Professional Documents
Culture Documents
Robbins 97RL
Dimensions
The Robbins 97RL is a high power and low profile
raise drill, specially designed for mines with size
and weight restrictions. Despite its low profile, the
97RL is one of the largest raise drills ever produced.
Recommended diameter range is 2.4 up to 5.0 m
(8-17 ft.).
Model
97RL-DC
HEIGHT [m]
Extended Retracted
4,38
4,38
WIDTH [m]
LENGTH [m]
2,26
3,32
Optional Equipment
Electric Drive System
The DC drive has been refined greatly over the past 2 decades
and has become a very reliable and versatile drive. This drive
system has proven performance on larger raises where low rpm
must be accompanied by high torque. Because of the variable
rpm and good torque limiting control, the DC drive is best suited
for medium to large diameter size machines. Since 1992
digitally controlled DC drives have been used on raise drills.
Air and diesel powered crawlers has been adapted for use in
transporting and erecting the derrick assembly. The crawler
offers complete independence from the mine infrastructure for
transport and erect the machine. All crawlers are remote
controlled, either by cord or radio controlled.
Specifications
97RL-DC (Metric)
97RL-DC (Imperial)
RAISE DIAMETER
Nominal
Range*
4.0 m
2.4-5.0 m
13 ft.
8-17 ft.
RAISE LENGTH
Nominal
Maximum*
600 m
1010 m
1640 ft.
3310 ft.
DRILL PIPE
Diameter
Length, s/s
327 mm
1 524 mm
12-7/8 in.
60 in.
PILOT HOLE
Diameter
349 mm
13-3/4 in.
REAMING TORQUE
447 000 Nm
REAMING THRUST
6 845 kN
POWER
300 kW
400 Hp
MAIN DRIVE
DC motor
DC motor
DIP ADJUSTMENT
DERRICK WEIGHT
27 200 kg
60 000 lbs.
Sled Erector
Pipeloader
The remote controlled groundloading pipeloader contributes to improved raise boring efficiency. The unit can be
mounted on either side of the mainframe, which makes the
raise boring machine more adaptable to individual site
requirements.
Customer Service
Support
commissioning includes start-up, daily
maintenance and operational training
Upgrade Kits
Robbins Raise Drills have proven to last for a
long time. Many of the units manufactured
since 1962 are still in production. To ensure
that these units will continue working at a
reasonable cost with minimum down time and
maximum productivity, we have developed a
range of upgrade kits that can be fitted to the
machines.
DIAMETER
DEPTH
Model
Nominal
[m]
Range*
[m]
Nominal
[m]
Range*
[m]
34RH
44RH
1.2
1.5
0.6 - 1.5
1.0 - 1.8
340
250
610
610
53RH
73RM
1.8
2.4
1.2 - 2.4
1.2 - 2.4
490
490
650
650
83RM
97RL
4.0
4.0
2.4 - 5.0
2.4 - 5.0
500
600
1010
1010
123RM
4.8
3.1 - 6.0
920
1100
9851 2121 01