Professional Documents
Culture Documents
1 2 3 4
Blackout M M M M SunScreen
(1) (2) (3) (4)
1 120VAC
(230VAC)
M
J J J J
IQ/MLC
12VDC
A/V RS-232 Interface(Optional)
System
A/V
System
Dry Contact
LECTURN
Local Local Master Control of
Group Group all motors on the circuit
Blackout Blackout
1&2 3&4
Room Darkening
Shown with the Single Channel
Electro/3 System
with Fascia and
End Caps Room Darkening
Double Channel
© Copyright 2004, MechoShade Systems, Inc., Long Island City, NY. DoubleShade, MechoShade, ElectroShade and ThermoVeil are registered trademarks of, and IMCS/2, Intelligent Motor Control System/2, IQ/MLC, LightSeal,
MLC, MLC/2 are trademarks of, MechoShade Systems, Inc. Specifications subject to change without notice.
http://SolarControlLLC.com
Solar Control, LLC | 888-550-4836
Shadecloth Guide
MECHOSHADE® ROOM DARKENING CHANNEL RECOMMENDATIONS
(per shadeband)
Single Channels, with Guides,
1- 5/16" (33mm) MECHO SINGLE SIDE CHANNEL AT DRIVE OR IDLE-END
for Drive-End and Idle-End
BRACKETS:
Applications
• With Battens: Up to a max. width of 10ft. and/or a max. height of 8ft.
• Without Battens: Up to a max. width of 7ft. and/or a max. height of 8ft. Blackout Shadecloth
• Where conditions exceed the above use the 2-1/2" ElectroShade Single Channel.
Exposed LightSeal Hembar TM
2-5/8" (67mm) MECHO DOUBLE CHANNEL USED WITH DRIVE OR IDLE-END Soft Vinyl Welt at the bottom
BRACKETS: Eliminates the need for a sill channel.
Available in 1-1/2" (38mm).
• With Battens: Up to a max. width of 10ft. and/or a max. height of 8ft.
• Without Battens: Up to a max. width of 7ft. and/or a max. height of 8ft.
MechoShade 1-5/16" (33mm) MechoShade / ElectroShade
• Where conditions exceed the above use the 5" ElectroShade Double Channel.
Single Channel 2-1/2" (64mm) Single Channel
2-5/8" (67mm) MECHO DOUBLE CHANNEL AT CENTER SUPPORT BRACKETS:
Shadecloth Shadecloth
• With Battens: Up to a max. width of 10ft. and/or a max. height of 15ft. Guide
• Without Battens: Up to a max. width of 7ft. and/or a max. height of 15ft.
• Where conditions exceed the above, use the 5" ElectroShade Double Channel.
1-3/16" 11/16" 1-3/16" 11/16"
(30mm) (17mm) (30mm) (17mm)
ELECTROSHADE ROOM DARKENING CHANNEL RECOMMENDATIONS
®
(per shadeband)
1-5/16" 2 -1/2"
(33m) (64mm)
2-1/2" (64mm) ELECTRO SINGLE SIDE CHANNEL AT DRIVE OR IDLE-END
Section Plan
BRACKETS:
• With or Without Battens: Up to a max. width of 15ft. and/or max. height of 21ft.
• Where conditions exceed the above, call the factory.
Double Channel,with Guides,
5" ELECTRO DOUBLE CHANNEL USED WITH DRIVE OR IDLE-END BRACKETS: for Applications Between
• With or Without Battens: Up to a max. width of 15ft. and/or max. height of 21ft. Shades
• Where conditions exceed the above, call the factory.
5" (127mm) ELECTRO DOUBLE CHANNEL AT CENTER SUPPORT BRACKETS. 1-3/16" 11/16"
• With or Without Battens: Up to a max. width of 15ft. and/or max. height of 21ft. (30mm) (17mm)
© Copyright 2004, MechoShade Systems, Inc., Long Island City, NY.. MechoShade and ElectroShade are registered trademarks of, and LightSeal is a trademark of, MechoShade Systems, Inc.
Specifications subject to change without notice.
http://SolarControlLLC.com
Solar Control, LLC | 888-550-4836
2-3/4" (70mm)
3" (76mm)
1" 15/16"
(25mm) (24mm)
3-1/8"(79mm)
MAX. R.U.D. 2-3/8"
(60mm)
Blackout
ShadeCloth
7" (178mm)
Room Darkening
Channel Insert 3-5/8"(92mm) 9-1/2"
Guides MAX. R.U.D. 3-5/8" (241mm)
(optional) (92mm)
SunScreen
Optional
5113
Recessed
Single Channels, Pocket with
with Guides, Return Air
for Side Channel Option.
Drive-End and
Idle-End
applications
Optional
Room
Darkening
Side Optional
Channel Removable
Closure (White) Optional
Closure Mount
With Tile Support
(White)
3-1/2"
(89mm) 5" (127mm) 1-1/4"
(32mm)
8-1/2" (216mm)
Optional Exposed
LightSealTM Hembar with
Soft Vinyl Welt at the 9-3/4" (248mm)
bottom. Eliminates the need
for a sill channel. Available in
1-1/2" (38mm).
Shown is an Electro/1™ DoubleShade® #13 with Blackout and
SunScreens on a single bracket, Room Darkening Channels
and a 5113 Recessed Pocket with Closure and optional Return
Air openings, Closure Mount and Tile Support. which can then
be connected to a wide variety of control options for multi-level
control and A/V integration.
© Copyright 2004, MechoShade Systems, Inc., Long Island City, NY. MechoShade and ElectroShade and DoubleShade are registered trademarks of, and LightSeal is a trademark of, MechoShade Systems, Inc. Specifications
subject to change without notice.
http://SolarControlLLC.com
Solar Control, LLC | 888-550-4836
© Copyright 2004, MechoShade Systems, Inc., Long Island City, NY. MechoShade is a registered trademarks of, and Equinox and Quintessence are a trademark of MechoShade Systems, Inc. Flocké is a trademark of its
respective company. Specifications subject to change without notice.
http://SolarControlLLC.com
Solar Control, LLC | 888-550-4836
The A/V contractor provides 2 pole dry contact closures integrated system. ElectroShades and
to control the ElectroShade system. MechoShade fully
® ®
controllers are tested and approved by
warranties ElectroShade controllers and motors as an ETL as a complete system. Since 1876
®
IQ/MLC A IQ/MLC B
MLC A MLC B
12VDC
12VDC 6-conductor modular cable
12VAC
12VAC J 12VAC
12VDC
Dry Contact A/V
A/V Closure System
System
Dry Contact
For the proper dry contact pin positions for any of the above systems see the ElectroShade® Low Voltage Interface
page in the Controls Section.
© Copyright 2004, MechoShade Systems, Inc., Long Island City, NY. MechoShade and ElectroShade are registered trademarks of, and DoubleShade, IQ/MLC, MLC, MLC/2 are trademarks of, MechoShade Systems, Inc.
Specifications subject to change without notice.
http://SolarControlLLC.com
Solar Control, LLC | 888-550-4836
NOTES
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
© Copyright 2004, MechoShade Systems, Inc., Long Island City, NY. MechoShade and ElectroShade are registered trademarks of, and Suburban/2 is a trademark of, MechoShade Systems, Inc.
Specifications subject to change without notice.
http://SolarControlLLC.com