Professional Documents
Culture Documents
PART - I
Qty Units Rates Rate in words Amount
Rs.
Rs.
Rs.
No. Particular
I
CIVIL WORKS
1
a
DISMENTALLING
Dismentalling existing walls(4.5" to 10" thickness), and
disposing the debris to directed lead, including all material,
labour and transportation complete in all respects.
Dismentalling existing flooring/ tiles/ plaster / any other
horizontal / vertical surface, to the required/ directed depth, and
disposing away the debris to directed lead.
2
a
200 sqft
500 sqft
FLOORING
prividing and laying of 600 x 600 mm wooden series, digital 1500 sqft
GVT tiles (real wood finish) of Kajaria make, approved color
and pattern, or approved equivalent in RAK/ Restile. The item to
include all materiral, fixing, scaffolding, labour etc. complete in
all respects. tiles to be fixed on existing flooring, with tile fixing
admixture(of pidilite or eqvivalent make. the pointing to be done
with the water proofing grout of matching color and of below
mentioned make. Slope to be maintained as directed. item to
include fixing of skirting on walls of approx. 75 mm height.
complete area to be measured in sqft(including skirting) the cost
to include removing the existing skirting/ flooring as needed/
directed at places (if needed).
Makes: Kajaria/ RAK / Restile
P/F 8.50 mm (minimum) thick full body vitrified polished dirt 3200 sqft
free tiles of size 800x800 mm of "The Square" PGVT, HIgh
gloss/ MATT/ Lapato finish, range of Kajaria "Restile/
Kajaria/ NItco make or equivalent , of approved color and
pattern in the flooring.The tiles are to be fixed over existing
flooring, with tile fixing admixture(of pidilite or eqvivalent
make)/ on a cementbed with neat cement slurry. The flooring to
be done in one/ two colors, and providing the filling of joints by
water proofing grout of matching color(fevimate, roofie, untile or
equivalent make), specially for adhesive with graded granules,
polymer and stable pigment fine finished including cleaning of
joints etc. the slope of the floor to be mantained as directed on
site. A skirting of 75 mm (or as directed) height also to be
provided along the walls. the cost to include removing the
existing skirting/ flooring as needed/ directed at places (if
needed).
Note:- Area of all the flooring including skirting, to be measured
in square feet
Makes: Kajaria/ RAK / Restile
Page 1 of 13
PART - I
Qty Units Rates Rate in words Amount
Rs.
Rs.
Rs.
400 sqft
Providing & fixing DADO with 300x600 Joint free digital 1250 sqft
ceramic tiles Kajaria/ RAK/ Nitco make in one or more shades
with combination of 75 wide border and 20mm pencil at 1220
level. The item includes fixing tiles including filling joints with
white cement mixed with colour pigment to match the colour of
tiles. The cost of pencil and highlighters to be paid extra if any.
Makes: Kajaria/ RAK / Nitco
3
a
Misc. Works
Providing and making 115 thk. Brick wall with bricks(class 270
designate 75) in cement mortar 1:5 (1 part cement : 5 part coarse
sand) The item includes providing 2 no of 6mm reinforcement
bars after every third course. the rate to include providing and
fixing stone slab lintels/ space for doors etc. and cost of
scaffolding etc. complete, as required on site / directed. the cost
to include curing of the walls for at least 7 days (cement :Ambuja/ JK super approved grade.)
50
50
Page 2 of 13
sqft
sqft
rft
rft
No. Particular
d
Nos
Providing and fixing 600mm long C.P. Towel Rods of (Jaquar:model- ACN-1111NM, SINGLE TOWEL RAIL 600 mm long /
approved equivalent)
Nos
Nos
Nos.
Nos.
Nos.
Nos
Providing and fixing FLAT BACK URINAL with auto sensorsHINDUSTAN make (white colour) with cistern down take pipe,
concealed cock, complete, and of approved model. (make: Hindware Italian collection(Enigma M sence- 96004) /
approved equivalent)
Nos
3150 sqft
Page 3 of 13
No. Particular
The ceiling shall be of plain gypsum sheets using GI framework.
It will be provided in combination with Armstrong ceiling for
entire Bank except in the nonbanking areas (i.e. record room,
stationary room, strong room, ups etc), and as per the given
design.
b The thickness of the gypboard sheet will be 12.5mm minimum.
The framework shall consist of GI channel framework. The
perimeter channel will be of 24 to 26 gauge having one flange of
20mm and other 30mm and web 27mm along the perimeter of the
ceiling. It shall be screw fixed to brick wall with the help of rawl
plug of dimension 38mmx12mm dia. fixed into the soffit at
610mm centers.
c The intermediate channels of size 45mmx0.9mm thick with two
flanges of 15mm each shall be suspended from ceiling using
angle of size 25mmx10mmx0.55mm spaced not more than
1220mm c/c which are fixed to soffit with GI
27mmx37mmx25mmx1.6mm cleat and steel expansion fasteners.
Ceiling section of 0.55mm thickness having curled web of 80mm
and two flanges of 26mm are fixed to intermediate channel with
the help of connecting clip of 2.64mm dia. in the direction
perpendicular to intermediate channel at 457mm center to center.
a
Page 4 of 13
sqft
No. Particular
III
1
a
b
sqft
PARTITIONS
1000 sqft
FULL HT. DOUBLE SKIN PLAIN WOODEN
PARTITION WITHOUT GLAZING
Providing and fixing full height double skin wooden partitions
60 mm thick with following specifications.
Providing frame of hardwood of section 46 mm X 46 mm
(finished) comprising of horizontals and verticals at, 600 mm c/c
or part thereof , vertically and horizontally fixed firmly to walls
/ floors / RCC roof etc. Alternate vertical members to go upto
RCC ceiling and firmly fixed.
Providing 8 mm thk. Commercial grade plywood of approved
make , finished / fixed with 1 mm thick laminate of approved
make & shade fixed with adhesive , fixed on both sides of the
partition framework. The laminate to be fixed with adhesive on
both sides of the partition upto False ceiling level .
All concealed wooden surfaces of frame are to be painted with
anti- termite chemical emulsion as manufactured by fevicol
industries i.e. terminator brand or equivalent.
A teak wood melamine polished beading to be provided at the
junction of partition with the ceiling/ false ceiling.
Page 5 of 13
No. Particular
f
f
g
450
sqft
500
sqft
Page 6 of 13
No. Particular
5
sqft
350
3M / approved equivalent make anti shatter / safety film
P/f anti shatter / safety film as manufactured by 3M/ Garware,
and as per manufacturer's instructions.
The contractor has to produce a certificate from the manufacturer
that the film is genuine and is applied as per manufacturer's
instructions, in the prescribed format.
sqft
648
WALL/ PILLAR PANELLING
do -- as above in full height partition but Providing and fixing
1.00mm thick approved laminate for panelling on wall with one
groove at skirting level and other joints and grooves as directed
including 8 mm thick. Plywood backing on 46 x 25mm(finished)
hardwood frame at 450 c/c both ways etc. complete as directed.
sqft
Page 7 of 13
650
sqft
No. Particular
Fixed portion :- Providing and fixing at site Full glass partition
in patchfittings (Dorma ), glass panels of 12.0mm toughened
float glass with proper fixing in wooden members in top, and in
floor in bottom. Gaps to be filled with help of silicon.
Doors: - P/f full glass door out of 12 mm thick toughened float 200
glass, in patchfittings, and with heavy duty floor spring with SS
cover plate. The doors to be provided with locking arrangement
in patchfittings as well as ss 40mm dia, and approx. 600 mm long
approved model handles.
sqft
90
sqft
Cabin doors
Door frames shall be made out of 3X2 (clear) teak wood. The
wood should be free of knots and proper rebates and grooves
should be made before fixing. The frame members should be in
single piece of wood. The flush door should be 32mm thick
nondecorative type with block board core of wood strips and
frame of 1st class hard wood and finished with 1mm thick
Laminate on both sides, as per drwg. Refer schedule for
interiors, furniture & finishes for wooden flush door and
laminate specifications. The flush door should have teak wood
beading with melamine polish all around. Only ISI marked flush
doors should be used. The door shall include 8 mm glass with
etching as per design. The glass shall be supported with teak
wood beading and melamine polished.
Stoppers should be provided at skirting level to prevent the door
from hitting the wall. Cylindrical lock cum handle to be provided
in the flush door. SS heavy duty hinges to be used for fixing the
door to the frame. Door stopper at bottom to be provided also SS
Hydraulic door closer to be provided in each door. Refer
schedule of interiors, furniture & finishes.
STORAGES
480
1 Storages (all heights) modular
Storage cabinets, modular of width 600 mm / 750 mm / 900/
1200 mm (As per site condition), depth 450 mm and height of
1135 mm shall be provided. The back grid of the storages should
match exactly with the grid of the partition.
Note:- elevation area to be measured for payment
2 FRONT COVER TO EXISTING STORAGES
Page 8 of 13
950
sqft
sqft
No. Particular
P/f covering to existing storages, out of 19 mm thick block board
and necessary framework, all exposed edges to have lipping in
teak wood. Openable shutters, including all necessary hardware,
SS hinges, Locks, Handles, magnetic catchers, etc. complete. The
front exposed surfaces of the storage to be provided with 1.0 mm
thick lamnate, while the internal surfaces to be painted with 2
coats of synthetic enamel paint on 2 coats of primer and one coat
of putty, the shutters to be provided with the shelves, at max. 450
mm c/c in height, or part therof, as indicated on site, (vertical
devision)
Note:- elevation area to be measured for payment
VIII COUNTERS
1 Server Counter
Counter shall be made up of 19mm plywood finished with
1.00mm thick offwhite laminate. The counter shall be 2'0" wide
and will have 1 x1 beech wood edge post formed. Running
counter shall have Drawer unit comprising of two sliding drawers
on telescopic channels and bottom openable shutter with all
hardware as per schedule of interiors, furniture & finishes. The
inside of counter and drawer unit will be finished with two coats
of synthetic enamel paint and two coats of primer.
IX
rft
each
each
Page 9 of 13
No. Particular
a
5.5
set
of 4
each
Page 10 of 13
No. Particular
Providing and supplying Centre Table of size (1200mm x
600mm x450mm (H) having top made of 12mm thick beveled
glass and understructure made of 18mm thick pre-laminated
particle board and ss, and having all exposed edges sealed with
PVC edge banding tape complete. It should have a proper match
with the Sofa set provided.
Conference Table
Providing and fixing of Conference table, size 600 mm x
900mm(approx. per seat), rounded at the corners (as per design),
made up of 38mm MDF board duly laminated in the desired
shade. The table top will have hidden flip boxes for power and
electrical points. The lower half of the table is made of 25mm
thick MDF board duly laminated from both sides and post
formed.. the wire managers/ flip boxes to be provided at each
seat (900 mm approx.), the edges to be pastformed as per given
details/ instrcutions.
20
per
seat
125
4 Pin up boards
Supplying and fixing in position pin up boards, fabricated with
6mm ply covered with 12 mm soft board, padding, and
upholstered with fabric costing rs. 150/- per mtr. The edges of
soft wood to have Teak wood framing and moulding, melamine
polished.
sqft
500
5 Vertical Blinds (Vista )
Providing and fixing fabric slats of 4 wide as per schedule. It
will have bottom pockets for housing bottom weights coupled
together by means of endless bead chain pivotally attached as per
manufacturers specifications. The slats overlap should not be
less than 12mm. The slats movement will be on travelers
assembled and should include head channel, spline, shaft, slat
traveler, slat spacer links, tilt control, slat carriers, bottom
weights, linkage chains, channel mounting brackets, traversing
cord and fabric slats with all the necessary hardwares as per
schedule.
sqft
Page 11 of 13
sqft
No. Particular
each
each
22
each
20
each
Page 12 of 13
PART - I
Qty Units Rates Rate in words Amount
Rs.
Rs.
Rs.
20 each
15
each
16
per
seat
Cement
Vitrified floor tiles
Ceramic tiles
PVC Pipes
UPVC Pipes
Sanitay Fixtures
Toilet Accessories
Gypsum Board
Grid Ceiling System
Laminated wooded Floor
Note:- All other materials required for the work shall be complying with IS specifications and subject to approval
from Architect / Employer.
Page 13 of 13