Professional Documents
Culture Documents
Action Plan:
Issue the following commands:
bldmds-core1# show system redundancy status
Redundancy mode
--------------administrative: HA
operational: HA
This supervisor (sup-1)
----------------------Redundancy state: Active
Supervisor state: Active
Internal state: Active with HA standby
Other supervisor (sup-2)
-----------------------Redundancy state: Standby
Supervisor state: HA standby
Internal state: HA standby
(This is an example from our MDS in our lab, if this output matches what
you see after issuing this command, proceed to the next step)
bldmds-core1# show module
Mod Ports Module-Type
Model
Status
--- ----- -------------------------------- ------------------ -----------1 22 4x1GE IPS, 18x1/2/4Gbps FC Modu DS-X9304-18K9
ok
2 22 4x1GE IPS, 18x1/2/4Gbps FC Modu DS-X9304-18K9
ok
3 16 1/2 Gbps FC Module
DS-X9016
ok
4 16 1/2 Gbps FC Module
DS-X9016
ok
5 0
Supervisor/Fabric-1
DS-X9530-SF1-K9 active * <=== This is the
current active supervisor
6 0
Supervisor/Fabric-1
DS-X9530-SF1-K9 ha-standby <=== This will
become the new active supervisor
7 16 1/2 Gbps FC Module
DS-X9016
ok
8 48 1/2/4 Gbps FC Module
DS-X9148
ok
Mod Sw
--- -------------1 3.3(1c)
2 3.3(1c)
3 3.3(1c)
Hw
-----1.1
1.1
8.0
World-Wide-Name(s) (WWN)
-------------------------------------------------20:01:00:0d:ec:20:bf:80 to 20:12:00:0d:ec:20:bf:80
20:41:00:0d:ec:20:bf:80 to 20:52:00:0d:ec:20:bf:80
20:81:00:0d:ec:20:bf:80 to 20:90:00:0d:ec:20:bf:80
4
5
6
7
8
3.3(1c)
3.3(1c)
3.3(1c)
3.3(1c)
3.3(1c)
7.0
5.4
5.4
7.0
1.5
20:c1:00:0d:ec:20:bf:80 to 20:d0:00:0d:ec:20:bf:80
--21:81:00:0d:ec:20:bf:80 to 21:90:00:0d:ec:20:bf:80
21:c1:00:0d:ec:20:bf:80 to 21:f0:00:0d:ec:20:bf:80
3
4
5
6
7
8
3.3(1c)
3.3(1c)
3.3(1c)
3.3(1c)
3.3(1c)
3.3(1c)
8.0
7.0
5.4
5.4
7.0
1.5
20:81:00:0d:ec:20:bf:80 to 20:90:00:0d:ec:20:bf:80
20:c1:00:0d:ec:20:bf:80 to 20:d0:00:0d:ec:20:bf:80
--21:81:00:0d:ec:20:bf:80 to 21:90:00:0d:ec:20:bf:80
21:c1:00:0d:ec:20:bf:80 to 21:f0:00:0d:ec:20:bf:80
To clear counters
bldmds-core1# attach mod 1 (repeat this for all line card modules in each switch)
module-1# clear asic-cnt all
module-1# exit
bldmds-core1# clear counters interface all (repeat this for all 6 MDS switches)
F1tfabA
m9500-sf2ek9-kickstart-mz.3.1.2a.bin
16604160 Aug 22 05:17:30 2009 m9500-sf2ek9-kickstart-mz.3.3.1c.bin
77350425 May 27 23:35:04 2008 m9500-sf2ek9-mz.3.1.2a.bin
78718938 Aug 22 05:18:10 2009 m9500-sf2ek9-mz.3.3.1c.bin
delete bootflash: m9500-sf2ek9-kickstart-mz.3.3.1c.bin
delete bootflash:m9500-sf2ek9-mz.3.3.1c.bin
Duplicate WWPN Error Fix
switch#(config)# dpvm overwrite-duplicate-pwwn