Professional Documents
Culture Documents
Item
No.
1
Description of Item
Unit
Providing and maintaining fully equipped Semi pucca field office (Appendix 5) with necessary
furniture, Sanitary & Electrical/ power facilities, water supply arrangement, office and survey
equipment for the use of the Engineer and his staff, all complete including removal of
structures and clearing the site on completion of the work. All materials and equipment shall
be the property of the contractor. The contractor shall submit for the approval of the Engineer
the detailed plans and drawings of the field office building. Minimum: 84.00 sqm
LS
Supplying Sign Board at site of 1.5mx1.0m size in plain CI sheet; painting, writing,
erecting & fixing with bamboo including all complete as per direction of Engineer-in-Charge.
LS
Break up
1)
Quoted Rate
Total
1.000
2)
1)
4.000
2)
Conducting static load test as per ASTM D1143 or equivalent standard for the cast in situ/ each
precast pile providing required scaffolding, bracing, jacks, pressure test gauge, loading
unloading, arranging other necessary plants and equipment including staging,
mobilizaConducting static load test as per ASTM D1143 or equivalent standard for the cast in
situ/ precast pile providing required scaffolding, bracing, jacks, pressure test gauge, loading
unloading, arranging other necessary plants and equipment including staging, mobilization,
demobilization, hire charge, gunny bags, sand and filling sacs/gunny bags for loading /
concrete Block or equivalent, record readings and preparation of results in standard forms
and other incidental charges as per standard practice and procedures including submission of
load test report, furnishing all graph and chart etc. complete in all respects approved and
accepted by the Engineer (Minimum two cyclic loading). Before commencing load test,
Contractor shall submit method statement for conducting load test to the Engineer for
approval. However, Engineers approval shall not relieve the Contractor of his responsibilities
and obligations under Contract. using sand filled gunny bag Above 75 ton and up to 125 ton
1)
1 of 185
2.000
4.000
In Figure
(Tk)
In Word
(Tk)
Item
Description of Item
Unit
No.
3 Conducting static load test as per ASTM D1143 or equivalent standard for the cast in situ/ each
precast pile providing required scaffolding, bracing, jacks, pressure test gauge, loading
unloading, arranging other necessary plants and equipment including staging,
mobilizaConducting static load test as per ASTM D1143 or equivalent standard for the cast in
situ/ precast pile providing required scaffolding, bracing, jacks, pressure test gauge, loading
unloading, arranging other necessary plants and equipment including staging, mobilization,
demobilization, hire charge, gunny bags, sand and filling sacs/gunny bags for loading /
concrete Block or equivalent, record readings and preparation of results in standard forms
and other incidental charges as per standard practice and procedures including submission of
load test report, furnishing all graph and chart etc. complete in all respects approved and
accepted by the Engineer (Minimum two cyclic loading). Before commencing load test,
Contractor shall submit method statement for conducting load test to the Engineer for
approval. However, Engineers approval shall not relieve the Contractor of his responsibilities
and obligations under Contract. using sand filled gunny bag Above 75 ton and up to 125 ton
Quantity
Break up
2)
2 of 185
2.000
Quoted Rate
Total4.000
In Figure
(Tk)
In Word
(Tk)
Item
No.
4
Quantity
Description of Item
Unit
Boring and casting of RCC cast-in-situ piles up to the required depth and diameter with
temporary steel casing in all types of soils including 2-chamber slurry tank, drilling"Boring and
casting of RCC cast-in-situ piles up to the required depth and diameter with temporary steel
casing in all types of soils including 2-chamber slurry tank, drilling with bentonite circulation
(Dry Bentonite powder of liquid limit of minimum 350 shall be mixed with water @ minimum
4% by weight to make the fresh drilling fluid of viscosity between 32-50 seconds and density
less than 1.1gm/cc). Washing bore hole with bentonite slurry (until the slurry from bore hole
bottom have density less than 1.15gm/cc and sand less than 4%) placing of reinforcement
and placing concrete by tremie pipe with ordinary Portland cement, sand (minimum FM 2.50)
and 19mm down graded crushed stone chips , (LAA value not exceeding 30) to result
minimum ultimate cylinder crushing strength of 250 kg/cm2 at 28 days (suggested minimum
mix proportion 1:1.5:3) with allowable slump of 150mm to 200mm (using necessary admixture
: ASTM C494/C494M and additional cement) including cost of all materials, labour, equipment
and all incidental charges but excluding the cost of reinforcement and its fabrication, etc. all
complete as per design, drawing, specifications and direction o f the Engineer. Additional
quantity of cement be added, if required to attain the aforementioned concrete strength, by
the contractor at his own costs.(Boring m ethod shall be selected as set in the drawing).
BORING PERCUSSION METHOD: Direct Mud Circulation (DMC) 600mm dia
Break up
1)
1,232.000
2)
1,848.000
Integrity test of cast-in-situ/pre-cast pile by placing a small accelerometer on the top of a pile set
while hitting the pile head with a small hammer. The shock wave traveling through the pile
propagate with the velocity of sound in concrete which is 3000-3500 m/s approximately or as
decided by the Engineer, as per approved method. for up to 10 nos piles
1)
3.000
2)
3.000
38mm thick on an average roof top cement concrete screed in proportion (1:1.5:3)
sqm
with 12mm down graded 1st class brick chips/picked chips, cement and sand (minimum FM
1.8) with neat cement finishing on the following day of roof slab casting including mixing
concrete, laying, cost of all materials, labour and transportation to the site, finishin the edges
and corners, curing for the requisite period etc. all complete as per drawing, specification and
direction of the E-I-C
1)
346.184
2)
346.184
Sand filling in foundation trenches and inside plinth with sand (minimum FM 0.80) in 150mm cum
layers in/c leveling, watering and consolidating each layer up to finished level etc. all complete
as per direction of the E-I-C. Dry density after compaction shall not be less than 95% of MDD
(STD).
1)
702.692
2)
819.910
Earth filling inside plinth in 150mm layers with earth available within 90m of the nbuilding site, cum
watering, leveling and consolidating each layer up to finished level, etc. all complete as per
direction of the E-I-C.. Dry density after compaction shall not be less than 90% of MDD
(STD).
1)
154.166
2)
193.010
3 of 185
Quoted Rate
Total
3,080.000
6.000
692.368
1,522.602
347.176
In Figure
(Tk)
In Word
(Tk)
Item
No.
9
10
11
12
13
14
15
16
Quantity
Description of Item
Unit
Break up
Site improvement/earth filling in foundation trenches and plinth with specified soil in/c cum
supplying, carrying, filling by throwing earth in 150mm layers with carted earth carried by truck
or any other means to be supplied at the contractors own cost etc. all complete as per
direction of the E-I-C. (Carried from a distance beyond 200m). Municipal area.
1)
415.350
2)
623.025
Single layer brick flat soling with 1st class or picked bricks, true to level, camber/super cum
elevation and grade including carrying bricks, filling the interstices tightly with sand of
minimum FM 0.80, etc. all complete as per direction of the E-I-C.
1)
634.745
2)
634.745
Mass concrete work in foundation or floor with Portland cement, sand (minimum FM 1.20) cum
and 1st class/picked brick chips 20mm down graded (LAA value not exceeding 40), including
shuttering, mixing by concrete mixer machine, casting, laying compacting and curing for the
requisite period breaking bricks into chips etc. all complete as per direction of the E-IC.
Cylinder crushing strength of concrete should not be less than 105kg/cm2 at 28 days of curing
(suggested mix proportion 1:3:6). Additional quantity of cement to be added if required to
attain the strength at the contractors own cost. Mass concrete in foundation (1:3:6) with
cement, sand and brick chips.
1)
6.926
2)
7.241
Providing single layer polythene sheet (0.18mm thick) weighing one kilogram per 6.5 square sqm
meter in floor or any where in ground floor underneath the cement concrete, etc. all complete
as per specifications and direction of the E-I-C.
1)
532.250
2)
616.890
Brick work with 1st class bricks in cement mortar (1:6) in foundation and plinth, filling the cum
interstices tightly with mortar, raking out joints, cleaning and soaking bricks at least for 24
hours before use, washing of sand, curing for requisite period, etc. all complete as per
direction of the E-I-C. (Minimum FM of sand:1.2)
1)
10.203
2)
10.481
Brick work of 1st class bricks in cement mortar (1:6) in superstructure in/c raking out joints, cum
filling interstices tightly with mortar, cleaning and soaking bricks at least for 24 hours before
use, washing of sand, necessary scaffolding, curing for requisite period, etc. all complete as
per direction of the E-I-C. (Minimum FM of sand:1.2) Ground Floor
1)
7.208
2)
7.208
Supplying and fabrication of M.S High strength deformed bar/ Twisted bar reinforcement of
required size and length for all types of RCC work in/c straightening the rod, removing ruts,
cleaning, cutting, hooking, bending, binding with supply of 22 B.W.G. GI wire, placing in
position, in/c lapping, spacing and securing them in position by concrete blocks (1:1), metal
chairs, etc. complete in/c cost of all materials, labour, local handling incidentals necessary to
complete the work as per specifications, drawings and direction of the E-I-C. (Measurement
will be based on standard weight of 490 lbs/ft3. Chairs, laps and separators will not be
measures for payment. The cost of these remains inclusive in the unit rate) MS Ribbed Weld
able Bar (Deformed Bar) of steel grade RB 400W) with minimum yield stress = 400 MPa &
Elongation 14%
1)
118,572.694
2)
139,426.906
1)
67.340
kg
Brick work of 1st class bricks in cement mortar (1:6) in superstructure in/c raking out joints, cum
filling interstices tightly with mortar, cleaning and soaking bricks at least for 24 hours before
use, washing of sand, necessary scaffolding, curing for requisite period, etc. all complete as
per direction of the E-I-C. (Minimum FM of sand:1.2) Add for each additional floor up to 5th
floor
4 of 185
Quoted Rate
Total
1,038.375
1,269.490
14.167
1,149.140
20.684
14.416
257,999.600
144.740
In Figure
(Tk)
In Word
(Tk)
Item
16 Brick work of 1st class bricks in cement
mortar (1:6)
in superstructure in/c raking out joints, Unit
cum
Description
of Item
No. filling interstices tightly with mortar, cleaning and soaking bricks at least for 24 hours before
use, washing of sand, necessary scaffolding, curing for requisite period, etc. all complete as
per direction of the E-I-C. (Minimum FM of sand:1.2) Add for each additional floor up to 5th
floor
Quantity
Break up
2)
5 of 185
77.400
144.740
In Figure
Total
(Tk)
Quoted Rate
In Word
(Tk)
Item
No.
17
18
19
20
21
Quantity
Description of Item
Unit
Break up
125mm brick work with 1st class bricks in cement mortar (1:4) and making bond with sqm
connected walls in/c necessary scaffolding, raking out joints, cleaning and soaking the bricks
at least for 24 hours before use, washing of sand, curing for requisite period, etc. all complete
as per direction of the E-I-C for all floors. (Minimum FM of sand:1.2) Ground Floor
1)
32.904
2)
32.904
125mm brick work with 1st class bricks in cement mortar (1:4) and making bond with sqm
connected walls in/c necessary scaffolding, raking out joints, cleaning and soaking the bricks
at least for 24 hours before use, washing of sand, curing for requisite period, etc. all complete
as per direction of the E-I-C for all floors. (Minimum FM of sand:1.2) Add for each additional
floor up to 5th floor
1)
346.754
2)
346.754
Reinforced cement concrete works (1:1.5:3) to give a minimum Cylinder strength of 250 cum
Kg/cm2 concrete from a machine mixed typical batch with fresh Portland
cement, best quality coarse sand (minimum FM 2.5) and 20mm down graded crushed stone
chips (Preferably stone chips from Madhyapara, Dinajpur) in/c cost of breaking chips,
screening through proper sieves, cleaning and washing thoroughly, centering, shuttering with
MS sheet (minimum 12/14 BWG) and steel form, making shuttering fully leak proof, placing of
reinforcement cage in position, mixing the aggregates with mixer machine, casting in steel
forms, compacting by Mechanical vibrators and tapered rods and curing for 28 days etc all
complete as per direction of the Engineer in charge (Excluding the cost of reinforcements and
its fabrication) etc. all complete as per direction of the E-I-C. In foundation beam
1)
51.354
2)
51.354
Reinforced cement concrete works (1:1.5:3) to give a minimum Cylinder strength of 250 cum
Kg/cm2 concrete from a machine mixed typical batch with fresh Portland cement, best quality
coarse sand (minimum FM 2.5) and 20mm down graded crushed stone chips (Preferably
stone chips from Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper
sieves, cleaning and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14
BWG) and steel form, making shuttering fully leak proof, placing of reinforcement cage in
position, mixing the aggregates with mixer machine, casting in steel forms, compacting by
Mechanical vibrators and tapered rods and curing for 28 days etc all complete as per direction
of the Engineer in charge (Excluding the cost of reinforcements and its fabrication) etc. all
complete as per direction of the E-I-C. In pedestal, column, capital lift wall and wall : Below
Plinth Level and in Ground Floor
1)
18.936
2)
18.936
Reinforced cement concrete works (1:1.5:3) to give a minimum Cylinder strength of 250 cum
Kg/cm2 concrete from a machine mixed typical batch with fresh Portland cement, best quality
coarse sand (minimum FM 2.5) and 20mm down graded crushed stone chips (Preferably
stone chips from Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper
sieves, cleaning and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14
BWG) and steel form, making shuttering fully leak proof, placing of reinforcement cage in
position, mixing the aggregates with mixer machine, casting in steel forms, compacting by
Mechanical vibrators and tapered rods and curing for 28 days etc all complete as per direction
of the Engineer in charge (Excluding the cost of reinforcements and its fabrication) etc. all
complete as per direction of the E-I-C. In pedestal, column, capital lift wall and wall : Add for
each additional floor up to 5th Floor
1)
41.344
6 of 185
Quoted Rate
Total
65.808
693.508
102.708
37.872
82.688
In Figure
(Tk)
In Word
(Tk)
Item
Item
21 Reinforced cement concrete works Description
(1:1.5:3) to of
give
a minimum Cylinder strength of 250 Unit
cum
No.
Kg/cm2 concrete from a machine mixed typical batch with fresh Portland cement, best quality
coarse sand (minimum FM 2.5) and 20mm down graded crushed stone chips (Preferably
stone chips from Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper
sieves, cleaning and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14
BWG) and steel form, making shuttering fully leak proof, placing of reinforcement cage in
position, mixing the aggregates with mixer machine, casting in steel forms, compacting by
Mechanical vibrators and tapered rods and curing for 28 days etc all complete as per direction
of the Engineer in charge (Excluding the cost of reinforcements and its fabrication) etc. all
complete as per direction of the E-I-C. In pedestal, column, capital lift wall and wall : Add for
each additional floor up to 5th Floor
Quantity
Break up
2)
7 of 185
41.344
Quoted Rate
82.688 In Figure
Total
(Tk)
In Word
(Tk)
Item
No.
22
23
24
25
Quantity
Description of Item
Unit
Break up
Reinforced cement concrete works (1:1.5:3) to give a minimum Cylinder strength of 250 cum
Kg/cm2 concrete from a machine mixed typical batch with fresh Portland cement, best quality
coarse sand (minimum FM 2.5) and 20mm down graded crushed stone chips (Preferably
stone chips from Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper
sieves, cleaning and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14
BWG) and steel form, making shuttering fully leak proof, placing of reinforcement cage in
position, mixing the aggregates with mixer machine, casting in steel forms, compacting by
Mechanical vibrators and tapered rods and curing for 28 days etc all complete as per direction
of the Engineer in charge (Excluding the cost of reinforcements and its fabrication) etc. all
complete as per direction of the E-I-C. In Tee Beam, Ell Beam, Rectangular Beam etc.
(exposed breadth and width of ribs to be measured only). Ground Floor
1)
13.986
2)
13.986
Labour for breaking head of cast-in-situ bored pile/pre-cast pile up to required length by any
means and removing the dismantled materials, such as, concrete to a safe distance including
scrapping and removing concrete from steel/MS rods, preparation and making of platform
where necessary, carrying, all sorts of handling, stacking the same properly after clearing,
leveling and dressing the site and clearing the river bed, etc. all complete as per direction of
the E-I-C. (Measurement will be given for the actual pile head volume to be broken).
cum
1)
11.424
2)
11.424
Supplying, fitting and fixing door frame with MS angle (38mmx38mmx6mm), fixing, 250mm
long 6 nos. of iron clamps of same size (one end bifurcated) with vertical members of the
frame, fixing the frame in wall with cement concrete (1:2:4), mending good damages, fixing 3
nos. of 100mm size iron hinges with the vertical members of the frame for single leaf shutter,
painting all iron faces in 2 coats over a coat of priming with enamel paint of approved colour
and quality, in/c cutting, sizing, welding for all floors, etc. all complete as per plan and direction
of the E-I-C.
1)
77.400
2)
77.400
1)
30.240
2)
30.240
Supplying, fitting and fixing 38mm thick well matured wood panel door shutters (minimum sqm
250mm wide plank), top, rail and styles of sections (100mmx38mm), lock rail(125mmx38mm)
and bottom rail (225mmx38mm) paneling 38mm thick both sides raised, provided with best
quality 6 nos. 100mm iron hinges, 2 nos. best quality 12mm dia 300mm and 225mm long iron
tower and socket bolts 2 nos. heavy type nickel plated handle, hinge cleats, buffer blocks and
finished with sand papering for all floors etc. all complete as per direction of the E-I-C.
(Double leaf. All sizes of wood are finished). Mehagoni wood
8 of 185
Quoted Rate
Total
27.972
22.848
154.800
60.480
In Figure
(Tk)
In Word
(Tk)
Item
No.
26
27
28
29
30
31
Quantity
Description of Item
Unit
Break up
Supplying fitting, fixing of UPVC hollow or solid plastic door shutter having specific gravity each
1.35-1.45, thickness 1.7 mm - 2.2 mm and other physical, chemical, thermal, fire resistivity
properties etc. as per BSTI approved manufacturer standards or ASTM, BS/ISO/IS standards
of different sizes fitted fixed with uPVC plastic door frame weighing 5.82 kg/m2 with at least 3
Nos Stainless Steel hinges fitted with min 64 Nos of 3.17 mm - 3.97 mm dia 12.7 mm long
rivets, 12 Nos 25.4 mm Stainless Steel screws. 9.38 mm dia, 150 mm long Stainless Steel
tower bolts 2 Nos, 146 mm long Stainless Steel handle fitted with rivet, fitted with 2 Nos of G.I
inner joint 234.95 mm x 127 mm clamp, 76.2 mm x 57.15 mm, 25 mm dia 1 no Stainless Steel
haspbolt, special type round rack, carrying the same to site and local carriage etc. all
complete as per direction of the E-I-C. 760 x 2130 mm uPVC plastic shutter (solid)
1)
14.000
2)
14.000
Supplying, fitting and fixing window grills of any design made with F.I. bar (20mmx5mm) in/c sqm
fabricating, welding, painting with two coats of synthetic enamel paint over a coat of
anticorrosive priming etc. all complete for all floor as per direction of the E-I-C. (Total wt.per
m2 should be 16.50kg. For each kg excess or less add or deduct, as the case may be, @Tk.
45.00 perkg)
1)
208.683
2)
208.683
Supplying, fitting and fixing of aluminium sliding window as per the U.S. Architectural sqm
Aluminium Manufacturers Association (AAMA) standard specification having 1.5mm thick
outer bottom (size:75.50mm, 17.79mm), 1.5mm thick outer top (size:75.50mm, 26.80mm)
1.5mm thick shutter top (size:33mm, 26.80mm, 22mm), 1.5mm thick shutter bottom
(size:60mm, 24.40mm), 1.5mm thick outer side (size:75.50mm, 19.90mm), 1.5mm thick
sliding fixed side (size:31mm, 26mm), 1.5mm thick shutter lock (size:49.20mm, 26.0mm) and
1.5mm thick interlock (size:34.40mm, 32.10mm). Sections all aluminium members will be
anodized to aluminium bronze/silver colour with a coat not less than 15 microns in thickness
and density of 4mg/cm2 etc. in/c all accessories like handle, locks (Japan), roller, stopper etc.
keeping provision for fitting 5mm thick glass in/c neoprene, sealant for all floors etc. complete
in all respect as per drawing and direction of the E-I-C. Bronze colour[Size :
900mmx1400mm]
1)
202.623
2)
202.623
Supplying, fitting and fixing in Aluminum door frames, window, partitions and curtain wall sqm
distortion free glass of approved quality and shade including cost of fitting fixing all necessary
accessories all floors etc. complete in all respect as per drawing and direction of the E-I-C.
5mm thick clear glass
1)
202.623
2)
202.623
Minimum 12mm thick cement plaster (1:4) to dado and plinth wall up to 150mm below ground
level with neat cement finishing in/c washing of sand, finishing the edges and corners and
curing for the requisite period etc. all complete as per direction of the E-I-C (Sand minimum
FM 1.2).
sqm
1)
40.134
2)
84.600
Minimum 12mm thick cement plaster (1:6) to wall both inner and outer surface, finishing the
corner and edges in/c washing of sand cleaning the surface, scaffolding and curing for the
requisite period etc. all complete as per direction of the E-I-C. (Sand minimum FM
1.2).Ground floor
sqm
1)
184.875
2)
184.875
9 of 185
Quoted Rate
Total
28.000
417.366
405.246
405.246
124.734
369.750
In Figure
(Tk)
In Word
(Tk)
Item
No.
32
Quantity
Description of Item
Minimum 12mm thick cement plaster (1:6) to wall both inner and outer surface, finishing the
corner and edges in/c washing of sand cleaning the surface, scaffolding and curing for the
requisite period etc. all complete as per direction of the E-I-C. (Sand minimum FM 1.2). Add
for each additional floor for 5th floor
Unit
sqm
Break up
1)
1,748.700
2)
1,748.700
10 of 185
Quoted Rate
Total
3,497.400
In Figure
(Tk)
In Word
(Tk)
Item
No.
33
34
35
36
37
38
39
Quantity
Description of Item
Unit
Minimum 6mm thick cement plaster (1:4) to ceiling RCC columns, beams, surface of
staircase, sunshades, cornices, railings, drop wall, louvers, fins and finishing the corners and
edges in/c washing of sand cleaning the surface, scaffolding and curing for the requisite
period etc. all complete as per direction of the E-I-C. (Sand minimum FM 1.2). Ground Floor
sqm
Minimum 6mm thick cement plaster (1:4) to ceiling RCC columns, beams, surface of stair
case, sunshades, cornices, railings, drop wall, louvers, fins and finishing the corners and
edges in/c washing of sand cleaning the surface, scaffolding and curing for the requisite
period etc. all complete as per direction of the E-I-C. (Sand minimum FM 1.2). Add for each
additional floor upto 5th floor
sqm
Break up
1)
624.710
2)
624.710
1)
1,281.245
2)
1,281.245
1)
258.380
2)
258.380
1)
463.150
2)
469.580
Supplying, fitting and fixing unglazed floor tiles (local made) on 20mm thick cement mortar
sqm
(1:2) base and raking out the joints with white cement in/c cutting and laying the tiles in proper
way and finishing with care, etc. all complete as per direction of the E-I-C. Sand of minimum
FM 1.2 to be used. GP (Homogeneous) 400x400 mm size unglazed floor tiles
1)
695.766
2)
695.766
Supplying, fitting and fixing glazed wall tiles of different size (local made) on 20mm thick
cement mortar (1:3) base and raking out the joints with white cement in/c cutting and laying
the tiles in proper way and finishing with care, etc. all complete as per direction of the E-I-C.
Sand of minimum FM 1.2 to be used. coloured glazed wall tiles
sqm
1)
103.262
2)
103.262
Painting with plastic emulsion paint of best quality and approved colour from authorized coat
for each coat and successive coat is to be applied after manufacturer in a seal container, to
wall and ceiling in two coats over a coat of priming coat. Applying one vertical and one
horizontal coat for each coat and successive coat is to be applied after drying up of previous
coat by brush/roller/spray in/c cleaning the plinth, floors, doors, windows, portions and
ventilators by washing, rubbing, as necessary and sand papering the surface and necessary
scaffolding, etc. curing for the requisite period etc. all complete for all floors i/c cost of all
materials as per direction of the E-I-C.
sqm
1)
3,005.960
2)
3,005.960
Providing drip course/nosing/throating at the edge of sunshade or cornice with cement mortar
(1:2) in/c. scaffolding, curing at least for 7 days etc. all complete for all floors as per direction
of the E-I-C (Sand minimum FM 1.2).
38mm thick patent stone floor (1:2:4) with Portland cement, best quality coarse sand (50% of
minimum FM 1.2 and 50% of minimum FM 2.3) and 10mm down graded crushed stone chips
(Preferably stone chips from Madhyapara, Dinajpur), in/c chips screening, mixing, laying the
concrete in alternate panels, compacting and finishing the top with neat cement, curing for
requisite period, etc. all complete as per direction of the E-I-C.
sqm
11 of 185
Quoted Rate
Total
1,249.420
2,562.490
516.760
932.730
1,391.532
206.524
6,011.920
In Figure
(Tk)
In Word
(Tk)
Item
No.
40
41
42
43
Quantity
Description of Item
On exterior surface applying as per manufacturer instruction specific coat ofweather coat of
approved quality and colour delivered from authorized local agent of the manufacturer in a
sealed container. Applying one vertical and one horizontal coat for each coat and successive
coat is to be applied after drying up of previous coat by brush/roller/spray in/c cleaning,
washing, rubbing, as necessary and sand papering the surface and necessary scaffolding,
etc. all complete for all floors i/c cost of all materials as per direction of the E-I-C.3 coat
Unit
sqm
Break up
1)
1,892.625
2)
1,892.625
Painting to door and window frames and shutters in two coats with synthetic enamel paint of
sqm
best quality and approved colour over a coat of priming. Applying one vertical and one
horizontal coat for each coat and successive coat is to be applied after drying up of previous
coat by brush/roller/spray in/c cleaning, washing, rubbing, as necessary and sand papering
the surface and necessary scaffolding, etc. all complete for all floors i/c cost of all materials as
per direction of the E-I-C.
1)
64.002
2)
64.002
Manufacturing,
supplying,
fitting
and
fixing
collapsible
gate
made
of sqm
20mmx20mmx3mm/25mmx25mmx3mm MS angle placed @112mm c/c vertically and
connecting the same with each other with 20mmx3mm/25mmx3mm MS flat bar scissors
525mm/600mm long provided in three rows in/c cutting the different MS members to required
sizes, fabricating, welding, riveting with required size rivets, providing required size wheels,
pulling handles on both sides, suitable looking arrangement and finally placing the same in
position in between two nos. 50mmx50mmx6mm MS Tee rail made by welding two nos.
50mmx6mm MS flat bar fitted and fixed at top and bottom with R.C.C. lintel/roof slab, floors
and side wall with required nos. 150mm to 225mm long 38mmx6mm MS flat bar clamps one
end welded with the gate member and the other end bifurcated and embedded in C.C (1:2:4)
in/c cutting holes and mending good the damages, painting two coats with approved synthetic
enamel paint over a coat of anticorrosive painting etc. all complete as per drawing and design
and direction of E-I-C. Collapsible gate made of 20mm x 20mm x 3mm M.S. angle as vertical
member and 20mm x 3mm F.I bar as scissors.
1)
20.130
2)
20.130
Reinforced cement concrete work in well caps, pile caps, bearing sheets, abutment base, etc. cum
with Portland cement, sand (minimum FM 1.80) and 20mm down well graded crushed stone
chips (Preferably stone chips from Madhyapara, Dinajpur), (LAA value not exceeding
30),admixture with proper dodge, including shuttering, mixing by concrete mixer machine
casting, laying, compacting and curing, for 28 days, breaking stone boulders into chips etc. all
complete as per direction of the E-I-C but excluding cost of reinforcement. Cylinder crushing
strength of concrete should not be less than 250kg/cm2 at 28 days of curing (suggested mix
proportion 1:1.5:3, w/c max. 0.4). Additional quantity of cement to be added if required to
attain the strength at the contractor's own cost.
1)
51.360
2)
51.360
12 of 185
Quoted Rate
Total
3,785.250
128.004
40.260
102.720
In Figure
(Tk)
In Word
(Tk)
Item
No.
44
45
46
Quantity
Description of Item
Unit
Break up
Earthwork in excavation of foundation trenches, including layout, by excavating earth to the cum
lines, grades and elevation as shown in the drawing providing center lines, local bench mark
pillars, fixing bamboo spikes and marking layout with chalk powder filling baskets, carrying
and disposing of all excavated materials at a safe distance designated by the E-I-C inall types
of soils except rocky, gravelly, slushy or organic soil, leveling, ramming, dressing and
preparing the base, etc. all complete for an initial excavation depth of 2m and an initial lead
not exceeding 20m, including arranging all necessary tools and equipment at work site, etc.
complete as per direction of the E-I-C.
1)
135.951
2)
135.951
Reinforced cement concrete works (1:1.5:3) to give a minimum Cylinder strength of 250 cum
Kg/cm2 concrete from a machine mixed typical batch with fresh Portland cement, best quality
coarse sand (minimum FM 2.3) and 20mm down graded crushed stone chips (Preferably
stone chips from Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper
sieves, cleaning and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14
BWG) and steel form, making shuttering fully leak proof, placing of reinforcement cage in
position, mixing the aggregates with mixer machine, casting in steel forms, compacting by
Mechanical vibrators and tapered rods and curing for 28 days etc all complete as per direction
of the Engineer in charge (Excluding the cost of reinforcements and its fabrication) etc. all
complete as per direction of the E-I-C. In roof slab of all types, cantilever slab and drop panels
(excluding floor slab of ground floor at plinth level). Ground Floor
1)
39.210
2)
39.210
Reinforced cement concrete works (1:1.5:3) to give a minimum Cylinder strength of 250 cum
Kg/cm2 concrete from a machine mixed typical batch with fresh Portland cement, best quality
coarse sand (minimum FM 2.3) and 20mm down graded crushed stone chips (Preferably
stone chips from Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper
sieves, cleaning and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14
BWG) and steel form, making shuttering fully leak proof, placing of reinforcement cage in
position, mixing the aggregates with mixer machine, casting in steel forms, compacting by
Mechanical vibrators and tapered rods and curing for 28 days etc all complete as per direction
of the Engineer in charge (Excluding the cost of reinforcements and its fabrication) etc. all
complete as per direction of the E-I C. In roof slab of all types, cantilever slab and drop panels
(excluding floor slab of ground floor at plinth level). Add for each additional floor upto 5th floor
1)
114.061
2)
114.061
13 of 185
Quoted Rate
Total
271.902
78.420
228.122
In Figure
(Tk)
In Word
(Tk)
Item
No.
47
48
49
Quantity
Description of Item
Unit
Break up
Reinforced cement concrete works (1:1.5:3) to give a minimum Cylinder strength of 250 cum
Kg/cm2 concrete from a machine mixed typical batch with fresh Portland cement, best quality
coarse sand (minimum FM 2.3) and 20mm down graded crushed stone chips (Preferably
stone chips from Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper
sieves, cleaning and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14
BWG) and steel form, making shuttering fully leak proof, placing ofreinforcement cage in
position, mixing the aggregates with mixer machine, casting in steel forms, compacting by
Mechanical vibrators and tapered rods and curing for 28 days etc all complete as per direction
of the Engineer in charge (Excluding the cost of reinforcements and its fabrication) etc. all
complete as per direction of the E-I-C. In Stair case slab and step Ground Floor
1)
5.200
2)
5.200
Reinforced cement concrete works (1:1.5:3) to give a minimum Cylinder strength of 250 cum
Kg/cm2 concrete from a machine mixed typical batch with fresh Portland cement, best quality
coarse sand (minimum FM 2.3) and 20mm down graded crushed stone chips (Preferably
stone chips from Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper
sieves, cleaning and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14
BWG) and steel form, making shuttering fully leak proof, placing of reinforcement cage in
position, mixing the aggregates with mixer machine, casting in steel forms, compacting by
Mechanical vibrators and tapered rods and curing for 28 days etc all complete as per direction
of the Engineer in charge (Excluding the cost of reinforcements and its fabrication) etc. all
complete as per direction of the E-I-C. In Stair case slab and step Add for each additional
floor upto 5th floor
1)
9.160
2)
9.160
Reinforced cement concrete works (1:2:4) to give a minimum Cylinder strength of 210kg/cm2 cum
concrete from a machine mixed typical batch with fresh cement, best quality coarse sand
(minimum FM 2.5 and 20mm down graded crushed stone chips (Preferably stone chips from
Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper sieves, cleaning
and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14 BWG) and steel
form, making shuttering fully leak proof, placing of reinforcement cage in position, mixing the
aggregates with mixer machine, casting in steel forms, compacting by Mechanical vibrators
and tapered rods and curing for 28 days etc. all complete as per direction of the E-I-C
(Excluding the cost of reinforcements and its fabrication) etc. all complete as per direction of
the E-I-C. In individual and continuous footing of column, raft and floor slab at plinth level.
1)
56.400
2)
56.400
14 of 185
Quoted Rate
Total
10.400
18.320
112.800
In Figure
(Tk)
In Word
(Tk)
Item
No.
50
51
52
53
54
Quantity
Description of Item
Unit
Break up
Reinforced cement concrete works (1:2:4) to give a minimum Cylinder strength of 210kg/cm2 cum
concrete from a machine mixed typical batch with fresh cement, best quality coarse sand
(minimum FM 2.5 and 20mm down graded crushed stone chips (Preferably stone chips from
Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper sieves, cleaning
and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14 BWG) and steel
form, making shuttering fully leak proof, placing of reinforcement cage in position, mixing the
aggregates with mixer machine, casting in steel forms, compacting by Mechanical vibrators
and tapered rods and curing for 28 days etc. all complete as per direction of the E-I-C
(Excluding the cost of reinforcements and its fabrication) etc. all complete as per direction of
the E-I-C.In Tie Beam and lintel :Add for each additional floor up to 5th Floor
1)
24.090
2)
24.090
1)
35.720
2)
35.720
Supply of First Aid box with standard contents ( sterile gauze, adhesive tape, adhesive
bandages in several sizes, antiseptic wipes-Detol, Savlon,Haxasol,soap, antibiotic cream,
scissors, safety pins, thermometer, plastic gloves (at least 2 pairs), flashlight, Water purifier
tablet, Common disaster recovery medicines.) etas per direction of E.I.C
1)
1.000
2)
1.000
Tree Plantation around the shelter and road including maintenance for 2 years as required each
and as per direction the E-I-C. (Coconut,mango,Jacfrout to be planted. The payment is to be
made only when tree are fully grown)
1)
150.000
2)
150.000
Turfing on approach embankment Top & slope, building compound with good quality turf sqm
supplied by the contractor of not less than 225 mm x 225 mm in dimension including leveling,
dressing, placing, anchoring turf with pegs, and watering till grass is fully grown, etc. all
complete as per direction of the Engineer-in-Charge. (Payment to be made only when grass is
fully grown)
1)
205.000
2)
205.000
no
15 of 185
Quoted Rate
Total
48.180
71.440
2.000
300.000
410.000
In Figure
(Tk)
In Word
(Tk)
Item
No.
55
56
Quantity
Description of Item
Unit
Break up
Anti-Salinity and Damp Profooing Admixture for 12mm thick Plastering Work in proportion sqm
(1:6) on new surface: Supplying and applying specified type of chemicals such as Desalt-S01
and Foam-Lub or equivalent admixture, confirming the current chemical specification
requirements like physical properties, uniformity & equivalence in composition etc. for
treatment of anti-salinity, water & damp proofing, getting high work-abilities, better
compatibility, vibration tolerance, void & porosity reducing, partially auto curing, etc. at inside,
outside brick wall and concrete faces. Prepare a mixture with the proportion of 1 liter DesaltS01, 10 liter Water and 25ml or 1 div Catalyst. Cleaning the surface properly and apply one
coat of Desalt-S01 mixture with a jute brush or spray over the exposed concrete or brick
surface (before plaster). Use the mixture within 2 hours of preparation. After that, prepare
sand-cement mortar for plastering work using admixture as Foam-lub 250ml with 50kg
cement. Initially 250ml Foam-lub for 1bag cement is to be mixed with required amount of
water which will be used in preparation of sand cement mortar or doges mentioned in the
manufacturers brochures and strictly following the recommendation and instruction, providing
safety provision in all respect etc. all complete as per direction of the E-I-C. (Excluding cost of
Plastering Work).
1)
184.875
2)
184.875
Anti-Salinity and Damp Profooing Admixture for 6mm thick Plastering Work in proportion (1:4) sqm
on new surface: Supplying and applying specified type of chemicals such as Desalt-S01 and
Foam-Lub or equivalent admixture, confirming the current chemical specification
requirements like physical properties, uniformity & equivalence in composition etc. for
treatment of anti-salinity, water & damp proofing, getting high work-abilities, better
compatibility, vibration tolerance, void & porosity reducing, partially auto curing, etc. at inside,
outside brick wall and concrete faces. Prepare a mixture with proportion of 1 liter Desalt-S01,
10 liter Water and 25ml or 1 div Catalyst. Cleaning the surface properly and apply one coat of
Desalt-S01 mixture with a jute brush or spray over the exposed concrete or brick surface
(before plaster). Use the mixture within 2 hours of preparation. After that, prepare sandcement mortar for plastering work using admixture as Foam-lub 250ml with 50kg cement.
Initially 250ml Foam-lub for 1bag cement is to be mixed with required amount of water which
will be used in preparation of sand cement mortar or doges mentioned in the manufacturers
brochures and strictly following the recommendation and instruction, providing safety
provision in all respect etc. all complete as per direction of the E-I-C. (Excluding cost of
Plastering Work).
1)
1,905.955
2)
1,905.955
16 of 185
Quoted Rate
Total
369.750
3,811.910
In Figure
(Tk)
In Word
(Tk)
Item
No.
57
58
59
60
Quantity
Description of Item
Unit
Break up
Anti-Salinity and Damp Profooing Admixture for 12mm thick Plastering Work in proportion
sqm
(1:4) on new surface: Supplying and applying specified type of chemicals such as Desalt-S01
and Foam-Lub or equivalent admixture, confirming the current chemical specification
requirements like physical properties, uniformity & equivalence in composition etc. for
treatment of anti-salinity, water & damp proofing, getting high work-abilities, better
compatibility, vibration tolerance, void & porosity reducing, partially auto curing, etc. at inside,
outside brick wall and concrete faces. Prepare a mixture with the proportion of 1 liter DesaltS01, 10 liter Water and 25ml or 1 div Catalyst. Cleaning the surface properly and apply one
coat of Desalt-S01 mixture with a jute brush or spray over the exposed concrete or brick
surface (before plaster). Use the mixture within 2 hours of preparation. After that, prepare
sand-cement mortar for plastering work using admixture as Foam-lub 250ml with 50kg
cement. Initially 250ml Foam-lub for 1bag cement is to be mixed with required amount of
water which will be used in preparation of sand cement mortar or doges mentioned in the
manufacturers brochures and strictly following the recommendation and instruction, providing
safety provision in all respect etc. all complete as per direction of the E-I-C. (Excluding cost of
Plastering Work).
1)
40.134
2)
40.134
Clearing by removal and disposal at a safe distance of everything above ground level which
shall include trees, stumps, logs, bush, undergrowth grass, crops, loose vegetable, structures,
etc. all complete as per instruction of the E-I-C.
1)
1.000
2)
1.000
Welding at the splicing point of main reinforcement at 3 points (each point being 25mm in each
length) and each alternate contact point of spiral binder tie rod with the main vertical
reinforcement of the bored piles using electrodes including the cost of all materials, labours,
tools and equipment, the cost of power, etc. all complete as per drawings, specifications and
directions of the Engineer. For spiral spot welding,(each alternate contact point of spiral
binder tie rod with the main vertical reinforcement)
1)
57,120.000
2)
171,360.000
Welding at the splicing point of main reinforcement at 3 points (each point being 25mm in each
length) and each alternate contact point of spiral binder tie rod with the main vertical
reinforcement of the bored piles using electrodes including the cost of all materials, labours,
tools and equipment, the cost of power, etc. all complete as per drawings, specifications and
directions of the Engineer. For lap welding of main reinforcement,3points (each point)
1)
1,120.000
2)
1,680.000
LS
17 of 185
Quoted Rate
Total
80.268
2.000
228,480.000
2,800.000
In Figure
(Tk)
In Word
(Tk)
Quantity
Item
No.
61
Description of Item
Unit
Boring and casting of RCC cast-in-situ piles up to the required depth and
cum
diameter with temporary steel casing in all types of soils including 2-chamber slurry tank,
drilling"Boring and casting of RCC cast-in-situ piles up to the required depth and diameter with
temporary steel casing in all types of soils including 2-chamber slurry tank, drilling with
bentonite circulation (Dry Bentonite powder of liquid limit of minimum 350 shall be mixed with
water @ minimum 4% by weight to make the fresh drilling fluid of viscosity between 32-50
seconds and density less than 1.1gm/cc). Washing bore hole with bentonite slurry (until the
slurry from bore hole bottom have density less than 1.15gm/cc and sand less than 4%)
placing of reinforcement and placing concrete by tremie pipe with ordinary Portland cement,
sand (minimum FM 2.50) and 19mm down graded crushed stone chips , (LAA value not
exceeding 30) to result minimum ultimate cylinder crushing strength of 250 kg/cm2 at 28 days
(suggested minimum mix proportion 1:1.5:3) with allowable slump of 150mm to 200mm (using
necessary admixture : ASTM C494/C494M and additional cement) including cost of all
materials, labour, equipment and all incidental charges but excluding the cost of
reinforcement and its fabrication, etc. all complete as per design, drawing, specifications and
direction of the Engineer. Additional quantity of cement be added, if required to attain the
aforementioned concrete strength, by the contractor at his own costs.(Boring m ethod shall be
selected as set in the drawing). Concreting (with water reducing Admixture)
Break up
1)
351.568
2)
531.440
Supplying, fitting and fixing, Bangladesh pattern BISF Standard simple type Porcelain Long each
Pan (Model-323, size-520x290x260mm) or equivalent simple type of vitreous China with
Siphon and preparing the base of pan with cement concrete and wire net or rods including
making holes in walls and floors wherever required and mending good the damages,
supplying Porcelain lowdown with master Siphon with Low down cover and all fittings, fitting
fixing the same in position with C.I. brackets including supplying best quality 38mm dia PVC
flush pipe with brass coupling (not exceeding 1.80m in length), 12mm dia plastic connection
pipe with brass coupling, 12mm dia brass stop cock, 12mm dia ball cock and pulling chain
etc. all complete as per direction of the E-I-C. White [BISF STANDARD]
(520mmx290mmx260mm)
1)
12.000
2)
12.000
Supplying, fitting and fixing "BISF STANDARD" glazed vitreous Wash Hand Basin (Model- each
213, size-450x405x180mm, Bowl size-375x275x136mm) including fitting fixing the same in
position with heavy type C.I. brackets, 44mm dia PVC waste water pipe with brass coupling
(not exceeding 750mm in length), 12mm dia plastic connection pipe with brass coupling,
12mm dia brass stop cock, 12mm dia C.P. pillar cock, 30mm dia C.P. Basin waste with chain
plug including making holes in walls and floors and fitting with royal plug, screws and mending
good the damages etc. all complete as per direction of the E-I-C. White "BISF STANDARD
6.000
2)
6.000
Quoted Rate
Total
883.008
63
18 of 185
24.000
12.000
In Figure
(Tk)
In Word
(Tk)
Item
No.
64
65
66
67
68
69
70
71
Quantity
Description of Item
Unit
Supplying, fitting and fixing GI pipe confirming to the standard BS-1387 & BDS-1031, having
chemical composition (in%) Carbon 0.17-0.25, Manganese 0.95-1.20, Sulphur 0.060 max,
Phosphorous 0.060 max, Tensile properties: minimum Yield Strengh 188 MPa, minimum
Tensile Strength 313 MPa and marking for a) Manufacturer; b) Materials; c) Wall thickness; d)
Nomal outside dia; e) Intended use etc. on the body of the pipe as per British standard BS729 having 80 micron galvanization and hydrostatic test pressure 50kg/cm2 (710 psi) with all
general special fittings such as bends, elbows, sockets, reducing sockets, Tees, unions, jamnuts etc. including cutting trenches where necessary and fitting the same with earth duly
rammed and fixing in walls with holder bats and making holes in floors and walls and mending
good the damages etc. all complete in all respects as per direction of the E-I-C. (Pipe
manufactured by National Tubes Limited under Steel & Engineering Corporation, Ministry of
Industries, Government of Bangladesh shall be given priority) 12~15mm dia GI pipe wall
thickness 2.00mm
Break up
1)
44.000
2)
44.000
Supplying, fitting and fixing best quality and heavy type bib cock, and Two in one Bib cock of each
brass or cromium plated or special quality plastic materials made with leak proof and fixing in
position with selected tape etc. all complete as per direction of the E-I-C. 12mm dia Brass Bib
Cock
1)
44.000
2)
44.000
Supplying, fitting and fixing best quality Stop Cock of fully brass or cromium plated materials each
made with leak proof and fixing in position with selected tape etc. all complete as per direction
of the E-I-C. 12mm dia Brass Stop Cock (thread type)
1)
55.000
2)
55.000
Supplying, fitting and fixing Standard Size porcelain soap tray fitted with rowel plug and screw each
including making holes in walls by drill machine and mending good the damages etc. all
complete as per direction of the E-I-C. White (150mmx110mmx40mm size)
1)
14.000
2)
14.000
Supplying, fitting and fixing toilet paper holder fitted with rowel plug and screw including each
making holes in walls by drill machine and mending good the damages etc. all complete as
per direction of the E-I-C. Porcelain toilet paper holder (Superior Quality), Size: 185x115mm,
Model: RAK or Equivalent
1)
11.000
2)
11.000
Supplying, fitting and fixing Glass plate Shelf (600mmx125mm) of 5mm thick glass with fancy each
C.P. brackets, screws and frames fitted with rowel plug and screw including making holes in
walls by drill machine and mending good the damages etc. all complete as per direction of the
E-I-C. Super quality (white)
1)
12.000
2)
12.000
Supplying, fitting and fixing Towel rail with holder fitted with rowel plug and screw including each
making holes in walls by drill machine and mending good the damages etc. all complete as
per direction of the E-I-C. C.P. Towel rail (Size : 600mmx20mm) with C.P. holder (Super
quality)
1)
14.000
2)
14.000
Supplying, fitting and fixing super quality unframed 5mm thick Mirror with hard boards at the each
back with all necessary fittings fitted with rowel plug and screw including making holes in walls
by drill machine and mending good the damages etc. all complete as per direction of the E-IC. Japan made Mirror (Size:450mmx350mm)
1)
12.000
19 of 185
Quoted Rate
Total
88.000
88.000
110.000
28.000
22.000
24.000
28.000
24.000
In Figure
(Tk)
In Word
(Tk)
Item
Description of Item
Unit
No.
71 Supplying, fitting and fixing super quality unframed 5mm thick Mirror with hard boards at the each
back with all necessary fittings fitted with rowel plug and screw including making holes in walls
by drill machine and mending good the damages etc. all complete as per direction of the E-IC. Japan made Mirror (Size:450mmx350mm)
Quantity
Break up
2)
20 of 185
12.000
Quoted Rate
Total
24.000
In Figure
(Tk)
In Word
(Tk)
Item
No.
72
73
74
75
76
77
Quantity
Description of Item
Unit
Supplying, fitting and fixing GI pipe confirming to the standard BS-1387 & BDS-1031, having
chemical composition (in%) Carbon 0.17-0.25, Manganese 0.95-1.20, Sulphur 0.060 max,
Phosphorous 0.060 max, Tensile properties: minimum Yield Strengh 188 MPa, minimum
Tensile Strength 313 MPa and marking for a) Manufacturer; b) Materials; c) Wall thickness; d)
Nomal outside dia; e) Intended use etc. on the body of the pipe as per British standard BS729 having 80 micron galvanization and hydrostatic test pressure 50kg/cm2 (710 psi) with all
general special fittings such as bends, elbows, sockets, reducing sockets, Tees, unions, jamnuts etc. including cutting trenches where necessary and fitting the same with earth duly
rammed and fixing in walls with holder bats and making holes in floors and walls and mending
good the damages etc. all complete in all respects as per direction of the E-I-C. (Pipe
manufactured by National Tubes Limited under Steel & Engineering Corporation, Ministry of
Industries, Government of Bangladesh shall be given priority) 20mm dia GI pipe wall
thickness 2.10~2.2mm
Break up
1)
46.000
2)
46.000
Supplying, fitting and fixing 3.66m long Ventilation pipe with all fittings and specials like 50mm each
plain bends, tees, 50mm dia cowls etc. including gasket with cement joints and mending good
the damages etc. all complete as per direction of the E-I-C. 3.66m long 50mm dia PVC best
quality Ventilation Pipe (B.S. 3505)
1)
8.000
2)
8.000
Supplying, fitting and fixing GI pipe confirming to the standard BS-1387 & BDS-1031, having each
chemical composition (in%) Carbon 0.17-0.25, Manganese 0.95-1.20, Sulphur 0.060 max,
Phosphorous 0.060 max, Tensile properties: minimum Yield Strengh 188 MPa, minimum
Tensile Strength 313 MPa and marking for a) Manufacturer; b) Materials; c) Wall thickness; d)
Nomal outside dia; e) Intended use etc. on the body of the pipe as per British standard BS729 having 80 micron galvanization and hydrostatic test pressure 50kg/cm2 (710 psi) with all
general special fittings such as bends, elbows, sockets, reducing sockets, Tees, unions, jamnuts etc. including cutting trenches where necessary and fitting the same with earth duly
rammed and fixing in walls with holder bats and making holes in floors and walls and mending
good the damages etc. all complete in all respects as per direction of the E-I-C. (Pipe
manufactured by National Tubes Limited under Steel & Engineering Corporation, Ministry of
Industries, Government of Bangladesh shall be given priority) 12~15mm dia GI pipe wall
thickness 2.65mm
1)
116.000
2)
116.000
Supplying, fitting and fixing 100mm dia C.I. Trap (Siphon trap or P trap) including making each
holes in walls and floors and mending good the damages etc. all complete as per direction of
the E-I-C.
1)
16.000
2)
16.000
Supplying different inside dia best quality uPVC C-grade pipe for water supply having specific
gravity 1.35 - 1.45, and other physical, chemical, thermal, fire resistivity properties etc. as per
BSTI approved manufacturer standards or ASTM, BS/ISO/IS standards fitted and fixed in
position with sockets, bends, with all accessories such as Round grating/domed roof grating,
bends, sockets (length: 6 meter each) etc. all complete as per direction of the E-I-C. 12 mm
dia wall thickness 2.8 mm - 3.3 mm
1)
47.000
2)
47.000
Supplying, fitting, fixing and laying 100mm dia best quality PVC "B" class water grade (LIRA /
AZIZ / NATIONAL POLYMER BRAND or equivalent) swerage pipe including necessary fittings
and jointswith high class solution and fixed in position horizontally or vertically with sockets
head and shoes, bends, clamps and nails etc. as required all complete as per direction of the
E-I-C., 100mm dia PVC "B" class sewerage pipe
1)
113.000
21 of 185
Quoted Rate
Total
92.000
16.000
232.000
32.000
94.000
226.000
In Figure
(Tk)
In Word
(Tk)
Item
Description of Item
Unit
No.
77 Supplying, fitting, fixing and laying 100mm dia best quality PVC "B" class water grade (LIRA / m
AZIZ / NATIONAL POLYMER BRAND or equivalent) swerage pipe including necessary fittings
and jointswith high class solution and fixed in position horizontally or vertically with sockets
head and shoes, bends, clamps and nails etc. as required all complete as per direction of the
E-I-C., 100mm dia PVC "B" class sewerage pipe
Quantity
Break up
2)
22 of 185
113.000
Quoted Rate
Total
226.000
In Figure
(Tk)
In Word
(Tk)
Item
No.
78
79
80
81
82
Quantity
Description of Item
Unit
Supplying different inside dia best quality ABS pipe for water supply having specific gravity
1.35 - 1.45, and other physical, chemical, thermal, fire resistivity properties etc. as per BSTI
approved manufacturer standards or ASTM, BS/ISO/IS standards fitted and fixed in position
with sockets, bends, with all accessories such as Round grating/domed roof grating, bends,
sockets (length: 6 meter each) etc. all complete as per direction of the E-I-C. 19 mm dia wall
thickness 2.9 mm - 3.4 mm
Break up
1)
23.500
2)
23.500
Supplying different inside dia best quality uPVC special fittings having specific gravity 1.35 each
-1.45, wall thickness 2.7 mm - 3.4 mm, and other physical, chemical, thermal, fire resistivity
properties etc. as per BSTI approved manufacturer standards or ASTM, BS/ISO/IS standards,
fitted and fixed in position with sockets, bends, with all accessories such as Round
grating/domed roof grating bands, sockets etc. all complete as per direction of the E-I-C. 100
mm dia uPVC P or S trap
1)
28.000
2)
28.000
Supplying, fitting and fixing GI pipe confirming to the standard BS-1387 & BDS-1031, having
chemical composition (in%) Carbon 0.17-0.25, Manganese 0.95-1.20, Sulphur 0.060 max,
Phosphorous 0.060 max, Tensile properties: minimum Yield Strengh 188 MPa, minimum
Tensile Strength 313 MPa and marking for a) Manufacturer; b) Materials; c) Wall thickness; d)
Nomal outside dia; e) Intended use etc. on the body of the pipe as per British standard BS729 having 80 micron galvanization and hydrostatic test pressure 50kg/cm2 (710 psi) with all
general special fittings such as bends, elbows, sockets, reducing sockets, Tees, unions, jamnuts etc. including cutting trenches where necessary and fitting the same with earth duly
rammed and fixing in walls with holder bats and making holes in floors and walls and mending
good the damages etc. all complete in all respects as per direction of the E-I-C. (Pipe
manufactured by National Tubes Limited under Steel & Engineering Corporation, Ministry of
Industries, Government of Bangladesh shall be given priority) 25mm dia GI pipe wall
thickness 2.65mm
1)
83.600
2)
83.600
Construction and placing of R.C.C inspection pit cover (100 mm thick RCC slab) in (1:2:4) (of each
item no-5.05.01.01) with 1% reinforcement (of item no-5.06.01.01) excluding M.H cover with
locking/ unlocking arrangement including necessary earth work, side filling, shuttering, curing,
cement plaster (1:4) (of item no-5.12.01) with neat finishing on edges and top etc. all
complete and as per direction of the E-I-C. 900 x 900 x 75 mm R.C.C pit cover
1)
7.000
2)
7.000
Construction of Septic Tank with brick masonry works in main and partition walls in cement each
mortar (1:6) as per approved plan over a single layer brick flat soling and 150mm thick
cement concrete flooring (1:2:4), in/c 20mm thick cement plaster (1:4) to inside of walls with
neat cement finishing, 25mm thick patent stone (1:2:4) flooring with neat cement finishing
including supplying fitting and fixing of two RCC Tees and providing 450mm dia water sealed
heavy type C.I. M.H. cover with necessary locking arrangements, 100mm thick RCC (1:2:4)
top slab with minimum 1% reinforcement including centering, shuttering, fabricating, casting,
curing etc. complete upto required depth. The item is inclusive of necessary earth work in
excavation and shoring, bailing out water and side filling including the cost of all materials,
operations and incidental charges etc. all complete as per the approved plan and direction of
the E-I-C. For 200 users with 3 manhole covers.
1)
1.000
23 of 185
Quoted Rate
Total
47.000
56.000
167.200
14.000
2.000
In Figure
(Tk)
In Word
(Tk)
Item
Description of Item
Unit
No.
82 Construction of Septic Tank with brick masonry works in main and partition walls in cement each
mortar (1:6) as per approved plan over a single layer brick flat soling and 150mm thick
cement concrete flooring (1:2:4), in/c 20mm thick cement plaster (1:4) to inside of walls with
neat cement finishing, 25mm thick patent stone (1:2:4) flooring with neat cement finishing
including supplying fitting and fixing of two RCC Tees and providing 450mm dia water sealed
heavy type C.I. M.H. cover with necessary locking arrangements, 100mm thick RCC (1:2:4)
top slab with minimum 1% reinforcement including centering, shuttering, fabricating, casting,
curing etc. complete upto required depth. The item is inclusive of necessary earth work in
excavation and shoring, bailing out water and side filling including the cost of all materials,
operations and incidental charges etc. all complete as per the approved plan and direction of
the E-I-C. For 200 users with 3 manhole covers.
Quantity
Break up
2)
24 of 185
1.000
Quoted Rate
Total2.000
In Figure
(Tk)
In Word
(Tk)
Quantity
Item
No.
83
84
85
86
Description of Item
(7.32A) Supplying, fitting and fixing best quality G.M. Pit valve., 75mm dia peet valve
Unit
each
Break up
1)
10.000
2)
10.000
Construction of masonry inspection pit with 250 mm thick brick work in cement mortar (1:4)
each
including necessary earth work side filling and one layer brick flat soling, 75 mm thick (1:3:6)
base concrete for making invert channel and 12 mm thick (1:2) cement plaster with neat
finishing up to a depth of 700 mm etc. all complete and as per direction of the E-I-C (minimum
sand F.M. 1.2). Clear 520x525 mm and depth 675 to 825 mm average 750 mm for single 225
mm dia R.C.Cofpipes
mm
PVC pipe
Construction
soakand
well400
with
250mm
thick solid brick work (1:6) and 250mm honey comb each
brick work (1:6) as per design over RCC (1:2:4) well curb with 1.5% reinforcement upto the
depth as per drawing with 100mm dia water sealed heavy type C.I. manhole cover with all
locking arrangements, filling the well upto the required depth with graded khoa and sand
including supplying and fabricating MS Rod, casting, curing etc. The item is inclusive of
necessary earth work in excavation, side filling and bailing out water etc. all complete as per
drawing, design and direction of the E-I-C. For 200 users
1)
10.000
2)
10.000
1)
1.000
2)
1.000
Supplying and installation of Manhole cover on valve chamber including carrying and each
supplying of all materials, 500mm dia Manhole cover, fitting, fixing, all complete as per
direction of the E-I-C.
1)
1.000
2)
1.000
Supplying fan hook of 16mm dia MS rod (one meter long) having rounded hook at the middle each
of bar in proper size i/c. fabrication and fixing in position in all floors etc. all complete as per
direction of the E-I-C.
1)
34.000
2)
34.000
Supplying, fitting and fixing main/sub-main switches with fuse on live side and neutral line on each
concealed iron frame (Bangladeshi made of prior approved quality) or equivalent as per
specification and direction of the E-I-C. 500 Volts ICTP 200 amps
1)
16.000
2)
16.000
ELECTRICAL WIRING Concealed Conduit wiring: Concealed Conduit wiring for the following point
Points Looping at the Switch board with earth terminal including Circuit wiring with 1c-2x1.5
Sq.mm PVC insulated stranded cable (BYA) & 1.5 mm rm (green) PVC insulated stranded
ECC wire (BYA) through PVC conduit (Aziz or equivalent) of 25 mm inner dia wall thickness
1.5 mm, 18 SWG GP Sheet, switch board & Pull box with 3mm thick ebonite sheet cover,
brass contact, ceiling rose, fixing materials & all other accessories as required including
mending
the damages: Manufacturer of cable Eastern/ BRB/Citizen/Paradise/Poly
cable/Super sign/EVANA or equivalent according to the specification & direction of the
Engineer- in-charge. Light point/Exhaust/Wall bracket fan point
1)
190.000
2)
190.000
Quoted Rate
Total
20.000
20.000
2.000
2.000
88
89
25 of 185
68.000
32.000
380.000
In Figure
(Tk)
In Word
(Tk)
Item
No.
90
91
92
93
94
95
Quantity
Description of Item
Unit
Break up
ELECTRICAL WIRING Concealed Conduit wiring: Concealed Conduit wiring for the following point
Points Looping at the Switch board with earth terminal including Circuit wiring with 1c-2x1.5
Sq.mm PVC insulated stranded cable (BYA) & 1.5 mm rm (green) PVC insulated stranded
ECC wire (BYA) through PVC conduit (Aziz or equivalent) of 25 mm inner dia wall thickness
1.5 mm, 18 SWG GP Sheet, switch board & Pull box with 3mm thick ebonite sheet cover,
brass contact, ceiling rose, fixing materials & all other accessories as required including
mending
the damages: Manufacturer of cable Eastern/ BRB/Citizen/Paradise/Poly
cable/Super sign/EVANA or equivalent according to the specification & direction of the
Engineer- in-charge. Ceiling fan point
1)
34.000
2)
34.000
Supplying, fitting and fixing Distribution/Sub-Distribution board made of 18 SWG steel sheet sqm
metal enclosed with double cover, gray hammer painted on outside and enamel paint on
inside on rust proof prime coat with hinged front door with lock and key arrangement for half
concealed mounted board having knock out for conduit entry and exit for 415/230V TP&N/
SP&N operations. The board shall have solid neutral and earth copper bus bar and also
required size off 3 phase copper bus bars covering transperent fiber glass. All bars shall have
required number of holes of 5mm for cable connections etc. all complete as per drawing,
design and direction of E-I-C.
1)
2.000
2)
2.000
Earthing the electrical installation with 38mm dia GI pipe (earth electrode) having 6mm dia set
holes across the dia at 1.0m interval securedly bonded with 2 SWG HDBC earth lead with
washer, nuts, bolts etc. sunk upto under-mentioned depth and protection of earth lead by
12mm dia GI pipe upto plinth level run at a depth of 6.6m below G.L upto main board to be
earthed in/c necessary connecting copper sockets, bolts, nuts, in/c additional vertical run of
12mm dia GI pipe upto G.L. from 6.6m depth with blind socket for water pouring facility etc. all
complete for maintaining earth resistance within 1 ohm. Depth of main electrode at 35-40m
1)
1.000
2)
1.000
Supplying, fitting and fixing 250V capacitor type ceiling fan complete with concealed each
condensers, canopies and required length of rods, ceiling roses, wooden round blocks,
regulator, switches and required length of flexible wire etc. all complete as per drawings and
directions of the E-I-C. 1.422m sweep (best quality)
1)
40.000
2)
40.000
ELECTRICAL WIRING Concealed Conduit wiring: Concealed Conduit wiring for the following point
Points Looping at the Switch board with earth terminal including Circuit wiring with 1c-2x1.5
Sq.mm PVC insulated stranded cable (BYA) & 1.5 mm rm (green) PVC insulated stranded
ECC wire (BYA) through PVC conduit (Aziz or equivalent) of 25 mm inner dia wall thickness
1.5 mm, 18 SWG GP Sheet, switch board & Pull box with 3mm thick ebonite sheet cover,
brass contact, ceiling rose, fixing materials & all other accessories as required including
mending
the damages: Manufacturer of cable Eastern/ BRB/Citizen/Paradise/Poly
cable/Super sign/EVANA or equivalent according to the specification & direction of the
Engineer- in-charge. 2-pin 5 amps socket (outlet)
1)
20.000
2)
20.000
Supplying, fitting and fixing 150mm dia globe light complete with one way tumbler switch for
corridor and porch lighting. The light is to be installed on teak wood board and each lamp
operated by one way switch as per drawings and directions of the E-I-C.
1)
36.000
set
26 of 185
Quoted Rate
Total
68.000
4.000
2.000
80.000
40.000
72.000
In Figure
(Tk)
In Word
(Tk)
Item
Description of Item
Unit
No.
95 Supplying, fitting and fixing 150mm dia globe light complete with one way tumbler switch for set
corridor and porch lighting. The light is to be installed on teak wood board and each lamp
operated by one way switch as per drawings and directions of the E-I-C.
96
Supplying, fitting and fixing metal plated fancy bracket, holder and fancy shade etc. complete. set
The light is to be installed on teak wood board and each lamp operated by one way tumbler
switch as per drawings and directions of the E-I-C.
Quantity
Break up
2)
36.000
1)
12.000
2)
12.000
27 of 185
Quoted Rate
Total
72.000
24.000
In Figure
(Tk)
In Word
(Tk)
Item
No.
97
Quantity
Description of Item
Unit
Break up
Supplying, fitting and fixing water tight bracket light with double concealed reflector, brass set
holder, 25mm dia GI pipe bracket, J type glass shade etc. complete as per drawings and
directions of the E-I-C. Each lamp is to be operated by one way tumbler switch.
1)
14.000
2)
14.000
Supplying, fitting and fixing 1.22m long 40 watt fluorescent tube light with necessary superior set
quality ballast, starter, condenser, holders, 18 SWG sheet steel stove enamel base, etc. all
complete as per drawing and directions of the E-I-C. Each lamp is to be operated by one way
switch. (Eastern or prior approved quality)
1)
26.000
2)
26.000
Supplying, fitting and fixing the following electric lamp for garden/gate/room light and different each
places as per directions of the E-I-C. Energy Savings Lamp (CLF) 9 watt lamps B-22/E-27
CDL
1)
70.000
2)
70.000
100 Providing and fixing 230V, 50Hz, single phase, 10-40 Amps, Electronics Digital energy meter each
(KWH meter) steel body with glass cover on prepared board (Bemco / Citizen / Electro / Hay /
Hosaf / Jamuna / Meghna / Padma / Prime / Solar) meter or equivalent foreign made as per
approved by the E-I-C.
1)
2.000
2)
2.000
101 Providing and fixing 230V, 50Hz, single phase, 10-40 Amps, Electronics Digital energy meter each
(KWH meter) steel body with glass cover on prepared board (Bemco / Citizen / Electro / Hay /
Hosaf / Jamuna / Meghna / Padma / Prime / Solar) meter or equivalent foreign made as per
approved by the E-I-C.
1)
14.000
2)
14.000
102 Supplying, fitting and fixing switch board which to be concealed in the wall and to be made by each
22 SWG thick steel sheet metal and ebonite sheets for fixing the piano type hand regulators,
switches, etc on switch board all complete as per direction of E.I.C, 220mm x200mmx 50mm
(SB-05)
1)
8.000
2)
8.000
103 Supplying, fitting and fixing switch board which to be concealed in the wall and to be made by each
22 SWG thick steel sheet metal and ebonite sheets for fixing the piano type hand regulators,
switches, etc on switch board all complete as per direction of E.I.C, 190mm x200mmx 50mm
(SB-06)
1)
10.000
2)
10.000
104 Supplying, fitting and fixing switch board which to be concealed in the wall and to be made by each
22 SWG thick steel sheet metal and ebonite sheets for fixing the piano type hand regulators,
switches, etc on switch board all complete as per direction of E.I.C, 80mm x65mmx50mm
(SB-08/SB-09/SB-10/SB-11)
1)
80.000
2)
80.000
105 Supplying, fitting and fixing switch board which to be concealed in the wall and to be made by each
22 SWG thick steel sheet metal and ebonite sheets for fixing the piano type hand regulators,
switches, etc on switch board all complete as per direction of E.I.C, 140mmx65mmx50mm
(SB-04)
1)
16.000
2)
16.000
98
99
28 of 185
Quoted Rate
Total
28.000
52.000
140.000
4.000
28.000
16.000
20.000
160.000
32.000
In Figure
(Tk)
In Word
(Tk)
Item
No.
Quantity
Description of Item
Unit
106 Solar Panel: Supply and complete installation of 170W solar cyclone shelter solution each
comprising of 2 nos 85Wp PV module solar panels, 2 nos 12V, 130 AH (Industrial type)
Battery, 1no. 15A charge controller with all battery, accessories, cable and installation
accessories and 2 sets of module mounting structure for running 14+(6 spare) nos.
Fluorescent Tube Light (7.5 watt each) for 4 hours per day with 3 day autonomy (16 hours)for
extreme weather condition. Recommended Manufacturer of Solar Panel is
RAHIMAFROOZ/GRAMEEN SHAKTI or equivalent, but manufacturer of battery must be
RAHIMAFROOZ/GRAMEEN SHAKTI or equivalent. The system to be designed with 3 days
battery backup and it should have built-in automatic voltage regulator (AVR), overload
protection, low voltage protection, automatic charge controller, short circuit protection fuse
and LED control display. The item should include solar panel, battery, inverter and casing,
specially designed fulerlight and charge controller. Work also includes wiring, switch boxes
and light fixture. The system should be covered under 20 years warranty for solar panel, 3
years warranty for battery, inverter, charger and misc. items and 1 year free service warranty
at site. All works to be done as per drawing, specification and as per direction of E-I-C.
Break up
1)
1.000
2)
1.000
1)
100.000
2)
100.000
1)
100.000
2)
100.000
1)
104.000
2)
104.000
1)
96.000
Quoted Rate
Total
2.000
108 Boring by using 100mm dia cutter and 38mm dia GI Pipe and other equipment capable of
drilling up to a depth of 500m by water jet system through all sorts of strata, protection of
caving by supplying necessary casing pipe, collection of soil samples at every 3m interval and
at every change of strata and preserve them for analysis, withdrawal of boring pipes & casing
pipes etc. all complete as per specification and direction of the E-I-C. From 50m to 100m =
50m
109 Boring by using 100mm dia cutter and 38mm dia GI Pipe and other equipment capable of
drilling up to a depth of 500m by water jet system through all sorts of strata, protection of
caving by supplying necessary casing pipe, collection of soil samples at every 3m interval and
at every change of strata and preserve them for analysis, withdrawal of boring pipes & casing
pipes etc. all complete as per specification and direction of the E-I-C. From 100m to 152m =
52m
110 Boring by using 100mm dia cutter and 38mm dia GI Pipe and other equipment capable of
drilling up to a depth of 500m by water jet system through all sorts of strata, protection of
caving by supplying necessary casing pipe, collection of soil samples at every 3m interval and
at every change of strata and preserve them for analysis, withdrawal of boring pipes & casing
pipes etc. all complete as per specification and direction of the E-I-C. From 152m to 200m =
48m
29 of 185
200.000
200.000
208.000
192.000
In Figure
(Tk)
In Word
(Tk)
Item
Description of Item
Unit
110
No. Boring by using 100mm dia cutter and 38mm dia GI Pipe and other equipment capable of m
drilling up to a depth of 500m by water jet system through all sorts of strata, protection of
caving by supplying necessary casing pipe, collection of soil samples at every 3m interval and
at every change of strata and preserve them for analysis, withdrawal of boring pipes & casing
pipes etc. all complete as per specification and direction of the E-I-C. From 152m to 200m =
48m
Quantity
Break up
2)
30 of 185
96.000
Quoted Rate
192.000 In Figure
Total
(Tk)
In Word
(Tk)
Item
No.
Quantity
Description of Item
111 Boring by using 100mm dia cutter and 38mm dia GI Pipe and other equipment capable of
drilling up to a depth of 500m by water jet system through all sorts of strata, protection of
caving by supplying necessary casing pipe, collection of soil samples at every 3m interval and
at every change of strata and preserve them for analysis, withdrawal of boring pipes & casing
pipes etc. all complete as per specification and direction of the E-I-C. From 200m to 250m =
50m
Unit
m
Break up
1)
100.000
2)
100.000
112 Boring by using 100mm dia cutter and 38mm dia GI Pipe and other equipment capable of each
drilling up to a depth of 500m by water jet system through all sorts of strata, protection of
caving by supplying necessary casing pipe, collection of soil samples at every 3m interval and
at every change of strata and preserve them for analysis, withdrawal of boring pipes & casing
pipes etc. all complete as per specification and direction of the E-I-C. Beyond 250m
1)
500.000
2)
500.000
113 Supplying and lowering 38mm dia water grade PVC pipe having wall thickness 2.5m to
3.0mm (D Class Aziz pipe/equivalent), PVC sand trap of length 3.0m with cap, PVC strainer
of desired slot installing at the middle of the most suitable water bearing strata. 38mm dia GI
pipe of best quality of length 1.52m with MS welded flat bar on each side to prevent from
rotation up to the desired depth, fitting fixing the hand pump No. 6 etc. including the cost of
solvent cement, socket adapter, filling medium sand up to 18.0m above strainer and the
remaining portion with available soil from boring etc. all complete as per standard
specification and direction of the E-I-C Hand pump No. 6 complete set (EPL/RFL)
(Medium)/equivalent brand)
1)
2.000
2)
2.000
114 Supplying and lowering 38mm dia water grade PVC pipe having wall thickness 2.5m to
3.0mm (D Class Aziz pipe/equivalent), PVC sand trap of length 3.0m with cap, PVC strainer
of desired slot installing at the middle of the most suitable water bearing strata. 38mm dia GI
pipe of best quality of length 1.52m with MS welded flat bar on each side to prevent from
rotation up to the desired depth, fitting fixing the hand pump No. 6 etc. including the cost of
solvent cement, socket adapter, filling medium sand up to 18.0m above strainer and the
remaining portion with available soil from boring etc. all complete as per standard
specification and direction of the E-I-C 38mm dia GI pipe 2.9mm thick (National
Tubes/equivalent)
1)
50.000
2)
50.000
115 Supplying and lowering 38mm dia water grade PVC pipe having wall thickness 2.5m to
3.0mm (D Class Aziz pipe/equivalent), PVC sand trap of length 3.0m with cap, PVC strainer
of desired slot installing at the middle of the most suitable water bearing strata. 38mm dia GI
pipe of best quality of length 1.52m with MS welded flat bar on each side to prevent from
rotation up to the desired depth, fitting fixing the hand pump No. 6 etc. including the cost of
solvent cement, socket adapter, filling medium sand up to 18.0m above strainer and the
remaining portion with available soil from boring etc. all complete as per standard
specification and direction of the E-I-C 38mm dia water graded PVC pipe having thickness
2.5-3.00mm (D class Aziz brand/equivalent) pipe sand trap
1)
400.000
31 of 185
Quoted Rate
Total
200.000
1,000.000
4.000
100.000
800.000
In Figure
(Tk)
In Word
(Tk)
Item
Description of Item
Unit
No.
115 Supplying and lowering 38mm dia water grade PVC pipe having wall thickness 2.5m to m
3.0mm (D Class Aziz pipe/equivalent), PVC sand trap of length 3.0m with cap, PVC strainer
of desired slot installing at the middle of the most suitable water bearing strata. 38mm dia GI
pipe of best quality of length 1.52m with MS welded flat bar on each side to prevent from
rotation up to the desired depth, fitting fixing the hand pump No. 6 etc. including the cost of
solvent cement, socket adapter, filling medium sand up to 18.0m above strainer and the
remaining portion with available soil from boring etc. all complete as per standard
specification and direction of the E-I-C 38mm dia water graded PVC pipe having thickness
2.5-3.00mm (D class Aziz brand/equivalent) pipe sand trap
Quantity
Break up
2)
32 of 185
400.000
Quoted Rate
Total
800.000
In Figure
(Tk)
In Word
(Tk)
Item
No.
Quantity
Description of Item
116 Supplying and lowering 38mm dia water grade PVC pipe having wall thickness 2.5m to
3.0mm (D Class Aziz pipe/equivalent), PVC sand trap of length 3.0m with cap, PVC strainer
of desired slot installing at the middle of the most suitable water bearing strata. 38mm dia GI
pipe of best quality of length 1.52m with MS welded flat bar on each side to prevent from
rotation up to the desired depth, fitting fixing the hand pump No. 6 etc. including the cost of
solvent cement, socket adapter, filling medium sand up to 18.0m above strainer and the
remaining portion with available soil from boring etc. all complete as per standard
specification and direction of the E-I-C 38mm dia water graded PVC strainer having thickness
2.5 3.0mm (D class Aziz brand/equivalent) of recommended slot size
Unit
m
Break up
1)
24.400
2)
24.400
117 Supplying and lowering 38mm dia water grade PVC pipe having wall thickness 2.5m to each
3.0mm (D Class Aziz pipe/equivalent), PVC sand trap of length 3.0m with cap, PVC strainer
of desired slot installing at the middle of the most suitable water bearing strata. 38mm dia GI
pipe of best quality of length 1.52m with MS welded flat bar on each side to prevent from
rotation up to the desired depth, fitting fixing the hand pump No. 6 etc. including the cost of
solvent cement, socket adapter, filling medium sand up to 18.0m above strainer and the
remaining portion with available soil from boring etc. all complete as per standard
specification and direction of the E-I-C Best quality 38mm dia PVC cap
1)
2.000
2)
2.000
118 Furnishing design of the production well by testing of water and soil samples collected from each
the observation well in/c test for 'Arsenic' etc. all complete as per direction of the E-I-c.
(excluding the cost of actual fees for testing which will be paid by to the contractor separately
by the department)
1)
2.000
2)
2.000
119 Construction of platform of size 1.4mx1.0m as per drawing with 75mm thick Cement Concrete
(1:2:4) over a layer of brick flat soling and providing 125mmx75mm brick band all around in/c
finished with 12mm thick cement plaster (1:4) with neat cement finishing, providing outlet
drain up to 1m long, etc. all complete as per direction of the E-I-C.
1)
2.000
2)
2.000
33 of 185
Quoted Rate
Total
48.800
4.000
4.000
4.000
In Figure
(Tk)
In Word
(Tk)
Item
No.
Quantity
Description of Item
Unit
Break up
Quoted Rate
Total
1)
84.000
2)
84.000
34 of 185
168.000
In Figure
(Tk)
In Word
(Tk)
Item
No.
121
Quantity
Description of Item
Unit
Break up
1)
10.000
2)
10.000
122 "Teacher's Chair: Size 560mmX533mmX 863mm(H): Chair frame will be made of 22mm each
(inner) M.S. pipe (outer diameter 25mm wall thickness 1.5mm) and 25mm X 3mm M.S. Flat
bar.Chair shell to be made with both side finished fiber glass. The chair sample must be
prepared according to design & drawings and to be approved by Executive Engineer, LGED
before production.
1)
22.000
2)
22.000
123 Supplying best quality Secretariat Table (Size: 1.52m x1.07mx0.76m) made of best quality each
well matured, fully seasoned Chittagong Teak wood (timber should be sapless) in/c superior
quality varnishing/French polishing, best quality rexin topping and finishing, etc. all complete
as per design (if provided) and direction of the E-I-C. (This item includes all fittings, fixings
and delivering the furniture at the instructed place).
1)
2.000
2)
2.000
124 Supplying best quality Tea Table of standard size made of best quality well matured, fully each
seasoned jack wood (timber should be sapless) in/c superior quality varnishing/French
polishing and finishing, etc. all complete as per design (if provided) and direction of the E-I-C.
(This item includes all fittings, fixings and delivering the furniture at the instructed place).
1)
2.000
2)
2.000
125 Supplying best quality armed Chair (wooden sit and back) of standard size, made of
each
best quality well matured, fully seasoned jack wood (timber should be sapless) in/c superior
quality varnishing/ French polishing and finishing, etc. all complete as per design (if provided)
and direction of the E-I-C. (This item includes delivering the furniture at the instructed place).
1)
2.000
2)
2.000
126 Steel Almirah: , Manufacturing and supplying of steel almirah of size 6'-0''x3'-0''x2'-3'' made of each
18 BWG M.S sheet at front and two parallel sides and 20 BWG M.S sheet at back side as per
approved design and specifications including the cost of painting with synthetic enamal spray
painting including welding, plane surfacing, denting, points, fitting & fixing with standard lock
with two keys and also lock in the drawers etc all complete as per direction of E/C
1)
4.000
35 of 185
Quoted Rate
Total
20.000
44.000
4.000
4.000
4.000
8.000
In Figure
(Tk)
In Word
(Tk)
Item
Description of Item
Unit
No. Steel Almirah: , Manufacturing and supplying of steel almirah of size 6'-0''x3'-0''x2'-3'' made of each
126
18 BWG M.S sheet at front and two parallel sides and 20 BWG M.S sheet at back side as per
approved design and specifications including the cost of painting with synthetic enamal spray
painting including welding, plane surfacing, denting, points, fitting & fixing with standard lock
with two keys and also lock in the drawers etc all complete as per direction of E/C
Quantity
Break up
2)
36 of 185
4.000
Quoted Rate
Total8.000
In Figure
(Tk)
In Word
(Tk)
Item
No.
Quantity
Description of Item
Unit
Break up
Quoted Rate
Total
each
128 Overall environmental management in addition to compliance to the clauses PCC 2.3
(j) & AppendixA (IEE) to the entire satisfaction of E-I-C.
b) Dust suppression measure to the entire satisfaction of the Engineer.
each
129 Overall environmental management in addition to compliance to the clauses PCC 2.3
(j) & AppendixA (IEE) to the entire satisfaction of E-I-C.
C) Environmental Monitoring.
each
1)
1.000
2)
1)
1.000
2)
1.000
1)
2)
37 of 185
2.000
1.000
In Figure
(Tk)
In Word
(Tk)
OMT
38 of 185
39 of 185
40 of 185
41 of 185
42 of 185
43 of 185
44 of 185
45 of 185
46 of 185
47 of 185
48 of 185
49 of 185
50 of 185
51 of 185
52 of 185
53 of 185
54 of 185
55 of 185
56 of 185
57 of 185
58 of 185
59 of 185
60 of 185
61 of 185
62 of 185
63 of 185
64 of 185
65 of 185
66 of 185
67 of 185
68 of 185
69 of 185
70 of 185
71 of 185
72 of 185
73 of 185
74 of 185
Item
No.
1
Description of Item
Unit
Providing and maintaining fully equipped Semi pucca field office (Appendix 5) with necessary
furniture, Sanitary & Electrical/ power facilities, water supply arrangement, office and survey
equipment for the use of the Engineer and his staff, all complete including removal of
structures and clearing the site on completion of the work. All materials and equipment shall
be the property of the contractor. The contractor shall submit for the approval of the Engineer
the detailed plans and drawings of the field office building. Minimum: 84.00 sqm
LS
Supplying Sign Board at site of 1.5mx1.0m size in plain CI sheet; painting, writing,
erecting & fixing with bamboo including all complete as per direction of Engineer-in-Charge.
LS
Break up
1)
Quoted Rate
In Figure
In Word
(Tk)
1.000
100,000.00
Total
2)
1)
4.000
5,000.00
2)
Conducting static load test as per ASTM D1143 or equivalent standard for the cast in situ/ each
precast pile providing required scaffolding, bracing, jacks, pressure test gauge, loading
unloading, arranging other necessary plants and equipment including staging,
mobilizaConducting static load test as per ASTM D1143 or equivalent standard for the cast in
situ/ precast pile providing required scaffolding, bracing, jacks, pressure test gauge, loading
unloading, arranging other necessary plants and equipment including staging, mobilization,
demobilization, hire charge, gunny bags, sand and filling sacs/gunny bags for loading /
concrete Block or equivalent, record readings and preparation of results in standard forms
and other incidental charges as per standard practice and procedures including submission of
load test report, furnishing all graph and chart etc. complete in all respects approved and
accepted by the Engineer (Minimum two cyclic loading). Before commencing load test,
Contractor shall submit method statement for conducting load test to the Engineer for
approval. However, Engineers approval shall not relieve the Contractor of his responsibilities
and obligations under Contract. using sand filled gunny bag Above 75 ton and up to 125 ton
1)
75 of 185
2.000
4.000
160358.72
(Tk)
Item
Description of Item
Unit
No.
3 Conducting static load test as per ASTM D1143 or equivalent standard for the cast in situ/ each
precast pile providing required scaffolding, bracing, jacks, pressure test gauge, loading
unloading, arranging other necessary plants and equipment including staging,
mobilizaConducting static load test as per ASTM D1143 or equivalent standard for the cast in
situ/ precast pile providing required scaffolding, bracing, jacks, pressure test gauge, loading
unloading, arranging other necessary plants and equipment including staging, mobilization,
demobilization, hire charge, gunny bags, sand and filling sacs/gunny bags for loading /
concrete Block or equivalent, record readings and preparation of results in standard forms
and other incidental charges as per standard practice and procedures including submission of
load test report, furnishing all graph and chart etc. complete in all respects approved and
accepted by the Engineer (Minimum two cyclic loading). Before commencing load test,
Contractor shall submit method statement for conducting load test to the Engineer for
approval. However, Engineers approval shall not relieve the Contractor of his responsibilities
and obligations under Contract. using sand filled gunny bag Above 75 ton and up to 125 ton
Quantity
Break up
2)
76 of 185
Quoted Rate
Total4.000
In Figure
(Tk)
2.000
160358.72
In Word
(Tk)
Item
No.
4
Quantity
Description of Item
Unit
Boring and casting of RCC cast-in-situ piles up to the required depth and diameter with
temporary steel casing in all types of soils including 2-chamber slurry tank, drilling"Boring and
casting of RCC cast-in-situ piles up to the required depth and diameter with temporary steel
casing in all types of soils including 2-chamber slurry tank, drilling with bentonite circulation
(Dry Bentonite powder of liquid limit of minimum 350 shall be mixed with water @ minimum
4% by weight to make the fresh drilling fluid of viscosity between 32-50 seconds and density
less than 1.1gm/cc). Washing bore hole with bentonite slurry (until the slurry from bore hole
bottom have density less than 1.15gm/cc and sand less than 4%) placing of reinforcement
and placing concrete by tremie pipe with ordinary Portland cement, sand (minimum FM 2.50)
and 19mm down graded crushed stone chips , (LAA value not exceeding 30) to result
minimum ultimate cylinder crushing strength of 250 kg/cm2 at 28 days (suggested minimum
mix proportion 1:1.5:3) with allowable slump of 150mm to 200mm (using necessary admixture
: ASTM C494/C494M and additional cement) including cost of all materials, labour, equipment
and all incidental charges but excluding the cost of reinforcement and its fabrication, etc. all
complete as per design, drawing, specifications and direction o f the Engineer. Additional
quantity of cement be added, if required to attain the aforementioned concrete strength, by
the contractor at his own costs.(Boring m ethod shall be selected as set in the drawing).
BORING PERCUSSION METHOD: Direct Mud Circulation (DMC) 600mm dia
Break up
1)
1,232.000
2)
1,848.000
Integrity test of cast-in-situ/pre-cast pile by placing a small accelerometer on the top of a pile set
while hitting the pile head with a small hammer. The shock wave traveling through the pile
propagate with the velocity of sound in concrete which is 3000-3500 m/s approximately or as
decided by the Engineer, as per approved method. for up to 10 nos piles
1)
3.000
2)
3.000
38mm thick on an average roof top cement concrete screed in proportion (1:1.5:3)
sqm
with 12mm down graded 1st class brick chips/picked chips, cement and sand (minimum FM
1.8) with neat cement finishing on the following day of roof slab casting including mixing
concrete, laying, cost of all materials, labour and transportation to the site, finishin the edges
and corners, curing for the requisite period etc. all complete as per drawing, specification and
direction of the E-I-C
1)
346.184
2)
346.184
Sand filling in foundation trenches and inside plinth with sand (minimum FM 0.80) in 150mm cum
layers in/c leveling, watering and consolidating each layer up to finished level etc. all complete
as per direction of the E-I-C. Dry density after compaction shall not be less than 95% of MDD
(STD).
1)
702.692
2)
819.910
Earth filling inside plinth in 150mm layers with earth available within 90m of the nbuilding site, cum
watering, leveling and consolidating each layer up to finished level, etc. all complete as per
direction of the E-I-C.. Dry density after compaction shall not be less than 90% of MDD
(STD).
1)
154.166
2)
193.010
77 of 185
Quoted Rate
In Figure
In Word
(Tk)
3,080.000
1,791.60
Total
6.000
26,035.36
692.368
507.63
1,522.602
736.30
347.176
289.98
(Tk)
Item
No.
9
10
11
12
13
14
15
16
Quantity
Description of Item
Unit
Break up
Site improvement/earth filling in foundation trenches and plinth with specified soil in/c cum
supplying, carrying, filling by throwing earth in 150mm layers with carted earth carried by truck
or any other means to be supplied at the contractors own cost etc. all complete as per
direction of the E-I-C. (Carried from a distance beyond 200m). Municipal area.
1)
415.350
2)
623.025
Single layer brick flat soling with 1st class or picked bricks, true to level, camber/super cum
elevation and grade including carrying bricks, filling the interstices tightly with sand of
minimum FM 0.80, etc. all complete as per direction of the E-I-C.
1)
634.745
2)
634.745
Mass concrete work in foundation or floor with Portland cement, sand (minimum FM 1.20) cum
and 1st class/picked brick chips 20mm down graded (LAA value not exceeding 40), including
shuttering, mixing by concrete mixer machine, casting, laying compacting and curing for the
requisite period breaking bricks into chips etc. all complete as per direction of the E-IC.
Cylinder crushing strength of concrete should not be less than 105kg/cm2 at 28 days of curing
(suggested mix proportion 1:3:6). Additional quantity of cement to be added if required to
attain the strength at the contractors own cost. Mass concrete in foundation (1:3:6) with
cement, sand and brick chips.
1)
6.926
2)
7.241
Providing single layer polythene sheet (0.18mm thick) weighing one kilogram per 6.5 square sqm
meter in floor or any where in ground floor underneath the cement concrete, etc. all complete
as per specifications and direction of the E-I-C.
1)
532.250
2)
616.890
Brick work with 1st class bricks in cement mortar (1:6) in foundation and plinth, filling the cum
interstices tightly with mortar, raking out joints, cleaning and soaking bricks at least for 24
hours before use, washing of sand, curing for requisite period, etc. all complete as per
direction of the E-I-C. (Minimum FM of sand:1.2)
1)
10.203
2)
10.481
Brick work of 1st class bricks in cement mortar (1:6) in superstructure in/c raking out joints, cum
filling interstices tightly with mortar, cleaning and soaking bricks at least for 24 hours before
use, washing of sand, necessary scaffolding, curing for requisite period, etc. all complete as
per direction of the E-I-C. (Minimum FM of sand:1.2) Ground Floor
1)
7.208
2)
7.208
Supplying and fabrication of M.S High strength deformed bar/ Twisted bar reinforcement of
required size and length for all types of RCC work in/c straightening the rod, removing ruts,
cleaning, cutting, hooking, bending, binding with supply of 22 B.W.G. GI wire, placing in
position, in/c lapping, spacing and securing them in position by concrete blocks (1:1), metal
chairs, etc. complete in/c cost of all materials, labour, local handling incidentals necessary to
complete the work as per specifications, drawings and direction of the E-I-C. (Measurement
will be based on standard weight of 490 lbs/ft3. Chairs, laps and separators will not be
measures for payment. The cost of these remains inclusive in the unit rate) MS Ribbed Weld
able Bar (Deformed Bar) of steel grade RB 400W) with minimum yield stress = 400 MPa &
Elongation 14%
1)
118,572.694
2)
139,426.906
1)
67.340
kg
Brick work of 1st class bricks in cement mortar (1:6) in superstructure in/c raking out joints, cum
filling interstices tightly with mortar, cleaning and soaking bricks at least for 24 hours before
use, washing of sand, necessary scaffolding, curing for requisite period, etc. all complete as
per direction of the E-I-C. (Minimum FM of sand:1.2) Add for each additional floor up to 5th
floor
78 of 185
Quoted Rate
In Figure
In Word
(Tk)
1,038.375
323.21
Total
1,269.490
341.53
14.167
6,784.85
1,149.140
18.61
20.684
5,854.36
14.416
6,118.85
257,999.600
88.50
144.740
6,192.28
(Tk)
Item
16 Brick work of 1st class bricks in cement
mortar (1:6)
in superstructure in/c raking out joints, Unit
cum
Description
of Item
No. filling interstices tightly with mortar, cleaning and soaking bricks at least for 24 hours before
use, washing of sand, necessary scaffolding, curing for requisite period, etc. all complete as
per direction of the E-I-C. (Minimum FM of sand:1.2) Add for each additional floor up to 5th
floor
Quantity
Break up
2)
79 of 185
77.400
Quoted Rate
144.740
6,192.28
In Figure
In Word
Total
(Tk)
(Tk)
Item
No.
17
18
19
20
21
Quantity
Description of Item
Unit
Break up
125mm brick work with 1st class bricks in cement mortar (1:4) and making bond with sqm
connected walls in/c necessary scaffolding, raking out joints, cleaning and soaking the bricks
at least for 24 hours before use, washing of sand, curing for requisite period, etc. all complete
as per direction of the E-I-C for all floors. (Minimum FM of sand:1.2) Ground Floor
1)
32.904
2)
32.904
125mm brick work with 1st class bricks in cement mortar (1:4) and making bond with sqm
connected walls in/c necessary scaffolding, raking out joints, cleaning and soaking the bricks
at least for 24 hours before use, washing of sand, curing for requisite period, etc. all complete
as per direction of the E-I-C for all floors. (Minimum FM of sand:1.2) Add for each additional
floor up to 5th floor
1)
346.754
2)
346.754
Reinforced cement concrete works (1:1.5:3) to give a minimum Cylinder strength of 250 cum
Kg/cm2 concrete from a machine mixed typical batch with fresh Portland
cement, best quality coarse sand (minimum FM 2.5) and 20mm down graded crushed stone
chips (Preferably stone chips from Madhyapara, Dinajpur) in/c cost of breaking chips,
screening through proper sieves, cleaning and washing thoroughly, centering, shuttering with
MS sheet (minimum 12/14 BWG) and steel form, making shuttering fully leak proof, placing of
reinforcement cage in position, mixing the aggregates with mixer machine, casting in steel
forms, compacting by Mechanical vibrators and tapered rods and curing for 28 days etc all
complete as per direction of the Engineer in charge (Excluding the cost of reinforcements and
its fabrication) etc. all complete as per direction of the E-I-C. In foundation beam
1)
51.354
2)
51.354
Reinforced cement concrete works (1:1.5:3) to give a minimum Cylinder strength of 250 cum
Kg/cm2 concrete from a machine mixed typical batch with fresh Portland cement, best quality
coarse sand (minimum FM 2.5) and 20mm down graded crushed stone chips (Preferably
stone chips from Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper
sieves, cleaning and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14
BWG) and steel form, making shuttering fully leak proof, placing of reinforcement cage in
position, mixing the aggregates with mixer machine, casting in steel forms, compacting by
Mechanical vibrators and tapered rods and curing for 28 days etc all complete as per direction
of the Engineer in charge (Excluding the cost of reinforcements and its fabrication) etc. all
complete as per direction of the E-I-C. In pedestal, column, capital lift wall and wall : Below
Plinth Level and in Ground Floor
1)
18.936
2)
18.936
Reinforced cement concrete works (1:1.5:3) to give a minimum Cylinder strength of 250 cum
Kg/cm2 concrete from a machine mixed typical batch with fresh Portland cement, best quality
coarse sand (minimum FM 2.5) and 20mm down graded crushed stone chips (Preferably
stone chips from Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper
sieves, cleaning and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14
BWG) and steel form, making shuttering fully leak proof, placing of reinforcement cage in
position, mixing the aggregates with mixer machine, casting in steel forms, compacting by
Mechanical vibrators and tapered rods and curing for 28 days etc all complete as per direction
of the Engineer in charge (Excluding the cost of reinforcements and its fabrication) etc. all
complete as per direction of the E-I-C. In pedestal, column, capital lift wall and wall : Add for
each additional floor up to 5th Floor
1)
41.344
80 of 185
Quoted Rate
In Figure
In Word
(Tk)
65.808
883.98
Total
693.508
895.48
102.708
13,177.74
37.872
17,532.13
82.688
17,593.49
(Tk)
Item
Item
21 Reinforced cement concrete works Description
(1:1.5:3) to of
give
a minimum Cylinder strength of 250 Unit
cum
No.
Kg/cm2 concrete from a machine mixed typical batch with fresh Portland cement, best quality
coarse sand (minimum FM 2.5) and 20mm down graded crushed stone chips (Preferably
stone chips from Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper
sieves, cleaning and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14
BWG) and steel form, making shuttering fully leak proof, placing of reinforcement cage in
position, mixing the aggregates with mixer machine, casting in steel forms, compacting by
Mechanical vibrators and tapered rods and curing for 28 days etc all complete as per direction
of the Engineer in charge (Excluding the cost of reinforcements and its fabrication) etc. all
complete as per direction of the E-I-C. In pedestal, column, capital lift wall and wall : Add for
each additional floor up to 5th Floor
Quantity
Break up
2)
81 of 185
41.344
Quoted Rate
82.688 In Figure
17,593.49 In Word
Total
(Tk)
(Tk)
Item
No.
22
23
24
25
Quantity
Description of Item
Unit
Break up
Reinforced cement concrete works (1:1.5:3) to give a minimum Cylinder strength of 250 cum
Kg/cm2 concrete from a machine mixed typical batch with fresh Portland cement, best quality
coarse sand (minimum FM 2.5) and 20mm down graded crushed stone chips (Preferably
stone chips from Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper
sieves, cleaning and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14
BWG) and steel form, making shuttering fully leak proof, placing of reinforcement cage in
position, mixing the aggregates with mixer machine, casting in steel forms, compacting by
Mechanical vibrators and tapered rods and curing for 28 days etc all complete as per direction
of the Engineer in charge (Excluding the cost of reinforcements and its fabrication) etc. all
complete as per direction of the E-I-C. In Tee Beam, Ell Beam, Rectangular Beam etc.
(exposed breadth and width of ribs to be measured only). Ground Floor
1)
13.986
2)
13.986
Labour for breaking head of cast-in-situ bored pile/pre-cast pile up to required length by any
means and removing the dismantled materials, such as, concrete to a safe distance including
scrapping and removing concrete from steel/MS rods, preparation and making of platform
where necessary, carrying, all sorts of handling, stacking the same properly after clearing,
leveling and dressing the site and clearing the river bed, etc. all complete as per direction of
the E-I-C. (Measurement will be given for the actual pile head volume to be broken).
cum
1)
11.424
2)
11.424
Supplying, fitting and fixing door frame with MS angle (38mmx38mmx6mm), fixing, 250mm
long 6 nos. of iron clamps of same size (one end bifurcated) with vertical members of the
frame, fixing the frame in wall with cement concrete (1:2:4), mending good damages, fixing 3
nos. of 100mm size iron hinges with the vertical members of the frame for single leaf shutter,
painting all iron faces in 2 coats over a coat of priming with enamel paint of approved colour
and quality, in/c cutting, sizing, welding for all floors, etc. all complete as per plan and direction
of the E-I-C.
1)
77.400
2)
77.400
1)
30.240
2)
30.240
Supplying, fitting and fixing 38mm thick well matured wood panel door shutters (minimum sqm
250mm wide plank), top, rail and styles of sections (100mmx38mm), lock rail(125mmx38mm)
and bottom rail (225mmx38mm) paneling 38mm thick both sides raised, provided with best
quality 6 nos. 100mm iron hinges, 2 nos. best quality 12mm dia 300mm and 225mm long iron
tower and socket bolts 2 nos. heavy type nickel plated handle, hinge cleats, buffer blocks and
finished with sand papering for all floors etc. all complete as per direction of the E-I-C.
(Double leaf. All sizes of wood are finished). Mehagoni wood
82 of 185
Quoted Rate
In Figure
In Word
(Tk)
27.972
16,157.06
Total
22.848
5,331.05
154.800
743.80
60.480
4,985.44
(Tk)
Item
No.
26
27
28
29
30
31
Quantity
Description of Item
Unit
Break up
Supplying fitting, fixing of UPVC hollow or solid plastic door shutter having specific gravity each
1.35-1.45, thickness 1.7 mm - 2.2 mm and other physical, chemical, thermal, fire resistivity
properties etc. as per BSTI approved manufacturer standards or ASTM, BS/ISO/IS standards
of different sizes fitted fixed with uPVC plastic door frame weighing 5.82 kg/m2 with at least 3
Nos Stainless Steel hinges fitted with min 64 Nos of 3.17 mm - 3.97 mm dia 12.7 mm long
rivets, 12 Nos 25.4 mm Stainless Steel screws. 9.38 mm dia, 150 mm long Stainless Steel
tower bolts 2 Nos, 146 mm long Stainless Steel handle fitted with rivet, fitted with 2 Nos of G.I
inner joint 234.95 mm x 127 mm clamp, 76.2 mm x 57.15 mm, 25 mm dia 1 no Stainless Steel
haspbolt, special type round rack, carrying the same to site and local carriage etc. all
complete as per direction of the E-I-C. 760 x 2130 mm uPVC plastic shutter (solid)
1)
14.000
2)
14.000
Supplying, fitting and fixing window grills of any design made with F.I. bar (20mmx5mm) in/c sqm
fabricating, welding, painting with two coats of synthetic enamel paint over a coat of
anticorrosive priming etc. all complete for all floor as per direction of the E-I-C. (Total wt.per
m2 should be 16.50kg. For each kg excess or less add or deduct, as the case may be, @Tk.
45.00 perkg)
1)
208.683
2)
208.683
Supplying, fitting and fixing of aluminium sliding window as per the U.S. Architectural sqm
Aluminium Manufacturers Association (AAMA) standard specification having 1.5mm thick
outer bottom (size:75.50mm, 17.79mm), 1.5mm thick outer top (size:75.50mm, 26.80mm)
1.5mm thick shutter top (size:33mm, 26.80mm, 22mm), 1.5mm thick shutter bottom
(size:60mm, 24.40mm), 1.5mm thick outer side (size:75.50mm, 19.90mm), 1.5mm thick
sliding fixed side (size:31mm, 26mm), 1.5mm thick shutter lock (size:49.20mm, 26.0mm) and
1.5mm thick interlock (size:34.40mm, 32.10mm). Sections all aluminium members will be
anodized to aluminium bronze/silver colour with a coat not less than 15 microns in thickness
and density of 4mg/cm2 etc. in/c all accessories like handle, locks (Japan), roller, stopper etc.
keeping provision for fitting 5mm thick glass in/c neoprene, sealant for all floors etc. complete
in all respect as per drawing and direction of the E-I-C. Bronze colour[Size :
900mmx1400mm]
1)
202.623
2)
202.623
Supplying, fitting and fixing in Aluminum door frames, window, partitions and curtain wall sqm
distortion free glass of approved quality and shade including cost of fitting fixing all necessary
accessories all floors etc. complete in all respect as per drawing and direction of the E-I-C.
5mm thick clear glass
1)
202.623
2)
202.623
Minimum 12mm thick cement plaster (1:4) to dado and plinth wall up to 150mm below ground
level with neat cement finishing in/c washing of sand, finishing the edges and corners and
curing for the requisite period etc. all complete as per direction of the E-I-C (Sand minimum
FM 1.2).
sqm
1)
40.134
2)
84.600
Minimum 12mm thick cement plaster (1:6) to wall both inner and outer surface, finishing the
corner and edges in/c washing of sand cleaning the surface, scaffolding and curing for the
requisite period etc. all complete as per direction of the E-I-C. (Sand minimum FM
1.2).Ground floor
sqm
1)
184.875
2)
184.875
83 of 185
Quoted Rate
In Figure
In Word
(Tk)
28.000
2,875.60
Total
417.366
2,126.21
405.246
4,769.11
405.246
1,214.70
124.734
237.25
369.750
192.41
(Tk)
Item
No.
32
Quantity
Description of Item
Minimum 12mm thick cement plaster (1:6) to wall both inner and outer surface, finishing the
corner and edges in/c washing of sand cleaning the surface, scaffolding and curing for the
requisite period etc. all complete as per direction of the E-I-C. (Sand minimum FM 1.2). Add
for each additional floor for 5th floor
Unit
sqm
Break up
1)
1,748.700
2)
1,748.700
84 of 185
Quoted Rate
In Figure
In Word
(Tk)
3,497.400
196.26
Total
(Tk)
Item
No.
33
34
35
36
37
38
39
Quantity
Description of Item
Unit
Minimum 6mm thick cement plaster (1:4) to ceiling RCC columns, beams, surface of
staircase, sunshades, cornices, railings, drop wall, louvers, fins and finishing the corners and
edges in/c washing of sand cleaning the surface, scaffolding and curing for the requisite
period etc. all complete as per direction of the E-I-C. (Sand minimum FM 1.2). Ground Floor
sqm
Minimum 6mm thick cement plaster (1:4) to ceiling RCC columns, beams, surface of stair
case, sunshades, cornices, railings, drop wall, louvers, fins and finishing the corners and
edges in/c washing of sand cleaning the surface, scaffolding and curing for the requisite
period etc. all complete as per direction of the E-I-C. (Sand minimum FM 1.2). Add for each
additional floor upto 5th floor
sqm
Break up
1)
624.710
2)
624.710
1)
1,281.245
2)
1,281.245
1)
258.380
2)
258.380
1)
463.150
2)
469.580
Supplying, fitting and fixing unglazed floor tiles (local made) on 20mm thick cement mortar
sqm
(1:2) base and raking out the joints with white cement in/c cutting and laying the tiles in proper
way and finishing with care, etc. all complete as per direction of the E-I-C. Sand of minimum
FM 1.2 to be used. GP (Homogeneous) 400x400 mm size unglazed floor tiles
1)
695.766
2)
695.766
Supplying, fitting and fixing glazed wall tiles of different size (local made) on 20mm thick
cement mortar (1:3) base and raking out the joints with white cement in/c cutting and laying
the tiles in proper way and finishing with care, etc. all complete as per direction of the E-I-C.
Sand of minimum FM 1.2 to be used. coloured glazed wall tiles
sqm
1)
103.262
2)
103.262
Painting with plastic emulsion paint of best quality and approved colour from authorized coat
for each coat and successive coat is to be applied after manufacturer in a seal container, to
wall and ceiling in two coats over a coat of priming coat. Applying one vertical and one
horizontal coat for each coat and successive coat is to be applied after drying up of previous
coat by brush/roller/spray in/c cleaning the plinth, floors, doors, windows, portions and
ventilators by washing, rubbing, as necessary and sand papering the surface and necessary
scaffolding, etc. curing for the requisite period etc. all complete for all floors i/c cost of all
materials as per direction of the E-I-C.
sqm
1)
3,005.960
2)
3,005.960
Providing drip course/nosing/throating at the edge of sunshade or cornice with cement mortar
(1:2) in/c. scaffolding, curing at least for 7 days etc. all complete for all floors as per direction
of the E-I-C (Sand minimum FM 1.2).
38mm thick patent stone floor (1:2:4) with Portland cement, best quality coarse sand (50% of
minimum FM 1.2 and 50% of minimum FM 2.3) and 10mm down graded crushed stone chips
(Preferably stone chips from Madhyapara, Dinajpur), in/c chips screening, mixing, laying the
concrete in alternate panels, compacting and finishing the top with neat cement, curing for
requisite period, etc. all complete as per direction of the E-I-C.
sqm
85 of 185
Quoted Rate
In Figure
In Word
(Tk)
1,249.420
171.24
Total
2,562.490
177.35
516.760
101.35
932.730
509.34
1,391.532
1,586.61
206.524
1,337.91
6,011.920
187.94
(Tk)
Item
No.
40
41
42
43
Quantity
Description of Item
On exterior surface applying as per manufacturer instruction specific coat ofweather coat of
approved quality and colour delivered from authorized local agent of the manufacturer in a
sealed container. Applying one vertical and one horizontal coat for each coat and successive
coat is to be applied after drying up of previous coat by brush/roller/spray in/c cleaning,
washing, rubbing, as necessary and sand papering the surface and necessary scaffolding,
etc. all complete for all floors i/c cost of all materials as per direction of the E-I-C.3 coat
Unit
sqm
Break up
1)
1,892.625
2)
1,892.625
Painting to door and window frames and shutters in two coats with synthetic enamel paint of
sqm
best quality and approved colour over a coat of priming. Applying one vertical and one
horizontal coat for each coat and successive coat is to be applied after drying up of previous
coat by brush/roller/spray in/c cleaning, washing, rubbing, as necessary and sand papering
the surface and necessary scaffolding, etc. all complete for all floors i/c cost of all materials as
per direction of the E-I-C.
1)
64.002
2)
64.002
Manufacturing,
supplying,
fitting
and
fixing
collapsible
gate
made
of sqm
20mmx20mmx3mm/25mmx25mmx3mm MS angle placed @112mm c/c vertically and
connecting the same with each other with 20mmx3mm/25mmx3mm MS flat bar scissors
525mm/600mm long provided in three rows in/c cutting the different MS members to required
sizes, fabricating, welding, riveting with required size rivets, providing required size wheels,
pulling handles on both sides, suitable looking arrangement and finally placing the same in
position in between two nos. 50mmx50mmx6mm MS Tee rail made by welding two nos.
50mmx6mm MS flat bar fitted and fixed at top and bottom with R.C.C. lintel/roof slab, floors
and side wall with required nos. 150mm to 225mm long 38mmx6mm MS flat bar clamps one
end welded with the gate member and the other end bifurcated and embedded in C.C (1:2:4)
in/c cutting holes and mending good the damages, painting two coats with approved synthetic
enamel paint over a coat of anticorrosive painting etc. all complete as per drawing and design
and direction of E-I-C. Collapsible gate made of 20mm x 20mm x 3mm M.S. angle as vertical
member and 20mm x 3mm F.I bar as scissors.
1)
20.130
2)
20.130
Reinforced cement concrete work in well caps, pile caps, bearing sheets, abutment base, etc. cum
with Portland cement, sand (minimum FM 1.80) and 20mm down well graded crushed stone
chips (Preferably stone chips from Madhyapara, Dinajpur), (LAA value not exceeding
30),admixture with proper dodge, including shuttering, mixing by concrete mixer machine
casting, laying, compacting and curing, for 28 days, breaking stone boulders into chips etc. all
complete as per direction of the E-I-C but excluding cost of reinforcement. Cylinder crushing
strength of concrete should not be less than 250kg/cm2 at 28 days of curing (suggested mix
proportion 1:1.5:3, w/c max. 0.4). Additional quantity of cement to be added if required to
attain the strength at the contractor's own cost.
1)
51.360
2)
51.360
86 of 185
Quoted Rate
In Figure
In Word
(Tk)
3,785.250
208.54
Total
128.004
190.80
40.260
3,947.97
102.720
12,490.21
(Tk)
Item
No.
44
45
46
Quantity
Description of Item
Unit
Break up
Earthwork in excavation of foundation trenches, including layout, by excavating earth to the cum
lines, grades and elevation as shown in the drawing providing center lines, local bench mark
pillars, fixing bamboo spikes and marking layout with chalk powder filling baskets, carrying
and disposing of all excavated materials at a safe distance designated by the E-I-C inall types
of soils except rocky, gravelly, slushy or organic soil, leveling, ramming, dressing and
preparing the base, etc. all complete for an initial excavation depth of 2m and an initial lead
not exceeding 20m, including arranging all necessary tools and equipment at work site, etc.
complete as per direction of the E-I-C.
1)
135.951
2)
135.951
Reinforced cement concrete works (1:1.5:3) to give a minimum Cylinder strength of 250 cum
Kg/cm2 concrete from a machine mixed typical batch with fresh Portland cement, best quality
coarse sand (minimum FM 2.3) and 20mm down graded crushed stone chips (Preferably
stone chips from Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper
sieves, cleaning and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14
BWG) and steel form, making shuttering fully leak proof, placing of reinforcement cage in
position, mixing the aggregates with mixer machine, casting in steel forms, compacting by
Mechanical vibrators and tapered rods and curing for 28 days etc all complete as per direction
of the Engineer in charge (Excluding the cost of reinforcements and its fabrication) etc. all
complete as per direction of the E-I-C. In roof slab of all types, cantilever slab and drop panels
(excluding floor slab of ground floor at plinth level). Ground Floor
1)
39.210
2)
39.210
Reinforced cement concrete works (1:1.5:3) to give a minimum Cylinder strength of 250 cum
Kg/cm2 concrete from a machine mixed typical batch with fresh Portland cement, best quality
coarse sand (minimum FM 2.3) and 20mm down graded crushed stone chips (Preferably
stone chips from Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper
sieves, cleaning and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14
BWG) and steel form, making shuttering fully leak proof, placing of reinforcement cage in
position, mixing the aggregates with mixer machine, casting in steel forms, compacting by
Mechanical vibrators and tapered rods and curing for 28 days etc all complete as per direction
of the Engineer in charge (Excluding the cost of reinforcements and its fabrication) etc. all
complete as per direction of the E-I C. In roof slab of all types, cantilever slab and drop panels
(excluding floor slab of ground floor at plinth level). Add for each additional floor upto 5th floor
1)
114.061
2)
114.061
87 of 185
Quoted Rate
In Figure
In Word
(Tk)
271.902
113.59
Total
78.420
15,584.11
228.122
15,646.45
(Tk)
Item
No.
47
48
49
Quantity
Description of Item
Unit
Break up
Reinforced cement concrete works (1:1.5:3) to give a minimum Cylinder strength of 250 cum
Kg/cm2 concrete from a machine mixed typical batch with fresh Portland cement, best quality
coarse sand (minimum FM 2.3) and 20mm down graded crushed stone chips (Preferably
stone chips from Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper
sieves, cleaning and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14
BWG) and steel form, making shuttering fully leak proof, placing ofreinforcement cage in
position, mixing the aggregates with mixer machine, casting in steel forms, compacting by
Mechanical vibrators and tapered rods and curing for 28 days etc all complete as per direction
of the Engineer in charge (Excluding the cost of reinforcements and its fabrication) etc. all
complete as per direction of the E-I-C. In Stair case slab and step Ground Floor
1)
5.200
2)
5.200
Reinforced cement concrete works (1:1.5:3) to give a minimum Cylinder strength of 250 cum
Kg/cm2 concrete from a machine mixed typical batch with fresh Portland cement, best quality
coarse sand (minimum FM 2.3) and 20mm down graded crushed stone chips (Preferably
stone chips from Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper
sieves, cleaning and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14
BWG) and steel form, making shuttering fully leak proof, placing of reinforcement cage in
position, mixing the aggregates with mixer machine, casting in steel forms, compacting by
Mechanical vibrators and tapered rods and curing for 28 days etc all complete as per direction
of the Engineer in charge (Excluding the cost of reinforcements and its fabrication) etc. all
complete as per direction of the E-I-C. In Stair case slab and step Add for each additional
floor upto 5th floor
1)
9.160
2)
9.160
Reinforced cement concrete works (1:2:4) to give a minimum Cylinder strength of 210kg/cm2 cum
concrete from a machine mixed typical batch with fresh cement, best quality coarse sand
(minimum FM 2.5 and 20mm down graded crushed stone chips (Preferably stone chips from
Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper sieves, cleaning
and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14 BWG) and steel
form, making shuttering fully leak proof, placing of reinforcement cage in position, mixing the
aggregates with mixer machine, casting in steel forms, compacting by Mechanical vibrators
and tapered rods and curing for 28 days etc. all complete as per direction of the E-I-C
(Excluding the cost of reinforcements and its fabrication) etc. all complete as per direction of
the E-I-C. In individual and continuous footing of column, raft and floor slab at plinth level.
1)
56.400
2)
56.400
88 of 185
Quoted Rate
In Figure
In Word
(Tk)
10.400
15,469.52
Total
18.320
15,531.40
112.800
10,514.78
(Tk)
Item
No.
50
51
52
53
54
Quantity
Description of Item
Unit
Break up
Reinforced cement concrete works (1:2:4) to give a minimum Cylinder strength of 210kg/cm2 cum
concrete from a machine mixed typical batch with fresh cement, best quality coarse sand
(minimum FM 2.5 and 20mm down graded crushed stone chips (Preferably stone chips from
Madhyapara, Dinajpur) in/c cost of breaking chips, screening through proper sieves, cleaning
and washing thoroughly, centering, shuttering with MS sheet (minimum 12/14 BWG) and steel
form, making shuttering fully leak proof, placing of reinforcement cage in position, mixing the
aggregates with mixer machine, casting in steel forms, compacting by Mechanical vibrators
and tapered rods and curing for 28 days etc. all complete as per direction of the E-I-C
(Excluding the cost of reinforcements and its fabrication) etc. all complete as per direction of
the E-I-C.In Tie Beam and lintel :Add for each additional floor up to 5th Floor
1)
24.090
2)
24.090
1)
35.720
2)
35.720
Supply of First Aid box with standard contents ( sterile gauze, adhesive tape, adhesive
bandages in several sizes, antiseptic wipes-Detol, Savlon,Haxasol,soap, antibiotic cream,
scissors, safety pins, thermometer, plastic gloves (at least 2 pairs), flashlight, Water purifier
tablet, Common disaster recovery medicines.) etas per direction of E.I.C
1)
1.000
2)
1.000
Tree Plantation around the shelter and road including maintenance for 2 years as required each
and as per direction the E-I-C. (Coconut,mango,Jacfrout to be planted. The payment is to be
made only when tree are fully grown)
1)
150.000
2)
150.000
Turfing on approach embankment Top & slope, building compound with good quality turf sqm
supplied by the contractor of not less than 225 mm x 225 mm in dimension including leveling,
dressing, placing, anchoring turf with pegs, and watering till grass is fully grown, etc. all
complete as per direction of the Engineer-in-Charge. (Payment to be made only when grass is
fully grown)
1)
205.000
2)
205.000
no
89 of 185
Quoted Rate
In Figure
In Word
(Tk)
48.180
12,788.24
Total
71.440
285.19
2.000
1,170.00
300.000
100.00
410.000
16.24
(Tk)
Item
No.
55
56
Quantity
Description of Item
Unit
Break up
Anti-Salinity and Damp Profooing Admixture for 12mm thick Plastering Work in proportion sqm
(1:6) on new surface: Supplying and applying specified type of chemicals such as Desalt-S01
and Foam-Lub or equivalent admixture, confirming the current chemical specification
requirements like physical properties, uniformity & equivalence in composition etc. for
treatment of anti-salinity, water & damp proofing, getting high work-abilities, better
compatibility, vibration tolerance, void & porosity reducing, partially auto curing, etc. at inside,
outside brick wall and concrete faces. Prepare a mixture with the proportion of 1 liter DesaltS01, 10 liter Water and 25ml or 1 div Catalyst. Cleaning the surface properly and apply one
coat of Desalt-S01 mixture with a jute brush or spray over the exposed concrete or brick
surface (before plaster). Use the mixture within 2 hours of preparation. After that, prepare
sand-cement mortar for plastering work using admixture as Foam-lub 250ml with 50kg
cement. Initially 250ml Foam-lub for 1bag cement is to be mixed with required amount of
water which will be used in preparation of sand cement mortar or doges mentioned in the
manufacturers brochures and strictly following the recommendation and instruction, providing
safety provision in all respect etc. all complete as per direction of the E-I-C. (Excluding cost of
Plastering Work).
1)
184.875
2)
184.875
Anti-Salinity and Damp Profooing Admixture for 6mm thick Plastering Work in proportion (1:4) sqm
on new surface: Supplying and applying specified type of chemicals such as Desalt-S01 and
Foam-Lub or equivalent admixture, confirming the current chemical specification
requirements like physical properties, uniformity & equivalence in composition etc. for
treatment of anti-salinity, water & damp proofing, getting high work-abilities, better
compatibility, vibration tolerance, void & porosity reducing, partially auto curing, etc. at inside,
outside brick wall and concrete faces. Prepare a mixture with proportion of 1 liter Desalt-S01,
10 liter Water and 25ml or 1 div Catalyst. Cleaning the surface properly and apply one coat of
Desalt-S01 mixture with a jute brush or spray over the exposed concrete or brick surface
(before plaster). Use the mixture within 2 hours of preparation. After that, prepare sandcement mortar for plastering work using admixture as Foam-lub 250ml with 50kg cement.
Initially 250ml Foam-lub for 1bag cement is to be mixed with required amount of water which
will be used in preparation of sand cement mortar or doges mentioned in the manufacturers
brochures and strictly following the recommendation and instruction, providing safety
provision in all respect etc. all complete as per direction of the E-I-C. (Excluding cost of
Plastering Work).
1)
1,905.955
2)
1,905.955
90 of 185
Quoted Rate
In Figure
In Word
(Tk)
369.750
25.92
Total
3,811.910
24.25
(Tk)
Item
No.
57
58
59
60
Quantity
Description of Item
Unit
Break up
Anti-Salinity and Damp Profooing Admixture for 12mm thick Plastering Work in proportion
sqm
(1:4) on new surface: Supplying and applying specified type of chemicals such as Desalt-S01
and Foam-Lub or equivalent admixture, confirming the current chemical specification
requirements like physical properties, uniformity & equivalence in composition etc. for
treatment of anti-salinity, water & damp proofing, getting high work-abilities, better
compatibility, vibration tolerance, void & porosity reducing, partially auto curing, etc. at inside,
outside brick wall and concrete faces. Prepare a mixture with the proportion of 1 liter DesaltS01, 10 liter Water and 25ml or 1 div Catalyst. Cleaning the surface properly and apply one
coat of Desalt-S01 mixture with a jute brush or spray over the exposed concrete or brick
surface (before plaster). Use the mixture within 2 hours of preparation. After that, prepare
sand-cement mortar for plastering work using admixture as Foam-lub 250ml with 50kg
cement. Initially 250ml Foam-lub for 1bag cement is to be mixed with required amount of
water which will be used in preparation of sand cement mortar or doges mentioned in the
manufacturers brochures and strictly following the recommendation and instruction, providing
safety provision in all respect etc. all complete as per direction of the E-I-C. (Excluding cost of
Plastering Work).
1)
40.134
2)
40.134
Clearing by removal and disposal at a safe distance of everything above ground level which
shall include trees, stumps, logs, bush, undergrowth grass, crops, loose vegetable, structures,
etc. all complete as per instruction of the E-I-C.
1)
1.000
2)
1.000
Welding at the splicing point of main reinforcement at 3 points (each point being 25mm in each
length) and each alternate contact point of spiral binder tie rod with the main vertical
reinforcement of the bored piles using electrodes including the cost of all materials, labours,
tools and equipment, the cost of power, etc. all complete as per drawings, specifications and
directions of the Engineer. For spiral spot welding,(each alternate contact point of spiral
binder tie rod with the main vertical reinforcement)
1)
57,120.000
2)
171,360.000
Welding at the splicing point of main reinforcement at 3 points (each point being 25mm in each
length) and each alternate contact point of spiral binder tie rod with the main vertical
reinforcement of the bored piles using electrodes including the cost of all materials, labours,
tools and equipment, the cost of power, etc. all complete as per drawings, specifications and
directions of the Engineer. For lap welding of main reinforcement,3points (each point)
1)
1,120.000
2)
1,680.000
LS
91 of 185
Quoted Rate
In Figure
In Word
(Tk)
80.268
27.83
Total
2.000
5,000.00
228,480.000
3.09
2,800.000
22.87
(Tk)
Quantity
Item
No.
61
Description of Item
Unit
Boring and casting of RCC cast-in-situ piles up to the required depth and
cum
diameter with temporary steel casing in all types of soils including 2-chamber slurry tank,
drilling"Boring and casting of RCC cast-in-situ piles up to the required depth and diameter with
temporary steel casing in all types of soils including 2-chamber slurry tank, drilling with
bentonite circulation (Dry Bentonite powder of liquid limit of minimum 350 shall be mixed with
water @ minimum 4% by weight to make the fresh drilling fluid of viscosity between 32-50
seconds and density less than 1.1gm/cc). Washing bore hole with bentonite slurry (until the
slurry from bore hole bottom have density less than 1.15gm/cc and sand less than 4%)
placing of reinforcement and placing concrete by tremie pipe with ordinary Portland cement,
sand (minimum FM 2.50) and 19mm down graded crushed stone chips , (LAA value not
exceeding 30) to result minimum ultimate cylinder crushing strength of 250 kg/cm2 at 28 days
(suggested minimum mix proportion 1:1.5:3) with allowable slump of 150mm to 200mm (using
necessary admixture : ASTM C494/C494M and additional cement) including cost of all
materials, labour, equipment and all incidental charges but excluding the cost of
reinforcement and its fabrication, etc. all complete as per design, drawing, specifications and
direction of the Engineer. Additional quantity of cement be added, if required to attain the
aforementioned concrete strength, by the contractor at his own costs.(Boring m ethod shall be
selected as set in the drawing). Concreting (with water reducing Admixture)
Break up
1)
351.568
2)
531.440
Supplying, fitting and fixing, Bangladesh pattern BISF Standard simple type Porcelain Long each
Pan (Model-323, size-520x290x260mm) or equivalent simple type of vitreous China with
Siphon and preparing the base of pan with cement concrete and wire net or rods including
making holes in walls and floors wherever required and mending good the damages,
supplying Porcelain lowdown with master Siphon with Low down cover and all fittings, fitting
fixing the same in position with C.I. brackets including supplying best quality 38mm dia PVC
flush pipe with brass coupling (not exceeding 1.80m in length), 12mm dia plastic connection
pipe with brass coupling, 12mm dia brass stop cock, 12mm dia ball cock and pulling chain
etc. all complete as per direction of the E-I-C. White [BISF STANDARD]
(520mmx290mmx260mm)
1)
12.000
2)
12.000
Supplying, fitting and fixing "BISF STANDARD" glazed vitreous Wash Hand Basin (Model- each
213, size-450x405x180mm, Bowl size-375x275x136mm) including fitting fixing the same in
position with heavy type C.I. brackets, 44mm dia PVC waste water pipe with brass coupling
(not exceeding 750mm in length), 12mm dia plastic connection pipe with brass coupling,
12mm dia brass stop cock, 12mm dia C.P. pillar cock, 30mm dia C.P. Basin waste with chain
plug including making holes in walls and floors and fitting with royal plug, screws and mending
good the damages etc. all complete as per direction of the E-I-C. White "BISF STANDARD
6.000
2)
6.000
Quoted Rate
In Figure
In Word
(Tk)
883.008
11,818.91
Total
63
92 of 185
24.000
6,201.23
12.000
3,630.43
(Tk)
Item
No.
64
65
66
67
68
69
70
71
Quantity
Description of Item
Unit
Supplying, fitting and fixing GI pipe confirming to the standard BS-1387 & BDS-1031, having
chemical composition (in%) Carbon 0.17-0.25, Manganese 0.95-1.20, Sulphur 0.060 max,
Phosphorous 0.060 max, Tensile properties: minimum Yield Strengh 188 MPa, minimum
Tensile Strength 313 MPa and marking for a) Manufacturer; b) Materials; c) Wall thickness; d)
Nomal outside dia; e) Intended use etc. on the body of the pipe as per British standard BS729 having 80 micron galvanization and hydrostatic test pressure 50kg/cm2 (710 psi) with all
general special fittings such as bends, elbows, sockets, reducing sockets, Tees, unions, jamnuts etc. including cutting trenches where necessary and fitting the same with earth duly
rammed and fixing in walls with holder bats and making holes in floors and walls and mending
good the damages etc. all complete in all respects as per direction of the E-I-C. (Pipe
manufactured by National Tubes Limited under Steel & Engineering Corporation, Ministry of
Industries, Government of Bangladesh shall be given priority) 12~15mm dia GI pipe wall
thickness 2.00mm
Break up
1)
44.000
2)
44.000
Supplying, fitting and fixing best quality and heavy type bib cock, and Two in one Bib cock of each
brass or cromium plated or special quality plastic materials made with leak proof and fixing in
position with selected tape etc. all complete as per direction of the E-I-C. 12mm dia Brass Bib
Cock
1)
44.000
2)
44.000
Supplying, fitting and fixing best quality Stop Cock of fully brass or cromium plated materials each
made with leak proof and fixing in position with selected tape etc. all complete as per direction
of the E-I-C. 12mm dia Brass Stop Cock (thread type)
1)
55.000
2)
55.000
Supplying, fitting and fixing Standard Size porcelain soap tray fitted with rowel plug and screw each
including making holes in walls by drill machine and mending good the damages etc. all
complete as per direction of the E-I-C. White (150mmx110mmx40mm size)
1)
14.000
2)
14.000
Supplying, fitting and fixing toilet paper holder fitted with rowel plug and screw including each
making holes in walls by drill machine and mending good the damages etc. all complete as
per direction of the E-I-C. Porcelain toilet paper holder (Superior Quality), Size: 185x115mm,
Model: RAK or Equivalent
1)
11.000
2)
11.000
Supplying, fitting and fixing Glass plate Shelf (600mmx125mm) of 5mm thick glass with fancy each
C.P. brackets, screws and frames fitted with rowel plug and screw including making holes in
walls by drill machine and mending good the damages etc. all complete as per direction of the
E-I-C. Super quality (white)
1)
12.000
2)
12.000
Supplying, fitting and fixing Towel rail with holder fitted with rowel plug and screw including each
making holes in walls by drill machine and mending good the damages etc. all complete as
per direction of the E-I-C. C.P. Towel rail (Size : 600mmx20mm) with C.P. holder (Super
quality)
1)
14.000
2)
14.000
Supplying, fitting and fixing super quality unframed 5mm thick Mirror with hard boards at the each
back with all necessary fittings fitted with rowel plug and screw including making holes in walls
by drill machine and mending good the damages etc. all complete as per direction of the E-IC. Japan made Mirror (Size:450mmx350mm)
1)
12.000
93 of 185
Quoted Rate
In Figure
In Word
(Tk)
88.000
242.39
Total
88.000
470.12
110.000
470.12
28.000
228.12
22.000
671.71
24.000
637.49
28.000
851.73
24.000
629.81
(Tk)
Item
Description of Item
Unit
No.
71 Supplying, fitting and fixing super quality unframed 5mm thick Mirror with hard boards at the each
back with all necessary fittings fitted with rowel plug and screw including making holes in walls
by drill machine and mending good the damages etc. all complete as per direction of the E-IC. Japan made Mirror (Size:450mmx350mm)
Quantity
Break up
2)
94 of 185
12.000
Quoted Rate
Total
24.000
In Figure
In Word
629.81
(Tk)
(Tk)
Item
No.
72
73
74
75
76
77
Quantity
Description of Item
Unit
Supplying, fitting and fixing GI pipe confirming to the standard BS-1387 & BDS-1031, having
chemical composition (in%) Carbon 0.17-0.25, Manganese 0.95-1.20, Sulphur 0.060 max,
Phosphorous 0.060 max, Tensile properties: minimum Yield Strengh 188 MPa, minimum
Tensile Strength 313 MPa and marking for a) Manufacturer; b) Materials; c) Wall thickness; d)
Nomal outside dia; e) Intended use etc. on the body of the pipe as per British standard BS729 having 80 micron galvanization and hydrostatic test pressure 50kg/cm2 (710 psi) with all
general special fittings such as bends, elbows, sockets, reducing sockets, Tees, unions, jamnuts etc. including cutting trenches where necessary and fitting the same with earth duly
rammed and fixing in walls with holder bats and making holes in floors and walls and mending
good the damages etc. all complete in all respects as per direction of the E-I-C. (Pipe
manufactured by National Tubes Limited under Steel & Engineering Corporation, Ministry of
Industries, Government of Bangladesh shall be given priority) 20mm dia GI pipe wall
thickness 2.10~2.2mm
Break up
1)
46.000
2)
46.000
Supplying, fitting and fixing 3.66m long Ventilation pipe with all fittings and specials like 50mm each
plain bends, tees, 50mm dia cowls etc. including gasket with cement joints and mending good
the damages etc. all complete as per direction of the E-I-C. 3.66m long 50mm dia PVC best
quality Ventilation Pipe (B.S. 3505)
1)
8.000
2)
8.000
Supplying, fitting and fixing GI pipe confirming to the standard BS-1387 & BDS-1031, having each
chemical composition (in%) Carbon 0.17-0.25, Manganese 0.95-1.20, Sulphur 0.060 max,
Phosphorous 0.060 max, Tensile properties: minimum Yield Strengh 188 MPa, minimum
Tensile Strength 313 MPa and marking for a) Manufacturer; b) Materials; c) Wall thickness; d)
Nomal outside dia; e) Intended use etc. on the body of the pipe as per British standard BS729 having 80 micron galvanization and hydrostatic test pressure 50kg/cm2 (710 psi) with all
general special fittings such as bends, elbows, sockets, reducing sockets, Tees, unions, jamnuts etc. including cutting trenches where necessary and fitting the same with earth duly
rammed and fixing in walls with holder bats and making holes in floors and walls and mending
good the damages etc. all complete in all respects as per direction of the E-I-C. (Pipe
manufactured by National Tubes Limited under Steel & Engineering Corporation, Ministry of
Industries, Government of Bangladesh shall be given priority) 12~15mm dia GI pipe wall
thickness 2.65mm
1)
116.000
2)
116.000
Supplying, fitting and fixing 100mm dia C.I. Trap (Siphon trap or P trap) including making each
holes in walls and floors and mending good the damages etc. all complete as per direction of
the E-I-C.
1)
16.000
2)
16.000
Supplying different inside dia best quality uPVC C-grade pipe for water supply having specific
gravity 1.35 - 1.45, and other physical, chemical, thermal, fire resistivity properties etc. as per
BSTI approved manufacturer standards or ASTM, BS/ISO/IS standards fitted and fixed in
position with sockets, bends, with all accessories such as Round grating/domed roof grating,
bends, sockets (length: 6 meter each) etc. all complete as per direction of the E-I-C. 12 mm
dia wall thickness 2.8 mm - 3.3 mm
1)
47.000
2)
47.000
Supplying, fitting, fixing and laying 100mm dia best quality PVC "B" class water grade (LIRA /
AZIZ / NATIONAL POLYMER BRAND or equivalent) swerage pipe including necessary fittings
and jointswith high class solution and fixed in position horizontally or vertically with sockets
head and shoes, bends, clamps and nails etc. as required all complete as per direction of the
E-I-C., 100mm dia PVC "B" class sewerage pipe
1)
113.000
95 of 185
Quoted Rate
In Figure
In Word
(Tk)
92.000
298.75
Total
16.000
1,627.75
232.000
293.63
32.000
198.52
94.000
44.20
226.000
526.50
(Tk)
Item
Description of Item
Unit
No.
77 Supplying, fitting, fixing and laying 100mm dia best quality PVC "B" class water grade (LIRA / m
AZIZ / NATIONAL POLYMER BRAND or equivalent) swerage pipe including necessary fittings
and jointswith high class solution and fixed in position horizontally or vertically with sockets
head and shoes, bends, clamps and nails etc. as required all complete as per direction of the
E-I-C., 100mm dia PVC "B" class sewerage pipe
Quantity
Break up
2)
96 of 185
113.000
Quoted Rate
Total
226.000
In Figure
In Word
526.50
(Tk)
(Tk)
Item
No.
78
79
80
81
82
Quantity
Description of Item
Unit
Supplying different inside dia best quality ABS pipe for water supply having specific gravity
1.35 - 1.45, and other physical, chemical, thermal, fire resistivity properties etc. as per BSTI
approved manufacturer standards or ASTM, BS/ISO/IS standards fitted and fixed in position
with sockets, bends, with all accessories such as Round grating/domed roof grating, bends,
sockets (length: 6 meter each) etc. all complete as per direction of the E-I-C. 19 mm dia wall
thickness 2.9 mm - 3.4 mm
Break up
1)
23.500
2)
23.500
Supplying different inside dia best quality uPVC special fittings having specific gravity 1.35 each
-1.45, wall thickness 2.7 mm - 3.4 mm, and other physical, chemical, thermal, fire resistivity
properties etc. as per BSTI approved manufacturer standards or ASTM, BS/ISO/IS standards,
fitted and fixed in position with sockets, bends, with all accessories such as Round
grating/domed roof grating bands, sockets etc. all complete as per direction of the E-I-C. 100
mm dia uPVC P or S trap
1)
28.000
2)
28.000
Supplying, fitting and fixing GI pipe confirming to the standard BS-1387 & BDS-1031, having
chemical composition (in%) Carbon 0.17-0.25, Manganese 0.95-1.20, Sulphur 0.060 max,
Phosphorous 0.060 max, Tensile properties: minimum Yield Strengh 188 MPa, minimum
Tensile Strength 313 MPa and marking for a) Manufacturer; b) Materials; c) Wall thickness; d)
Nomal outside dia; e) Intended use etc. on the body of the pipe as per British standard BS729 having 80 micron galvanization and hydrostatic test pressure 50kg/cm2 (710 psi) with all
general special fittings such as bends, elbows, sockets, reducing sockets, Tees, unions, jamnuts etc. including cutting trenches where necessary and fitting the same with earth duly
rammed and fixing in walls with holder bats and making holes in floors and walls and mending
good the damages etc. all complete in all respects as per direction of the E-I-C. (Pipe
manufactured by National Tubes Limited under Steel & Engineering Corporation, Ministry of
Industries, Government of Bangladesh shall be given priority) 25mm dia GI pipe wall
thickness 2.65mm
1)
83.600
2)
83.600
Construction and placing of R.C.C inspection pit cover (100 mm thick RCC slab) in (1:2:4) (of each
item no-5.05.01.01) with 1% reinforcement (of item no-5.06.01.01) excluding M.H cover with
locking/ unlocking arrangement including necessary earth work, side filling, shuttering, curing,
cement plaster (1:4) (of item no-5.12.01) with neat finishing on edges and top etc. all
complete and as per direction of the E-I-C. 900 x 900 x 75 mm R.C.C pit cover
1)
7.000
2)
7.000
Construction of Septic Tank with brick masonry works in main and partition walls in cement each
mortar (1:6) as per approved plan over a single layer brick flat soling and 150mm thick
cement concrete flooring (1:2:4), in/c 20mm thick cement plaster (1:4) to inside of walls with
neat cement finishing, 25mm thick patent stone (1:2:4) flooring with neat cement finishing
including supplying fitting and fixing of two RCC Tees and providing 450mm dia water sealed
heavy type C.I. M.H. cover with necessary locking arrangements, 100mm thick RCC (1:2:4)
top slab with minimum 1% reinforcement including centering, shuttering, fabricating, casting,
curing etc. complete upto required depth. The item is inclusive of necessary earth work in
excavation and shoring, bailing out water and side filling including the cost of all materials,
operations and incidental charges etc. all complete as per the approved plan and direction of
the E-I-C. For 200 users with 3 manhole covers.
1)
1.000
97 of 185
Quoted Rate
In Figure
In Word
(Tk)
47.000
409.93
Total
56.000
409.13
167.200
423.38
14.000
1,384.66
2.000
190,248.73
(Tk)
Item
Description of Item
Unit
No.
82 Construction of Septic Tank with brick masonry works in main and partition walls in cement each
mortar (1:6) as per approved plan over a single layer brick flat soling and 150mm thick
cement concrete flooring (1:2:4), in/c 20mm thick cement plaster (1:4) to inside of walls with
neat cement finishing, 25mm thick patent stone (1:2:4) flooring with neat cement finishing
including supplying fitting and fixing of two RCC Tees and providing 450mm dia water sealed
heavy type C.I. M.H. cover with necessary locking arrangements, 100mm thick RCC (1:2:4)
top slab with minimum 1% reinforcement including centering, shuttering, fabricating, casting,
curing etc. complete upto required depth. The item is inclusive of necessary earth work in
excavation and shoring, bailing out water and side filling including the cost of all materials,
operations and incidental charges etc. all complete as per the approved plan and direction of
the E-I-C. For 200 users with 3 manhole covers.
Quantity
Break up
2)
98 of 185
1.000
Quoted Rate
Total2.000
In Figure
In Word
190,248.73
(Tk)
(Tk)
Quantity
Item
No.
83
84
85
86
Description of Item
(7.32A) Supplying, fitting and fixing best quality G.M. Pit valve., 75mm dia peet valve
Unit
each
Break up
1)
10.000
2)
10.000
Construction of masonry inspection pit with 250 mm thick brick work in cement mortar (1:4)
each
including necessary earth work side filling and one layer brick flat soling, 75 mm thick (1:3:6)
base concrete for making invert channel and 12 mm thick (1:2) cement plaster with neat
finishing up to a depth of 700 mm etc. all complete and as per direction of the E-I-C (minimum
sand F.M. 1.2). Clear 520x525 mm and depth 675 to 825 mm average 750 mm for single 225
mm dia R.C.Cofpipes
mm
PVC pipe
Construction
soakand
well400
with
250mm
thick solid brick work (1:6) and 250mm honey comb each
brick work (1:6) as per design over RCC (1:2:4) well curb with 1.5% reinforcement upto the
depth as per drawing with 100mm dia water sealed heavy type C.I. manhole cover with all
locking arrangements, filling the well upto the required depth with graded khoa and sand
including supplying and fabricating MS Rod, casting, curing etc. The item is inclusive of
necessary earth work in excavation, side filling and bailing out water etc. all complete as per
drawing, design and direction of the E-I-C. For 200 users
1)
10.000
2)
10.000
1)
1.000
2)
1.000
Supplying and installation of Manhole cover on valve chamber including carrying and each
supplying of all materials, 500mm dia Manhole cover, fitting, fixing, all complete as per
direction of the E-I-C.
1)
1.000
2)
1.000
Supplying fan hook of 16mm dia MS rod (one meter long) having rounded hook at the middle each
of bar in proper size i/c. fabrication and fixing in position in all floors etc. all complete as per
direction of the E-I-C.
1)
34.000
2)
34.000
Supplying, fitting and fixing main/sub-main switches with fuse on live side and neutral line on each
concealed iron frame (Bangladeshi made of prior approved quality) or equivalent as per
specification and direction of the E-I-C. 500 Volts ICTP 200 amps
1)
16.000
2)
16.000
ELECTRICAL WIRING Concealed Conduit wiring: Concealed Conduit wiring for the following point
Points Looping at the Switch board with earth terminal including Circuit wiring with 1c-2x1.5
Sq.mm PVC insulated stranded cable (BYA) & 1.5 mm rm (green) PVC insulated stranded
ECC wire (BYA) through PVC conduit (Aziz or equivalent) of 25 mm inner dia wall thickness
1.5 mm, 18 SWG GP Sheet, switch board & Pull box with 3mm thick ebonite sheet cover,
brass contact, ceiling rose, fixing materials & all other accessories as required including
mending
the damages: Manufacturer of cable Eastern/ BRB/Citizen/Paradise/Poly
cable/Super sign/EVANA or equivalent according to the specification & direction of the
Engineer- in-charge. Light point/Exhaust/Wall bracket fan point
1)
190.000
2)
190.000
Quoted Rate
Total
In Figure
In Word
(Tk)
1,755.00
20.000
5,049.93
20.000
2.000
93,384.16
2.000
8,331.31
68.000
107.86
32.000
8,255.69
380.000
1,270.57
88
89
99 of 185
(Tk)
Item
No.
90
91
92
93
94
95
Quantity
Description of Item
Unit
Break up
ELECTRICAL WIRING Concealed Conduit wiring: Concealed Conduit wiring for the following point
Points Looping at the Switch board with earth terminal including Circuit wiring with 1c-2x1.5
Sq.mm PVC insulated stranded cable (BYA) & 1.5 mm rm (green) PVC insulated stranded
ECC wire (BYA) through PVC conduit (Aziz or equivalent) of 25 mm inner dia wall thickness
1.5 mm, 18 SWG GP Sheet, switch board & Pull box with 3mm thick ebonite sheet cover,
brass contact, ceiling rose, fixing materials & all other accessories as required including
mending
the damages: Manufacturer of cable Eastern/ BRB/Citizen/Paradise/Poly
cable/Super sign/EVANA or equivalent according to the specification & direction of the
Engineer- in-charge. Ceiling fan point
1)
34.000
2)
34.000
Supplying, fitting and fixing Distribution/Sub-Distribution board made of 18 SWG steel sheet sqm
metal enclosed with double cover, gray hammer painted on outside and enamel paint on
inside on rust proof prime coat with hinged front door with lock and key arrangement for half
concealed mounted board having knock out for conduit entry and exit for 415/230V TP&N/
SP&N operations. The board shall have solid neutral and earth copper bus bar and also
required size off 3 phase copper bus bars covering transperent fiber glass. All bars shall have
required number of holes of 5mm for cable connections etc. all complete as per drawing,
design and direction of E-I-C.
1)
2.000
2)
2.000
Earthing the electrical installation with 38mm dia GI pipe (earth electrode) having 6mm dia set
holes across the dia at 1.0m interval securedly bonded with 2 SWG HDBC earth lead with
washer, nuts, bolts etc. sunk upto under-mentioned depth and protection of earth lead by
12mm dia GI pipe upto plinth level run at a depth of 6.6m below G.L upto main board to be
earthed in/c necessary connecting copper sockets, bolts, nuts, in/c additional vertical run of
12mm dia GI pipe upto G.L. from 6.6m depth with blind socket for water pouring facility etc. all
complete for maintaining earth resistance within 1 ohm. Depth of main electrode at 35-40m
1)
1.000
2)
1.000
Supplying, fitting and fixing 250V capacitor type ceiling fan complete with concealed each
condensers, canopies and required length of rods, ceiling roses, wooden round blocks,
regulator, switches and required length of flexible wire etc. all complete as per drawings and
directions of the E-I-C. 1.422m sweep (best quality)
1)
40.000
2)
40.000
ELECTRICAL WIRING Concealed Conduit wiring: Concealed Conduit wiring for the following point
Points Looping at the Switch board with earth terminal including Circuit wiring with 1c-2x1.5
Sq.mm PVC insulated stranded cable (BYA) & 1.5 mm rm (green) PVC insulated stranded
ECC wire (BYA) through PVC conduit (Aziz or equivalent) of 25 mm inner dia wall thickness
1.5 mm, 18 SWG GP Sheet, switch board & Pull box with 3mm thick ebonite sheet cover,
brass contact, ceiling rose, fixing materials & all other accessories as required including
mending
the damages: Manufacturer of cable Eastern/ BRB/Citizen/Paradise/Poly
cable/Super sign/EVANA or equivalent according to the specification & direction of the
Engineer- in-charge. 2-pin 5 amps socket (outlet)
1)
20.000
2)
20.000
Supplying, fitting and fixing 150mm dia globe light complete with one way tumbler switch for
corridor and porch lighting. The light is to be installed on teak wood board and each lamp
operated by one way switch as per drawings and directions of the E-I-C.
1)
36.000
set
100 of 185
Quoted Rate
In Figure
In Word
(Tk)
68.000
1,368.62
Total
4.000
9,107.63
2.000
14,335.56
80.000
3,879.74
40.000
1,090.25
72.000
673.67
(Tk)
Item
Description of Item
Unit
No.
95 Supplying, fitting and fixing 150mm dia globe light complete with one way tumbler switch for set
corridor and porch lighting. The light is to be installed on teak wood board and each lamp
operated by one way switch as per drawings and directions of the E-I-C.
96
Supplying, fitting and fixing metal plated fancy bracket, holder and fancy shade etc. complete. set
The light is to be installed on teak wood board and each lamp operated by one way tumbler
switch as per drawings and directions of the E-I-C.
Quantity
Break up
2)
36.000
1)
12.000
2)
12.000
101 of 185
Quoted Rate
Total
72.000
24.000
In Figure
In Word
673.67
(Tk)
437.01
(Tk)
Item
No.
97
Quantity
Description of Item
Unit
Break up
Supplying, fitting and fixing water tight bracket light with double concealed reflector, brass set
holder, 25mm dia GI pipe bracket, J type glass shade etc. complete as per drawings and
directions of the E-I-C. Each lamp is to be operated by one way tumbler switch.
1)
14.000
2)
14.000
Supplying, fitting and fixing 1.22m long 40 watt fluorescent tube light with necessary superior set
quality ballast, starter, condenser, holders, 18 SWG sheet steel stove enamel base, etc. all
complete as per drawing and directions of the E-I-C. Each lamp is to be operated by one way
switch. (Eastern or prior approved quality)
1)
26.000
2)
26.000
Supplying, fitting and fixing the following electric lamp for garden/gate/room light and different each
places as per directions of the E-I-C. Energy Savings Lamp (CLF) 9 watt lamps B-22/E-27
CDL
1)
70.000
2)
70.000
each
1)
2.000
2)
2.000
1)
14.000
2)
14.000
1)
8.000
2)
8.000
103 Supplying, fitting and fixing switch board which to be concealed in the wall and to be made by each
22 SWG thick steel sheet metal and ebonite sheets for fixing the piano type hand regulators,
switches, etc on switch board all complete as per direction of E.I.C, 190mm x200mmx 50mm
(SB-06)
1)
10.000
2)
10.000
104 Supplying, fitting and fixing switch board which to be concealed in the wall and to be made by each
22 SWG thick steel sheet metal and ebonite sheets for fixing the piano type hand regulators,
switches, etc on switch board all complete as per direction of E.I.C, 80mm x65mmx50mm
(SB-08/SB-09/SB-10/SB-11)
1)
80.000
2)
80.000
105 Supplying, fitting and fixing switch board which to be concealed in the wall and to be made by each
22 SWG thick steel sheet metal and ebonite sheets for fixing the piano type hand regulators,
switches, etc on switch board all complete as per direction of E.I.C, 140mmx65mmx50mm
(SB-04)
1)
16.000
2)
16.000
98
99
100
Providing and fixing 230V, 50Hz, single phase, 10-40 Amps, Electronics Digital energy meter
(KWH meter) steel body with glass cover on prepared board (Bemco / Citizen / Electro / Hay /
Hosaf / Jamuna / Meghna / Padma / Prime / Solar) meter or equivalent foreign made as per
approved by the E-I-C.
101
each
Providing and fixing 230V, 50Hz, single phase, 10-40 Amps, Electronics Digital energy meter
(KWH meter) steel body with glass cover on prepared board (Bemco / Citizen / Electro / Hay /
Hosaf / Jamuna / Meghna / Padma / Prime / Solar) meter or equivalent foreign made as per
approved by the E-I-C.
102 Supplying, fitting and fixing switch board which to be concealed in the wall and to be made by each
22 SWG thick steel sheet metal and ebonite sheets for fixing the piano type hand regulators,
switches, etc on switch board all complete as per direction of E.I.C, 220mm x200mmx 50mm
(SB-05)
102 of 185
Quoted Rate
In Figure
In Word
(Tk)
28.000
1,758.06
Total
52.000
881.53
140.000
316.17
4.000
2,358.86
28.000
257.40
16.000
181.35
20.000
134.55
160.000
23.40
32.000
46.80
(Tk)
Item
No.
Quantity
Description of Item
Unit
106 Solar Panel: Supply and complete installation of 170W solar cyclone shelter solution each
comprising of 2 nos 85Wp PV module solar panels, 2 nos 12V, 130 AH (Industrial type)
Battery, 1no. 15A charge controller with all battery, accessories, cable and installation
accessories and 2 sets of module mounting structure for running 14+(6 spare) nos.
Fluorescent Tube Light (7.5 watt each) for 4 hours per day with 3 day autonomy (16 hours)for
extreme weather condition. Recommended Manufacturer of Solar Panel is
RAHIMAFROOZ/GRAMEEN SHAKTI or equivalent, but manufacturer of battery must be
RAHIMAFROOZ/GRAMEEN SHAKTI or equivalent. The system to be designed with 3 days
battery backup and it should have built-in automatic voltage regulator (AVR), overload
protection, low voltage protection, automatic charge controller, short circuit protection fuse
and LED control display. The item should include solar panel, battery, inverter and casing,
specially designed fulerlight and charge controller. Work also includes wiring, switch boxes
and light fixture. The system should be covered under 20 years warranty for solar panel, 3
years warranty for battery, inverter, charger and misc. items and 1 year free service warranty
at site. All works to be done as per drawing, specification and as per direction of E-I-C.
Break up
1)
1.000
2)
1.000
1)
100.000
2)
100.000
1)
100.000
2)
100.000
1)
104.000
2)
104.000
1)
96.000
Quoted Rate
In Figure
In Word
(Tk)
2.000
200,000.00
Total
108 Boring by using 100mm dia cutter and 38mm dia GI Pipe and other equipment capable of
drilling up to a depth of 500m by water jet system through all sorts of strata, protection of
caving by supplying necessary casing pipe, collection of soil samples at every 3m interval and
at every change of strata and preserve them for analysis, withdrawal of boring pipes & casing
pipes etc. all complete as per specification and direction of the E-I-C. From 50m to 100m =
50m
109 Boring by using 100mm dia cutter and 38mm dia GI Pipe and other equipment capable of
drilling up to a depth of 500m by water jet system through all sorts of strata, protection of
caving by supplying necessary casing pipe, collection of soil samples at every 3m interval and
at every change of strata and preserve them for analysis, withdrawal of boring pipes & casing
pipes etc. all complete as per specification and direction of the E-I-C. From 100m to 152m =
52m
110 Boring by using 100mm dia cutter and 38mm dia GI Pipe and other equipment capable of
drilling up to a depth of 500m by water jet system through all sorts of strata, protection of
caving by supplying necessary casing pipe, collection of soil samples at every 3m interval and
at every change of strata and preserve them for analysis, withdrawal of boring pipes & casing
pipes etc. all complete as per specification and direction of the E-I-C. From 152m to 200m =
48m
103 of 185
200.000
123.98
200.000
136.38
208.000
150.01
192.000
164.89
(Tk)
Item
Description of Item
Unit
110
No. Boring by using 100mm dia cutter and 38mm dia GI Pipe and other equipment capable of m
drilling up to a depth of 500m by water jet system through all sorts of strata, protection of
caving by supplying necessary casing pipe, collection of soil samples at every 3m interval and
at every change of strata and preserve them for analysis, withdrawal of boring pipes & casing
pipes etc. all complete as per specification and direction of the E-I-C. From 152m to 200m =
48m
Quantity
Break up
2)
104 of 185
96.000
Quoted Rate
192.000 In Figure 164.89 In Word
Total
(Tk)
(Tk)
Item
No.
Quantity
Description of Item
111 Boring by using 100mm dia cutter and 38mm dia GI Pipe and other equipment capable of
drilling up to a depth of 500m by water jet system through all sorts of strata, protection of
caving by supplying necessary casing pipe, collection of soil samples at every 3m interval and
at every change of strata and preserve them for analysis, withdrawal of boring pipes & casing
pipes etc. all complete as per specification and direction of the E-I-C. From 200m to 250m =
50m
Unit
m
Break up
1)
100.000
2)
100.000
112 Boring by using 100mm dia cutter and 38mm dia GI Pipe and other equipment capable of each
drilling up to a depth of 500m by water jet system through all sorts of strata, protection of
caving by supplying necessary casing pipe, collection of soil samples at every 3m interval and
at every change of strata and preserve them for analysis, withdrawal of boring pipes & casing
pipes etc. all complete as per specification and direction of the E-I-C. Beyond 250m
1)
500.000
2)
500.000
113 Supplying and lowering 38mm dia water grade PVC pipe having wall thickness 2.5m to
3.0mm (D Class Aziz pipe/equivalent), PVC sand trap of length 3.0m with cap, PVC strainer
of desired slot installing at the middle of the most suitable water bearing strata. 38mm dia GI
pipe of best quality of length 1.52m with MS welded flat bar on each side to prevent from
rotation up to the desired depth, fitting fixing the hand pump No. 6 etc. including the cost of
solvent cement, socket adapter, filling medium sand up to 18.0m above strainer and the
remaining portion with available soil from boring etc. all complete as per standard
specification and direction of the E-I-C Hand pump No. 6 complete set (EPL/RFL)
(Medium)/equivalent brand)
1)
2.000
2)
2.000
114 Supplying and lowering 38mm dia water grade PVC pipe having wall thickness 2.5m to
3.0mm (D Class Aziz pipe/equivalent), PVC sand trap of length 3.0m with cap, PVC strainer
of desired slot installing at the middle of the most suitable water bearing strata. 38mm dia GI
pipe of best quality of length 1.52m with MS welded flat bar on each side to prevent from
rotation up to the desired depth, fitting fixing the hand pump No. 6 etc. including the cost of
solvent cement, socket adapter, filling medium sand up to 18.0m above strainer and the
remaining portion with available soil from boring etc. all complete as per standard
specification and direction of the E-I-C 38mm dia GI pipe 2.9mm thick (National
Tubes/equivalent)
1)
50.000
2)
50.000
115 Supplying and lowering 38mm dia water grade PVC pipe having wall thickness 2.5m to
3.0mm (D Class Aziz pipe/equivalent), PVC sand trap of length 3.0m with cap, PVC strainer
of desired slot installing at the middle of the most suitable water bearing strata. 38mm dia GI
pipe of best quality of length 1.52m with MS welded flat bar on each side to prevent from
rotation up to the desired depth, fitting fixing the hand pump No. 6 etc. including the cost of
solvent cement, socket adapter, filling medium sand up to 18.0m above strainer and the
remaining portion with available soil from boring etc. all complete as per standard
specification and direction of the E-I-C 38mm dia water graded PVC pipe having thickness
2.5-3.00mm (D class Aziz brand/equivalent) pipe sand trap
1)
400.000
105 of 185
Quoted Rate
In Figure
In Word
(Tk)
200.000
181.01
Total
1,000.000
198.36
4.000
3,059.03
100.000
649.01
800.000
117.11
(Tk)
Item
Description of Item
Unit
No.
115 Supplying and lowering 38mm dia water grade PVC pipe having wall thickness 2.5m to m
3.0mm (D Class Aziz pipe/equivalent), PVC sand trap of length 3.0m with cap, PVC strainer
of desired slot installing at the middle of the most suitable water bearing strata. 38mm dia GI
pipe of best quality of length 1.52m with MS welded flat bar on each side to prevent from
rotation up to the desired depth, fitting fixing the hand pump No. 6 etc. including the cost of
solvent cement, socket adapter, filling medium sand up to 18.0m above strainer and the
remaining portion with available soil from boring etc. all complete as per standard
specification and direction of the E-I-C 38mm dia water graded PVC pipe having thickness
2.5-3.00mm (D class Aziz brand/equivalent) pipe sand trap
Quantity
Break up
2)
106 of 185
400.000
Quoted Rate
Total
800.000
In Figure
In Word
117.11
(Tk)
(Tk)
Item
No.
Quantity
Description of Item
116 Supplying and lowering 38mm dia water grade PVC pipe having wall thickness 2.5m to
3.0mm (D Class Aziz pipe/equivalent), PVC sand trap of length 3.0m with cap, PVC strainer
of desired slot installing at the middle of the most suitable water bearing strata. 38mm dia GI
pipe of best quality of length 1.52m with MS welded flat bar on each side to prevent from
rotation up to the desired depth, fitting fixing the hand pump No. 6 etc. including the cost of
solvent cement, socket adapter, filling medium sand up to 18.0m above strainer and the
remaining portion with available soil from boring etc. all complete as per standard
specification and direction of the E-I-C 38mm dia water graded PVC strainer having thickness
2.5 3.0mm (D class Aziz brand/equivalent) of recommended slot size
Unit
m
Break up
1)
24.400
2)
24.400
117 Supplying and lowering 38mm dia water grade PVC pipe having wall thickness 2.5m to each
3.0mm (D Class Aziz pipe/equivalent), PVC sand trap of length 3.0m with cap, PVC strainer
of desired slot installing at the middle of the most suitable water bearing strata. 38mm dia GI
pipe of best quality of length 1.52m with MS welded flat bar on each side to prevent from
rotation up to the desired depth, fitting fixing the hand pump No. 6 etc. including the cost of
solvent cement, socket adapter, filling medium sand up to 18.0m above strainer and the
remaining portion with available soil from boring etc. all complete as per standard
specification and direction of the E-I-C Best quality 38mm dia PVC cap
1)
2.000
2)
2.000
118 Furnishing design of the production well by testing of water and soil samples collected from each
the observation well in/c test for 'Arsenic' etc. all complete as per direction of the E-I-c.
(excluding the cost of actual fees for testing which will be paid by to the contractor separately
by the department)
1)
2.000
2)
2.000
119 Construction of platform of size 1.4mx1.0m as per drawing with 75mm thick Cement Concrete
(1:2:4) over a layer of brick flat soling and providing 125mmx75mm brick band all around in/c
finished with 12mm thick cement plaster (1:4) with neat cement finishing, providing outlet
drain up to 1m long, etc. all complete as per direction of the E-I-C.
1)
2.000
2)
2.000
107 of 185
Quoted Rate
In Figure
In Word
(Tk)
48.800
116.14
Total
4.000
60.01
4.000
250.00
4.000
4,782.89
(Tk)
Item
No.
Quantity
Description of Item
Unit
Break up
Quoted Rate
Total
In Figure
(Tk)
1)
84.000
2)
84.000
108 of 185
168.000
12,577.50
In Word
(Tk)
Item
No.
121
Quantity
Description of Item
Unit
Break up
1)
10.000
2)
10.000
122 "Teacher's Chair: Size 560mmX533mmX 863mm(H): Chair frame will be made of 22mm each
(inner) M.S. pipe (outer diameter 25mm wall thickness 1.5mm) and 25mm X 3mm M.S. Flat
bar.Chair shell to be made with both side finished fiber glass. The chair sample must be
prepared according to design & drawings and to be approved by Executive Engineer, LGED
before production.
1)
22.000
2)
22.000
123 Supplying best quality Secretariat Table (Size: 1.52m x1.07mx0.76m) made of best quality each
well matured, fully seasoned Chittagong Teak wood (timber should be sapless) in/c superior
quality varnishing/French polishing, best quality rexin topping and finishing, etc. all complete
as per design (if provided) and direction of the E-I-C. (This item includes all fittings, fixings
and delivering the furniture at the instructed place).
1)
2.000
2)
2.000
124 Supplying best quality Tea Table of standard size made of best quality well matured, fully each
seasoned jack wood (timber should be sapless) in/c superior quality varnishing/French
polishing and finishing, etc. all complete as per design (if provided) and direction of the E-I-C.
(This item includes all fittings, fixings and delivering the furniture at the instructed place).
1)
2.000
2)
2.000
125 Supplying best quality armed Chair (wooden sit and back) of standard size, made of
each
best quality well matured, fully seasoned jack wood (timber should be sapless) in/c superior
quality varnishing/ French polishing and finishing, etc. all complete as per design (if provided)
and direction of the E-I-C. (This item includes delivering the furniture at the instructed place).
1)
2.000
2)
2.000
126 Steel Almirah: , Manufacturing and supplying of steel almirah of size 6'-0''x3'-0''x2'-3'' made of each
18 BWG M.S sheet at front and two parallel sides and 20 BWG M.S sheet at back side as per
approved design and specifications including the cost of painting with synthetic enamal spray
painting including welding, plane surfacing, denting, points, fitting & fixing with standard lock
with two keys and also lock in the drawers etc all complete as per direction of E/C
1)
4.000
109 of 185
Quoted Rate
In Figure
In Word
(Tk)
20.000
6,435.00
Total
44.000
3,627.00
4.000
24,795.58
4.000
3,719.34
4.000
6,818.78
8.000
11,700.00
(Tk)
Item
Description of Item
Unit
No. Steel Almirah: , Manufacturing and supplying of steel almirah of size 6'-0''x3'-0''x2'-3'' made of each
126
18 BWG M.S sheet at front and two parallel sides and 20 BWG M.S sheet at back side as per
approved design and specifications including the cost of painting with synthetic enamal spray
painting including welding, plane surfacing, denting, points, fitting & fixing with standard lock
with two keys and also lock in the drawers etc all complete as per direction of E/C
Quantity
Break up
2)
110 of 185
4.000
Quoted Rate
Total8.000
In Figure
In Word
11,700.00
(Tk)
(Tk)
Item
No.
Quantity
Description of Item
Unit
Break up
Quoted Rate
Total
In Figure
(Tk)
each
128 Overall environmental management in addition to compliance to the clauses PCC 2.3
(j) & AppendixA (IEE) to the entire satisfaction of E-I-C.
b) Dust suppression measure to the entire satisfaction of the Engineer.
each
129 Overall environmental management in addition to compliance to the clauses PCC 2.3
(j) & AppendixA (IEE) to the entire satisfaction of E-I-C.
C) Environmental Monitoring.
each
1)
1.000
124,793.00
2.000
15,000.00
1.000
403,200.00
2)
1)
1.000
2)
1.000
1)
2)
111 of 185
In Word
(Tk)
OMT
20,000.00
120000.00
641,434.88
320,717.44
112 of 185
320,717.44
113 of 185
2,207,251.20
3,310,876.80
156,212.16
78,106.08
78,106.08
351,466.77
175,733.38
175,733.38
1,121,091.85
517,392.12
603,699.73
100,674.10
44,705.06
55,969.04
114 of 185
134,245.27
201,367.91
433,568.92
216,784.46
216,784.46
96,120.97
46,991.87
49,129.10
21,385.50
9,905.17
11,480.32
121,091.58
59,732.04
61,359.55
88,209.34
44,104.67
44,104.67
22,832,964.60
10,493,683.42
12,339,281.18
896,270.61
416,988.14
115 of 185
896,270.61
Amount in Figure
(Tk)
479,282.47
116 of 185
29,086.48
29,086.48
621,022.54
310,511.27
310,511.27
1,353,459.32
676,729.66
676,729.66
663,976.83
331,988.41
331,988.41
1,454,770.50
727,385.25
117 of 185
Amount in 1,454,770.50
Figure (Tk)
727,385.25
118 of 185
225,972.64
225,972.64
121,803.83
60,901.92
60,901.92
115,140.24
57,570.12
57,570.12
301,519.41
150,759.71
150,759.71
119 of 185
40,258.40
40,258.40
887,407.76
443,703.88
443,703.88
1,932,662.75
966,331.38
966,331.38
492,252.32
246,126.16
246,126.16
29,593.14
9,521.79
20,071.35
71,143.60
35,571.80
35,571.80
120 of 185
343,199.86
343,199.86
121 of 185
106,975.34
106,975.34
454,457.60
227,228.80
227,228.80
52,373.63
26,186.81
26,186.81
475,076.70
235,900.82
239,175.88
2,207,818.59
1,103,909.29
1,103,909.29
276,310.52
138,155.26
138,155.26
1,129,880.24
564,940.12
564,940.12
122 of 185
394,688.02
394,688.02
24,423.16
12,211.58
12,211.58
158,945.27
79,472.64
79,472.64
1,282,994.37
641,497.19
641,497.19
123 of 185
15,442.67
15,442.67
1,222,105.91
611,052.95
611,052.95
3,569,299.47
1,784,649.73
1,784,649.73
124 of 185
80,441.50
80,441.50
284,535.25
142,267.62
142,267.62
1,186,067.18
593,033.59
593,033.59
125 of 185
308,068.70
308,068.70
20,373.97
10,186.99
10,186.99
2,340.00
1,170.00
1,170.00
30,000.00
15,000.00
15,000.00
6,658.40
3,329.20
3,329.20
126 of 185
4,791.96
4,791.96
92,438.82
46,219.41
46,219.41
127 of 185
1,116.93
1,116.93
10,000.00
5,000.00
5,000.00
706,003.20
176,500.80
529,502.40
64,036.00
25,614.40
38,421.60
128 of 185
4,155,150.55
6,281,041.53
67551400.08
30,932,161.93
36,619,238.15
67,551,400.08
148829.52
43565.16
129 of 185
21330.32
41370.56
51713.20
6387.36
14777.62
15299.76
23848.44
15115.44
130 of 185
15115.44
131 of 185
27485.00
26044.00
68122.16
6352.64
4154.80
118989.00
132 of 185
118989.00
133 of 185
19266.71
22911.28
70789.14
19385.24
380497.46
134 of 185
380497.46
135 of 185
35100.00
100998.60
186768.32
16662.62
1485764.35
7,334.48
264,182.08
482,816.60
136 of 185
36,430.52
28,671.12
310,379.20
43,610.00
48,504.24
137 of 185
10,488.24
138 of 185
45,839.56
44,263.80
9,435.44
7,207.20
2,901.60
2,691.00
3,744.00
1,497.60
139 of 185
1892288.52
24,796.00
27,276.00
31,202.08
31,658.88
140 of 185
Amount in Figure
(Tk)
31,658.88
141 of 185
198,360.00
12,236.12
64,901.00
93,688.00
142 of 185
143 of 185
240.04
1,000.00
19,131.56
546359.31
144 of 185
2,113,020.00
145 of 185
159,588.00
99,182.32
14,877.36
27,275.12
93,600.00
146 of 185
147 of 185
2636242.80
124,793.00
30,000.00
403,200.00
557,993.00
74,790,048.06
148 of 185
149 of 185
150 of 185
151 of 185
152 of 185
153 of 185
154 of 185
155 of 185
156 of 185
157 of 185
158 of 185
159 of 185
160 of 185
161 of 185
162 of 185
163 of 185
164 of 185
165 of 185
166 of 185
167 of 185
168 of 185
169 of 185
170 of 185
171 of 185
172 of 185
173 of 185
174 of 185
175 of 185
176 of 185
177 of 185
178 of 185
179 of 185
180 of 185
181 of 185
182 of 185
183 of 185
184 of 185
185 of 185