Professional Documents
Culture Documents
Course
: ECE202
Class NBR
: 1638
Time
Slot: F2
Max.Marks:100
Three Hours
(Use smithchart wherever necessary)
Answer ALL Questions
1.(a)
[8]
of 20 nF. Find i) propagation velocity, ii) phase constant at a frequency of 100 kHz and
iii) characteristic impedance of a line.
OR
1.(b)
[8]
impedance = 50 , attenuation = 0.02 m-1 , phase velocity = 0.6 times the velocity of light.
Determine R, L, G, C and wavelength at 0.1 GHz.
2.
[6]
operating at 300 MHz is 50 +j50. Calculate VSWR, reflection coefficient and return loss.
3.
[6]
load impedance of 35-j25 . Find the reflection coefficient at the load as well as at the
input of the line.
4.
What is dispersion? Prove that in a distortionless line, attenuation constant and phase
[8]
Prove that a short circuited transmission line is equivalent to a series resonant circuit and
[8]
[12]
3 GHz. The circuit is realized on an alumina substrate of thickness 1mm and relative
permittivity of 9.6.
7.
Explain various electromagnetic noise sources that causes interference to the signal
propagating through the transmission line.
Page 1 of 2
[8]
8.(a)
A load impedance 40-j20 is connected to lossless line of length 0.3 and characteristic
[12]
The double stub method is used to match a load admittance of 100-j200 Siemens to a
[12]
lossless transmission line of characteristic admittance of 200 Siemens. Double stub tuners
are spaced by quarter wavelength apart to match the load to the line. Find the required
length of the short circuited shunt stub.
9.
A single stub tuner is to match a lossless line of 400 to a load of 400 j800 . The
[12]
frequency is 3 GHz.
a) Find the distances from the load to the short circuited shunt stub
b) Determine the length of the short circuited shunt stubs.
10.
[8]
Determine the possible TE and TM modes that can propagate through the waveguide.
11.
Page 2 of 2
[12]