Professional Documents
Culture Documents
Q.5
Q.6
Q.7
Q.8
Q.9
Q.10
Q.11
Q.12
Q.13
Q.14
Q.15
Q.16
Q.17
Q.18
Q.19
Q.20
Q.21
Q.22
Q.23
Q.24
Q.25
The material, which is slightly magnetic in nature & exhibits greenish blue in rapid
action nitric acid test ( 9A- 99)
a) Monel*
b) Carbon steel
c) Pure nickel
d) 18-8 steel
What should be the position of the chokes, when the a/c is being fueled
a) It should be placed close to the wheels to prevent any movement
b) It should be moved a short distance away from the tires *(CAIP)
c) The chokes should not be placed, only wheel brakes to be applied
d) Only Main wheel should have the chokes.
Out of the following which synthetic material used for flexible hoses, has the
excellent resistance to the petroleum product ( 9A- 100)
a)Neoprene
b) Buna N*
c) Butyl
d) None is correct
The purpose of self sealing quick disconnect valve, installed in the hydraulic
system( 9A- 495)
a) To prevent leakage of fuel from a/c to the ground trolley.
b) To permit connection of flexible hose from the test rig to the aircraft
c) To quickly disconnect the hydraulic system in case of engine fire
d) All are correct statements *
MTCS regarding variable delivery pumps
a) These deliver fixed quantity of fuel / revolution irrespective to position
b) These deliver variable quantity of fuel, to meet the requirements of the system
c) As in (a) & the output is changed automatically as per the hydraulic fluid
d) As in (b) & the output is changed automatically within the pump*
For removing the damaged rivets, which type of punch is used ( 9A- 531)
a) Drive punch or taper punch*
b) Prick punch
c) Hollow punch
d) Both (a) & (b)
To make ferrous to vastly superior (9A- 195)
a) Carbon is added with iron by 1.25 to 1.5 %
b) Carbon is added approximately up to 1%*
c) Copper is added to 0.5%
d) Ni & Cr are added by 0.5 & 0.75 %
The Aluminum alloys are more susceptible to corrosion if small % of -- is added (9A198)
a) Manganese
b) Copper *
c) Chromium d) Silicon
In the a/c construction of stingers, bulk head skin etc. are generally made of
a) casting Aluminum alloy
b) wrought aluminum alloy *
c) Pure Aluminum
d) All as above (9A)
What is Austenite ( 9A)
a) Alloy of titanium
b) A solid solution in which carbon is dissolved at the elevated temperature *
c) During the heat treatment the carbon precipitate & the carbide particles to make
steel very hard
d) Titanium alloy crystal - C
The effect of the rise temperature on high resistance alloy Manganin/ Eureka
a) Increases linear with wide range of temperature
b) Increases linear , but becomes irregular after certain temperature
c) Increases the resistances small but irregular
d) Fairly remains constant & does not vary with temperature *(Negligible)
AN aluminum alloy bolts are marked as (9A-122)
a) The raised dash
b) The raised asterisk
c) Two raised dashes *
d) Raised Triangle
The hose material of which synthetic material is not affected by any type of unknown
fuel or petroleum product (9A- 102 )
a) Buna _ N
b) Neoprene
c) Butyl
d) None is correct *
Q.26
Q.27
Q.28
Q.29
Q.30
Q.31
Q.32
Q.33
Q.34
Q.35
Q.36
Q.37
Q.38
Q.39
Q.40
Q.41
Q.42
Q.43
Q.44
Q.45
Q.46
Q.47
Q.48
Q.49
Q.50
Q.51
Q.52
Q.53
Q.54
Q.55
Q.56
Q.57
a) Knife
b) Three- square*
c) Ward
d) Mill
The flaring tools used for aircraft tubing , should have their dies generally ground to
produce flare of ( 9A 111)
a) 35 to 37 degrees*
b) 30 to 32 degrees
c) 33 to 35 degrees
d) 45 to 50 degrees
The hydraulic portable plant used for the ground servicing of a/c (9A- 495)
a) Is used for draining out the hydraulic fluid
b) Is used for filtering the hydraulic fluid
c) Is used for refilling of the filtered fuel in the aircraft d) All are correct*
The flexible hoses are used in the aircraft plumbing for (9A - 100)
a) To connect the Stationary parts with another stationary part
b) To connect the moving part with other stationary part*
c) To connect one moving part with another moving part
d) To connect the parts, which are not subjected to vibrations
Which type of cable are used in the aircraft for actuating the secondary & the engine
controls (9A-143)
a) 7 x 7*
b) 7 x 19
c) 7 x 12
d) None is correct
In the turn buckle, the end identified by a grove or knurl, has which type of threads
(9A-144)
a) Right hand threads
b) Left hand Threads *
c) There are no threads, as it is push locked.
Which method is used to relieve the stress corrosion on stressed parts
a) Heating parts to a specific temperature in an annealing oven and then cooling
slowly.*
b) By compressive stress
c) Heating parts to a specific temperature in an annealing oven and then cooling
suddenly
d) All are incorrect
Which composite has high tensile & low compressive strength
a) Boron
b) Kevlar
c) Aramid*
d) Fiber reinforced
Mark the odd pair out , regarding the colour coding of Aluminum alloys
a) 7075 Green ( 9A- 100)
b) 2024 Red*
c) 6053-Purple
d) 1100-Gray
The double flaring is generally not necessary in case of ( 9A- 111)
a) Copper tubing
b) Hard aluminum tubing
c) Steel tubing*
d) only (a) is incorrect
As per the classification of fires by FAA , the Class B fire deals with
a) The flammable petroleum products ( 9A- 500)
b) The flammable combustible liquids
c) Flammable grease, solvent and paints etc
d) All are correct*
Identify the bolt head
( 9A 122)
a) AN Standard steel bolt
b) Special bolt
c) AN Standard steel bolt corrosion resistant
*
d) None is correct
Which type of screw driver, both grips the screw & rotates it ( 9A- 530)
a) The Phillips screw driver
b) The speed handle screw driver
c) The Ratchet Screw driver*
d) None is correct
Which of the following is the head of special bolt ( 9A- 122)
a)*
b)
c)
The aircraft bolts are fabricated from ( 9A- 122)
a) Cadmium or zinc plated corrosion resistant steel
b) Un- plated corrosion resistant steel
d)
Q.58
Q.59
Q.60
Q.61
Q.62
Q.63
Q.64
Q.65
Q.66
Q.67
Q.68
Q.69
Q.70
Q.71
Q.72
Q.73
Q.74
Q.75
Q.76
Q.77
Q.78
Q.79
Q.80
Q.81
Q.82
Q.83
b) The spirit level is used for lateral leveling by placing at landing gear lateral c) For
checking both lateral & longitudinal leveling , plumb bob is also used d) All are
correct *
The damaged threads are replaced by (9A 137)
a) The threaded bushing
b) The helical inserts
c) The fasteners sleeve
d) All are correct*
The nut coded as AN310D5R, the digit 5 means ( 9A- 130)
a) The diameter is 5/16 inches *
b) The diameter is 5/8 inches
c) The diameter is 5/32 inches
d) None is correct
In SAE XXXX series, the first digit indicates (9A- 195)
a) The type of steel *
b) % age of carbon
c) The %age of Nickel
d) The %age of Chromium
MTCS regarding the structural screws( 9A- 135)
a) They differ from the structural bolts , only by their lengths
b) Both structural screws & bolts are made from different materials
c) The structural screws are provided with a definite grip length*
d) All statements are correct
The Oxygen gas is
a) Chemically stable & non flammable
b) The combustible material ignite more rapidly and burn with greater intensity in
the presence of oxygen
c) When Oxygen combines with oil & grease etc. their mixture is very sensitive for
burning
d) All are correct *
The melting point of silver soldering
a) 400 600 C
b) 600 850 C*
c) 800 1000C
The defects in the composites are checked by
a) The coin tap test b) UST c) laser holography
d) All*
While installing the turn buckle in a control system( 9A- 144)
a) The number of turns, screwed on both sides can be different
b) The turn buckle terminals should be screwed in the barrels , such as not more
than three threads are exposed on either side*
c) The turn buckles are installed for making major adjustments in the cable
assemblies
d) All are correct
Why in the case of Oxy- Acetylene welding , the Oxygen gas cylinders are double
seated and in the case of acetylene cylinders , it is single seated
a) Because of the different volumes of gases
b) Because of the different levels of the working pressures of both gases*
c) Because of the different temperatures of both the gases
d) All are correct
The term EICAS stand for
a) Engine Indicating and Crew Alerting System*
b) Engine Indicating and Annunciating System
c) Electronic Instrument and Crew Annunciating
d) Electronic Instrument and Centralized Audio System
The bolt which is always used only for shear loads and never for tensile
a) The Eye bolt
b) The Jo- bolt
c) The clevis bolt* d) None ( 9A-123)
Q.84
Q.85
Q.89
Q.90
Q.91
Q.92
Q.93
Q.94
Q.95
Q.96
Q.97
Q.98
What is the name of the bolt , with a triangle marking on the head
a) The close tolerance bolt*
b) AN standard bolt
c) The Re-worked bolt
d) The clevis bolt
The 5056 rivet used for riveting, alloy structure of which material (9A- 151)
a) Steel
b) Magnesium *
c) Copper
d) Aluminum
Which of the following is included in the empty weight of the aircraft
a) The permanent ballast*
b) The weight of the instruments to be depending on the flights to flights
c) The weight of extra items like jacks etc. required to be taken in flights
d) All are correct
The movable parts of the Micro meter are ( 9A- 545)
a) Thimble
b) Barrel
c) Spindle
d) Both (a) & (c)*
Identify the part in the twist drill
a) The body
b) The point
b) The margin
c) The Flute*
For the identification of fluid lines used in a/c, the Yellow and blue lines
a) Indicate hydraulic*
( 9A-102)
b) Indicate Lubrication
c) Indicate Air condition
d) Indicate De- icing
Te primary purpose of the weight & balance aspect of the aircraft is
a) The efficiency
b) The safety*
c) The Airworthiness
d) All are correct
The Magnetic test of distinguishing between Annealing Austenite, indicating the nonmagnetic and rapid action & greenish blue indication with nitric acid
a) The material is Monel
b) The material is pure Nickel
c) The material is Nickel steel *
d) None is correct (9A- 99)
For an aircraft, the distance of empty weight CG from datum is 160, the leading edge
of MAC 140 and length of MAC is 100, what is the CG in % of MAC ( 160-140)/100 ))
( 9A- 59)
a) 20%
b) 25%
c) 50%
d) 75%
What is the zero fuel load (9A-58)
a) Dry weight of a/c + weight of all crew, passengers & cargo
b) Basic Operating weight without fuel, crew & cargo
c) Maximum permissible of the aircraft without fuel *
d) None is correct
When two rivets join two plates & force is applies to separate both the sheets from
each other, which type of stress is developed (15A- )
a) Bending
b) Tensile
c) Shear
d) None is correct
MTCS regarding weighing of the aircrafts ( 9A- 63 &70)
a) The heavy aircrafts are weighed by the weighing scales
b) The light aircrafts are weighed by the Load cells.
c) The aircrafts should be weighed on a hard and level surface *
d) All statements are correct
The Fabric coating of the aluminum alloys is done for prevention against
a) The effect of magnetism
b) The effects of electric shock
c) The effects of ultra violet rays*
d) All are correct
Q.99
The gear with teeth radially arrayed on the rim parallel to its axis , is
a) The SPUR gear*
b) The Rack gear
c) The gear & Pinion
d) None is correct
Q.100 The type of linear actuator that comprises a pair of gears which convert rotational
motion into linear motion
a) The SPUR gear
b) The Rack gear*
c) The gear & Pinion
d) None is correct