Professional Documents
Culture Documents
Page 1 of 33
Remote Identification (Drive Firmware): Login to the RMU and select drive. The
drive firmware level (Firmware Revision) is the fifth item in the Drive information. From
other screens in the RMU, you can get back to the drive firmware level by selecting
Information and Drive
Page 2 of 33
Physical Location: The shipping label contains the library and drive firmware levels at
the time of shipment. If your product is not new, please go to the operator panel.
Page 3 of 33
Page 4 of 33
Page 5 of 33
Page 6 of 33
Page 7 of 33
Drive FW: Go to the RMU Firmware tab. If not logged in, enter your login name
and password (the default login is admin and the default password is secure) and
select submit. The current drive FW version is displayed in the circles below (25D4).
Page 8 of 33
SNC 4000 Version: Open the AMC client. If not logged in, enter your login name
and password (the default login is admin and the default password is password)
and select submit. The SNC firmware version is circled below.
AMC for the SC24: Open the AMC client. If not logged in, enter your login name
and password (the default login is admin and the default password is password)
and select submit.
Page 9 of 33
.
Using the Operator Panel (Library, Drives and RMU):
Page 10 of 33
5. Push the up/down buttons to locate the library (application), drive # and RMU FW
versions
Page 11 of 33
Drive FW: Go to the RMU Firmware tab. If not logged in, enter your login name
and password (the default login is admin and the default password is secure) and
select submit. The current drive FW version is displayed in the circles below (25D4).
Page 12 of 33
SNC Version: Open the AMC client. If not logged in, enter your login name and
password (the default login is admin and the default password is password) and
select submit. The AMC firmware version is circled below.
AMC for the SC100: Open the AMC client. If not logged in, enter your login name
and password (the default login is admin and the default password is password)
and select submit.
Page 13 of 33
Physical Location: The shipping label contains the library and drive firmware levels at
the time of shipment. If your product is not new, please use the RMU or operator
panel.
1. Select More
2. Select About
Page 14 of 33
6. Select Details until RMU Firmware is displayed. Note: The drive App and boot
code are not the drive firmware version. See below to find drive firmware:
For Drive Firmware Versions
1. Select Status
2. Select Drives
3. Drive Firmware circled. Select Change Drive for info on additional drives.
Scalar 218 (Library):
Remote Identification: No remote identification options
Physical Location: No physical listing of the Firmware Version
Using the Operator Panel:
Page 15 of 33
Page 16 of 33
Page 17 of 33
Drive FW: Only available off the Operator Panel. See Using the Operator Panel
section below. The same sequesnce can be used for the RMU.
SNC Version: Open the AMC client. If not logged in, enter your login name and
password (the default login is admin and the default password is password) and
select submit. The AMC firmware version is circled below.
Page 18 of 33
AMC for the SC1000: Open the AMC client. If not logged in, enter your login name
and password (the default login is admin and the default password is password)
and select submit.
1. Select ENTER
Page 19 of 33
Page 20 of 33
Page 21 of 33
Page 22 of 33
Drive FW: Only available off the Operator Panel. See Using the Operator Panel
section below. The same sequesnce can be used for the RMU.
SNC Version: Open the AMC client. If not logged in, enter your login name and
password (the default login is admin and the default password is password) and
select submit. The AMC firmware version is circled below.
Page 23 of 33
AMC for the SC10K: Open the AMC client. If not logged in, enter your login name and
password (the default login is admin and the default password is password) and
select submit.
Page 24 of 33
1. Select ENTER
Page 25 of 33
1. Select ENTER
Page 26 of 33
Page 27 of 33
Page 28 of 33
1. Select Tools and System Configurations for the SNC firmware and About
Pathlight for the library firmware.
Page 29 of 33
Page 30 of 33
Page 31 of 33
Page 32 of 33
Data Manager
From the command line run the command /etc/dm/usr/utils/dm_version
Example:
# /etc/dm/usr/utils/dm_version
System information: SunOS brutus 5.6 Generic_105181-23 sun4u sparc SUNW,Ultra-1
DataMgr software Version 3.5.1, Revision 4
DataMgr DMFS Driver version 3.5.1, Device major number 143
DataMgr software serial number: 123
DataMgr software authorization string: H747GJLMNPUV6K4U6RFW56Q
#
FileServ
From the command line run the command fsversion
Example:
# fsversion
FS0418 29 141884 fsversion completed: Current FileServ software version is 4.4.2
#
VolServ
On the vswin GUI screen select Options -> Copyright
Scalar DLC
Login as administrator
On the bottom of the windows screen right click on the 3 penguins and then click
About
Page 33 of 33