmission or distribution line. The
2506 Service Saddle is recommended for use on C900
Pipe because of the wide strap configuration. Other
products also recommended are 2406, 2606, and
2706. See individual product sheets for details.
2506 SS
2506 DS
MATERIAL SPECIFICATION:
Saddle Body: Cast Ductile Iron body (ASTM A536).
Gaskets:
SBR (Buna S) Rubber, (AWWA C111). Other compounds available.
Saddle Straps: T304 Stainless Steel, fully passivated*.
Fasteners:
1/2" NC T304 Stainless Steel.
Coating:
Corrosion Protective Epoxy coating (AWWA C213-79).
OTHER CONFIGURATIONS: (See Product Information for each of the following)
2408: Enamel coated Cast Ductile body with Low Alloy Steel Straps.
2406: Enamel coated Cast Ductile body with T304 Stainless Steel Straps.
HOW TO ORDER:
Determine the product number (2506, 2408 or 2406), the high limit of range, (see page 2.3.2), outlet size, outlet
thread, and strap style, and then use the appropriate ordering code as shown in the following example:
2506
product
number
7.50"
high limit
of range
3/4"
CC
outlet
size
outlet
thread
- SS
strap
style
Note:
"Passivated" refers to chemically treating Stainless Steel after welding to return it to its original high
corrosion resistance and appearance.
Alternative gasket materials are available. Refer to the Gasket Selection Chart and contact ROBAR
for pricing and delivery.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
2.3.1
ROBAR
2506 SS
2506 DS
Designed for tapping into Steel, Ductile Iron, Cast Iron and Asbestos Cement pipe. Saddle straps and bodies are
shaped to evenly and safely distribute the clamping load to the pipe. When tightened, they conform to the various
diameters in each nominal size of pipe within specified working range. Refer to the ROBAR OD Chart (see page
0.9.1) for various pipe diameters.
WORKING
RANGE
LOW HIGH*
OUTLET SIZES
AWWA (CC)
OR
IRON PIPE (IP)
SINGLE
(SS)
STRAP STYLE
DOUBLE
(DS)
APPROXIMATE
SHIPPING WEIGHT
(LBS.)
(KG.)
2
3
2.38
3.25
2.56
3.54
3/4 - 1
3/4 - 1
SS
SS
2.0
2.5
0.9
1.1
4.50
5.40
3/4 - 2
SS
5.0
2.3
6.5
2.9
7.50
3/4 - 2
SS
6.0
2.7
8.5
3.9
6.5
2.9
10.0
4.5
7.5
3.4
11.5
5.2
11.5
5.2
12.5
5.7
DS
6
6.62
DS
8
8.62
9.62
3/4 - 2
SS
DS
10
10.75 12.12
3/4 - 2
SS
3/4 - 2
SS
DS
12
12.75 14.38
DS
Note:
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
2.3.2
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
Effective: January 1, 2000
ROBAR
SERIES 2606
STANDARD SIZES:
2" to 24" Nominal Pipe OD with outlets available from
3/4" to 2" AWWA taper (CC) or female Iron Pipe (IP).
2616 (one section)
Single bolt closure (SB) on 2" through 8"
nominal pipe sizes.
Double bolt closures (DB) on 2" through 12"
nominal pipe sizes.
2626 (two sections)
Double (DB) bolt closures on 14" through 18"
nominal pipe sizes.
2636 (three sections)
Double (DB) bolt closures on 20" through 24"
nominal pipe sizes.
2616 SB
2626 DB
2636 DB
APPLICATIONS:
ROBAR 2606 Service Saddles are used to take a
service outlet off any transmission or distribution supply
line. Especially recommended for plastic pipe or where
corrosion is a factor.
MATERIAL SPECIFICATION:
Saddle Body: T304 Stainless Steel, fully passivated*.
Gasket:
SBR (Buna S) Rubber (AWWA C111)**.
Fasteners:
5/8" NC T304 Stainless Steel studs, rolled threads.
OPTIONS:
2 1/2" and 3" outlets are available on nominal sizes above 6".
Saddle body can be made wider if required.
HOW TO ORDER:
Determine the product number (2616, 2626, or 2636), the high limit of range, (see page 2.5.2, 2.5.3), outlet size,
outlet thread, and bolt style, and then use the appropriate ordering code as shown in the following examples.
2616
7.50"
x
3/4"
CC - SB
product
number
high limit
of range
outlet
outlet
thread
bolt
style
Note:
*
**
"Passivated" refers to chemically treating Stainless Steel after welding to return it to its original high
corrosion resistance and appearance.
Alternative gasket materials are available. Refer to the Gasket Selection Chart (see page 0.8.1) and
contact ROBAR for pricing and Delivery.
Please contact ROBAR with your special requirements to determine availability, price and delivery.
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
Effective: January 1, 2000
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
2.5.1
ROBAR
2616 SB
2616 DB
SERIES 2600
NOMINAL
PIPE
SIZE
WORKING
RANGE
PIPE
LOW
OD HIGH*
OUTLET SIZES
AWWA (CC)
OR
IRON PIPE (IP)
BOLT STYLE
SINGLE
(SB)
3/4 - 1**
SB
3/4 - 1
DOUBLE
(DB)
SADDLE
WIDTH
APPROXIMATE
SHIPPING WEIGHT
(LBS.)
(KG.)
4.8
1.5
0.7
SB
4.8
1.8
0.8
3/4 - 1
SB
4.8
2.0
0.9
3/4 - 1
3/4 - 1
SB
4.8
2.5
1.1
DB
6.0
3.3
1.5
DB
8.0
4.8
3.9
3.0
1.6
1.4
DB
6.0
3.8
1.7
DB
8.0
4.8
4.0
3.5
1.8
1.6
DB
6.0
4.8
2.2
DB
8.0
5.0
2.3
3/4 - 1
DB
6.0
5.8
2.5
1 1/4 - 2
DB
8.0
6.0
2.7
DB
6.0
6.8
3.0
DB
8.0
7.0
3.2
(Actual)
2 1/2
10
12
2.30
2.50
2.70
2.90
3.15
3.40
3.65
3.90
4.00
4.40
4.80
5.20
5.60
6.00
6.40
6.60
6.80
7.20
7.60
8.00
8.40
8.60
9.00
9.20
9.60
10.00
10.40
10.70
11.10
11.60
12.00
12.40
12.75
13.10
13.60
2.38
2.88
3.50
4.00
4.50
4.80
6.00
6.63
6.90
8.00
8.63
9.05
10.00
10.75
11.10
12.00
12.75
13.20
2.50
2.70
2.90
3.15
3.40
3.80
3.90
4.10
4.40
4.80
5.20
5.60
6.00
6.40
6.80
7.00
7.20
7.60
8.00
8.40
8.80
9.05
9.40
9.60
10.00
10.40
10.80
11.10
11.50
12.00
12.40
12.80
13.20
13.50
14.00
1 1/4 - 2
3/4 - 1
SB
3/4 - 1
1 1/4 - 2
3/4 - 1
3/4 - 1
SB
1 1/4 - 2
3/4 - 1
1 1/4 - 2
Note:
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
2.5.2
ROBAR
2626 SB
2626 DB
SERIES 2600
NOMINAL
PIPE
WORKING
RANGE
SIZE
10
12
14
16
18
OUTLET SIZES **
AWWA (CC)
SHIPPING WEIGHT
LBS. (Approx.)
LOW
PIPE
OD HIGH
(Actual)
*
3.50
4.25
3/4 - 1
4.8
6.0
2.0
3.45
4.45
4.74
4.50
4.80
5.25
5.54
3/4 - 1
4.8
3.0
5.35
5.90
6.40
6.85
7.05
7.95
8.40
6.00
6.63
6.90
8.00
8.63
6.15
6.70
7.20
7.65
7.85
8.75
9.20
9.00
9.05 9.80
9.30
10.10
10.00 10.00 10.80
10.70 10.75 11.50
11.05 11.10 11.85
11.40
12.20
12.00
12.70
13.10
13.40
13.70
14.00
14.95
15.75
15.60
16.40
17.20
17.60
18.00
18.40
18.80
19.20
12.00 12.80
12.75 13.50
13.20 13.90
14.20
14.50
14.00 14.80
15.30 15.75
16.55
16.00 16.40
17.20
17.40 18.00
18.40
18.00 18.80
19.20
19.60
19.50 20.00
OR
IRON PIPE (IP)
SADDL
E
WIDTH
SINGLE
BOLT
DOUBLE
BOLT
3.0
1
2
1
1
2
6.0
8.0
4.8
6.0
8.0
3.5
4.0
3.5
3/4 - 1
4.8
4.5
3/4 - 1
1 1/4 - 2
6.0
8.0
5.0
5.5
3/4 - 1
1 1/4 - 2
6.0
8.0
6.5
7.0
3/4 - 1
6.0
8.0
1 1/4 - 2
8.0
8.5
3/4 - 1
1 1/4 - 2
6.0
8.0
8.5
9.0
3/4 - 1
1 1/4 - 2
6.0
8.0
9.8
10.3
3/4 - 1
6.0
10.8
1 1/4 - 2
8.0
11.2
4.0
4.75
Note:
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
2.5.3
ROBAR
2636 DB
SERIES 2600
NOMINAL
PIPE
SIZE
WORKING
RANGE
PIPE
LOW OD HIGH*
OUTLET SIZES**
AWWA (CC)
OR
IRON PIPE (IP)
SADDLE
WIDTH
SHIPPING WEIGHT
LBS. (Approx.)
DOUBLE
BOLT
3/4 - 1
10.75
1 1/4 - 2
3/4 - 1
1 1/4 - 2
3/4 - 1
8
6
8
6
11.25
11.75
12.15
12.75
1 1/4 - 2
13.15
3/4 - 1
12.75
1 1/4 - 2
13.15
(Actual)
16
18
20
24
15.92
16.25
17.10
18.00
19.20
21.40
22.80
23.45
24.45
25.50
28.25
29.40
29.85
30.85
16.00 17.12
17.45
17.40 18.30
18.00 19.20
19.50 20.40
21.60 22.60
24.00
24.65
25.65
25.80 26.70
29.45
30.60
31.05
32.05
Note:
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
2.5.4
ROBAR
SIZES AVAILABLE:
4" to 24" Nominal Pipe OD.
Outlets from 3/4" to 2" in AWWA taper (CC) or
female Iron pipe (IP).
Fits Steel (IPS), Cast Iron and Ductile Iron size
pipe and AC/RB.
Consult factory for other outlet sizes.
Recommended for C900 pipe.
2706 SS
2706 DS
APPLICATIONS:
ROBAR 2706 Service Saddles are used to take a
service outlet off a transmission or distribution line.
Waterworks Bronze and passivated T304 Stainless
Steel are "noble" materials which are closely related to
each other near the top of the Galvanic Scale of
corrosion resistance. Unlike pairs of widely dissimilar
metals, they will both exhibit long life in most 'hot' soil
environments.
MATERIAL SPECIFICATION:
Saddle Body: Cast Bronze Waterworks (ASTM B62 and AWWA C-800).
Gaskets:
SBR (Buna S) Rubber (AWWA C111).
Saddle Straps: T304 Stainless Steel, rolled threads, fully passivated*.
Fasteners:
1/2" NC T304 Stainless Steel.
HOW TO ORDER:
Determine the product number (2706), the high limit of range, (see page 2.6.2, 2.6.3), outlet size, outlet thread,
and strap style, and order by using appropriate ordering code as shown in the following example:
If a Single strap (SS) Saddle with a 3/4" CC tap is required for a 6" Ductile Iron pipe (6.90" OD), the ordering code
is:
2706
7.60"
x
3/4"
CC - SS
product
number
high limit
of range
outlet
size
outlet
thread
strap
style
Note:
"Passivated" refers to chemically treating Stainless Steel after welding to return it to its original high
corrosion resistance and appearance.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
2.6.1
ROBAR
2706 SS
2706 DS
ROBAR 2706 Service Saddles are strong and resist corrosion. They fit pipes from Standard Steel size to Rough
Barrel Asbestos Cement size. Flexible straps adapt readily to the pipe, evenly distributing load and easing
installation.
WORKING
RANGE
LOW HIGH*
4.50
5.60
6.60
7.60
OUTLET SIZES
AWWA (CC)
OR
IRON PIPE (IP)
SINGLE
(SS)
3/4 - 1
1 1/4 - 2
3/4 - 1
1 1/4 - 2
SS
SS
SS
SS
STRAP STYLE
3/4 - 2
8
10
8.60
9.80
10.70 11.20
3/4 - 1
DOUBLE
(DS)
APPROXIMATE
SHIPPING WEIGHT
(LBS.)
DS
SS
(KG.)
2.0
3.5
2.8
3.3
0.9
1.6
1.3
1.5
6.3
2.9
3.3
1.5
3/4 - 2
DS
6.5
3.0
3/4 - 2
DS
7.3
3.3
3/4 - 2
DS
8.5
3.9
8.8
4.0
11.10 12.30
12
12.70 13.30
13.10 14.55
14
15.10 15.70
3/4 - 2
DS
8.8
4.0
3/4 - 2
DS
9.3
4.2
3/4 - 2
DS
11.4
5.1
3/4 - 2
DS
12.2
5.5
3/4 - 2
DS
13.4
6.1
15.20 16.85
16
18
20
24
17.20 18.40
17.40
18.60
19.50
19.70
21.00
20.70
21.70
22.40
23.10
24.60
26.48
27.85
19.20
20.40
21.30
21.50
22.80
22.50
23.50
24.20
24.90
26.40
27.15
29.65
Note:
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
2.6.2
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
Effective: January 1, 2000
ROBAR
SIZES AVAILABLE:
4" to 16" Nominal Pipe OD.
Outlets from 3/4" to 2" in AWWA taper (CC) or
female Iron Pipe (IP); (3/4 to 1 1/4 for 4
saddle).
Fits Steel (IPS), Cast Iron and Ductile Iron pipe.
APPLICATIONS:
ROBAR 2786 Isolating Saddles are used to electrically
isolate an outlet or service line from a main distribution
line. Primarily used in cathodically protected systems
or to separate dissimilar metals. Waterworks Bronze
and passivated T304 Stainless Steel are "noble"
materials which are closely related to each other near
the top of the Galvanic Scale of corrosion resistance.
Unlike pairs of widely dissimilar metals, they will both
exhibit long life in most 'hot' soil environments.
MATERIAL SPECIFICATION:
Saddle Body: Waterworks Bronze (ASTM B62 andAWWA C-800).
Gaskets (Body & Strap):
SBR (Buna S) Rubber Isolating compound,
(ASTM D2000-80 AA 615).
Strap & Armor: T304 Stainless Steel, fully passivated*.
Fasteners:
1/2" NC T304 Stainless Steel studs, rolled threads.
NOM.
PIPE
SIZE
WORKING
RANGE
LOW HIGH**
4
6
8
10
12
ELECTRICAL SPECIFICATIONS:
Conditions:
Laboratory, torque level 45 ft. lbs.
Resistance:
800 Mega ohms @ 10,000 volts DC.
Breakdown Voltage:
Minimum 12,000 volts DC.
4.50
6.60
8.60
10.70
12.70
13.80
15.20
17.20
14
16
5.30
7.40
9.40
11.50
13.50
14.40
16.00
18.00
APPROXIMATE
SHIPPING WT.
(LBS.)
(KG.)
6.7
7.2
7.5
8.0
9.2
10.2
10.5
11.0
2.3
3.2
3.4
3.6
4.2
4.6
4.8
5.0
high limit
of range
outlet
size
outlet
thread
*
**
"Passivated" refers to chemically treating Stainless Steel after welding to return it to its original high
corrosion resistance and appearance.
The high limit of the range is used in the ordering code.
The 2786 is designed to be installed with a maximum torque of 45 ft. lbs. This enables the saddle to
perform to its maximum electrical isolating capability.
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
Effective: January 1, 2000
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
2.8.0
SECTION 3 - CONTENTS
SEWER SADDLES
ROBAR
SEWER SADDLES
3606
Fabricated T304 SS
3.1.1
3626
3.1.2
3696
3.1.2
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
3.0.1
ROBAR
STANDARD SIZES:
6" to 18" Nominal Pipe OD on main line, 4" IPS inlet
line. Sizes other than those specified may be ordered
by contacting ROBAR for quotation.
APPLICATIONS:
ROBAR 3606 Sewer Saddles are used to make a 4"
inlet branch to a gravity main sewer line. Particularly
suited for High Density Polyethylene pipe. Strapping
material is not included with product.
MATERIAL SPECIFICATION:
Body:
T304 Stainless Steel (ASTM A743), fully passivated*.
Gaskets:
1/2" x 1/2" square section closed cell neoprene, (ASTM D2000).
Fasteners:
Not included.
OTHER CONFIGURATIONS:
3626: With two 1/2" NC T304 Stainless steel fasteners, (Outlet opposite closure) (see page 3.1.2).
3696: With two 1/2" NC T304 Stainless steel fasteners, (Outlet at 90 to closure) (see page 3.1.2).
HOW TO ORDER:
Determine the product number (3606, 3626, or 3696), the OD of sewer main and the actual OD of the branch,
then order by using the appropriate ordering code as shown in the following example.
If a 4" branch (4.50" OD) off of a 12" HDPE sewer main is required, the ordering code is:
3606
12.75"
x
4.50"
product
number
main OD
branch
OD
Note:
"Passivated" refers to chemically treating Stainless Steel after welding to return it to its original high
corrosion resistance and appearance.
Standard branch outlet is 4" nominal (4.63" OD) accepts 4.50" OD.
Special designs, lengths or diameters may be obtained from the factory on request.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
3.1.1
ROBAR
STANDARD SIZES:
6" to 18" Nominal Pipe OD on main line, 4" IPS inlet
line. Sizes other than those specified may be ordered
by contacting ROBAR for quotation.
APPLICATIONS:
ROBAR 3626 & 3696 Sewer Saddles are used to
make a 4" inlet branch to a main sewer line (4" - 4.50"
OD is standard). Particularly suited for High Density
Polyethylene pipe.
3626
3696
MATERIAL SPECIFICATION:
Body:
T304 Stainless Steel (ASTM A743), fully passivated*.
Gaskets:
1/2" x 1/2" square section closed cell Neoprene, (ASTM D200).
Fasteners:
1/2" NC T304 Stainless Steel Studs and washers.
OTHER CONFIGURATIONS:
3606: T304 Stainless Steel, passivated* for maximum corrosion resistance.
3696: Similar to 3626 but with outlet at 90 to closure.
HOW TO ORDER:
Determine the product number (3626 or 3696), OD of sewer main and branch, then order by using the appropriate
ordering code as shown in the following example.
If a 4" branch off a 12" High Density Polyethylene (HDPE) sewer main is required, the ordering code is:
3626
12.75"
x
4.50"
product
number
Main OD .
branch
OD
Note:
"Passivated" refers to chemically treating Stainless Steel after welding to return it to its original high
corrosion resistance and appearance.
Standard branch outlet is 4" nominal (4.50" OD).
Special designs, lengths or diameters may be obtained from the factory on request.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
3.1.2
SECTION 4 - CONTENTS
RESTRAINERS
ROBAR
RESTRAINERS
4400
4.1.1
4401
4.2.0
4499
4.9.1
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
4.0.1
4400 RESTRAINER
CAST DUCTILE IRON
PRODUCT INFORMATION
ROBAR
MATERIAL SPECIFICATION:
Body:
Cast Ductile Iron (ASTM A536).
Fasteners:
5/8 or 3/4" NC "Hex" bolts
(AWWA C111).
C
A
HOW TO ORDER:
Determine the product number (4400) and the nominal
pipe size and then order by using the appropriate
ordering code (see table below), as shown in the
following example.
For an 8" C900 PVC pipe (9.05" OD), the ordering code is:
4400
8"
product
number
nominal
pipe size
i.e. 4400 - 8
NOMINAL
PIPE
ORDERING
SIZE
CODE
4
4400-4
6
4400-6
8
4400-8
10
4400-10
12
4400-12
Note:
PVC PIPE
DUCTILE OD
4.80
6.90
9.05
11.10
13.20
A
1 1/8
1 1/8
1 1/4
1 5/8
1 5/8
B.C.
APPROXIMATE
B
C
CLAMPING BOLTS SHIPPING WEIGHT
DIA. MAX.
NO.
SIZE
(LBS.)
(KG.)
9 1/8
6
2
5/8 x 4
6.5
3.0
11 1/8
6
2
5/8 x 4
8.5
3.9
13 7/8
6
2
3/4 x 5
13.0
5.9
15 1/4
6
4
7/8 x 5
15.15
6.9
17 1/4
6
4
7/8 x 5
18.00
8.2
All dimensions are in inches
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
4.1.1
4401 RESTRAINER
CAST DUCTILE IRON
PRODUCT INFORMATION
ROBAR
MATERIAL SPECIFICATION:
Body:
Cast Ductile Iron (ASTM A536).
Fasteners:
5/8 or 3/4" NC "Hex" bolts (AWWA C111).
C
A
HOW TO ORDER:
Determine the product number (4401) and the nominal
pipe size and then order by using the appropriate
ordering code (see table below), as shown in the
following example.
For a 6" PVC pipe (6.63" OD), the ordering code is:
4401
product
number
B
6"
nominal
pipe size
i.e. 4401 - 6
NOMINAL
PIPE
ORDERING
SIZE
CODE
4
4401-4
6
4401-6
8
4401-8
10
4401-10
12
4401-12
Note:
PVC PIPE
IPS OD
4.50
6.625
8.625
10.75
12.75
1 1/8
1 1/8
1 1/4
1 5/8
1 5/8
9 1/8
11 1/8
13 7/8
15 1/4
17 1/4
APPROXIMATE
SHIPPING WEIGHT
(LBS.)
(KG.)
6.5
3.0
8.5
3.9
13.0
5.9
16.1
7.3
16.7
7.6
All dimensions are in inches
B.C.
C
CLAMPING BOLTS
MAX.
NO.
SIZE
6
2
5/8 x 4
6
2
5/8 x 4
6
2
3/4 x 5
6
4
7/8x 5
6
4
7/8 x 5
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
4.2.0
ROBAR
SIZES AVAILABLE:
One size.
APPLICATIONS:
ROBAR 4499 Restraint Lugs are designed for use on
Mechanical Joint Fittings to prevent pull-out.
MATERIAL SPECIFICATION:
Cast Ductile Iron (ASTM A536).
HOW TO ORDER:
Specify ROBAR Product Number (4499).
ROBAR
PRODUCT
NUMBER
4499
SDR 26 INSTALLATION
APPROXIMATE
SHIPPING WEIGHT
(LBS.)
(KG.)
0.85
0.39
C900 OR SDR 18
INSTALLATION
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
4.9.1
SECTION 5 - CONTENTS
REPAIR CLAMPS
ROBAR
REPAIR CLAMPS
All Stainless Repair Clamps
5.2.1
5616
Style 1
5.2.2
5626
Style 2
5.2.3
Style 3
5.2.4
5636
5696
5.6.1
5606
5.6.2
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
5.0.1
ROBAR
5616
APPLICATIONS:
ROBAR 5600 Series Repair Clamps are used to
effectively repair holes or breaks in water mains.
STANDARD SIZES:
3" to 24" Nominal pipe OD with standard lengths from
6" to 24".
STANDARD CONFIGURATIONS:
5616 1 Section (Style 1) sizes 3 -12" Page 5.2.2
5626 2 Sections (Style 2) sizes 3 -14" Page 5.2.3
5636 3 Sections (Style 3) sizes 10 -24" Page 5.2.4
5626
5636
Note:
"Passivated" refers to chemical treatment after welding to return Stainless Steel to its original high
corrosion resistance and appearance.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
5.2.1
ROBAR
NOMINAL
PIPE
SIZE
WORKING
RANGE
PIPE
LOW OD HIGH*
8"
12"
16"
24"
4.8 lbs
5.0 lbs
6.8 lbs
7.0 lbs
9.0 lbs
9.50 lbs
12.0 lbs
12.5 lbs
19.5 lbs
20.0 lbs
5.5 lbs
7.3 lbs
10.5 lbs
13.8 lbs
21.3 lbs
6.3 lbs
8.3 lbs
12.0 lbs
15.8 lbs
24.0 lbs
7.0 lbs
9.3 lbs
13.0 lbs
17.0 lbs
26.5 lbs
10.25 lbs
14.25 lbs
17.75 lbs
28.50 lbs
12.25 lbs
16.25 lbs
21.25 lbs
33.25 lbs
(Actual)
3
3.5
4
10
12
3.45
3.95
4.45
4.74
5.05
5.35
5.95
6.40
6.60
6.85
7.05
7.40
7.95
8.40
8.60
9.00
9.30
9.75
10.50
10.70
11.05
11.40
11.70
12.00
12.55
12.70
13.10
13.40
13.70
14.00
3.50
4.50
4.80
6.00
6.63
6.90
8.00
8.63
9.05
10.00
10.75
11.10
12.00
12.75
13.20
3.85
4.35
4.85
5.14
5.45
5.75
6.35
6.80
7.00
7.25
7.45
7.80
8.35
8.80
9.00
9.40
9.70
10.15
10.90
11.10
11.45
11.80
12.10
12.40
12.95
13.10
13.50
13.80
14.10
14.40
high limit
of range
clamp
width
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
5.2.2
ROBAR
NOMINAL
PIPE
SIZE
WORKING
RANGE
PIPE
LOW
OD HIGH*
12"
16"
24"
8.8 lbs
9.0 lbs
12.0 lbs
19.5 lbs
10.8 lbs
16.0 lbs
21.0 lbs
32.3 lbs
11.3 lbs
17.0 lbs
21.5 lbs
34.5 lbs
12.5 lbs
18.3 lbs
23.5 lbs
36.8 lbs
13.8 lbs
19.3 lbs
25.0 lbs
38.5 lbs
15.8 lbs
23.5 lbs
28.3 lbs
46.8 lbs
16.5 lbs
24.5 lbs
29.8 lbs
48.8 lbs
(Actual)
3
4
10
12
14
3.45
4.45
4.74
5.35
5.90
6.40
6.85
7.05
7.95
8.40
9.00
9.30
10.00
10.70
11.05
11.40
12.00
12.70
13.10
13.40
13.70
14.00
14.95
15.75
3.50
4.50
4.80
6.00
6.63
6.90
8.00
8.63
9.05
10.00
10.75
11.10
12.00
12.75
13.20
14.00
15.30
4.25
5.25
5.54
6.15
6.70
7.20
7.65
7.85
8.75
9.20
9.80
10.10
10.80
11.50
11.85
12.20
12.80
13.50
13.90
14.20
14.50
14.80
15.75
16.55
high limit
of range
clamp
width
Note:
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
5.2.3
ROBAR
NOMINAL
PIPE
SIZE
WORKING
RANGE
PIPE
LOW
OD HIGH
12"
16"
24"
17.0 lbs
18.5 lbs
28.5 lbs
31.0 lbs
38.5 lbs
40.5 lbs
60.0 lbs
62.5 lbs
20.0 lbs
33.0 lbs
43.0 lbs
65.5 lbs
22.5 lbs
34.0 lbs
45.50 lbs
67.50 lbs
23.0 lbs
34.5 lbs
46.0 lbs
69.0 lbs
24.0 lbs
37.0 lbs
48.00 lbs
72.0 lbs
28.0 lbs
41.0 lbs
52.0 lbs
84.0 lbs
(Actual)
10
12
14
16
18
20
24
11.00
13.10
13.65
14.85
15.92
17.10
16.25
18.00
19.20
21.40
22.80
23.45
24.45
25.50
28.25
29.40
29.85
30.85
11.10
13.20
14.00
15.30
16.00
17.40
18.00
19.50
21.60
24.00
25.80
12.20
14.30
14.85
16.05
17.12
18.30
17.45
19.20
20.40
22.60
24.00
24.65
25.65
26.70
29.45
30.60
31.05
32.05
high limit
of range
clamp
width
Note:
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
5.2.4
ROBAR
SERIES 301
STANDARD SIZES:
2" to 8" Nominal pipe OD with standard lengths from 4"
to 12".
APPLICATIONS:
ROBAR 5696 Single Section Repair Clamps are used to
repair small punctures, pinholes and splits which do not
require the full wrap-around gasket provided by the 5606
repair clamp.
NOMINAL
WORKING
PIPE
RANGE
SIZE
LOW HIGH*
MATERIAL SPECIFICATION:
Shell:
T304 Stainless Steel - fully passivated*.
Sidebar:
T304 Stainless Steel - fully passivated*.
Gasket:
SBR (Buna S) Rubber, (AWWA C111).
Fasteners:
1/2" NC T304 Stainless Steel.
1.90
2.00
2.25
2.37
2.87
2.15
2.25
2.50
2.62
3.12
1.0 lbs
1.8 lbs
2.0 lbs
3.12
3.37
1.3 lbs
2.0 lbs
2.5 lbs
3.8 lbs
3.50
3.75
4.12
4.37
1.5 lbs
2.5 lbs
3.0 lbs
4.5 lbs
4.50
4.75
6.12
6.37
2.0 lbs
3.3 lbs
4.0 lbs
6.0 lbs
6.63
6.88
8.63
8.88
3.8 lbs
5.0 lbs
7.5 lbs
4
6
8
2.5 lbs
HOW TO ORDER:
Determine the product number (5696), high limit of range (see table above) and length of clamp and then order
by using the appropriate ordering code as shown in the following example.
For a 12" long clamp on a pipe with an OD of between (6.63" - 6.88"), the ordering code is:
5696
product
number
6.88"
high limit
of range
12"
clamp
width
"Passivated" refers to chemically treating Stainless Steel after welding to return it to its original
high corrosion resistance and appearance.
Prices for special designs, lengths or diameters may be obtained from the factory on request.
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
Effective: January 1, 2000
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
5.6.1
ROBAR
SERIES 302
STANDARD SIZES:
2" to 8" Nominal pipe OD with standard lengths from 4"
to 12".
APPLICATIONS:
ROBAR 5606 Single Section Repair Clamps are used to
repair small holes or breaks in water mains.
MATERIAL SPECIFICATION:
Shell:
T304 Stainless Steel - fully passivated*.
Armor:
T304 Stainless Steel - fully passivated*.
Sidebar:
T304 Stainless Steel - fully passivated*.
Gasket:
SBR (Buna S) Rubber, (AWWA C111).
Fasteners:
1/2" NC T304 Stainless Steel.
NOMINAL
WORKING
PIPE
RANGE
SIZE
LOW HIGH*
HOW TO ORDER:
Determine the product number (5606), high limit of range
(see table right) and length of clamp and then order by
using appropriate ordering code as shown in the following
example.
For a 12" long clamp on a pipe with an OD of between
(6.85" - 7.10"), the ordering code is:
5606
7.10"
product
number
high limit
of range
2.12
2.25
2.37
2.63
2.87
3.25
3.50
3.74
4.45
2.37
2.50
2.62
2.88
3.12
3.50
3.75
3.99
4.70
4.75
5.00
6.58
6.83
6.85
7.10
8.58
8.83
9.00
9.25
1.0 lbs
1.8 lbs
2.0 lbs
3.1 lbs
1.5 lbs
2.5 lbs
3.0 lbs
4.5 lbs
1.8 lbs
3.0 lbs
4.5 lbs
5.3 lbs
2.5 lbs
3.8 lbs
5.0 lbs
7.5 lbs
2.8 lbs
4.5 lbs
5.5 lbs
8.3 lbs
12"
clamp
width
Note:
"Passivated" refers to chemically treating Stainless Steel after welding to return it to its original high
corrosion resistance and appearance.
Prices for special designs, lengths or diameters may be obtained from the factory on request.
B.C.
5.6.2
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
ROBAR
SERIES 302
STANDARD SIZES:
2" to 8" Nominal pipe OD with standard lengths from 4"
to 12".
APPLICATIONS:
ROBAR 5606 Single Section Repair Clamps are used to
repair small holes or breaks in water mains.
MATERIAL SPECIFICATION:
Shell:
T304 Stainless Steel - fully passivated*.
Armor:
T304 Stainless Steel - fully passivated*.
Sidebar:
T304 Stainless Steel - fully passivated*.
Gasket:
SBR (Buna S) Rubber, (AWWA C111).
Fasteners:
1/2" NC T304 Stainless Steel.
NOMINAL
WORKING
PIPE
RANGE
SIZE
LOW HIGH*
2.12
2.25
2.37
2.63
2.87
3.25
3.50
3.74
4.45
4.75
6.58
6.85
8.58
9.00
HOW TO ORDER:
Determine the product number (5606), high limit of range
(see table right) and length of clamp and then order by
using appropriate ordering code as shown in the following
example.
4
6
8
high limit
of range
2.37
2.50
2.62
2.88
3.12
3.50
3.75
3.99
4.70
5.00
6.83
7.10
8.83
9.25
1.0 lbs
1.8 lbs
2.0 lbs
3.1 lbs
1.5 lbs
2.5 lbs
3.0 lbs
4.5 lbs
1.8 lbs
3.0 lbs
4.5 lbs
5.3 lbs
2.5 lbs
3.8 lbs
5.0 lbs
7.5 lbs
2.8 lbs
4.5 lbs
5.5 lbs
8.3 lbs
12"
clamp
width
Note:
"Passivated" refers to chemically treating Stainless Steel after welding to return it to its original high
corrosion resistance and appearance.
Prices for special designs, lengths or diameters may be obtained from the factory on request.
B.C.
5.6.2
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
SECTION 6 - CONTENTS
TAPPING SLEEVES
ROBAR
TAPPING SLEEVES
6404
6.1.1
6506
6.1.1
6606
6.2.1
6626
6.3.1
6808
6.4.1
6906
6.4.1
6828
6.5.1
6926
6.5.1
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
6.0.1
ROBAR
SIZES AVAILABLE:
4" to 8" Nominal Pipe OD on main supply line.
4" to 8" Nominal Pipe OD on branch line.
APPLICATIONS:
ROBAR 6404 & 6506 Tapping Sleeves are used to make
a branch outlet off a main supply line. The outside
diameters of Ductile Iron and Cast Iron are within the
working range of this tapping sleeve.
MATERIAL SPECIFICATION:
Body:
Cast Ductile Iron (ASTM A536).
Flange:
Cast Ductile Iron (ASTM A536), 150 lb. Drilling.
Gasket:
NBR (Buna N) Rubber (ASTM D2000).
Fasteners:
6404: 3/4" NC Cast Ductile bolts, (ASTM A536).
6506: 3/4" NC T304 Stainless Steel.
Test Plug:
3/4" NPT Mild Steel.
Coatings:
6404: Two coats of Enamel.
6506: Corrosion Protective Epoxy coating, (AWWA C213-79).
HOW TO ORDER:
Determine the product number (6404 or 6506), nominal main size, nominal outlet size and actual main OD, and then
order by using the appropriate ordering code (see page 6.1.2) as shown in the following example.
If an Epoxy coated Tapping sleeve with Stainless Steel fasteners is required to install a 6" outlet on an 8" Ductile Iron
water pipe (9.05" OD), the ordering code is:
6506
8"
x
6"
9.05"
product
number
nom. main
size
nom.
outlet size
actual main
OD
Note:
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
6.1.1
ROBAR
NOMINAL
PIPE
SIZE
4x4
6x4
6x6
8x4
8x6
8x8
WORKING
RANGE
4.74 6.86 6.86 8.99 8.99 8.99 -
ORDERING
CODE*
APPROXIMATE
SHIPPING WEIGHT
(LBS.)
(KG.)
PN - 4" x 4" x OD
39
17.1
PN - 6" x 4" x OD
45
20.4
PN - 6" x 6" x OD
51
23.1
PN - 8" x 4" x OD
64
29.0
PN - 8" x 6" x OD
68
30.9
PN - 8" x 8" x OD
80
36.4
All dimensions are in inches
5.10
7.10
7.10
9.30
9.30
9.30
GASKET
MAIN
PIPE
OD
OUTLET
SIZE
4
6
4
4
6
4
6
8
Note:
A
SLEEVE
LENGTH
8
8 1/2
8 1/2
9 /12
9 /12
9 /12
B
FLANGE
HEIGHT
3 5/8
3 5/8
3 5/8
3 3/4
3 3/4
3 3/4
D
NUMBER
BOLT
BRANCH
OF
SIZE
ID
BOLTS
4 3/8
6
3/4
4 3/8
6
3/4
6 3/8
6
3/4
4 3/8
6
3/4
6 3/8
6
3/4
8 3/8
6
3/4
All dimensions are in inches
B.C.
C
SPIGOT
OD
5 1/32
5 1/32
7 1/32
5 1/32
7 1/32
9 1/32
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
6.1.2
ROBAR
MATERIAL SPECIFICATION:
Shell:
T304 Stainless Steel, fully passivated*.
Fasteners:
5/8" NC T304 Stainless Steel.
Gaskets:
Ringseal:
NBR (Buna N) Rubber, (AWWA C111).
Liner:
SBR (Buna S) Rubber, (AWWA C111).
Test Plug:
3/4" NPT Stainless Steel (WWP 460B).
Flange:
ASTM A743-70 Grade CF-8 (T304), fully passivated*, 150 lb. Drilling
Outlet Pipe:
T304 Stainless Steel, fully passivated*.
HOW TO ORDER:
Determine the product number (6606), nominal main size, nominal outlet size, high limit number (see page 6.2.2,
6.2.3), and then order using the appropriate ordering code as shown in the following example.
If a Stainless Steel Tapping Sleeve, with a 6" nominal outlet is required for a 12" nominal diameter Ductile Iron
pipe (13.20" OD), the ordering code is:
6606
12"
x
6"
13.40"
product
number
nom. main
size
nom. outlet
size
high end
of range
Note:
"Passivated" refers to chemically treating Stainless Steel after welding to return it to its original high
corrosion resistance and appearance.
Designed for use with undersized cutters only.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
6.2.1
ROBAR
STANDARD SIZES
NOMINAL BY
PIPE
X
SIZE
4
OUTLET
SIZE
3
4
3
3
4
6
10
12
14
16
3
4
6
8
10**
3
4
6
8
10
12**
3
4
6
8
10
12
3
4
6
8
10
12
WORKING
RANGE
LOW HIGH*
4.70
4.95
6.40
6.80
7.20
4.95
5.20
6.80
7.20
7.60
6.75
7.00
7.25
8.40
8.80
9.20
8.95
9.25
10.55
10.90
11.30
11.90
7.00
7.25
7.50
8.80
9.20
9.60
9.20
9.50
10.95
11.30
11.70
12.30
12.15
12.55
13.00
13.40
13.80
12.55
12.95
13.40
13.80
14.20
15.10
15.50
15.80
16.20
15.50
15.90
16.20
16.80
17.20
17.40
17.80
18.40
18.80
17.60
17.80
18.20
18.80
19.20
APPROXIMATE
SHIPPING WEIGHT
(LBS.)
(KG.)
FITTING
LENGTH
NUMBER
OF BOLTS
12
12
8
8
33
36
15.0
16.4
12
36
16.4
12
39
17.7
16
10
43
19.6
12
12
16
8
8
10
40
43
47
18.2
19.6
21.4
20
14
64
29.1
12
12
16
20
20
12
12
16
20
20
24
12
12
16
20
20
24
12
12
16
20
20
24
8
8
10
14
12
8
8
10
14
14
16
8
8
10
12
14
16
8
8
10
14
14
16
43
46
50
68
73
46
49
53
72
77
111
67
70
74
93
98
132
71
75
79
100
105
141
19.6
20.9
22.7
30.9
33.2
20.9
22.3
24.1
32.7
35.0
50.5
30.5
31.8
33.6
42.3
44.6
60.0
32.3
34.1
35.9
45.5
47.7
64.1
Continued...
Note:
*
**
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
6.2.2
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
Effective: January 1, 2000
ROBAR
STANDARD SIZES
NOMINAL BY
PIPE
X
SIZE
18
20
24
OUTLET
SIZE
3
4
6
8
10
12
3
4
6
8
10
12
3
4
6
8
10
12
WORKING
RANGE
LOW HIGH*
19.30
19.80
20.20
19.70
20.20
20.60
21.40
22.00
22.60
21.80
22.40
23.00
23.20
23.80
25.60
23.60
24.20
26.00
FITTING
LENGTH
NUMBER
OF BOLTS
12
12
16
20
20
24
12
12
16
20
20
24
12
12
16
20
20
24
12
12
15
21
21
24
12
12
15
21
21
24
12
12
15
21
21
24
APPROXIMATE
SHIPPING WEIGHT
(LBS.)
(KG.)
74
77
81
103
108
144
84
87
91
115
120
158
90
93
97
121
127
167
33.6
35.0
36.8
46.8
49.1
65.5
38.2
39.6
41.4
52.3
54.6
71.8
40.9
42.3
44.1
55.0
57.7
75.9
HOW TO ORDER:
Determine the product number (6606), nominal main size, nominal outlet size, high limit number (see page 6.2.2,
6.2.3), and then order using the appropriate ordering code as shown in the following example.
If a Stainless Steel Tapping Sleeve, with a 6" nominal outlet is required for a 12" nominal diameter Ductile Iron pipe
(13.20" OD), the ordering code is:
6606
12"
x
6"
13.40"
product
number
nom. main
size
nom. outlet
size
high end
of range
Note:
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
Effective: January 1, 2000
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
6.2.3
ROBAR
GASKET
GASKET
MAIN
PIPE
OD
12
16
20
20
24
4
4 1/2
5
5 1/2
5 3/4
B.C.
Phone:
Fax:
E-mail:
C
(DIA.)
5 1/32
7 1/32
9 1/32
11 1/32
13 1/32
D
BOLT
BOLT
(DIA.)
QTY.
SIZE
4 1/2
8
5/8
6 1/2
10
5/8
8 1/2
14
5/8
10 7/16
14
5/8
12 7/16
16
5/8
All dimensions are in inches
QUEBEC Phone:
Fax:
6.2.4
ROBAR
SIZES AVAILABLE:
4" to 24" Nominal Pipe OD on main supply line.
For other sizes contact ROBAR.
2" to 12" Nominal Pipe OD on branch line.
APPLICATIONS:
ROBAR 6626 Outlet Sleeves are used for "DRY TAP"
applications.
Outlet options are 3" through 16"
including size on size for 6" and 8". Particularly suited
for use on high density polyethylene.
MATERIAL SPECIFICATION:
Shell:
T304 Stainless Steel fully passivated*.
Fasteners:
5/8" NC T304 Stainless Steel, rolled threads.
Gaskets:
Ringseal:
NBR (Buna N) Rubber (AWWA C111).
Liner:
SBR (Buna S) Rubber (AWWA C111).
Flange:
4" - 6" T304 Stainless Steel, 150 lb. Drilling.
8" - 12" ASTM A-7 Mild Steel Plate with Corrosion Protective Epoxy coating, 150 lb. Drilling
(Option: T304 Stainless Steel).
Outlet:
T304 Stainless Steel fully passivated*.
HOW TO ORDER:
Determine the product number (6626), nominal main size, nominal outlet size and the high limit number (see page
6.3.2, 6.3.3) and then order by using the appropriate ordering code as shown in the following example.
If a Stainless Steel Outlet Sleeve, with a 6" nominal outlet is required for a 12" nominal diameter HDPE pipe
(12.75" OD), the ordering code is:
6626
12"
x
6"
12.95"
product
number
nom. main
size
nom. outlet
size
high end
of range
Note:
"Passivated" refers to chemically treating Stainless Steel after welding to return it to its original high
corrosion resistance and appearance.
Designed for use with undersized cutters only.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
6.3.1
ROBAR
STANDARD SIZES
NOMINAL BY
PIPE
X
SIZE
4
OUTLET
SIZE
WORKING
RANGE
LOW HIGH*
4.95
5.20
12
33
15.0
12
36
16.4
6.40
6.80
7.20
6.80
7.20
7.60
12
36
16.4
12
39
17.7
7.00
7.25
8.40
8.80
9.20
8.95
9.25
10.55
10.90
11.30
11.90
7.25
7.50
8.80
9.20
9.60
9.20
9.50
10.95
11.30
11.70
12.30
16
10
43
19.6
12
12
16
8
8
10
40
43
47
18.2
19.6
21.4
20
14
64
29.1
12.15
12.55
13.00
13.40
13.80
12.55
12.95
13.40
13.80
14.20
15.10
15.50
15.80
16.20
15.50
15.90
16.20
16.80
17.20
17.40
17.80
18.40
18.80
17.60
17.80
18.20
18.80
19.20
12
12
16
20
20
12
12
16
20
20
24
12
12
16
20
20
24
12
12
16
20
20
24
8
8
10
14
14
8
8
10
14
14
16
8
8
10
14
14
16
8
8
10
14
14
16
43
46
50
68
73
46
49
53
72
77
111
67
70
74
93
98
132
71
75
79
100
105
141
19.6
20.9
22.7
30.9
33.2
20.9
22.3
24.1
32.7
35.0
50.5
30.5
31.8
33.6
42.3
44.6
60.0
32.3
34.1
35.9
45.5
47.7
64.1
6x6
3
4
6
8x8
12
14
16
APPROXIMATE
SHIPPING WEIGHT
(LBS.)
(KG.)
4.70
4.95
NUMBER
OF BOLTS
3
4
10
FITTING
LENGTH
3
4
6
8
10**
3
4
6
8
10
12**
3
4
6
8
10
12
3
4
6
8
10
12
Continued . . .
Note:
*
**
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
6.3.2
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
Effective: January 1, 2000
ROBAR
STANDARD SIZES
NOMINAL BY
PIPE
X
SIZE
18
20
24
OUTLET
SIZE
WORKING
RANGE
LOW
FITTING
LENGTH
NUMBER
OF BOLTS
APPROXIMATE
SHIPPING WEIGHT
HIGH
(LBS.)
(KG.)
19.30 19.70
12
12
74
33.6
19.80 20.20
12
12
77
35.0
20.20 20.60
16
15
81
36.8
20
21
103
46.8
10
20
21
108
49.1
12
24
24
144
65.5
21.40 21.80
12
12
84
38.2
22.00 22.40
12
12
87
39.6
22.60 23.00
16
15
91
41.4
20
21
115
52.3
10
20
21
120
54.6
12
24
24
158
71.8
23.20 23.60
12
12
90
40.9
23.80 24.20
12
12
93
42.3
25.60 26.00
16
15
97
44.1
20
21
121
55.0
10
20
21
127
57.7
12
24
24
167
75.9
HOW TO ORDER:
Determine the product number (6626), nominal main size, nominal outlet size and the high limit number
(see page 6.3.2, 6.3.3) and then order by using the appropriate ordering code as shown in the following example.
If a Stainless Steel Outlet Sleeve, with a 6" nominal outlet is required for a 12" nominal diameter HDPE pipe (12.75"
OD), the ordering code is:
6626
12"
x
6"
12.95"
product
number
nom. main
size
nom. outlet
size
high end
of range
Note:
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
Effective: January 1, 2000
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
6.3.3
ROBAR
C
D
VSF
BACKING FLANGE
150# EPOXY COATED
B
GASKET
GASKET
MAIN
PIPE
OD
12
12
16
20
20
24
28
32
36
40
4.00
4.00
4.50
5.00
5.50
5.75
7.13
7.75
8.25
8.50
B.C.
Phone:
Fax:
E-mail:
C
(DIA.)
3.25
4.25
6.25
8.25
10.25
12.25
14.25
16.25
18.25
20.25
D
BOLT
BOLT
(DIA.)
QTY.
SIZE
3.00
5/8
4.00
8
5/8
6.00
10
5/8
8.00
14
5/8
10.00
14
5/8
12.00
16
5/8
14.00
18
5/8
16.00
20
5/8
18.00
24
5/8
20.00
28
5/8
All dimensions are in inches
QUEBEC Phone:
Fax:
6.3.4
ROBAR
SIZES AVAILABLE:
8" to 24" Nominal Pipe OD on main supply line.
4" to 12" Nominal Pipe OD on branch line.
Sizes not listed may be ordered by contacting
ROBAR.
APPLICATIONS:
ROBAR 6808 and 6906 Tapping Sleeves are used to
make a branch outlet off a main supply line on Steel,
Ductile Iron, Cast Iron and Asbestos Cement pipe.
MATERIAL SPECIFICATION:
Body:
Shell: Mild Steel 3/8" Plate (ASTM A36).
Outlet Pipe: Schedule 40 Mild Steel (ASTM A53) or equivalent.
Flange:
Forged Steel, drilled and faced per ASA 150 lb. standards. Flat face recessed for tapping valve, per
MSS standard SP-60. Options available.
Fasteners:
6808: 3/4" NC HSLA, (AWWA C111).
6906: T304 Stainless Steel, 3/4" N.C.
Gasket:
NBR (Buna N) Rubber, (AWWA C111).
Test Plug:
Mild Steel 3/4" NPT.
Coatings:
6808: Enamel coated.
6906: Corrosion Protective Epoxy coating (AWWA 213-79) .
CONFIGURATIONS:
6808: Enamel coated with Mild Steel fasteners.
6806: Enamel coated with T304 Stainless Steel fasteners.
6906: Epoxy coated with T304 Stainless Steel fasteners.
HOW TO ORDER:
Determine the product number (6808 or 6906), nominal main size, nominal outlet size and the high limit number (see
page 6.4.3) and then order using the appropriate ordering code as shown in the following example.
If an Enamel coated mild steel tapping sleeve is required to install a 12" outlet on a 16" Ductile Iron pipe (17.40" OD),
the ordering code is:
6808
16"
x
12"
17.85"
product
number
nom. main
size
nom. outlet
size
actual main
OD
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
Effective: January 1, 2000
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
6.4.1
ROBAR
5/16"
GASKET
GASKET
MAIN
PIPE
OD
OVERALL DIMENSION
PIPE O.D. + 6"
12
12
16
10
12
5.19
C
(DIA)
5.06
D
(DIA.)
4.0
BOLT
QTY
6
BOLT
SIZE
3/4
5.63
7.06
6.0
3/4
6.00
9.06
8.0
3/4
20
6.50
11.06
10.0
10
3/4
20
6.75
13.06
12.0
10
3/4
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
6.4.2
ROBAR
NOMINAL
PIPE
SIZE
BY
X
8**
10**
12**
*
**
***
14
16
18
20 - 22
24
Note:
OUTLET
SIZE
WORKING
RANGE
LOW HIGH*
APPROXIMATE
SHIPPING WEIGHT
(LBS.)
(KG.)
4
6
8
8.50
8.90
9.30
8.90
9.30
9.70
65
80
90
29
36
41
4
6
8
10***
9.70
10.10
10.50
10.90
11.30
11.70
12.10
12.50
12.90
13.30
10.10
10.50
10.90
11.30
11.70
12.10
12.50
12.90
13 30
13.60
13.60
14.05
14.50
14.95
15.30
15.75
16.15
16.60
17.05
17.40
17.85
18.30
18.75
19.20
19.50
19.90
20.40
20.90
21.40
21.90
22.15
22.70
23.60
24.15
24.70
25.25
25.80
14.05
14.50
14.95
15.40
15.75
16.15
16.60
17.05
17.50
17.85
18.30
18.75
19.20
19.65
19.95
20.40
20.90
21.40
21.90
22.15
22.70
23.25
24.15
24.70
25.25
25.80
26.35
68
70
92
118
118
118
92
114
140
190
215
215
102
124
150
200
225
114
136
162
212
132
154
180
230
255
137
159
185
235
260
260
260
167
189
215
265
290
31
32
42
54
54
54
42
52
64
86
98
46
56
68
91
102
52
62
74
96
108
60
70
82
105
116
62
72
84
107
118
118
118
76
86
98
120
132
4
6
8
10
12***
4
6
8
10
12
4
6
8
10
12
4
6
8
10
12
4
6
8
10
12
4
6
8
10
12
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
Effective: January 1, 2000
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
6.4.3
ROBAR
ROBAR
SERIES 428
BAKER
SIZES AVAILABLE:
4" to 30" Nominal Pipe OD on main supply line 4" to 12"
Nominal OD on branch line. Sizes not listed may be
ordered by contacting ROBAR.
APPLICATIONS:
6828 and 6926 Tapping Sleeves are used to make a
branch outlet off a main supply line on Steel, Ductile
Iron, Cast Iron and Asbestos Cement pipe.
16"
nom. main
size
8"
nom. outlet
size
18.72"
actual main
OD
Note:
Flange outlets 14" and larger are designed to fit specific tapping valves of various manufacturers.
Specify valve manufacturer when ordering branches 14" and larger.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
6.5.1
ROBAR
ROBAR
BAKER
5/16"
GASKET
GASKET
MAIN
PIPE
OD
OVERALL DIMENSION
PIPE O.D. + 6"
Note:
12
12
16
20
20
24
28
32
36
5.25
5.63
6.00
6.50
6.75
7.13
7.75
8.25
8.50
D
(DIA.)
4.50
6.50
8.50
10.44
12.44
BOLT
BOLT
QTY.
SIZE
6
3/4
6
3/4
8
3/4
10
3/4
10
3/4
12
3/4
See Note
14
3/4
16
3/4
18
3/4
All dimensions are in inches
Flange outlets 14" and larger are designed to fit specific tapping valves of the various manufacturers.
Specify valve manufacturer when ordering branches of 14" or larger.
B.C.
C
(DIA.)
5.03
7.03
9.03
11.03
13.03
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
6.5.2
ROBAR
ROBAR
BAKER
MAIN X
OUTLET
(NOM.)
6x4
8x4
8x6
10 x 4
10 x 6
10 x 8
12 x 4
12 x 6
12 x 8
12 x 10
14 x 4
14 x 6
14 x 8
14 x 10
14 x 12
16 x 4
16 x 6
16 x 8
16 x 10
16 x 12
18 x 4
18 x 6
18 x 8
18 x 10
18 x 12
20 x 4
20 x 6
20 x 8
20 x 10
20 x 12
24 x 4
24 x 6
24 x 8
24 x 10
24 x 12
30 x 4
30 x 4
30 x 4
30 x 6
30 x 6
30 x 6
PRICING
RANGE*
6.83 8.98 8.98 11.03 11.03 11.03 13.13 13.13 13.13 13.13 15.23 15.23 15.23 15.23 15.23 17.33 17.33 17.33 17.33 17.33 19.41 19.41 19.41 19.41 19.41 21.51 21.51 21.51 21.51 21.51 25.71 25.71 25.71 25.71 25.71 29.78 30.48 31.52 29.78 30.48 34.52 -
7.72
10.09
10.09
12.35
12.35
12.35
14.58
14.58
14.58
14.58
17.26
17.26
17.26
17.26
17.26
19.45
19.45
19.45
19.45
19.45
22.81
22.81
22.81
22.81
22.81
22.52
25.52
25.52
25.52
25.52
30.48
30.48
30.48
30.48
30.48
30.48
31.18
32.22
30.48
31.18
32.22
ORDERING CODE
FOR ENAMEL COAT
& ALLOY BOLTS
6828 - 4 - OD
6828 - 4 - OD
6828 - 6 - OD
6828 - 4 - OD
6828 - 6 - OD
6828 - 8 - OD
6828 - 4 - OD
6828 - 6 - OD
6828 - 8 - OD
6828 - 10 - OD
6828 - 4 - OD
6828 - 6 - OD
6828 - 8 - OD
6828 - 10 - OD
6828 - 12 - OD
6828 - 4 - OD
6828 - 6 - OD
6828 - 8 - OD
6828 - 10 - OD
6828 - 12 - OD
6828 - 4 - OD
6828 - 6 - OD
6828 - 8 - OD
6828 - 10 - OD
6828 - 12 - OD
6828 - 4 - OD
6828 - 6 - OD
6828 - 8 - OD
6828 - 10 - OD
6828 - 12 - OD
6828 - 4 - OD
6828 - 6 - OD
6828 - 8 - OD
6828 - 10 - OD
6828 - 12 - OD
6828 - 4 - 30.00
6828 - 6 - 30.75
6828 - 8 - 32.00
6828 - 4 - 30.00
6828 - 6 - 30.75
6828 - 8 - 32.00
ORDERING CODE
APPROXIMATE
FOR EPOXY COAT
SHIPPING WEIGHT
& SS BOLTS
(LBS.)
(KG.)
6926 - 4 - OD
71
32.3
6926 - 4 - OD
78
35.5
6926 - 6 - OD
87
39.5
6926 - 4 - OD
85
38.6
6926 - 6 - OD
94
42.7
6926 - 8 - OD
131
59.5
6926 - 4 - OD
94
42.7
6926 - 6 - OD
103
46.8
6926 - 8 - OD
144
65.5
6926 - 10 - OD
192
87.3
6926 - 4 - OD
100
45.5
6926 - 6 - OD
111
50.5
6926 - 8 - OD
153
69.5
6926 - 10 - OD
204
92.7
6926 - 12 - OD
229
104.1
6926 - 4 - OD
107
48.6
6926 - 6 - OD
117
53.2
6926 - 8 - OD
162
73.6
6926 - 10 - OD
216
98.2
6926 - 12 - OD
240
109.1
6926 - 4 - OD
120
54.5
6926 - 6 - OD
130
59.1
6926 - 8 - OD
180
81.8
6926 - 10 - OD
327
148.6
6926 - 12 - OD
262
119.1
6926 - 4 - OD
133
60.5
6926 - 6 - OD
144
65.5
6926 - 8 - OD
197
89.5
6926 - 10 - OD
258
117.3
6926 - 12 - OD
284
129.1
6926 - 4 - OD
149
67.7
6926 - 6 - OD
157
71.4
6926 - 8 - OD
219
99.5
6926 - 10 - OD
286
130.0
6926 - 12 - OD
304
138.2
6926 - 4 - 30.00
156
70.9
6926 - 4 - 30.75
156
70.9
6926 - 4 - 32.00
156
70.9
6926 - 6 - 30.00
160
72.7
6926 - 6 - 30.75
160
72.7
6926 - 6 - 32.00
160
72.7
All dimensions are in inches
Continued . . .
Note:
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
6.5.3
ROBAR
ROBAR
BAKER
MAIN X
OUTLET
(NOM)
30 x 8
30 x 8
30 x 8
30 x 10
30 x 10
30 x 10
30 x 12
30 x 12
30 x 12
PRICING
RANGE*
29.78 30.48 31.52 29.78 30.48 31.52 29.78 30.48 31.52 -
30.48
31.18
32.22
30.48
31.18
32.22
30.48
31.18
32.22
ORDERING CODE
FOR ENAMEL COAT
& ALLOY BOLTS
6828 - 8 - 30.00
6828 - 8 - 30.75
6828 - 8 - 32.00
6828 - 10 - 30.00
6828 - 10 - 30.75
6828 - 10 - 32.00
6828 - 12 - 30.00
6828 - 12 - 30.75
6828 - 12 - 32.00
ORDERING CODE
FOR EPOXY COAT
& SS BOLTS
6926 - 8 - 30.00
6926 - 8 - 30.75
6926 - 8 - 32.00
6926 - 10 - 30.00
6926 - 10 - 30.75
6926 - 10 - 32.00
6926 - 12 - 30.00
6926 - 12 - 30.75
6926 - 12 - 32.00
APPROXIMATE
SHIPPING WEIGHT
(LBS.)
(KG.)
219
99.5
219
99.5
219
99.5
292
132.7
292
132.7
292
132.7
315
143.2
315
143.2
315
143.2
Note:
4.40 4.74 5.10 6.57 6.83 7.20 7.40 8.36 8.73 8.98 9.27 9.68 10.45 11.03 11.36 11.76 12.42 13.13 13.60 13.60 -
4.60
5.10
5.30
6.73
7.16
7.60
7.73
8.75
9.12
9.37
9.69
9.68
10.45
11.03
11.36
11.76
12.42
13.13
13.60
13.60
6828 - 4 - 4.50
6828 - 4 - 4.80
6828 - 4 - 5.25
6828 - 6 - 6.63
6828 - 6 - 6.90
6828 - 6 - 7.20
6828 - 6 - 7.45
6828 - 8 - 8.63
6828 - 8 - 8.80
6828 - 8 - 9.05
6828 - 8 - 9.40
6828 - 8 - 10.00
6828 - 10 - 10.75
6828 - 10 - 11.10
6828 - 10 - 11.40
6828 - 10 - 12.00
6828 - 12 - 12.75
6828 - 12 - 13.20
6828 - 12 - 13.82
6828 - 12 - 13.82
B.C.
6926 - 4 - 4.50
65
29.5
6926 - 4 - 4.80
65
29.5
6926 - 4 - 5.25
65
29.5
6926 - 6 - 6.63
76
34.5
6926 - 6 - 6.90
76
34.5
6926 - 6 - 7.20
76
34.5
6926 - 6 - 7.45
76
41.2
6926 - 8 - 8.63
92
41.2
6926 - 8 - 8.80
92
41.2
6926 - 8 - 9.05
92
41.2
6926 - 8 - 9.40
92
41.2
6926 - 8 - 10.00
92
41.2
6926 - 10 - 10.75
138
62.7
6926 - 10 - 11.10
138
62.7
6926 - 10 - 11.40
138
62.7
6926 - 10 - 12.00
192
62.7
6926 - 12 - 12.75
201
91.4
6926 - 12 - 13.20
201
91.4
6926 - 12 - 13.82
201
91.4
6926 - 12 - 13.82
201
91.4
All dimensions are in inches
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
6.5.4
SECTION 7 - CONTENTS
FLANGED COUPLING ADAPTERS
ROBAR
7.1.1
7506
7.1.3
7808
7.2.1
7906
7.2.3
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
Effective: January 1, 2000
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
7.0.1
ROBAR
SIZES AVAILABLE:
4" to 12" Nominal Pipe OD. For additional sizes see
ROBAR 7808 Fabricated Steel Flanged Coupling
Adapter (7.2.2) Product Information Sheet.
APPLICATIONS:
ROBAR 7404 Flanged Coupling Adapters are used to
flexibly adapt plain end pipe to flanged end.
MATERIAL SPECIFICATION:
Flanged Body:
Cast Ductile Iron (ASTM A536), AWWA Class "D", C-207, with ANSI 150 lbs. drilling.
End Ring:
Cast Ductile Iron (ASTM A536).
Gaskets:
Flange:
NBR (Buna N) Rubber, (AWWA C111).
Coupling:
SBR (Buna S) Rubber, (AWWA C111).
Other compounds available. Contact ROBAR for price and delivery.
Fasteners:
Cast Ductile Iron (ASTM A536), or Low Alloy Steel (AWWA C111), 5/8" NC.
Coating:
Two coats of Enamel.
Anchor Pins:
(as required) HSLA Steel Anchor Pins (AP) for pipe sizes up to 12" (T304 Stainless Steel
available).
OTHER CONFIGURATIONS:
7406:
Enamel coated Body and End Ring, Stainless Steel fasteners.
7506:
Epoxy coated Body and End Ring, Stainless Steel fasteners.
7519:
Epoxy coated Body, End Ring and bolts - cathodically fitted.
HOW TO ORDER:
Determine the product number (7404, etc.), nominal pipe OD, the high limit of range (see page 7.1.2) and whether
Anchor Pins (AP) are required, and then use the appropriate ordering code as shown in the following example.
For a standard FCA required for 6" C900 PVC pipe (6.90" OD), the ordering code is:
7404
6"
7.10"
product
number
nom.
OD
high limit
of range
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
Effective: January 1, 2000
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
7.1.1
ROBAR
NOMINAL
PIPE
SIZE
WORKING
RANGE
PIPE
LOW
OD HIGH*
APPROXIMATE
SHIPPING WEIGHT
(LBS.)
(KG.)
(Actual)
10
12
Note:
3.45
3.50 3.95
3.75
4.05
4.05
4.35
4.40
4.60
19
8.6
4.74
4.80 5.10
5.10
5.30
5.85
6.00 6.15
6.15
6.45
6.50
6.70
30
13.6
6.86
6.90 7.10
7.15
7.35
7.90
8.00 8.25
8.25
8.55
8.55
8.75
38
17.2
8.99
9.05 9.30
9.30
9.50
10.20
10.50
10.60
10.90
11.10 11.10 11.40
56
25.4
11.55
11.75
11.90
12.10
12.60
12.90
13.20 13.20 13.50
72
32.6
13.80
14.10
14.10
14.35
All dimensions are in inches
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
7.1.2
ROBAR
SIZES AVAILABLE:
4" to 12" Nominal Pipe OD. For additional sizes see
ROBAR 7906 Fabricated Steel Flanged Coupling
Adapter (7.2.2.A) Product Information Sheet.
APPLICATIONS:
ROBAR 7506 Flanged Coupling Adapters are used to
flexibly adapt plain end pipe to flanged end. Used in
areas where corrosion is a factor. The 7506 body is
Epoxy Coated and Stainless Steel fasteners are
supplied.
MATERIAL SPECIFICATION:
Flanged Body:
Cast Ductile Iron (ASTM A536), AWWA Class "D", C-207, with ANSI 150 lbs. drilling.
End Ring:
Cast Ductile Iron (ASTM A536).
Gaskets:
Flange:
NBR (Buna N) Rubber, (AWWA C111).
Coupling:
SBR (Buna S) Rubber, (AWWA C111).
Other compounds available. Contact ROBAR for price and delivery.
Fasteners:
5/8 NC T304 Stainless Steel (ASTM A743).
Coating:
Corrosion Protective Epoxy Coating (AWWA C213-79).
Anchor Pins:
(as required) HSLA Steel Anchor Pins (AP) for pipe sizes up to 12" (T304 Stainless Steel
available).
OTHER CONFIGURATIONS:
7406:
Enamel coated Body and End Ring, Stainless Steel fasteners.
7506:
Epoxy coated Body and End Ring, Stainless Steel fasteners.
7519:
Epoxy coated Body, End Ring and bolts - cathodically fitted.
HOW TO ORDER:
Determine the product number (7506, etc.), nominal pipe OD, the high limit of range (see page 7.1.2) and whether
Anchor Pins (AP) are required, and then use the appropriate ordering code as shown in the following example.
For a standard FCA required for 6" C900 PVC pipe (6.90" OD), the ordering code is:
7506
6"
7.10"
product
number
nom.
OD
high limit
of range
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
Effective: January 1, 2000
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
7.1.3
ROBAR
NOMINAL
PIPE
SIZE
WORKING
RANGE
PIPE
LOW
OD HIGH*
APPROXIMATE
SHIPPING WEIGHT
(LBS.)
(KG.)
(Actual)
10
12
3.45
3.50
3.95
3.75
4.05
4.05
4.35
4.40
4.60
4.74
4.80
5.10
5.10
5.30
5.85
6.00
6.15
6.15
6.45
6.50
6.70
6.86
6.90
7.10
7.15
7.35
7.90
8.00
8.25
8.25
8.55
8.55
8.75
8.99
9.05
9.30
9.30
9.50
10.20
10.50
10.60
10.90
11.10 11.10 11.40
11.55
11.75
11.90
12.10
12.60
12.90
13.20 13.20 13.50
13.80
14.10
14.10
14.35
19
8.6
30
13.6
38
17.2
56
25.4
72
32.6
Note:
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
7.1.4
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
Effective: January 1, 2000
ROBAR
ROBAR
SERIES 602
BAKER
STANDARD SIZES:
4" to 30" Nominal Pipe OD. For additional sizes contact
ROBAR for quotation.
APPLICATIONS:
ROBAR 7808 Flanged Coupling Adapters are used to
flexibly adapt plain end pipe to flanged end.
MATERIAL SPECIFICATION:
Center Sleeve: Carbon Steel (ASTM A-36).
Flange:
(AWWA C207 Class D - ANSI 150 lb. drilling), (AWWA Class E or F Flanges available).
End Rings:
Steel, Malleable or Ductile Iron according to size and requirement.
Gaskets:
SBR (Buna S) Rubber, (AWWA C111).
Fasteners:
5/8" NC HSLA Steel body rolled threads. Heavy Hex nuts are standard. (AWWA C111).
Anchor Pins:
(as required) HSLA Steel Anchor Pins (AP) for pipe sizes up to 12" (T304 Stainless Steel available).
Coating:
Two coats of Enamel.
OTHER CONFIGURATIONS:
7806: Enamel coated Center Sleeve and End Rings, Stainless Steel fasteners.
7906: Epoxy coated Center Sleeve and End Rings, Stainless Steel fasteners.
7909: Epoxy coated Center Sleeve, End Rings and bolts.
HOW TO ORDER:
Determine the product number (7808, etc.), nominal flange size, actual pipe OD and whether Anchor Pins (AP) are
required,and then use the appropriate ordering code as shown in the following example.
To couple a 16" OD Steel pipe to a 16" flanged connection, the ordering code is:
7808
16"
16.00"
product
number
nom. flange
size
actual pipe
OD
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
Effective: January 1, 2000
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
7.2.1
ROBAR
ROBAR
BAKER
NOMINAL
SIZE
NO. BOLTS
PIPE
AVAILABILITY* (COUPLING)
SIZE
4
3.94 - 4.86
3
6
5.94 - 6.96
5
8
7.94 - 9.10
6
10
9.94 - 11.25
7
12
11.94 - 13.29
8
14
13.88 - 15.24
8
16
15.88 - 17.89
10
18
17.88 - 20.01
10
20
19.88 - 22.15
12
24
23.88 - 26.41
14
30
25.88 - 30.09
16
Note:
*
**
2
2
4
4-6
6-8
See Note
APPROXIMATE
SHIPPING WEIGHT
(LBS.)
(KG.)
30
13.6
35
15.9
50
22.7
60
27.3
85
38.6
130
59.1
146
66.4
159
72.3
183
83.2
288
130.9
330
150.0
All dimensions are in inches
This is not the coupling range. It is the minimum and maximum of popular sizes. ODs must be
specified.
If ordered, specify maximum working pressure.
For pipe sizes over 12", anchor pins are recommended. Price on application. Submit full pressure
and test data.
No flange bolts or gaskets supplied.
Only popular sizes shown above. All pipe sizes up to 72" and larger are available.
Special coatings, gasket, flanges, fastener materials and isolating boots are available.
For price and availability of items not shown, contact ROBAR and specify the pipe and flange sizes to
be coupled along with any special requirements.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
7.2.2
ROBAR
ROBAR
SERIES 602
BAKER
STANDARD SIZES:
4" to 30" Nominal Pipe OD. For additional sizes contact
ROBAR for quotation.
APPLICATIONS:
ROBAR 7906 Flanged Coupling Adapters are used to
flexibly adapt plain end pipe to flanged end. Used in
areas where corrosion is a factor. The 7906 Body is
Epoxy Coated and Stainless Steel fasteners are
supplied.
MATERIAL SPECIFICATION:
Center Sleeve: Carbon Steel (ASTM A-36).
Flange:
(AWWA C207 Class D - ANSI 150 lb. drilling), (AWWA Class E or F Flanges available).
End Rings:
Steel, Malleable or Ductile Iron according to size and requirement.
Gaskets:
SBR (Buna S) Rubber, (AWWA C111).
Fasteners:
5/8" NC T304 Stainless Steel (ASTM A473). T316 Stainless Steel available.
Anchor Pins:
(as required) HSLA Steel Anchor Pins (AP) for pipe sizes up to 12" (T304 Stainless Steel available).
Coating:
Corrosion Protection Epoxy Coating (AWWA C213-79).
OTHER CONFIGURATIONS:
7806: Enamel coated Center Sleeve and End Rings, Stainless Steel fasteners.
7906: Epoxy coated Center Sleeve and End Rings, Stainless Steel fasteners.
7909: Epoxy coated Center Sleeve, End Rings and bolts.
HOW TO ORDER:
Determine the product number (7906, etc.), nominal flange size, actual pipe OD and whether Anchor Pins (AP) are
required,and then use the appropriate ordering code as shown in the following example.
To couple a 16" OD Steel pipe to a 16" flanged connection, the ordering code is:
7906
16"
16.00"
product
number
nom. flange
size
actual pipe
OD
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
Effective: January 1, 2000
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
7.2.3
ROBAR
ROBAR
BAKER
NOMINAL
SIZE
NO. BOLTS
PIPE
AVAILABILITY* (COUPLING)
SIZE
4
6
8
10
12
14
16
18
20
24
30
3.94 5.94 7.94 9.94 11.94 13.88 15.88 17.88 19.88 23.88 25.88 -
4.86
6.96
9.10
11.25
13.29
15.24
17.89
20.01
22.15
26.41
30.09
3
5
6
7
8
8
10
10
12
14
16
APPROXIMATE
SHIPPING WEIGHT
(LBS.)
(KG.)
2
2
4
4-6
6-8
30
35
50
60
85
130
146
159
183
288
330
See Note
13.6
15.9
22.7
27.3
38.6
59.1
66.4
72.3
83.2
130.9
150.0
Note:
*
**
This is not the coupling range. It is the minimum and maximum of popular sizes. ODs must be
specified.
If ordered, specify maximum working pressure.
For pipe sizes over 12", anchor pins are recommended. Price on application. Submit full pressure and
test data.
No flange bolts or gaskets supplied.
Only popular sizes shown above. All pipe sizes up to 72" and larger are available.
Special coatings, gasket, flanges, fastener materials and isolating boots are available.
For price and availability of items not shown, contact ROBAR and specify the pipe and flange sizes to
be coupled along with any special requirements.
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
7.2.4
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
Effective: January 1, 2000
SECTION 8 - CONTENTS
EXPANSION JOINTS
ROBAR
EXPANSION JOINTS
8808
Expansion Joints
8.1.1
Style 1
8.1.2
Style 2
8.1.2
Style 3
8.1.2
Style 4
8.1.3
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
8.0.1
ROBAR
ROBAR
STANDARD SIZES:
3" to 24" Nominal Pipe OD. Sizes outside of those
specified may be ordered by contacting ROBAR for
quotation. There are four basic styles: Single End
without limit rods (8808-1), Single End with Limit Rods
(8808-2), Double End without limit rods (8808-3), and
Double End with Limit Rods (8808-4). All of these are
available in two other configurations: 8809 and 8906
(see below).
BAKER
APPLICATIONS:
8808 Expansion Joints are used in Steel pipelines
where large longitudinal pipe movements are
concentrated.
Use for piping water, gas, oil and
various chemicals.
MATERIAL SPECIFICATION:
Flanges & Slip Pipe:
ASTM A-7 Mild Steel Plate. Stainless Steel or Chrome Plated Mild Steel Slip Pipes are
recommended for most permanent applications.
Fasteners:
8808: HSLA steel Trackhead bolts, (AWWA C111).
8906: T304 Stainless Steel Trackhead bolts, (ASTM A743-70).
Packing:
Standard packing SBR Rubber / Jute, (AWWA C111), special packings are available.
End Preparation:
Plain end (bevelled for welding)
Flanged end, (AWWA C207 Class D - ANSI 150 lb. drilling), other flanges available.
Grooved end also available.
Coating:
8808: Two coats of Enamel.
8809: As 8808 but with Epoxy coated bolts.
8906: Corrosion Protective Epoxy coated, (AWWA C213-79).
HOW TO ORDER:
Determine the product number (8808, 8809, or 8906), the Expansion Joint style (Style 1, 2, 3, or 4), and the exact
pipe OD (see page 8.1.3) and then use the appropriate ordering code as shown in the following example.
For a 24" OD pipe on which 6" pipe movement is expected, the ordering code is:
8808
1
24.00"
product
number
style
actual pipe
OD
Note:
All expansion joints are built to order. Allow for longer than normal delivery time.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
8.1.1
ROBAR
SERIES 401
ROBAR
BAKER
BODY
FOLLOWER
SLIP PIPE
PIPE STOP
PACKING GLAND
CONSTRUCTION:
8808-1 (STYLE 1) Expansion Joint is designed to satisfy the requirements of most applications. This style allows
for up to 10" of longitudinal pipe movement, has one Slip Pipe and a single Packing Gland with no Limit Rods (see
material specifications page 8.1.1).
FOLLOWER
BODY
SLIP PIPE
PIPE STOP
PACKING GLAND
CONSTRUCTION:
8808-2 (STYLE 2) Similar to details of Style 1 Expansion Joint except that it has two Slip Pipes and two Packing
glands. When the Joint Body is anchored, this style of Expansion Joint allows 4" of pipe movement at each end,
for a total of 8".
FOLLOWER
STOP RING
BODY
LIMIT ROD
SLIP PIPE
PIPE STOP
PACKING GLAND
CONSTRUCTION:
Similar to details of Style 1 Expansion Joint except that a Stop Ring is welded to the Slip Pipe, and the regular
bolts are extended through this ring. A set of double nuts engages the Stop Ring to limit the Slip Pipe from pulling
out of the joint.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
8.1.2
ROBAR
ROBAR
SERIES 401
BAKER
FOLLOWER
STOP RING
BODY
LIMIT ROD
SLIP PIPE
PACKING GLAND
PIPE STOP
CONSTRUCTION:
Similar to details of Style 2 Expansion Joints except that this style has two Stop Rings welded on the Slip pipes As
with Style 3, a set of double nuts engages each Stop Ring to limit the Slip Pipes from pulling out of the joint.
INSTALLATION:
The Expansion Joint may be contracted to 26 1/4" length or fully expanded to 36 1/4" length. The installer sets the
length between these two extremes. The Slip Pipe is welded to one pipe in the line, and the joint Body is welded to
the other pipe. Care should be taken to protect the gasket-bearing surfaces from corrosion or undue wear from line
content or environment.
INFORMATION REQUIRED FOR ORDERING:
1. Total quantity required.
2. Type of pipe, wall thickness and exact OD of pipe.
3. Type and Style of Expansion Joint.
4. Service or line content - water, gas, sewage, etc.
5. Maximum working and test pressures (psi).
6. Calculated movement at each joint, and frequency.
7. Minimum and maximum temperature ranges.
8. End preparation of pipe where Expansion Joint is required (flanged, beveled for welding, etc.).
Phone
(604) 591-8811
Phone
1-800-663-6553
Fax
Effective: January 1, 2000
(604) 591-5288
(450) 641-9525
1-800-315-9525
Fax
(450) 641-4894
8.1.3
SECTION 9 - CONTENTS
MISCELLANEOUS
ROBAR
MISCELLANEOUS
9010
Drilling Machine
9.1.1
9440
Meter Couplings
9.3.0
9626
Adjustable Inserts
9.4.1
9999
Recreational Horseshoes
9.5.1
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
9.0.1
ROBAR
ROBAR
SERIES 901
APAC
ADAPTER
TYPE 9010:
A compact tool that drills mains for 3/4", 1", 1
1/4", 1 1/2" and 2" CC or IP Taps (see
manufacturer's notes).
Completes the operation before you can set up
older, heavier machinery.
Removes the coupon from the pipe - No
drillings in your water system.
For tapping (hot & dry) DI, CI, A/C, Steel and
Plastic mains.
Basic machine includes: ratchet wrench, pilot
drill, Allen wrench and carrying case. (See
page 9.1.2)
Machine weight: 7 lbs.
Shipping weight
w/carrying case: 17 lbs.
CUTTER
DRILL
Note:
The 9010 is not recommended for use on any fluid distribution system other than water.
The use of mechanical assist tools such as drill motors or impact hammers is not recommended, as
such use may bind the cutter and possibly break the stainless steel shaft.
Avoid the drilling of pipes with pressures in excess of 175 psi, as higher pressures may blow out seals.
Observe all accepted safety precautions when operating machine.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
9.1.1
ROBAR
SERIES 901
ROBAR
APAC
DESCRIPTION
A
Ratchet Wrench
B
Shaft Drive Nut
C
Brass Bearing Cap
D
Feed Hand Wheel
E
Feed Wheel Set Screw
F
Thrust Bearing
G
Brass Feed Tube
H
Teflon Wiper
I
Metal Snap Ring
J
Brass Body
K
"O" Ring Packing
L
Gasket (machine to adapter)
M
Stainless Steel Shaft
N
Shaft Snap Ring
O
Pilot Drill
P
Pilot Drill Set Screw
Q
Allen Wrench
R
Shell Cutter Bushing
B
C
D
E
F
G
M
CATALOG
NUMBER
908-080
908-081
908-082
908-083
908-084
908-085
908-086
908-087
908-088
908-089
908-090
908-091
908-092
908-093
908-094
908-095
908-096
908-097
Carrying Case
Basic Machine
908-000
9010
P
J
N
O
K
L
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
9.1.2
ROBAR
SIZES AVAILABLE:
1 1/2" and 2" Nominal.
APPLICATIONS:
ROBAR 9440, 9450, or 9470 Meter Coupling Flanges
are used for drilling and tapping to NPT standards to
mate with Flanged Water Meters.
MATERIAL SPECIFICATION:
Body:
Cast Ductile Iron (ASTM A536).
O-Ring:
NBR (BUNA N) Rubber, (ASTM A5568).
Coating:
9440: Two coats of Enamel.
OTHER CONFIGURATIONS:
9450: Corrosion Protective Epoxy coating (AWWA C213-79).
9470: 85-5-5-5 Waterworks Bronze (ASTM B62 and AWWA C-800).
HOW TO ORDER:
Determine the product number (9440, 9450 or 9470) and nominal size and then use the appropriate ordering code
(see table below) as shown in the following example.
For a 2" Meter Flange in Epoxy coated Ductile Iron, the ordering code is: 9450 - 2
NOMINAL
SIZE
1 1/2"
2"
Note:
Phone:
Fax:
E-mail:
APPROXIMATE
SHIPPING WEIGHT
(LBS.)
(KG.)
9440
2.25
1.1
9450
2.25
1.1
9470
2.07
1.2
9440
2.75
1.3
9450
2.75
1.3
9470
3.00
1.4
All dimensions are in inches
B.C.
PRODUCT
NUMBER
QUEBEC Phone:
Fax:
9.3.0
ROBAR
STANDARD SIZES:
6" to 24" Nominal Pipe OD. Larger sizes are available
upon request.
APPLICATIONS:
ROBAR 9226 Adjustable Inserts are for use on thin
wall PVC or High Density Polyethylene pipe, to add
hoop strength to pipe when using ROBAR couplings,
repair clamps or restraining devices.
MATERIAL SPECIFICATION:
T304 stainless steel, fully passivated for maximum corrosion protection.
HOW TO ORDER:
Determine the product number 9
( 626) and exact Inside Diameter of PVC or High Density Polyethylene pipe and
the insert length (6", 8" or 12") and then order by using the appropriate ordering code as shown in the following
example.
For an 8" long insert required for a 6" SDR 26 High Density Polyethylene pipe (6.08" ID), the ordering code is:
9626
6.08"
x
8"
product
number
inside
diameter
insert
length
Note:
9626 Adjustable inserts are available for 6.19" ID and larger. Fixed inserts are available from 4.50" ID.
Exact ID is required for fixed inserts.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
9.4.1
ROBAR
3"
14"
Sand (or blue
clay) fill
5 1/2"
Maximum Weight is 2 1/2 lbs.
Two pairs of shoes in a set
Each pair is identified as "A" or "B"
THE COURT
Foul Line
Foul Line
6'
34'
6'
CL
CL
3'
a
CL
6'
Pin
3'
40'
Plan View
Horseshoe "Pitch"
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
9.5.1
ROBAR
Singles:
One player throws two "A" horseshoes at the opposite stake. His opponent throws "B" horseshoes
in turn at the same stake. They then walk to the stake, tally the score and pitch back towards the
first stake.
Doubles:
Partners separate, one at each stake. Shoes are tossed by one set of opponents as discussed in
Singles. Their partners toss their horseshoes back in turn. Scores are added together without the
necessity of travel between ends.
Pitching:
The pitcher must stand with his feet behind the foul line until the horseshoe has left his hand. The
opponent must not distract the pitcher. Neither player may walk to the opposite stake until four
horseshoes have been thrown. Horseshoes should not be touched or moved until scores have
been decided.
Scoring:
In order to score one point, a shoe must be within a specified distance of the stake. Official rules
state 6 inches. For convenience in recreation, the width across the "prongs" may be used.
A "ringer" is a horseshoe which encircles the stake so that a straight edge will touch the tips of the
prongs without touching the stake. Ringers score 3 points. In official rules a leaning shoe has no
value over one touching the stake, but in recreational play 2 points may be allotted to "leaners".
Any horseshoe closer to the stake than an opponent's scores points. If one player scores one
ringer and his opponent also scores a ringer, they cancel. If one player scores two ringers and his
opponent scores one ringer, the first player scores 3 points. The high scorer in one innning
pitches first in the next inning. If an inning results in "no points" the order of pitching alternates.
Official Rules: The preceeding rules are not intended for official play. A good reference book containing the
official rules of horseshoe pitching is "The Story of Horseshoes" by Otto W. R. Reno, Vintage
Press.
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
9.5.2
SECTION 10 - CONTENTS
AFTERWORD
ROBAR
Glossary
B.C.
Phone:
Fax:
E-mail:
10.1.1
QUEBEC Phone:
Fax:
10.0.1
GLOSSARY
ROBAR
ASTM
ANODE
ANSI
AWWA
CATHODICALLY PROTECTED
CC
CENTER SLEEVE
END RINGS
HDPE
HSLA STEEL
IP
IPS
MS
Mild Steel
NBR (Buna N)
NC
PVC
Polyvinyl Chloride
SBR (Buna S)
SDR
B.C.
Phone:
Fax:
E-mail:
QUEBEC Phone:
Fax:
10.1.1