Professional Documents
Culture Documents
During the design, how can we show the failure members in different
color? select>by spec>all failed beams
2. Explain: Translational repeat > Generation flags
All-geom,prop,load,support,design parameters etc
Geom only,geom and prop only
3. Explain: Member release
Generally, all fx,fy,fz,mx,my,mz is transferred to next
beam via nodez, if we hav to block any of those forces
separately. We hav to mention that using member release
4. Explain: Member Truss
Command>member spec> truss
cant handle bending/ torsion/ shear load
5. Explain the application of BEAVA page253
Traffic Lanes, critical location of udl/knife load/vehicle load,
Asociated load value(influence surfaz)
6. Explain: Response Spectrum
Dynmic to analyse the structure for seismic loading. We calculate
joint displacement.member forces and support reactions. Can
use sqr root of the sum of sqrz, 10 % or absolute method to
derive the result. The result along static is considered before
design.load can b +ve or ve to consider seismic reversibility.
7. Explain Surcharge for loading in isolated foundation design.
8. Explain: Combined footing > Fixed left / right overhang
Left/right over hang value will be fixed or else it will be designed
as per requirement
9. Explain: Mat foundation > Add Meshing Regions
Mat foundation job>mesh generation>add mesh region
1. Using polylines
2. Add rectangular
3. Add circular region
4. Regular polygon
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
1 kg = 0.009807KN
1 inch = 2.5400 cm
1 m=3.280840 ft
1 m2=10.763910 ft2
1kg=2.204780 pound