Professional Documents
Culture Documents
Set the clock rate for a router with a DCE cable to 64K Router(config-if)clock rate 64000
Static route the remote network is 172.16.1.0, with a mask of 255.255.255.0, Router(config)#ip route 172.16.1.0
the next hop is 172.16.2.1, at a cost of 5 hops 255.255.255.0 172.16.2.1 5
Shows all logs that the router has in its memory show log
View type of serial cable on s0 show controllers 0 (note the space between the 's'
'0')
Display access lists, this includes the number of displayed show access-lists
matches
Check the router can see the ISDN switch show isdn status
Upgrade the router IOS from a TFTP server copy tftp flash
router>enable
router#configure terminal
router(config)#line console 0
router(config-line)#login
router(config-line)#password submask
router(config-line)#exit
router(config)#exit
router>enable
router#configure terminal
router(config)#line console 0
router(config-line)#no login
router(config-line)#no password
router(config-line)#exit
router(config)#exit
router>enable
router#configure terminal
router(config)#no enable secret
router(config)#exit
router>enable
router#show version
router>enable
router#configure terminal
router(config)#int s0/0
router(config-if)#shutdown
router>enable
router(config)#show interfaces s0/0
router>enable
router#configure terminal
router(config)#interface s0/0
router(config-if)#clock rate 64000
DTE/DCE Status
router>enable
router#show controllers s0/0
router#write memory
router#write erase