Professional Documents
Culture Documents
Clamp Force: minimum 1,470 lbs / 652 daN 1,250 lbs / 563 daN 1,250 lbs / 563 daN
maximum 4,000 lbs / 1,800 daN 2,500 lbs / 1,125 daN 2,500 lbs / 1,125 daN
Clamping Method Hydraulic & Power Soft Clamp Hydraulic & Manual Hydraulic & Manual
Backgauge Control Power Power Power
DIMENSIONS
Table Space: in front of knife 24-1/2” / 62 cm 24-1/4” / 61.6 cm 15-1/4” / 38.7 cm
behind knife 28” / 71.1 cm 24” / 61.0 cm 20” / 50.8 cm
Side Tables 13-1/2” x 16” / 34.3 x 40.6 cm 13-1/2” x 16” / 34.3 x 40.6 cm 8” x 8” / 20.3 x 20.3 cm
Optional Side Tables 18”x20” / 46 x 51 cm
Minimum opening required thru door: 54” / 137 cm 43” / 109 cm 36-1/4” / 92 cm
Table, treadle & light beam off: 31” / 79 cm 29” / 74 cm 29” / 74 cm
Net Weight (approximate) 1780 lbs / 808 kg 1000 lbs / 454 kg 800 lbs / 363 kg
Shipping Weight (approximate) 2020 lbs / 917 kg 1250 lbs / 567 kg 920 lbs / 418 kg
ELECTRICAL CE
Titan 265 Motor 5 H.P., 208/230 Volts, 60 Hz, 3 Phase, AC, 25 Amps. Service size 30 Amps.
Optional Motors: 5 H.P., 208/230 Volts, 60 Hz, 1 Phase, AC, 30 Amps. Service size 40 Amps.
5 H.P., 208/230 Volts, 50 Hz, 1 Phase, AC, 30 Amps. Service size 40 Amps.
5 H.P., 380/415 Volts, 50 Hz, 3 Phase, AC, 15 Amps. Service size 20 Amps.
Titan 230 Motor 1-1⁄2H.P., 230 Volts, 60 Hz, 1 Phase, AC, 12 Amps. Service size 15 Amps. Requires receptacle type:
NEMA6-15R or 6-20R. (Optional 50 Hz, 1 phase available)
Titan 200 Motor 1-1⁄2H.P., 230 Volts, 60 Hz, 1 Phase, AC, 12 Amps. Service size 15 Amps. Requires receptacle type:
NEMA6-15R or 6-20R. (Optional 50 Hz, 1 phase available)
Challenge reserves the right to make changes to any product or specification without notice and without incurring responsibility to existing units.
SPEED SAFETY
The keypad features an advanced, light touch variable- Standard equipment includes the finest Category 4
speed pinpoint backgauge control to quickly position stock. light curtain to monitor the cutter opening. These
Depending on the portion of the pin-point control you self-checking beams ensure the highest degree of
touch, the backgauge moves forward or backward at varying safety for the operator.
speeds. Or, simply type in the desired position and press the
“Send” key. The computer positions the backgauge prior to
each cut for maximum productivity.
AND LOGIC
A high-contrast red LED (Titan 200 and 230 only)
An advanced computer program monitors and diag- allows for better visibility and has a long service
noses cutter operations. Sophisticated sensor arrays life. The floating fingers ensure paper does not get
detect backgauge position and mechanical cutting trapped under the backgauge.
sequences. If a problem is detected, the computer
will shut down the machine, and display an error
message to simplify troubleshooting.
STANDARD FEATURES
• Hydraulic Clamping and Cutting • Safety Devices
• Adjustable Clamp Pressure – Light Beam
• Proudly manufactured in the USA – Mechanical knife safety latch
• 2 year warranty – Two-Hand, monitored cut buttons
• CE – Enclosed rear table
Each cutter includes two knives, three plastic cutting sticks, jogging aid, tool kit, and operator’s manual.
The XT console (Titan 265 only) is The XG console (Titan 265 only) The Titan 200/230 controller offers
a Windows-based 10.4” color touch- offers menu - driven prompts, a simple and intuitive menu-
screen controller, giving you better programmable clamp pressure and driven LCD interface.
visual cutting prompts and more job gives operator a graphical depiction
storage capabilities. of the job.
Clamp Force: minimum 1,470 lbs / 652 daN 1,250 lbs / 563 daN 1,250 lbs / 563 daN
maximum 4,000 lbs / 1,800 daN 2,500 lbs / 1,125 daN 2,500 lbs / 1,125 daN
Clamping Method Hydraulic & Power Soft Clamp Hydraulic & Manual Hydraulic & Manual
Backgauge Control Power Power Power
DIMENSIONS
Table Space: in front of knife 24-1/2” / 62 cm 24-1/4” / 61.6 cm 15-1/4” / 38.7 cm
behind knife 28” / 71.1 cm 24” / 61.0 cm 20” / 50.8 cm
Side Tables 13-1/2” x 16” / 34.3 x 40.6 cm 13-1/2” x 16” / 34.3 x 40.6 cm 8” x 8” / 20.3 x 20.3 cm
Optional Side Tables 18”x20” / 46 x 51 cm
Minimum opening required thru door: 54” / 137 cm 43” / 109 cm 36-1/4” / 92 cm
Table, treadle & light beam off: 31” / 79 cm 29” / 74 cm 29” / 74 cm
Net Weight (approximate) 1,780 lbs / 808 kg 1,000 lbs / 454 kg 800 lbs / 363 kg
Shipping Weight (approximate) 2,020 lbs / 917 kg 1,250 lbs / 567 kg 920 lbs / 418 kg
ELECTRICAL CE
Titan 265 Motor 5 H.P., 208/230 Volts, 60 Hz, 3-Phase, AC, 25 Amps. Service size 30 Amps.
Optional Motors: 5 H.P., 208/230 Volts, 60 Hz, 1-Phase, AC, 30 Amps. Service size 40 Amps.
5 H.P., 208/230 Volts, 50 Hz, 1-Phase, AC, 30 Amps. Service size 40 Amps.
5 H.P., 380/415 Volts, 50 Hz, 3-Phase, AC, 15 Amps. Service size 20 Amps.
Titan 230 Motor 1-1⁄2 H.P., 230 Volts, 60 Hz, 1-Phase, AC, 12 Amps. Service size 15 Amps. Requires receptacle type:
NEMA6-15R or 6-20R. (Optional 50 Hz, 1-phase available)
Titan 200 Motor 1-1⁄2 H.P., 230 Volts, 60 Hz, 1-Phase, AC, 12 Amps. Service size 15 Amps. Requires receptacle type:
NEMA6-15R or 6-20R. (Optional 50 Hz, 1-phase available)
Challenge reserves the right to make changes to any product or specification without notice and without incurring responsibility to existing units.