You are on page 1of 2

TYPICAL WIRING DIAGRAM

053-136
ISSUE 2

DEEP SEA ELECTRONICS

DSE335 INSTALLATION INSTRUCTIONS

ACCESSING THE FRONT PANEL EDITOR (FPE)

Press and hold the the


button.
If a module security PIN has been set, the PIN number request is then shown .

Press
value.

Press
(right) when the first digit is correctly entered. The digit you have just entered will now
show # for security.

The other digits of the PIN number. You can press


of the previous digits.

When
is pressed after editing the final PIN digit, the PIN is checked for validity. If the number is
not correct, you must re-enter the PIN.
If the PIN has been successfully entered (or the module PIN has not been enabled), the editor is
displayed.

, the first # changes to 0. Press

(up) or

(down) to adjust it to the correct

(left) if you need to move back to adjust one

EDITING A PARAMETER

Press the Press the

Press the
page.

When viewing the parameter to be changed, press the

When editing the scheduler, press the


the scheduler.

Press the

or

Press the

button the save the current value, the value ceases flashing.

Press and hold the

or

or

buttons to cycle to the section you wish to view/change.

buttons to select the next parameter or previous parameter within the current

or

button. The value begins to flash.

button to move between the various parameters of

buttons buttons to adjust the value to the required setting.

button to exit the editor.

DIMENSIONS AND MOUNTING


For flat surface mounting in a type 1 enclosure and use in a pollution degree 2 environment.

DIMENSIONS

PANEL CUTOUT

WEIGHT

240 mm x 181 mm x 41 mm
(9.4 x 7.1 x 1.6)

220 mm x 160 mm
(8.7 x 6.3)

680 g
(0.68 kg)

Deep Sea Electronics Plc.


Tel: +44 (0)1723 890099
Fax: +44 (0)1723 893303
Email: support@deepseaplc.com
Web: www.deepseaplc.com

Deep Sea Electronics inc.


Phone: +1 (815) 316-8706
Fax: +1 (815) 316- 8708
TOLL FREE (USA only)
Tel: +1 866 636 9703
Email: support@deepseausa.com
Web: www.deepseausa.com

FRONT PANEL CONFIGURATION EDITOR


Page

Parameter

Values

DISPLAY

LCD Contrast
Language
LCD Page Timer
Scroll Delay
Date and Time
S2 Option
Immediate S2 Dropout
Under Voltage Trip (Generator Option)
Over Voltage Trip (Generator Option)
Under Frequency Trip (Generator Option)
Over Frequency Trip (Generator Option)
Under Voltage Trip (Mains Option)
Over Voltage Trip (Mains Option)
Under Frequency Trip (Mains Option)
Over Frequency Trip (Mains Option)
S1 Option
Immediate S1 Dropout
Under Voltage Trip
Over Voltage Trip
Under Frequency Trip
Over Frequency Trip
S1 Transient Delay
Start Delay
Warming Up Time
S2 Fail Delay
Elevator Delay
Non-sync Transfer Time
Check-Sync Transfer time
Return Delay
Cooling Time
Fail to Stop Enable
Fail to Stop Delay
S2 Transient Delay
Scheduler Enable
Bank 1 Run Mode
Bank 1 Period
Bank 1 Event 1 Week
Bank 1 Event 1 Day
Bank 1 Event 1 Start Time
Bank 1 Event 1 Duration
Bank 1 Event 2 Week
Bank 1 Event 2 Day
Bank 1 Event 2 Start Time
Bank 1 Event 2 Duration
Bank 1 Event 3 Week
Bank 1 Event 3 Day
Bank 1 Event 3 Start Time
Bank 1 Event 3 Duration
Bank 1 Event 4 Week
Bank 1 Event 4 Day
Bank 1 Event 4 Start Time

0%
English
hh:mm:ss
hh:mm:ss
dd-mm-yyyy, hh:mm:ss
Generator, Mains
Inactive, Active
0V
0V
0.0 Hz
0.0 Hz
0V
0V
0.0 Hz
0.0 Hz
Generator, Mains
Inactive, Active
0V
0V
0 Hz
0 Hz
mm:ss
hh:mm:ss
hh:mm:ss
mm:ss
mm:ss
mm:ss.s
mm:ss.s
hh:mm:ss
hh:mm:ss
Inactive, Active
mm:ss
s.s
Inactive, Active
Off Load, On Load, Do Not Transfer
Weekly, Monthly
1-4
Monday to Sunday
hh:mm
hh:mm
1-4
Monday to Sunday
hh:mm
hh:mm
1-4
Monday to Sunday
hh:mm
hh:mm
1-4
Monday to Sunday
hh:mm

S2

S1

TIMERS

SCHEDULER

Page

Parameter

Values

SCHEDULER

Bank 1 Event 4 Duration


Bank 1 Event 5 Week
Bank 1 Event 5 Day
Bank 1 Event 5 Start Time
Bank 1 Event 5 Duration
Bank 1 Event 6 Week
Bank 1 Event 6 Day
Bank 1 Event 6 Start Time
Bank 1 Event 6 Duration
Bank 1 Event 7 Week
Bank 1 Event 7 Day
Bank 1 Event 7 Start Time
Bank 1 Event 7 Duration
Bank 1 Event 8 Week
Bank 1 Event 8 Day
Bank 1 Event 8 Start Time
Bank 1 Event 8 Duration
Bank 2 Run Mode
Bank 2 Period
Bank 2 Event 1 Week
Bank 2 Event 1 Day
Bank 2 Event 1 Start Time
Bank 2 Event 1 Duration
Bank 2 Event 2 Week
Bank 2 Event 2 Day
Bank 2 Event 2 Start Time
Bank 2 Event 2 Duration
Bank 2 Event 3 Week
Bank 2 Event 3 Day
Bank 2 Event 3 Start Time
Bank 2 Event 3 Duration
Bank 2 Event 4 Week
Bank 2 Event 4 Day
Bank 2 Event 4 Start Time
Bank 2 Event 4 Duration
Bank 2 Event 5 Week
Bank 2 Event 5 Day
Bank 2 Event 5 Start Time
Bank 2 Event 5 Duration
Bank 2 Event 6 Week
Bank 2 Event 6 Day
Bank 2 Event 6 Start Time
Bank 2 Event 6 Duration
Bank 2 Event 7 Week
Bank 2 Event 7 Day
Bank 2 Event 7 Start Time
Bank 2 Event 7 Duration
Bank 2 Event 8 Week
Bank 2 Event 8 Day
Bank 2 Event 8 Start Time
Bank 2 Event 8 Duration

hh:mm
1-4
Monday to Sunday
hh:mm
hh:mm
1-4
Monday to Sunday
hh:mm
hh:mm
1-4
Monday to Sunday
hh:mm
hh:mm
1-4
Monday to Sunday
hh:mm
hh:mm
Off Load, On Load, Do Not Transfer
Weekly, Monthly
1-4
Monday to Sunday
hh:mm
hh:mm
1-4
Monday to Sunday
hh:mm
hh:mm
1-4
Monday to Sunday
hh:mm
hh:mm
1-4
Monday to Sunday
hh:mm
hh:mm
1-4
Monday to Sunday
hh:mm
hh:mm
1-4
Monday to Sunday
hh:mm
hh:mm
1-4
Monday to Sunday
hh:mm
hh:mm
1-4
Monday to Sunday
hh:mm
hh:mm

You might also like